OpenCores
URL https://opencores.org/ocsvn/or1k/or1k/trunk

Subversion Repositories or1k

[/] [or1k/] [trunk/] [insight/] [itcl/] [itk/] [win/] [configure.in] - Rev 1765

Compare with Previous | Blame | View Log

dnl     This file is an input file used by the GNU "autoconf" program to
dnl     generate the file "configure", which is run during Tk installation
dnl     to configure the system for the local environment.

AC_PREREQ(2.5)

AC_INIT(../generic/itk.h)

AC_CONFIG_AUX_DIR(../../../)
AC_CANONICAL_HOST

AC_PROG_RANLIB

AC_PROG_CC
AC_OBJEXT
AC_CHECK_TOOL(NM, nm, nm)
AC_SUBST(NM)
AC_CHECK_TOOL(AS, as, as)
AC_SUBST(AS)
AC_CHECK_TOOL(LD, ld, ld)
AC_SUBST(LD)
AC_CHECK_TOOL(DLLTOOL, dlltool, dlltool)
AC_SUBST(DLLTOOL)
AC_CHECK_TOOL(WINDRES, windres, windres)
AC_SUBST(WINDRES)

AC_PROG_INSTALL

# needed for the subtle differences between cygwin and mingw32
case "${host}" in
*-*-cygwin*)
        DLL_LDLIBS=-lcygwin
        DLL_LDFLAGS='-nostartfiles -Wl,--dll'
        ;;
*-*-mingw32*)
        DLL_LDLIBS=
        DLL_LDFLAGS='-mdll'
        ;;
esac
AC_SUBST(DLL_LDFLAGS)
AC_SUBST(DLL_LDLIBS)

ITCL_VERSION=3.0
ITCL_MAJOR_VERSION=3
ITCL_MINOR_VERSION=0
VERSION=${ITCL_MAJOR_VERSION}${ITCL_MINOR_VERSION}

if test "${prefix}" = "NONE"; then
    prefix=/usr/local
fi
if test "${exec_prefix}" = "NONE"; then
    exec_prefix=$prefix
fi

# -----------------------------------------------------------------------
#   Set up a new default --prefix.  If a previous installation of
#   [incr Tcl] can be found searching $PATH use that directory.
# -----------------------------------------------------------------------

AC_PREFIX_DEFAULT(/usr/local)
AC_PREFIX_PROGRAM(itclsh)

# -----------------------------------------------------------------------
BUILD_DIR=`pwd`
ITK_SRC_DIR=`cd $srcdir/..; pwd`

if ! test "$GCC" = yes; then
    tmp="`cygpath --windows $ITK_SRC_DIR`"
    ITK_SRC_DIR="`echo $tmp | sed -e s#\\\\\\\\#/#g`"
fi

cd ${BUILD_DIR}

AC_ARG_ENABLE(gcc, [  --enable-gcc            allow use of gcc if available],
    [itk_ok=$enableval], [itk_ok=no])
if test "$itk_ok" = "yes"; then
    AC_PROG_CC
else
    CC=${CC-cc}
AC_SUBST(CC)
fi
AC_HAVE_HEADERS(unistd.h limits.h)


#--------------------------------------------------------------------
#   See if there was a command-line option for where Tcl is;  if
#   not, assume that its top-level directory is a sibling of ours.
# CYGNUS LOCAL - Actually Tcl & Tk are siblings of the itcl directory
# that contains itcl & itk & iwidgets.
#--------------------------------------------------------------------

AC_ARG_WITH(tcl, [  --with-tcl=DIR          use Tcl 8.0 binaries from DIR],
        TCL_BIN_DIR=$withval, TCL_BIN_DIR=`cd ../../../tcl/win; pwd`)

if test ! -f $TCL_BIN_DIR/../unix/tclConfig.sh; then
    TCL_BIN_DIR=`cd ../../../tcl8.1/win;pwd`
fi

if test ! -f $TCL_BIN_DIR/../unix/tclConfig.sh; then
    AC_MSG_ERROR(There's no tclConfig.sh in $TCL_BIN_DIR;  perhaps you didn't specify the Tcl *build* directory (not the toplevel Tcl directory) or you forgot to configure Tcl?)
fi

#--------------------------------------------------------------------
#   Read in configuration information generated by Tcl for shared
#   libraries, and arrange for it to be substituted into our
#   Makefile.
#--------------------------------------------------------------------

file=$TCL_BIN_DIR/../unix/tclConfig.sh
. $file

dnl CFLAGS=$TCL_CFLAGS

SHLIB_CFLAGS=$TCL_SHLIB_CFLAGS
SHLIB_LD=$TCL_SHLIB_LD
SHLIB_LD_LIBS=$TCL_SHLIB_LD_LIBS
SHLIB_SUFFIX=$TCL_SHLIB_SUFFIX
SHLIB_VERSION=$TCL_SHLIB_VERSION
DL_LIBS=$TCL_DL_LIBS
LD_FLAGS=$TCL_LD_FLAGS
ITK_LD_SEARCH_FLAGS=$TCL_LD_SEARCH_FLAGS

#--------------------------------------------------------------------
#   See if there was a command-line option for where Tk is;  if
#   not, assume that its top-level directory is a sibling of ours.
# CYGNUS LOCAL - actually these are one level higher in the CYGNUS tree.
#--------------------------------------------------------------------

AC_ARG_WITH(tcl, [  --with-tk=DIR          use Tk 8.0 binaries from DIR],
        TK_BIN_DIR=$withval, TK_BIN_DIR=`cd ../../../tk/win; pwd`)

if test ! -f $TK_BIN_DIR/../unix/tkConfig.sh; then
    TK_BIN_DIR=`cd ../../../tk8.1/win;pwd`
fi

if test ! -f $TK_BIN_DIR/../unix/tkConfig.sh; then
    AC_MSG_ERROR(There's no tkConfig.sh in $TK_BIN_DIR;  perhaps you didn't specify the Tk *build* directory (not the toplevel Tcl directory) or you forgot to configure Tcl?)
fi

file=$TK_BIN_DIR/../unix/tkConfig.sh
. $file

if ! test "$GCC" = yes; then
    tmp="`cygpath --windows $TK_BIN_DIR`"
    TK_BIN_DIR="`echo $tmp | sed -e s#\\\\\\\\#/#g`"
fi


#--------------------------------------------------------------------
#   See if there was a command-line option for where [incr Tcl] is.
#   If not, assume that its top-level directory is a sibling of ours.
#--------------------------------------------------------------------

AC_ARG_WITH(itcl, [  --with-itcl=DIR          use Itcl 3.0 binaries from DIR],
        ITCL_BIN_DIR=$withval, ITCL_BIN_DIR=`cd ../../itcl/win; pwd`)
if test ! -d $ITCL_BIN_DIR; then
    AC_MSG_ERROR(Itcl directory $ITCL_BIN_DIR doesn't exist)
fi
if test ! -f $ITCL_BIN_DIR/Makefile; then
    AC_MSG_ERROR(There's no Makefile in $ITCL_BIN_DIR;  perhaps you didn't specify the Itcl *build* directory (not the toplevel Itcl directory) or you forgot to configure Itcl?)
fi

file=$ITCL_BIN_DIR/../itclConfig.sh
. $file


AC_MSG_CHECKING([whether C compiler is gcc])
AC_CACHE_VAL(itcl_cv_prog_gcc, [
    AC_EGREP_CPP(_cc_is_gcc_, [
#ifdef __GNUC__
_cc_is_gcc_
#endif
],      [itcl_cv_prog_gcc=yes], [itcl_cv_prog_gcc=no])])
AC_MSG_RESULT([$itcl_cv_prog_gcc])

if test -z "$CFLAGS" ; then
    CFLAGS="-O"
fi
if test "$itcl_cv_prog_gcc" = "yes" ; then
    CFLAGS="$CFLAGS -Wshadow -Wtraditional -Wall"
fi

AC_MSG_CHECKING([default compiler flags])
AC_ARG_WITH(cflags, [  --with-cflags=FLAGS     set compiler flags to FLAGS],
    [CFLAGS="$with_cflags"])

AC_MSG_RESULT([$CFLAGS])

#--------------------------------------------------------------------
#   Supply a substitute for stdlib.h if it doesn't define strtol,
#   strtoul, or strtod (which it doesn't in some versions of SunOS).
#--------------------------------------------------------------------

AC_MSG_CHECKING(stdlib.h)
AC_HEADER_EGREP(strtol, stdlib.h, itk_ok=yes, itk_ok=no)
AC_HEADER_EGREP(strtoul, stdlib.h, , itk_ok=no)
AC_HEADER_EGREP(strtod, stdlib.h, , itk_ok=no)
if test $itk_ok = no; then
    AC_DEFINE(NO_STDLIB_H)
fi
AC_MSG_RESULT($itk_ok)

#--------------------------------------------------------------------
#   Check for various typedefs and provide substitutes if
#   they don't exist.
#--------------------------------------------------------------------

AC_MODE_T
AC_PID_T
AC_SIZE_T
AC_UID_T

# -----------------------------------------------------------------------
#   C compiler and debugging flags
# -----------------------------------------------------------------------
AC_MSG_CHECKING([which C compiler])
if test -z "$CC" ; then
    CC="cc"
fi
AC_ARG_WITH(cc, [  --with-cc=CC            set C compiler to CC],
    [CC=$with_cc])
AC_MSG_RESULT([$CC])
AC_SUBST(CC)

AC_PROG_CPP

#--------------------------------------------------------------------
#   Supply substitutes for missing POSIX header files.
#   Replacements are handled in "tclInt.h" which we include here.
#--------------------------------------------------------------------

AC_CHECK_HEADER(limits.h, , AC_DEFINE(NO_LIMITS_H))
AC_CHECK_HEADER(stdlib.h, tcl_ok=1, tcl_ok=0)
AC_EGREP_HEADER(strtol, stdlib.h, , tcl_ok=0)
AC_EGREP_HEADER(strtoul, stdlib.h, , tcl_ok=0)
AC_EGREP_HEADER(strtod, stdlib.h, , tcl_ok=0)
if test $tcl_ok = 0; then
    AC_DEFINE(NO_STDLIB_H)
fi
AC_CHECK_HEADER(string.h, tcl_ok=1, tcl_ok=0)
AC_EGREP_HEADER(strstr, string.h, , tcl_ok=0)
AC_EGREP_HEADER(strerror, string.h, , tcl_ok=0)
if test $tcl_ok = 0; then
    AC_DEFINE(NO_STRING_H)
fi

#--------------------------------------------------------------------
#   Check for various typedefs and provide substitutes if
#   they don't exist.
#--------------------------------------------------------------------

AC_MODE_T
AC_PID_T
AC_SIZE_T
AC_UID_T

#--------------------------------------------------------------------
#   Locate the X11 header files and the X11 library archive.  Try
#   the ac_path_x macro first, but if it doesn't find the X stuff
#   (e.g. because there's no xmkmf program) then check through
#   a list of possible directories.  Under some conditions the
#   autoconf macro will return an include directory that contains
#   no include files, so double-check its result just to be safe.
#--------------------------------------------------------------------

AC_PATH_X
not_really_there=""
if test "$no_x" = ""; then
    if test "$x_includes" = ""; then
        AC_TRY_CPP([#include <X11/XIntrinsic.h>], , not_really_there="yes")
    else
        if test ! -r $x_includes/X11/Intrinsic.h; then
            not_really_there="yes"
        fi
    fi
fi
if test "$no_x" = "yes" -o "$not_really_there" = "yes"; then
    echo checking for X11 header files
    XINCLUDES="# no special path needed"
    AC_TRY_CPP([#include <X11/Intrinsic.h>], , XINCLUDES="nope")
    if test "$XINCLUDES" = nope; then
        dirs="/usr/unsupported/include /usr/local/include /usr/X386/include /usr/X11R6/include /usr/include/X11R6 /usr/X11R5/include /usr/include/X11R5 /usr/include/X11R4 /usr/openwin/include /usr/X11/include /usr/sww/include"
        for i in $dirs ; do
            if test -r $i/X11/Intrinsic.h; then
                XINCLUDES=" -I$i"
            fi
        done
    fi
else
    if test "$x_includes" != ""; then
        XINCLUDES=-I$x_includes
    else
        XINCLUDES="# no special path needed"
    fi
fi
if test "$XINCLUDES" = nope; then
  echo "Warning:  couldn't find any X11 include files."
  XINCLUDES="# no include files found"
fi
AC_SUBST(XINCLUDES)

if test "$no_x" = yes; then
    XLIBSW=nope
    if test "$XLIBSW" = nope; then
        dirs="/usr/unsupported/lib /usr/local/lib /usr/X386/lib /usr/X11R6/lib /usr/lib/X11R6 /usr/X11R5/lib /usr/lib/X11R5 /usr/lib/X11R4 /usr/openwin/lib /usr/X11/lib /usr/sww/X11/lib"
        for i in $dirs ; do
            if test -r $i/libX11.a; then
                XLIBSW="-L$i -lX11"
            fi
        done
    fi
else
    if test "$x_libraries" = ""; then
        XLIBSW=-lX11
    else
        XLIBSW="-L$x_libraries -lX11"
    fi
fi
if test "$XLIBSW" = nope ; then
    AC_CHECK_LIB(Xwindow, XCreateWindow, XLIBSW=-lXwindow)
fi
if test "$XLIBSW" = nope ; then
    AC_MSG_RESULT(couldn't find any!  Using -lX11.)
    XLIBSW=-lX11
fi

#--------------------------------------------------------------------
#   If the X library binaries are in a non-standard directory, and
#   if a mechanism such as -R is available on this platform for
#   specifying a runtime search path for shared libraries, add the X
#   library location into that search path.
#--------------------------------------------------------------------

if test "$x_libraries" != "" -a "$ITK_LD_SEARCH_FLAGS" != ""; then
    itk_tmp=`sed -e "s|\\\${LIB_RUNTIME_DIR}|$x_libraries|" << EOF
$ITK_LD_SEARCH_FLAGS
EOF`
    ITK_LD_SEARCH_FLAGS="$ITK_LD_SEARCH_FLAGS $itk_tmp"
fi

#--------------------------------------------------------------------
#   Check for the existence of various libraries.  The order here
#   is important, so that then end up in the right order in the
#   command line generated by make.  The -lsocket and -lnsl libraries
#   require a couple of special tricks:
#   1. Use "connect" and "accept" to check for -lsocket, and
#      "gethostbyname" to check for -lnsl.
#   2. Use each function name only once:  can't redo a check because
#      autoconf caches the results of the last check and won't redo it.
#   3. Use -lnsl and -lsocket only if they supply procedures that
#      aren't already present in the normal libraries.  This is because
#      IRIX 5.2 has libraries, but they aren't needed and they're
#      bogus:  they goof up name resolution if used.
#   4. On some SVR4 systems, can't use -lsocket without -lnsl too.
#      To get around this problem, check for both libraries together
#      if -lsocket doesn't work by itself.
#--------------------------------------------------------------------

AC_CHECK_LIB(Xbsd, main, [LIBS="$LIBS -lXbsd"])

itk_checkBoth=0
AC_CHECK_FUNC(connect, itk_checkSocket=0, itk_checkSocket=1)
if test "$itk_checkSocket" = 1; then
    AC_CHECK_LIB(socket, main, LIBS="$LIBS -lsocket", itk_checkBoth=1)
fi
if test "$itk_checkBoth" = 1; then
    itk_oldLibs=$LIBS
    LIBS="$LIBS -lsocket -lnsl"
    AC_CHECK_FUNC(accept, itk_checkNsl=0, [LIBS=$itk_oldLibs])
fi
AC_CHECK_FUNC(gethostbyname, , AC_CHECK_LIB(nsl, main, [LIBS="$LIBS -lnsl"]))

#--------------------------------------------------------------------
# One more check related to the X libraries.  The standard releases
# of Ultrix don't support the "xauth" mechanism, so send won't work
# unless TK_NO_SECURITY is defined.  However, there are usually copies
# of the MIT X server available as well, which do support xauth.
# Check for the MIT stuff and use it if it exists.
#
# Note: can't use ac_check_lib macro (at least, not in Autoconf 2.1)
# because it can't deal with the "-" in the library name.
#--------------------------------------------------------------------

if test -d /usr/include/mit ; then
    AC_MSG_CHECKING([MIT X libraries])
    itk_oldCFlags=$CFLAGS
    CFLAGS="$CFLAGS -I/usr/include/mit"
    itk_oldLibs=$LIBS
    LIBS="$LIBS -lX11-mit"
    AC_TRY_LINK([
        #include <X11/Xlib.h>
    ], [
        XOpenDisplay(0);
    ], [
        AC_MSG_RESULT(yes)
        XLIBSW="-lX11-mit"
        XINCLUDES="-I/usr/include/mit"
    ], AC_MSG_RESULT(no))
    CFLAGS=$itk_oldCFlags
    LIBS=$itk_oldLibs
fi

#--------------------------------------------------------------------
#   On a few very rare systems, all of the libm.a stuff is
#   already in libc.a.  Set compiler flags accordingly.
#   Also, Linux requires the "ieee" library for math to
#   work right (and it must appear before "-lm").
#--------------------------------------------------------------------

MATH_LIBS=""
AC_CHECK_FUNC(sin, , MATH_LIBS="-lm")
AC_CHECK_LIB(ieee, main, [MATH_LIBS="-lieee $MATH_LIBS"])

#--------------------------------------------------------------------
#   If this system doesn't have a memmove procedure, use memcpy
#   instead.
#--------------------------------------------------------------------

AC_CHECK_FUNC(memmove, , [AC_DEFINE(memmove, memcpy)])

#--------------------------------------------------------------------
#   Figure out whether "char" is unsigned.  If so, set a
#   #define for __CHAR_UNSIGNED__.
#--------------------------------------------------------------------

#AC_C_CHAR_UNSIGNED

#--------------------------------------------------------------------
#   Under Solaris 2.4, strtod returns the wrong value for the
#   terminating character under some conditions.  Check for this
#   and if the problem exists use a substitute procedure
#   "fixstrtod" (provided by Tcl) that corrects the error.
#--------------------------------------------------------------------

AC_CHECK_FUNC(strtod, itk_strtod=1, itk_strtod=0)
if test "$itk_strtod" = 1; then
    AC_MSG_CHECKING([for Solaris 2.4 strtod bug])
    AC_TRY_RUN([
        extern double strtod();
        int main()
        {
            char *string = "NaN";
            char *term;
            strtod(string, &term);
            if ((term != string) && (term[-1] == 0)) {
                exit(1);
            }
            exit(0);
        }], itk_ok=1, itk_ok=0, itk_ok=0)
    if test "$itk_ok" = 1; then
        AC_MSG_RESULT(ok)
    else
        AC_MSG_RESULT(buggy)
        AC_DEFINE(strtod, fixstrtod)
    fi
fi

#--------------------------------------------------------------------
# If we are building with cygwin, we need one set of library names,
# otherwise, we need the Source-Navigator set.
#--------------------------------------------------------------------



if test "${TCL_LIB_VERSIONS_OK}" = "ok"; then
    CYGITKLIBSPEC=itk${VERSION}
else
    CYGITKLIBSPEC="itk`echo ${VERSION} | tr -d .`"
fi
CYGITKLIB=lib${CYGITKLIBSPEC}.a
CYGITKDLL=cygitk${VERSION}.dll
CYGITKWISH=cygitkwish${VERSION}.exe
CYGITKDEF=itkcyg.def
CYGITKTEST=cygitktest.exe
CYGIMPORTLIB=cygitk${VERSION}.lib
CYGITKRES=cygitk.o
CYGITKWISHRES=cygitkwish.o

SNITKLIBSPEC=itk30.lib
SNITKLIB=${SNITKLIBSPEC}
SNITKDLL=snitk30.dll
SNITKWISH=snitkwish30.exe
SNITKDEF=itksn.def
SNITKTEST=snitktest.exe
SNIMPORTLIB=snitk30.lib
SNITKRES=snitk.obj
SNITKWISHRES=snitksh.obj

if test "$GCC" = yes; then
ITKLIBSPEC=${CYGITKLIBSPEC}
ITKLIB=${CYGITKLIB}
ITKDLL=${CYGITKDLL}
ITKWISH=${CYGITKWISH}
ITKDEF=${CYGITKDEF}
ITKTEST=${CYGITKTEST}
ITKIMPORTLIB=${CYGIMPORTLIB}
ITKRES=${CYGITKRES}
ITKWISHRES=${CYGITKWISHRES}
else
ITKLIBSPEC=${SNITKLIBSPEC}
ITKLIB=${SNITKLIB}
ITKDLL=${SNITKDLL}
ITKWISH=${SNITKWISH}
ITKDEF=${SNITKDEF}
ITKTEST=${SNITKTEST}
ITKIMPORTLIB=${SNIMPORTLIB}
ITKRES=${SNITKRES}
ITKWISHRES=${SNITKWISHRES}
fi

#--------------------------------------------------------------------
#   The statements below define a collection of symbols related to
#   building libitk as a shared library instead of a static library.
#--------------------------------------------------------------------

AC_ARG_ENABLE(shared,
    [  --enable-shared         build libitk as a shared library],
    [ok=$enableval], [ok=no])
if test "$ok" = "yes" -a "${SHLIB_SUFFIX}" != ""; then
    ITK_SHLIB_CFLAGS="${SHLIB_CFLAGS}"
    eval "ITK_LIB_FILE=libitk${VERSION}${SHLIB_SUFFIX}"
    ITK_PKG_FILE="[[file join [file dirname \$dir] ${ITK_LIB_FILE}]]"
    MAKE_LIB="\${SHLIB_LD} -o ${ITK_LIB_FILE} ${LIBS} \${OBJS} ${SHLIB_LD_LIBS}"
    RANLIB=":"
else
    ITK_SHLIB_CFLAGS=""
    eval "ITK_LIB_FILE=libitk${VERSION}.a"
    ITK_PKG_FILE=""
    MAKE_LIB="ar cr ${ITK_LIB_FILE} \${OBJS}"
fi

# Note:  in the following variable, it's important to use the absolute
# path name of the Tcl directory rather than "..":  this is because
# AIX remembers this path and will attempt to use it at run-time to look
# up the Tcl library.

if test "$GCC" = yes; then
    ITK_BUILD_LIB_SPEC="-L`pwd` -l${ITKLIBSPEC}"
    ITK_LIB_SPEC="-L${exec_prefix}/lib/ITK -l{ITKLIBSPEC}"
    ITK_LIB_FULL_PATH="`pwd`/${ITKLIB}"
else
    tmp="`pwd`/${ITKLIB}"
    tmp2="`cygpath --windows $tmp`"
    ITK_BUILD_LIB_SPEC="`echo $tmp2 | sed -e s#\\\\\\\\#/#g`"
    ITK_LIB_FULL_PATH=${ITK_BUILD_LIB_SPEC}
    tmp="${exec_prefix}/lib/ITK/${ITKLIB}"
    tmp2="`cygpath --windows $tmp`"
    ITK_LIB_SPEC="`echo $tmp2 | sed -e s#\\\\\\\\#/#g`"
fi

if test "$GCC" = yes; then
    BASELIBS="-lkernel32 $optlibs -ladvapi32 -luser32"
    WINLIBS="-lgdi32 -lcomdlg32 -lwinspool"
    LIBCDLL=
else
    BASELIBS="kernel32.lib advapi32.lib user32.lib"
    WINLIBS="gdi32.lib comdlg32.lib winspool.lib"
    LIBCDLL="msvcrt.lib oldnames.lib"
fi

AC_SUBST(CFLAGS)
AC_SUBST(DL_LIBS)
AC_SUBST(LD_FLAGS)
AC_SUBST(MATH_LIBS)
AC_SUBST(MAKE_LIB)
AC_SUBST(SHLIB_CFLAGS)
AC_SUBST(SHLIB_LD)
AC_SUBST(SHLIB_LD_LIBS)
AC_SUBST(SHLIB_SUFFIX)
AC_SUBST(SHLIB_VERSION)
AC_SUBST(TCL_BIN_DIR)
AC_SUBST(TCL_BUILD_LIB_SPEC)
AC_SUBST(TCL_SRC_DIR)
AC_SUBST(TCL_VERSION)
AC_SUBST(TCL_LIB_FILE)
AC_SUBST(TCL_LIB_FULL_PATH)
AC_SUBST(TK_BIN_DIR)
AC_SUBST(TK_BUILD_LIB_SPEC)
AC_SUBST(TK_SRC_DIR)
AC_SUBST(TK_VERSION)
AC_SUBST(TK_LIB_FILE)
AC_SUBST(TK_LIB_FULL_PATH)
AC_SUBST(ITCL_BIN_DIR)
AC_SUBST(ITCL_BUILD_LIB_SPEC)
AC_SUBST(ITCL_MAJOR_VERSION)
AC_SUBST(ITCL_MINOR_VERSION)
AC_SUBST(ITCL_SRC_DIR)
AC_SUBST(ITCL_VERSION)
AC_SUBST(ITCL_LIB_FILE)
AC_SUBST(ITCL_LIB_FULL_PATH)
AC_SUBST(ITK_BUILD_LIB_SPEC)
AC_SUBST(ITK_LD_SEARCH_FLAGS)
AC_SUBST(ITK_LIB_FILE)
AC_SUBST(ITK_LIB_FULL_PATH)
AC_SUBST(ITK_LIB_SPEC)
AC_SUBST(ITK_PKG_FILE)
AC_SUBST(ITK_SHLIB_CFLAGS)
AC_SUBST(ITK_SRC_DIR)
AC_SUBST(XINCLUDES)
AC_SUBST(XLIBSW)
AC_SUBST(CYGITKLIB)
AC_SUBST(CYGITKDLL)
AC_SUBST(CYGITKWISH)
AC_SUBST(CYGITKDEF)
AC_SUBST(CYGITKTEST)
AC_SUBST(CYGIMPORTLIB)
AC_SUBST(CYGITKRES)
AC_SUBST(CYGITKWISHRES)
AC_SUBST(SNITKLIB)
AC_SUBST(SNITKDLL)
AC_SUBST(SNITKWISH)
AC_SUBST(SNITKDEF)
AC_SUBST(SNITKTEST)
AC_SUBST(SNIMPORTLIB)
AC_SUBST(SNITKRES)
AC_SUBST(SNITKWISHRES)
AC_SUBST(ITKLIB)
AC_SUBST(ITKDLL)
AC_SUBST(ITKWISH)
AC_SUBST(ITKDEF)
AC_SUBST(ITKTEST)
AC_SUBST(ITKIMPORTLIB)
AC_SUBST(ITKRES)
AC_SUBST(ITKWISHRES)
AC_SUBST(BASELIBS)
AC_SUBST(WINLIBS)
AC_SUBST(LIBCDLL)

AC_OUTPUT(Makefile ../unix/pkgIndex.tcl ../itkConfig.sh)

Compare with Previous | Blame | View Log

powered by: WebSVN 2.1.0

© copyright 1999-2024 OpenCores.org, equivalent to Oliscience, all rights reserved. OpenCores®, registered trademark.