URL
https://opencores.org/ocsvn/or1k/or1k/trunk
Subversion Repositories or1k
[/] [or1k/] [trunk/] [gdb-5.3/] [gdb/] [solib-sunos.c] - Rev 1773
Go to most recent revision | Compare with Previous | Blame | View Log
/* Handle SunOS shared libraries for GDB, the GNU Debugger. Copyright 1990, 1991, 1992, 1993, 1994, 1995, 1996, 1998, 1999, 2000, 2001 Free Software Foundation, Inc. This file is part of GDB. This program is free software; you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free Software Foundation; either version 2 of the License, or (at your option) any later version. This program is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for more details. You should have received a copy of the GNU General Public License along with this program; if not, write to the Free Software Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. */ #include "defs.h" #include <sys/types.h> #include <signal.h> #include "gdb_string.h" #include <sys/param.h> #include <fcntl.h> /* SunOS shared libs need the nlist structure. */ #include <a.out.h> #include <link.h> #include "symtab.h" #include "bfd.h" #include "symfile.h" #include "objfiles.h" #include "gdbcore.h" #include "inferior.h" #include "solist.h" /* Link map info to include in an allocated so_list entry */ struct lm_info { /* Pointer to copy of link map from inferior. The type is char * rather than void *, so that we may use byte offsets to find the various fields without the need for a cast. */ char *lm; }; /* Symbols which are used to locate the base of the link map structures. */ static char *debug_base_symbols[] = { "_DYNAMIC", "_DYNAMIC__MGC", NULL }; static char *main_name_list[] = { "main_$main", NULL }; /* Macro to extract an address from a solib structure. When GDB is configured for some 32-bit targets (e.g. Solaris 2.7 sparc), BFD is configured to handle 64-bit targets, so CORE_ADDR is 64 bits. We have to extract only the significant bits of addresses to get the right address when accessing the core file BFD. */ #define SOLIB_EXTRACT_ADDRESS(MEMBER) \ extract_address (&(MEMBER), sizeof (MEMBER)) /* local data declarations */ static struct link_dynamic dynamic_copy; static struct link_dynamic_2 ld_2_copy; static struct ld_debug debug_copy; static CORE_ADDR debug_addr; static CORE_ADDR flag_addr; #ifndef offsetof #define offsetof(TYPE, MEMBER) ((unsigned long) &((TYPE *)0)->MEMBER) #endif #define fieldsize(TYPE, MEMBER) (sizeof (((TYPE *)0)->MEMBER)) /* link map access functions */ static CORE_ADDR LM_ADDR (struct so_list *so) { int lm_addr_offset = offsetof (struct link_map, lm_addr); int lm_addr_size = fieldsize (struct link_map, lm_addr); return (CORE_ADDR) extract_signed_integer (so->lm_info->lm + lm_addr_offset, lm_addr_size); } static CORE_ADDR LM_NEXT (struct so_list *so) { int lm_next_offset = offsetof (struct link_map, lm_next); int lm_next_size = fieldsize (struct link_map, lm_next); return extract_address (so->lm_info->lm + lm_next_offset, lm_next_size); } static CORE_ADDR LM_NAME (struct so_list *so) { int lm_name_offset = offsetof (struct link_map, lm_name); int lm_name_size = fieldsize (struct link_map, lm_name); return extract_address (so->lm_info->lm + lm_name_offset, lm_name_size); } static CORE_ADDR debug_base; /* Base of dynamic linker structures */ /* Local function prototypes */ static int match_main (char *); /* Allocate the runtime common object file. */ static void allocate_rt_common_objfile (void) { struct objfile *objfile; struct objfile *last_one; objfile = (struct objfile *) xmalloc (sizeof (struct objfile)); memset (objfile, 0, sizeof (struct objfile)); objfile->md = NULL; objfile->psymbol_cache = bcache_xmalloc (); objfile->macro_cache = bcache_xmalloc (); obstack_specify_allocation (&objfile->psymbol_obstack, 0, 0, xmalloc, xfree); obstack_specify_allocation (&objfile->symbol_obstack, 0, 0, xmalloc, xfree); obstack_specify_allocation (&objfile->type_obstack, 0, 0, xmalloc, xfree); objfile->name = mstrsave (objfile->md, "rt_common"); /* Add this file onto the tail of the linked list of other such files. */ objfile->next = NULL; if (object_files == NULL) object_files = objfile; else { for (last_one = object_files; last_one->next; last_one = last_one->next); last_one->next = objfile; } rt_common_objfile = objfile; } /* Read all dynamically loaded common symbol definitions from the inferior and put them into the minimal symbol table for the runtime common objfile. */ static void solib_add_common_symbols (CORE_ADDR rtc_symp) { struct rtc_symb inferior_rtc_symb; struct nlist inferior_rtc_nlist; int len; char *name; /* Remove any runtime common symbols from previous runs. */ if (rt_common_objfile != NULL && rt_common_objfile->minimal_symbol_count) { obstack_free (&rt_common_objfile->symbol_obstack, 0); obstack_specify_allocation (&rt_common_objfile->symbol_obstack, 0, 0, xmalloc, xfree); rt_common_objfile->minimal_symbol_count = 0; rt_common_objfile->msymbols = NULL; } init_minimal_symbol_collection (); make_cleanup_discard_minimal_symbols (); while (rtc_symp) { read_memory (rtc_symp, (char *) &inferior_rtc_symb, sizeof (inferior_rtc_symb)); read_memory (SOLIB_EXTRACT_ADDRESS (inferior_rtc_symb.rtc_sp), (char *) &inferior_rtc_nlist, sizeof (inferior_rtc_nlist)); if (inferior_rtc_nlist.n_type == N_COMM) { /* FIXME: The length of the symbol name is not available, but in the current implementation the common symbol is allocated immediately behind the name of the symbol. */ len = inferior_rtc_nlist.n_value - inferior_rtc_nlist.n_un.n_strx; name = xmalloc (len); read_memory (SOLIB_EXTRACT_ADDRESS (inferior_rtc_nlist.n_un.n_name), name, len); /* Allocate the runtime common objfile if necessary. */ if (rt_common_objfile == NULL) allocate_rt_common_objfile (); prim_record_minimal_symbol (name, inferior_rtc_nlist.n_value, mst_bss, rt_common_objfile); xfree (name); } rtc_symp = SOLIB_EXTRACT_ADDRESS (inferior_rtc_symb.rtc_next); } /* Install any minimal symbols that have been collected as the current minimal symbols for the runtime common objfile. */ install_minimal_symbols (rt_common_objfile); } /* LOCAL FUNCTION locate_base -- locate the base address of dynamic linker structs SYNOPSIS CORE_ADDR locate_base (void) DESCRIPTION For both the SunOS and SVR4 shared library implementations, if the inferior executable has been linked dynamically, there is a single address somewhere in the inferior's data space which is the key to locating all of the dynamic linker's runtime structures. This address is the value of the debug base symbol. The job of this function is to find and return that address, or to return 0 if there is no such address (the executable is statically linked for example). For SunOS, the job is almost trivial, since the dynamic linker and all of it's structures are statically linked to the executable at link time. Thus the symbol for the address we are looking for has already been added to the minimal symbol table for the executable's objfile at the time the symbol file's symbols were read, and all we have to do is look it up there. Note that we explicitly do NOT want to find the copies in the shared library. The SVR4 version is a bit more complicated because the address is contained somewhere in the dynamic info section. We have to go to a lot more work to discover the address of the debug base symbol. Because of this complexity, we cache the value we find and return that value on subsequent invocations. Note there is no copy in the executable symbol tables. */ static CORE_ADDR locate_base (void) { struct minimal_symbol *msymbol; CORE_ADDR address = 0; char **symbolp; /* For SunOS, we want to limit the search for the debug base symbol to the executable being debugged, since there is a duplicate named symbol in the shared library. We don't want the shared library versions. */ for (symbolp = debug_base_symbols; *symbolp != NULL; symbolp++) { msymbol = lookup_minimal_symbol (*symbolp, NULL, symfile_objfile); if ((msymbol != NULL) && (SYMBOL_VALUE_ADDRESS (msymbol) != 0)) { address = SYMBOL_VALUE_ADDRESS (msymbol); return (address); } } return (0); } /* LOCAL FUNCTION first_link_map_member -- locate first member in dynamic linker's map SYNOPSIS static CORE_ADDR first_link_map_member (void) DESCRIPTION Find the first element in the inferior's dynamic link map, and return its address in the inferior. This function doesn't copy the link map entry itself into our address space; current_sos actually does the reading. */ static CORE_ADDR first_link_map_member (void) { CORE_ADDR lm = 0; read_memory (debug_base, (char *) &dynamic_copy, sizeof (dynamic_copy)); if (dynamic_copy.ld_version >= 2) { /* It is a version that we can deal with, so read in the secondary structure and find the address of the link map list from it. */ read_memory (SOLIB_EXTRACT_ADDRESS (dynamic_copy.ld_un.ld_2), (char *) &ld_2_copy, sizeof (struct link_dynamic_2)); lm = SOLIB_EXTRACT_ADDRESS (ld_2_copy.ld_loaded); } return (lm); } static int open_symbol_file_object (void *from_ttyp) { return 1; } /* LOCAL FUNCTION current_sos -- build a list of currently loaded shared objects SYNOPSIS struct so_list *current_sos () DESCRIPTION Build a list of `struct so_list' objects describing the shared objects currently loaded in the inferior. This list does not include an entry for the main executable file. Note that we only gather information directly available from the inferior --- we don't examine any of the shared library files themselves. The declaration of `struct so_list' says which fields we provide values for. */ static struct so_list * sunos_current_sos (void) { CORE_ADDR lm; struct so_list *head = 0; struct so_list **link_ptr = &head; int errcode; char *buffer; /* Make sure we've looked up the inferior's dynamic linker's base structure. */ if (! debug_base) { debug_base = locate_base (); /* If we can't find the dynamic linker's base structure, this must not be a dynamically linked executable. Hmm. */ if (! debug_base) return 0; } /* Walk the inferior's link map list, and build our list of `struct so_list' nodes. */ lm = first_link_map_member (); while (lm) { struct so_list *new = (struct so_list *) xmalloc (sizeof (struct so_list)); struct cleanup *old_chain = make_cleanup (xfree, new); memset (new, 0, sizeof (*new)); new->lm_info = xmalloc (sizeof (struct lm_info)); make_cleanup (xfree, new->lm_info); new->lm_info->lm = xmalloc (sizeof (struct link_map)); make_cleanup (xfree, new->lm_info->lm); memset (new->lm_info->lm, 0, sizeof (struct link_map)); read_memory (lm, new->lm_info->lm, sizeof (struct link_map)); lm = LM_NEXT (new); /* Extract this shared object's name. */ target_read_string (LM_NAME (new), &buffer, SO_NAME_MAX_PATH_SIZE - 1, &errcode); if (errcode != 0) { warning ("current_sos: Can't read pathname for load map: %s\n", safe_strerror (errcode)); } else { strncpy (new->so_name, buffer, SO_NAME_MAX_PATH_SIZE - 1); new->so_name[SO_NAME_MAX_PATH_SIZE - 1] = '\0'; xfree (buffer); strcpy (new->so_original_name, new->so_name); } /* If this entry has no name, or its name matches the name for the main executable, don't include it in the list. */ if (! new->so_name[0] || match_main (new->so_name)) free_so (new); else { new->next = 0; *link_ptr = new; link_ptr = &new->next; } discard_cleanups (old_chain); } return head; } /* On some systems, the only way to recognize the link map entry for the main executable file is by looking at its name. Return non-zero iff SONAME matches one of the known main executable names. */ static int match_main (char *soname) { char **mainp; for (mainp = main_name_list; *mainp != NULL; mainp++) { if (strcmp (soname, *mainp) == 0) return (1); } return (0); } static int sunos_in_dynsym_resolve_code (CORE_ADDR pc) { return 0; } /* LOCAL FUNCTION disable_break -- remove the "mapping changed" breakpoint SYNOPSIS static int disable_break () DESCRIPTION Removes the breakpoint that gets hit when the dynamic linker completes a mapping change. */ static int disable_break (void) { CORE_ADDR breakpoint_addr; /* Address where end bkpt is set */ int in_debugger = 0; /* Read the debugger structure from the inferior to retrieve the address of the breakpoint and the original contents of the breakpoint address. Remove the breakpoint by writing the original contents back. */ read_memory (debug_addr, (char *) &debug_copy, sizeof (debug_copy)); /* Set `in_debugger' to zero now. */ write_memory (flag_addr, (char *) &in_debugger, sizeof (in_debugger)); breakpoint_addr = SOLIB_EXTRACT_ADDRESS (debug_copy.ldd_bp_addr); write_memory (breakpoint_addr, (char *) &debug_copy.ldd_bp_inst, sizeof (debug_copy.ldd_bp_inst)); /* For the SVR4 version, we always know the breakpoint address. For the SunOS version we don't know it until the above code is executed. Grumble if we are stopped anywhere besides the breakpoint address. */ if (stop_pc != breakpoint_addr) { warning ("stopped at unknown breakpoint while handling shared libraries"); } return 1; } /* LOCAL FUNCTION enable_break -- arrange for dynamic linker to hit breakpoint SYNOPSIS int enable_break (void) DESCRIPTION Both the SunOS and the SVR4 dynamic linkers have, as part of their debugger interface, support for arranging for the inferior to hit a breakpoint after mapping in the shared libraries. This function enables that breakpoint. For SunOS, there is a special flag location (in_debugger) which we set to 1. When the dynamic linker sees this flag set, it will set a breakpoint at a location known only to itself, after saving the original contents of that place and the breakpoint address itself, in it's own internal structures. When we resume the inferior, it will eventually take a SIGTRAP when it runs into the breakpoint. We handle this (in a different place) by restoring the contents of the breakpointed location (which is only known after it stops), chasing around to locate the shared libraries that have been loaded, then resuming. For SVR4, the debugger interface structure contains a member (r_brk) which is statically initialized at the time the shared library is built, to the offset of a function (_r_debug_state) which is guaran- teed to be called once before mapping in a library, and again when the mapping is complete. At the time we are examining this member, it contains only the unrelocated offset of the function, so we have to do our own relocation. Later, when the dynamic linker actually runs, it relocates r_brk to be the actual address of _r_debug_state(). The debugger interface structure also contains an enumeration which is set to either RT_ADD or RT_DELETE prior to changing the mapping, depending upon whether or not the library is being mapped or unmapped, and then set to RT_CONSISTENT after the library is mapped/unmapped. */ static int enable_break (void) { int success = 0; int j; int in_debugger; /* Get link_dynamic structure */ j = target_read_memory (debug_base, (char *) &dynamic_copy, sizeof (dynamic_copy)); if (j) { /* unreadable */ return (0); } /* Calc address of debugger interface structure */ debug_addr = SOLIB_EXTRACT_ADDRESS (dynamic_copy.ldd); /* Calc address of `in_debugger' member of debugger interface structure */ flag_addr = debug_addr + (CORE_ADDR) ((char *) &debug_copy.ldd_in_debugger - (char *) &debug_copy); /* Write a value of 1 to this member. */ in_debugger = 1; write_memory (flag_addr, (char *) &in_debugger, sizeof (in_debugger)); success = 1; return (success); } /* LOCAL FUNCTION special_symbol_handling -- additional shared library symbol handling SYNOPSIS void special_symbol_handling () DESCRIPTION Once the symbols from a shared object have been loaded in the usual way, we are called to do any system specific symbol handling that is needed. For SunOS4, this consists of grunging around in the dynamic linkers structures to find symbol definitions for "common" symbols and adding them to the minimal symbol table for the runtime common objfile. */ static void sunos_special_symbol_handling (void) { int j; if (debug_addr == 0) { /* Get link_dynamic structure */ j = target_read_memory (debug_base, (char *) &dynamic_copy, sizeof (dynamic_copy)); if (j) { /* unreadable */ return; } /* Calc address of debugger interface structure */ /* FIXME, this needs work for cross-debugging of core files (byteorder, size, alignment, etc). */ debug_addr = SOLIB_EXTRACT_ADDRESS (dynamic_copy.ldd); } /* Read the debugger structure from the inferior, just to make sure we have a current copy. */ j = target_read_memory (debug_addr, (char *) &debug_copy, sizeof (debug_copy)); if (j) return; /* unreadable */ /* Get common symbol definitions for the loaded object. */ if (debug_copy.ldd_cp) { solib_add_common_symbols (SOLIB_EXTRACT_ADDRESS (debug_copy.ldd_cp)); } } /* Relocate the main executable. This function should be called upon stopping the inferior process at the entry point to the program. The entry point from BFD is compared to the PC and if they are different, the main executable is relocated by the proper amount. As written it will only attempt to relocate executables which lack interpreter sections. It seems likely that only dynamic linker executables will get relocated, though it should work properly for a position-independent static executable as well. */ static void sunos_relocate_main_executable (void) { asection *interp_sect; CORE_ADDR pc = read_pc (); /* Decide if the objfile needs to be relocated. As indicated above, we will only be here when execution is stopped at the beginning of the program. Relocation is necessary if the address at which we are presently stopped differs from the start address stored in the executable AND there's no interpreter section. The condition regarding the interpreter section is very important because if there *is* an interpreter section, execution will begin there instead. When there is an interpreter section, the start address is (presumably) used by the interpreter at some point to start execution of the program. If there is an interpreter, it is normal for it to be set to an arbitrary address at the outset. The job of finding it is handled in enable_break(). So, to summarize, relocations are necessary when there is no interpreter section and the start address obtained from the executable is different from the address at which GDB is currently stopped. [ The astute reader will note that we also test to make sure that the executable in question has the DYNAMIC flag set. It is my opinion that this test is unnecessary (undesirable even). It was added to avoid inadvertent relocation of an executable whose e_type member in the ELF header is not ET_DYN. There may be a time in the future when it is desirable to do relocations on other types of files as well in which case this condition should either be removed or modified to accomodate the new file type. (E.g, an ET_EXEC executable which has been built to be position-independent could safely be relocated by the OS if desired. It is true that this violates the ABI, but the ABI has been known to be bent from time to time.) - Kevin, Nov 2000. ] */ interp_sect = bfd_get_section_by_name (exec_bfd, ".interp"); if (interp_sect == NULL && (bfd_get_file_flags (exec_bfd) & DYNAMIC) != 0 && bfd_get_start_address (exec_bfd) != pc) { struct cleanup *old_chain; struct section_offsets *new_offsets; int i, changed; CORE_ADDR displacement; /* It is necessary to relocate the objfile. The amount to relocate by is simply the address at which we are stopped minus the starting address from the executable. We relocate all of the sections by the same amount. This behavior is mandated by recent editions of the System V ABI. According to the System V Application Binary Interface, Edition 4.1, page 5-5: ... Though the system chooses virtual addresses for individual processes, it maintains the segments' relative positions. Because position-independent code uses relative addressesing between segments, the difference between virtual addresses in memory must match the difference between virtual addresses in the file. The difference between the virtual address of any segment in memory and the corresponding virtual address in the file is thus a single constant value for any one executable or shared object in a given process. This difference is the base address. One use of the base address is to relocate the memory image of the program during dynamic linking. The same language also appears in Edition 4.0 of the System V ABI and is left unspecified in some of the earlier editions. */ displacement = pc - bfd_get_start_address (exec_bfd); changed = 0; new_offsets = xcalloc (symfile_objfile->num_sections, sizeof (struct section_offsets)); old_chain = make_cleanup (xfree, new_offsets); for (i = 0; i < symfile_objfile->num_sections; i++) { if (displacement != ANOFFSET (symfile_objfile->section_offsets, i)) changed = 1; new_offsets->offsets[i] = displacement; } if (changed) objfile_relocate (symfile_objfile, new_offsets); do_cleanups (old_chain); } } /* GLOBAL FUNCTION sunos_solib_create_inferior_hook -- shared library startup support SYNOPSIS void sunos_solib_create_inferior_hook() DESCRIPTION When gdb starts up the inferior, it nurses it along (through the shell) until it is ready to execute it's first instruction. At this point, this function gets called via expansion of the macro SOLIB_CREATE_INFERIOR_HOOK. For SunOS executables, this first instruction is typically the one at "_start", or a similar text label, regardless of whether the executable is statically or dynamically linked. The runtime startup code takes care of dynamically linking in any shared libraries, once gdb allows the inferior to continue. For SVR4 executables, this first instruction is either the first instruction in the dynamic linker (for dynamically linked executables) or the instruction at "start" for statically linked executables. For dynamically linked executables, the system first exec's /lib/libc.so.N, which contains the dynamic linker, and starts it running. The dynamic linker maps in any needed shared libraries, maps in the actual user executable, and then jumps to "start" in the user executable. For both SunOS shared libraries, and SVR4 shared libraries, we can arrange to cooperate with the dynamic linker to discover the names of shared libraries that are dynamically linked, and the base addresses to which they are linked. This function is responsible for discovering those names and addresses, and saving sufficient information about them to allow their symbols to be read at a later time. FIXME Between enable_break() and disable_break(), this code does not properly handle hitting breakpoints which the user might have set in the startup code or in the dynamic linker itself. Proper handling will probably have to wait until the implementation is changed to use the "breakpoint handler function" method. Also, what if child has exit()ed? Must exit loop somehow. */ static void sunos_solib_create_inferior_hook (void) { /* Relocate the main executable if necessary. */ sunos_relocate_main_executable (); if ((debug_base = locate_base ()) == 0) { /* Can't find the symbol or the executable is statically linked. */ return; } if (!enable_break ()) { warning ("shared library handler failed to enable breakpoint"); return; } /* SCO and SunOS need the loop below, other systems should be using the special shared library breakpoints and the shared library breakpoint service routine. Now run the target. It will eventually hit the breakpoint, at which point all of the libraries will have been mapped in and we can go groveling around in the dynamic linker structures to find out what we need to know about them. */ clear_proceed_status (); stop_soon_quietly = 1; stop_signal = TARGET_SIGNAL_0; do { target_resume (pid_to_ptid (-1), 0, stop_signal); wait_for_inferior (); } while (stop_signal != TARGET_SIGNAL_TRAP); stop_soon_quietly = 0; /* We are now either at the "mapping complete" breakpoint (or somewhere else, a condition we aren't prepared to deal with anyway), so adjust the PC as necessary after a breakpoint, disable the breakpoint, and add any shared libraries that were mapped in. */ if (DECR_PC_AFTER_BREAK) { stop_pc -= DECR_PC_AFTER_BREAK; write_register (PC_REGNUM, stop_pc); } if (!disable_break ()) { warning ("shared library handler failed to disable breakpoint"); } solib_add ((char *) 0, 0, (struct target_ops *) 0, auto_solib_add); } static void sunos_clear_solib (void) { debug_base = 0; } static void sunos_free_so (struct so_list *so) { xfree (so->lm_info->lm); xfree (so->lm_info); } static void sunos_relocate_section_addresses (struct so_list *so, struct section_table *sec) { sec->addr += LM_ADDR (so); sec->endaddr += LM_ADDR (so); } static struct target_so_ops sunos_so_ops; void _initialize_sunos_solib (void) { sunos_so_ops.relocate_section_addresses = sunos_relocate_section_addresses; sunos_so_ops.free_so = sunos_free_so; sunos_so_ops.clear_solib = sunos_clear_solib; sunos_so_ops.solib_create_inferior_hook = sunos_solib_create_inferior_hook; sunos_so_ops.special_symbol_handling = sunos_special_symbol_handling; sunos_so_ops.current_sos = sunos_current_sos; sunos_so_ops.open_symbol_file_object = open_symbol_file_object; sunos_so_ops.in_dynsym_resolve_code = sunos_in_dynsym_resolve_code; /* FIXME: Don't do this here. *_gdbarch_init() should set so_ops. */ current_target_so_ops = &sunos_so_ops; }
Go to most recent revision | Compare with Previous | Blame | View Log