URL
https://opencores.org/ocsvn/or1k/or1k/trunk
Subversion Repositories or1k
[/] [or1k/] [trunk/] [insight/] [dejagnu/] [baseboards/] [sparclite-coff.exp] - Rev 1767
Go to most recent revision | Compare with Previous | Blame | View Log
# This is a list of toolchains that are supported on this board.
set_board_info target_install {sparclite-coff}
# Load the generic configuration for this board. This will define a
# set of generic routines used by the tool to communicate with the
# board.
load_generic_config "slite";
# It needs no multilib flags by default.
process_multilib_options ""
set_board_info compiler "[find_gcc]";
set_board_info cflags "[newlib_include_flags] [libgloss_include_flags]";
set_board_info ldflags "-nostdlib [libgloss_link_flags] [newlib_link_flags] -Wl,-Ttext,0x40005000 -N";
# ex930 linker script.
set_board_info ldscript "-Tex930.ld";
# The address at which the stub needs to be linked.
set_board_info gdb_stub_offset "0x40000000";
# The board doesn't return exit statuses and we need to indicate this.
# However, the standard GCC wrapper won't work with this target because
# it doesn't return stuff from printf ().
set_board_info needs_status_wrapper 1;
# We use a GDB stub to talk to the board.
set_board_info use_gdb_stub 1;
# For GDB, we need to use a real stub (not the separate loader scheme
# we use for Sparclet).
set_board_info gdb_stub "";
# And the protocol is "sparclite serial".
set_board_info gdb_protocol "sparclite serial";
# No mathlib.
set_board_info mathlib "";
# We can't do I/O in GDB.
set_board_info gdb,noinferiorio 1;
# Or pass arguments.
set_board_info noargs 1;
# Or do signals.
set_board_info gdb,nosignals 1;
Go to most recent revision | Compare with Previous | Blame | View Log