URL
https://opencores.org/ocsvn/or1k/or1k/trunk
Subversion Repositories or1k
[/] [or1k/] [trunk/] [gdb-5.3/] [gdb/] [arm-tdep.c] - Rev 1181
Go to most recent revision | Compare with Previous | Blame | View Log
/* Common target dependent code for GDB on ARM systems. Copyright 1988, 1989, 1991, 1992, 1993, 1995, 1996, 1998, 1999, 2000, 2001, 2002 Free Software Foundation, Inc. This file is part of GDB. This program is free software; you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free Software Foundation; either version 2 of the License, or (at your option) any later version. This program is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for more details. You should have received a copy of the GNU General Public License along with this program; if not, write to the Free Software Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. */ #include <ctype.h> /* XXX for isupper () */ #include "defs.h" #include "frame.h" #include "inferior.h" #include "gdbcmd.h" #include "gdbcore.h" #include "symfile.h" #include "gdb_string.h" #include "dis-asm.h" /* For register flavors. */ #include "regcache.h" #include "doublest.h" #include "value.h" #include "arch-utils.h" #include "solib-svr4.h" #include "arm-tdep.h" #include "gdb/sim-arm.h" #include "elf-bfd.h" #include "coff/internal.h" #include "elf/arm.h" #include "gdb_assert.h" static int arm_debug; /* Each OS has a different mechanism for accessing the various registers stored in the sigcontext structure. SIGCONTEXT_REGISTER_ADDRESS should be defined to the name (or function pointer) which may be used to determine the addresses of the various saved registers in the sigcontext structure. For the ARM target, there are three parameters to this function. The first is the pc value of the frame under consideration, the second the stack pointer of this frame, and the last is the register number to fetch. If the tm.h file does not define this macro, then it's assumed that no mechanism is needed and we define SIGCONTEXT_REGISTER_ADDRESS to be 0. When it comes time to multi-arching this code, see the identically named machinery in ia64-tdep.c for an example of how it could be done. It should not be necessary to modify the code below where this macro is used. */ #ifdef SIGCONTEXT_REGISTER_ADDRESS #ifndef SIGCONTEXT_REGISTER_ADDRESS_P #define SIGCONTEXT_REGISTER_ADDRESS_P() 1 #endif #else #define SIGCONTEXT_REGISTER_ADDRESS(SP,PC,REG) 0 #define SIGCONTEXT_REGISTER_ADDRESS_P() 0 #endif /* Macros for setting and testing a bit in a minimal symbol that marks it as Thumb function. The MSB of the minimal symbol's "info" field is used for this purpose. This field is already being used to store the symbol size, so the assumption is that the symbol size cannot exceed 2^31. MSYMBOL_SET_SPECIAL Actually sets the "special" bit. MSYMBOL_IS_SPECIAL Tests the "special" bit in a minimal symbol. MSYMBOL_SIZE Returns the size of the minimal symbol, i.e. the "info" field with the "special" bit masked out. */ #define MSYMBOL_SET_SPECIAL(msym) \ MSYMBOL_INFO (msym) = (char *) (((long) MSYMBOL_INFO (msym)) \ | 0x80000000) #define MSYMBOL_IS_SPECIAL(msym) \ (((long) MSYMBOL_INFO (msym) & 0x80000000) != 0) #define MSYMBOL_SIZE(msym) \ ((long) MSYMBOL_INFO (msym) & 0x7fffffff) /* Number of different reg name sets (options). */ static int num_flavor_options; /* We have more registers than the disassembler as gdb can print the value of special registers as well. The general register names are overwritten by whatever is being used by the disassembler at the moment. We also adjust the case of cpsr and fps. */ /* Initial value: Register names used in ARM's ISA documentation. */ static char * arm_register_name_strings[] = {"r0", "r1", "r2", "r3", /* 0 1 2 3 */ "r4", "r5", "r6", "r7", /* 4 5 6 7 */ "r8", "r9", "r10", "r11", /* 8 9 10 11 */ "r12", "sp", "lr", "pc", /* 12 13 14 15 */ "f0", "f1", "f2", "f3", /* 16 17 18 19 */ "f4", "f5", "f6", "f7", /* 20 21 22 23 */ "fps", "cpsr" }; /* 24 25 */ static char **arm_register_names = arm_register_name_strings; /* Valid register name flavors. */ static const char **valid_flavors; /* Disassembly flavor to use. Default to "std" register names. */ static const char *disassembly_flavor; /* Index to that option in the opcodes table. */ static int current_option; /* This is used to keep the bfd arch_info in sync with the disassembly flavor. */ static void set_disassembly_flavor_sfunc(char *, int, struct cmd_list_element *); static void set_disassembly_flavor (void); static void convert_from_extended (void *ptr, void *dbl); /* Define other aspects of the stack frame. We keep the offsets of all saved registers, 'cause we need 'em a lot! We also keep the current size of the stack frame, and the offset of the frame pointer from the stack pointer (for frameless functions, and when we're still in the prologue of a function with a frame). */ struct frame_extra_info { int framesize; int frameoffset; int framereg; }; /* Addresses for calling Thumb functions have the bit 0 set. Here are some macros to test, set, or clear bit 0 of addresses. */ #define IS_THUMB_ADDR(addr) ((addr) & 1) #define MAKE_THUMB_ADDR(addr) ((addr) | 1) #define UNMAKE_THUMB_ADDR(addr) ((addr) & ~1) static int arm_frame_chain_valid (CORE_ADDR chain, struct frame_info *thisframe) { return (chain != 0 && (FRAME_SAVED_PC (thisframe) >= LOWEST_PC)); } /* Set to true if the 32-bit mode is in use. */ int arm_apcs_32 = 1; /* Flag set by arm_fix_call_dummy that tells whether the target function is a Thumb function. This flag is checked by arm_push_arguments. FIXME: Change the PUSH_ARGUMENTS macro (and its use in valops.c) to pass the function address as an additional parameter. */ static int target_is_thumb; /* Flag set by arm_fix_call_dummy that tells whether the calling function is a Thumb function. This flag is checked by arm_pc_is_thumb and arm_call_dummy_breakpoint_offset. */ static int caller_is_thumb; /* Determine if the program counter specified in MEMADDR is in a Thumb function. */ int arm_pc_is_thumb (CORE_ADDR memaddr) { struct minimal_symbol *sym; /* If bit 0 of the address is set, assume this is a Thumb address. */ if (IS_THUMB_ADDR (memaddr)) return 1; /* Thumb functions have a "special" bit set in minimal symbols. */ sym = lookup_minimal_symbol_by_pc (memaddr); if (sym) { return (MSYMBOL_IS_SPECIAL (sym)); } else { return 0; } } /* Determine if the program counter specified in MEMADDR is in a call dummy being called from a Thumb function. */ int arm_pc_is_thumb_dummy (CORE_ADDR memaddr) { CORE_ADDR sp = read_sp (); /* FIXME: Until we switch for the new call dummy macros, this heuristic is the best we can do. We are trying to determine if the pc is on the stack, which (hopefully) will only happen in a call dummy. We hope the current stack pointer is not so far alway from the dummy frame location (true if we have not pushed large data structures or gone too many levels deep) and that our 1024 is not enough to consider code regions as part of the stack (true for most practical purposes). */ if (PC_IN_CALL_DUMMY (memaddr, sp, sp + 1024)) return caller_is_thumb; else return 0; } /* Remove useless bits from addresses in a running program. */ static CORE_ADDR arm_addr_bits_remove (CORE_ADDR val) { if (arm_pc_is_thumb (val)) return (val & (arm_apcs_32 ? 0xfffffffe : 0x03fffffe)); else return (val & (arm_apcs_32 ? 0xfffffffc : 0x03fffffc)); } /* When reading symbols, we need to zap the low bit of the address, which may be set to 1 for Thumb functions. */ static CORE_ADDR arm_smash_text_address (CORE_ADDR val) { return val & ~1; } /* Immediately after a function call, return the saved pc. Can't always go through the frames for this because on some machines the new frame is not set up until the new function executes some instructions. */ static CORE_ADDR arm_saved_pc_after_call (struct frame_info *frame) { return ADDR_BITS_REMOVE (read_register (ARM_LR_REGNUM)); } /* Determine whether the function invocation represented by FI has a frame on the stack associated with it. If it does return zero, otherwise return 1. */ static int arm_frameless_function_invocation (struct frame_info *fi) { CORE_ADDR func_start, after_prologue; int frameless; /* Sometimes we have functions that do a little setup (like saving the vN registers with the stmdb instruction, but DO NOT set up a frame. The symbol table will report this as a prologue. However, it is important not to try to parse these partial frames as frames, or we will get really confused. So I will demand 3 instructions between the start & end of the prologue before I call it a real prologue, i.e. at least mov ip, sp, stmdb sp!, {} sub sp, ip, #4. */ func_start = (get_pc_function_start ((fi)->pc) + FUNCTION_START_OFFSET); after_prologue = SKIP_PROLOGUE (func_start); /* There are some frameless functions whose first two instructions follow the standard APCS form, in which case after_prologue will be func_start + 8. */ frameless = (after_prologue < func_start + 12); return frameless; } /* The address of the arguments in the frame. */ static CORE_ADDR arm_frame_args_address (struct frame_info *fi) { return fi->frame; } /* The address of the local variables in the frame. */ static CORE_ADDR arm_frame_locals_address (struct frame_info *fi) { return fi->frame; } /* The number of arguments being passed in the frame. */ static int arm_frame_num_args (struct frame_info *fi) { /* We have no way of knowing. */ return -1; } /* A typical Thumb prologue looks like this: push {r7, lr} add sp, sp, #-28 add r7, sp, #12 Sometimes the latter instruction may be replaced by: mov r7, sp or like this: push {r7, lr} mov r7, sp sub sp, #12 or, on tpcs, like this: sub sp,#16 push {r7, lr} (many instructions) mov r7, sp sub sp, #12 There is always one instruction of three classes: 1 - push 2 - setting of r7 3 - adjusting of sp When we have found at least one of each class we are done with the prolog. Note that the "sub sp, #NN" before the push does not count. */ static CORE_ADDR thumb_skip_prologue (CORE_ADDR pc, CORE_ADDR func_end) { CORE_ADDR current_pc; /* findmask: bit 0 - push { rlist } bit 1 - mov r7, sp OR add r7, sp, #imm (setting of r7) bit 2 - sub sp, #simm OR add sp, #simm (adjusting of sp) */ int findmask = 0; for (current_pc = pc; current_pc + 2 < func_end && current_pc < pc + 40; current_pc += 2) { unsigned short insn = read_memory_unsigned_integer (current_pc, 2); if ((insn & 0xfe00) == 0xb400) /* push { rlist } */ { findmask |= 1; /* push found */ } else if ((insn & 0xff00) == 0xb000) /* add sp, #simm OR sub sp, #simm */ { if ((findmask & 1) == 0) /* before push ? */ continue; else findmask |= 4; /* add/sub sp found */ } else if ((insn & 0xff00) == 0xaf00) /* add r7, sp, #imm */ { findmask |= 2; /* setting of r7 found */ } else if (insn == 0x466f) /* mov r7, sp */ { findmask |= 2; /* setting of r7 found */ } else if (findmask == (4+2+1)) { /* We have found one of each type of prologue instruction */ break; } else /* Something in the prolog that we don't care about or some instruction from outside the prolog scheduled here for optimization. */ continue; } return current_pc; } /* Advance the PC across any function entry prologue instructions to reach some "real" code. The APCS (ARM Procedure Call Standard) defines the following prologue: mov ip, sp [stmfd sp!, {a1,a2,a3,a4}] stmfd sp!, {...,fp,ip,lr,pc} [stfe f7, [sp, #-12]!] [stfe f6, [sp, #-12]!] [stfe f5, [sp, #-12]!] [stfe f4, [sp, #-12]!] sub fp, ip, #nn @@ nn == 20 or 4 depending on second insn */ static CORE_ADDR arm_skip_prologue (CORE_ADDR pc) { unsigned long inst; CORE_ADDR skip_pc; CORE_ADDR func_addr, func_end = 0; char *func_name; struct symtab_and_line sal; /* If we're in a dummy frame, don't even try to skip the prologue. */ if (USE_GENERIC_DUMMY_FRAMES && PC_IN_CALL_DUMMY (pc, 0, 0)) return pc; /* See what the symbol table says. */ if (find_pc_partial_function (pc, &func_name, &func_addr, &func_end)) { struct symbol *sym; /* Found a function. */ sym = lookup_symbol (func_name, NULL, VAR_NAMESPACE, NULL, NULL); if (sym && SYMBOL_LANGUAGE (sym) != language_asm) { /* Don't use this trick for assembly source files. */ sal = find_pc_line (func_addr, 0); if ((sal.line != 0) && (sal.end < func_end)) return sal.end; } } /* Check if this is Thumb code. */ if (arm_pc_is_thumb (pc)) return thumb_skip_prologue (pc, func_end); /* Can't find the prologue end in the symbol table, try it the hard way by disassembling the instructions. */ /* Like arm_scan_prologue, stop no later than pc + 64. */ if (func_end == 0 || func_end > pc + 64) func_end = pc + 64; for (skip_pc = pc; skip_pc < func_end; skip_pc += 4) { inst = read_memory_integer (skip_pc, 4); /* "mov ip, sp" is no longer a required part of the prologue. */ if (inst == 0xe1a0c00d) /* mov ip, sp */ continue; /* Some prologues begin with "str lr, [sp, #-4]!". */ if (inst == 0xe52de004) /* str lr, [sp, #-4]! */ continue; if ((inst & 0xfffffff0) == 0xe92d0000) /* stmfd sp!,{a1,a2,a3,a4} */ continue; if ((inst & 0xfffff800) == 0xe92dd800) /* stmfd sp!,{fp,ip,lr,pc} */ continue; /* Any insns after this point may float into the code, if it makes for better instruction scheduling, so we skip them only if we find them, but still consider the function to be frame-ful. */ /* We may have either one sfmfd instruction here, or several stfe insns, depending on the version of floating point code we support. */ if ((inst & 0xffbf0fff) == 0xec2d0200) /* sfmfd fn, <cnt>, [sp]! */ continue; if ((inst & 0xffff8fff) == 0xed6d0103) /* stfe fn, [sp, #-12]! */ continue; if ((inst & 0xfffff000) == 0xe24cb000) /* sub fp, ip, #nn */ continue; if ((inst & 0xfffff000) == 0xe24dd000) /* sub sp, sp, #nn */ continue; if ((inst & 0xffffc000) == 0xe54b0000 || /* strb r(0123),[r11,#-nn] */ (inst & 0xffffc0f0) == 0xe14b00b0 || /* strh r(0123),[r11,#-nn] */ (inst & 0xffffc000) == 0xe50b0000) /* str r(0123),[r11,#-nn] */ continue; if ((inst & 0xffffc000) == 0xe5cd0000 || /* strb r(0123),[sp,#nn] */ (inst & 0xffffc0f0) == 0xe1cd00b0 || /* strh r(0123),[sp,#nn] */ (inst & 0xffffc000) == 0xe58d0000) /* str r(0123),[sp,#nn] */ continue; /* Un-recognized instruction; stop scanning. */ break; } return skip_pc; /* End of prologue */ } /* *INDENT-OFF* */ /* Function: thumb_scan_prologue (helper function for arm_scan_prologue) This function decodes a Thumb function prologue to determine: 1) the size of the stack frame 2) which registers are saved on it 3) the offsets of saved regs 4) the offset from the stack pointer to the frame pointer This information is stored in the "extra" fields of the frame_info. A typical Thumb function prologue would create this stack frame (offsets relative to FP) old SP -> 24 stack parameters 20 LR 16 R7 R7 -> 0 local variables (16 bytes) SP -> -12 additional stack space (12 bytes) The frame size would thus be 36 bytes, and the frame offset would be 12 bytes. The frame register is R7. The comments for thumb_skip_prolog() describe the algorithm we use to detect the end of the prolog. */ /* *INDENT-ON* */ static void thumb_scan_prologue (struct frame_info *fi) { CORE_ADDR prologue_start; CORE_ADDR prologue_end; CORE_ADDR current_pc; /* Which register has been copied to register n? */ int saved_reg[16]; /* findmask: bit 0 - push { rlist } bit 1 - mov r7, sp OR add r7, sp, #imm (setting of r7) bit 2 - sub sp, #simm OR add sp, #simm (adjusting of sp) */ int findmask = 0; int i; /* Don't try to scan dummy frames. */ if (USE_GENERIC_DUMMY_FRAMES && fi != NULL && PC_IN_CALL_DUMMY (fi->pc, 0, 0)) return; if (find_pc_partial_function (fi->pc, NULL, &prologue_start, &prologue_end)) { struct symtab_and_line sal = find_pc_line (prologue_start, 0); if (sal.line == 0) /* no line info, use current PC */ prologue_end = fi->pc; else if (sal.end < prologue_end) /* next line begins after fn end */ prologue_end = sal.end; /* (probably means no prologue) */ } else /* We're in the boondocks: allow for 16 pushes, an add, and "mv fp,sp". */ prologue_end = prologue_start + 40; prologue_end = min (prologue_end, fi->pc); /* Initialize the saved register map. When register H is copied to register L, we will put H in saved_reg[L]. */ for (i = 0; i < 16; i++) saved_reg[i] = i; /* Search the prologue looking for instructions that set up the frame pointer, adjust the stack pointer, and save registers. Do this until all basic prolog instructions are found. */ fi->extra_info->framesize = 0; for (current_pc = prologue_start; (current_pc < prologue_end) && ((findmask & 7) != 7); current_pc += 2) { unsigned short insn; int regno; int offset; insn = read_memory_unsigned_integer (current_pc, 2); if ((insn & 0xfe00) == 0xb400) /* push { rlist } */ { int mask; findmask |= 1; /* push found */ /* Bits 0-7 contain a mask for registers R0-R7. Bit 8 says whether to save LR (R14). */ mask = (insn & 0xff) | ((insn & 0x100) << 6); /* Calculate offsets of saved R0-R7 and LR. */ for (regno = ARM_LR_REGNUM; regno >= 0; regno--) if (mask & (1 << regno)) { fi->extra_info->framesize += 4; fi->saved_regs[saved_reg[regno]] = -(fi->extra_info->framesize); /* Reset saved register map. */ saved_reg[regno] = regno; } } else if ((insn & 0xff00) == 0xb000) /* add sp, #simm OR sub sp, #simm */ { if ((findmask & 1) == 0) /* before push? */ continue; else findmask |= 4; /* add/sub sp found */ offset = (insn & 0x7f) << 2; /* get scaled offset */ if (insn & 0x80) /* is it signed? (==subtracting) */ { fi->extra_info->frameoffset += offset; offset = -offset; } fi->extra_info->framesize -= offset; } else if ((insn & 0xff00) == 0xaf00) /* add r7, sp, #imm */ { findmask |= 2; /* setting of r7 found */ fi->extra_info->framereg = THUMB_FP_REGNUM; /* get scaled offset */ fi->extra_info->frameoffset = (insn & 0xff) << 2; } else if (insn == 0x466f) /* mov r7, sp */ { findmask |= 2; /* setting of r7 found */ fi->extra_info->framereg = THUMB_FP_REGNUM; fi->extra_info->frameoffset = 0; saved_reg[THUMB_FP_REGNUM] = ARM_SP_REGNUM; } else if ((insn & 0xffc0) == 0x4640) /* mov r0-r7, r8-r15 */ { int lo_reg = insn & 7; /* dest. register (r0-r7) */ int hi_reg = ((insn >> 3) & 7) + 8; /* source register (r8-15) */ saved_reg[lo_reg] = hi_reg; /* remember hi reg was saved */ } else /* Something in the prolog that we don't care about or some instruction from outside the prolog scheduled here for optimization. */ continue; } } /* Check if prologue for this frame's PC has already been scanned. If it has, copy the relevant information about that prologue and return non-zero. Otherwise do not copy anything and return zero. The information saved in the cache includes: * the frame register number; * the size of the stack frame; * the offsets of saved regs (relative to the old SP); and * the offset from the stack pointer to the frame pointer The cache contains only one entry, since this is adequate for the typical sequence of prologue scan requests we get. When performing a backtrace, GDB will usually ask to scan the same function twice in a row (once to get the frame chain, and once to fill in the extra frame information). */ static struct frame_info prologue_cache; static int check_prologue_cache (struct frame_info *fi) { int i; if (fi->pc == prologue_cache.pc) { fi->extra_info->framereg = prologue_cache.extra_info->framereg; fi->extra_info->framesize = prologue_cache.extra_info->framesize; fi->extra_info->frameoffset = prologue_cache.extra_info->frameoffset; for (i = 0; i < NUM_REGS + NUM_PSEUDO_REGS; i++) fi->saved_regs[i] = prologue_cache.saved_regs[i]; return 1; } else return 0; } /* Copy the prologue information from fi to the prologue cache. */ static void save_prologue_cache (struct frame_info *fi) { int i; prologue_cache.pc = fi->pc; prologue_cache.extra_info->framereg = fi->extra_info->framereg; prologue_cache.extra_info->framesize = fi->extra_info->framesize; prologue_cache.extra_info->frameoffset = fi->extra_info->frameoffset; for (i = 0; i < NUM_REGS + NUM_PSEUDO_REGS; i++) prologue_cache.saved_regs[i] = fi->saved_regs[i]; } /* This function decodes an ARM function prologue to determine: 1) the size of the stack frame 2) which registers are saved on it 3) the offsets of saved regs 4) the offset from the stack pointer to the frame pointer This information is stored in the "extra" fields of the frame_info. There are two basic forms for the ARM prologue. The fixed argument function call will look like: mov ip, sp stmfd sp!, {fp, ip, lr, pc} sub fp, ip, #4 [sub sp, sp, #4] Which would create this stack frame (offsets relative to FP): IP -> 4 (caller's stack) FP -> 0 PC (points to address of stmfd instruction + 8 in callee) -4 LR (return address in caller) -8 IP (copy of caller's SP) -12 FP (caller's FP) SP -> -28 Local variables The frame size would thus be 32 bytes, and the frame offset would be 28 bytes. The stmfd call can also save any of the vN registers it plans to use, which increases the frame size accordingly. Note: The stored PC is 8 off of the STMFD instruction that stored it because the ARM Store instructions always store PC + 8 when you read the PC register. A variable argument function call will look like: mov ip, sp stmfd sp!, {a1, a2, a3, a4} stmfd sp!, {fp, ip, lr, pc} sub fp, ip, #20 Which would create this stack frame (offsets relative to FP): IP -> 20 (caller's stack) 16 A4 12 A3 8 A2 4 A1 FP -> 0 PC (points to address of stmfd instruction + 8 in callee) -4 LR (return address in caller) -8 IP (copy of caller's SP) -12 FP (caller's FP) SP -> -28 Local variables The frame size would thus be 48 bytes, and the frame offset would be 28 bytes. There is another potential complication, which is that the optimizer will try to separate the store of fp in the "stmfd" instruction from the "sub fp, ip, #NN" instruction. Almost anything can be there, so we just key on the stmfd, and then scan for the "sub fp, ip, #NN"... Also, note, the original version of the ARM toolchain claimed that there should be an instruction at the end of the prologue. I have never seen GCC produce this, and the ARM docs don't mention it. We still test for it below in case it happens... */ static void arm_scan_prologue (struct frame_info *fi) { int regno, sp_offset, fp_offset; LONGEST return_value; CORE_ADDR prologue_start, prologue_end, current_pc; /* Check if this function is already in the cache of frame information. */ if (check_prologue_cache (fi)) return; /* Assume there is no frame until proven otherwise. */ fi->extra_info->framereg = ARM_SP_REGNUM; fi->extra_info->framesize = 0; fi->extra_info->frameoffset = 0; /* Check for Thumb prologue. */ if (arm_pc_is_thumb (fi->pc)) { thumb_scan_prologue (fi); save_prologue_cache (fi); return; } /* Find the function prologue. If we can't find the function in the symbol table, peek in the stack frame to find the PC. */ if (find_pc_partial_function (fi->pc, NULL, &prologue_start, &prologue_end)) { /* One way to find the end of the prologue (which works well for unoptimized code) is to do the following: struct symtab_and_line sal = find_pc_line (prologue_start, 0); if (sal.line == 0) prologue_end = fi->pc; else if (sal.end < prologue_end) prologue_end = sal.end; This mechanism is very accurate so long as the optimizer doesn't move any instructions from the function body into the prologue. If this happens, sal.end will be the last instruction in the first hunk of prologue code just before the first instruction that the scheduler has moved from the body to the prologue. In order to make sure that we scan all of the prologue instructions, we use a slightly less accurate mechanism which may scan more than necessary. To help compensate for this lack of accuracy, the prologue scanning loop below contains several clauses which'll cause the loop to terminate early if an implausible prologue instruction is encountered. The expression prologue_start + 64 is a suitable endpoint since it accounts for the largest possible prologue plus up to five instructions inserted by the scheduler. */ if (prologue_end > prologue_start + 64) { prologue_end = prologue_start + 64; /* See above. */ } } else { /* Get address of the stmfd in the prologue of the callee; the saved PC is the address of the stmfd + 8. */ if (!safe_read_memory_integer (fi->frame, 4, &return_value)) return; else { prologue_start = ADDR_BITS_REMOVE (return_value) - 8; prologue_end = prologue_start + 64; /* See above. */ } } /* Now search the prologue looking for instructions that set up the frame pointer, adjust the stack pointer, and save registers. Be careful, however, and if it doesn't look like a prologue, don't try to scan it. If, for instance, a frameless function begins with stmfd sp!, then we will tell ourselves there is a frame, which will confuse stack traceback, as well as "finish" and other operations that rely on a knowledge of the stack traceback. In the APCS, the prologue should start with "mov ip, sp" so if we don't see this as the first insn, we will stop. [Note: This doesn't seem to be true any longer, so it's now an optional part of the prologue. - Kevin Buettner, 2001-11-20] [Note further: The "mov ip,sp" only seems to be missing in frameless functions at optimization level "-O2" or above, in which case it is often (but not always) replaced by "str lr, [sp, #-4]!". - Michael Snyder, 2002-04-23] */ sp_offset = fp_offset = 0; for (current_pc = prologue_start; current_pc < prologue_end; current_pc += 4) { unsigned int insn = read_memory_unsigned_integer (current_pc, 4); if (insn == 0xe1a0c00d) /* mov ip, sp */ { continue; } else if (insn == 0xe52de004) /* str lr, [sp, #-4]! */ { /* Function is frameless: extra_info defaults OK? */ continue; } else if ((insn & 0xffff0000) == 0xe92d0000) /* stmfd sp!, {..., fp, ip, lr, pc} or stmfd sp!, {a1, a2, a3, a4} */ { int mask = insn & 0xffff; /* Calculate offsets of saved registers. */ for (regno = ARM_PC_REGNUM; regno >= 0; regno--) if (mask & (1 << regno)) { sp_offset -= 4; fi->saved_regs[regno] = sp_offset; } } else if ((insn & 0xffffc000) == 0xe54b0000 || /* strb rx,[r11,#-n] */ (insn & 0xffffc0f0) == 0xe14b00b0 || /* strh rx,[r11,#-n] */ (insn & 0xffffc000) == 0xe50b0000) /* str rx,[r11,#-n] */ { /* No need to add this to saved_regs -- it's just an arg reg. */ continue; } else if ((insn & 0xffffc000) == 0xe5cd0000 || /* strb rx,[sp,#n] */ (insn & 0xffffc0f0) == 0xe1cd00b0 || /* strh rx,[sp,#n] */ (insn & 0xffffc000) == 0xe58d0000) /* str rx,[sp,#n] */ { /* No need to add this to saved_regs -- it's just an arg reg. */ continue; } else if ((insn & 0xfffff000) == 0xe24cb000) /* sub fp, ip #n */ { unsigned imm = insn & 0xff; /* immediate value */ unsigned rot = (insn & 0xf00) >> 7; /* rotate amount */ imm = (imm >> rot) | (imm << (32 - rot)); fp_offset = -imm; fi->extra_info->framereg = ARM_FP_REGNUM; } else if ((insn & 0xfffff000) == 0xe24dd000) /* sub sp, sp #n */ { unsigned imm = insn & 0xff; /* immediate value */ unsigned rot = (insn & 0xf00) >> 7; /* rotate amount */ imm = (imm >> rot) | (imm << (32 - rot)); sp_offset -= imm; } else if ((insn & 0xffff7fff) == 0xed6d0103) /* stfe f?, [sp, -#c]! */ { sp_offset -= 12; regno = ARM_F0_REGNUM + ((insn >> 12) & 0x07); fi->saved_regs[regno] = sp_offset; } else if ((insn & 0xffbf0fff) == 0xec2d0200) /* sfmfd f0, 4, [sp!] */ { int n_saved_fp_regs; unsigned int fp_start_reg, fp_bound_reg; if ((insn & 0x800) == 0x800) /* N0 is set */ { if ((insn & 0x40000) == 0x40000) /* N1 is set */ n_saved_fp_regs = 3; else n_saved_fp_regs = 1; } else { if ((insn & 0x40000) == 0x40000) /* N1 is set */ n_saved_fp_regs = 2; else n_saved_fp_regs = 4; } fp_start_reg = ARM_F0_REGNUM + ((insn >> 12) & 0x7); fp_bound_reg = fp_start_reg + n_saved_fp_regs; for (; fp_start_reg < fp_bound_reg; fp_start_reg++) { sp_offset -= 12; fi->saved_regs[fp_start_reg++] = sp_offset; } } else if ((insn & 0xf0000000) != 0xe0000000) break; /* Condition not true, exit early */ else if ((insn & 0xfe200000) == 0xe8200000) /* ldm? */ break; /* Don't scan past a block load */ else /* The optimizer might shove anything into the prologue, so we just skip what we don't recognize. */ continue; } /* The frame size is just the negative of the offset (from the original SP) of the last thing thing we pushed on the stack. The frame offset is [new FP] - [new SP]. */ fi->extra_info->framesize = -sp_offset; if (fi->extra_info->framereg == ARM_FP_REGNUM) fi->extra_info->frameoffset = fp_offset - sp_offset; else fi->extra_info->frameoffset = 0; save_prologue_cache (fi); } /* Find REGNUM on the stack. Otherwise, it's in an active register. One thing we might want to do here is to check REGNUM against the clobber mask, and somehow flag it as invalid if it isn't saved on the stack somewhere. This would provide a graceful failure mode when trying to get the value of caller-saves registers for an inner frame. */ static CORE_ADDR arm_find_callers_reg (struct frame_info *fi, int regnum) { /* NOTE: cagney/2002-05-03: This function really shouldn't be needed. Instead the (still being written) register unwind function could be called directly. */ for (; fi; fi = fi->next) { if (USE_GENERIC_DUMMY_FRAMES && PC_IN_CALL_DUMMY (fi->pc, 0, 0)) { return generic_read_register_dummy (fi->pc, fi->frame, regnum); } else if (fi->saved_regs[regnum] != 0) { /* NOTE: cagney/2002-05-03: This would normally need to handle ARM_SP_REGNUM as a special case as, according to the frame.h comments, saved_regs[SP_REGNUM] contains the SP value not its address. It appears that the ARM isn't doing this though. */ return read_memory_integer (fi->saved_regs[regnum], REGISTER_RAW_SIZE (regnum)); } } return read_register (regnum); } /* Function: frame_chain Given a GDB frame, determine the address of the calling function's frame. This will be used to create a new GDB frame struct, and then INIT_EXTRA_FRAME_INFO and INIT_FRAME_PC will be called for the new frame. For ARM, we save the frame size when we initialize the frame_info. */ static CORE_ADDR arm_frame_chain (struct frame_info *fi) { CORE_ADDR caller_pc; int framereg = fi->extra_info->framereg; if (USE_GENERIC_DUMMY_FRAMES && PC_IN_CALL_DUMMY (fi->pc, 0, 0)) /* A generic call dummy's frame is the same as caller's. */ return fi->frame; if (fi->pc < LOWEST_PC) return 0; /* If the caller is the startup code, we're at the end of the chain. */ caller_pc = FRAME_SAVED_PC (fi); /* If the caller is Thumb and the caller is ARM, or vice versa, the frame register of the caller is different from ours. So we must scan the prologue of the caller to determine its frame register number. */ /* XXX Fixme, we should try to do this without creating a temporary caller_fi. */ if (arm_pc_is_thumb (caller_pc) != arm_pc_is_thumb (fi->pc)) { struct frame_info caller_fi; struct cleanup *old_chain; /* Create a temporary frame suitable for scanning the caller's prologue. (Ugh.) */ memset (&caller_fi, 0, sizeof (caller_fi)); caller_fi.extra_info = (struct frame_extra_info *) xcalloc (1, sizeof (struct frame_extra_info)); old_chain = make_cleanup (xfree, caller_fi.extra_info); caller_fi.saved_regs = (CORE_ADDR *) xcalloc (1, SIZEOF_FRAME_SAVED_REGS); make_cleanup (xfree, caller_fi.saved_regs); /* Now, scan the prologue and obtain the frame register. */ caller_fi.pc = caller_pc; arm_scan_prologue (&caller_fi); framereg = caller_fi.extra_info->framereg; /* Deallocate the storage associated with the temporary frame created above. */ do_cleanups (old_chain); } /* If the caller used a frame register, return its value. Otherwise, return the caller's stack pointer. */ if (framereg == ARM_FP_REGNUM || framereg == THUMB_FP_REGNUM) return arm_find_callers_reg (fi, framereg); else return fi->frame + fi->extra_info->framesize; } /* This function actually figures out the frame address for a given pc and sp. This is tricky because we sometimes don't use an explicit frame pointer, and the previous stack pointer isn't necessarily recorded on the stack. The only reliable way to get this info is to examine the prologue. FROMLEAF is a little confusing, it means this is the next frame up the chain AFTER a frameless function. If this is true, then the frame value for this frame is still in the fp register. */ static void arm_init_extra_frame_info (int fromleaf, struct frame_info *fi) { int reg; CORE_ADDR sp; if (fi->saved_regs == NULL) frame_saved_regs_zalloc (fi); fi->extra_info = (struct frame_extra_info *) frame_obstack_alloc (sizeof (struct frame_extra_info)); fi->extra_info->framesize = 0; fi->extra_info->frameoffset = 0; fi->extra_info->framereg = 0; if (fi->next) fi->pc = FRAME_SAVED_PC (fi->next); memset (fi->saved_regs, '\000', sizeof fi->saved_regs); /* Compute stack pointer for this frame. We use this value for both the sigtramp and call dummy cases. */ if (!fi->next) sp = read_sp(); else if (USE_GENERIC_DUMMY_FRAMES && PC_IN_CALL_DUMMY (fi->next->pc, 0, 0)) /* For generic dummy frames, pull the value direct from the frame. Having an unwind function to do this would be nice. */ sp = generic_read_register_dummy (fi->next->pc, fi->next->frame, ARM_SP_REGNUM); else sp = (fi->next->frame - fi->next->extra_info->frameoffset + fi->next->extra_info->framesize); /* Determine whether or not we're in a sigtramp frame. Unfortunately, it isn't sufficient to test fi->signal_handler_caller because this value is sometimes set after invoking INIT_EXTRA_FRAME_INFO. So we test *both* fi->signal_handler_caller and PC_IN_SIGTRAMP to determine if we need to use the sigcontext addresses for the saved registers. Note: If an ARM PC_IN_SIGTRAMP method ever needs to compare against the name of the function, the code below will have to be changed to first fetch the name of the function and then pass this name to PC_IN_SIGTRAMP. */ if (SIGCONTEXT_REGISTER_ADDRESS_P () && (fi->signal_handler_caller || PC_IN_SIGTRAMP (fi->pc, (char *)0))) { for (reg = 0; reg < NUM_REGS; reg++) fi->saved_regs[reg] = SIGCONTEXT_REGISTER_ADDRESS (sp, fi->pc, reg); /* FIXME: What about thumb mode? */ fi->extra_info->framereg = ARM_SP_REGNUM; fi->frame = read_memory_integer (fi->saved_regs[fi->extra_info->framereg], REGISTER_RAW_SIZE (fi->extra_info->framereg)); fi->extra_info->framesize = 0; fi->extra_info->frameoffset = 0; } else if (PC_IN_CALL_DUMMY (fi->pc, sp, fi->frame)) { CORE_ADDR rp; CORE_ADDR callers_sp; /* Set rp point at the high end of the saved registers. */ rp = fi->frame - REGISTER_SIZE; /* Fill in addresses of saved registers. */ fi->saved_regs[ARM_PS_REGNUM] = rp; rp -= REGISTER_RAW_SIZE (ARM_PS_REGNUM); for (reg = ARM_PC_REGNUM; reg >= 0; reg--) { fi->saved_regs[reg] = rp; rp -= REGISTER_RAW_SIZE (reg); } callers_sp = read_memory_integer (fi->saved_regs[ARM_SP_REGNUM], REGISTER_RAW_SIZE (ARM_SP_REGNUM)); fi->extra_info->framereg = ARM_FP_REGNUM; fi->extra_info->framesize = callers_sp - sp; fi->extra_info->frameoffset = fi->frame - sp; } else { arm_scan_prologue (fi); if (!fi->next) /* This is the innermost frame? */ fi->frame = read_register (fi->extra_info->framereg); else if (USE_GENERIC_DUMMY_FRAMES && PC_IN_CALL_DUMMY (fi->next->pc, 0, 0)) /* Next inner most frame is a dummy, just grab its frame. Dummy frames always have the same FP as their caller. */ fi->frame = fi->next->frame; else if (fi->extra_info->framereg == ARM_FP_REGNUM || fi->extra_info->framereg == THUMB_FP_REGNUM) { /* not the innermost frame */ /* If we have an FP, the callee saved it. */ if (fi->next->saved_regs[fi->extra_info->framereg] != 0) fi->frame = read_memory_integer (fi->next ->saved_regs[fi->extra_info->framereg], 4); else if (fromleaf) /* If we were called by a frameless fn. then our frame is still in the frame pointer register on the board... */ fi->frame = read_fp (); } /* Calculate actual addresses of saved registers using offsets determined by arm_scan_prologue. */ for (reg = 0; reg < NUM_REGS; reg++) if (fi->saved_regs[reg] != 0) fi->saved_regs[reg] += (fi->frame + fi->extra_info->framesize - fi->extra_info->frameoffset); } } /* Find the caller of this frame. We do this by seeing if ARM_LR_REGNUM is saved in the stack anywhere, otherwise we get it from the registers. The old definition of this function was a macro: #define FRAME_SAVED_PC(FRAME) \ ADDR_BITS_REMOVE (read_memory_integer ((FRAME)->frame - 4, 4)) */ static CORE_ADDR arm_frame_saved_pc (struct frame_info *fi) { /* If a dummy frame, pull the PC out of the frame's register buffer. */ if (USE_GENERIC_DUMMY_FRAMES && PC_IN_CALL_DUMMY (fi->pc, 0, 0)) return generic_read_register_dummy (fi->pc, fi->frame, ARM_PC_REGNUM); if (PC_IN_CALL_DUMMY (fi->pc, fi->frame - fi->extra_info->frameoffset, fi->frame)) { return read_memory_integer (fi->saved_regs[ARM_PC_REGNUM], REGISTER_RAW_SIZE (ARM_PC_REGNUM)); } else { CORE_ADDR pc = arm_find_callers_reg (fi, ARM_LR_REGNUM); return IS_THUMB_ADDR (pc) ? UNMAKE_THUMB_ADDR (pc) : pc; } } /* Return the frame address. On ARM, it is R11; on Thumb it is R7. Examine the Program Status Register to decide which state we're in. */ static CORE_ADDR arm_read_fp (void) { if (read_register (ARM_PS_REGNUM) & 0x20) /* Bit 5 is Thumb state bit */ return read_register (THUMB_FP_REGNUM); /* R7 if Thumb */ else return read_register (ARM_FP_REGNUM); /* R11 if ARM */ } /* Store into a struct frame_saved_regs the addresses of the saved registers of frame described by FRAME_INFO. This includes special registers such as PC and FP saved in special ways in the stack frame. SP is even more special: the address we return for it IS the sp for the next frame. */ static void arm_frame_init_saved_regs (struct frame_info *fip) { if (fip->saved_regs) return; arm_init_extra_frame_info (0, fip); } /* Set the return address for a generic dummy frame. ARM uses the entry point. */ static CORE_ADDR arm_push_return_address (CORE_ADDR pc, CORE_ADDR sp) { write_register (ARM_LR_REGNUM, CALL_DUMMY_ADDRESS ()); return sp; } /* Push an empty stack frame, to record the current PC, etc. */ static void arm_push_dummy_frame (void) { CORE_ADDR old_sp = read_register (ARM_SP_REGNUM); CORE_ADDR sp = old_sp; CORE_ADDR fp, prologue_start; int regnum; /* Push the two dummy prologue instructions in reverse order, so that they'll be in the correct low-to-high order in memory. */ /* sub fp, ip, #4 */ sp = push_word (sp, 0xe24cb004); /* stmdb sp!, {r0-r10, fp, ip, lr, pc} */ prologue_start = sp = push_word (sp, 0xe92ddfff); /* Push a pointer to the dummy prologue + 12, because when stm instruction stores the PC, it stores the address of the stm instruction itself plus 12. */ fp = sp = push_word (sp, prologue_start + 12); /* Push the processor status. */ sp = push_word (sp, read_register (ARM_PS_REGNUM)); /* Push all 16 registers starting with r15. */ for (regnum = ARM_PC_REGNUM; regnum >= 0; regnum--) sp = push_word (sp, read_register (regnum)); /* Update fp (for both Thumb and ARM) and sp. */ write_register (ARM_FP_REGNUM, fp); write_register (THUMB_FP_REGNUM, fp); write_register (ARM_SP_REGNUM, sp); } /* CALL_DUMMY_WORDS: This sequence of words is the instructions mov lr,pc mov pc,r4 illegal Note this is 12 bytes. */ static LONGEST arm_call_dummy_words[] = { 0xe1a0e00f, 0xe1a0f004, 0xe7ffdefe }; /* Adjust the call_dummy_breakpoint_offset for the bp_call_dummy breakpoint to the proper address in the call dummy, so that `finish' after a stop in a call dummy works. FIXME rearnsha 2002-02018: Tweeking current_gdbarch is not an optimal solution, but the call to arm_fix_call_dummy is immediately followed by a call to run_stack_dummy, which is the only function where call_dummy_breakpoint_offset is actually used. */ static void arm_set_call_dummy_breakpoint_offset (void) { if (caller_is_thumb) set_gdbarch_call_dummy_breakpoint_offset (current_gdbarch, 4); else set_gdbarch_call_dummy_breakpoint_offset (current_gdbarch, 8); } /* Fix up the call dummy, based on whether the processor is currently in Thumb or ARM mode, and whether the target function is Thumb or ARM. There are three different situations requiring three different dummies: * ARM calling ARM: uses the call dummy in tm-arm.h, which has already been copied into the dummy parameter to this function. * ARM calling Thumb: uses the call dummy in tm-arm.h, but with the "mov pc,r4" instruction patched to be a "bx r4" instead. * Thumb calling anything: uses the Thumb dummy defined below, which works for calling both ARM and Thumb functions. All three call dummies expect to receive the target function address in R4, with the low bit set if it's a Thumb function. */ static void arm_fix_call_dummy (char *dummy, CORE_ADDR pc, CORE_ADDR fun, int nargs, struct value **args, struct type *type, int gcc_p) { static short thumb_dummy[4] = { 0xf000, 0xf801, /* bl label */ 0xdf18, /* swi 24 */ 0x4720, /* label: bx r4 */ }; static unsigned long arm_bx_r4 = 0xe12fff14; /* bx r4 instruction */ /* Set flag indicating whether the current PC is in a Thumb function. */ caller_is_thumb = arm_pc_is_thumb (read_pc ()); arm_set_call_dummy_breakpoint_offset (); /* If the target function is Thumb, set the low bit of the function address. And if the CPU is currently in ARM mode, patch the second instruction of call dummy to use a BX instruction to switch to Thumb mode. */ target_is_thumb = arm_pc_is_thumb (fun); if (target_is_thumb) { fun |= 1; if (!caller_is_thumb) store_unsigned_integer (dummy + 4, sizeof (arm_bx_r4), arm_bx_r4); } /* If the CPU is currently in Thumb mode, use the Thumb call dummy instead of the ARM one that's already been copied. This will work for both Thumb and ARM target functions. */ if (caller_is_thumb) { int i; char *p = dummy; int len = sizeof (thumb_dummy) / sizeof (thumb_dummy[0]); for (i = 0; i < len; i++) { store_unsigned_integer (p, sizeof (thumb_dummy[0]), thumb_dummy[i]); p += sizeof (thumb_dummy[0]); } } /* Put the target address in r4; the call dummy will copy this to the PC. */ write_register (4, fun); } /* Note: ScottB This function does not support passing parameters using the FPA variant of the APCS. It passes any floating point arguments in the general registers and/or on the stack. */ static CORE_ADDR arm_push_arguments (int nargs, struct value **args, CORE_ADDR sp, int struct_return, CORE_ADDR struct_addr) { CORE_ADDR fp; int argnum; int argreg; int nstack; int simd_argreg; int second_pass; struct gdbarch_tdep *tdep = gdbarch_tdep (current_gdbarch); /* Walk through the list of args and determine how large a temporary stack is required. Need to take care here as structs may be passed on the stack, and we have to to push them. On the second pass, do the store. */ nstack = 0; fp = sp; for (second_pass = 0; second_pass < 2; second_pass++) { /* Compute the FP using the information computed during the first pass. */ if (second_pass) fp = sp - nstack; simd_argreg = 0; argreg = ARM_A1_REGNUM; nstack = 0; /* The struct_return pointer occupies the first parameter passing register. */ if (struct_return) { if (second_pass) { if (arm_debug) fprintf_unfiltered (gdb_stdlog, "struct return in %s = 0x%s\n", REGISTER_NAME (argreg), paddr (struct_addr)); write_register (argreg, struct_addr); } argreg++; } for (argnum = 0; argnum < nargs; argnum++) { int len; struct type *arg_type; struct type *target_type; enum type_code typecode; char *val; arg_type = check_typedef (VALUE_TYPE (args[argnum])); len = TYPE_LENGTH (arg_type); target_type = TYPE_TARGET_TYPE (arg_type); typecode = TYPE_CODE (arg_type); val = VALUE_CONTENTS (args[argnum]); /* If the argument is a pointer to a function, and it is a Thumb function, create a LOCAL copy of the value and set the THUMB bit in it. */ if (second_pass && TYPE_CODE_PTR == typecode && target_type != NULL && TYPE_CODE_FUNC == TYPE_CODE (target_type)) { CORE_ADDR regval = extract_address (val, len); if (arm_pc_is_thumb (regval)) { val = alloca (len); store_address (val, len, MAKE_THUMB_ADDR (regval)); } } /* Copy the argument to general registers or the stack in register-sized pieces. Large arguments are split between registers and stack. */ while (len > 0) { int partial_len = len < REGISTER_SIZE ? len : REGISTER_SIZE; if (argreg <= ARM_LAST_ARG_REGNUM) { /* The argument is being passed in a general purpose register. */ if (second_pass) { CORE_ADDR regval = extract_address (val, partial_len); if (arm_debug) fprintf_unfiltered (gdb_stdlog, "arg %d in %s = 0x%s\n", argnum, REGISTER_NAME (argreg), phex (regval, REGISTER_SIZE)); write_register (argreg, regval); } argreg++; } else { if (second_pass) { /* Push the arguments onto the stack. */ if (arm_debug) fprintf_unfiltered (gdb_stdlog, "arg %d @ 0x%s + %d\n", argnum, paddr (fp), nstack); write_memory (fp + nstack, val, REGISTER_SIZE); } nstack += REGISTER_SIZE; } len -= partial_len; val += partial_len; } } } /* Return the botom of the argument list (pointed to by fp). */ return fp; } /* Pop the current frame. So long as the frame info has been initialized properly (see arm_init_extra_frame_info), this code works for dummy frames as well as regular frames. I.e, there's no need to have a special case for dummy frames. */ static void arm_pop_frame (void) { int regnum; struct frame_info *frame = get_current_frame (); CORE_ADDR old_SP = (frame->frame - frame->extra_info->frameoffset + frame->extra_info->framesize); if (USE_GENERIC_DUMMY_FRAMES && PC_IN_CALL_DUMMY (frame->pc, frame->frame, frame->frame)) { generic_pop_dummy_frame (); flush_cached_frames (); return; } for (regnum = 0; regnum < NUM_REGS; regnum++) if (frame->saved_regs[regnum] != 0) write_register (regnum, read_memory_integer (frame->saved_regs[regnum], REGISTER_RAW_SIZE (regnum))); write_register (ARM_PC_REGNUM, FRAME_SAVED_PC (frame)); write_register (ARM_SP_REGNUM, old_SP); flush_cached_frames (); } static void print_fpu_flags (int flags) { if (flags & (1 << 0)) fputs ("IVO ", stdout); if (flags & (1 << 1)) fputs ("DVZ ", stdout); if (flags & (1 << 2)) fputs ("OFL ", stdout); if (flags & (1 << 3)) fputs ("UFL ", stdout); if (flags & (1 << 4)) fputs ("INX ", stdout); putchar ('\n'); } /* Print interesting information about the floating point processor (if present) or emulator. */ static void arm_print_float_info (struct gdbarch *gdbarch, struct ui_file *file, struct frame_info *frame, const char *args) { register unsigned long status = read_register (ARM_FPS_REGNUM); int type; type = (status >> 24) & 127; printf ("%s FPU type %d\n", (status & (1 << 31)) ? "Hardware" : "Software", type); fputs ("mask: ", stdout); print_fpu_flags (status >> 16); fputs ("flags: ", stdout); print_fpu_flags (status); } /* Return the GDB type object for the "standard" data type of data in register N. */ static struct type * arm_register_type (int regnum) { if (regnum >= ARM_F0_REGNUM && regnum < ARM_F0_REGNUM + NUM_FREGS) { if (TARGET_BYTE_ORDER == BFD_ENDIAN_BIG) return builtin_type_arm_ext_big; else return builtin_type_arm_ext_littlebyte_bigword; } else return builtin_type_int32; } /* Index within `registers' of the first byte of the space for register N. */ static int arm_register_byte (int regnum) { if (regnum < ARM_F0_REGNUM) return regnum * INT_REGISTER_RAW_SIZE; else if (regnum < ARM_PS_REGNUM) return (NUM_GREGS * INT_REGISTER_RAW_SIZE + (regnum - ARM_F0_REGNUM) * FP_REGISTER_RAW_SIZE); else return (NUM_GREGS * INT_REGISTER_RAW_SIZE + NUM_FREGS * FP_REGISTER_RAW_SIZE + (regnum - ARM_FPS_REGNUM) * STATUS_REGISTER_SIZE); } /* Number of bytes of storage in the actual machine representation for register N. All registers are 4 bytes, except fp0 - fp7, which are 12 bytes in length. */ static int arm_register_raw_size (int regnum) { if (regnum < ARM_F0_REGNUM) return INT_REGISTER_RAW_SIZE; else if (regnum < ARM_FPS_REGNUM) return FP_REGISTER_RAW_SIZE; else return STATUS_REGISTER_SIZE; } /* Number of bytes of storage in a program's representation for register N. */ static int arm_register_virtual_size (int regnum) { if (regnum < ARM_F0_REGNUM) return INT_REGISTER_VIRTUAL_SIZE; else if (regnum < ARM_FPS_REGNUM) return FP_REGISTER_VIRTUAL_SIZE; else return STATUS_REGISTER_SIZE; } /* Map GDB internal REGNUM onto the Arm simulator register numbers. */ static int arm_register_sim_regno (int regnum) { int reg = regnum; gdb_assert (reg >= 0 && reg < NUM_REGS); if (reg < NUM_GREGS) return SIM_ARM_R0_REGNUM + reg; reg -= NUM_GREGS; if (reg < NUM_FREGS) return SIM_ARM_FP0_REGNUM + reg; reg -= NUM_FREGS; if (reg < NUM_SREGS) return SIM_ARM_FPS_REGNUM + reg; reg -= NUM_SREGS; internal_error (__FILE__, __LINE__, "Bad REGNUM %d", regnum); } /* NOTE: cagney/2001-08-20: Both convert_from_extended() and convert_to_extended() use floatformat_arm_ext_littlebyte_bigword. It is thought that this is is the floating-point register format on little-endian systems. */ static void convert_from_extended (void *ptr, void *dbl) { DOUBLEST d; if (TARGET_BYTE_ORDER == BFD_ENDIAN_BIG) floatformat_to_doublest (&floatformat_arm_ext_big, ptr, &d); else floatformat_to_doublest (&floatformat_arm_ext_littlebyte_bigword, ptr, &d); floatformat_from_doublest (TARGET_DOUBLE_FORMAT, &d, dbl); } static void convert_to_extended (void *dbl, void *ptr) { DOUBLEST d; floatformat_to_doublest (TARGET_DOUBLE_FORMAT, ptr, &d); if (TARGET_BYTE_ORDER == BFD_ENDIAN_BIG) floatformat_from_doublest (&floatformat_arm_ext_big, &d, dbl); else floatformat_from_doublest (&floatformat_arm_ext_littlebyte_bigword, &d, dbl); } static int condition_true (unsigned long cond, unsigned long status_reg) { if (cond == INST_AL || cond == INST_NV) return 1; switch (cond) { case INST_EQ: return ((status_reg & FLAG_Z) != 0); case INST_NE: return ((status_reg & FLAG_Z) == 0); case INST_CS: return ((status_reg & FLAG_C) != 0); case INST_CC: return ((status_reg & FLAG_C) == 0); case INST_MI: return ((status_reg & FLAG_N) != 0); case INST_PL: return ((status_reg & FLAG_N) == 0); case INST_VS: return ((status_reg & FLAG_V) != 0); case INST_VC: return ((status_reg & FLAG_V) == 0); case INST_HI: return ((status_reg & (FLAG_C | FLAG_Z)) == FLAG_C); case INST_LS: return ((status_reg & (FLAG_C | FLAG_Z)) != FLAG_C); case INST_GE: return (((status_reg & FLAG_N) == 0) == ((status_reg & FLAG_V) == 0)); case INST_LT: return (((status_reg & FLAG_N) == 0) != ((status_reg & FLAG_V) == 0)); case INST_GT: return (((status_reg & FLAG_Z) == 0) && (((status_reg & FLAG_N) == 0) == ((status_reg & FLAG_V) == 0))); case INST_LE: return (((status_reg & FLAG_Z) != 0) || (((status_reg & FLAG_N) == 0) != ((status_reg & FLAG_V) == 0))); } return 1; } /* Support routines for single stepping. Calculate the next PC value. */ #define submask(x) ((1L << ((x) + 1)) - 1) #define bit(obj,st) (((obj) >> (st)) & 1) #define bits(obj,st,fn) (((obj) >> (st)) & submask ((fn) - (st))) #define sbits(obj,st,fn) \ ((long) (bits(obj,st,fn) | ((long) bit(obj,fn) * ~ submask (fn - st)))) #define BranchDest(addr,instr) \ ((CORE_ADDR) (((long) (addr)) + 8 + (sbits (instr, 0, 23) << 2))) #define ARM_PC_32 1 static unsigned long shifted_reg_val (unsigned long inst, int carry, unsigned long pc_val, unsigned long status_reg) { unsigned long res, shift; int rm = bits (inst, 0, 3); unsigned long shifttype = bits (inst, 5, 6); if (bit (inst, 4)) { int rs = bits (inst, 8, 11); shift = (rs == 15 ? pc_val + 8 : read_register (rs)) & 0xFF; } else shift = bits (inst, 7, 11); res = (rm == 15 ? ((pc_val | (ARM_PC_32 ? 0 : status_reg)) + (bit (inst, 4) ? 12 : 8)) : read_register (rm)); switch (shifttype) { case 0: /* LSL */ res = shift >= 32 ? 0 : res << shift; break; case 1: /* LSR */ res = shift >= 32 ? 0 : res >> shift; break; case 2: /* ASR */ if (shift >= 32) shift = 31; res = ((res & 0x80000000L) ? ~((~res) >> shift) : res >> shift); break; case 3: /* ROR/RRX */ shift &= 31; if (shift == 0) res = (res >> 1) | (carry ? 0x80000000L : 0); else res = (res >> shift) | (res << (32 - shift)); break; } return res & 0xffffffff; } /* Return number of 1-bits in VAL. */ static int bitcount (unsigned long val) { int nbits; for (nbits = 0; val != 0; nbits++) val &= val - 1; /* delete rightmost 1-bit in val */ return nbits; } CORE_ADDR thumb_get_next_pc (CORE_ADDR pc) { unsigned long pc_val = ((unsigned long) pc) + 4; /* PC after prefetch */ unsigned short inst1 = read_memory_integer (pc, 2); CORE_ADDR nextpc = pc + 2; /* default is next instruction */ unsigned long offset; if ((inst1 & 0xff00) == 0xbd00) /* pop {rlist, pc} */ { CORE_ADDR sp; /* Fetch the saved PC from the stack. It's stored above all of the other registers. */ offset = bitcount (bits (inst1, 0, 7)) * REGISTER_SIZE; sp = read_register (ARM_SP_REGNUM); nextpc = (CORE_ADDR) read_memory_integer (sp + offset, 4); nextpc = ADDR_BITS_REMOVE (nextpc); if (nextpc == pc) error ("Infinite loop detected"); } else if ((inst1 & 0xf000) == 0xd000) /* conditional branch */ { unsigned long status = read_register (ARM_PS_REGNUM); unsigned long cond = bits (inst1, 8, 11); if (cond != 0x0f && condition_true (cond, status)) /* 0x0f = SWI */ nextpc = pc_val + (sbits (inst1, 0, 7) << 1); } else if ((inst1 & 0xf800) == 0xe000) /* unconditional branch */ { nextpc = pc_val + (sbits (inst1, 0, 10) << 1); } else if ((inst1 & 0xf800) == 0xf000) /* long branch with link */ { unsigned short inst2 = read_memory_integer (pc + 2, 2); offset = (sbits (inst1, 0, 10) << 12) + (bits (inst2, 0, 10) << 1); nextpc = pc_val + offset; } return nextpc; } CORE_ADDR arm_get_next_pc (CORE_ADDR pc) { unsigned long pc_val; unsigned long this_instr; unsigned long status; CORE_ADDR nextpc; if (arm_pc_is_thumb (pc)) return thumb_get_next_pc (pc); pc_val = (unsigned long) pc; this_instr = read_memory_integer (pc, 4); status = read_register (ARM_PS_REGNUM); nextpc = (CORE_ADDR) (pc_val + 4); /* Default case */ if (condition_true (bits (this_instr, 28, 31), status)) { switch (bits (this_instr, 24, 27)) { case 0x0: case 0x1: /* data processing */ case 0x2: case 0x3: { unsigned long operand1, operand2, result = 0; unsigned long rn; int c; if (bits (this_instr, 12, 15) != 15) break; if (bits (this_instr, 22, 25) == 0 && bits (this_instr, 4, 7) == 9) /* multiply */ error ("Illegal update to pc in instruction"); /* Multiply into PC */ c = (status & FLAG_C) ? 1 : 0; rn = bits (this_instr, 16, 19); operand1 = (rn == 15) ? pc_val + 8 : read_register (rn); if (bit (this_instr, 25)) { unsigned long immval = bits (this_instr, 0, 7); unsigned long rotate = 2 * bits (this_instr, 8, 11); operand2 = ((immval >> rotate) | (immval << (32 - rotate))) & 0xffffffff; } else /* operand 2 is a shifted register */ operand2 = shifted_reg_val (this_instr, c, pc_val, status); switch (bits (this_instr, 21, 24)) { case 0x0: /*and */ result = operand1 & operand2; break; case 0x1: /*eor */ result = operand1 ^ operand2; break; case 0x2: /*sub */ result = operand1 - operand2; break; case 0x3: /*rsb */ result = operand2 - operand1; break; case 0x4: /*add */ result = operand1 + operand2; break; case 0x5: /*adc */ result = operand1 + operand2 + c; break; case 0x6: /*sbc */ result = operand1 - operand2 + c; break; case 0x7: /*rsc */ result = operand2 - operand1 + c; break; case 0x8: case 0x9: case 0xa: case 0xb: /* tst, teq, cmp, cmn */ result = (unsigned long) nextpc; break; case 0xc: /*orr */ result = operand1 | operand2; break; case 0xd: /*mov */ /* Always step into a function. */ result = operand2; break; case 0xe: /*bic */ result = operand1 & ~operand2; break; case 0xf: /*mvn */ result = ~operand2; break; } nextpc = (CORE_ADDR) ADDR_BITS_REMOVE (result); if (nextpc == pc) error ("Infinite loop detected"); break; } case 0x4: case 0x5: /* data transfer */ case 0x6: case 0x7: if (bit (this_instr, 20)) { /* load */ if (bits (this_instr, 12, 15) == 15) { /* rd == pc */ unsigned long rn; unsigned long base; if (bit (this_instr, 22)) error ("Illegal update to pc in instruction"); /* byte write to PC */ rn = bits (this_instr, 16, 19); base = (rn == 15) ? pc_val + 8 : read_register (rn); if (bit (this_instr, 24)) { /* pre-indexed */ int c = (status & FLAG_C) ? 1 : 0; unsigned long offset = (bit (this_instr, 25) ? shifted_reg_val (this_instr, c, pc_val, status) : bits (this_instr, 0, 11)); if (bit (this_instr, 23)) base += offset; else base -= offset; } nextpc = (CORE_ADDR) read_memory_integer ((CORE_ADDR) base, 4); nextpc = ADDR_BITS_REMOVE (nextpc); if (nextpc == pc) error ("Infinite loop detected"); } } break; case 0x8: case 0x9: /* block transfer */ if (bit (this_instr, 20)) { /* LDM */ if (bit (this_instr, 15)) { /* loading pc */ int offset = 0; if (bit (this_instr, 23)) { /* up */ unsigned long reglist = bits (this_instr, 0, 14); offset = bitcount (reglist) * 4; if (bit (this_instr, 24)) /* pre */ offset += 4; } else if (bit (this_instr, 24)) offset = -4; { unsigned long rn_val = read_register (bits (this_instr, 16, 19)); nextpc = (CORE_ADDR) read_memory_integer ((CORE_ADDR) (rn_val + offset), 4); } nextpc = ADDR_BITS_REMOVE (nextpc); if (nextpc == pc) error ("Infinite loop detected"); } } break; case 0xb: /* branch & link */ case 0xa: /* branch */ { nextpc = BranchDest (pc, this_instr); nextpc = ADDR_BITS_REMOVE (nextpc); if (nextpc == pc) error ("Infinite loop detected"); break; } case 0xc: case 0xd: case 0xe: /* coproc ops */ case 0xf: /* SWI */ break; default: fprintf_filtered (gdb_stderr, "Bad bit-field extraction\n"); return (pc); } } return nextpc; } /* single_step() is called just before we want to resume the inferior, if we want to single-step it but there is no hardware or kernel single-step support. We find the target of the coming instruction and breakpoint it. single_step() is also called just after the inferior stops. If we had set up a simulated single-step, we undo our damage. */ static void arm_software_single_step (enum target_signal sig, int insert_bpt) { static int next_pc; /* State between setting and unsetting. */ static char break_mem[BREAKPOINT_MAX]; /* Temporary storage for mem@bpt */ if (insert_bpt) { next_pc = arm_get_next_pc (read_register (ARM_PC_REGNUM)); target_insert_breakpoint (next_pc, break_mem); } else target_remove_breakpoint (next_pc, break_mem); } #include "bfd-in2.h" #include "libcoff.h" static int gdb_print_insn_arm (bfd_vma memaddr, disassemble_info *info) { if (arm_pc_is_thumb (memaddr)) { static asymbol *asym; static combined_entry_type ce; static struct coff_symbol_struct csym; static struct _bfd fake_bfd; static bfd_target fake_target; if (csym.native == NULL) { /* Create a fake symbol vector containing a Thumb symbol. This is solely so that the code in print_insn_little_arm() and print_insn_big_arm() in opcodes/arm-dis.c will detect the presence of a Thumb symbol and switch to decoding Thumb instructions. */ fake_target.flavour = bfd_target_coff_flavour; fake_bfd.xvec = &fake_target; ce.u.syment.n_sclass = C_THUMBEXTFUNC; csym.native = &ce; csym.symbol.the_bfd = &fake_bfd; csym.symbol.name = "fake"; asym = (asymbol *) & csym; } memaddr = UNMAKE_THUMB_ADDR (memaddr); info->symbols = &asym; } else info->symbols = NULL; if (TARGET_BYTE_ORDER == BFD_ENDIAN_BIG) return print_insn_big_arm (memaddr, info); else return print_insn_little_arm (memaddr, info); } /* The following define instruction sequences that will cause ARM cpu's to take an undefined instruction trap. These are used to signal a breakpoint to GDB. The newer ARMv4T cpu's are capable of operating in ARM or Thumb modes. A different instruction is required for each mode. The ARM cpu's can also be big or little endian. Thus four different instructions are needed to support all cases. Note: ARMv4 defines several new instructions that will take the undefined instruction trap. ARM7TDMI is nominally ARMv4T, but does not in fact add the new instructions. The new undefined instructions in ARMv4 are all instructions that had no defined behaviour in earlier chips. There is no guarantee that they will raise an exception, but may be treated as NOP's. In practice, it may only safe to rely on instructions matching: 3 3 2 2 2 2 2 2 2 2 2 2 1 1 1 1 1 1 1 1 1 1 1 0 9 8 7 6 5 4 3 2 1 0 9 8 7 6 5 4 3 2 1 0 9 8 7 6 5 4 3 2 1 0 C C C C 0 1 1 x x x x x x x x x x x x x x x x x x x x 1 x x x x Even this may only true if the condition predicate is true. The following use a condition predicate of ALWAYS so it is always TRUE. There are other ways of forcing a breakpoint. GNU/Linux, RISC iX, and NetBSD all use a software interrupt rather than an undefined instruction to force a trap. This can be handled by by the abi-specific code during establishment of the gdbarch vector. */ /* NOTE rearnsha 2002-02-18: for now we allow a non-multi-arch gdb to override these definitions. */ #ifndef ARM_LE_BREAKPOINT #define ARM_LE_BREAKPOINT {0xFE,0xDE,0xFF,0xE7} #endif #ifndef ARM_BE_BREAKPOINT #define ARM_BE_BREAKPOINT {0xE7,0xFF,0xDE,0xFE} #endif #ifndef THUMB_LE_BREAKPOINT #define THUMB_LE_BREAKPOINT {0xfe,0xdf} #endif #ifndef THUMB_BE_BREAKPOINT #define THUMB_BE_BREAKPOINT {0xdf,0xfe} #endif static const char arm_default_arm_le_breakpoint[] = ARM_LE_BREAKPOINT; static const char arm_default_arm_be_breakpoint[] = ARM_BE_BREAKPOINT; static const char arm_default_thumb_le_breakpoint[] = THUMB_LE_BREAKPOINT; static const char arm_default_thumb_be_breakpoint[] = THUMB_BE_BREAKPOINT; /* Determine the type and size of breakpoint to insert at PCPTR. Uses the program counter value to determine whether a 16-bit or 32-bit breakpoint should be used. It returns a pointer to a string of bytes that encode a breakpoint instruction, stores the length of the string to *lenptr, and adjusts the program counter (if necessary) to point to the actual memory location where the breakpoint should be inserted. */ /* XXX ??? from old tm-arm.h: if we're using RDP, then we're inserting breakpoints and storing their handles instread of what was in memory. It is nice that this is the same size as a handle - otherwise remote-rdp will have to change. */ static const unsigned char * arm_breakpoint_from_pc (CORE_ADDR *pcptr, int *lenptr) { struct gdbarch_tdep *tdep = gdbarch_tdep (current_gdbarch); if (arm_pc_is_thumb (*pcptr) || arm_pc_is_thumb_dummy (*pcptr)) { *pcptr = UNMAKE_THUMB_ADDR (*pcptr); *lenptr = tdep->thumb_breakpoint_size; return tdep->thumb_breakpoint; } else { *lenptr = tdep->arm_breakpoint_size; return tdep->arm_breakpoint; } } /* Extract from an array REGBUF containing the (raw) register state a function return value of type TYPE, and copy that, in virtual format, into VALBUF. */ static void arm_extract_return_value (struct type *type, char regbuf[REGISTER_BYTES], char *valbuf) { if (TYPE_CODE_FLT == TYPE_CODE (type)) { struct gdbarch_tdep *tdep = gdbarch_tdep (current_gdbarch); switch (tdep->fp_model) { case ARM_FLOAT_FPA: convert_from_extended (®buf[REGISTER_BYTE (ARM_F0_REGNUM)], valbuf); break; case ARM_FLOAT_SOFT: case ARM_FLOAT_SOFT_VFP: memcpy (valbuf, ®buf[REGISTER_BYTE (ARM_A1_REGNUM)], TYPE_LENGTH (type)); break; default: internal_error (__FILE__, __LINE__, "arm_extract_return_value: Floating point model not supported"); break; } } else memcpy (valbuf, ®buf[REGISTER_BYTE (ARM_A1_REGNUM)], TYPE_LENGTH (type)); } /* Extract from an array REGBUF containing the (raw) register state the address in which a function should return its structure value. */ static CORE_ADDR arm_extract_struct_value_address (char *regbuf) { return extract_address (regbuf, REGISTER_RAW_SIZE(ARM_A1_REGNUM)); } /* Will a function return an aggregate type in memory or in a register? Return 0 if an aggregate type can be returned in a register, 1 if it must be returned in memory. */ static int arm_use_struct_convention (int gcc_p, struct type *type) { int nRc; register enum type_code code; /* In the ARM ABI, "integer" like aggregate types are returned in registers. For an aggregate type to be integer like, its size must be less than or equal to REGISTER_SIZE and the offset of each addressable subfield must be zero. Note that bit fields are not addressable, and all addressable subfields of unions always start at offset zero. This function is based on the behaviour of GCC 2.95.1. See: gcc/arm.c: arm_return_in_memory() for details. Note: All versions of GCC before GCC 2.95.2 do not set up the parameters correctly for a function returning the following structure: struct { float f;}; This should be returned in memory, not a register. Richard Earnshaw sent me a patch, but I do not know of any way to detect if a function like the above has been compiled with the correct calling convention. */ /* All aggregate types that won't fit in a register must be returned in memory. */ if (TYPE_LENGTH (type) > REGISTER_SIZE) { return 1; } /* The only aggregate types that can be returned in a register are structs and unions. Arrays must be returned in memory. */ code = TYPE_CODE (type); if ((TYPE_CODE_STRUCT != code) && (TYPE_CODE_UNION != code)) { return 1; } /* Assume all other aggregate types can be returned in a register. Run a check for structures, unions and arrays. */ nRc = 0; if ((TYPE_CODE_STRUCT == code) || (TYPE_CODE_UNION == code)) { int i; /* Need to check if this struct/union is "integer" like. For this to be true, its size must be less than or equal to REGISTER_SIZE and the offset of each addressable subfield must be zero. Note that bit fields are not addressable, and unions always start at offset zero. If any of the subfields is a floating point type, the struct/union cannot be an integer type. */ /* For each field in the object, check: 1) Is it FP? --> yes, nRc = 1; 2) Is it addressable (bitpos != 0) and not packed (bitsize == 0)? --> yes, nRc = 1 */ for (i = 0; i < TYPE_NFIELDS (type); i++) { enum type_code field_type_code; field_type_code = TYPE_CODE (TYPE_FIELD_TYPE (type, i)); /* Is it a floating point type field? */ if (field_type_code == TYPE_CODE_FLT) { nRc = 1; break; } /* If bitpos != 0, then we have to care about it. */ if (TYPE_FIELD_BITPOS (type, i) != 0) { /* Bitfields are not addressable. If the field bitsize is zero, then the field is not packed. Hence it cannot be a bitfield or any other packed type. */ if (TYPE_FIELD_BITSIZE (type, i) == 0) { nRc = 1; break; } } } } return nRc; } /* Write into appropriate registers a function return value of type TYPE, given in virtual format. */ static void arm_store_return_value (struct type *type, char *valbuf) { if (TYPE_CODE (type) == TYPE_CODE_FLT) { struct gdbarch_tdep *tdep = gdbarch_tdep (current_gdbarch); char buf[ARM_MAX_REGISTER_RAW_SIZE]; switch (tdep->fp_model) { case ARM_FLOAT_FPA: convert_to_extended (valbuf, buf); write_register_bytes (REGISTER_BYTE (ARM_F0_REGNUM), buf, FP_REGISTER_RAW_SIZE); break; case ARM_FLOAT_SOFT: case ARM_FLOAT_SOFT_VFP: write_register_bytes (ARM_A1_REGNUM, valbuf, TYPE_LENGTH (type)); break; default: internal_error (__FILE__, __LINE__, "arm_store_return_value: Floating point model not supported"); break; } } else write_register_bytes (ARM_A1_REGNUM, valbuf, TYPE_LENGTH (type)); } /* Store the address of the place in which to copy the structure the subroutine will return. This is called from call_function. */ static void arm_store_struct_return (CORE_ADDR addr, CORE_ADDR sp) { write_register (ARM_A1_REGNUM, addr); } static int arm_get_longjmp_target (CORE_ADDR *pc) { CORE_ADDR jb_addr; char buf[INT_REGISTER_RAW_SIZE]; struct gdbarch_tdep *tdep = gdbarch_tdep (current_gdbarch); jb_addr = read_register (ARM_A1_REGNUM); if (target_read_memory (jb_addr + tdep->jb_pc * tdep->jb_elt_size, buf, INT_REGISTER_RAW_SIZE)) return 0; *pc = extract_address (buf, INT_REGISTER_RAW_SIZE); return 1; } /* Return non-zero if the PC is inside a thumb call thunk. */ int arm_in_call_stub (CORE_ADDR pc, char *name) { CORE_ADDR start_addr; /* Find the starting address of the function containing the PC. If the caller didn't give us a name, look it up at the same time. */ if (0 == find_pc_partial_function (pc, name ? NULL : &name, &start_addr, NULL)) return 0; return strncmp (name, "_call_via_r", 11) == 0; } /* If PC is in a Thumb call or return stub, return the address of the target PC, which is in a register. The thunk functions are called _called_via_xx, where x is the register name. The possible names are r0-r9, sl, fp, ip, sp, and lr. */ CORE_ADDR arm_skip_stub (CORE_ADDR pc) { char *name; CORE_ADDR start_addr; /* Find the starting address and name of the function containing the PC. */ if (find_pc_partial_function (pc, &name, &start_addr, NULL) == 0) return 0; /* Call thunks always start with "_call_via_". */ if (strncmp (name, "_call_via_", 10) == 0) { /* Use the name suffix to determine which register contains the target PC. */ static char *table[15] = {"r0", "r1", "r2", "r3", "r4", "r5", "r6", "r7", "r8", "r9", "sl", "fp", "ip", "sp", "lr" }; int regno; for (regno = 0; regno <= 14; regno++) if (strcmp (&name[10], table[regno]) == 0) return read_register (regno); } return 0; /* not a stub */ } /* If the user changes the register disassembly flavor used for info register and other commands, we have to also switch the flavor used in opcodes for disassembly output. This function is run in the set disassembly_flavor command, and does that. */ static void set_disassembly_flavor_sfunc (char *args, int from_tty, struct cmd_list_element *c) { set_disassembly_flavor (); } /* Return the ARM register name corresponding to register I. */ static const char * arm_register_name (int i) { return arm_register_names[i]; } static void set_disassembly_flavor (void) { const char *setname, *setdesc, **regnames; int numregs, j; /* Find the flavor that the user wants in the opcodes table. */ int current = 0; numregs = get_arm_regnames (current, &setname, &setdesc, ®names); while ((disassembly_flavor != setname) && (current < num_flavor_options)) get_arm_regnames (++current, &setname, &setdesc, ®names); current_option = current; /* Fill our copy. */ for (j = 0; j < numregs; j++) arm_register_names[j] = (char *) regnames[j]; /* Adjust case. */ if (isupper (*regnames[ARM_PC_REGNUM])) { arm_register_names[ARM_FPS_REGNUM] = "FPS"; arm_register_names[ARM_PS_REGNUM] = "CPSR"; } else { arm_register_names[ARM_FPS_REGNUM] = "fps"; arm_register_names[ARM_PS_REGNUM] = "cpsr"; } /* Synchronize the disassembler. */ set_arm_regname_option (current); } /* arm_othernames implements the "othernames" command. This is kind of hacky, and I prefer the set-show disassembly-flavor which is also used for the x86 gdb. I will keep this around, however, in case anyone is actually using it. */ static void arm_othernames (char *names, int n) { /* Circle through the various flavors. */ current_option = (current_option + 1) % num_flavor_options; disassembly_flavor = valid_flavors[current_option]; set_disassembly_flavor (); } /* Fetch, and possibly build, an appropriate link_map_offsets structure for ARM linux targets using the struct offsets defined in <link.h>. Note, however, that link.h is not actually referred to in this file. Instead, the relevant structs offsets were obtained from examining link.h. (We can't refer to link.h from this file because the host system won't necessarily have it, or if it does, the structs which it defines will refer to the host system, not the target). */ struct link_map_offsets * arm_linux_svr4_fetch_link_map_offsets (void) { static struct link_map_offsets lmo; static struct link_map_offsets *lmp = 0; if (lmp == 0) { lmp = &lmo; lmo.r_debug_size = 8; /* Actual size is 20, but this is all we need. */ lmo.r_map_offset = 4; lmo.r_map_size = 4; lmo.link_map_size = 20; /* Actual size is 552, but this is all we need. */ lmo.l_addr_offset = 0; lmo.l_addr_size = 4; lmo.l_name_offset = 4; lmo.l_name_size = 4; lmo.l_next_offset = 12; lmo.l_next_size = 4; lmo.l_prev_offset = 16; lmo.l_prev_size = 4; } return lmp; } /* Test whether the coff symbol specific value corresponds to a Thumb function. */ static int coff_sym_is_thumb (int val) { return (val == C_THUMBEXT || val == C_THUMBSTAT || val == C_THUMBEXTFUNC || val == C_THUMBSTATFUNC || val == C_THUMBLABEL); } /* arm_coff_make_msymbol_special() arm_elf_make_msymbol_special() These functions test whether the COFF or ELF symbol corresponds to an address in thumb code, and set a "special" bit in a minimal symbol to indicate that it does. */ static void arm_elf_make_msymbol_special(asymbol *sym, struct minimal_symbol *msym) { /* Thumb symbols are of type STT_LOPROC, (synonymous with STT_ARM_TFUNC). */ if (ELF_ST_TYPE (((elf_symbol_type *)sym)->internal_elf_sym.st_info) == STT_LOPROC) MSYMBOL_SET_SPECIAL (msym); } static void arm_coff_make_msymbol_special(int val, struct minimal_symbol *msym) { if (coff_sym_is_thumb (val)) MSYMBOL_SET_SPECIAL (msym); } static enum gdb_osabi arm_elf_osabi_sniffer (bfd *abfd) { unsigned int elfosabi, eflags; enum gdb_osabi osabi = GDB_OSABI_UNKNOWN; elfosabi = elf_elfheader (abfd)->e_ident[EI_OSABI]; switch (elfosabi) { case ELFOSABI_NONE: /* When elfosabi is ELFOSABI_NONE (0), then the ELF structures in the file are conforming to the base specification for that machine (there are no OS-specific extensions). In order to determine the real OS in use we must look for OS notes that have been added. */ bfd_map_over_sections (abfd, generic_elf_osabi_sniff_abi_tag_sections, &osabi); if (osabi == GDB_OSABI_UNKNOWN) { /* Existing ARM tools don't set this field, so look at the EI_FLAGS field for more information. */ eflags = EF_ARM_EABI_VERSION(elf_elfheader(abfd)->e_flags); switch (eflags) { case EF_ARM_EABI_VER1: osabi = GDB_OSABI_ARM_EABI_V1; break; case EF_ARM_EABI_VER2: osabi = GDB_OSABI_ARM_EABI_V2; break; case EF_ARM_EABI_UNKNOWN: /* Assume GNU tools. */ osabi = GDB_OSABI_ARM_APCS; break; default: internal_error (__FILE__, __LINE__, "arm_elf_osabi_sniffer: Unknown ARM EABI " "version 0x%x", eflags); } } break; case ELFOSABI_ARM: /* GNU tools use this value. Check note sections in this case, as well. */ bfd_map_over_sections (abfd, generic_elf_osabi_sniff_abi_tag_sections, &osabi); if (osabi == GDB_OSABI_UNKNOWN) { /* Assume APCS ABI. */ osabi = GDB_OSABI_ARM_APCS; } break; case ELFOSABI_FREEBSD: osabi = GDB_OSABI_FREEBSD_ELF; break; case ELFOSABI_NETBSD: osabi = GDB_OSABI_NETBSD_ELF; break; case ELFOSABI_LINUX: osabi = GDB_OSABI_LINUX; break; } return osabi; } /* Initialize the current architecture based on INFO. If possible, re-use an architecture from ARCHES, which is a list of architectures already created during this debugging session. Called e.g. at program startup, when reading a core file, and when reading a binary file. */ static struct gdbarch * arm_gdbarch_init (struct gdbarch_info info, struct gdbarch_list *arches) { struct gdbarch_tdep *tdep; struct gdbarch *gdbarch; enum gdb_osabi osabi = GDB_OSABI_UNKNOWN; /* Try to deterimine the ABI of the object we are loading. */ if (info.abfd != NULL) { osabi = gdbarch_lookup_osabi (info.abfd); if (osabi == GDB_OSABI_UNKNOWN) { switch (bfd_get_flavour (info.abfd)) { case bfd_target_aout_flavour: /* Assume it's an old APCS-style ABI. */ osabi = GDB_OSABI_ARM_APCS; break; case bfd_target_coff_flavour: /* Assume it's an old APCS-style ABI. */ /* XXX WinCE? */ osabi = GDB_OSABI_ARM_APCS; break; default: /* Leave it as "unknown". */ } } } /* Find a candidate among extant architectures. */ for (arches = gdbarch_list_lookup_by_info (arches, &info); arches != NULL; arches = gdbarch_list_lookup_by_info (arches->next, &info)) { /* Make sure the ABI selection matches. */ tdep = gdbarch_tdep (arches->gdbarch); if (tdep && tdep->osabi == osabi) return arches->gdbarch; } tdep = xmalloc (sizeof (struct gdbarch_tdep)); gdbarch = gdbarch_alloc (&info, tdep); tdep->osabi = osabi; /* This is the way it has always defaulted. */ tdep->fp_model = ARM_FLOAT_FPA; /* Breakpoints. */ switch (info.byte_order) { case BFD_ENDIAN_BIG: tdep->arm_breakpoint = arm_default_arm_be_breakpoint; tdep->arm_breakpoint_size = sizeof (arm_default_arm_be_breakpoint); tdep->thumb_breakpoint = arm_default_thumb_be_breakpoint; tdep->thumb_breakpoint_size = sizeof (arm_default_thumb_be_breakpoint); break; case BFD_ENDIAN_LITTLE: tdep->arm_breakpoint = arm_default_arm_le_breakpoint; tdep->arm_breakpoint_size = sizeof (arm_default_arm_le_breakpoint); tdep->thumb_breakpoint = arm_default_thumb_le_breakpoint; tdep->thumb_breakpoint_size = sizeof (arm_default_thumb_le_breakpoint); break; default: internal_error (__FILE__, __LINE__, "arm_gdbarch_init: bad byte order for float format"); } /* On ARM targets char defaults to unsigned. */ set_gdbarch_char_signed (gdbarch, 0); /* This should be low enough for everything. */ tdep->lowest_pc = 0x20; tdep->jb_pc = -1; /* Longjump support not enabled by default. */ #if OLD_STYLE_ARM_DUMMY_FRAMES /* NOTE: cagney/2002-05-07: Enable the below to restore the old ARM specific (non-generic) dummy frame code. Might be useful if there appears to be a problem with the generic dummy frame mechanism that replaced it. */ set_gdbarch_use_generic_dummy_frames (gdbarch, 0); /* Call dummy code. */ set_gdbarch_call_dummy_location (gdbarch, ON_STACK); set_gdbarch_call_dummy_breakpoint_offset_p (gdbarch, 1); /* We have to give this a value now, even though we will re-set it during each call to arm_fix_call_dummy. */ set_gdbarch_call_dummy_breakpoint_offset (gdbarch, 8); set_gdbarch_call_dummy_p (gdbarch, 1); set_gdbarch_call_dummy_stack_adjust_p (gdbarch, 0); set_gdbarch_call_dummy_words (gdbarch, arm_call_dummy_words); set_gdbarch_sizeof_call_dummy_words (gdbarch, sizeof (arm_call_dummy_words)); set_gdbarch_call_dummy_start_offset (gdbarch, 0); set_gdbarch_call_dummy_length (gdbarch, 0); set_gdbarch_fix_call_dummy (gdbarch, arm_fix_call_dummy); set_gdbarch_pc_in_call_dummy (gdbarch, pc_in_call_dummy_on_stack); #else set_gdbarch_use_generic_dummy_frames (gdbarch, 1); set_gdbarch_call_dummy_location (gdbarch, AT_ENTRY_POINT); set_gdbarch_call_dummy_breakpoint_offset_p (gdbarch, 1); set_gdbarch_call_dummy_breakpoint_offset (gdbarch, 0); set_gdbarch_call_dummy_p (gdbarch, 1); set_gdbarch_call_dummy_stack_adjust_p (gdbarch, 0); set_gdbarch_call_dummy_words (gdbarch, arm_call_dummy_words); set_gdbarch_sizeof_call_dummy_words (gdbarch, 0); set_gdbarch_call_dummy_start_offset (gdbarch, 0); set_gdbarch_call_dummy_length (gdbarch, 0); set_gdbarch_fix_call_dummy (gdbarch, generic_fix_call_dummy); set_gdbarch_pc_in_call_dummy (gdbarch, generic_pc_in_call_dummy); set_gdbarch_call_dummy_address (gdbarch, entry_point_address); set_gdbarch_push_return_address (gdbarch, arm_push_return_address); #endif set_gdbarch_get_saved_register (gdbarch, generic_get_saved_register); set_gdbarch_push_arguments (gdbarch, arm_push_arguments); set_gdbarch_coerce_float_to_double (gdbarch, standard_coerce_float_to_double); /* Frame handling. */ set_gdbarch_frame_chain_valid (gdbarch, arm_frame_chain_valid); set_gdbarch_init_extra_frame_info (gdbarch, arm_init_extra_frame_info); set_gdbarch_read_fp (gdbarch, arm_read_fp); set_gdbarch_frame_chain (gdbarch, arm_frame_chain); set_gdbarch_frameless_function_invocation (gdbarch, arm_frameless_function_invocation); set_gdbarch_frame_saved_pc (gdbarch, arm_frame_saved_pc); set_gdbarch_frame_args_address (gdbarch, arm_frame_args_address); set_gdbarch_frame_locals_address (gdbarch, arm_frame_locals_address); set_gdbarch_frame_num_args (gdbarch, arm_frame_num_args); set_gdbarch_frame_args_skip (gdbarch, 0); set_gdbarch_frame_init_saved_regs (gdbarch, arm_frame_init_saved_regs); #if OLD_STYLE_ARM_DUMMY_FRAMES /* NOTE: cagney/2002-05-07: Enable the below to restore the old ARM specific (non-generic) dummy frame code. Might be useful if there appears to be a problem with the generic dummy frame mechanism that replaced it. */ set_gdbarch_push_dummy_frame (gdbarch, arm_push_dummy_frame); #else set_gdbarch_push_dummy_frame (gdbarch, generic_push_dummy_frame); #endif set_gdbarch_pop_frame (gdbarch, arm_pop_frame); /* Address manipulation. */ set_gdbarch_smash_text_address (gdbarch, arm_smash_text_address); set_gdbarch_addr_bits_remove (gdbarch, arm_addr_bits_remove); /* Offset from address of function to start of its code. */ set_gdbarch_function_start_offset (gdbarch, 0); /* Advance PC across function entry code. */ set_gdbarch_skip_prologue (gdbarch, arm_skip_prologue); /* Get the PC when a frame might not be available. */ set_gdbarch_saved_pc_after_call (gdbarch, arm_saved_pc_after_call); /* The stack grows downward. */ set_gdbarch_inner_than (gdbarch, core_addr_lessthan); /* Breakpoint manipulation. */ set_gdbarch_breakpoint_from_pc (gdbarch, arm_breakpoint_from_pc); set_gdbarch_decr_pc_after_break (gdbarch, 0); /* Information about registers, etc. */ set_gdbarch_print_float_info (gdbarch, arm_print_float_info); set_gdbarch_fp_regnum (gdbarch, ARM_FP_REGNUM); /* ??? */ set_gdbarch_sp_regnum (gdbarch, ARM_SP_REGNUM); set_gdbarch_pc_regnum (gdbarch, ARM_PC_REGNUM); set_gdbarch_register_byte (gdbarch, arm_register_byte); set_gdbarch_register_bytes (gdbarch, (NUM_GREGS * INT_REGISTER_RAW_SIZE + NUM_FREGS * FP_REGISTER_RAW_SIZE + NUM_SREGS * STATUS_REGISTER_SIZE)); set_gdbarch_num_regs (gdbarch, NUM_GREGS + NUM_FREGS + NUM_SREGS); set_gdbarch_register_raw_size (gdbarch, arm_register_raw_size); set_gdbarch_register_virtual_size (gdbarch, arm_register_virtual_size); set_gdbarch_max_register_raw_size (gdbarch, FP_REGISTER_RAW_SIZE); set_gdbarch_max_register_virtual_size (gdbarch, FP_REGISTER_VIRTUAL_SIZE); set_gdbarch_register_virtual_type (gdbarch, arm_register_type); /* Internal <-> external register number maps. */ set_gdbarch_register_sim_regno (gdbarch, arm_register_sim_regno); /* Integer registers are 4 bytes. */ set_gdbarch_register_size (gdbarch, 4); set_gdbarch_register_name (gdbarch, arm_register_name); /* Returning results. */ set_gdbarch_deprecated_extract_return_value (gdbarch, arm_extract_return_value); set_gdbarch_deprecated_store_return_value (gdbarch, arm_store_return_value); set_gdbarch_store_struct_return (gdbarch, arm_store_struct_return); set_gdbarch_use_struct_convention (gdbarch, arm_use_struct_convention); set_gdbarch_deprecated_extract_struct_value_address (gdbarch, arm_extract_struct_value_address); /* Single stepping. */ /* XXX For an RDI target we should ask the target if it can single-step. */ set_gdbarch_software_single_step (gdbarch, arm_software_single_step); /* Minsymbol frobbing. */ set_gdbarch_elf_make_msymbol_special (gdbarch, arm_elf_make_msymbol_special); set_gdbarch_coff_make_msymbol_special (gdbarch, arm_coff_make_msymbol_special); /* Hook in the ABI-specific overrides, if they have been registered. */ gdbarch_init_osabi (info, gdbarch, osabi); /* Now we have tuned the configuration, set a few final things, based on what the OS ABI has told us. */ if (tdep->jb_pc >= 0) set_gdbarch_get_longjmp_target (gdbarch, arm_get_longjmp_target); /* Floating point sizes and format. */ switch (info.byte_order) { case BFD_ENDIAN_BIG: set_gdbarch_float_format (gdbarch, &floatformat_ieee_single_big); set_gdbarch_double_format (gdbarch, &floatformat_ieee_double_big); set_gdbarch_long_double_format (gdbarch, &floatformat_ieee_double_big); break; case BFD_ENDIAN_LITTLE: set_gdbarch_float_format (gdbarch, &floatformat_ieee_single_little); if (tdep->fp_model == ARM_FLOAT_VFP || tdep->fp_model == ARM_FLOAT_SOFT_VFP) { set_gdbarch_double_format (gdbarch, &floatformat_ieee_double_little); set_gdbarch_long_double_format (gdbarch, &floatformat_ieee_double_little); } else { set_gdbarch_double_format (gdbarch, &floatformat_ieee_double_littlebyte_bigword); set_gdbarch_long_double_format (gdbarch, &floatformat_ieee_double_littlebyte_bigword); } break; default: internal_error (__FILE__, __LINE__, "arm_gdbarch_init: bad byte order for float format"); } /* We can't use SIZEOF_FRAME_SAVED_REGS here, since that still references the old architecture vector, not the one we are building here. */ if (prologue_cache.saved_regs != NULL) xfree (prologue_cache.saved_regs); /* We can't use NUM_REGS nor NUM_PSEUDO_REGS here, since that still references the old architecture vector, not the one we are building here. */ prologue_cache.saved_regs = (CORE_ADDR *) xcalloc (1, (sizeof (CORE_ADDR) * (gdbarch_num_regs (gdbarch) + gdbarch_num_pseudo_regs (gdbarch)))); return gdbarch; } static void arm_dump_tdep (struct gdbarch *current_gdbarch, struct ui_file *file) { struct gdbarch_tdep *tdep = gdbarch_tdep (current_gdbarch); if (tdep == NULL) return; fprintf_unfiltered (file, "arm_dump_tdep: OS ABI = %s\n", gdbarch_osabi_name (tdep->osabi)); fprintf_unfiltered (file, "arm_dump_tdep: Lowest pc = 0x%lx", (unsigned long) tdep->lowest_pc); } static void arm_init_abi_eabi_v1 (struct gdbarch_info info, struct gdbarch *gdbarch) { /* Place-holder. */ } static void arm_init_abi_eabi_v2 (struct gdbarch_info info, struct gdbarch *gdbarch) { /* Place-holder. */ } static void arm_init_abi_apcs (struct gdbarch_info info, struct gdbarch *gdbarch) { /* Place-holder. */ } void _initialize_arm_tdep (void) { struct ui_file *stb; long length; struct cmd_list_element *new_cmd; const char *setname; const char *setdesc; const char **regnames; int numregs, i, j; static char *helptext; if (GDB_MULTI_ARCH) gdbarch_register (bfd_arch_arm, arm_gdbarch_init, arm_dump_tdep); /* Register an ELF OS ABI sniffer for ARM binaries. */ gdbarch_register_osabi_sniffer (bfd_arch_arm, bfd_target_elf_flavour, arm_elf_osabi_sniffer); /* Register some ABI variants for embedded systems. */ gdbarch_register_osabi (bfd_arch_arm, GDB_OSABI_ARM_EABI_V1, arm_init_abi_eabi_v1); gdbarch_register_osabi (bfd_arch_arm, GDB_OSABI_ARM_EABI_V2, arm_init_abi_eabi_v2); gdbarch_register_osabi (bfd_arch_arm, GDB_OSABI_ARM_APCS, arm_init_abi_apcs); tm_print_insn = gdb_print_insn_arm; /* Get the number of possible sets of register names defined in opcodes. */ num_flavor_options = get_arm_regname_num_options (); /* Sync the opcode insn printer with our register viewer. */ parse_arm_disassembler_option ("reg-names-std"); /* Begin creating the help text. */ stb = mem_fileopen (); fprintf_unfiltered (stb, "Set the disassembly flavor.\n\ The valid values are:\n"); /* Initialize the array that will be passed to add_set_enum_cmd(). */ valid_flavors = xmalloc ((num_flavor_options + 1) * sizeof (char *)); for (i = 0; i < num_flavor_options; i++) { numregs = get_arm_regnames (i, &setname, &setdesc, ®names); valid_flavors[i] = setname; fprintf_unfiltered (stb, "%s - %s\n", setname, setdesc); /* Copy the default names (if found) and synchronize disassembler. */ if (!strcmp (setname, "std")) { disassembly_flavor = setname; current_option = i; for (j = 0; j < numregs; j++) arm_register_names[j] = (char *) regnames[j]; set_arm_regname_option (i); } } /* Mark the end of valid options. */ valid_flavors[num_flavor_options] = NULL; /* Finish the creation of the help text. */ fprintf_unfiltered (stb, "The default is \"std\"."); helptext = ui_file_xstrdup (stb, &length); ui_file_delete (stb); /* Add the disassembly-flavor command. */ new_cmd = add_set_enum_cmd ("disassembly-flavor", no_class, valid_flavors, &disassembly_flavor, helptext, &setlist); set_cmd_sfunc (new_cmd, set_disassembly_flavor_sfunc); add_show_from_set (new_cmd, &showlist); /* ??? Maybe this should be a boolean. */ add_show_from_set (add_set_cmd ("apcs32", no_class, var_zinteger, (char *) &arm_apcs_32, "Set usage of ARM 32-bit mode.\n", &setlist), &showlist); /* Add the deprecated "othernames" command. */ add_com ("othernames", class_obscure, arm_othernames, "Switch to the next set of register names."); /* Fill in the prologue_cache fields. */ prologue_cache.saved_regs = NULL; prologue_cache.extra_info = (struct frame_extra_info *) xcalloc (1, sizeof (struct frame_extra_info)); /* Debugging flag. */ add_show_from_set (add_set_cmd ("arm", class_maintenance, var_zinteger, &arm_debug, "Set arm debugging.\n\ When non-zero, arm specific debugging is enabled.", &setdebuglist), &showdebuglist); }
Go to most recent revision | Compare with Previous | Blame | View Log