URL
https://opencores.org/ocsvn/or1k/or1k/trunk
Subversion Repositories or1k
[/] [or1k/] [trunk/] [insight/] [include/] [opcode/] [arm.h] - Rev 578
Go to most recent revision | Compare with Previous | Blame | View Log
/* ARM opcode list. Copyright 1989, 1991 Free Software Foundation, Inc. This file is part of GDB and GAS. GDB and GAS are free software; you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free Software Foundation; either version 1, or (at your option) any later version. GDB and GAS are distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for more details. You should have received a copy of the GNU General Public License along with GDB or GAS; see the file COPYING. If not, write to the Free Software Foundation, 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. */ /* types of instruction (encoded in bits 26 and 27 of the instruction) */ #define TYPE_ARITHMETIC 0 #define TYPE_LDR_STR 1 #define TYPE_BLOCK_BRANCH 2 #define TYPE_SWI 3 /* bit 25 decides whether an instruction is a block move or a branch */ #define SUBTYPE_BLOCK 0 #define SUBTYPE_BRANCH 1 /* codes to distinguish the arithmetic instructions */ #define OPCODE_AND 0 #define OPCODE_EOR 1 #define OPCODE_SUB 2 #define OPCODE_RSB 3 #define OPCODE_ADD 4 #define OPCODE_ADC 5 #define OPCODE_SBC 6 #define OPCODE_RSC 7 #define OPCODE_TST 8 #define OPCODE_TEQ 9 #define OPCODE_CMP 10 #define OPCODE_CMN 11 #define OPCODE_ORR 12 #define OPCODE_MOV 13 #define OPCODE_BIC 14 #define OPCODE_MVN 15 /* condition codes */ #define COND_EQ 0 #define COND_NE 1 #define COND_CS 2 #define COND_CC 3 #define COND_MI 4 #define COND_PL 5 #define COND_VS 6 #define COND_VC 7 #define COND_HI 8 #define COND_LS 9 #define COND_GE 10 #define COND_LT 11 #define COND_GT 12 #define COND_LE 13 #define COND_AL 14 #define COND_NV 15 /* Describes the format of an ARM machine instruction */ struct generic_fmt { unsigned rest :25; /* the rest of the instruction */ unsigned subtype :1; /* used to decide between block and branch */ unsigned type :2; /* one of TYPE_* */ unsigned cond :4; /* one of COND_* defined above */ }; struct arith_fmt { unsigned operand2 :12; /* #nn or rn or rn shift #m or rn shift rm */ unsigned dest :4; /* place where the answer goes */ unsigned operand1 :4; /* first operand to instruction */ unsigned set :1; /* == 1 means set processor flags */ unsigned opcode :4; /* one of OPCODE_* defined above */ unsigned immed :1; /* operand2 is an immediate value */ unsigned type :2; /* == TYPE_ARITHMETIC */ unsigned cond :4; /* one of COND_* defined above */ }; struct ldr_str_fmt { unsigned offset :12; /* #nn or rn or rn shift #m */ unsigned reg :4; /* destination for LDR, source for STR */ unsigned base :4; /* base register */ unsigned is_load :1; /* == 1 for LDR */ unsigned writeback :1; /* == 1 means write back (base+offset) into base */ unsigned byte :1; /* == 1 means byte access else word */ unsigned up :1; /* == 1 means add offset else subtract it */ unsigned pre_index :1; /* == 1 means [a,b] form else [a],b form */ unsigned immed :1; /* == 0 means immediate offset */ unsigned type :2; /* == TYPE_LDR_STR */ unsigned cond :4; /* one of COND_* defined above */ }; struct block_fmt { unsigned mask :16; /* register mask */ unsigned base :4; /* register used as base of move */ unsigned is_load :1; /* == 1 for LDM */ unsigned writeback :1; /* == 1 means update base after move */ unsigned set :1; /* == 1 means set flags in pc if included in mask */ unsigned increment :1; /* == 1 means increment base register */ unsigned before :1; /* == 1 means inc/dec before each move */ unsigned is_block :1; /* == SUBTYPE_BLOCK */ unsigned type :2; /* == TYPE_BLOCK_BRANCH */ unsigned cond :4; /* one of COND_* defined above */ }; struct branch_fmt { unsigned dest :24; /* destination of the branch */ unsigned link :1; /* branch with link (function call) */ unsigned is_branch :1; /* == SUBTYPE_BRANCH */ unsigned type :2; /* == TYPE_BLOCK_BRANCH */ unsigned cond :4; /* one of COND_* defined above */ }; #define ROUND_N 0 #define ROUND_P 1 #define ROUND_M 2 #define ROUND_Z 3 #define FLOAT2_MVF 0 #define FLOAT2_MNF 1 #define FLOAT2_ABS 2 #define FLOAT2_RND 3 #define FLOAT2_SQT 4 #define FLOAT2_LOG 5 #define FLOAT2_LGN 6 #define FLOAT2_EXP 7 #define FLOAT2_SIN 8 #define FLOAT2_COS 9 #define FLOAT2_TAN 10 #define FLOAT2_ASN 11 #define FLOAT2_ACS 12 #define FLOAT2_ATN 13 #define FLOAT3_ADF 0 #define FLOAT3_MUF 1 #define FLOAT3_SUF 2 #define FLOAT3_RSF 3 #define FLOAT3_DVF 4 #define FLOAT3_RDF 5 #define FLOAT3_POW 6 #define FLOAT3_RPW 7 #define FLOAT3_RMF 8 #define FLOAT3_FML 9 #define FLOAT3_FDV 10 #define FLOAT3_FRD 11 #define FLOAT3_POL 12 struct float2_fmt { unsigned operand2 :3; /* second operand */ unsigned immed :1; /* == 1 if second operand is a constant */ unsigned pad1 :1; /* == 0 */ unsigned rounding :2; /* ROUND_* */ unsigned is_double :1; /* == 1 if precision is double (only if not extended) */ unsigned pad2 :4; /* == 1 */ unsigned dest :3; /* destination */ unsigned is_2_op :1; /* == 1 if 2 operand ins */ unsigned operand1 :3; /* first operand (only of is_2_op == 0) */ unsigned is_extended :1; /* == 1 if precision is extended */ unsigned opcode :4; /* FLOAT2_* or FLOAT3_* depending on is_2_op */ unsigned must_be_2 :2; /* == 2 */ unsigned type :2; /* == TYPE_SWI */ unsigned cond :4; /* COND_* */ }; struct swi_fmt { unsigned argument :24; /* argument to SWI (syscall number) */ unsigned must_be_3 :2; /* == 3 */ unsigned type :2; /* == TYPE_SWI */ unsigned cond :4; /* one of COND_* defined above */ }; union insn_fmt { struct generic_fmt generic; struct arith_fmt arith; struct ldr_str_fmt ldr_str; struct block_fmt block; struct branch_fmt branch; struct swi_fmt swi; unsigned long ins; }; struct opcode { unsigned long value, mask; /* recognise instruction if (op&mask)==value */ char *assembler; /* how to disassemble this instruction */ }; /* format of the assembler string : %% % %<bitfield>d print the bitfield in decimal %<bitfield>x print the bitfield in hex %<bitfield>r print as an ARM register %<bitfield>f print a floating point constant if >7 else an fp register %c print condition code (always bits 28-31) %P print floating point precision in arithmetic insn %Q print floating point precision in ldf/stf insn %R print floating point rounding mode %<bitnum>'c print specified char iff bit is one %<bitnum>`c print specified char iff bit is zero %<bitnum>?ab print a if bit is one else print b %p print 'p' iff bits 12-15 are 15 %o print operand2 (immediate or register + shift) %a print address for ldr/str instruction %b print branch destination %A print address for ldc/stc/ldf/stf instruction %m print register mask for ldm/stm instruction */ static struct opcode opcodes[] = { /* ARM instructions */ 0x00000090, 0x0fe000f0, "mul%20's %12-15r, %16-19r, %0-3r", 0x00200090, 0x0fe000f0, "mla%20's %12-15r, %16-19r, %0-3r, %8-11r", 0x00000000, 0x0de00000, "and%c%20's %12-15r, %16-19r, %o", 0x00200000, 0x0de00000, "eor%c%20's %12-15r, %16-19r, %o", 0x00400000, 0x0de00000, "sub%c%20's %12-15r, %16-19r, %o", 0x00600000, 0x0de00000, "rsb%c%20's %12-15r, %16-19r, %o", 0x00800000, 0x0de00000, "add%c%20's %12-15r, %16-19r, %o", 0x00a00000, 0x0de00000, "adc%c%20's %12-15r, %16-19r, %o", 0x00c00000, 0x0de00000, "sbc%c%20's %12-15r, %16-19r, %o", 0x00e00000, 0x0de00000, "rsc%c%20's %12-15r, %16-19r, %o", 0x01000000, 0x0de00000, "tst%c%p %16-19r, %o", 0x01200000, 0x0de00000, "teq%c%p %16-19r, %o", 0x01400000, 0x0de00000, "cmp%c%p %16-19r, %o", 0x01600000, 0x0de00000, "cmn%c%p %16-19r, %o", 0x01800000, 0x0de00000, "orr%c%20's %12-15r, %16-19r, %o", 0x01a00000, 0x0de00000, "mov%c%20's %12-15r, %o", 0x01c00000, 0x0de00000, "bic%c%20's %12-15r, %16-19r, %o", 0x01e00000, 0x0de00000, "mvn%c%20's %12-15r, %o", 0x04000000, 0x0c100000, "str%c%22'b %12-15r, %a", 0x04100000, 0x0c100000, "ldr%c%22'b %12-15r, %a", 0x08000000, 0x0e100000, "stm%c%23?id%24?ba %16-19r%22`!, %m", 0x08100000, 0x0e100000, "ldm%c%23?id%24?ba %16-19r%22`!, %m%22'^", 0x0a000000, 0x0e000000, "b%c%24'l %b", 0x0f000000, 0x0f000000, "swi%c %0-23x", /* Floating point coprocessor instructions */ 0x0e000100, 0x0ff08f10, "adf%c%P%R %12-14f, %16-18f, %0-3f", 0x0e100100, 0x0ff08f10, "muf%c%P%R %12-14f, %16-18f, %0-3f", 0x0e200100, 0x0ff08f10, "suf%c%P%R %12-14f, %16-18f, %0-3f", 0x0e300100, 0x0ff08f10, "rsf%c%P%R %12-14f, %16-18f, %0-3f", 0x0e400100, 0x0ff08f10, "dvf%c%P%R %12-14f, %16-18f, %0-3f", 0x0e500100, 0x0ff08f10, "rdf%c%P%R %12-14f, %16-18f, %0-3f", 0x0e600100, 0x0ff08f10, "pow%c%P%R %12-14f, %16-18f, %0-3f", 0x0e700100, 0x0ff08f10, "rpw%c%P%R %12-14f, %16-18f, %0-3f", 0x0e800100, 0x0ff08f10, "rmf%c%P%R %12-14f, %16-18f, %0-3f", 0x0e900100, 0x0ff08f10, "fml%c%P%R %12-14f, %16-18f, %0-3f", 0x0ea00100, 0x0ff08f10, "fdv%c%P%R %12-14f, %16-18f, %0-3f", 0x0eb00100, 0x0ff08f10, "frd%c%P%R %12-14f, %16-18f, %0-3f", 0x0ec00100, 0x0ff08f10, "pol%c%P%R %12-14f, %16-18f, %0-3f", 0x0e008100, 0x0ff08f10, "mvf%c%P%R %12-14f, %0-3f", 0x0e108100, 0x0ff08f10, "mnf%c%P%R %12-14f, %0-3f", 0x0e208100, 0x0ff08f10, "abs%c%P%R %12-14f, %0-3f", 0x0e308100, 0x0ff08f10, "rnd%c%P%R %12-14f, %0-3f", 0x0e408100, 0x0ff08f10, "sqt%c%P%R %12-14f, %0-3f", 0x0e508100, 0x0ff08f10, "log%c%P%R %12-14f, %0-3f", 0x0e608100, 0x0ff08f10, "lgn%c%P%R %12-14f, %0-3f", 0x0e708100, 0x0ff08f10, "exp%c%P%R %12-14f, %0-3f", 0x0e808100, 0x0ff08f10, "sin%c%P%R %12-14f, %0-3f", 0x0e908100, 0x0ff08f10, "cos%c%P%R %12-14f, %0-3f", 0x0ea08100, 0x0ff08f10, "tan%c%P%R %12-14f, %0-3f", 0x0eb08100, 0x0ff08f10, "asn%c%P%R %12-14f, %0-3f", 0x0ec08100, 0x0ff08f10, "acs%c%P%R %12-14f, %0-3f", 0x0ed08100, 0x0ff08f10, "atn%c%P%R %12-14f, %0-3f", 0x0e000110, 0x0ff00f1f, "flt%c%P%R %16-18f, %12-15r", 0x0e100110, 0x0fff0f98, "fix%c%R %12-15r, %0-2f", 0x0e200110, 0x0fff0fff, "wfs%c %12-15r", 0x0e300110, 0x0fff0fff, "rfs%c %12-15r", 0x0e400110, 0x0fff0fff, "wfc%c %12-15r", 0x0e500110, 0x0fff0fff, "rfc%c %12-15r", 0x0e90f110, 0x0ff8fff0, "cmf%c %16-18f, %0-3f", 0x0eb0f110, 0x0ff8fff0, "cnf%c %16-18f, %0-3f", 0x0ed0f110, 0x0ff8fff0, "cmfe%c %16-18f, %0-3f", 0x0ef0f110, 0x0ff8fff0, "cnfe%c %16-18f, %0-3f", 0x0c000100, 0x0e100f00, "stf%c%Q %12-14f, %A", 0x0c100100, 0x0e100f00, "ldf%c%Q %12-14f, %A", /* Generic coprocessor instructions */ 0x0e000000, 0x0f000010, "cdp%c %8-11d, %20-23d, cr%12-15d, cr%16-19d, cr%0-3d, {%5-7d}", 0x0e000010, 0x0f100010, "mrc%c %8-11d, %21-23d, %12-15r, cr%16-19d, cr%0-3d, {%5-7d}", 0x0e100010, 0x0f100010, "mcr%c %8-11d, %21-23d, %12-15r, cr%16-19d, cr%0-3d, {%5-7d}", 0x0c000000, 0x0e100000, "stc%c%22`l %8-11d, cr%12-15d, %A", 0x0c100000, 0x0e100000, "ldc%c%22`l %8-11d, cr%12-15d, %A", /* the rest */ 0x00000000, 0x00000000, "undefined instruction %0-31x", }; #define N_OPCODES (sizeof opcodes / sizeof opcodes[0])
Go to most recent revision | Compare with Previous | Blame | View Log