OpenCores
URL https://opencores.org/ocsvn/or1k/or1k/trunk

Subversion Repositories or1k

[/] [or1k/] [trunk/] [insight/] [gdb/] [config/] [m68k/] [xm-isi.h] - Rev 1765

Compare with Previous | Blame | View Log

/* OBSOLETE /* Definitions to make GDB run on an ISI Optimum V (3.05) under 4.3bsd. */
/* OBSOLETE    Copyright 1987, 1989, 1992 Free Software Foundation, Inc. */
/* OBSOLETE  */
/* OBSOLETE    This file is part of GDB. */
/* OBSOLETE  */
/* OBSOLETE    This program is free software; you can redistribute it and/or modify */
/* OBSOLETE    it under the terms of the GNU General Public License as published by */
/* OBSOLETE    the Free Software Foundation; either version 2 of the License, or */
/* OBSOLETE    (at your option) any later version. */
/* OBSOLETE  */
/* OBSOLETE    This program is distributed in the hope that it will be useful, */
/* OBSOLETE    but WITHOUT ANY WARRANTY; without even the implied warranty of */
/* OBSOLETE    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the */
/* OBSOLETE    GNU General Public License for more details. */
/* OBSOLETE  */
/* OBSOLETE    You should have received a copy of the GNU General Public License */
/* OBSOLETE    along with this program; if not, write to the Free Software */
/* OBSOLETE    Foundation, Inc., 59 Temple Place - Suite 330, */
/* OBSOLETE    Boston, MA 02111-1307, USA.  */ */
/* OBSOLETE  */
/* OBSOLETE #define HOST_BYTE_ORDER BIG_ENDIAN */
/* OBSOLETE  */
/* OBSOLETE /* This has not been tested on ISI's running BSD 4.2, but it will probably */
/* OBSOLETE    work.  */ */
/* OBSOLETE  */
/* OBSOLETE /* This is the amount to subtract from u.u_ar0 */
/* OBSOLETE    to get the offset in the core file of the register values.  */ */
/* OBSOLETE  */
/* OBSOLETE /*#define KERNEL_U_ADDR 0x10800000 */ */
/* OBSOLETE #define KERNEL_U_ADDR 0 */
/* OBSOLETE  */
/* OBSOLETE /* expects blockend to be u.u_ar0 */ */
/* OBSOLETE extern int rloc[];		/* Defined in isi-dep.c */ */
/* OBSOLETE #define REGISTER_U_ADDR(addr, blockend, regno)                  \ */
/* OBSOLETE {       blockend &= UPAGES*NBPG - 1;                            \ */
/* OBSOLETE 	if (regno < 18) addr = (int)blockend + rloc[regno]*4;  	\ */
/* OBSOLETE         else if (regno < 26) addr = (int) &((struct user *)0)->u_68881_regs \ */
/* OBSOLETE             + (regno - 18) * 12;                                \ */
/* OBSOLETE         else if (regno < 29) addr = (int) &((struct user *)0)->u_68881_regs \ */
/* OBSOLETE             + 8 * 12 + (regno - 26) * 4;                        \ */
/* OBSOLETE } */
/* OBSOLETE  */
/* OBSOLETE /* Interface definitions for kernel debugger KDB.  */ */
/* OBSOLETE  */
/* OBSOLETE /* Map machine fault codes into signal numbers. */
/* OBSOLETE    First subtract 0, divide by 4, then index in a table. */
/* OBSOLETE    Faults for which the entry in this table is 0 */
/* OBSOLETE    are not handled by KDB; the program's own trap handler */
/* OBSOLETE    gets to handle then.  */ */
/* OBSOLETE  */
/* OBSOLETE #define FAULT_CODE_ORIGIN 0 */
/* OBSOLETE #define FAULT_CODE_UNITS 4 */
/* OBSOLETE #define FAULT_TABLE    \ */
/* OBSOLETE { 0, 0, 0, 0, SIGTRAP, 0, 0, 0, \ */
/* OBSOLETE   0, SIGTRAP, 0, 0, 0, 0, 0, SIGKILL, \ */
/* OBSOLETE   0, 0, 0, 0, 0, 0, 0, 0, \ */
/* OBSOLETE   SIGILL } */
/* OBSOLETE  */
/* OBSOLETE /* Start running with a stack stretching from BEG to END. */
/* OBSOLETE    BEG and END should be symbols meaningful to the assembler. */
/* OBSOLETE    This is used only for kdb.  */ */
/* OBSOLETE  */
/* OBSOLETE #define INIT_STACK(beg, end)  \ */
/* OBSOLETE { asm (".globl end");         \ */
/* OBSOLETE   asm ("movl $ end, sp");      \ */
/* OBSOLETE   asm ("clrl fp"); } */
/* OBSOLETE  */
/* OBSOLETE /* Push the frame pointer register on the stack.  */ */
/* OBSOLETE #define PUSH_FRAME_PTR        \ */
/* OBSOLETE   asm ("movel fp, -(sp)"); */
/* OBSOLETE  */
/* OBSOLETE /* Copy the top-of-stack to the frame pointer register.  */ */
/* OBSOLETE #define POP_FRAME_PTR  \ */
/* OBSOLETE   asm ("movl (sp), fp"); */
/* OBSOLETE  */
/* OBSOLETE /* After KDB is entered by a fault, push all registers */
/* OBSOLETE    that GDB thinks about (all NUM_REGS of them), */
/* OBSOLETE    so that they appear in order of ascending GDB register number. */
/* OBSOLETE    The fault code will be on the stack beyond the last register.  */ */
/* OBSOLETE  */
/* OBSOLETE #define PUSH_REGISTERS        \ */
/* OBSOLETE { asm ("clrw -(sp)");	      \ */
/* OBSOLETE   asm ("pea 10(sp)");	      \ */
/* OBSOLETE   asm ("movem $ 0xfffe,-(sp)"); } */
/* OBSOLETE  */
/* OBSOLETE /* Assuming the registers (including processor status) have been */
/* OBSOLETE    pushed on the stack in order of ascending GDB register number, */
/* OBSOLETE    restore them and return to the address in the saved PC register.  */ */
/* OBSOLETE  */
/* OBSOLETE #define POP_REGISTERS          \ */
/* OBSOLETE { asm ("subil $8,28(sp)");     \ */
/* OBSOLETE   asm ("movem (sp),$ 0xffff"); \ */
/* OBSOLETE   asm ("rte"); } */
 

Compare with Previous | Blame | View Log

powered by: WebSVN 2.1.0

© copyright 1999-2024 OpenCores.org, equivalent to Oliscience, all rights reserved. OpenCores®, registered trademark.