URL
https://opencores.org/ocsvn/or1k/or1k/trunk
Subversion Repositories or1k
[/] [or1k/] [trunk/] [gdb-5.3/] [sim/] [arm/] [wrapper.c] - Rev 1782
Go to most recent revision | Compare with Previous | Blame | View Log
/* run front end support for arm Copyright (C) 1995, 1996, 1997, 2000, 2001, 2002 Free Software Foundation, Inc. This file is part of ARM SIM. GCC is free software; you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free Software Foundation; either version 2, or (at your option) any later version. GCC is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for more details. You should have received a copy of the GNU General Public License along with this program; if not, write to the Free Software Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. */ /* This file provides the interface between the simulator and run.c and gdb (when the simulator is linked with gdb). All simulator interaction should go through this file. */ #include <stdio.h> #include <stdarg.h> #include <string.h> #include <bfd.h> #include <signal.h> #include "gdb/callback.h" #include "gdb/remote-sim.h" #include "armdefs.h" #include "armemu.h" #include "dbg_rdi.h" #include "ansidecl.h" #include "sim-utils.h" #include "run-sim.h" #include "gdb/sim-arm.h" host_callback *sim_callback; static struct ARMul_State *state; /* Who is using the simulator. */ static SIM_OPEN_KIND sim_kind; /* argv[0] */ static char *myname; /* Memory size in bytes. */ static int mem_size = (1 << 23); /* Non-zero to display start up banner, and maybe other things. */ static int verbosity; /* Non-zero to set big endian mode. */ static int big_endian; int stop_simulator; static void init () { static int done; if (!done) { ARMul_EmulateInit (); state = ARMul_NewState (); state->bigendSig = (big_endian ? HIGH : LOW); ARMul_MemoryInit (state, mem_size); ARMul_OSInit (state); ARMul_CoProInit (state); state->verbose = verbosity; done = 1; } } /* Set verbosity level of simulator. This is not intended to produce detailed tracing or debugging information. Just summaries. */ /* FIXME: common/run.c doesn't do this yet. */ void sim_set_verbose (v) int v; { verbosity = v; } /* Set the memory size to SIZE bytes. Must be called before initializing simulator. */ /* FIXME: Rename to sim_set_mem_size. */ void sim_size (size) int size; { mem_size = size; } void ARMul_ConsolePrint VPARAMS ((ARMul_State * state, const char * format, ...)) { va_list ap; if (state->verbose) { va_start (ap, format); vprintf (format, ap); va_end (ap); } } ARMword ARMul_Debug (state, pc, instr) ARMul_State * state ATTRIBUTE_UNUSED; ARMword pc ATTRIBUTE_UNUSED; ARMword instr ATTRIBUTE_UNUSED; { return 0; } int sim_write (sd, addr, buffer, size) SIM_DESC sd ATTRIBUTE_UNUSED; SIM_ADDR addr; unsigned char * buffer; int size; { int i; init (); for (i = 0; i < size; i++) ARMul_SafeWriteByte (state, addr + i, buffer[i]); return size; } int sim_read (sd, addr, buffer, size) SIM_DESC sd ATTRIBUTE_UNUSED; SIM_ADDR addr; unsigned char * buffer; int size; { int i; init (); for (i = 0; i < size; i++) buffer[i] = ARMul_SafeReadByte (state, addr + i); return size; } int sim_trace (sd) SIM_DESC sd ATTRIBUTE_UNUSED; { (*sim_callback->printf_filtered) (sim_callback, "This simulator does not support tracing\n"); return 1; } int sim_stop (sd) SIM_DESC sd ATTRIBUTE_UNUSED; { state->Emulate = STOP; stop_simulator = 1; return 1; } void sim_resume (sd, step, siggnal) SIM_DESC sd ATTRIBUTE_UNUSED; int step; int siggnal ATTRIBUTE_UNUSED; { state->EndCondition = 0; stop_simulator = 0; if (step) { state->Reg[15] = ARMul_DoInstr (state); if (state->EndCondition == 0) state->EndCondition = RDIError_BreakpointReached; } else { state->NextInstr = RESUME; /* treat as PC change */ state->Reg[15] = ARMul_DoProg (state); } FLUSHPIPE; } SIM_RC sim_create_inferior (sd, abfd, argv, env) SIM_DESC sd ATTRIBUTE_UNUSED; struct _bfd * abfd; char ** argv; char ** env; { int argvlen = 0; int mach; char **arg; if (abfd != NULL) ARMul_SetPC (state, bfd_get_start_address (abfd)); else ARMul_SetPC (state, 0); /* ??? */ mach = bfd_get_mach (abfd); switch (mach) { default: (*sim_callback->printf_filtered) (sim_callback, "Unknown machine type '%d'; please update sim_create_inferior.\n", mach); /* fall through */ case 0: /* We wouldn't set the machine type with earlier toolchains, so we explicitly select a processor capable of supporting all ARMs in 32bit mode. */ case bfd_mach_arm_XScale: ARMul_SelectProcessor (state, ARM_v5_Prop | ARM_v5e_Prop | ARM_XScale_Prop); break; case bfd_mach_arm_5: if (bfd_family_coff (abfd)) { /* This is a special case in order to support COFF based ARM toolchains. The COFF header does not have enough room to store all the different kinds of ARM cpu, so the XScale, v5T and v5TE architectures all default to v5. (See coff_set_flags() in bdf/coffcode.h). So if we see a v5 machine type here, we assume it could be any of the above architectures and so select the most feature-full. */ ARMul_SelectProcessor (state, ARM_v5_Prop | ARM_v5e_Prop | ARM_XScale_Prop); break; } /* Otherwise drop through. */ case bfd_mach_arm_5T: ARMul_SelectProcessor (state, ARM_v5_Prop); break; case bfd_mach_arm_5TE: ARMul_SelectProcessor (state, ARM_v5_Prop | ARM_v5e_Prop); break; case bfd_mach_arm_4: case bfd_mach_arm_4T: ARMul_SelectProcessor (state, ARM_v4_Prop); break; case bfd_mach_arm_3: case bfd_mach_arm_3M: ARMul_SelectProcessor (state, ARM_Lock_Prop); break; case bfd_mach_arm_2: case bfd_mach_arm_2a: ARMul_SelectProcessor (state, ARM_Fix26_Prop); break; } if ( mach != bfd_mach_arm_3 && mach != bfd_mach_arm_3M && mach != bfd_mach_arm_2 && mach != bfd_mach_arm_2a) { /* Reset mode to ARM. A gdb user may rerun a program that had entered THUMB mode from the start and cause the ARM-mode startup code to be executed in THUMB mode. */ ARMul_SetCPSR (state, SVC32MODE); } if (argv != NULL) { /* Set up the command line by laboriously stringing together the environment carefully picked apart by our caller. */ /* Free any old stuff. */ if (state->CommandLine != NULL) { free (state->CommandLine); state->CommandLine = NULL; } /* See how much we need. */ for (arg = argv; *arg != NULL; arg++) argvlen += strlen (*arg) + 1; /* Allocate it. */ state->CommandLine = malloc (argvlen + 1); if (state->CommandLine != NULL) { arg = argv; state->CommandLine[0] = '\0'; for (arg = argv; *arg != NULL; arg++) { strcat (state->CommandLine, *arg); strcat (state->CommandLine, " "); } } } if (env != NULL) { /* Now see if there's a MEMSIZE spec in the environment. */ while (*env) { if (strncmp (*env, "MEMSIZE=", sizeof ("MEMSIZE=") - 1) == 0) { char *end_of_num; /* Set up memory limit. */ state->MemSize = strtoul (*env + sizeof ("MEMSIZE=") - 1, &end_of_num, 0); } env++; } } return SIM_RC_OK; } void sim_info (sd, verbose) SIM_DESC sd ATTRIBUTE_UNUSED; int verbose ATTRIBUTE_UNUSED; { } static int frommem (state, memory) struct ARMul_State *state; unsigned char *memory; { if (state->bigendSig == HIGH) return (memory[0] << 24) | (memory[1] << 16) | (memory[2] << 8) | (memory[3] << 0); else return (memory[3] << 24) | (memory[2] << 16) | (memory[1] << 8) | (memory[0] << 0); } static void tomem (state, memory, val) struct ARMul_State *state; unsigned char *memory; int val; { if (state->bigendSig == HIGH) { memory[0] = val >> 24; memory[1] = val >> 16; memory[2] = val >> 8; memory[3] = val >> 0; } else { memory[3] = val >> 24; memory[2] = val >> 16; memory[1] = val >> 8; memory[0] = val >> 0; } } int sim_store_register (sd, rn, memory, length) SIM_DESC sd ATTRIBUTE_UNUSED; int rn; unsigned char *memory; int length ATTRIBUTE_UNUSED; { init (); switch ((enum sim_arm_regs) rn) { case SIM_ARM_R0_REGNUM: case SIM_ARM_R1_REGNUM: case SIM_ARM_R2_REGNUM: case SIM_ARM_R3_REGNUM: case SIM_ARM_R4_REGNUM: case SIM_ARM_R5_REGNUM: case SIM_ARM_R6_REGNUM: case SIM_ARM_R7_REGNUM: case SIM_ARM_R8_REGNUM: case SIM_ARM_R9_REGNUM: case SIM_ARM_R10_REGNUM: case SIM_ARM_R11_REGNUM: case SIM_ARM_R12_REGNUM: case SIM_ARM_R13_REGNUM: case SIM_ARM_R14_REGNUM: case SIM_ARM_R15_REGNUM: /* PC */ case SIM_ARM_FP0_REGNUM: case SIM_ARM_FP1_REGNUM: case SIM_ARM_FP2_REGNUM: case SIM_ARM_FP3_REGNUM: case SIM_ARM_FP4_REGNUM: case SIM_ARM_FP5_REGNUM: case SIM_ARM_FP6_REGNUM: case SIM_ARM_FP7_REGNUM: case SIM_ARM_FPS_REGNUM: ARMul_SetReg (state, state->Mode, rn, frommem (state, memory)); break; case SIM_ARM_PS_REGNUM: state->Cpsr = frommem (state, memory); ARMul_CPSRAltered (state); break; default: return 0; } return -1; } int sim_fetch_register (sd, rn, memory, length) SIM_DESC sd ATTRIBUTE_UNUSED; int rn; unsigned char *memory; int length ATTRIBUTE_UNUSED; { ARMword regval; init (); switch ((enum sim_arm_regs) rn) { case SIM_ARM_R0_REGNUM: case SIM_ARM_R1_REGNUM: case SIM_ARM_R2_REGNUM: case SIM_ARM_R3_REGNUM: case SIM_ARM_R4_REGNUM: case SIM_ARM_R5_REGNUM: case SIM_ARM_R6_REGNUM: case SIM_ARM_R7_REGNUM: case SIM_ARM_R8_REGNUM: case SIM_ARM_R9_REGNUM: case SIM_ARM_R10_REGNUM: case SIM_ARM_R11_REGNUM: case SIM_ARM_R12_REGNUM: case SIM_ARM_R13_REGNUM: case SIM_ARM_R14_REGNUM: case SIM_ARM_R15_REGNUM: /* PC */ regval = ARMul_GetReg (state, state->Mode, rn); break; case SIM_ARM_FP0_REGNUM: case SIM_ARM_FP1_REGNUM: case SIM_ARM_FP2_REGNUM: case SIM_ARM_FP3_REGNUM: case SIM_ARM_FP4_REGNUM: case SIM_ARM_FP5_REGNUM: case SIM_ARM_FP6_REGNUM: case SIM_ARM_FP7_REGNUM: case SIM_ARM_FPS_REGNUM: memset (memory, 0, length); return 0; case SIM_ARM_PS_REGNUM: regval = ARMul_GetCPSR (state); break; default: return 0; } while (length) { tomem (state, memory, regval); length -= 4; memory += 4; regval = 0; } return -1; } #ifdef SIM_TARGET_SWITCHES static void sim_target_parse_arg_array PARAMS ((char **)); typedef struct { char * swi_option; unsigned int swi_mask; } swi_options; #define SWI_SWITCH "--swi-support" static swi_options options[] = { { "none", 0 }, { "demon", SWI_MASK_DEMON }, { "angel", SWI_MASK_ANGEL }, { "redboot", SWI_MASK_REDBOOT }, { "all", -1 }, { "NONE", 0 }, { "DEMON", SWI_MASK_DEMON }, { "ANGEL", SWI_MASK_ANGEL }, { "REDBOOT", SWI_MASK_REDBOOT }, { "ALL", -1 } }; int sim_target_parse_command_line (argc, argv) int argc; char ** argv; { int i; for (i = 1; i < argc; i++) { char * ptr = argv[i]; int arg; if ((ptr == NULL) || (* ptr != '-')) break; if (strncmp (ptr, SWI_SWITCH, sizeof SWI_SWITCH - 1) != 0) continue; if (ptr[sizeof SWI_SWITCH - 1] == 0) { /* Remove this option from the argv array. */ for (arg = i; arg < argc; arg ++) argv[arg] = argv[arg + 1]; argc --; ptr = argv[i]; } else ptr += sizeof SWI_SWITCH; swi_mask = 0; while (* ptr) { int i; for (i = sizeof options / sizeof options[0]; i--;) if (strncmp (ptr, options[i].swi_option, strlen (options[i].swi_option)) == 0) { swi_mask |= options[i].swi_mask; ptr += strlen (options[i].swi_option); if (* ptr == ',') ++ ptr; break; } if (i < 0) break; } if (* ptr != 0) fprintf (stderr, "Ignoring swi options: %s\n", ptr); /* Remove this option from the argv array. */ for (arg = i; arg < argc; arg ++) argv[arg] = argv[arg + 1]; argc --; i --; } return argc; } static void sim_target_parse_arg_array (argv) char ** argv; { int i; for (i = 0; argv[i]; i++) ; return (void) sim_target_parse_command_line (i, argv); } void sim_target_display_usage () { fprintf (stderr, "%s=<list> Comma seperated list of SWI protocols to supoport.\n\ This list can contain: NONE, DEMON, ANGEL, REDBOOT and/or ALL.\n", SWI_SWITCH); } #endif SIM_DESC sim_open (kind, ptr, abfd, argv) SIM_OPEN_KIND kind; host_callback *ptr; struct _bfd *abfd; char **argv; { sim_kind = kind; if (myname) free (myname); myname = (char *) xstrdup (argv[0]); sim_callback = ptr; #ifdef SIM_TARGET_SWITCHES sim_target_parse_arg_array (argv); #endif /* Decide upon the endian-ness of the processor. If we can, get the information from the bfd itself. Otherwise look to see if we have been given a command line switch that tells us. Otherwise default to little endian. */ if (abfd != NULL) big_endian = bfd_big_endian (abfd); else if (argv[1] != NULL) { int i; /* Scan for endian-ness switch. */ for (i = 0; (argv[i] != NULL) && (argv[i][0] != 0); i++) if (argv[i][0] == '-' && argv[i][1] == 'E') { char c; if ((c = argv[i][2]) == 0) { ++i; c = argv[i][0]; } switch (c) { case 0: sim_callback->printf_filtered (sim_callback, "No argument to -E option provided\n"); break; case 'b': case 'B': big_endian = 1; break; case 'l': case 'L': big_endian = 0; break; default: sim_callback->printf_filtered (sim_callback, "Unrecognised argument to -E option\n"); break; } } } return (SIM_DESC) 1; } void sim_close (sd, quitting) SIM_DESC sd ATTRIBUTE_UNUSED; int quitting ATTRIBUTE_UNUSED; { if (myname) free (myname); myname = NULL; } SIM_RC sim_load (sd, prog, abfd, from_tty) SIM_DESC sd; char *prog; bfd *abfd; int from_tty ATTRIBUTE_UNUSED; { bfd *prog_bfd; prog_bfd = sim_load_file (sd, myname, sim_callback, prog, abfd, sim_kind == SIM_OPEN_DEBUG, 0, sim_write); if (prog_bfd == NULL) return SIM_RC_FAIL; ARMul_SetPC (state, bfd_get_start_address (prog_bfd)); if (abfd == NULL) bfd_close (prog_bfd); return SIM_RC_OK; } void sim_stop_reason (sd, reason, sigrc) SIM_DESC sd ATTRIBUTE_UNUSED; enum sim_stop *reason; int *sigrc; { if (stop_simulator) { *reason = sim_stopped; *sigrc = SIGINT; } else if (state->EndCondition == 0) { *reason = sim_exited; *sigrc = state->Reg[0] & 255; } else { *reason = sim_stopped; if (state->EndCondition == RDIError_BreakpointReached) *sigrc = SIGTRAP; else *sigrc = 0; } } void sim_do_command (sd, cmd) SIM_DESC sd ATTRIBUTE_UNUSED; char *cmd ATTRIBUTE_UNUSED; { (*sim_callback->printf_filtered) (sim_callback, "This simulator does not accept any commands.\n"); } void sim_set_callbacks (ptr) host_callback *ptr; { sim_callback = ptr; }
Go to most recent revision | Compare with Previous | Blame | View Log