Subversion Repositories or1k

# Copyright 1999, 2000 Free Software Foundation, Inc.

# This program is free software; you can redistribute it and/or modify
# it under the terms of the GNU General Public License as published by
# the Free Software Foundation; either version 2 of the License, or
# (at your option) any later version.
# 
# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
# GNU General Public License for more details.
# 
# You should have received a copy of the GNU General Public License
# along with this program; if not, write to the Free Software
# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  

# Please email any bugs, comments, and/or additions to this file to:
# bug-gdb@prep.ai.mit.edu

# This file was based on a file written by Fred Fish. (fnf@cygnus.com)

# Test setup routines that work with the MI interpreter.

# The variable mi_gdb_prompt is a regexp which matches the gdb mi prompt.
# Set it if it is not already set.
global mi_gdb_prompt
if ![info exists mi_gdb_prompt] then {
    set mi_gdb_prompt "\[(\]gdb\[)\] \r\n"
}

set MIFLAGS "-i=mi"

#
# mi_gdb_exit -- exit the GDB, killing the target program if necessary
#
proc mi_gdb_exit {} {
    catch mi_uncatched_gdb_exit
}

proc mi_uncatched_gdb_exit {} {
    global GDB
    global GDBFLAGS
    global verbose
    global gdb_spawn_id;
    global gdb_prompt
    global mi_gdb_prompt
    global MIFLAGS

    gdb_stop_suppressing_tests;

    if { [info procs sid_exit] != "" } {
        sid_exit
    }

    if ![info exists gdb_spawn_id] {
        return;
    }

    verbose "Quitting $GDB $GDBFLAGS $MIFLAGS"

    if { [is_remote host] && [board_info host exists fileid] } {
        send_gdb "999-gdb-exit\n";
        gdb_expect 10 {
            -re "y or n" {
                send_gdb "y\n";
                exp_continue;
            }
            -re "Undefined command.*$gdb_prompt $" {
                send_gdb "quit\n"
                exp_continue;
            }
            -re "DOSEXIT code" { }
            default { }
        }
    }

    if ![is_remote host] {
        remote_close host;
    }
    unset gdb_spawn_id
}

#
# start gdb -- start gdb running, default procedure
#
# When running over NFS, particularly if running many simultaneous
# tests on different hosts all using the same server, things can
# get really slow.  Give gdb at least 3 minutes to start up.
#
proc mi_gdb_start { } {
    global verbose
    global GDB
    global GDBFLAGS
    global gdb_prompt
    global mi_gdb_prompt
    global timeout
    global gdb_spawn_id;
    global MIFLAGS

    gdb_stop_suppressing_tests;

    # Start SID.
    if { [info procs sid_start] != "" } {
        verbose "Spawning SID"
        sid_start
    }

    verbose "Spawning $GDB -nw $GDBFLAGS $MIFLAGS"

    if [info exists gdb_spawn_id] {
        return 0;
    }

    if ![is_remote host] {
        if { [which $GDB] == 0 } then {
            perror "$GDB does not exist."
            exit 1
        }
    }
    set res [remote_spawn host "$GDB -nw $GDBFLAGS $MIFLAGS [host_info gdb_opts]"];
    if { $res < 0 || $res == "" } {
        perror "Spawning $GDB failed."
        return 1;
    }
    gdb_expect {
        -re ".*$mi_gdb_prompt$" {
            verbose "GDB initialized."
        }
        -re ".*$gdb_prompt $" {
            untested "Skip mi tests (got non-mi prompt)."
            remote_close host;
            return -1;
        }
        -re ".*unrecognized option.*for a complete list of options." {
            untested "Skip mi tests (not compiled with mi support)."
            remote_close host;
            return -1;
        }
        -re ".*Interpreter `mi' unrecognized." {
            untested "Skip mi tests (not compiled with mi support)."
            remote_close host;
            return -1;
        }
        timeout {
            perror "(timeout) GDB never initialized after 10 seconds."
            remote_close host;
            return -1
        }
    }
    set gdb_spawn_id -1;

    # FIXME: mi output does not go through pagers, so these can be removed.
    # force the height to "unlimited", so no pagers get used
    send_gdb "100-gdb-set height 0\n"
    gdb_expect 10 {
        -re ".*100-gdb-set height 0\r\n100\\\^done\r\n$mi_gdb_prompt$" { 
            verbose "Setting height to 0." 2
        }
        timeout {
            warning "Couldn't set the height to 0"
        }
    }
    # force the width to "unlimited", so no wraparound occurs
    send_gdb "101-gdb-set width 0\n"
    gdb_expect 10 {
        -re ".*101-gdb-set width 0\r\n101\\\^done\r\n$mi_gdb_prompt$" {
            verbose "Setting width to 0." 2
        }
        timeout {
            warning "Couldn't set the width to 0."
        }
    }

    return 0;
}

# Many of the tests depend on setting breakpoints at various places and
# running until that breakpoint is reached.  At times, we want to start
# with a clean-slate with respect to breakpoints, so this utility proc 
# lets us do this without duplicating this code everywhere.
#

proc mi_delete_breakpoints {} {
    global mi_gdb_prompt

# FIXME: The mi operation won't accept a prompt back and will use the 'all' arg
    send_gdb "102-break-delete\n"
    gdb_expect 30 {
         -re "Delete all breakpoints.*y or n.*$" {
            send_gdb "y\n";
            exp_continue
         }
         -re ".*102-break-delete\r\n102\\\^done\r\n$mi_gdb_prompt$" {
            # This happens if there were no breakpoints
         }
         timeout { perror "Delete all breakpoints in delete_breakpoints (timeout)" ; return }
    }

# The correct output is not "No breakpoints or watchpoints." but an
# empty BreakpointTable. Also, a query is not acceptable with mi.
    send_gdb "103-break-list\n"
    gdb_expect 30 {
         -re "103-break-list\r\n103\\\^done,BreakpointTable=\{\}\r\n$mi_gdb_prompt$" {}
         -re "103-break-list\r\n103\\\^done,BreakpointTable=\{nr_rows=\".\",nr_cols=\".\",hdr=\\\[\{width=\".*\",alignment=\".*\",col_name=\"number\",colhdr=\"Num\"\}.*colhdr=\"Type\".*colhdr=\"Disp\".*colhdr=\"Enb\".*colhdr=\"Address\".*colhdr=\"What\".*\\\],body=\\\[\\\]\}" {}
         -re "103-break-list\r\n103\\\^doneNo breakpoints or watchpoints.\r\n\r\n$mi_gdb_prompt$" {warning "Unexpected console text received"}
         -re "$mi_gdb_prompt$" { perror "Breakpoints not deleted" ; return }
         -re "Delete all breakpoints.*or n.*$" {
            warning "Unexpected prompt for breakpoints deletion";
            send_gdb "y\n";
            exp_continue
        }
         timeout { perror "-break-list (timeout)" ; return }
    }
}

proc mi_gdb_reinitialize_dir { subdir } {
    global mi_gdb_prompt

    global suppress_flag
    if { $suppress_flag } {
        return
    }

    if [is_remote host] {
        return "";
    }

    send_gdb "104-environment-directory\n"
    gdb_expect 60 {
        -re ".*Reinitialize source path to empty.*y or n. " {
            warning "Got confirmation prompt for dir reinitialization."
            send_gdb "y\n"
            gdb_expect 60 {
                -re "$mi_gdb_prompt$" {}
                timeout {error "Dir reinitialization failed (timeout)"}
            }
        }
        -re "$mi_gdb_prompt$" {}
        timeout {error "Dir reinitialization failed (timeout)"}
    }

    send_gdb "105-environment-directory $subdir\n"
    gdb_expect 60 {
        -re "Source directories searched.*$mi_gdb_prompt$" {
            verbose "Dir set to $subdir"
        }
        -re "105\\\^done\r\n$mi_gdb_prompt$" {
            # FIXME: We return just the prompt for now.
            verbose "Dir set to $subdir"
            # perror "Dir \"$subdir\" failed."
        }
    }
}

#
# load a file into the debugger.
# return a -1 if anything goes wrong.
#
proc mi_gdb_load { arg } {
    global verbose
    global loadpath
    global loadfile
    global GDB
    global mi_gdb_prompt
    upvar timeout timeout

    # ``gdb_unload''

    # ``gdb_file_cmd''
# FIXME: Several of these patterns are only acceptable for console
# output.  Queries are an error for mi.
    send_gdb "105-file-exec-and-symbols $arg\n"
    gdb_expect 120 {
        -re "Reading symbols from.*done.*$mi_gdb_prompt$" {
            verbose "\t\tLoaded $arg into the $GDB"
            # All OK
        }
        -re "has no symbol-table.*$mi_gdb_prompt$" {
            perror "$arg wasn't compiled with \"-g\""
            return -1
        }
        -re "A program is being debugged already.*Kill it.*y or n. $" {
            send_gdb "y\n"
                verbose "\t\tKilling previous program being debugged"
            exp_continue
        }
        -re "Load new symbol table from \".*\".*y or n. $" {
            send_gdb "y\n"
            gdb_expect 120 {
                -re "Reading symbols from.*done.*$mi_gdb_prompt$" {
                    verbose "\t\tLoaded $arg with new symbol table into $GDB"
                    # All OK
                }
                timeout {
                    perror "(timeout) Couldn't load $arg, other program already loaded."
                    return -1
                }
            }
        }
        -re "No such file or directory.*$mi_gdb_prompt$" {
            perror "($arg) No such file or directory\n"
            return -1
        }
        -re "105-file-exec-and-symbols .*\r\n105\\\^done\r\n$mi_gdb_prompt$" {
            # We are just giving the prompt back for now
            # All OK
            }
        timeout {
            perror "couldn't load $arg into $GDB (timed out)."
            return -1
        }
        eof {
            # This is an attempt to detect a core dump, but seems not to
            # work.  Perhaps we need to match .* followed by eof, in which
            # gdb_expect does not seem to have a way to do that.
            perror "couldn't load $arg into $GDB (end of file)."
            return -1
        }
    }
    
    # ``load''
    if { [info procs send_target_sid] != "" } {
        # For SID, things get complex
        send_target_sid
        gdb_expect 60 {
            -re "\\^done,.*$mi_gdb_prompt$" {
            }
            timeout {
                perror "Unable to connect to SID target"
                return -1
            }
        }
        send_gdb "48-target-download\n"
        gdb_expect 10 {
            -re "48\\^done.*$mi_gdb_prompt$" {
            }
            timeout {
                perror "Unable to download to SID target"
                return -1
            }
        }
    } elseif { [target_info protocol] == "sim" } {
        # For the simulator, just connect to it directly.
        send_gdb "47-target-select sim\n"
        gdb_expect 10 {
            -re "47\\^connected.*$mi_gdb_prompt$" {
            }
            timeout {
                perror "Unable to select sim target"
                return -1
            }
        }
        send_gdb "48-target-download\n"
        gdb_expect 10 {
            -re "48\\^done.*$mi_gdb_prompt$" {
            }
            timeout {
                perror "Unable to download to sim target"
                return -1
            }
        }
    }
    return 0
}

# mi_gdb_test COMMAND PATTERN MESSAGE -- send a command to gdb; test the result.
#
# COMMAND is the command to execute, send to GDB with send_gdb.  If
#   this is the null string no command is sent.
# PATTERN is the pattern to match for a PASS, and must NOT include
#   the \r\n sequence immediately before the gdb prompt.
# MESSAGE is an optional message to be printed.  If this is
#   omitted, then the pass/fail messages use the command string as the
#   message.  (If this is the empty string, then sometimes we don't
#   call pass or fail at all; I don't understand this at all.)
#
# Returns:
#    1 if the test failed,
#    0 if the test passes,
#   -1 if there was an internal error.
#  
proc mi_gdb_test { args } {
    global verbose
    global mi_gdb_prompt
    global GDB expect_out
    upvar timeout timeout

    if [llength $args]>2 then {
        set message [lindex $args 2]
    } else {
        set message [lindex $args 0]
    }
    set command [lindex $args 0]
    set pattern [lindex $args 1]

    if [llength $args]==5 {
        set question_string [lindex $args 3];
        set response_string [lindex $args 4];
    } else {
        set question_string "^FOOBAR$"
    }

    if $verbose>2 then {
        send_user "Sending \"$command\" to gdb\n"
        send_user "Looking to match \"$pattern\"\n"
        send_user "Message is \"$message\"\n"
    }

    set result -1
    set string "${command}\n";
    if { $command != "" } {
        while { "$string" != "" } {
            set foo [string first "\n" "$string"];
            set len [string length "$string"];
            if { $foo < [expr $len - 1] } {
                set str [string range "$string" 0 $foo];
                if { [send_gdb "$str"] != "" } {
                    global suppress_flag;

                    if { ! $suppress_flag } {
                        perror "Couldn't send $command to GDB.";
                    }
                    fail "$message";
                    return $result;
                }
                gdb_expect 2 {
                    -re "\[\r\n\]" { }
                    timeout { }
                }
                set string [string range "$string" [expr $foo + 1] end];
            } else {
                break;
            }
        }
        if { "$string" != "" } {
            if { [send_gdb "$string"] != "" } {
                global suppress_flag;

                if { ! $suppress_flag } {
                    perror "Couldn't send $command to GDB.";
                }
                fail "$message";
                return $result;
            }
        }
    }

    if [info exists timeout] {
        set tmt $timeout;
    } else {
        global timeout;
        if [info exists timeout] {
            set tmt $timeout;
        } else {
            set tmt 60;
        }
    }
    gdb_expect $tmt {
         -re "\\*\\*\\* DOSEXIT code.*" {
             if { $message != "" } {
                 fail "$message";
             }
             gdb_suppress_entire_file "GDB died";
             return -1;
         }
         -re "Ending remote debugging.*$mi_gdb_prompt\[ \]*$" {
            if ![isnative] then {
                warning "Can`t communicate to remote target."
            }
            gdb_exit
            gdb_start
            set result -1
        }
         -re "(${question_string})$" {
            send_gdb "$response_string\n";
            exp_continue;
        }
         -re "Undefined.* command:.*$mi_gdb_prompt\[ \]*$" {
            perror "Undefined command \"$command\"."
            fail "$message"
            set result 1
        }
         -re "Ambiguous command.*$mi_gdb_prompt\[ \]*$" {
            perror "\"$command\" is not a unique command name."
            fail "$message"
            set result 1
        }
         -re "\[\r\n\]*($pattern)\[\r\n\]+$mi_gdb_prompt\[ \]*$" {
            if ![string match "" $message] then {
                pass "$message"
            }
            set result 0
        }
         -re "Program exited with code \[0-9\]+.*$mi_gdb_prompt\[ \]*$" {
            if ![string match "" $message] then {
                set errmsg "$message: the program exited"
            } else {
                set errmsg "$command: the program exited"
            }
            fail "$errmsg"
            return -1
        }
         -re "The program is not being run.*$mi_gdb_prompt\[ \]*$" {
            if ![string match "" $message] then {
                set errmsg "$message: the program is no longer running"
            } else {
                set errmsg "$command: the program is no longer running"
            }
            fail "$errmsg"
            return -1
        }
         -re ".*$mi_gdb_prompt\[ \]*$" {
            if ![string match "" $message] then {
                fail "$message"
            }
            set result 1
        }
         "<return>" {
            send_gdb "\n"
            perror "Window too small."
            fail "$message"
        }
         -re "\\(y or n\\) " {
            send_gdb "n\n"
            perror "Got interactive prompt."
            fail "$message"
        }
         eof {
             perror "Process no longer exists"
             if { $message != "" } {
                 fail "$message"
             }
             return -1
        }
         full_buffer {
            perror "internal buffer is full."
            fail "$message"
        }
        timeout {
            if ![string match "" $message] then {
                fail "$message (timeout)"
            }
            set result 1
        }
    }
    return $result
}

#
# MI run command.  (A modified version of gdb_run_cmd)
#

# In patterns, the newline sequence ``\r\n'' is matched explicitly as
# ``.*$'' could swallow up output that we attempt to match elsewhere.

proc mi_run_cmd {args} {
    global suppress_flag
    if { $suppress_flag } {
        return -1
    }
    global mi_gdb_prompt

    if [target_info exists gdb_init_command] {
        send_gdb "[target_info gdb_init_command]\n";
        gdb_expect 30 {
            -re "$mi_gdb_prompt$" { }
            default {
                perror "gdb_init_command for target failed";
                return;
            }
        }
    }

    if [target_info exists use_gdb_stub] {
        if [target_info exists gdb,do_reload_on_run] {
            # Specifying no file, defaults to the executable
            # currently being debugged.
            if { [mi_gdb_load ""] < 0 } {
                return;
            }
            send_gdb "000-exec-continue\n";
            gdb_expect 60 {
                -re "Continu\[^\r\n\]*\[\r\n\]" {}
                default {}
            }
            return;
        }

        if [target_info exists gdb,start_symbol] {
            set start [target_info gdb,start_symbol];
        } else {
            set start "start";
        }

        # HACK: Should either use 000-jump or fix the target code
        # to better handle RUN.
        send_gdb  "jump *$start\n"
        warning "Using CLI jump command, expect run-to-main FAIL"
        return
    }

    send_gdb "000-exec-run $args\n"
    gdb_expect {
        -re "000\\^running\r\n${mi_gdb_prompt}" {
        }
        timeout {
            perror "Unable to start target"
            return
        }
    }
    # NOTE: Shortly after this there will be a ``000*stopping,...(gdb)''
}

#
# Just like run-to-main but works with the MI interface
#

proc mi_run_to_main { } {
    global suppress_flag
    if { $suppress_flag } {
        return -1
    }

    global mi_gdb_prompt
    global hex
    global decimal
    global srcdir
    global subdir
    global binfile
    global srcfile

    set test "mi run-to-main"
    mi_delete_breakpoints
    mi_gdb_reinitialize_dir $srcdir/$subdir
    mi_gdb_load ${binfile}

    mi_gdb_test "200-break-insert main" \
            "200\\^done,bkpt=\{number=\"1\",type=\"breakpoint\",disp=\"keep\",enabled=\"y\",addr=\"$hex\",func=\"main\",file=\".*\",line=\"\[0-9\]*\",times=\"0\"\}" \
            "breakpoint at main"

    mi_run_cmd
    gdb_expect {
        -re "000\\*stopped,reason=\"breakpoint-hit\",bkptno=\"1\",thread-id=\"$decimal\",frame=\{addr=\"$hex\",func=\"main\",args=\(\\\[\\\]\|\{\}\),file=\".*\",line=\"\[0-9\]*\"\}\r\n$mi_gdb_prompt$" {
            pass "$test"
            return 0
        }
        -re ".*$mi_gdb_prompt$" {
            fail "$test (2)"
        }
        timeout {
            fail "$test (timeout)"
            return -1
        }
    }
}


# Next to the next statement

proc mi_next { test } {
    global suppress_flag
    if { $suppress_flag } {
        return -1
    }
    global mi_gdb_prompt
    send_gdb "220-exec-next\n"
    gdb_expect {
        -re "220\\^running\r\n${mi_gdb_prompt}220\\*stopped,reason=\"end-stepping-range\",thread-id=\"$decimal\",frame=\{addr=\"$hex\",func=\".*\",args=\[\\\[\{].*[\\\]\}\],file=\".*\",line=\"\[0-9\]*\"\}\r\n$mi_gdb_prompt$" {
            pass "$test"
            return 0
        }
        timeout {
            fail "$test"
            return -1
        }
    }
}


# Step to the next statement

proc mi_step { test } {
    global suppress_flag
    if { $suppress_flag } {
        return -1
    }
    global mi_gdb_prompt
    send_gdb "220-exec-step\n"
    gdb_expect {
        -re "220\\^running\r\n${mi_gdb_prompt}220\\*stopped,reason=\"end-stepping-range\",thread-id=\"$decimal\",frame=\{addr=\"$hex\",func=\".*\",args=\[\\\[\{\].*\[\\\]\}\],file=\".*\",line=\"\[0-9\]*\"\}\r\n$mi_gdb_prompt$" {
            pass "$test"
            return 0
        }
        timeout {
            fail "$test"
            return -1
        }
    }
}

# cmd should not include the number or newline (i.e. "exec-step 3", not
# "220-exec-step 3\n"

# Can not match -re ".*\r\n${mi_gdb_prompt}", because of false positives
# after the first prompt is printed.

proc mi_run_to_helper { cmd reason func args file line extra test } {
    global suppress_flag
    if { $suppress_flag } {
        return -1
    }
    global mi_gdb_prompt
    global hex
    global decimal
    send_gdb "220-$cmd\n"
    gdb_expect {
        -re "220\\^running\r\n${mi_gdb_prompt}220\\*stopped,reason=\"$reason\",thread-id=\"$decimal\",frame=\{addr=\"$hex\",func=\"$func\",args=$args,file=\".*$file\",line=\"$line\"\}$extra\r\n$mi_gdb_prompt$" {
            pass "$test"
            return 0
        }
        -re "220\\^running\r\n${mi_gdb_prompt}220\\*stopped,reason=\"$reason\",thread-id=\"$decimal\",frame=\{addr=\"$hex\",func=\".*\",args=\[\\\[\{\].*\[\\\]\}\],file=\".*\",line=\"\[0-9\]*\"\}.*\r\n$mi_gdb_prompt$" {
            fail "$test (stopped at wrong place)"
            return -1
        }
        -re "220\\^running\r\n${mi_gdb_prompt}.*\r\n${mi_gdb_prompt}$" {
            fail "$test (unknown output after running)"
            return -1
        }
        timeout {
            fail "$test (timeout)"
            return -1
        }
    }
}

proc mi_run_to { cmd reason func args file line extra test } {
    mi_run_to_helper "$cmd" "$reason" "$func" "\\\[$args\\\]" \
        "$file" "$line" "$extra" "$test"
}

proc mi_next_to { func args file line test } {
    mi_run_to "exec-next" "end-stepping-range" "$func" "$args" \
        "$file" "$line" "" "$test"
}

proc mi_step_to { func args file line test } {
    mi_run_to "exec-step" "end-stepping-range" "$func" "$args" \
        "$file" "$line" "" "$test"
}

proc mi_finish_to { func args file line result ret test } {
    mi_run_to "exec-finish" "function-finished" "$func" "$args" \
        "$file" "$line" \
        ",gdb-result-var=\"$result\",return-value=\"$ret\"" \
        "$test"
}

proc mi_continue_to { bkptno func args file line test } {
    mi_run_to "exec-continue" "breakpoint-hit\",bkptno=\"$bkptno" \
        "$func" "$args" "$file" "$line" "" "$test"
}

proc mi0_run_to { cmd reason func args file line extra test } {
    mi_run_to_helper "$cmd" "$reason" "$func" "\{$args\}" \
        "$file" "$line" "$extra" "$test"
}

proc mi0_next_to { func args file line test } {
    mi0_run_to "exec-next" "end-stepping-range" "$func" "$args" \
        "$file" "$line" "" "$test"
}

proc mi0_step_to { func args file line test } {
    mi0_run_to "exec-step" "end-stepping-range" "$func" "$args" \
        "$file" "$line" "" "$test"
}

proc mi0_finish_to { func args file line result ret test } {
    mi0_run_to "exec-finish" "function-finished" "$func" "$args" \
        "$file" "$line" \
        ",gdb-result-var=\"$result\",return-value=\"$ret\"" \
        "$test"
}

proc mi0_continue_to { bkptno func args file line test } {
    mi0_run_to "exec-continue" "breakpoint-hit\",bkptno=\"$bkptno" \
        "$func" "$args" "$file" "$line" "" "$test"
}