URL
https://opencores.org/ocsvn/or1k/or1k/trunk
Subversion Repositories or1k
[/] [or1k/] [trunk/] [gdb-5.3/] [readline/] [CHANGELOG] - Rev 1775
Go to most recent revision | Compare with Previous | Blame | View Log
[Readline-specific changelog. Descriptions of changes to the source are
found in the bash changelog.]
6/9
---
Makefile.in
- quote value of ${INSTALL_DATA} when passing it to makes in
subdirectories
7/1
---
Makefile.in
- don't pass INSTALL_DATA to a make in the `doc' subdirectory; let
autoconf set the value itself in the Makefile
- removed a stray `-' before $(RANLIB) in the `install' recipe
doc/Makefile.in
- add a VPATH assignment so the documentation is not remade if it's
already up-to-date in the distribution
configure.in
- call AC_SUBST(LOCAL_LDFLAGS), since Makefile.in contains
@LOCAL_LDFLAGS@
7/9
---
config.h.in
- add define lines for STRUCT_WINSIZE_IN_SYS_IOCTL and
STRUCT_WINSIZE_IN_TERMIOS
configure.in
- call BASH_STRUCT_WINSIZE to look for the definition of
`struct winsize'
7/17
----
configure.in
- call AC_MINIX
config.h.in
- add define line for AC_MINIX
7/18
----
Makefile.in
- add `install-shared' and `uninstall-shared' targets
8/4
---
Makefile.in
- install and uninstall libhistory.a in the `install' and
`uninstall' targets
9/4
---
configure.in
- bumped LIBVERSION up to 2.1.1, indicating that this is patch
level 1 to release 2.1
9/16
----
Makefile.in
- `make distclean' now descends into the `examples' subdir
doc/Makefile.in
- the `distclean' and `maintainer-clean' targets should remove
Makefile
examples/Makefile.in
- added the various clean targets
4/2
---
configure.in
- bumped LIBVERSION up to 2.2
4/18
----
[readline-2.2 released]
4/20
----
Makefile.in
- make `libhistory.a' a dependency of `install'
- fixed a typo in the recipe for `install' that copied libreadline.a
to libhistory.old right after installing it
4/27
----
doc/Makefile.in
- install {readline,history}.info out of the source directory if
they are not found in the current (build) directory -- only an
issue if the libraries are built in a different directory than
the source directory
5/1
---
support/shobj-conf
- script from the bash distribution to do shared object and library
configuration
shlib/Makefile.in
- new directory and makefile to handle building shared versions of
libreadline and libhistory, controlled by support/shobj-conf
5/7
---
doc/Makefile.in
- set SHELL to /bin/sh, rather than relying on make to be correct
5/14
----
savestring.c
- new file, moved from shell.c, for backwards compatibility
Makefile.in, shlib/Makefile.in
- make sure savestring.c is compiled and added to libreadline and
libhistory
[THERE ARE NO MORE #ifdef SHELL LINES IN THE C SOURCE FILES.]
5/15
----
README
- updated description of shared library creation for the new scheme
[THERE ARE NO MORE #ifdef SHELL LINES IN ANY OF THE SOURCE FILES.]
Makefile.in
- bumped SHLIB_MAJOR up to 4 since we've augmented the library
API
- rlconf.h is now one of the installed headers, so applications can
find out whether things like vi-mode are available in the installed
libreadline
5/20
----
configure.in
- changed RL_LIBRARY_VERSION to 4.0 to match the version of the
installed shared libraries
6/5
---
rlstdc.h
- new file
Makefile.in
- rlstdc.h is now one of the installed headers
8/3
---
shlib/Makefile.in
- made the suffix rule that creates xx.so from xx.c write the
compiler output to `a.o', which is then mv'd to xx.so, because
some compilers (Sun WSpro 4.2, for example) don't allow any
suffixes other than `.o' for `cc -c' (not even `a.out')
9/15
----
Makefile.in
- AR and ARFLAGS are now substituted by configure, used in recipes
that build the libraries
configure.in
- use AC_CHECK_PROG to check for ar
- set ARFLAGS if it has not already been set in the environment
10/5
----
Makefile.in
- removed savestring.o from object file list
10/28
-----
shlib/Makefile.in
- don't use a fixed filename in the .c.so suffix rule to avoid
problems with parallel makes
12/21
-----
support/shlib-install
- new script to install shared readline and history libraries
shlib/Makefile.in
- changed to call shlib-install for install and uninstall targets
[readline-4.0-beta1 frozen]
12/22
-----
configure.in
- call AC_SUBST for SHOBJ_XLDFLAGS and SHLIB_LIBS
shlib/Makefile.in
- SHOBJ_XLDFLAGS and SHLIB_LIBS are now substituted by configure
- add $(SHLIB_LIBS) at end of command line that builds the shared
libraries (currently needed only by AIX 4.2)
12/31
-----
MANIFEST, MANIFEST.doc
- the TOC html files are no longer generated and no longer part of
the distribution
2/18/1999
---------
configure.in
- set MAKE_SHELL to /bin/sh and substitute into the Makefiles
Makefile.in,{doc,examples,shlib}/Makefile.in
- set SHELL from @MAKE_SHELL@
[readline-4.0 released]
3/11
----
doc/Makefile.in
- removed references to HTMLTOC, since separate HTML table-of-contents
files are no longer created
examples/Makefile.in
- remove `*.exe' in clean target for MS-DOS
Makefile.in
- make `readline' target depend on ./libreadline.a
- configure now substitutes TERMCAP_LIB into Makefile.in
- use ${TERMCAP_LIB} instead of -ltermcap in recipe for `readline'
- clean target now removes readline and readline.exe in case they
get built
configure.in
- use `pwd.exe' to set BUILD_DIR on MS-DOS DJGPP
3/15
----
support/shlib-install
- Irix 5.x and Irix 6.x should install shared libraries like Solaris 2
- changes for installing on hp-ux 1[01].x
3/23
----
configure.in
- make sure that the $CC argument to shobj-conf is quoted
4/8
---
xmalloc.h, rlprivate.h, rlshell.h
- new files
Makefile.in,shlib/Makefile.in
- add dependencies on xmalloc.h, rlshell.h
- add xmalloc.h, rlprivate.h, rlshell.h to list of header files
MANIFEST
- add xmalloc.h, rlprivate.h, rlshell.h
4/9
---
Makefile.in,shlib/Makefile.in
- add dependencies on rlprivate.h
4/13
----
doc/Makefile.in
- add variable, PSDVI, which is the desired resolution of the
generated postscript files. Set to 300 because I don't have
any 600-dpi printers
- set LANGUAGE= before calling makeinfo, so messages are in English
- add rluserman.{info,dvi,ps,html} to appropriate variables
- add rules to create rluserman.{info,dvi,ps,html}
- install and uninstall rluserman.info, but don't update the directory
file in $(infodir) yet
MANIFEST
- add doc/rluserman.{texinfo,info,dvi,ps,html}
4/30
----
configure.in
- updated library version to 4.1
5/3
---
configure.in
- SHLIB_MAJOR and SHLIB_MINOR shared library version numbers are
constructed from $LIBRARY_VERSION and substituted into Makefiles
5/5
---
support/shlib-install
- OSF/1 installs shared libraries like Solaris
Makefile.in
- broke the header file install and uninstall into two new targets:
install-headers and uninstall-headers
- install and uninstall depend on install-headers and uninstall-headers
respectively
- changed install-shared and uninstall-shared targets to depend on
install-headers and uninstall-headers, respectively, so users may
choose to install only the shared libraries. I'm not sure about
the uninstall one yet -- maybe it should check whether or not
the static libraries are installed and not remove the header files
if they are
9/3
---
configure.in, config.h.in
- added test for memmove (for later use)
- changed version to 4.1-beta1
9/13
----
examples/rlfe.c
- Per Bothner's `rlfe' readline front-end program
examples/Makefile.in
- added rules to build rlfe
9/21
----
support/shlib-install
- changes to handle FreeBSD-3.x elf or a.out shared libraries, which
have different semantics and need different naming conventions
1/24/2000
---------
doc/Makefile.in
- remove *.bt and *.bts on `make clean'
2/4
---
configure.in
- changed LIBVERSION to 4.1-beta5
Go to most recent revision | Compare with Previous | Blame | View Log