URL
https://opencores.org/ocsvn/or1k/or1k/trunk
Subversion Repositories or1k
[/] [or1k/] [trunk/] [insight/] [dejagnu/] [baseboards/] [vr4300.exp] - Rev 1767
Go to most recent revision | Compare with Previous | Blame | View Log
# Danger, Will Robinson! Settings in this file do not override
# previous settings for the board being defined.
# This is a list of toolchains that are supported on this board.
set_board_info target_install {mips64vr4300-elf mips64-elf}
# Load the generic configuration for this board. This will define a basic
# set of routines needed by the tool to communicate with the board.
load_generic_config "vr4300"
# It's a little-endian board.
process_multilib_options "little-endian"
# We only support newlib on this target. We assume that all multilib
# options have been specified before we get here.
set_board_info compiler "[find_gcc]"
set_board_info cflags "[libgloss_include_flags] [newlib_include_flags]"
set_board_info ldflags "[libgloss_link_flags] [newlib_link_flags]"
# IDT linker script.
set_board_info ldscript "-Wl,-Tidt.ld"
# GDB doesn't return exit statuses and we need to indicate this;
# the standard GCC wrapper will work with this target.
set_board_info needs_status_wrapper 1
# The GDB protocol used with this board.
set_board_info gdb_protocol "mips"
# This board is unreliable. If a test times out, the board should be
# rebooted and the test re-run.
set_board_info unreliable 1
# Can't pass arguments to the program.
set_board_info noargs 1
# No support for signals.
set_board_info gdb,nosignals 1
# We need to clear the floating-point status register before running.
# This command will be sent after connecting to the board.
set_board_info gdb_init_command "print/x \$fsr = 0x0"
Go to most recent revision | Compare with Previous | Blame | View Log