URL
https://opencores.org/ocsvn/or1k/or1k/trunk
Subversion Repositories or1k
[/] [or1k/] [trunk/] [insight/] [libgui/] [src/] [tkCanvEdge.c] - Rev 578
Go to most recent revision | Compare with Previous | Blame | View Log
/* * tkCanvEdge.c -- * * This file implements edge items for canvas widgets. * * Copyright (c) 1993 by Sven Delmas * All rights reserved. * See the file COPYRIGHT for the copyright notes. * * * This source is based upon the file tkCanvLine.c from: * * John Ousterhout * * Copyright (c) 1992-1993 The Regents of the University of California. * All rights reserved. * * Permission is hereby granted, without written agreement and without * license or royalty fees, to use, copy, modify, and distribute this * software and its documentation for any purpose, provided that the * above copyright notice and the following two paragraphs appear in * all copies of this software. * * IN NO EVENT SHALL THE UNIVERSITY OF CALIFORNIA BE LIABLE TO ANY PARTY FOR * DIRECT, INDIRECT, SPECIAL, INCIDENTAL, OR CONSEQUENTIAL DAMAGES ARISING OUT * OF THE USE OF THIS SOFTWARE AND ITS DOCUMENTATION, EVEN IF THE UNIVERSITY OF * CALIFORNIA HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. * * THE UNIVERSITY OF CALIFORNIA SPECIFICALLY DISCLAIMS ANY WARRANTIES, * INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY * AND FITNESS FOR A PARTICULAR PURPOSE. THE SOFTWARE PROVIDED HEREUNDER IS * ON AN "AS IS" BASIS, AND THE UNIVERSITY OF CALIFORNIA HAS NO OBLIGATION TO * PROVIDE MAINTENANCE, SUPPORT, UPDATES, ENHANCEMENTS, OR MODIFICATIONS. */ /* 05may96 wmt: converted to tk4.1 */ #ifdef HAVE_CONFIG_H #include <config.h> #endif #ifdef HAVE_UNISTD_H #include <unistd.h> #endif #include <stdio.h> #include <math.h> #include "tkInt.h" #include "tkCanvas.h" /* #include "tkConfig.h" 05nov95 wmt */ #include "tkPort.h" #ifdef _MSC_VER #define F_OK 0 #endif /* * The structure below defines the record for each edge item. */ typedef struct EdgeItem { Tk_Item header; /* Generic stuff that's the same for all * types. MUST BE FIRST IN STRUCTURE. */ Tk_Canvas canvas; /* Canvas containing item. Needed for * parsing arrow shapes. a register variable */ int numPoints; /* Number of points in edge (always >= 2). */ double *coordPtr; /* Pointer to malloc-ed array containing * x- and y-coords of all points in edge. * X-coords are even-valued indices, y-coords * are corresponding odd-valued indices. If * the edge has arrowheads then the first * and last points have been adjusted to refer * to the necks of the arrowheads rather than * their tips. The actual endpoints are * stored in the *firstArrowPtr and * *lastArrowPtr, if they exist. */ char *label; /* Label to display. */ char *menu1; /* Standard menu for item, usually * activated with button-3. */ char *menu2; /* Alternative menu for item, usually * activated with meta-button-3. */ char *menu3; /* Alternative menu for item, usually * activated with control-button-3. */ char *name; /* Name for item. */ char *state; /* State of item, this value is used * to represent the selection status * (normal, selected). */ char *graphName; /* Name of the Graph. */ char *from; /* From icon id. */ char *to; /* To icon id. */ Tk_Font tkfont; /* Font for drawing text. */ Tk_TextLayout textLayout; /* Cached text layout information. */ Tk_Justify justify; /* Justification to use for text within * window. */ int width; /* Width of edge. */ int textHeight; /* Height of text label in points. */ int textWidth; /* Width of text label in points. */ XColor *fgColor; /* Foreground color for edge. */ XColor *bgColor; /* Background color to use for icon. */ Pixmap fillStipple; /* Stipple bitmap for filling edge. */ int capStyle; /* Cap style for edge. */ int joinStyle; /* Join style for edge. */ GC invertedGc; /* Graphics context to use for drawing * the edge label on screen. */ GC gc; /* Graphics context for filling edge. */ Tk_Uid arrow; /* Indicates whether or not to draw arrowheads: * "none", "first", "last", or "both". */ float arrowShapeA; /* Distance from tip of arrowhead to center. */ float arrowShapeB; /* Distance from tip of arrowhead to trailing * point, measured along shaft. */ float arrowShapeC; /* Distance of trailing points from outside * edge of shaft. */ double *firstArrowPtr; /* Points to array of PTS_IN_ARROW points * describing polygon for arrowhead at first * point in edge. First point of arrowhead * is tip. Malloc'ed. NULL means no arrowhead * at first point. */ double *lastArrowPtr; /* Points to polygon for arrowhead at last * point in edge (PTS_IN_ARROW points, first * of which is tip). Malloc'ed. NULL means * no arrowhead at last point. */ int smooth; /* Non-zero means draw edge smoothed (i.e. * with Bezier splines). */ int splineSteps; /* Number of steps in each spline segment. */ } EdgeItem; /* * Number of points in an arrowHead: */ #define PTS_IN_ARROW 6 /* * Prototypes for procedures defined in this file: */ static int ArrowheadPostscript _ANSI_ARGS_((Tcl_Interp *interp, Tk_Canvas canvas, EdgeItem *edgePtr, double *arrowPtr)); static void ComputeEdgeBbox _ANSI_ARGS_((Tk_Canvas canvas, EdgeItem *edgePtr)); static int ConfigureEdge _ANSI_ARGS_((Tcl_Interp *interp, Tk_Canvas canvas, Tk_Item *itemPtr, int argc, char **argv, int flags)); static int ConfigureArrows _ANSI_ARGS_((Tk_Canvas canvas, EdgeItem *edgePtr)); static int CreateEdge _ANSI_ARGS_((Tcl_Interp *interp, Tk_Canvas canvas, struct Tk_Item *itemPtr, int argc, char **argv)); static void DeleteEdge _ANSI_ARGS_((Tk_Canvas canvas, Tk_Item *itemPtr, Display *display)); static void DisplayEdge _ANSI_ARGS_((Tk_Canvas canvas, Tk_Item *itemPtr, Display *display, Drawable dst, int x, int y, int width, int height)); static int EdgeCoords _ANSI_ARGS_((Tcl_Interp *interp, Tk_Canvas canvas, Tk_Item *itemPtr, int argc, char **argv)); static int EdgeToArea _ANSI_ARGS_((Tk_Canvas canvas, Tk_Item *itemPtr, double *rectPtr)); static double EdgeToPoint _ANSI_ARGS_((Tk_Canvas canvas, Tk_Item *itemPtr, double *coordPtr)); static int EdgeToPostscript _ANSI_ARGS_((Tcl_Interp *interp, Tk_Canvas canvas, Tk_Item *itemPtr, int prepass)); static int ParseArrowShape _ANSI_ARGS_((ClientData clientData, Tcl_Interp *interp, Tk_Window tkwin, char *value, char *recordPtr, int offset)); static char * PrintArrowShape _ANSI_ARGS_((ClientData clientData, Tk_Window tkwin, char *recordPtr, int offset, Tcl_FreeProc **freeProcPtr)); static void ScaleEdge _ANSI_ARGS_((Tk_Canvas canvas, Tk_Item *itemPtr, double originX, double originY, double scaleX, double scaleY)); static void TranslateEdge _ANSI_ARGS_((Tk_Canvas canvas, Tk_Item *itemPtr, double deltaX, double deltaY)); /* * Information used for parsing configuration specs. If you change any * of the default strings, be sure to change the corresponding default * values in CreateEdge. */ static Tk_CustomOption arrowShapeOption = { ParseArrowShape, PrintArrowShape, (ClientData) NULL}; static Tk_CustomOption tagsOption = {Tk_CanvasTagsParseProc, Tk_CanvasTagsPrintProc, (ClientData) NULL}; static Tk_ConfigSpec configSpecs[] = { {TK_CONFIG_UID, "-arrow", (char *) NULL, (char *) NULL, "none", Tk_Offset(EdgeItem, arrow), TK_CONFIG_DONT_SET_DEFAULT}, {TK_CONFIG_CUSTOM, "-arrowshape", (char *) NULL, (char *) NULL, "8 10 3", Tk_Offset(EdgeItem, arrowShapeA), TK_CONFIG_DONT_SET_DEFAULT, &arrowShapeOption}, {TK_CONFIG_COLOR, "-background", (char *) NULL, (char *) NULL, (char *) NULL, Tk_Offset(EdgeItem, bgColor), TK_CONFIG_NULL_OK}, {TK_CONFIG_CAP_STYLE, "-capstyle", (char *) NULL, (char *) NULL, "butt", Tk_Offset(EdgeItem, capStyle), TK_CONFIG_DONT_SET_DEFAULT}, {TK_CONFIG_COLOR, "-fill", (char *) NULL, (char *) NULL, "black", Tk_Offset(EdgeItem, fgColor), TK_CONFIG_NULL_OK}, {TK_CONFIG_FONT, "-font", (char *) NULL, (char *) NULL, "Helvetica 12 bold", Tk_Offset(EdgeItem, tkfont), 0}, {TK_CONFIG_STRING, "-from", (char *) NULL, (char *) NULL, "", Tk_Offset(EdgeItem, from), 0}, {TK_CONFIG_STRING, "-graphname", (char *) NULL, (char *) NULL, "", Tk_Offset(EdgeItem, graphName), 0}, {TK_CONFIG_JOIN_STYLE, "-joinstyle", (char *) NULL, (char *) NULL, "round", Tk_Offset(EdgeItem, joinStyle), TK_CONFIG_DONT_SET_DEFAULT}, {TK_CONFIG_STRING, "-label", (char *) NULL, (char *) NULL, "", Tk_Offset(EdgeItem, label), 0}, {TK_CONFIG_STRING, "-menu1", (char *) NULL, (char *) NULL, "", Tk_Offset(EdgeItem, menu1), 0}, {TK_CONFIG_STRING, "-menu2", (char *) NULL, (char *) NULL, "", Tk_Offset(EdgeItem, menu2), 0}, {TK_CONFIG_STRING, "-menu3", (char *) NULL, (char *) NULL, "", Tk_Offset(EdgeItem, menu3), 0}, {TK_CONFIG_STRING, "-name", (char *) NULL, (char *) NULL, "", Tk_Offset(EdgeItem, name), 0}, {TK_CONFIG_BOOLEAN, "-smooth", (char *) NULL, (char *) NULL, "0", Tk_Offset(EdgeItem, smooth), TK_CONFIG_DONT_SET_DEFAULT}, {TK_CONFIG_INT, "-splinesteps", (char *) NULL, (char *) NULL, "12", Tk_Offset(EdgeItem, splineSteps), TK_CONFIG_DONT_SET_DEFAULT}, {TK_CONFIG_STRING, "-state", (char *) NULL, (char *) NULL, "", Tk_Offset(EdgeItem, state), 0}, {TK_CONFIG_BITMAP, "-stipple", (char *) NULL, (char *) NULL, (char *) NULL, Tk_Offset(EdgeItem, fillStipple), TK_CONFIG_NULL_OK}, {TK_CONFIG_CUSTOM, "-tags", (char *) NULL, (char *) NULL, (char *) NULL, 0, TK_CONFIG_NULL_OK, &tagsOption}, {TK_CONFIG_PIXELS, "-textheight", (char *) NULL, (char *) NULL, "0", Tk_Offset(EdgeItem, textHeight), TK_CONFIG_DONT_SET_DEFAULT}, {TK_CONFIG_PIXELS, "-textwidth", (char *) NULL, (char *) NULL, "0", Tk_Offset(EdgeItem, textWidth), TK_CONFIG_DONT_SET_DEFAULT}, {TK_CONFIG_STRING, "-to", (char *) NULL, (char *) NULL, "", Tk_Offset(EdgeItem, to), 0}, {TK_CONFIG_PIXELS, "-width", (char *) NULL, (char *) NULL, "1", Tk_Offset(EdgeItem, width), TK_CONFIG_DONT_SET_DEFAULT}, {TK_CONFIG_JUSTIFY, "-justify", "justify", "Justify", "left", Tk_Offset(EdgeItem, justify), 0}, {TK_CONFIG_END, (char *) NULL, (char *) NULL, (char *) NULL, (char *) NULL, 0, 0} }; /* * The structures below defines the edge item type by means * of procedures that can be invoked by generic item code. */ Tk_ItemType tkEdgeType = { "edge", /* name */ sizeof(EdgeItem), /* itemSize */ CreateEdge, /* createProc */ configSpecs, /* configSpecs */ ConfigureEdge, /* configureProc */ EdgeCoords, /* coordProc */ DeleteEdge, /* deleteProc */ DisplayEdge, /* displayProc */ 0, /* alwaysRedraw */ EdgeToPoint, /* pointProc */ EdgeToArea, /* areaProc */ EdgeToPostscript, /* postscriptProc */ ScaleEdge, /* scaleProc */ TranslateEdge, /* translateProc */ (Tk_ItemIndexProc *) NULL, /* indexProc */ (Tk_ItemCursorProc *) NULL, /* icursorProc */ (Tk_ItemSelectionProc *) NULL, /* selectionProc */ (Tk_ItemInsertProc *) NULL, /* insertProc */ (Tk_ItemDCharsProc *) NULL, /* dTextProc */ (Tk_ItemType *) NULL /* nextPtr */ }; /* * The Tk_Uid's below refer to uids for the various arrow types: */ static Tk_Uid noneUid = NULL; static Tk_Uid firstUid = NULL; static Tk_Uid lastUid = NULL; static Tk_Uid bothUid = NULL; /* * The definition below determines how large are static arrays * used to hold spline points (splines larger than this have to * have their arrays malloc-ed). */ #define MAX_STATIC_POINTS 200 /* *-------------------------------------------------------------- * * CreateEdge -- * * This procedure is invoked to create a new edge item in * a canvas. * * Results: * A standard Tcl return value. If an error occurred in * creating the item, then an error message is left in * interp->result; in this case itemPtr is * left uninitialized, so it can be safely freed by the * caller. * * Side effects: * A new edge item is created. * *-------------------------------------------------------------- */ static int CreateEdge(interp, canvas, itemPtr, argc, argv) Tcl_Interp *interp; /* Interpreter for error reporting. */ Tk_Canvas canvas; /* Canvas to hold new item. */ Tk_Item *itemPtr; /* Record to hold new item; header * has been initialized by caller. */ int argc; /* Number of arguments in argv. */ char **argv; /* Arguments describing edge. */ { EdgeItem *edgePtr = (EdgeItem *) itemPtr; int i; if (argc < 4) { Tcl_AppendResult(interp, "wrong # args: should be \"", Tk_PathName(Tk_CanvasTkwin(canvas)), "\" create ", itemPtr->typePtr->name, " x1 y1 x2 y2 ?x3 y3 ...? ?options?", (char *) NULL); return TCL_ERROR; } /* * Carry out initialization that is needed to set defaults and to * allow proper cleanup after errors during the the remainder of * this procedure. */ edgePtr->bgColor = None; edgePtr->canvas = canvas; edgePtr->capStyle = CapButt; edgePtr->coordPtr = NULL; edgePtr->fgColor = None; edgePtr->fillStipple = None; edgePtr->tkfont = NULL; edgePtr->from = NULL; edgePtr->graphName = NULL; edgePtr->joinStyle = JoinRound; edgePtr->label = NULL; edgePtr->menu1 = NULL; edgePtr->menu2 = NULL; edgePtr->menu3 = NULL; edgePtr->name = NULL; edgePtr->numPoints = 0; edgePtr->smooth = 0; edgePtr->splineSteps = 12; edgePtr->state = NULL; edgePtr->textWidth = 0; edgePtr->to = NULL; edgePtr->width = 1; edgePtr->textLayout = NULL; edgePtr->justify = TK_JUSTIFY_LEFT; edgePtr->invertedGc = None; edgePtr->gc = None; if (noneUid == NULL) { noneUid = Tk_GetUid("none"); firstUid = Tk_GetUid("first"); lastUid = Tk_GetUid("last"); bothUid = Tk_GetUid("both"); } edgePtr->arrow = noneUid; edgePtr->arrowShapeA = 8.0; edgePtr->arrowShapeB = 10.0; edgePtr->arrowShapeC = 3.0; edgePtr->firstArrowPtr = NULL; edgePtr->lastArrowPtr = NULL; /* * Count the number of points and then parse them into a point * array. Leading arguments are assumed to be points if they * start with a digit or a minus sign followed by a digit. */ for (i = 4; i < (argc-1); i+=2) { if ((!isdigit(UCHAR(argv[i][0]))) && ((argv[i][0] != '-') || (!isdigit(UCHAR(argv[i][1]))))) { break; } } if (EdgeCoords(interp, canvas, itemPtr, i, argv) != TCL_OK) { goto error; } if (ConfigureEdge(interp, canvas, itemPtr, argc-i, argv+i, 0) == TCL_OK) { return TCL_OK; } error: DeleteEdge(canvas, itemPtr, Tk_Display(Tk_CanvasTkwin(canvas))); return TCL_ERROR; } /* *-------------------------------------------------------------- * * EdgeCoords -- * * This procedure is invoked to process the "coords" widget * command on edges. See the user documentation for details * on what it does. * * Results: * Returns TCL_OK or TCL_ERROR, and sets interp->result. * * Side effects: * The coordinates for the given item may be changed. * *-------------------------------------------------------------- */ static int EdgeCoords(interp, canvas, itemPtr, argc, argv) Tcl_Interp *interp; /* Used for error reporting. */ Tk_Canvas canvas; /* Canvas containing item. */ Tk_Item *itemPtr; /* Item whose coordinates are to be * read or modified. */ int argc; /* Number of coordinates supplied in * argv. */ char **argv; /* Array of coordinates: x1, y1, * x2, y2, ... */ { EdgeItem *edgePtr = (EdgeItem *) itemPtr; char buffer[TCL_DOUBLE_SPACE]; int i, numPoints; if (argc == 0) { double *coordPtr; int numCoords; numCoords = 2*edgePtr->numPoints; if (edgePtr->firstArrowPtr != NULL) { coordPtr = edgePtr->firstArrowPtr; } else { coordPtr = edgePtr->coordPtr; } for (i = 0; i < numCoords; i++, coordPtr++) { if (i == 2) { coordPtr = edgePtr->coordPtr+2; } if ((edgePtr->lastArrowPtr != NULL) && (i == (numCoords-2))) { coordPtr = edgePtr->lastArrowPtr; } Tcl_PrintDouble(interp, *coordPtr, buffer); Tcl_AppendElement(interp, buffer); } } else if (argc < 4) { Tcl_AppendResult(interp, "too few coordinates for edge: must have at least 4", (char *) NULL); return TCL_ERROR; } else if (argc & 1) { Tcl_AppendResult(interp, "odd number of coordinates specified for edge", (char *) NULL); return TCL_ERROR; } else { numPoints = argc/2; if (edgePtr->numPoints != numPoints) { if (edgePtr->coordPtr != NULL) { ckfree((char *) edgePtr->coordPtr); } edgePtr->coordPtr = (double *) ckalloc((unsigned) (sizeof(double) * argc)); edgePtr->numPoints = numPoints; } for (i = argc-1; i >= 0; i--) { if (Tk_CanvasGetCoord(interp, canvas, argv[i], &edgePtr->coordPtr[i]) != TCL_OK) { return TCL_ERROR; } } /* * Update arrowheads by throwing away any existing arrow-head * information and calling ConfigureArrows to recompute it. */ if (edgePtr->firstArrowPtr != NULL) { ckfree((char *) edgePtr->firstArrowPtr); edgePtr->firstArrowPtr = NULL; } if (edgePtr->lastArrowPtr != NULL) { ckfree((char *) edgePtr->lastArrowPtr); edgePtr->lastArrowPtr = NULL; } if (edgePtr->arrow != noneUid) { ConfigureArrows(canvas, edgePtr); } ComputeEdgeBbox(canvas, edgePtr); } return TCL_OK; } /* *-------------------------------------------------------------- * * ConfigureEdge -- * * This procedure is invoked to configure various aspects * of a edge item such as its background color. * * Results: * A standard Tcl result code. If an error occurs, then * an error message is left in interp->result. * * Side effects: * Configuration information, such as colors and stipple * patterns, may be set for itemPtr. * *-------------------------------------------------------------- */ static int ConfigureEdge(interp, canvas, itemPtr, argc, argv, flags) Tcl_Interp *interp; /* Used for error reporting. */ Tk_Canvas canvas; /* Canvas containing itemPtr. */ Tk_Item *itemPtr; /* Edge item to reconfigure. */ int argc; /* Number of elements in argv. */ char **argv; /* Arguments describing things to configure. */ int flags; /* Flags to pass to Tk_ConfigureWidget. */ { EdgeItem *edgePtr = (EdgeItem *) itemPtr; XGCValues gcValues; GC newGC; unsigned long mask; char *value, *fullName, **list; int counter, listCounter = 0; Tcl_DString varName, fileName, buffer; Tk_Window tkwin; Tk_3DBorder bgBorder; tkwin = Tk_CanvasTkwin(canvas); bgBorder = ((TkCanvas *) canvas)->bgBorder; if (Tk_ConfigureWidget(interp, tkwin, configSpecs, argc, argv, (char *) edgePtr, flags) != TCL_OK) { return TCL_ERROR; } /* * A few of the options require additional processing, such as * graphics contexts. */ /* the normal gc */ if (edgePtr->fgColor == NULL) { newGC = None; } else { mask = GCBackground|GCForeground|GCJoinStyle|GCLineWidth; if (edgePtr->bgColor != NULL) { gcValues.background = edgePtr->bgColor->pixel; } else { gcValues.background = Tk_3DBorderColor(bgBorder)->pixel; } gcValues.foreground = edgePtr->fgColor->pixel; gcValues.join_style = edgePtr->joinStyle; if (edgePtr->width < 0) { edgePtr->width = 1; } gcValues.line_width = edgePtr->width; if (edgePtr->fillStipple != None) { gcValues.stipple = edgePtr->fillStipple; gcValues.fill_style = FillStippled; mask |= GCStipple|GCFillStyle; } if (edgePtr->arrow == noneUid) { gcValues.cap_style = edgePtr->capStyle; mask |= GCCapStyle; } if (edgePtr->tkfont != NULL) { gcValues.font = Tk_FontId(edgePtr->tkfont); mask |= GCFont; } newGC = Tk_GetGC(tkwin, mask, &gcValues); } if (edgePtr->gc != None) { Tk_FreeGC(((TkCanvas *) canvas)->display, edgePtr->gc); } edgePtr->gc = newGC; /* the inverted gc */ if (edgePtr->fgColor == NULL) { newGC = None; } else { mask = GCForeground | GCBackground; gcValues.background = edgePtr->fgColor->pixel; if (edgePtr->bgColor != NULL) { gcValues.foreground = edgePtr->bgColor->pixel; } else { gcValues.foreground = Tk_3DBorderColor(bgBorder)->pixel; } if (edgePtr->tkfont != NULL) { gcValues.font = Tk_FontId(edgePtr->tkfont); mask |= GCFont; } newGC = Tk_GetGC(tkwin, mask, &gcValues); } if (edgePtr->invertedGc != None) { Tk_FreeGC(((TkCanvas *) canvas)->display, edgePtr->invertedGc); } edgePtr->invertedGc = newGC; /* * Keep spline parameters within reasonable limits. */ if (edgePtr->splineSteps < 1) { edgePtr->splineSteps = 1; } else if (edgePtr->splineSteps > 100) { edgePtr->splineSteps = 100; } /* * Setup arrowheads, if needed. If arrowheads are turned off, * restore the edge's endpoints (they were shortened when the * arrowheads were added). */ if ((edgePtr->firstArrowPtr != NULL) && (edgePtr->arrow != firstUid) && (edgePtr->arrow != bothUid)) { edgePtr->coordPtr[0] = edgePtr->firstArrowPtr[0]; edgePtr->coordPtr[1] = edgePtr->firstArrowPtr[1]; ckfree((char *) edgePtr->firstArrowPtr); edgePtr->firstArrowPtr = NULL; } if ((edgePtr->lastArrowPtr != NULL) && (edgePtr->arrow != lastUid) && (edgePtr->arrow != bothUid)) { int index; index = 2*(edgePtr->numPoints-1); edgePtr->coordPtr[index] = edgePtr->lastArrowPtr[0]; edgePtr->coordPtr[index+1] = edgePtr->lastArrowPtr[1]; ckfree((char *) edgePtr->lastArrowPtr); edgePtr->lastArrowPtr = NULL; } if (edgePtr->arrow != noneUid) { if ((edgePtr->arrow != firstUid) && (edgePtr->arrow != lastUid) && (edgePtr->arrow != bothUid)) { Tcl_AppendResult(interp, "bad arrow spec \"", edgePtr->arrow, "\": must be none, first, last, or both", (char *) NULL); edgePtr->arrow = noneUid; return TCL_ERROR; } ConfigureArrows(canvas, edgePtr); } /* Calculate the text width & height in points. */ Tk_FreeTextLayout(edgePtr->textLayout); edgePtr->textLayout = Tk_ComputeTextLayout(edgePtr->tkfont, edgePtr->label, strlen (edgePtr->label), edgePtr->width, edgePtr->justify, 0, &edgePtr->textWidth, &edgePtr->textHeight); /* do we have a menu ? */ if (edgePtr->menu1 != NULL && strlen(edgePtr->menu1) > (size_t) 0 && edgePtr->menu1[0] != '.') { /* do we have to load the new menu definition ? */ (void) Tcl_VarEval(interp, "info commands .emenu-", edgePtr->menu1, (char *) NULL); if (strlen(interp->result) == 0) { /* the following code retrieves the path list for the menus. This */ /* is done because I don't want to attatch the pathname list to */ /* each icon. */ Tcl_DStringInit(&varName); Tcl_DStringAppend(&varName, "ip_priv(", -1); Tcl_DStringAppend(&varName, Tk_PathName(tkwin), -1); Tcl_DStringAppend(&varName, ",edgemenupath)", -1); if ((value = Tcl_GetVar(interp, varName.string, TCL_GLOBAL_ONLY)) != NULL) { if (Tcl_SplitList(interp, value, &listCounter, &list) == TCL_OK) { /* walk through list of pathnames. */ for (counter = 0; counter < listCounter; counter++) { /* create the filename to load. */ Tcl_DStringInit(&fileName); Tcl_DStringAppend(&fileName, list[counter], -1); Tcl_DStringAppend(&fileName, "/", -1); Tcl_DStringAppend(&fileName, edgePtr->menu1, -1); Tcl_DStringAppend(&fileName, ".emenu", -1); Tcl_DStringInit(&buffer); fullName = Tcl_TildeSubst(interp, fileName.string, &buffer); if (access(fullName, F_OK) != -1) { /* load new menu. */ Tcl_VarEval(interp, "source ", fullName, (char *) NULL); } Tcl_DStringFree(&fileName); Tcl_DStringFree(&buffer); } ckfree((char *) list); } } Tcl_DStringFree(&varName); } } /* do we have a menu ? */ if (edgePtr->menu2 != NULL && strlen(edgePtr->menu2) > (size_t) 0 && edgePtr->menu2[0] != '.') { /* do we have to load the new menu definition ? */ (void) Tcl_VarEval(interp, "info commands .emenu-", edgePtr->menu2, (char *) NULL); if (strlen(interp->result) == 0) { /* the following code retrieves the path list for the menus. This */ /* is done because I don't want to attatch the pathname list to */ /* each icon. */ Tcl_DStringInit(&varName); Tcl_DStringAppend(&varName, "ip_priv(", -1); Tcl_DStringAppend(&varName, Tk_PathName(tkwin), -1); Tcl_DStringAppend(&varName, ",edgemenupath)", -1); if ((value = Tcl_GetVar(interp, varName.string, TCL_GLOBAL_ONLY)) != NULL) { if (Tcl_SplitList(interp, value, &listCounter, &list) == TCL_OK) { /* walk through list of pathnames. */ for (counter = 0; counter < listCounter; counter++) { /* create the filename to load. */ Tcl_DStringInit(&fileName); Tcl_DStringAppend(&fileName, list[counter], -1); Tcl_DStringAppend(&fileName, "/", -1); Tcl_DStringAppend(&fileName, edgePtr->menu2, -1); Tcl_DStringAppend(&fileName, ".emenu", -1); Tcl_DStringInit(&buffer); fullName = Tcl_TildeSubst(interp, fileName.string, &buffer); if (access(fullName, F_OK) != -1) { /* load new menu. */ Tcl_VarEval(interp, "source ", fullName, (char *) NULL); } Tcl_DStringFree(&fileName); Tcl_DStringFree(&buffer); } ckfree((char *) list); } } Tcl_DStringFree(&varName); } } /* do we have a menu ? */ if (edgePtr->menu3 != NULL && strlen(edgePtr->menu3) > (size_t) 0 && edgePtr->menu3[0] != '.') { /* do we have to load the new menu definition ? */ (void) Tcl_VarEval(interp, "info commands .emenu-", edgePtr->menu3, (char *) NULL); if (strlen(interp->result) == 0) { /* the following code retrieves the path list for the menus. This */ /* is done because I don't want to attatch the pathname list to */ /* each icon. */ Tcl_DStringInit(&varName); Tcl_DStringAppend(&varName, "ip_priv(", -1); Tcl_DStringAppend(&varName, Tk_PathName(tkwin), -1); Tcl_DStringAppend(&varName, ",edgemenupath)", -1); if ((value = Tcl_GetVar(interp, varName.string, TCL_GLOBAL_ONLY)) != NULL) { if (Tcl_SplitList(interp, value, &listCounter, &list) == TCL_OK) { /* walk through list of pathnames. */ for (counter = 0; counter < listCounter; counter++) { /* create the filename to load. */ Tcl_DStringInit(&fileName); Tcl_DStringAppend(&fileName, list[counter], -1); Tcl_DStringAppend(&fileName, "/", -1); Tcl_DStringAppend(&fileName, edgePtr->menu3, -1); Tcl_DStringAppend(&fileName, ".emenu", -1); Tcl_DStringInit(&buffer); fullName = Tcl_TildeSubst(interp, fileName.string, &buffer); if (access(fullName, F_OK) != -1) { /* load new menu. */ Tcl_VarEval(interp, "source ", fullName, (char *) NULL); } Tcl_DStringFree(&fileName); Tcl_DStringFree(&buffer); } ckfree((char *) list); } } Tcl_DStringFree(&varName); } } /* * Recompute bounding box for edge. */ ComputeEdgeBbox(canvas, edgePtr); return TCL_OK; } /* *-------------------------------------------------------------- * * DeleteEdge -- * * This procedure is called to clean up the data structure * associated with a edge item. * * Results: * None. * * Side effects: * Resources associated with itemPtr are released. * *-------------------------------------------------------------- */ static void DeleteEdge(canvas, itemPtr, display) Tk_Canvas canvas; /* Info about overall canvas widget. */ Tk_Item *itemPtr; /* Item that is being deleted. */ Display *display; /* Display containing window for * canvas. */ { EdgeItem *edgePtr = (EdgeItem *) itemPtr; if (edgePtr->bgColor != NULL) { Tk_FreeColor(edgePtr->bgColor); } if (edgePtr->coordPtr != NULL) { ckfree((char *) edgePtr->coordPtr); } if (edgePtr->fgColor != NULL) { Tk_FreeColor(edgePtr->fgColor); } if (edgePtr->fillStipple != None) { Tk_FreeBitmap(display, edgePtr->fillStipple); } if (edgePtr->tkfont != NULL) { Tk_FreeFont(edgePtr->tkfont); } if (edgePtr->from != NULL) { ckfree(edgePtr->from); } if (edgePtr->graphName != NULL) { ckfree(edgePtr->graphName); } if (edgePtr->label != NULL) { ckfree(edgePtr->label); } if (edgePtr->menu1 != NULL) { ckfree(edgePtr->menu1); } if (edgePtr->menu2 != NULL) { ckfree(edgePtr->menu2); } if (edgePtr->menu3 != NULL) { ckfree(edgePtr->menu3); } if (edgePtr->name != NULL) { ckfree(edgePtr->name); } if (edgePtr->state != NULL) { ckfree(edgePtr->state); } if (edgePtr->to != NULL) { ckfree(edgePtr->to); } if (edgePtr->invertedGc != None) { Tk_FreeGC(display, edgePtr->invertedGc); } if (edgePtr->gc != None) { Tk_FreeGC(display, edgePtr->gc); } if (edgePtr->firstArrowPtr != NULL) { ckfree((char *) edgePtr->firstArrowPtr); } if (edgePtr->lastArrowPtr != NULL) { ckfree((char *) edgePtr->lastArrowPtr); } if (edgePtr->textLayout != NULL) { ckfree((char *) edgePtr->textLayout); } } /* *-------------------------------------------------------------- * * ComputeEdgeBbox -- * * This procedure is invoked to compute the bounding box of * all the pixels that may be drawn as part of a edge. * * Results: * None. * * Side effects: * The fields x1, y1, x2, and y2 are updated in the header * for itemPtr. * *-------------------------------------------------------------- */ static void ComputeEdgeBbox(canvas, edgePtr) Tk_Canvas canvas; /* Canvas that contains item. */ EdgeItem *edgePtr; /* Item whose bbos is to be * recomputed. */ { double *coordPtr; int i, lineWidth, lineHeight; coordPtr = edgePtr->coordPtr; edgePtr->header.x1 = edgePtr->header.x2 = *coordPtr; edgePtr->header.y1 = edgePtr->header.y2 = coordPtr[1]; /* * Compute the bounding box of all the points in the edge, * then expand in all directions by the edge's width to take * care of butting or rounded corners and projecting or * rounded caps. This expansion is an overestimate (worst-case * is square root of two over two) but it's simple. Don't do * anything special for curves. This causes an additional * overestimate in the bounding box, but is faster. */ for (i = 1, coordPtr = edgePtr->coordPtr+2; i < edgePtr->numPoints; i++, coordPtr += 2) { TkIncludePoint((Tk_Item *) edgePtr, coordPtr); } edgePtr->header.x1 -= edgePtr->width; edgePtr->header.x2 += edgePtr->width; edgePtr->header.y1 -= edgePtr->width; edgePtr->header.y2 += edgePtr->width; /* * For mitered edges, make a second pass through all the points. * Compute the locations of the two miter vertex points and add * those into the bounding box. */ if (edgePtr->joinStyle == JoinMiter) { for (i = edgePtr->numPoints, coordPtr = edgePtr->coordPtr; i >= 3; i--, coordPtr += 2) { double miter[4]; int j; if (TkGetMiterPoints(coordPtr, coordPtr+2, coordPtr+4, (double) edgePtr->width, miter, miter+2)) { for (j = 0; j < 4; j += 2) { TkIncludePoint((Tk_Item *) edgePtr, miter+j); } } } } /* * Add in the sizes of arrowheads, if any. */ if (edgePtr->arrow != noneUid) { if (edgePtr->arrow != lastUid) { for (i = 0, coordPtr = edgePtr->firstArrowPtr; i < PTS_IN_ARROW; i++, coordPtr += 2) { TkIncludePoint((Tk_Item *) edgePtr, coordPtr); } } if (edgePtr->arrow != firstUid) { for (i = 0, coordPtr = edgePtr->lastArrowPtr; i < PTS_IN_ARROW; i++, coordPtr += 2) { TkIncludePoint((Tk_Item *) edgePtr, coordPtr); } } } /* * Add one more pixel of fudge factor just to be safe (e.g. * X may round differently than we do). */ edgePtr->header.x1 -= 1; edgePtr->header.x2 += 1; edgePtr->header.y1 -= 1; edgePtr->header.y2 += 1; /* maybe we have a label that is wider than the line */ if (edgePtr->tkfont != NULL && edgePtr->label != NULL) { Tk_FreeTextLayout(edgePtr->textLayout); edgePtr->textLayout = Tk_ComputeTextLayout(edgePtr->tkfont, edgePtr->label, strlen (edgePtr->label), edgePtr->width, edgePtr->justify, 0, &lineWidth, &lineHeight); lineWidth = strlen(edgePtr->label); if (lineWidth > (edgePtr->header.x2 - edgePtr->header.x2)) { edgePtr->header.x1 -= (lineWidth - (edgePtr->header.x2 - edgePtr->header.x2)) / 2; edgePtr->header.x2 += (lineWidth - (edgePtr->header.x2 - edgePtr->header.x2)) / 2; } if (lineHeight > (edgePtr->header.y2 - edgePtr->header.y2)) { edgePtr->header.y1 -= (lineHeight - (edgePtr->header.y2 - edgePtr->header.y2)) / 2; edgePtr->header.y2 += (lineHeight - (edgePtr->header.y2 - edgePtr->header.y2)) / 2; } } } /* *-------------------------------------------------------------- * * DisplayEdge -- * * This procedure is invoked to draw a edge item in a given * drawable. * * Results: * None. * * Side effects: * ItemPtr is drawn in drawable using the transformation * information in canvas. * *-------------------------------------------------------------- */ static void DisplayEdge(canvas, itemPtr, display, drawable, x, y, width, height) Tk_Canvas canvas; /* Canvas that contains item. */ Tk_Item *itemPtr; /* Item to be displayed. */ Display *display; /* Display on which to draw item. */ Drawable drawable; /* Pixmap or window in which to draw * item. */ int x, y, width, height; /* Describes region of canvas that * must be redisplayed (not used). */ { EdgeItem *edgePtr = (EdgeItem *) itemPtr; XPoint staticPoints[MAX_STATIC_POINTS]; XPoint *pointPtr; XPoint *pPtr; register double *coordPtr; int i, numPoints, lineHeight; int centerX, centerY, lineWidth; short drawableX, drawableY; if (edgePtr->gc == None) { return; } /* * Build up an array of points in screen coordinates. Use a * static array unless the edge has an enormous number of points; * in this case, dynamically allocate an array. For smoothed edges, * generate the curve points on each redisplay. */ if ((edgePtr->smooth) && (edgePtr->numPoints > 2)) { numPoints = 1 + edgePtr->numPoints*edgePtr->splineSteps; } else { numPoints = edgePtr->numPoints; } if (numPoints <= MAX_STATIC_POINTS) { pointPtr = staticPoints; } else { pointPtr = (XPoint *) ckalloc((unsigned) (numPoints * sizeof(XPoint))); } if (edgePtr->smooth) { numPoints = TkMakeBezierCurve(canvas, edgePtr->coordPtr, edgePtr->numPoints, edgePtr->splineSteps, pointPtr, (double *) NULL); } else { for (i = 0, coordPtr = edgePtr->coordPtr, pPtr = pointPtr; i < edgePtr->numPoints; i += 1, coordPtr += 2, pPtr++) { Tk_CanvasDrawableCoords(canvas, coordPtr[0], coordPtr[1], &pPtr->x, &pPtr->y); } } /* * Display edge, the free up edge storage if it was dynamically * allocated. If we're stippling, then modify the stipple offset * in the GC. Be sure to reset the offset when done, since the * GC is supposed to be read-only. */ if (edgePtr->fillStipple != None) { XSetTSOrigin(display, edgePtr->gc, -((TkCanvas *) canvas)->drawableXOrigin, -((TkCanvas *) canvas)->drawableYOrigin); } XDrawLines(display, drawable, edgePtr->gc, pointPtr, numPoints, CoordModeOrigin); if (pointPtr[numPoints-1].x > pointPtr[numPoints-2].x) { centerX = ((pointPtr[numPoints-1].x - pointPtr[numPoints-2].x) / 2) + pointPtr[numPoints-2].x; } else { centerX = ((pointPtr[numPoints-2].x - pointPtr[numPoints-1].x) / 2) + pointPtr[numPoints-1].x; } if (pointPtr[numPoints-1].y > pointPtr[numPoints-2].y) { centerY = ((pointPtr[numPoints-1].y - pointPtr[numPoints-2].y) / 2) + pointPtr[numPoints-2].y; } else { centerY = ((pointPtr[numPoints-2].y - pointPtr[numPoints-1].y) / 2) + pointPtr[numPoints-1].y; } if (pointPtr != staticPoints) { ckfree((char *) pointPtr); } /* * Display arrowheads, if they are wanted. */ if (edgePtr->arrow != noneUid) { if (edgePtr->arrow != lastUid) { TkFillPolygon(canvas, edgePtr->firstArrowPtr, PTS_IN_ARROW, display, drawable, edgePtr->gc, NULL); } if (edgePtr->arrow != firstUid) { TkFillPolygon(canvas, edgePtr->lastArrowPtr, PTS_IN_ARROW, display, drawable, edgePtr->gc, NULL); } } if (edgePtr->fillStipple != None) { XSetTSOrigin(display, edgePtr->gc, 0, 0); } /* display the label */ if (edgePtr->label != NULL && (size_t) strlen(edgePtr->label) > 0) { Tk_FreeTextLayout(edgePtr->textLayout); edgePtr->textLayout = Tk_ComputeTextLayout(edgePtr->tkfont, edgePtr->label, strlen (edgePtr->label), edgePtr->width, edgePtr->justify, 0, &lineWidth, &lineHeight); lineWidth = strlen(edgePtr->label); if (strcmp(edgePtr->state, "selected") == 0) { XFillRectangle(display, drawable, edgePtr->gc, centerX - (lineWidth / 2) - 1, centerY - (lineHeight / 2) - 1, lineWidth + 2, lineHeight + 2); Tk_CanvasDrawableCoords(canvas, (double) (edgePtr->header.x1 + x), (double) (edgePtr->header.y1 + y), &drawableX, &drawableY); Tk_DrawTextLayout(display, drawable, edgePtr->gc, edgePtr->textLayout, drawableX, drawableY, 0, -1); } else { XFillRectangle(display, drawable, edgePtr->invertedGc, centerX - (lineWidth / 2) - 1, centerY - (lineHeight / 2) - 1, lineWidth + 2, lineHeight + 2); Tk_CanvasDrawableCoords(canvas, (double) (edgePtr->header.x1 + x), (double) (edgePtr->header.y1 + y), &drawableX, &drawableY); Tk_DrawTextLayout(display, drawable, edgePtr->gc, edgePtr->textLayout, drawableX, drawableY, 0, -1); } } } /* *-------------------------------------------------------------- * * EdgeToPoint -- * * Computes the distance from a given point to a given * edge, in canvas units. * * Results: * The return value is 0 if the point whose x and y coordinates * are pointPtr[0] and pointPtr[1] is inside the edge. If the * point isn't inside the edge then the return value is the * distance from the point to the edge. * * Side effects: * None. * *-------------------------------------------------------------- */ /* ARGSUSED */ static double EdgeToPoint(canvas, itemPtr, pointPtr) Tk_Canvas canvas; /* Canvas containing item. */ Tk_Item *itemPtr; /* Item to check against point. */ double *pointPtr; /* Pointer to x and y coordinates. */ { EdgeItem *edgePtr = (EdgeItem *) itemPtr; register double *coordPtr, *edgePoints; double staticSpace[2*MAX_STATIC_POINTS]; double poly[10]; double bestDist, dist; int numPoints, count; int changedMiterToBevel; /* Non-zero means that a mitered corner * had to be treated as beveled after all * because the angle was < 11 degrees. */ bestDist = 1.0e40; /* * Handle smoothed edges by generating an expanded set of points * against which to do the check. */ if ((edgePtr->smooth) && (edgePtr->numPoints > 2)) { numPoints = 1 + edgePtr->numPoints*edgePtr->splineSteps; if (numPoints <= MAX_STATIC_POINTS) { edgePoints = staticSpace; } else { edgePoints = (double *) ckalloc((unsigned) (2*numPoints*sizeof(double))); } numPoints = TkMakeBezierCurve(canvas, edgePtr->coordPtr, edgePtr->numPoints, edgePtr->splineSteps, (XPoint *) NULL, edgePoints); } else { numPoints = edgePtr->numPoints; edgePoints = edgePtr->coordPtr; } /* * The overall idea is to iterate through all of the edges of * the edge, computing a polygon for each edge and testing the * point against that polygon. In addition, there are additional * tests to deal with rounded joints and caps. */ changedMiterToBevel = 0; for (count = numPoints, coordPtr = edgePoints; count >= 2; count--, coordPtr += 2) { /* * If rounding is done around the first point then compute * the distance between the point and the point. */ if (((edgePtr->capStyle == CapRound) && (count == numPoints)) || ((edgePtr->joinStyle == JoinRound) && (count != numPoints))) { dist = hypot(coordPtr[0] - pointPtr[0], coordPtr[1] - pointPtr[1]) - edgePtr->width/2.0; if (dist <= 0.0) { bestDist = 0.0; goto done; } else if (dist < bestDist) { bestDist = dist; } } /* * Compute the polygonal shape corresponding to this edge, * consisting of two points for the first point of the edge * and two points for the last point of the edge. */ if (count == numPoints) { TkGetButtPoints(coordPtr+2, coordPtr, (double) edgePtr->width, edgePtr->capStyle == CapProjecting, poly, poly+2); } else if ((edgePtr->joinStyle == JoinMiter) && !changedMiterToBevel) { poly[0] = poly[6]; poly[1] = poly[7]; poly[2] = poly[4]; poly[3] = poly[5]; } else { TkGetButtPoints(coordPtr+2, coordPtr, (double) edgePtr->width, 0, poly, poly+2); /* * If this edge uses beveled joints, then check the distance * to a polygon comprising the last two points of the previous * polygon and the first two from this polygon; this checks * the wedges that fill the mitered joint. */ if ((edgePtr->joinStyle == JoinBevel) || changedMiterToBevel) { poly[8] = poly[0]; poly[9] = poly[1]; dist = TkPolygonToPoint(poly, 5, pointPtr); if (dist <= 0.0) { bestDist = 0.0; goto done; } else if (dist < bestDist) { bestDist = dist; } changedMiterToBevel = 0; } } if (count == 2) { TkGetButtPoints(coordPtr, coordPtr+2, (double) edgePtr->width, edgePtr->capStyle == CapProjecting, poly+4, poly+6); } else if (edgePtr->joinStyle == JoinMiter) { if (TkGetMiterPoints(coordPtr, coordPtr+2, coordPtr+4, (double) edgePtr->width, poly+4, poly+6) == 0) { changedMiterToBevel = 1; TkGetButtPoints(coordPtr, coordPtr+2, (double) edgePtr->width, 0, poly+4, poly+6); } } else { TkGetButtPoints(coordPtr, coordPtr+2, (double) edgePtr->width, 0, poly+4, poly+6); } poly[8] = poly[0]; poly[9] = poly[1]; dist = TkPolygonToPoint(poly, 5, pointPtr); if (dist <= 0.0) { bestDist = 0.0; goto done; } else if (dist < bestDist) { bestDist = dist; } } /* * If caps are rounded, check the distance to the cap around the * final end point of the edge. */ if (edgePtr->capStyle == CapRound) { dist = hypot(coordPtr[0] - pointPtr[0], coordPtr[1] - pointPtr[1]) - edgePtr->width/2.0; if (dist <= 0.0) { bestDist = 0.0; goto done; } else if (dist < bestDist) { bestDist = dist; } } /* * If there are arrowheads, check the distance to the arrowheads. */ if (edgePtr->arrow != noneUid) { if (edgePtr->arrow != lastUid) { dist = TkPolygonToPoint(edgePtr->firstArrowPtr, PTS_IN_ARROW, pointPtr); if (dist <= 0.0) { bestDist = 0.0; goto done; } else if (dist < bestDist) { bestDist = dist; } } if (edgePtr->arrow != firstUid) { dist = TkPolygonToPoint(edgePtr->lastArrowPtr, PTS_IN_ARROW, pointPtr); if (dist <= 0.0) { bestDist = 0.0; goto done; } else if (dist < bestDist) { bestDist = dist; } } } done: if ((edgePoints != staticSpace) && (edgePoints != edgePtr->coordPtr)) { ckfree((char *) edgePoints); } return bestDist; } /* *-------------------------------------------------------------- * * EdgeToArea -- * * This procedure is called to determine whether an item * lies entirely inside, entirely outside, or overlapping * a given rectangular area. * * Results: * -1 is returned if the item is entirely outside the * area, 0 if it overlaps, and 1 if it is entirely * inside the given area. * * Side effects: * None. * *-------------------------------------------------------------- */ /* ARGSUSED */ static int EdgeToArea(canvas, itemPtr, rectPtr) Tk_Canvas canvas; /* Canvas containing item. */ Tk_Item *itemPtr; /* Item to check against edge. */ double *rectPtr; { EdgeItem *edgePtr = (EdgeItem *) itemPtr; register double *coordPtr; double staticSpace[2*MAX_STATIC_POINTS]; double *edgePoints, poly[10]; double radius; int numPoints, count; int changedMiterToBevel; /* Non-zero means that a mitered corner * had to be treated as beveled after all * because the angle was < 11 degrees. */ int inside; /* Tentative guess about what to return, * based on all points seen so far: one * means everything seen so far was * inside the area; -1 means everything * was outside the area. 0 means overlap * has been found. */ radius = edgePtr->width/2.0; inside = -1; /* * Handle smoothed edges by generating an expanded set of points * against which to do the check. */ if ((edgePtr->smooth) && (edgePtr->numPoints > 2)) { numPoints = 1 + edgePtr->numPoints*edgePtr->splineSteps; if (numPoints <= MAX_STATIC_POINTS) { edgePoints = staticSpace; } else { edgePoints = (double *) ckalloc((unsigned) (2*numPoints*sizeof(double))); } numPoints = TkMakeBezierCurve(canvas, edgePtr->coordPtr, edgePtr->numPoints, edgePtr->splineSteps, (XPoint *) NULL, edgePoints); } else { numPoints = edgePtr->numPoints; edgePoints = edgePtr->coordPtr; } coordPtr = edgePoints; if ((coordPtr[0] >= rectPtr[0]) && (coordPtr[0] <= rectPtr[2]) && (coordPtr[1] >= rectPtr[1]) && (coordPtr[1] <= rectPtr[3])) { inside = 1; } /* * Iterate through all of the edges of the edge, computing a polygon * for each edge and testing the area against that polygon. In * addition, there are additional tests to deal with rounded joints * and caps. */ changedMiterToBevel = 0; for (count = numPoints; count >= 2; count--, coordPtr += 2) { /* * If rounding is done around the first point of the edge * then test a circular region around the point with the * area. */ if (((edgePtr->capStyle == CapRound) && (count == numPoints)) || ((edgePtr->joinStyle == JoinRound) && (count != numPoints))) { poly[0] = coordPtr[0] - radius; poly[1] = coordPtr[1] - radius; poly[2] = coordPtr[0] + radius; poly[3] = coordPtr[1] + radius; if (TkOvalToArea(poly, rectPtr) != inside) { inside = 0; goto done; } } /* * Compute the polygonal shape corresponding to this edge, * consisting of two points for the first point of the edge * and two points for the last point of the edge. */ if (count == numPoints) { TkGetButtPoints(coordPtr+2, coordPtr, (double) edgePtr->width, edgePtr->capStyle == CapProjecting, poly, poly+2); } else if ((edgePtr->joinStyle == JoinMiter) && !changedMiterToBevel) { poly[0] = poly[6]; poly[1] = poly[7]; poly[2] = poly[4]; poly[3] = poly[5]; } else { TkGetButtPoints(coordPtr+2, coordPtr, (double) edgePtr->width, 0, poly, poly+2); /* * If the last joint was beveled, then also check a * polygon comprising the last two points of the previous * polygon and the first two from this polygon; this checks * the wedges that fill the beveled joint. */ if ((edgePtr->joinStyle == JoinBevel) || changedMiterToBevel) { poly[8] = poly[0]; poly[9] = poly[1]; if (TkPolygonToArea(poly, 5, rectPtr) != inside) { inside = 0; goto done; } changedMiterToBevel = 0; } } if (count == 2) { TkGetButtPoints(coordPtr, coordPtr+2, (double) edgePtr->width, edgePtr->capStyle == CapProjecting, poly+4, poly+6); } else if (edgePtr->joinStyle == JoinMiter) { if (TkGetMiterPoints(coordPtr, coordPtr+2, coordPtr+4, (double) edgePtr->width, poly+4, poly+6) == 0) { changedMiterToBevel = 1; TkGetButtPoints(coordPtr, coordPtr+2, (double) edgePtr->width, 0, poly+4, poly+6); } } else { TkGetButtPoints(coordPtr, coordPtr+2, (double) edgePtr->width, 0, poly+4, poly+6); } poly[8] = poly[0]; poly[9] = poly[1]; if (TkPolygonToArea(poly, 5, rectPtr) != inside) { inside = 0; goto done; } } /* * If caps are rounded, check the cap around the final point * of the edge. */ if (edgePtr->capStyle == CapRound) { poly[0] = coordPtr[0] - radius; poly[1] = coordPtr[1] - radius; poly[2] = coordPtr[0] + radius; poly[3] = coordPtr[1] + radius; if (TkOvalToArea(poly, rectPtr) != inside) { inside = 0; goto done; } } /* * Check arrowheads, if any. */ if (edgePtr->arrow != noneUid) { if (edgePtr->arrow != lastUid) { if (TkPolygonToArea(edgePtr->firstArrowPtr, PTS_IN_ARROW, rectPtr) != inside) { inside = 0; goto done; } } if (edgePtr->arrow != firstUid) { if (TkPolygonToArea(edgePtr->lastArrowPtr, PTS_IN_ARROW, rectPtr) != inside) { inside = 0; goto done; } } } done: if ((edgePoints != staticSpace) && (edgePoints != edgePtr->coordPtr)) { ckfree((char *) edgePoints); } return inside; } /* *-------------------------------------------------------------- * * ScaleEdge -- * * This procedure is invoked to rescale a edge item. * * Results: * None. * * Side effects: * The edge referred to by itemPtr is rescaled so that the * following transformation is applied to all point * coordinates: * x' = originX + scaleX*(x-originX) * y' = originY + scaleY*(y-originY) * *-------------------------------------------------------------- */ static void ScaleEdge(canvas, itemPtr, originX, originY, scaleX, scaleY) Tk_Canvas canvas; /* Canvas containing edge. */ Tk_Item *itemPtr; /* Edge to be scaled. */ double originX, originY; /* Origin about which to scale rect. */ double scaleX; /* Amount to scale in X direction. */ double scaleY; /* Amount to scale in Y direction. */ { EdgeItem *edgePtr = (EdgeItem *) itemPtr; double *coordPtr; int i; for (i = 0, coordPtr = edgePtr->coordPtr; i < edgePtr->numPoints; i++, coordPtr += 2) { coordPtr[0] = originX + scaleX*(*coordPtr - originX); coordPtr[1] = originY + scaleY*(coordPtr[1] - originY); } if (edgePtr->firstArrowPtr != NULL) { for (i = 0, coordPtr = edgePtr->firstArrowPtr; i < PTS_IN_ARROW; i++, coordPtr += 2) { coordPtr[0] = originX + scaleX*(coordPtr[0] - originX); coordPtr[1] = originY + scaleY*(coordPtr[1] - originY); } } if (edgePtr->lastArrowPtr != NULL) { for (i = 0, coordPtr = edgePtr->lastArrowPtr; i < PTS_IN_ARROW; i++, coordPtr += 2) { coordPtr[0] = originX + scaleX*(coordPtr[0] - originX); coordPtr[1] = originY + scaleY*(coordPtr[1] - originY); } } ComputeEdgeBbox(canvas, edgePtr); } /* *-------------------------------------------------------------- * * TranslateEdge -- * * This procedure is called to move a edge by a given amount. * * Results: * None. * * Side effects: * The position of the edge is offset by (xDelta, yDelta), and * the bounding box is updated in the generic part of the item * structure. * *-------------------------------------------------------------- */ static void TranslateEdge(canvas, itemPtr, deltaX, deltaY) Tk_Canvas canvas; /* Canvas containing item. */ Tk_Item *itemPtr; /* Item that is being moved. */ double deltaX, deltaY; /* Amount by which item is to be * moved. */ { EdgeItem *edgePtr = (EdgeItem *) itemPtr; double *coordPtr; int i; for (i = 0, coordPtr = edgePtr->coordPtr; i < edgePtr->numPoints; i++, coordPtr += 2) { coordPtr[0] += deltaX; coordPtr[1] += deltaY; } if (edgePtr->firstArrowPtr != NULL) { for (i = 0, coordPtr = edgePtr->firstArrowPtr; i < PTS_IN_ARROW; i++, coordPtr += 2) { coordPtr[0] += deltaX; coordPtr[1] += deltaY; } } if (edgePtr->lastArrowPtr != NULL) { for (i = 0, coordPtr = edgePtr->lastArrowPtr; i < PTS_IN_ARROW; i++, coordPtr += 2) { coordPtr[0] += deltaX; coordPtr[1] += deltaY; } } ComputeEdgeBbox(canvas, edgePtr); } /* *-------------------------------------------------------------- * * ParseArrowShape -- * * This procedure is called back during option parsing to * parse arrow shape information. * * Results: * The return value is a standard Tcl result: TCL_OK means * that the arrow shape information was parsed ok, and * TCL_ERROR means it couldn't be parsed. * * Side effects: * Arrow information in recordPtr is updated. * *-------------------------------------------------------------- */ /* ARGSUSED */ static int ParseArrowShape(clientData, interp, tkwin, value, recordPtr, offset) ClientData clientData; /* Not used. */ Tcl_Interp *interp; /* Used for error reporting. */ Tk_Window tkwin; /* Not used. */ char *value; /* Textual specification of arrow shape. */ char *recordPtr; /* Pointer to item record in which to * store arrow information. */ int offset; /* Offset of shape information in widget * record. */ { EdgeItem *edgePtr = (EdgeItem *) recordPtr; double a, b, c; int argc; char **argv = NULL; if (offset != Tk_Offset(EdgeItem, arrowShapeA)) { panic("ParseArrowShape received bogus offset"); } if (Tcl_SplitList(interp, value, &argc, &argv) != TCL_OK) { syntaxError: Tcl_ResetResult(interp); Tcl_AppendResult(interp, "bad arrow shape \"", value, "\": must be list with three numbers", (char *) NULL); if (argv != NULL) { ckfree((char *) argv); } return TCL_ERROR; } if (argc != 3) { goto syntaxError; } if ((Tk_CanvasGetCoord(interp, edgePtr->canvas, argv[0], &a) != TCL_OK) || (Tk_CanvasGetCoord(interp, edgePtr->canvas, argv[1], &b) != TCL_OK) || (Tk_CanvasGetCoord(interp, edgePtr->canvas, argv[2], &c) != TCL_OK)) { goto syntaxError; } edgePtr->arrowShapeA = a; edgePtr->arrowShapeB = b; edgePtr->arrowShapeC = c; ckfree((char *) argv); return TCL_OK; } /* *-------------------------------------------------------------- * * PrintArrowShape -- * * This procedure is a callback invoked by the configuration * code to return a printable value describing an arrow shape. * * Results: * None. * * Side effects: * None. * *-------------------------------------------------------------- */ /* ARGSUSED */ static char * PrintArrowShape(clientData, tkwin, recordPtr, offset, freeProcPtr) ClientData clientData; /* Not used. */ Tk_Window tkwin; /* Window associated with edgePtr's widget. */ char *recordPtr; /* Pointer to item record containing current * shape information. */ int offset; /* Offset of arrow information in record. */ Tcl_FreeProc **freeProcPtr;/* Store address of procedure to call to * free string here. */ { EdgeItem *edgePtr = (EdgeItem *) recordPtr; char *buffer; buffer = ckalloc(120); sprintf(buffer, "%.5g %.5g %.5g", edgePtr->arrowShapeA, edgePtr->arrowShapeB, edgePtr->arrowShapeC); *freeProcPtr = (Tcl_FreeProc *) free; return buffer; } /* *-------------------------------------------------------------- * * ConfigureArrows -- * * If arrowheads have been requested for a edge, this * procedure makes arrangements for the arrowheads. * * Results: * A standard Tcl return value. If an error occurs, then * an error message is left in interp->result. * * Side effects: * Information in edgePtr is set up for one or two arrowheads. * the firstArrowPtr and lastArrowPtr polygons are allocated * and initialized, if need be, and the end points of the edge * are adjusted so that a thick edge doesn't stick out past * the arrowheads. * *-------------------------------------------------------------- */ /* ARGSUSED */ static int ConfigureArrows(canvas, edgePtr) Tk_Canvas canvas; /* Canvas in which arrows will be * displayed (interp and tkwin * fields are needed). */ EdgeItem *edgePtr; /* Item to configure for arrows. */ { double *poly, *coordPtr; double dx, dy, length, sinTheta, cosTheta, temp, shapeC; double fracHeight; /* Edge width as fraction of * arrowhead width. */ double backup; /* Distance to backup end points * so the edge ends in the middle * of the arrowhead. */ double vertX, vertY; /* Position of arrowhead vertex. */ /* * If there's an arrowhead on the first point of the edge, compute * its polygon and adjust the first point of the edge so that the * edge doesn't stick out past the leading edge of the arrowhead. */ shapeC = edgePtr->arrowShapeC + edgePtr->width/2.0; fracHeight = (edgePtr->width/2.0)/shapeC; backup = fracHeight*edgePtr->arrowShapeB + edgePtr->arrowShapeA*(1.0 - fracHeight)/2.0; if (edgePtr->arrow != lastUid) { poly = edgePtr->firstArrowPtr; if (poly == NULL) { poly = (double *) ckalloc((unsigned) (2*PTS_IN_ARROW*sizeof(double))); poly[0] = poly[10] = edgePtr->coordPtr[0]; poly[1] = poly[11] = edgePtr->coordPtr[1]; edgePtr->firstArrowPtr = poly; } dx = poly[0] - edgePtr->coordPtr[2]; dy = poly[1] - edgePtr->coordPtr[3]; length = hypot(dx, dy); if (length == 0) { sinTheta = cosTheta = 0.0; } else { sinTheta = dy/length; cosTheta = dx/length; } vertX = poly[0] - edgePtr->arrowShapeA*cosTheta; vertY = poly[1] - edgePtr->arrowShapeA*sinTheta; temp = shapeC*sinTheta; poly[2] = poly[0] - edgePtr->arrowShapeB*cosTheta + temp; poly[8] = poly[2] - 2*temp; temp = shapeC*cosTheta; poly[3] = poly[1] - edgePtr->arrowShapeB*sinTheta - temp; poly[9] = poly[3] + 2*temp; poly[4] = poly[2]*fracHeight + vertX*(1.0-fracHeight); poly[5] = poly[3]*fracHeight + vertY*(1.0-fracHeight); poly[6] = poly[8]*fracHeight + vertX*(1.0-fracHeight); poly[7] = poly[9]*fracHeight + vertY*(1.0-fracHeight); /* * Polygon done. Now move the first point towards the second so * that the corners at the end of the edge are inside the * arrowhead. */ edgePtr->coordPtr[0] = poly[0] - backup*cosTheta; edgePtr->coordPtr[1] = poly[1] - backup*sinTheta; } /* * Similar arrowhead calculation for the last point of the edge. */ if (edgePtr->arrow != firstUid) { coordPtr = edgePtr->coordPtr + 2*(edgePtr->numPoints-2); poly = edgePtr->lastArrowPtr; if (poly == NULL) { poly = (double *) ckalloc((unsigned) (2*PTS_IN_ARROW*sizeof(double))); poly[0] = poly[10] = coordPtr[2]; poly[1] = poly[11] = coordPtr[3]; edgePtr->lastArrowPtr = poly; } dx = poly[0] - coordPtr[0]; dy = poly[1] - coordPtr[1]; length = hypot(dx, dy); if (length == 0) { sinTheta = cosTheta = 0.0; } else { sinTheta = dy/length; cosTheta = dx/length; } vertX = poly[0] - edgePtr->arrowShapeA*cosTheta; vertY = poly[1] - edgePtr->arrowShapeA*sinTheta; temp = shapeC*sinTheta; poly[2] = poly[0] - edgePtr->arrowShapeB*cosTheta + temp; poly[8] = poly[2] - 2*temp; temp = shapeC*cosTheta; poly[3] = poly[1] - edgePtr->arrowShapeB*sinTheta - temp; poly[9] = poly[3] + 2*temp; poly[4] = poly[2]*fracHeight + vertX*(1.0-fracHeight); poly[5] = poly[3]*fracHeight + vertY*(1.0-fracHeight); poly[6] = poly[8]*fracHeight + vertX*(1.0-fracHeight); poly[7] = poly[9]*fracHeight + vertY*(1.0-fracHeight); coordPtr[2] = poly[0] - backup*cosTheta; coordPtr[3] = poly[1] - backup*sinTheta; } return TCL_OK; } /* *-------------------------------------------------------------- * * EdgeToPostscript -- * * This procedure is called to generate Postscript for * edge items. * * Results: * The return value is a standard Tcl result. If an error * occurs in generating Postscript then an error message is * left in interp->result, replacing whatever used * to be there. If no error occurs, then Postscript for the * item is appended to the result. * * Side effects: * None. * *-------------------------------------------------------------- */ static int EdgeToPostscript(interp, canvas, itemPtr, prepass) Tcl_Interp *interp; /* Leave Postscript or error message * here. */ Tk_Canvas canvas; /* Information about overall canvas. */ Tk_Item *itemPtr; /* Item for which Postscript is * wanted. */ int prepass; /* 1 means this is a prepass to * collect font information; 0 means * final Postscript is being created. */ { register EdgeItem *edgePtr = (EdgeItem *) itemPtr; char buffer[200]; char *style; if (edgePtr->fgColor == NULL) { return TCL_OK; } /* * Generate a path for the edge's center-edge (do this differently * for straight edges and smoothed edges). */ if (!edgePtr->smooth) { Tk_CanvasPsPath(interp, canvas, edgePtr->coordPtr, edgePtr->numPoints); } else { if (edgePtr->fillStipple == None) { TkMakeBezierPostscript(interp, canvas, edgePtr->coordPtr, edgePtr->numPoints); } else { /* * Special hack: Postscript printers don't appear to be able * to turn a path drawn with "curveto"s into a clipping path * without exceeding resource limits, so TkMakeBezierPostscript * won't work for stippled curves. Instead, generate all of * the intermediate points here and output them into the * Postscript file with "edgeto"s instead. */ double staticPoints[2*MAX_STATIC_POINTS]; double *pointPtr; int numPoints; numPoints = 1 + edgePtr->numPoints*edgePtr->splineSteps; pointPtr = staticPoints; if (numPoints > MAX_STATIC_POINTS) { pointPtr = (double *) ckalloc((unsigned) (numPoints * 2 * sizeof(double))); } numPoints = TkMakeBezierCurve(canvas, edgePtr->coordPtr, edgePtr->numPoints, edgePtr->splineSteps, (XPoint *) NULL, pointPtr); Tk_CanvasPsPath(interp, canvas, pointPtr, numPoints); if (pointPtr != staticPoints) { ckfree((char *) pointPtr); } } } /* * Set other edge-drawing parameters and stroke out the edge. */ sprintf(buffer, "%d setlinewidth\n", edgePtr->width); Tcl_AppendResult(interp, buffer, (char *) NULL); style = "0 setlinecap\n"; if (edgePtr->capStyle == CapRound) { style = "1 setlinecap\n"; } else if (edgePtr->capStyle == CapProjecting) { style = "2 setlinecap\n"; } Tcl_AppendResult(interp, style, (char *) NULL); style = "0 setlinejoin\n"; if (edgePtr->joinStyle == JoinRound) { style = "1 setlinejoin\n"; } else if (edgePtr->joinStyle == JoinBevel) { style = "2 setlinejoin\n"; } Tcl_AppendResult(interp, style, (char *) NULL); if (Tk_CanvasPsColor(interp, canvas, edgePtr->fgColor) != TCL_OK) { return TCL_ERROR; }; if (edgePtr->fillStipple != None) { if (Tk_CanvasPsStipple(interp, canvas, edgePtr->fillStipple) != TCL_OK) { return TCL_ERROR; } } else { Tcl_AppendResult(interp, "stroke\n", (char *) NULL); } /* * Output polygons for the arrowheads, if there are any. */ if (edgePtr->firstArrowPtr != NULL) { if (ArrowheadPostscript(interp, canvas, edgePtr, edgePtr->firstArrowPtr) != TCL_OK) { return TCL_ERROR; } } if (edgePtr->lastArrowPtr != NULL) { if (ArrowheadPostscript(interp, canvas, edgePtr, edgePtr->lastArrowPtr) != TCL_OK) { return TCL_ERROR; } } return TCL_OK; } /* *-------------------------------------------------------------- * * ArrowheadPostscript -- * * This procedure is called to generate Postscript for * an arrowhead for a edge item. * * Results: * The return value is a standard Tcl result. If an error * occurs in generating Postscript then an error message is * left in interp->result, replacing whatever used * to be there. If no error occurs, then Postscript for the * arrowhead is appended to the result. * * Side effects: * None. * *-------------------------------------------------------------- */ static int ArrowheadPostscript(interp, canvas, edgePtr, arrowPtr) Tcl_Interp *interp; /* Leave Postscript or error message * here. */ Tk_Canvas canvas; /* Information about overall canvas. */ EdgeItem *edgePtr; /* Edge item for which Postscript is * being generated. */ double *arrowPtr; /* Pointer to first of five points * describing arrowhead polygon. */ { Tk_CanvasPsPath(interp, canvas, arrowPtr, PTS_IN_ARROW); if (edgePtr->fillStipple != None) { if (Tk_CanvasPsStipple(interp, canvas, edgePtr->fillStipple) != TCL_OK) { return TCL_ERROR; } } else { Tcl_AppendResult(interp, "fill\n", (char *) NULL); } return TCL_OK; }
Go to most recent revision | Compare with Previous | Blame | View Log