URL
https://opencores.org/ocsvn/or1k/or1k/trunk
Subversion Repositories or1k
[/] [or1k/] [trunk/] [gdb-5.3/] [gdb/] [doc/] [gdbint.info-1] - Rev 1775
Go to most recent revision | Compare with Previous | Blame | View Log
This is gdbint.info, produced by makeinfo version 4.1 from
./gdbint.texinfo.
INFO-DIR-SECTION Programming & development tools.
START-INFO-DIR-ENTRY
* Gdb-Internals: (gdbint). The GNU debugger's internals.
END-INFO-DIR-ENTRY
This file documents the internals of the GNU debugger GDB.
Copyright 1990,1991,1992,1993,1994,1996,1998,1999,2000,2001,2002
Free Software Foundation, Inc. Contributed by Cygnus Solutions.
Written by John Gilmore. Second Edition by Stan Shebs.
Permission is granted to copy, distribute and/or modify this document
under the terms of the GNU Free Documentation License, Version 1.1 or
any later version published by the Free Software Foundation; with no
Invariant Sections, with the Front-Cover Texts being "A GNU Manual,"
and with the Back-Cover Texts as in (a) below.
(a) The FSF's Back-Cover Text is: "You have freedom to copy and
modify this GNU Manual, like GNU software. Copies published by the Free
Software Foundation raise funds for GNU development."
File: gdbint.info, Node: Top, Next: Requirements, Up: (dir)
Scope of this Document
**********************
This document documents the internals of the GNU debugger, GDB. It
includes description of GDB's key algorithms and operations, as well as
the mechanisms that adapt GDB to specific hosts and targets.
* Menu:
* Requirements::
* Overall Structure::
* Algorithms::
* User Interface::
* libgdb::
* Symbol Handling::
* Language Support::
* Host Definition::
* Target Architecture Definition::
* Target Vector Definition::
* Native Debugging::
* Support Libraries::
* Coding::
* Porting GDB::
* Releasing GDB::
* Testsuite::
* Hints::
* GNU Free Documentation License:: The license for this documentation
* Index::
File: gdbint.info, Node: Requirements, Next: Overall Structure, Prev: Top, Up: Top
Requirements
************
Before diving into the internals, you should understand the formal
requirements and other expectations for GDB. Although some of these
may seem obvious, there have been proposals for GDB that have run
counter to these requirements.
First of all, GDB is a debugger. It's not designed to be a front
panel for embedded systems. It's not a text editor. It's not a shell.
It's not a programming environment.
GDB is an interactive tool. Although a batch mode is available,
GDB's primary role is to interact with a human programmer.
GDB should be responsive to the user. A programmer hot on the trail
of a nasty bug, and operating under a looming deadline, is going to be
very impatient of everything, including the response time to debugger
commands.
GDB should be relatively permissive, such as for expressions. While
the compiler should be picky (or have the option to be made picky),
since source code lives for a long time usually, the programmer doing
debugging shouldn't be spending time figuring out to mollify the
debugger.
GDB will be called upon to deal with really large programs.
Executable sizes of 50 to 100 megabytes occur regularly, and we've
heard reports of programs approaching 1 gigabyte in size.
GDB should be able to run everywhere. No other debugger is
available for even half as many configurations as GDB supports.
File: gdbint.info, Node: Overall Structure, Next: Algorithms, Prev: Requirements, Up: Top
Overall Structure
*****************
GDB consists of three major subsystems: user interface, symbol
handling (the "symbol side"), and target system handling (the "target
side").
The user interface consists of several actual interfaces, plus
supporting code.
The symbol side consists of object file readers, debugging info
interpreters, symbol table management, source language expression
parsing, type and value printing.
The target side consists of execution control, stack frame analysis,
and physical target manipulation.
The target side/symbol side division is not formal, and there are a
number of exceptions. For instance, core file support involves symbolic
elements (the basic core file reader is in BFD) and target elements (it
supplies the contents of memory and the values of registers). Instead,
this division is useful for understanding how the minor subsystems
should fit together.
The Symbol Side
===============
The symbolic side of GDB can be thought of as "everything you can do
in GDB without having a live program running". For instance, you can
look at the types of variables, and evaluate many kinds of expressions.
The Target Side
===============
The target side of GDB is the "bits and bytes manipulator".
Although it may make reference to symbolic info here and there, most of
the target side will run with only a stripped executable available--or
even no executable at all, in remote debugging cases.
Operations such as disassembly, stack frame crawls, and register
display, are able to work with no symbolic info at all. In some cases,
such as disassembly, GDB will use symbolic info to present addresses
relative to symbols rather than as raw numbers, but it will work either
way.
Configurations
==============
"Host" refers to attributes of the system where GDB runs. "Target"
refers to the system where the program being debugged executes. In
most cases they are the same machine, in which case a third type of
"Native" attributes come into play.
Defines and include files needed to build on the host are host
support. Examples are tty support, system defined types, host byte
order, host float format.
Defines and information needed to handle the target format are target
dependent. Examples are the stack frame format, instruction set,
breakpoint instruction, registers, and how to set up and tear down the
stack to call a function.
Information that is only needed when the host and target are the
same, is native dependent. One example is Unix child process support;
if the host and target are not the same, doing a fork to start the
target process is a bad idea. The various macros needed for finding the
registers in the `upage', running `ptrace', and such are all in the
native-dependent files.
Another example of native-dependent code is support for features that
are really part of the target environment, but which require `#include'
files that are only available on the host system. Core file handling
and `setjmp' handling are two common cases.
When you want to make GDB work "native" on a particular machine, you
have to include all three kinds of information.
File: gdbint.info, Node: Algorithms, Next: User Interface, Prev: Overall Structure, Up: Top
Algorithms
**********
GDB uses a number of debugging-specific algorithms. They are often
not very complicated, but get lost in the thicket of special cases and
real-world issues. This chapter describes the basic algorithms and
mentions some of the specific target definitions that they use.
Frames
======
A frame is a construct that GDB uses to keep track of calling and
called functions.
`FRAME_FP' in the machine description has no meaning to the
machine-independent part of GDB, except that it is used when setting up
a new frame from scratch, as follows:
create_new_frame (read_register (FP_REGNUM), read_pc ()));
Other than that, all the meaning imparted to `FP_REGNUM' is imparted
by the machine-dependent code. So, `FP_REGNUM' can have any value that
is convenient for the code that creates new frames.
(`create_new_frame' calls `INIT_EXTRA_FRAME_INFO' if it is defined;
that is where you should use the `FP_REGNUM' value, if your frames are
nonstandard.)
Given a GDB frame, define `FRAME_CHAIN' to determine the address of
the calling function's frame. This will be used to create a new GDB
frame struct, and then `INIT_EXTRA_FRAME_INFO' and `INIT_FRAME_PC' will
be called for the new frame.
Breakpoint Handling
===================
In general, a breakpoint is a user-designated location in the program
where the user wants to regain control if program execution ever reaches
that location.
There are two main ways to implement breakpoints; either as
"hardware" breakpoints or as "software" breakpoints.
Hardware breakpoints are sometimes available as a builtin debugging
features with some chips. Typically these work by having dedicated
register into which the breakpoint address may be stored. If the PC
(shorthand for "program counter") ever matches a value in a breakpoint
registers, the CPU raises an exception and reports it to GDB.
Another possibility is when an emulator is in use; many emulators
include circuitry that watches the address lines coming out from the
processor, and force it to stop if the address matches a breakpoint's
address.
A third possibility is that the target already has the ability to do
breakpoints somehow; for instance, a ROM monitor may do its own
software breakpoints. So although these are not literally "hardware
breakpoints", from GDB's point of view they work the same; GDB need not
do nothing more than set the breakpoint and wait for something to
happen.
Since they depend on hardware resources, hardware breakpoints may be
limited in number; when the user asks for more, GDB will start trying
to set software breakpoints. (On some architectures, notably the
32-bit x86 platforms, GDB cannot always know whether there's enough
hardware resources to insert all the hardware breakpoints and
watchpoints. On those platforms, GDB prints an error message only when
the program being debugged is continued.)
Software breakpoints require GDB to do somewhat more work. The
basic theory is that GDB will replace a program instruction with a
trap, illegal divide, or some other instruction that will cause an
exception, and then when it's encountered, GDB will take the exception
and stop the program. When the user says to continue, GDB will restore
the original instruction, single-step, re-insert the trap, and continue
on.
Since it literally overwrites the program being tested, the program
area must be writable, so this technique won't work on programs in ROM.
It can also distort the behavior of programs that examine themselves,
although such a situation would be highly unusual.
Also, the software breakpoint instruction should be the smallest
size of instruction, so it doesn't overwrite an instruction that might
be a jump target, and cause disaster when the program jumps into the
middle of the breakpoint instruction. (Strictly speaking, the
breakpoint must be no larger than the smallest interval between
instructions that may be jump targets; perhaps there is an architecture
where only even-numbered instructions may jumped to.) Note that it's
possible for an instruction set not to have any instructions usable for
a software breakpoint, although in practice only the ARC has failed to
define such an instruction.
The basic definition of the software breakpoint is the macro
`BREAKPOINT'.
Basic breakpoint object handling is in `breakpoint.c'. However,
much of the interesting breakpoint action is in `infrun.c'.
Single Stepping
===============
Signal Handling
===============
Thread Handling
===============
Inferior Function Calls
=======================
Longjmp Support
===============
GDB has support for figuring out that the target is doing a
`longjmp' and for stopping at the target of the jump, if we are
stepping. This is done with a few specialized internal breakpoints,
which are visible in the output of the `maint info breakpoint' command.
To make this work, you need to define a macro called
`GET_LONGJMP_TARGET', which will examine the `jmp_buf' structure and
extract the longjmp target address. Since `jmp_buf' is target
specific, you will need to define it in the appropriate `tm-TARGET.h'
file. Look in `tm-sun4os4.h' and `sparc-tdep.c' for examples of how to
do this.
Watchpoints
===========
Watchpoints are a special kind of breakpoints (*note breakpoints:
Algorithms.) which break when data is accessed rather than when some
instruction is executed. When you have data which changes without your
knowing what code does that, watchpoints are the silver bullet to hunt
down and kill such bugs.
Watchpoints can be either hardware-assisted or not; the latter type
is known as "software watchpoints." GDB always uses hardware-assisted
watchpoints if they are available, and falls back on software
watchpoints otherwise. Typical situations where GDB will use software
watchpoints are:
* The watched memory region is too large for the underlying hardware
watchpoint support. For example, each x86 debug register can
watch up to 4 bytes of memory, so trying to watch data structures
whose size is more than 16 bytes will cause GDB to use software
watchpoints.
* The value of the expression to be watched depends on data held in
registers (as opposed to memory).
* Too many different watchpoints requested. (On some architectures,
this situation is impossible to detect until the debugged program
is resumed.) Note that x86 debug registers are used both for
hardware breakpoints and for watchpoints, so setting too many
hardware breakpoints might cause watchpoint insertion to fail.
* No hardware-assisted watchpoints provided by the target
implementation.
Software watchpoints are very slow, since GDB needs to single-step
the program being debugged and test the value of the watched
expression(s) after each instruction. The rest of this section is
mostly irrelevant for software watchpoints.
GDB uses several macros and primitives to support hardware
watchpoints:
`TARGET_HAS_HARDWARE_WATCHPOINTS'
If defined, the target supports hardware watchpoints.
`TARGET_CAN_USE_HARDWARE_WATCHPOINT (TYPE, COUNT, OTHER)'
Return the number of hardware watchpoints of type TYPE that are
possible to be set. The value is positive if COUNT watchpoints of
this type can be set, zero if setting watchpoints of this type is
not supported, and negative if COUNT is more than the maximum
number of watchpoints of type TYPE that can be set. OTHER is
non-zero if other types of watchpoints are currently enabled (there
are architectures which cannot set watchpoints of different types
at the same time).
`TARGET_REGION_OK_FOR_HW_WATCHPOINT (ADDR, LEN)'
Return non-zero if hardware watchpoints can be used to watch a
region whose address is ADDR and whose length in bytes is LEN.
`TARGET_REGION_SIZE_OK_FOR_HW_WATCHPOINT (SIZE)'
Return non-zero if hardware watchpoints can be used to watch a
region whose size is SIZE. GDB only uses this macro as a
fall-back, in case `TARGET_REGION_OK_FOR_HW_WATCHPOINT' is not
defined.
`TARGET_DISABLE_HW_WATCHPOINTS (PID)'
Disables watchpoints in the process identified by PID. This is
used, e.g., on HP-UX which provides operations to disable and
enable the page-level memory protection that implements hardware
watchpoints on that platform.
`TARGET_ENABLE_HW_WATCHPOINTS (PID)'
Enables watchpoints in the process identified by PID. This is
used, e.g., on HP-UX which provides operations to disable and
enable the page-level memory protection that implements hardware
watchpoints on that platform.
`target_insert_watchpoint (ADDR, LEN, TYPE)'
`target_remove_watchpoint (ADDR, LEN, TYPE)'
Insert or remove a hardware watchpoint starting at ADDR, for LEN
bytes. TYPE is the watchpoint type, one of the possible values of
the enumerated data type `target_hw_bp_type', defined by
`breakpoint.h' as follows:
enum target_hw_bp_type
{
hw_write = 0, /* Common (write) HW watchpoint */
hw_read = 1, /* Read HW watchpoint */
hw_access = 2, /* Access (read or write) HW watchpoint */
hw_execute = 3 /* Execute HW breakpoint */
};
These two macros should return 0 for success, non-zero for failure.
`target_remove_hw_breakpoint (ADDR, SHADOW)'
`target_insert_hw_breakpoint (ADDR, SHADOW)'
Insert or remove a hardware-assisted breakpoint at address ADDR.
Returns zero for success, non-zero for failure. SHADOW is the
real contents of the byte where the breakpoint has been inserted;
it is generally not valid when hardware breakpoints are used, but
since no other code touches these values, the implementations of
the above two macros can use them for their internal purposes.
`target_stopped_data_address ()'
If the inferior has some watchpoint that triggered, return the
address associated with that watchpoint. Otherwise, return zero.
`DECR_PC_AFTER_HW_BREAK'
If defined, GDB decrements the program counter by the value of
`DECR_PC_AFTER_HW_BREAK' after a hardware break-point. This
overrides the value of `DECR_PC_AFTER_BREAK' when a breakpoint
that breaks is a hardware-assisted breakpoint.
`HAVE_STEPPABLE_WATCHPOINT'
If defined to a non-zero value, it is not necessary to disable a
watchpoint to step over it.
`HAVE_NONSTEPPABLE_WATCHPOINT'
If defined to a non-zero value, GDB should disable a watchpoint to
step the inferior over it.
`HAVE_CONTINUABLE_WATCHPOINT'
If defined to a non-zero value, it is possible to continue the
inferior after a watchpoint has been hit.
`CANNOT_STEP_HW_WATCHPOINTS'
If this is defined to a non-zero value, GDB will remove all
watchpoints before stepping the inferior.
`STOPPED_BY_WATCHPOINT (WAIT_STATUS)'
Return non-zero if stopped by a watchpoint. WAIT_STATUS is of the
type `struct target_waitstatus', defined by `target.h'.
x86 Watchpoints
---------------
The 32-bit Intel x86 (a.k.a. ia32) processors feature special debug
registers designed to facilitate debugging. GDB provides a generic
library of functions that x86-based ports can use to implement support
for watchpoints and hardware-assisted breakpoints. This subsection
documents the x86 watchpoint facilities in GDB.
To use the generic x86 watchpoint support, a port should do the
following:
* Define the macro `I386_USE_GENERIC_WATCHPOINTS' somewhere in the
target-dependent headers.
* Include the `config/i386/nm-i386.h' header file _after_ defining
`I386_USE_GENERIC_WATCHPOINTS'.
* Add `i386-nat.o' to the value of the Make variable `NATDEPFILES'
(*note NATDEPFILES: Native Debugging.) or `TDEPFILES' (*note
TDEPFILES: Target Architecture Definition.).
* Provide implementations for the `I386_DR_LOW_*' macros described
below. Typically, each macro should call a target-specific
function which does the real work.
The x86 watchpoint support works by maintaining mirror images of the
debug registers. Values are copied between the mirror images and the
real debug registers via a set of macros which each target needs to
provide:
`I386_DR_LOW_SET_CONTROL (VAL)'
Set the Debug Control (DR7) register to the value VAL.
`I386_DR_LOW_SET_ADDR (IDX, ADDR)'
Put the address ADDR into the debug register number IDX.
`I386_DR_LOW_RESET_ADDR (IDX)'
Reset (i.e. zero out) the address stored in the debug register
number IDX.
`I386_DR_LOW_GET_STATUS'
Return the value of the Debug Status (DR6) register. This value is
used immediately after it is returned by `I386_DR_LOW_GET_STATUS',
so as to support per-thread status register values.
For each one of the 4 debug registers (whose indices are from 0 to 3)
that store addresses, a reference count is maintained by GDB, to allow
sharing of debug registers by several watchpoints. This allows users
to define several watchpoints that watch the same expression, but with
different conditions and/or commands, without wasting debug registers
which are in short supply. GDB maintains the reference counts
internally, targets don't have to do anything to use this feature.
The x86 debug registers can each watch a region that is 1, 2, or 4
bytes long. The ia32 architecture requires that each watched region be
appropriately aligned: 2-byte region on 2-byte boundary, 4-byte region
on 4-byte boundary. However, the x86 watchpoint support in GDB can
watch unaligned regions and regions larger than 4 bytes (up to 16
bytes) by allocating several debug registers to watch a single region.
This allocation of several registers per a watched region is also done
automatically without target code intervention.
The generic x86 watchpoint support provides the following API for the
GDB's application code:
`i386_region_ok_for_watchpoint (ADDR, LEN)'
The macro `TARGET_REGION_OK_FOR_HW_WATCHPOINT' is set to call this
function. It counts the number of debug registers required to
watch a given region, and returns a non-zero value if that number
is less than 4, the number of debug registers available to x86
processors.
`i386_stopped_data_address (void)'
The macros `STOPPED_BY_WATCHPOINT' and
`target_stopped_data_address' are set to call this function. The
argument passed to `STOPPED_BY_WATCHPOINT' is ignored. This
function examines the breakpoint condition bits in the DR6 Debug
Status register, as returned by the `I386_DR_LOW_GET_STATUS'
macro, and returns the address associated with the first bit that
is set in DR6.
`i386_insert_watchpoint (ADDR, LEN, TYPE)'
`i386_remove_watchpoint (ADDR, LEN, TYPE)'
Insert or remove a watchpoint. The macros
`target_insert_watchpoint' and `target_remove_watchpoint' are set
to call these functions. `i386_insert_watchpoint' first looks for
a debug register which is already set to watch the same region for
the same access types; if found, it just increments the reference
count of that debug register, thus implementing debug register
sharing between watchpoints. If no such register is found, the
function looks for a vacant debug register, sets its mirrored
value to ADDR, sets the mirrored value of DR7 Debug Control
register as appropriate for the LEN and TYPE parameters, and then
passes the new values of the debug register and DR7 to the
inferior by calling `I386_DR_LOW_SET_ADDR' and
`I386_DR_LOW_SET_CONTROL'. If more than one debug register is
required to cover the given region, the above process is repeated
for each debug register.
`i386_remove_watchpoint' does the opposite: it resets the address
in the mirrored value of the debug register and its read/write and
length bits in the mirrored value of DR7, then passes these new
values to the inferior via `I386_DR_LOW_RESET_ADDR' and
`I386_DR_LOW_SET_CONTROL'. If a register is shared by several
watchpoints, each time a `i386_remove_watchpoint' is called, it
decrements the reference count, and only calls
`I386_DR_LOW_RESET_ADDR' and `I386_DR_LOW_SET_CONTROL' when the
count goes to zero.
`i386_insert_hw_breakpoint (ADDR, SHADOW'
`i386_remove_hw_breakpoint (ADDR, SHADOW)'
These functions insert and remove hardware-assisted breakpoints.
The macros `target_insert_hw_breakpoint' and
`target_remove_hw_breakpoint' are set to call these functions.
These functions work like `i386_insert_watchpoint' and
`i386_remove_watchpoint', respectively, except that they set up
the debug registers to watch instruction execution, and each
hardware-assisted breakpoint always requires exactly one debug
register.
`i386_stopped_by_hwbp (void)'
This function returns non-zero if the inferior has some watchpoint
or hardware breakpoint that triggered. It works like
`i386_stopped_data_address', except that it doesn't return the
address whose watchpoint triggered.
`i386_cleanup_dregs (void)'
This function clears all the reference counts, addresses, and
control bits in the mirror images of the debug registers. It
doesn't affect the actual debug registers in the inferior process.
*Notes:*
1. x86 processors support setting watchpoints on I/O reads or writes.
However, since no target supports this (as of March 2001), and
since `enum target_hw_bp_type' doesn't even have an enumeration
for I/O watchpoints, this feature is not yet available to GDB
running on x86.
2. x86 processors can enable watchpoints locally, for the current task
only, or globally, for all the tasks. For each debug register,
there's a bit in the DR7 Debug Control register that determines
whether the associated address is watched locally or globally. The
current implementation of x86 watchpoint support in GDB always
sets watchpoints to be locally enabled, since global watchpoints
might interfere with the underlying OS and are probably
unavailable in many platforms.
File: gdbint.info, Node: User Interface, Next: libgdb, Prev: Algorithms, Up: Top
User Interface
**************
GDB has several user interfaces. Although the command-line interface
is the most common and most familiar, there are others.
Command Interpreter
===================
The command interpreter in GDB is fairly simple. It is designed to
allow for the set of commands to be augmented dynamically, and also has
a recursive subcommand capability, where the first argument to a
command may itself direct a lookup on a different command list.
For instance, the `set' command just starts a lookup on the
`setlist' command list, while `set thread' recurses to the
`set_thread_cmd_list'.
To add commands in general, use `add_cmd'. `add_com' adds to the
main command list, and should be used for those commands. The usual
place to add commands is in the `_initialize_XYZ' routines at the ends
of most source files.
To add paired `set' and `show' commands, use `add_setshow_cmd' or
`add_setshow_cmd_full'. The former is a slightly simpler interface
which is useful when you don't need to further modify the new command
structures, while the latter returns the new command structures for
manipulation.
Before removing commands from the command set it is a good idea to
deprecate them for some time. Use `deprecate_cmd' on commands or
aliases to set the deprecated flag. `deprecate_cmd' takes a `struct
cmd_list_element' as it's first argument. You can use the return value
from `add_com' or `add_cmd' to deprecate the command immediately after
it is created.
The first time a command is used the user will be warned and offered
a replacement (if one exists). Note that the replacement string passed
to `deprecate_cmd' should be the full name of the command, i.e. the
entire string the user should type at the command line.
UI-Independent Output--the `ui_out' Functions
=============================================
The `ui_out' functions present an abstraction level for the GDB
output code. They hide the specifics of different user interfaces
supported by GDB, and thus free the programmer from the need to write
several versions of the same code, one each for every UI, to produce
output.
Overview and Terminology
------------------------
In general, execution of each GDB command produces some sort of
output, and can even generate an input request.
Output can be generated for the following purposes:
* to display a _result_ of an operation;
* to convey _info_ or produce side-effects of a requested operation;
* to provide a _notification_ of an asynchronous event (including
progress indication of a prolonged asynchronous operation);
* to display _error messages_ (including warnings);
* to show _debug data_;
* to _query_ or prompt a user for input (a special case).
This section mainly concentrates on how to build result output,
although some of it also applies to other kinds of output.
Generation of output that displays the results of an operation
involves one or more of the following:
* output of the actual data
* formatting the output as appropriate for console output, to make it
easily readable by humans
* machine oriented formatting-a more terse formatting to allow for
easy parsing by programs which read GDB's output
* annotation, whose purpose is to help legacy GUIs to identify
interesting parts in the output
The `ui_out' routines take care of the first three aspects.
Annotations are provided by separate annotation routines. Note that use
of annotations for an interface between a GUI and GDB is deprecated.
Output can be in the form of a single item, which we call a "field";
a "list" consisting of identical fields; a "tuple" consisting of
non-identical fields; or a "table", which is a tuple consisting of a
header and a body. In a BNF-like form:
`<table> ==>'
`<header> <body>'
`<header> ==>'
`{ <column> }'
`<column> ==>'
`<width> <alignment> <title>'
`<body> ==>'
`{<row>}'
General Conventions
-------------------
Most `ui_out' routines are of type `void', the exceptions are
`ui_out_stream_new' (which returns a pointer to the newly created
object) and the `make_cleanup' routines.
The first parameter is always the `ui_out' vector object, a pointer
to a `struct ui_out'.
The FORMAT parameter is like in `printf' family of functions. When
it is present, there must also be a variable list of arguments
sufficient used to satisfy the `%' specifiers in the supplied format.
When a character string argument is not used in a `ui_out' function
call, a `NULL' pointer has to be supplied instead.
Table, Tuple and List Functions
-------------------------------
This section introduces `ui_out' routines for building lists, tuples
and tables. The routines to output the actual data items (fields) are
presented in the next section.
To recap: A "tuple" is a sequence of "fields", each field containing
information about an object; a "list" is a sequence of fields where
each field describes an identical object.
Use the "table" functions when your output consists of a list of
rows (tuples) and the console output should include a heading. Use this
even when you are listing just one object but you still want the header.
Tables can not be nested. Tuples and lists can be nested up to a
maximum of five levels.
The overall structure of the table output code is something like
this:
ui_out_table_begin
ui_out_table_header
...
ui_out_table_body
ui_out_tuple_begin
ui_out_field_*
...
ui_out_tuple_end
...
ui_out_table_end
Here is the description of table-, tuple- and list-related `ui_out'
functions:
- Function: void ui_out_table_begin (struct ui_out *UIOUT, int
NBROFCOLS, int NR_ROWS, const char *TBLID)
The function `ui_out_table_begin' marks the beginning of the output
of a table. It should always be called before any other `ui_out'
function for a given table. NBROFCOLS is the number of columns in
the table. NR_ROWS is the number of rows in the table. TBLID is
an optional string identifying the table. The string pointed to
by TBLID is copied by the implementation of `ui_out_table_begin',
so the application can free the string if it was `malloc'ed.
The companion function `ui_out_table_end', described below, marks
the end of the table's output.
- Function: void ui_out_table_header (struct ui_out *UIOUT, int WIDTH,
enum ui_align ALIGNMENT, const char *COLHDR)
`ui_out_table_header' provides the header information for a single
table column. You call this function several times, one each for
every column of the table, after `ui_out_table_begin', but before
`ui_out_table_body'.
The value of WIDTH gives the column width in characters. The
value of ALIGNMENT is one of `left', `center', and `right', and it
specifies how to align the header: left-justify, center, or
right-justify it. COLHDR points to a string that specifies the
column header; the implementation copies that string, so column
header strings in `malloc'ed storage can be freed after the call.
- Function: void ui_out_table_body (struct ui_out *UIOUT)
This function delimits the table header from the table body.
- Function: void ui_out_table_end (struct ui_out *UIOUT)
This function signals the end of a table's output. It should be
called after the table body has been produced by the list and
field output functions.
There should be exactly one call to `ui_out_table_end' for each
call to `ui_out_table_begin', otherwise the `ui_out' functions
will signal an internal error.
The output of the tuples that represent the table rows must follow
the call to `ui_out_table_body' and precede the call to
`ui_out_table_end'. You build a tuple by calling `ui_out_tuple_begin'
and `ui_out_tuple_end', with suitable calls to functions which actually
output fields between them.
- Function: void ui_out_tuple_begin (struct ui_out *UIOUT, const char
*ID)
This function marks the beginning of a tuple output. ID points to
an optional string that identifies the tuple; it is copied by the
implementation, and so strings in `malloc'ed storage can be freed
after the call.
- Function: void ui_out_tuple_end (struct ui_out *UIOUT)
This function signals an end of a tuple output. There should be
exactly one call to `ui_out_tuple_end' for each call to
`ui_out_tuple_begin', otherwise an internal GDB error will be
signaled.
- Function: struct cleanup *make_cleanup_ui_out_tuple_begin_end
(struct ui_out *UIOUT, const char *ID)
This function first opens the tuple and then establishes a cleanup
(*note Cleanups: Coding.) to close the tuple. It provides a
convenient and correct implementation of the non-portable(1) code
sequence:
struct cleanup *old_cleanup;
ui_out_tuple_begin (uiout, "...");
old_cleanup = make_cleanup ((void(*)(void *)) ui_out_tuple_end,
uiout);
- Function: void ui_out_list_begin (struct ui_out *UIOUT, const char
*ID)
This function marks the beginning of a list output. ID points to
an optional string that identifies the list; it is copied by the
implementation, and so strings in `malloc'ed storage can be freed
after the call.
- Function: void ui_out_list_end (struct ui_out *UIOUT)
This function signals an end of a list output. There should be
exactly one call to `ui_out_list_end' for each call to
`ui_out_list_begin', otherwise an internal GDB error will be
signaled.
- Function: struct cleanup *make_cleanup_ui_out_list_begin_end (struct
ui_out *UIOUT, const char *ID)
Similar to `make_cleanup_ui_out_tuple_begin_end', this function
opens a list and then establishes cleanup (*note Cleanups: Coding.)
that will close the list.list.
Item Output Functions
---------------------
The functions described below produce output for the actual data
items, or fields, which contain information about the object.
Choose the appropriate function accordingly to your particular needs.
- Function: void ui_out_field_fmt (struct ui_out *UIOUT, char
*FLDNAME, char *FORMAT, ...)
This is the most general output function. It produces the
representation of the data in the variable-length argument list
according to formatting specifications in FORMAT, a `printf'-like
format string. The optional argument FLDNAME supplies the name of
the field. The data items themselves are supplied as additional
arguments after FORMAT.
This generic function should be used only when it is not possible
to use one of the specialized versions (see below).
- Function: void ui_out_field_int (struct ui_out *UIOUT, const char
*FLDNAME, int VALUE)
This function outputs a value of an `int' variable. It uses the
`"%d"' output conversion specification. FLDNAME specifies the
name of the field.
- Function: void ui_out_field_core_addr (struct ui_out *UIOUT, const
char *FLDNAME, CORE_ADDR ADDRESS)
This function outputs an address.
- Function: void ui_out_field_string (struct ui_out *UIOUT, const char
*FLDNAME, const char *STRING)
This function outputs a string using the `"%s"' conversion
specification.
Sometimes, there's a need to compose your output piece by piece using
functions that operate on a stream, such as `value_print' or
`fprintf_symbol_filtered'. These functions accept an argument of the
type `struct ui_file *', a pointer to a `ui_file' object used to store
the data stream used for the output. When you use one of these
functions, you need a way to pass their results stored in a `ui_file'
object to the `ui_out' functions. To this end, you first create a
`ui_stream' object by calling `ui_out_stream_new', pass the `stream'
member of that `ui_stream' object to `value_print' and similar
functions, and finally call `ui_out_field_stream' to output the field
you constructed. When the `ui_stream' object is no longer needed, you
should destroy it and free its memory by calling `ui_out_stream_delete'.
- Function: struct ui_stream *ui_out_stream_new (struct ui_out *UIOUT)
This function creates a new `ui_stream' object which uses the same
output methods as the `ui_out' object whose pointer is passed in
UIOUT. It returns a pointer to the newly created `ui_stream'
object.
- Function: void ui_out_stream_delete (struct ui_stream *STREAMBUF)
This functions destroys a `ui_stream' object specified by
STREAMBUF.
- Function: void ui_out_field_stream (struct ui_out *UIOUT, const char
*FIELDNAME, struct ui_stream *STREAMBUF)
This function consumes all the data accumulated in
`streambuf->stream' and outputs it like `ui_out_field_string'
does. After a call to `ui_out_field_stream', the accumulated data
no longer exists, but the stream is still valid and may be used
for producing more fields.
*Important:* If there is any chance that your code could bail out
before completing output generation and reaching the point where
`ui_out_stream_delete' is called, it is necessary to set up a cleanup,
to avoid leaking memory and other resources. Here's a skeleton code to
do that:
struct ui_stream *mybuf = ui_out_stream_new (uiout);
struct cleanup *old = make_cleanup (ui_out_stream_delete, mybuf);
...
do_cleanups (old);
If the function already has the old cleanup chain set (for other
kinds of cleanups), you just have to add your cleanup to it:
mybuf = ui_out_stream_new (uiout);
make_cleanup (ui_out_stream_delete, mybuf);
Note that with cleanups in place, you should not call
`ui_out_stream_delete' directly, or you would attempt to free the same
buffer twice.
Utility Output Functions
------------------------
- Function: void ui_out_field_skip (struct ui_out *UIOUT, const char
*FLDNAME)
This function skips a field in a table. Use it if you have to
leave an empty field without disrupting the table alignment. The
argument FLDNAME specifies a name for the (missing) filed.
- Function: void ui_out_text (struct ui_out *UIOUT, const char *STRING)
This function outputs the text in STRING in a way that makes it
easy to be read by humans. For example, the console
implementation of this method filters the text through a built-in
pager, to prevent it from scrolling off the visible portion of the
screen.
Use this function for printing relatively long chunks of text
around the actual field data: the text it produces is not aligned
according to the table's format. Use `ui_out_field_string' to
output a string field, and use `ui_out_message', described below,
to output short messages.
- Function: void ui_out_spaces (struct ui_out *UIOUT, int NSPACES)
This function outputs NSPACES spaces. It is handy to align the
text produced by `ui_out_text' with the rest of the table or list.
- Function: void ui_out_message (struct ui_out *UIOUT, int VERBOSITY,
const char *FORMAT, ...)
This function produces a formatted message, provided that the
current verbosity level is at least as large as given by
VERBOSITY. The current verbosity level is specified by the user
with the `set verbositylevel' command.(2)
- Function: void ui_out_wrap_hint (struct ui_out *UIOUT, char *INDENT)
This function gives the console output filter (a paging filter) a
hint of where to break lines which are too long. Ignored for all
other output consumers. INDENT, if non-`NULL', is the string to
be printed to indent the wrapped text on the next line; it must
remain accessible until the next call to `ui_out_wrap_hint', or
until an explicit newline is produced by one of the other
functions. If INDENT is `NULL', the wrapped text will not be
indented.
- Function: void ui_out_flush (struct ui_out *UIOUT)
This function flushes whatever output has been accumulated so far,
if the UI buffers output.
Examples of Use of `ui_out' functions
-------------------------------------
This section gives some practical examples of using the `ui_out'
functions to generalize the old console-oriented code in GDB. The
examples all come from functions defined on the `breakpoints.c' file.
This example, from the `breakpoint_1' function, shows how to produce
a table.
The original code was:
if (!found_a_breakpoint++)
{
annotate_breakpoints_headers ();
annotate_field (0);
printf_filtered ("Num ");
annotate_field (1);
printf_filtered ("Type ");
annotate_field (2);
printf_filtered ("Disp ");
annotate_field (3);
printf_filtered ("Enb ");
if (addressprint)
{
annotate_field (4);
printf_filtered ("Address ");
}
annotate_field (5);
printf_filtered ("What\n");
annotate_breakpoints_table ();
}
Here's the new version:
nr_printable_breakpoints = ...;
if (addressprint)
ui_out_table_begin (ui, 6, nr_printable_breakpoints, "BreakpointTable");
else
ui_out_table_begin (ui, 5, nr_printable_breakpoints, "BreakpointTable");
if (nr_printable_breakpoints > 0)
annotate_breakpoints_headers ();
if (nr_printable_breakpoints > 0)
annotate_field (0);
ui_out_table_header (uiout, 3, ui_left, "number", "Num"); /* 1 */
if (nr_printable_breakpoints > 0)
annotate_field (1);
ui_out_table_header (uiout, 14, ui_left, "type", "Type"); /* 2 */
if (nr_printable_breakpoints > 0)
annotate_field (2);
ui_out_table_header (uiout, 4, ui_left, "disp", "Disp"); /* 3 */
if (nr_printable_breakpoints > 0)
annotate_field (3);
ui_out_table_header (uiout, 3, ui_left, "enabled", "Enb"); /* 4 */
if (addressprint)
{
if (nr_printable_breakpoints > 0)
annotate_field (4);
if (TARGET_ADDR_BIT <= 32)
ui_out_table_header (uiout, 10, ui_left, "addr", "Address");/* 5 */
else
ui_out_table_header (uiout, 18, ui_left, "addr", "Address");/* 5 */
}
if (nr_printable_breakpoints > 0)
annotate_field (5);
ui_out_table_header (uiout, 40, ui_noalign, "what", "What"); /* 6 */
ui_out_table_body (uiout);
if (nr_printable_breakpoints > 0)
annotate_breakpoints_table ();
This example, from the `print_one_breakpoint' function, shows how to
produce the actual data for the table whose structure was defined in
the above example. The original code was:
annotate_record ();
annotate_field (0);
printf_filtered ("%-3d ", b->number);
annotate_field (1);
if ((int)b->type > (sizeof(bptypes)/sizeof(bptypes[0]))
|| ((int) b->type != bptypes[(int) b->type].type))
internal_error ("bptypes table does not describe type #%d.",
(int)b->type);
printf_filtered ("%-14s ", bptypes[(int)b->type].description);
annotate_field (2);
printf_filtered ("%-4s ", bpdisps[(int)b->disposition]);
annotate_field (3);
printf_filtered ("%-3c ", bpenables[(int)b->enable]);
...
This is the new version:
annotate_record ();
ui_out_tuple_begin (uiout, "bkpt");
annotate_field (0);
ui_out_field_int (uiout, "number", b->number);
annotate_field (1);
if (((int) b->type > (sizeof (bptypes) / sizeof (bptypes[0])))
|| ((int) b->type != bptypes[(int) b->type].type))
internal_error ("bptypes table does not describe type #%d.",
(int) b->type);
ui_out_field_string (uiout, "type", bptypes[(int)b->type].description);
annotate_field (2);
ui_out_field_string (uiout, "disp", bpdisps[(int)b->disposition]);
annotate_field (3);
ui_out_field_fmt (uiout, "enabled", "%c", bpenables[(int)b->enable]);
...
This example, also from `print_one_breakpoint', shows how to produce
a complicated output field using the `print_expression' functions which
requires a stream to be passed. It also shows how to automate stream
destruction with cleanups. The original code was:
annotate_field (5);
print_expression (b->exp, gdb_stdout);
The new version is:
struct ui_stream *stb = ui_out_stream_new (uiout);
struct cleanup *old_chain = make_cleanup_ui_out_stream_delete (stb);
...
annotate_field (5);
print_expression (b->exp, stb->stream);
ui_out_field_stream (uiout, "what", local_stream);
This example, also from `print_one_breakpoint', shows how to use
`ui_out_text' and `ui_out_field_string'. The original code was:
annotate_field (5);
if (b->dll_pathname == NULL)
printf_filtered ("<any library> ");
else
printf_filtered ("library \"%s\" ", b->dll_pathname);
It became:
annotate_field (5);
if (b->dll_pathname == NULL)
{
ui_out_field_string (uiout, "what", "<any library>");
ui_out_spaces (uiout, 1);
}
else
{
ui_out_text (uiout, "library \"");
ui_out_field_string (uiout, "what", b->dll_pathname);
ui_out_text (uiout, "\" ");
}
The following example from `print_one_breakpoint' shows how to use
`ui_out_field_int' and `ui_out_spaces'. The original code was:
annotate_field (5);
if (b->forked_inferior_pid != 0)
printf_filtered ("process %d ", b->forked_inferior_pid);
It became:
annotate_field (5);
if (b->forked_inferior_pid != 0)
{
ui_out_text (uiout, "process ");
ui_out_field_int (uiout, "what", b->forked_inferior_pid);
ui_out_spaces (uiout, 1);
}
Here's an example of using `ui_out_field_string'. The original code
was:
annotate_field (5);
if (b->exec_pathname != NULL)
printf_filtered ("program \"%s\" ", b->exec_pathname);
It became:
annotate_field (5);
if (b->exec_pathname != NULL)
{
ui_out_text (uiout, "program \"");
ui_out_field_string (uiout, "what", b->exec_pathname);
ui_out_text (uiout, "\" ");
}
Finally, here's an example of printing an address. The original
code:
annotate_field (4);
printf_filtered ("%s ",
local_hex_string_custom ((unsigned long) b->address, "08l"));
It became:
annotate_field (4);
ui_out_field_core_addr (uiout, "Address", b->address);
Console Printing
================
TUI
===
---------- Footnotes ----------
(1) The function cast is not portable ISO C.
(2) As of this writing (April 2001), setting verbosity level is not
yet implemented, and is always returned as zero. So calling
`ui_out_message' with a VERBOSITY argument more than zero will cause
the message to never be printed.
Go to most recent revision | Compare with Previous | Blame | View Log