Subversion Repositories or1k

#
# Makefile for tcl debugger
#

VERSION = \"@DBG_VERSION_FULL@\"
SHORT_VERSION = @DBG_VERSION@

# Compatible with Tcl version 7.5
# Compatible with Tk version 4.1

srcdir  = @srcdir@
VPATH = @srcdir@

######################################################################
# The following lines are things you are likely to want to change
######################################################################

# Tcl include files.  (If you haven't installed Tcl yet, read the README file).
# This must point to the directory that contains ALL of Tcl's include
# files, not just the public ones.
TCLHDIR = @TCLHDIRDASHI@

# flags to pass to cc
# You should be able to leave this just the way it is.  However, here are some
# note if you run into problems:
#
# Avoid -O (optimize) unless you are convinced your optimizer is flawless
# (hint: not a chance).  I have heard many reports of -O causing Expect to
# misbehave.
# I encourage you to use -g (debugging).  While it is unlikely you will
# encounter an internal error in Expect, should this happen, I may just need
# the -g information and then you will need to recompile Expect.  As an aside,
# Expect is not a space or time pig, so this won't affect the performance of
# your Expect scripts.
# Note: On Linux systems which only have dynamic X libraries, the -g prevents
# the linker from using them.  So do not use -g on such systems.
CFLAGS = @DBG_CFLAGS@ @DBG_SHLIB_CFLAGS@

# which C compiler to use
CC = @CC@

# By default, `make install' will install the appropriate files in
# /usr/local/bin, /usr/local/lib, /usr/local/man, etc.  You can specify
# an installation prefix other than /usr/local here:
prefix = @prefix@

# You can specify a separate installation prefix for architecture-specific
# files such as binaries and libraries.
exec_prefix = @exec_prefix@

# If you have ranlib but it should be avoided, change this from "ranlib" #
# to something innocuous like "echo".  Known systems with this problem:
# older SCO boxes.
UNSHARED_RANLIB = @UNSHARED_RANLIB@

######################################################################
# End of things you are likely to want to change
######################################################################

libdir  = $(exec_prefix)/lib
datadir = $(prefix)/lib

mandir  = @mandir@
man1dir = $(mandir)/man1
includedir = $(prefix)/include

# Where to store utility scripts.  This corresponds to the variable
# "dbg_library".
DBG_SCRIPTDIR   = $(datadir)/dbg

INSTALL = @INSTALL@
INSTALL_PROGRAM = @INSTALL_PROGRAM@
INSTALL_DATA = @INSTALL_DATA@

AR = ar
ARFLAGS = cr

# TCLHDIR includes "-I"
CPPFLAGS =      -I. -I$(srcdir) $(TCLHDIR) \
                -DDBG_VERSION=$(VERSION) \
                -DDBG_SCRIPTDIR=\"$(DBG_SCRIPTDIR)\"

CFLAGS_INT = $(MH_CFLAGS) $(CPPFLAGS) $(CFLAGS)

.c.o:
        $(CC) -c $(CFLAGS_INT) $(HDEFS) $<

CFILES = Dbg.c Dbg_cmd.c
OFILES = Dbg.o Dbg_cmd.o

# libraries (both .a and shared)
DBG_LIB_FILES = @DBG_LIB_FILES@
# default Dbg library (shared if possible, otherwise static)
DBG_LIB_FILE = @DBG_LIB_FILE@
# Dbg object library (.a)
DBG_UNSHARED_LIB_FILE = @DBG_UNSHARED_LIB_FILE@
# Dbg object library (shared, if possible)
DBG_SHARED_LIB_FILE = @DBG_SHARED_LIB_FILE@

all: $(DBG_LIB_FILES)

$(DBG_UNSHARED_LIB_FILE): $(OFILES)
        -rm -f $(DBG_UNSHARED_LIB_FILE)
        $(AR) $(ARFLAGS) $(DBG_UNSHARED_LIB_FILE) $(OFILES)
        -$(UNSHARED_RANLIB) $(DBG_UNSHARED_LIB_FILE)

$(DBG_SHARED_LIB_FILE): $(OFILES)
        -rm -f $(DBG_SHARED_LIB_FILE)
        @TCL_SHLIB_LD@ -o $(DBG_SHARED_LIB_FILE) $(OFILES)

# Delete all the installed files that the `install' target creates
# (but not the noninstalled files such as `make all' creates)
uninstall:
        -rm -f  $(man1dir)/tcldbg.1 \
                $(libdir)/$(DBG_SHARED_LIB_FILE) \
                $(libdir)/$(DBG_UNSHARED_LIB_FILE) \
                $(includedir)/Dbg.h \
                $(DBG_SCRIPTDIR)/pkgIndex.tcl

install: $(DBG_LIB_FILES)
        ${srcdir}/mkinstalldirs $(man1dir) $(libdir) $(includedir) $(DBG_SCRIPTDIR)
        $(INSTALL_DATA) $(srcdir)/tcldbg.man $(man1dir)/tcldbg.1
        if [ -s $(DBG_UNSHARED_LIB_FILE) ] ; then \
          $(INSTALL_DATA) $(DBG_UNSHARED_LIB_FILE) $(libdir)/$(DBG_UNSHARED_LIB_FILE) ; \
          $(UNSHARED_RANLIB) $(libdir)/$(DBG_UNSHARED_LIB_FILE) ; \
        fi
        if [ -s $(DBG_SHARED_LIB_FILE) ] ; then \
          $(INSTALL_DATA) $(DBG_SHARED_LIB_FILE) $(libdir)/$(DBG_SHARED_LIB_FILE) ; \
        fi
        $(INSTALL_DATA) $(srcdir)/Dbg.h $(includedir)
# create utility-script directory
        $(INSTALL_DATA) $(srcdir)/Dbg_lib.tcl $(DBG_SCRIPTDIR)
        $(INSTALL_DATA) $(srcdir)/tclIndex $(DBG_SCRIPTDIR)


###################################
# Targets for Makefile and configure
###################################

Makefile: $(srcdir)/Makefile.in $(host_makefile_frag) config.status
        @echo "Rebuilding the Makefile..."
        $(SHELL) config.status

configure: $(srcdir)/configure.in $(srcdir)/Makefile.in $(srcdir)/aclocal.m4
        autoconf configure.in > configure
        -@chmod a+x configure
        -rm -f config.cache
     
config.status: $(srcdir)/configure
        @echo "Rebuilding config.status..."
        $(SHELL) ./config.status --recheck

################################################
# Various "clean" targets follow GNU conventions
################################################

clean:
        -rm -f *~ *.o core \
                $(DBG_UNSHARED_LIB_FILE) $(DBG_SHARED_LIB_FILE)

# like "clean", but also delete files created by "configure"
distclean: clean
        -rm -f Makefile config.status config.cache config.log Dbg_cf.h

# like "clean", but doesn't delete test utilities or massaged scripts
# because most people don't have to worry about them
mostlyclean:
        -rm -f *~ *.o core \
                $(DBG_UNSHARED_LIB_FILE) $(DBG_SHARED_LIB_FILE)

# delete everything from current directory that can be reconstructed
# except for configure
realclean:      distclean

tclIndex: Dbg_lib.tcl
        expect -c "auto_mkindex . *.tcl;exit"

LINTFLAGS = -h -q -x 

lint:
        lint $(LINTFLAGS) $(CPPFLAGS) $(CFILES) $(TCLLINTLIB) | tee debug.lint

##################################
# Targets for development at NIST
##################################

nist:
        configure --verbose --prefix=/depot/tcl --exec-prefix=/depot/tcl/arch

# report globals that shouldn't be public but are
bad_globals:
        nm $(DBG_UNSHARED_LIB_FILE) | egrep -v " [a-zU] | _Dbg"

# after copying source directory, restablish all links
symlink:
        rm -f aclocal.m4
        ln -s ../expect/aclocal.m4

######################################
# Targets for pushing out releases
######################################

FTPDIR = /proj/itl/www/div826/subject/expect/tcl-debug

ftp:    tcl-debug-$(SHORT_VERSION).tar.Z tcl-debug-$(SHORT_VERSION).tar.gz
        cp tcl-debug-$(SHORT_VERSION).tar.Z $(FTPDIR)/tcl-debug.tar.Z
        cp tcl-debug-$(SHORT_VERSION).tar.gz $(FTPDIR)/tcl-debug.tar.gz
        cp HISTORY $(FTPDIR)
        cp README $(FTPDIR)/README.distribution
        rm tcl-debug-$(SHORT_VERSION).tar*
        ls -l $(FTPDIR)/tcl-debug.tar*

# make an alpha relase and install it on ftp server
alpha:  tcl-debug-$(SHORT_VERSION).tar.Z tcl-debug-$(SHORT_VERSION).tar.gz
        cp tcl-debug-$(SHORT_VERSION).tar.Z $(FTPDIR)/tcl-debug-alpha.tar.Z
        cp tcl-debug-$(SHORT_VERSION).tar.gz $(FTPDIR)/tcl-debug-alpha.tar.gz
        rm tcl-debug-$(SHORT_VERSION).tar*
        ls -l $(FTPDIR)/tcl-debug-alpha.tar*

tcl-debug-$(SHORT_VERSION).tar:
        rm -f ../tcl-debug-$(SHORT_VERSION)
        ln -s `pwd` ../tcl-debug-$(SHORT_VERSION)
        cd ..;tar cvfh $@ `pubfile tcl-debug-$(SHORT_VERSION)`
        mv ../$@ .

tcl-debug-$(SHORT_VERSION).tar.Z:       tcl-debug-$(SHORT_VERSION).tar
        compress -fc tcl-debug-$(SHORT_VERSION).tar > $@

tcl-debug-$(SHORT_VERSION).tar.gz:      tcl-debug-$(SHORT_VERSION).tar
        gzip -fc tcl-debug-$(SHORT_VERSION).tar > $@

Dbg.o: $(srcdir)/Dbg.c $(srcdir)/Dbg.h