URL
https://opencores.org/ocsvn/or1k/or1k/trunk
Subversion Repositories or1k
[/] [or1k/] [trunk/] [insight/] [dejagnu/] [config/] [gdb-comm.exp] - Rev 1776
Go to most recent revision | Compare with Previous | Blame | View Log
# Copyright (C) 1996, 1997, 1998 Free Software Foundation, Inc.
# This program is free software; you can redistribute it and/or modify
# it under the terms of the GNU General Public License as published by
# the Free Software Foundation; either version 2 of the License, or
# (at your option) any later version.
#
# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
# GNU General Public License for more details.
#
# You should have received a copy of the GNU General Public License
# along with this program; if not, write to the Free Software
# Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
# Please email any bugs, comments, and/or additions to this file to:
# DejaGnu@cygnus.com
# Note: some of this was cribbed from the gdb testsuite since we need
# to use some pretty standard gdb features (breakpoints in particular).
# Load up some standard junk.
load_lib remote.exp
if ![info exists board] {
perror "$board must be set before loading gdb-comm"
}
# The number of times we've tried to download/execute this executable.
set try_again 0
#
# Delete all breakpoints and verify that they were deleted. If anything
# goes wrong, return -1.
#
proc gdb_comm_delete_breakpoints {} {
global gdb_prompt
remote_send host "delete breakpoints\n";
remote_expect host 10 {
-re "Delete all breakpoints.*y or n. $" {
remote_send host "y\n"
exp_continue
}
-re ".*$gdb_prompt $" { }
timeout { perror "Delete all breakpoints (timeout)" ; return -1}
}
remote_send host "info breakpoints\n"
remote_expect host 10 {
-re "No breakpoints or watchpoints..*$gdb_prompt $" {}
-re ".*$gdb_prompt $" { perror "breakpoints not deleted" ; return -1}
timeout { perror "info breakpoints (timeout)" ; return -1}
}
return 0;
}
#
# Inform the debugger that we have a new exec file.
# return a -1 if anything goes wrong, 0 on success.
#
proc gdb_comm_file_cmd { arg } {
global verbose
global loadpath
global loadfile
global GDB
global gdb_prompt
upvar timeout timeout
# The "file" command loads up a new symbol file for gdb, deal with
# the various messages it might spew out.
if [is_remote host] {
set arg [remote_download host $arg a.out];
}
remote_send host "file $arg\n"
remote_expect host 60 {
-re "Reading symbols from.*done.*$gdb_prompt $" {
verbose "\t\tLoaded $arg into the $GDB"
return 0
}
-re "has no symbol-table.*$gdb_prompt $" {
perror "$arg wasn't compiled with \"-g\""
return -1
}
-re "A program is being debugged already.*Kill it.*y or n. $" {
remote_send host "y\n"
verbose "\t\tKilling previous program being debugged"
exp_continue
}
-re "Load new symbol table from \".*\".*y or n.*$" {
remote_send host "y\n"
remote_expect host 60 {
-re "Reading symbols from.*done.*$gdb_prompt $" {
verbose "\t\tLoaded $arg with new symbol table into $GDB"
return 0
}
timeout {
perror "(timeout) Couldn't load $arg, other program already loaded."
return -1
}
}
}
-re ".*No such file or directory.*$gdb_prompt $" {
perror "($arg) No such file or directory\n"
return -1
}
-re "$gdb_prompt $" {
perror "couldn't load $arg into $GDB."
return -1
}
timeout {
perror "couldn't load $arg into $GDB (timed out)."
return -1
}
eof {
# This is an attempt to detect a core dump, but seems not to
# work. Perhaps we need to match .* followed by eof, in which
# expect does not seem to have a way to do that.
perror "couldn't load $arg into $GDB (end of file)."
return -1
}
}
return 0;
}
# Disconnect from the target and forget that we have an executable. Returns
# -1 on failure, 0 on success.
proc gdb_comm_go_idle { } {
global gdb_prompt;
if ![board_info host exists fileid] {
return -1;
}
remote_send host "target exec\n";
remote_expect host 10 {
-re "Kill it.*y or n.*$" {
remote_send host "y\n"
exp_continue;
}
-re "No exec.* file now.*$gdb_prompt $" {
return 0;
}
default {
remote_close host;
return -1;
}
}
}
# Start GDB running with target DEST.
proc gdb_comm_start { dest } {
global GDB
global gdb_prompt
global tool_root_dir
# The variable gdb_prompt is a regexp which matches the gdb prompt. Set it
# if it is not already set.
if ![board_info $dest exists gdb_prompt] then {
set gdb_prompt "\\(gdb\\)"
} else {
set gdb_prompt [board_info $dest gdb_prompt];
}
# Similarly for GDB. Look in the object directory for gdb if we aren't
# provided with one.
if ![info exists GDB] then {
set GDB "[lookfor_file ${tool_root_dir} gdb/gdb]"
if { $GDB == "" } {
set GDB [transform gdb]
}
}
if [board_info host exists gdb_opts] {
set gdb_opts [board_info host gdb_opts];
} else {
set gdb_opts ""
}
# Start up gdb (no startfiles, no windows) and wait for a prompt.
remote_spawn host "$GDB $gdb_opts -nw -nx";
remote_expect host 60 {
-re ".*$gdb_prompt $" { }
}
remote_send host "set height 0\n";
remote_expect host 10 {
-re ".*$gdb_prompt $" {}
}
remote_send host "set width 0\n";
remote_expect host 10 {
-re ".*$gdb_prompt $" {}
}
}
# Add a breakpoint at function FUNCTION. We assume that GDB has already been
# started.
proc gdb_comm_add_breakpoint { function } {
global gdb_prompt
remote_send host "break $function\n"
remote_expect host 60 {
-re "Breakpoint.*$gdb_prompt $" { return "" }
-re "Function.*not defined.*$gdb_prompt $" { return "undef" }
-re "No symbol table.*$gdb_prompt $" { return "undef" }
default {
return "untested"
}
}
}
#
# quit_gdb -- try to quit GDB gracefully
#
proc quit_gdb { } {
global gdb_prompt;
set spawn_id [board_info host fileid];
if { $spawn_id != "" && $spawn_id > -1 } {
if { [remote_send host "quit\n"] == "" } {
remote_expect host 10 {
-re ".*y or n.*$" {
remote_send host "y\n";
exp_continue;
}
-re ".*\[*\]\[*\]\[*\].*EXIT code" { }
default { }
}
}
}
if ![is_remote host] {
remote_close host;
}
}
proc gdb_comm_leave { } {
if [is_remote host] {
quit_gdb;
} else {
gdb_comm_go_idle;
}
}
#
# gdb_comm_load -- load the program and execute it
#
# PROG is a full pathname to the file to load, no arguments.
# Result is "untested", "pass", "fail", etc.
#
proc gdb_comm_load { dest prog args } {
global GDB
global GDBFLAGS
global gdb_prompt
global timeout
set argnames { "command-line arguments" "input file" "output file" }
for { set x 0; } { $x < [llength $args] } { incr x } {
if { [lindex $args $x] != "" } {
return [list "unsupported" "no support for [lindex $argnames $x] on this target"];
}
}
# Make sure the file we're supposed to load really exists.
if ![file exists $prog] then {
perror "$prog does not exist."
return [list "untested" ""];
}
if { [is_remote host] || ![board_info host exists fileid] } {
gdb_comm_start $dest;
}
# Remove all breakpoints, then tell the debugger that we have
# new exec file.
if { [gdb_comm_delete_breakpoints] != 0 } {
gdb_comm_leave;
return [gdb_comm_reload $dest $prog $args];
}
if { [gdb_comm_file_cmd $prog] != 0 } {
gdb_comm_leave;
return [gdb_comm_reload $dest $prog $args];
}
if [board_info $dest exists gdb_sect_offset] {
set textoff [board_info $dest gdb_sect_offset];
remote_send host "sect .text $textoff\n";
remote_expect host 10 {
-re "(0x\[0-9a-z]+) - 0x\[0-9a-z\]+ is \\.data" {
set dataoff $expect_out(1,string);
exp_continue;
}
-re "(0x\[0-9a-z\]+) - 0x\[0-9a-z\]+ is \\.bss" {
set bssoff $expect_out(1,string);
exp_continue;
}
-re "$gdb_prompt" { }
}
set dataoff [format 0x%x [expr $dataoff + $textoff]];
set bssoff [format 0x%x [expr $bssoff + $textoff]];
remote_send host "sect .data $dataoff\n";
remote_expect host 10 {
-re "$gdb_prompt" { }
}
remote_send host "sect .bss $bssoff\n";
remote_expect host 10 {
-re "$gdb_prompt" { }
}
}
# Now set up breakpoints in exit, _exit, and abort. These
# are used to determine if a c-torture test passed or failed. More
# work would be necessary for things like the g++ testsuite which
# use printf to indicate pass/fail status.
if { [gdb_comm_add_breakpoint _exit] != "" } {
gdb_comm_add_breakpoint exit;
}
gdb_comm_add_breakpoint abort;
set protocol [board_info $dest gdb_protocol];
if [board_info $dest exists gdb_serial] {
set targetname [board_info $dest gdb_serial];
} elseif [board_info $dest exists netport] {
set targetname [board_info $dest netport];
} else {
if [board_info $dest exists serial] {
set targetname [board_info $dest serial];
} else {
set targetname ""
}
}
if [board_info $dest exists baud] {
remote_send host "set remotebaud [board_info $dest baud]\n"
remote_expect host 10 {
-re ".*$gdb_prompt $" {}
default {
warning "failed setting baud rate";
}
}
}
remote_send host "target $protocol $targetname\n";
remote_expect host 60 {
-re "Couldn.t establish conn.*$gdb_prompt $" {
warning "Unable to connect to $targetname with GDB."
quit_gdb;
return [gdb_comm_reload $dest $prog $args]
}
-re "Ending remote.*$gdb_prompt $" {
warning "Unable to connect to $targetname with GDB."
quit_gdb;
return [gdb_comm_reload $dest $prog $args]
}
-re "Remote target $protocol connected to.*$gdb_prompt $" { }
-re "Remote target $targetname connected to.*$gdb_prompt $" { }
-re "Connected to ARM RDI target.*$gdb_prompt $" { }
-re "Connected to the simulator.*$gdb_prompt $" { }
-re "Remote.*using $targetname.*$gdb_prompt $" { }
-re "$gdb_prompt $" {
warning "Unable to connect to $targetname with GDB."
quit_gdb;
return [gdb_comm_reload $dest $prog $args]
}
-re ".*RDI_open.*should reset target.*" {
warning "RDI Open Failed"
quit_gdb;
return [gdb_comm_reload $dest $prog $args]
}
default {
warning "Unable to connect to $targetname with GDB."
quit_gdb;
return [gdb_comm_reload $dest $prog $args]
}
}
if [target_info exists gdb_init_command] {
remote_send host "[target_info gdb_init_command]\n";
remote_expect host 10 {
-re ".*$gdb_prompt $" { }
default {
gdb_comm_leave;
return [list "fail" ""];
}
}
}
# Now download the executable to the target board. If communications
# with the target are very slow the timeout might need to be increased.
if [board_info $dest exists gdb_load_offset] {
remote_send host "load $prog [board_info $dest gdb_load_offset]\n";
} else {
remote_send host "load\n"
}
remote_expect host 600 {
-re "text.*data.*$gdb_prompt $" { }
-re "data.*text.*$gdb_prompt $" { }
-re "$gdb_prompt $" {
warning "Unable to send program to target board."
gdb_comm_leave;
return [gdb_comm_reload $dest $prog $args];
}
default {
warning "Unable to send program to target board."
gdb_comm_leave;
return [gdb_comm_reload $dest $prog $args];
}
}
set output ""
# Now start up the program and look for our magic breakpoints.
# And a whole lot of other magic stuff too.
if [board_info $dest exists gdb_run_command] {
remote_send host "[board_info $dest gdb_run_command]\n";
} else {
remote_send host "run\n"
}
# FIXME: The value 300 below should be a parameter.
if [board_info $dest exists testcase_timeout] {
set testcase_timeout [board_info $dest testcase_timeout];
} else {
set testcase_timeout 300;
}
remote_expect host $testcase_timeout {
-re "Line.*Jump anyway.*.y or n.*" {
remote_send host "y\n";
exp_continue;
}
-re "Continuing( at |\\.| with no signal\\.)\[^\r\n\]*\[\r\n\]" {
exp_continue;
}
-re ".*Start it from the beginning?.*y or n.*" {
remote_send host "n\n";
remote_expect host 10 {
-re ".*$gdb_prompt $" {
remote_send host "signal 0\n";
remote_expect host 10 {
-re "signal 0\[\r\n\]+" { exp_continue; }
-re "Continuing(\\.| with no signal\\.)\[\r\n\]" {}
}
}
}
exp_continue
}
-re "(run\[\r\n\]*|)Starting program: \[^\r\n\]*\[\r\n\]" {
exp_continue
}
-re "$gdb_prompt (signal 0|continue)\[\r\n\]+Continuing(\\.| with no signal\\.)\[\r\n\]" {
exp_continue
}
-re "(.*)Breakpoint.*exit.*=0.*$gdb_prompt $" {
append output $expect_out(1,string);
set result [check_for_board_status output];
gdb_comm_leave;
if { $result > 0 } {
return [list "fail" $output];
}
return [list "pass" $output];
}
-re "(.*)Breakpoint.*exit.*=\[1-9\]\[0-9\]*.*$gdb_prompt $" {
append output $expect_out(1,string);
set result [check_for_board_status output];
gdb_comm_leave;
if { $result == 0 } {
return [list "pass" $output];
}
if [board_info $dest exists exit_statuses_bad] {
return [list "pass" $output];
}
return [list "fail" $output];
}
-re "(.*)Breakpoint.*exit.*$gdb_prompt $" {
append output $expect_out(1,string);
set status [check_for_board_status output];
gdb_comm_leave;
if { $status > 0 } {
return [list "fail" $output];
}
return [list "pass" $output];
}
-re "(.*)Breakpoint.*abort.*$gdb_prompt $" {
append output $expect_out(1,string);
check_for_board_status output;
gdb_comm_leave;
return [list "fail" $output];
}
-re "SIGTRAP.*$gdb_prompt $" {
return [gdb_comm_reload $dest $prog $args];
}
-re "(.*)Program (received |terminated ).*$gdb_prompt $" {
set output $expect_out(1,string);
check_for_board_status output;
gdb_comm_leave;
remote_reboot $dest;
return [list "fail" $output];
}
-re "(.*)Program exited with code \[0-9\]+.*$gdb_prompt $" {
set output $expect_out(1,string);
set status [check_for_board_status output];
gdb_comm_leave;
if { $status > 0 } {
return [list "fail" $output];
}
return [list "pass" $output];
}
default {
gdb_comm_leave;
if [board_info $dest exists unreliable] {
if { [board_info $dest unreliable] > 0 } {
global board_info;
set name [board_info $dest name];
incr board_info($name,unreliable) -1;
set result [gdb_comm_reload $dest $prog $args];
incr board_info($name,unreliable);
return $result;
}
}
return [list "fail" ""];
}
}
gdb_comm_leave;
return [list "fail" ""];
}
# If we've tried less than 4 times to load PROG, reboot the target, restart GDB
# and try again. Otherwise, return "untested".
proc gdb_comm_reload { dest prog aargs } {
global try_again;
# how many times have we done this?
set n_reloads [board_info $dest n_reloads]
if {$n_reloads == ""} {
set n_reloads 0
}
# increment it
global board_info
set name [board_info $dest name]
set board_info($dest,n_reloads) [expr {$n_reloads + 1}]
# how many times are we allowed to do this?
set max [board_info $dest max_reload_reboots]
if {$max == ""} {
set max 15
}
# if we've been doing this too much, something's very
# wrong. just give up, to reduce stress on boards.
if {$max == $n_reloads} {
perror "Too many reboots. Giving up."
}
if {$max <= $n_reloads} {
return {untested {}}
}
if { $try_again < 4 } {
global GDB;
remote_reboot $dest;
remote_close host;
incr try_again;
set result [eval remote_load \"$dest\" \"$prog\" $aargs]
set try_again 0;
return "$result";
} else {
set try_again 0;
return [list "untested" ""];
}
}
set_board_info protocol "gdb_comm";
Go to most recent revision | Compare with Previous | Blame | View Log