URL
https://opencores.org/ocsvn/or1k/or1k/trunk
Subversion Repositories or1k
[/] [or1k/] [trunk/] [insight/] [tcl/] [generic/] [tclParse.c] - Rev 1774
Go to most recent revision | Compare with Previous | Blame | View Log
/* * tclParse.c -- * * This file contains a collection of procedures that are used * to parse Tcl commands or parts of commands (like quoted * strings or nested sub-commands). * * Copyright (c) 1987-1993 The Regents of the University of California. * Copyright (c) 1994-1997 Sun Microsystems, Inc. * * See the file "license.terms" for information on usage and redistribution * of this file, and for a DISCLAIMER OF ALL WARRANTIES. * * RCS: @(#) $Id: tclParse.c,v 1.1.1.1 2002-01-16 10:25:28 markom Exp $ */ #include "tclInt.h" #include "tclPort.h" /* * Function prototypes for procedures local to this file: */ static char * QuoteEnd _ANSI_ARGS_((char *string, char *lastChar, int term)); static char * ScriptEnd _ANSI_ARGS_((char *p, char *lastChar, int nested)); static char * VarNameEnd _ANSI_ARGS_((char *string, char *lastChar)); /* *-------------------------------------------------------------- * * TclParseQuotes -- * * This procedure parses a double-quoted string such as a * quoted Tcl command argument or a quoted value in a Tcl * expression. This procedure is also used to parse array * element names within parentheses, or anything else that * needs all the substitutions that happen in quotes. * * Results: * The return value is a standard Tcl result, which is * TCL_OK unless there was an error while parsing the * quoted string. If an error occurs then interp->result * contains a standard error message. *TermPtr is filled * in with the address of the character just after the * last one successfully processed; this is usually the * character just after the matching close-quote. The * fully-substituted contents of the quotes are stored in * standard fashion in *pvPtr, null-terminated with * pvPtr->next pointing to the terminating null character. * * Side effects: * The buffer space in pvPtr may be enlarged by calling its * expandProc. * *-------------------------------------------------------------- */ int TclParseQuotes(interp, string, termChar, flags, termPtr, pvPtr) Tcl_Interp *interp; /* Interpreter to use for nested command * evaluations and error messages. */ char *string; /* Character just after opening double- * quote. */ int termChar; /* Character that terminates "quoted" string * (usually double-quote, but sometimes * right-paren or something else). */ int flags; /* Flags to pass to nested Tcl_Eval calls. */ char **termPtr; /* Store address of terminating character * here. */ ParseValue *pvPtr; /* Information about where to place * fully-substituted result of parse. */ { register char *src, *dst, c; char *lastChar = string + strlen(string); src = string; dst = pvPtr->next; while (1) { if (dst == pvPtr->end) { /* * Target buffer space is about to run out. Make more space. */ pvPtr->next = dst; (*pvPtr->expandProc)(pvPtr, 1); dst = pvPtr->next; } c = *src; src++; if (c == termChar) { *dst = '\0'; pvPtr->next = dst; *termPtr = src; return TCL_OK; } else if (CHAR_TYPE(src-1, lastChar) == TCL_NORMAL) { copy: *dst = c; dst++; continue; } else if (c == '$') { int length; char *value; value = Tcl_ParseVar(interp, src-1, termPtr); if (value == NULL) { return TCL_ERROR; } src = *termPtr; length = strlen(value); if ((pvPtr->end - dst) <= length) { pvPtr->next = dst; (*pvPtr->expandProc)(pvPtr, length); dst = pvPtr->next; } strcpy(dst, value); dst += length; continue; } else if (c == '[') { int result; pvPtr->next = dst; result = TclParseNestedCmd(interp, src, flags, termPtr, pvPtr); if (result != TCL_OK) { return result; } src = *termPtr; dst = pvPtr->next; continue; } else if (c == '\\') { int numRead; src--; *dst = Tcl_Backslash(src, &numRead); dst++; src += numRead; continue; } else if (c == '\0') { char buf[30]; Tcl_ResetResult(interp); sprintf(buf, "missing %c", termChar); Tcl_SetResult(interp, buf, TCL_VOLATILE); *termPtr = string-1; return TCL_ERROR; } else { goto copy; } } } /* *-------------------------------------------------------------- * * TclParseNestedCmd -- * * This procedure parses a nested Tcl command between * brackets, returning the result of the command. * * Results: * The return value is a standard Tcl result, which is * TCL_OK unless there was an error while executing the * nested command. If an error occurs then interp->result * contains a standard error message. *TermPtr is filled * in with the address of the character just after the * last one processed; this is usually the character just * after the matching close-bracket, or the null character * at the end of the string if the close-bracket was missing * (a missing close bracket is an error). The result returned * by the command is stored in standard fashion in *pvPtr, * null-terminated, with pvPtr->next pointing to the null * character. * * Side effects: * The storage space at *pvPtr may be expanded. * *-------------------------------------------------------------- */ int TclParseNestedCmd(interp, string, flags, termPtr, pvPtr) Tcl_Interp *interp; /* Interpreter to use for nested command * evaluations and error messages. */ char *string; /* Character just after opening bracket. */ int flags; /* Flags to pass to nested Tcl_Eval. */ char **termPtr; /* Store address of terminating character * here. */ register ParseValue *pvPtr; /* Information about where to place * result of command. */ { int result, length, shortfall; Interp *iPtr = (Interp *) interp; iPtr->evalFlags = flags | TCL_BRACKET_TERM; result = Tcl_Eval(interp, string); *termPtr = (string + iPtr->termOffset); if (result != TCL_OK) { /* * The increment below results in slightly cleaner message in * the errorInfo variable (the close-bracket will appear). */ if (**termPtr == ']') { *termPtr += 1; } return result; } (*termPtr) += 1; length = strlen(iPtr->result); shortfall = length + 1 - (pvPtr->end - pvPtr->next); if (shortfall > 0) { (*pvPtr->expandProc)(pvPtr, shortfall); } strcpy(pvPtr->next, iPtr->result); pvPtr->next += length; Tcl_FreeResult(interp); iPtr->result = iPtr->resultSpace; iPtr->resultSpace[0] = '\0'; return TCL_OK; } /* *-------------------------------------------------------------- * * TclParseBraces -- * * This procedure scans the information between matching * curly braces. * * Results: * The return value is a standard Tcl result, which is * TCL_OK unless there was an error while parsing string. * If an error occurs then interp->result contains a * standard error message. *TermPtr is filled * in with the address of the character just after the * last one successfully processed; this is usually the * character just after the matching close-brace. The * information between curly braces is stored in standard * fashion in *pvPtr, null-terminated with pvPtr->next * pointing to the terminating null character. * * Side effects: * The storage space at *pvPtr may be expanded. * *-------------------------------------------------------------- */ int TclParseBraces(interp, string, termPtr, pvPtr) Tcl_Interp *interp; /* Interpreter to use for nested command * evaluations and error messages. */ char *string; /* Character just after opening bracket. */ char **termPtr; /* Store address of terminating character * here. */ register ParseValue *pvPtr; /* Information about where to place * result of command. */ { int level; register char *src, *dst, *end; register char c; char *lastChar = string + strlen(string); src = string; dst = pvPtr->next; end = pvPtr->end; level = 1; /* * Copy the characters one at a time to the result area, stopping * when the matching close-brace is found. */ while (1) { c = *src; src++; if (dst == end) { pvPtr->next = dst; (*pvPtr->expandProc)(pvPtr, 20); dst = pvPtr->next; end = pvPtr->end; } *dst = c; dst++; if (CHAR_TYPE(src-1, lastChar) == TCL_NORMAL) { continue; } else if (c == '{') { level++; } else if (c == '}') { level--; if (level == 0) { dst--; /* Don't copy the last close brace. */ break; } } else if (c == '\\') { int count; /* * Must always squish out backslash-newlines, even when in * braces. This is needed so that this sequence can appear * anywhere in a command, such as the middle of an expression. */ if (*src == '\n') { dst[-1] = Tcl_Backslash(src-1, &count); src += count - 1; } else { (void) Tcl_Backslash(src-1, &count); while (count > 1) { if (dst == end) { pvPtr->next = dst; (*pvPtr->expandProc)(pvPtr, 20); dst = pvPtr->next; end = pvPtr->end; } *dst = *src; dst++; src++; count--; } } } else if (c == '\0') { Tcl_SetResult(interp, "missing close-brace", TCL_STATIC); *termPtr = string-1; return TCL_ERROR; } } *dst = '\0'; pvPtr->next = dst; *termPtr = src; return TCL_OK; } /* *-------------------------------------------------------------- * * TclExpandParseValue -- * * This procedure is commonly used as the value of the * expandProc in a ParseValue. It uses malloc to allocate * more space for the result of a parse. * * Results: * The buffer space in *pvPtr is reallocated to something * larger, and if pvPtr->clientData is non-zero the old * buffer is freed. Information is copied from the old * buffer to the new one. * * Side effects: * None. * *-------------------------------------------------------------- */ void TclExpandParseValue(pvPtr, needed) register ParseValue *pvPtr; /* Information about buffer that * must be expanded. If the clientData * in the structure is non-zero, it * means that the current buffer is * dynamically allocated. */ int needed; /* Minimum amount of additional space * to allocate. */ { int newSpace; char *new; /* * Either double the size of the buffer or add enough new space * to meet the demand, whichever produces a larger new buffer. */ newSpace = (pvPtr->end - pvPtr->buffer) + 1; if (newSpace < needed) { newSpace += needed; } else { newSpace += newSpace; } new = (char *) ckalloc((unsigned) newSpace); /* * Copy from old buffer to new, free old buffer if needed, and * mark new buffer as malloc-ed. */ memcpy((VOID *) new, (VOID *) pvPtr->buffer, (size_t) (pvPtr->next - pvPtr->buffer)); pvPtr->next = new + (pvPtr->next - pvPtr->buffer); if (pvPtr->clientData != 0) { ckfree(pvPtr->buffer); } pvPtr->buffer = new; pvPtr->end = new + newSpace - 1; pvPtr->clientData = (ClientData) 1; } /* *---------------------------------------------------------------------- * * TclWordEnd -- * * Given a pointer into a Tcl command, find the end of the next * word of the command. * * Results: * The return value is a pointer to the last character that's part * of the word pointed to by "start". If the word doesn't end * properly within the string then the return value is the address * of the null character at the end of the string. * * Side effects: * None. * *---------------------------------------------------------------------- */ char * TclWordEnd(start, lastChar, nested, semiPtr) char *start; /* Beginning of a word of a Tcl command. */ char *lastChar; /* Terminating character in string. */ int nested; /* Zero means this is a top-level command. * One means this is a nested command (close * bracket is a word terminator). */ int *semiPtr; /* Set to 1 if word ends with a command- * terminating semi-colon, zero otherwise. * If NULL then ignored. */ { register char *p; int count; if (semiPtr != NULL) { *semiPtr = 0; } /* * Skip leading white space (backslash-newline must be treated like * white-space, except that it better not be the last thing in the * command). */ for (p = start; ; p++) { if (isspace(UCHAR(*p))) { continue; } if ((p[0] == '\\') && (p[1] == '\n')) { if (p+2 == lastChar) { return p+2; } continue; } break; } /* * Handle words beginning with a double-quote or a brace. */ if (*p == '"') { p = QuoteEnd(p+1, lastChar, '"'); if (p == lastChar) { return p; } p++; } else if (*p == '{') { int braces = 1; while (braces != 0) { p++; while (*p == '\\') { (void) Tcl_Backslash(p, &count); p += count; } if (*p == '}') { braces--; } else if (*p == '{') { braces++; } else if (p == lastChar) { return p; } } p++; } /* * Handle words that don't start with a brace or double-quote. * This code is also invoked if the word starts with a brace or * double-quote and there is garbage after the closing brace or * quote. This is an error as far as Tcl_Eval is concerned, but * for here the garbage is treated as part of the word. */ while (1) { if (*p == '[') { p = ScriptEnd(p+1, lastChar, 1); if (p == lastChar) { return p; } p++; } else if (*p == '\\') { if (p[1] == '\n') { /* * Backslash-newline: it maps to a space character * that is a word separator, so the word ends just before * the backslash. */ return p-1; } (void) Tcl_Backslash(p, &count); p += count; } else if (*p == '$') { p = VarNameEnd(p, lastChar); if (p == lastChar) { return p; } p++; } else if (*p == ';') { /* * Include the semi-colon in the word that is returned. */ if (semiPtr != NULL) { *semiPtr = 1; } return p; } else if (isspace(UCHAR(*p))) { return p-1; } else if ((*p == ']') && nested) { return p-1; } else if (p == lastChar) { if (nested) { /* * Nested commands can't end because of the end of the * string. */ return p; } return p-1; } else { p++; } } } /* *---------------------------------------------------------------------- * * QuoteEnd -- * * Given a pointer to a string that obeys the parsing conventions * for quoted things in Tcl, find the end of that quoted thing. * The actual thing may be a quoted argument or a parenthesized * index name. * * Results: * The return value is a pointer to the last character that is * part of the quoted string (i.e the character that's equal to * term). If the quoted string doesn't terminate properly then * the return value is a pointer to the null character at the * end of the string. * * Side effects: * None. * *---------------------------------------------------------------------- */ static char * QuoteEnd(string, lastChar, term) char *string; /* Pointer to character just after opening * "quote". */ char *lastChar; /* Terminating character in string. */ int term; /* This character will terminate the * quoted string (e.g. '"' or ')'). */ { register char *p = string; int count; while (*p != term) { if (*p == '\\') { (void) Tcl_Backslash(p, &count); p += count; } else if (*p == '[') { for (p++; *p != ']'; p++) { p = TclWordEnd(p, lastChar, 1, (int *) NULL); if (*p == 0) { return p; } } p++; } else if (*p == '$') { p = VarNameEnd(p, lastChar); if (*p == 0) { return p; } p++; } else if (p == lastChar) { return p; } else { p++; } } return p-1; } /* *---------------------------------------------------------------------- * * VarNameEnd -- * * Given a pointer to a variable reference using $-notation, find * the end of the variable name spec. * * Results: * The return value is a pointer to the last character that * is part of the variable name. If the variable name doesn't * terminate properly then the return value is a pointer to the * null character at the end of the string. * * Side effects: * None. * *---------------------------------------------------------------------- */ static char * VarNameEnd(string, lastChar) char *string; /* Pointer to dollar-sign character. */ char *lastChar; /* Terminating character in string. */ { register char *p = string+1; if (*p == '{') { for (p++; (*p != '}') && (p != lastChar); p++) { /* Empty loop body. */ } return p; } while (isalnum(UCHAR(*p)) || (*p == '_')) { p++; } if ((*p == '(') && (p != string+1)) { return QuoteEnd(p+1, lastChar, ')'); } return p-1; } /* *---------------------------------------------------------------------- * * ScriptEnd -- * * Given a pointer to the beginning of a Tcl script, find the end of * the script. * * Results: * The return value is a pointer to the last character that's part * of the script pointed to by "p". If the command doesn't end * properly within the string then the return value is the address * of the null character at the end of the string. * * Side effects: * None. * *---------------------------------------------------------------------- */ static char * ScriptEnd(p, lastChar, nested) char *p; /* Script to check. */ char *lastChar; /* Terminating character in string. */ int nested; /* Zero means this is a top-level command. * One means this is a nested command (the * last character of the script must be * an unquoted ]). */ { int commentOK = 1; int length; while (1) { while (isspace(UCHAR(*p))) { if (*p == '\n') { commentOK = 1; } p++; } if ((*p == '#') && commentOK) { do { if (*p == '\\') { /* * If the script ends with backslash-newline, then * this command isn't complete. */ if ((p[1] == '\n') && (p+2 == lastChar)) { return p+2; } Tcl_Backslash(p, &length); p += length; } else { p++; } } while ((p != lastChar) && (*p != '\n')); continue; } p = TclWordEnd(p, lastChar, nested, &commentOK); if (p == lastChar) { return p; } p++; if (nested) { if (*p == ']') { return p; } } else { if (p == lastChar) { return p-1; } } } } /* *---------------------------------------------------------------------- * * Tcl_ParseVar -- * * Given a string starting with a $ sign, parse off a variable * name and return its value. * * Results: * The return value is the contents of the variable given by * the leading characters of string. If termPtr isn't NULL, * *termPtr gets filled in with the address of the character * just after the last one in the variable specifier. If the * variable doesn't exist, then the return value is NULL and * an error message will be left in interp->result. * * Side effects: * None. * *---------------------------------------------------------------------- */ char * Tcl_ParseVar(interp, string, termPtr) Tcl_Interp *interp; /* Context for looking up variable. */ register char *string; /* String containing variable name. * First character must be "$". */ char **termPtr; /* If non-NULL, points to word to fill * in with character just after last * one in the variable specifier. */ { char *name1, *name1End, c, *result; register char *name2; #define NUM_CHARS 200 char copyStorage[NUM_CHARS]; ParseValue pv; /* * There are three cases: * 1. The $ sign is followed by an open curly brace. Then the variable * name is everything up to the next close curly brace, and the * variable is a scalar variable. * 2. The $ sign is not followed by an open curly brace. Then the * variable name is everything up to the next character that isn't * a letter, digit, or underscore, or a "::" namespace separator. * If the following character is an open parenthesis, then the * information between parentheses is the array element name, which * can include any of the substitutions permissible between quotes. * 3. The $ sign is followed by something that isn't a letter, digit, * underscore, or a "::" namespace separator: in this case, * there is no variable name, and "$" is returned. */ name2 = NULL; string++; if (*string == '{') { string++; name1 = string; while (*string != '}') { if (*string == 0) { Tcl_SetResult(interp, "missing close-brace for variable name", TCL_STATIC); if (termPtr != 0) { *termPtr = string; } return NULL; } string++; } name1End = string; string++; } else { name1 = string; while (isalnum(UCHAR(*string)) || (*string == '_') || (*string == ':')) { if (*string == ':') { if (*(string+1) == ':') { string += 2; /* skip over the initial :: */ while (*string == ':') { string++; /* skip over a subsequent : */ } } else { break; /* : by itself */ } } else { string++; } } if (string == name1) { if (termPtr != 0) { *termPtr = string; } return "$"; } name1End = string; if (*string == '(') { char *end; /* * Perform substitutions on the array element name, just as * is done for quotes. */ pv.buffer = pv.next = copyStorage; pv.end = copyStorage + NUM_CHARS - 1; pv.expandProc = TclExpandParseValue; pv.clientData = (ClientData) NULL; if (TclParseQuotes(interp, string+1, ')', 0, &end, &pv) != TCL_OK) { char msg[200]; int length; length = string-name1; if (length > 100) { length = 100; } sprintf(msg, "\n (parsing index for array \"%.*s\")", length, name1); Tcl_AddErrorInfo(interp, msg); result = NULL; name2 = pv.buffer; if (termPtr != 0) { *termPtr = end; } goto done; } Tcl_ResetResult(interp); string = end; name2 = pv.buffer; } } if (termPtr != 0) { *termPtr = string; } c = *name1End; *name1End = 0; result = Tcl_GetVar2(interp, name1, name2, TCL_LEAVE_ERR_MSG); *name1End = c; done: if ((name2 != NULL) && (pv.buffer != copyStorage)) { ckfree(pv.buffer); } return result; } /* *---------------------------------------------------------------------- * * Tcl_CommandComplete -- * * Given a partial or complete Tcl command, this procedure * determines whether the command is complete in the sense * of having matched braces and quotes and brackets. * * Results: * 1 is returned if the command is complete, 0 otherwise. * * Side effects: * None. * *---------------------------------------------------------------------- */ int Tcl_CommandComplete(cmd) char *cmd; /* Command to check. */ { char *p; if (*cmd == 0) { return 1; } p = ScriptEnd(cmd, cmd+strlen(cmd), 0); return (*p != 0); } /* *---------------------------------------------------------------------- * * TclObjCommandComplete -- * * Given a partial or complete Tcl command in a Tcl object, this * procedure determines whether the command is complete in the sense of * having matched braces and quotes and brackets. * * Results: * 1 is returned if the command is complete, 0 otherwise. * * Side effects: * None. * *---------------------------------------------------------------------- */ int TclObjCommandComplete(cmdPtr) Tcl_Obj *cmdPtr; /* Points to object holding command * to check. */ { char *cmd, *p; int length; cmd = Tcl_GetStringFromObj(cmdPtr, &length); if (length == 0) { return 1; } p = ScriptEnd(cmd, cmd+length, /*nested*/ 0); return (*p != 0); }
Go to most recent revision | Compare with Previous | Blame | View Log