URL
https://opencores.org/ocsvn/or1k/or1k/trunk
Subversion Repositories or1k
[/] [or1k/] [trunk/] [insight/] [tcl/] [tests/] [ioCmd.test] - Rev 578
Go to most recent revision | Compare with Previous | Blame | View Log
# Commands covered: open, close, gets, read, puts, seek, tell, eof, flush,
# fblocked, fconfigure, open, channel, fcopy
#
# This file contains a collection of tests for one or more of the Tcl
# built-in commands. Sourcing this file into Tcl runs the tests and
# generates output for errors. No output means no errors were found.
#
# Copyright (c) 1991-1994 The Regents of the University of California.
# Copyright (c) 1994-1996 Sun Microsystems, Inc.
#
# See the file "license.terms" for information on usage and redistribution
# of this file, and for a DISCLAIMER OF ALL WARRANTIES.
#
# RCS: @(#) $Id: ioCmd.test,v 1.1.1.1 2002-01-16 10:25:36 markom Exp $
if {[string compare test [info procs test]] == 1} then {source defs}
removeFile test1
removeFile pipe
set executable [list [info nameofexecutable]]
test iocmd-1.1 {puts command} {
list [catch {puts} msg] $msg
} {1 {wrong # args: should be "puts ?-nonewline? ?channelId? string"}}
test iocmd-1.2 {puts command} {
list [catch {puts a b c d e f g} msg] $msg
} {1 {wrong # args: should be "puts ?-nonewline? ?channelId? string"}}
test iocmd-1.3 {puts command} {
list [catch {puts froboz -nonewline kablooie} msg] $msg
} {1 {bad argument "kablooie": should be "nonewline"}}
test iocmd-1.4 {puts command} {
list [catch {puts froboz hello} msg] $msg
} {1 {can not find channel named "froboz"}}
test iocmd-1.5 {puts command} {
list [catch {puts stdin hello} msg] $msg
} {1 {channel "stdin" wasn't opened for writing}}
test iocmd-1.6 {puts command} {
set f [open test1 w]
fconfigure $f -translation lf -eofchar {}
puts -nonewline $f foobar
close $f
file size test1
} 6
test iocmd-1.7 {puts command} {
set f [open test1 w]
fconfigure $f -translation lf -eofchar {}
puts $f foobar
close $f
file size test1
} 7
test iocmd-1.8 {puts command} {
set f [open test1 w]
fconfigure $f -translation lf -eofchar {}
puts -nonewline $f [binary format a4a5 foo bar]
close $f
file size test1
} 9
test iocmd-2.1 {flush command} {
list [catch {flush} msg] $msg
} {1 {wrong # args: should be "flush channelId"}}
test iocmd-2.2 {flush command} {
list [catch {flush a b c d e} msg] $msg
} {1 {wrong # args: should be "flush channelId"}}
test iocmd-2.3 {flush command} {
list [catch {flush foo} msg] $msg
} {1 {can not find channel named "foo"}}
test iocmd-2.4 {flush command} {
list [catch {flush stdin} msg] $msg
} {1 {channel "stdin" wasn't opened for writing}}
test iocmd-3.1 {gets command} {
list [catch {gets} msg] $msg
} {1 {wrong # args: should be "gets channelId ?varName?"}}
test iocmd-3.2 {gets command} {
list [catch {gets a b c d e f g} msg] $msg
} {1 {wrong # args: should be "gets channelId ?varName?"}}
test iocmd-3.3 {gets command} {
list [catch {gets aaa} msg] $msg
} {1 {can not find channel named "aaa"}}
test iocmd-3.4 {gets command} {
list [catch {gets stdout} msg] $msg
} {1 {channel "stdout" wasn't opened for reading}}
test iocmd-3.5 {gets command} {
set f [open test1 w]
puts $f [binary format a4a5 foo bar]
close $f
set f [open test1 r]
set result [gets $f]
close $f
set x foo\x00
set x "${x}bar\x00\x00"
string compare $x $result
} 0
test iocmd-4.1 {read command} {
list [catch {read} msg] $msg
} {1 {wrong # args: should be "read channelId ?numBytes?" or "read ?-nonewline? channelId"}}
test iocmd-4.2 {read command} {
list [catch {read a b c d e f g h} msg] $msg
} {1 {wrong # args: should be "read channelId ?numBytes?" or "read ?-nonewline? channelId"}}
test iocmd-4.3 {read command} {
list [catch {read aaa} msg] $msg
} {1 {can not find channel named "aaa"}}
test iocmd-4.4 {read command} {
list [catch {read -nonewline} msg] $msg
} {1 {wrong # args: should be "read channelId ?numBytes?" or "read ?-nonewline? channelId"}}
test iocmd-4.5 {read command} {
list [catch {read -nonew file4} msg] $msg $errorCode
} {1 {can not find channel named "-nonew"} NONE}
test iocmd-4.6 {read command} {
list [catch {read stdout} msg] $msg
} {1 {channel "stdout" wasn't opened for reading}}
test iocmd-4.7 {read command} {
list [catch {read -nonewline stdout} msg] $msg
} {1 {channel "stdout" wasn't opened for reading}}
test iocmd-4.8 {read command with incorrect combination of arguments} {
removeFile test1
set f [open test1 w]
puts $f "Two lines: this one"
puts $f "and this one"
close $f
set f [open test1]
set x [list [catch {read -nonewline $f 20 z} msg] $msg $errorCode]
close $f
set x
} {1 {wrong # args: should be "read channelId ?numBytes?" or "read ?-nonewline? channelId"} NONE}
test iocmd-4.9 {read command} {
list [catch {read stdin foo} msg] $msg $errorCode
} {1 {bad argument "foo": should be "nonewline"} NONE}
test iocmd-4.10 {read command} {
list [catch {read file107} msg] $msg $errorCode
} {1 {can not find channel named "file107"} NONE}
test iocmd-4.11 {read command} {
set f [open test3 w]
set x [list [catch {read $f} msg] $msg $errorCode]
close $f
string compare [string tolower $x] \
[list 1 [format "channel \"%s\" wasn't opened for reading" $f] none]
} 0
test iocmd-4.12 {read command} {
set f [open test1]
set x [list [catch {read $f 12z} msg] $msg $errorCode]
close $f
set x
} {1 {expected integer but got "12z"} NONE}
test iocmd-5.1 {seek command} {
list [catch {seek} msg] $msg
} {1 {wrong # args: should be "seek channelId offset ?origin?"}}
test iocmd-5.2 {seek command} {
list [catch {seek a b c d e f g} msg] $msg
} {1 {wrong # args: should be "seek channelId offset ?origin?"}}
test iocmd-5.3 {seek command} {
list [catch {seek stdin gugu} msg] $msg
} {1 {expected integer but got "gugu"}}
test iocmd-5.4 {seek command} {
list [catch {seek stdin 100 gugu} msg] $msg
} {1 {bad origin "gugu": should be start, current, or end}}
test iocmd-6.1 {tell command} {
list [catch {tell} msg] $msg
} {1 {wrong # args: should be "tell channelId"}}
test iocmd-6.2 {tell command} {
list [catch {tell a b c d e} msg] $msg
} {1 {wrong # args: should be "tell channelId"}}
test iocmd-6.3 {tell command} {
list [catch {tell aaa} msg] $msg
} {1 {can not find channel named "aaa"}}
test iocmd-7.1 {close command} {
list [catch {close} msg] $msg
} {1 {wrong # args: should be "close channelId"}}
test iocmd-7.2 {close command} {
list [catch {close a b c d e} msg] $msg
} {1 {wrong # args: should be "close channelId"}}
test iocmd-7.3 {close command} {
list [catch {close aaa} msg] $msg
} {1 {can not find channel named "aaa"}}
test iocmd-8.1 {fconfigure command} {
list [catch {fconfigure} msg] $msg
} {1 {wrong # args: should be "fconfigure channelId ?optionName? ?value? ?optionName value?..."}}
test iocmd-8.2 {fconfigure command} {
list [catch {fconfigure a b c d e f} msg] $msg
} {1 {wrong # args: should be "fconfigure channelId ?optionName? ?value? ?optionName value?..."}}
test iocmd-8.3 {fconfigure command} {
list [catch {fconfigure a b} msg] $msg
} {1 {can not find channel named "a"}}
test iocmd-8.4 {fconfigure command} {
removeFile test1
set f1 [open test1 w]
set x [list [catch {fconfigure $f1 froboz} msg] $msg]
close $f1
set x
} {1 {bad option "froboz": should be one of -blocking, -buffering, -buffersize, -eofchar, or -translation}}
test iocmd-8.5 {fconfigure command} {
list [catch {fconfigure stdin -buffering froboz} msg] $msg
} {1 {bad value for -buffering: must be one of full, line, or none}}
test iocmd-8.6 {fconfigure command} {
list [catch {fconfigure stdin -translation froboz} msg] $msg
} {1 {bad value for -translation: must be one of auto, binary, cr, lf, crlf, or platform}}
test iocmd-8.7 {fconfigure command} {
removeFile test1
set f1 [open test1 w]
fconfigure $f1 -translation lf -eofchar {}
set x [fconfigure $f1]
close $f1
set x
} {-blocking 1 -buffering full -buffersize 4096 -eofchar {} -translation lf}
test iocmd-8.8 {fconfigure command} {
removeFile test1
set f1 [open test1 w]
fconfigure $f1 -translation lf -buffering line -buffersize 3030 \
-eofchar {}
set x ""
lappend x [fconfigure $f1 -buffering]
lappend x [fconfigure $f1]
close $f1
set x
} {line {-blocking 1 -buffering line -buffersize 3030 -eofchar {} -translation lf}}
test iocmd-8.9 {fconfigure command} {
removeFile test1
set f1 [open test1 w]
fconfigure $f1 -translation binary -buffering none -buffersize 4040 \
-eofchar {}
set x [fconfigure $f1]
close $f1
set x
} {-blocking 1 -buffering none -buffersize 4040 -eofchar {} -translation lf}
test iocmd-8.10 {fconfigure command} {
list [catch {fconfigure a b} msg] $msg
} {1 {can not find channel named "a"}}
test iocmd-8.11 {fconfigure command} {
list [catch {fconfigure stdout -froboz blarfo} msg] $msg
} {1 {bad option "-froboz": should be one of -blocking, -buffering, -buffersize, -eofchar, or -translation}}
test iocmd-8.12 {fconfigure command} {
list [catch {fconfigure stdout -b blarfo} msg] $msg
} {1 {bad option "-b": should be one of -blocking, -buffering, -buffersize, -eofchar, or -translation}}
test iocmd-8.13 {fconfigure command} {
list [catch {fconfigure stdout -buffer blarfo} msg] $msg
} {1 {bad option "-buffer": should be one of -blocking, -buffering, -buffersize, -eofchar, or -translation}}
test iocmd-8.14 {fconfigure command} {
fconfigure stdin -buffers
} 4096
proc iocmdSSETUP {} {
uplevel {
set srv [socket -server iocmdSRV 0];
set port [lindex [fconfigure $srv -sockname] 2];
proc iocmdSRV {sock ip port} {close $sock}
set cli [socket localhost $port];
}
}
proc iocmdSSHTDWN {} {
uplevel {
close $cli;
close $srv;
unset cli srv port
rename iocmdSRV {}
}
}
test iocmd-8.15 {fconfigure command / tcp channel} {socket} {
iocmdSSETUP
set r [list [catch {fconfigure $cli -blah} msg] $msg];
iocmdSSHTDWN
set r;
} {1 {bad option "-blah": should be one of -blocking, -buffering, -buffersize, -eofchar, -translation, -peername, or -sockname}}
test iocmd-8.16 {fconfigure command / tcp channel} {socket} {
iocmdSSETUP
set r [expr [lindex [fconfigure $cli -peername] 2]==$port];
iocmdSSHTDWN
set r
} 1
test iocmd-8.17 {fconfigure command / tcp channel} {nonPortable} {
# It is possible that you don't get the connection reset by peer
# error but rather a valid answer. depends of the tcp implementation
iocmdSSETUP
update;
puts $cli "blah"; flush $cli; # that flush could/should fail too
update;
set r [catch {fconfigure $cli -peername} msg]
iocmdSSHTDWN
regsub -all {can([^:])+: } $r {} r;
set r
} 1
test iocmd-8.18 {fconfigure command / unix tty channel} {nonPortable unixOnly} {
# might fail if /dev/ttya is unavailable
set tty [open /dev/ttya]
set r [list [catch {fconfigure $tty -blah blih} msg] $msg];
close $tty;
set r;
} {1 {bad option "-blah": should be one of -blocking, -buffering, -buffersize, -eofchar, -translation, or -mode}}
test iocmd-8.19 {fconfigure command / win tty channel} {pcOnly && !win32s} {
# None of the com port functions are implemented on Win32s.
# Also, might fail if com1 is unavailable
set tty [open com1]
set r [list [catch {fconfigure $tty -blah blih} msg] $msg];
close $tty;
set r;
} {1 {bad option "-blah": should be one of -blocking, -buffering, -buffersize, -eofchar, -translation, or -mode}}
test iocmd-9.1 {eof command} {
list [catch {eof} msg] $msg $errorCode
} {1 {wrong # args: should be "eof channelId"} NONE}
test iocmd-9.2 {eof command} {
list [catch {eof a b} msg] $msg $errorCode
} {1 {wrong # args: should be "eof channelId"} NONE}
test iocmd-9.3 {eof command} {
catch {close file100}
list [catch {eof file100} msg] $msg $errorCode
} {1 {can not find channel named "file100"} NONE}
test iocmd-10.1 {fblocked command} {
list [catch {fblocked} msg] $msg
} {1 {wrong # args: should be "fblocked channelId"}}
test iocmd-10.2 {fblocked command} {
list [catch {fblocked a b c d e f g} msg] $msg
} {1 {wrong # args: should be "fblocked channelId"}}
test iocmd-10.3 {fblocked command} {
list [catch {fblocked file1000} msg] $msg
} {1 {can not find channel named "file1000"}}
test iocmd-10.4 {fblocked command} {
list [catch {fblocked stdout} msg] $msg
} {1 {channel "stdout" wasn't opened for reading}}
test iocmd-10.5 {fblocked command} {
fblocked stdin
} 0
removeFile test5
test iocmd-11.1 {I/O to command pipelines} {unixOrPc unixExecs} {
set f [open test4 w]
close $f
list [catch {open "| cat < test4 > test5" w} msg] $msg $errorCode
} {1 {can't write input to command: standard input was redirected} NONE}
test iocmd-11.2 {I/O to command pipelines} {unixOrPc unixExecs} {
list [catch {open "| echo > test5" r} msg] $msg $errorCode
} {1 {can't read output from command: standard output was redirected} NONE}
test iocmd-11.3 {I/O to command pipelines} {unixOrPc unixExecs} {
list [catch {open "| echo > test5" r+} msg] $msg $errorCode
} {1 {can't read output from command: standard output was redirected} NONE}
test iocmd-12.1 {POSIX open access modes: RDONLY} {
removeFile test1
set f [open test1 w]
puts $f "Two lines: this one"
puts $f "and this one"
close $f
set f [open test1 RDONLY]
set x [list [gets $f] [catch {puts $f Test} msg] $msg]
close $f
string compare $x \
"{Two lines: this one} 1 [list [format "channel \"%s\" wasn't opened for writing" $f]]"
} 0
test iocmd-12.2 {POSIX open access modes: RDONLY} {
removeFile test3
string tolower [list [catch {open test3 RDONLY} msg] $msg]
} {1 {couldn't open "test3": no such file or directory}}
test iocmd-12.3 {POSIX open access modes: WRONLY} {
removeFile test3
string tolower [list [catch {open test3 WRONLY} msg] $msg]
} {1 {couldn't open "test3": no such file or directory}}
#
# Test 13.4 relies on assigning the same channel name twice.
#
test iocmd-12.4 {POSIX open access modes: WRONLY} {unixOnly} {
removeFile test3
set f [open test3 w]
fconfigure $f -eofchar {}
puts $f xyzzy
close $f
set f [open test3 WRONLY]
fconfigure $f -eofchar {}
puts -nonewline $f "ab"
seek $f 0 current
set x [list [catch {gets $f} msg] $msg]
close $f
set f [open test3 r]
fconfigure $f -eofchar {}
lappend x [gets $f]
close $f
set y [list 1 [format "channel \"%s\" wasn't opened for reading" $f] abzzy]
string compare $x $y
} 0
test iocmd-12.5 {POSIX open access modes: RDWR} {
removeFile test3
string tolower [list [catch {open test3 RDWR} msg] $msg]
} {1 {couldn't open "test3": no such file or directory}}
test iocmd-12.6 {POSIX open access modes: errors} {
concat [catch {open test3 "FOO \{BAR BAZ"} msg] $msg\n$errorInfo
} "1 unmatched open brace in list
unmatched open brace in list
while processing open access modes \"FOO {BAR BAZ\"
invoked from within
\"open test3 \"FOO \\{BAR BAZ\"\""
test iocmd-12.7 {POSIX open access modes: errors} {
list [catch {open test3 {FOO BAR BAZ}} msg] $msg
} {1 {invalid access mode "FOO": must be RDONLY, WRONLY, RDWR, APPEND, CREAT EXCL, NOCTTY, NONBLOCK, or TRUNC}}
test iocmd-12.8 {POSIX open access modes: errors} {
list [catch {open test3 {TRUNC CREAT}} msg] $msg
} {1 {access mode must include either RDONLY, WRONLY, or RDWR}}
test iocmd-13.1 {errors in open command} {
list [catch {open} msg] $msg
} {1 {wrong # args: should be "open fileName ?access? ?permissions?"}}
test iocmd-13.2 {errors in open command} {
list [catch {open a b c d} msg] $msg
} {1 {wrong # args: should be "open fileName ?access? ?permissions?"}}
test iocmd-13.3 {errors in open command} {
list [catch {open test1 x} msg] $msg
} {1 {illegal access mode "x"}}
test iocmd-13.4 {errors in open command} {
list [catch {open test1 rw} msg] $msg
} {1 {illegal access mode "rw"}}
test iocmd-13.5 {errors in open command} {
list [catch {open test1 r+1} msg] $msg
} {1 {illegal access mode "r+1"}}
test iocmd-13.6 {errors in open command} {
string tolower [list [catch {open _non_existent_} msg] $msg $errorCode]
} {1 {couldn't open "_non_existent_": no such file or directory} {posix enoent {no such file or directory}}}
test iocmd-14.1 {file id parsing errors} {
list [catch {eof gorp} msg] $msg $errorCode
} {1 {can not find channel named "gorp"} NONE}
test iocmd-14.2 {file id parsing errors} {
list [catch {eof filex} msg] $msg
} {1 {can not find channel named "filex"}}
test iocmd-14.3 {file id parsing errors} {
list [catch {eof file12a} msg] $msg
} {1 {can not find channel named "file12a"}}
test iocmd-14.4 {file id parsing errors} {
list [catch {eof file123} msg] $msg
} {1 {can not find channel named "file123"}}
test iocmd-14.5 {file id parsing errors} {
list [catch {eof stdout} msg] $msg
} {0 0}
test iocmd-14.6 {file id parsing errors} {
list [catch {eof stdin} msg] $msg
} {0 0}
test iocmd-14.7 {file id parsing errors} {
list [catch {eof stdout} msg] $msg
} {0 0}
test iocmd-14.8 {file id parsing errors} {
list [catch {eof stderr} msg] $msg
} {0 0}
test iocmd-14.9 {file id parsing errors} {
list [catch {eof stderr1} msg] $msg
} {1 {can not find channel named "stderr1"}}
set f [open test1 w]
close $f
set expect "1 {can not find channel named \"$f\"}"
test iocmd-14.10 {file id parsing errors} {
list [catch {eof $f} msg] $msg
} $expect
test iocmd-15.1 {Tcl_FcopyObjCmd} {
list [catch {fcopy} msg] $msg
} {1 {wrong # args: should be "fcopy input output ?-size size? ?-command callback?"}}
test iocmd-15.2 {Tcl_FcopyObjCmd} {
list [catch {fcopy 1} msg] $msg
} {1 {wrong # args: should be "fcopy input output ?-size size? ?-command callback?"}}
test iocmd-15.3 {Tcl_FcopyObjCmd} {
list [catch {fcopy 1 2 3 4 5 6 7} msg] $msg
} {1 {wrong # args: should be "fcopy input output ?-size size? ?-command callback?"}}
test iocmd-15.4 {Tcl_FcopyObjCmd} {
list [catch {fcopy 1 2 3} msg] $msg
} {1 {wrong # args: should be "fcopy input output ?-size size? ?-command callback?"}}
test iocmd-15.5 {Tcl_FcopyObjCmd} {
list [catch {fcopy 1 2 3 4 5} msg] $msg
} {1 {wrong # args: should be "fcopy input output ?-size size? ?-command callback?"}}
set f [open test1 w]
close $f
set rfile [open test1 r]
set wfile [open test2 w]
test iocmd-15.6 {Tcl_FcopyObjCmd} {
list [catch {fcopy foo $wfile} msg] $msg
} {1 {can not find channel named "foo"}}
test iocmd-15.7 {Tcl_FcopyObjCmd} {
list [catch {fcopy $rfile foo} msg] $msg
} {1 {can not find channel named "foo"}}
test iocmd-15.8 {Tcl_FcopyObjCmd} {
list [catch {fcopy $wfile $wfile} msg] $msg
} "1 {channel \"$wfile\" wasn't opened for reading}"
test iocmd-15.9 {Tcl_FcopyObjCmd} {
list [catch {fcopy $rfile $rfile} msg] $msg
} "1 {channel \"$rfile\" wasn't opened for writing}"
test iocmd-15.10 {Tcl_FcopyObjCmd} {
list [catch {fcopy $rfile $wfile foo bar} msg] $msg
} {1 {bad switch "foo": must be -size, or -command}}
test iocmd-15.11 {Tcl_FcopyObjCmd} {
list [catch {fcopy $rfile $wfile -size foo} msg] $msg
} {1 {expected integer but got "foo"}}
test iocmd-15.12 {Tcl_FcopyObjCmd} {
list [catch {fcopy $rfile $wfile -command bar -size foo} msg] $msg
} {1 {expected integer but got "foo"}}
close $rfile
close $wfile
removeFile test1
removeFile test2
removeFile test3
removeFile test4
# delay long enough for background processes to finish
after 500
removeFile test5
removeFile pipe
removeFile output
set x ""
set x
Go to most recent revision | Compare with Previous | Blame | View Log