URL
https://opencores.org/ocsvn/or1k/or1k/trunk
Subversion Repositories or1k
[/] [or1k/] [trunk/] [insight/] [tix/] [docs/] [FAQ.html] - Rev 1778
Go to most recent revision | Compare with Previous | Blame | View Log
<center><h1>Tix Frequently Asked Questions</h1></center>
<h3>Table of Contents</h3>
<DL>
<DT><i><b>
Legal Issues
</b></i><DD><ul>
<li> <a href=#legal.1> [L.1] </a>
Is Tix free software?
</ul><p>
<DT><i><b>
General Questions About Using The Tix Library
</b></i><DD><ul>
<li> <a href=#general.1> [G.1] </a>
What does the "<code>-disablecallback</code>"
option do?
<li> <a href=#general.2> [G.2] </a>
How do I set the width of the entry subwidget inside the tixControl widget?
<li> <a href=#general.3> [G.3] </a>
What is the "<code>setslient</code>" method?
<li> <a href=#general.4> [G.4] </a>
Is there a Tix interface builder in the works?
<li> <a href=#general.5> [G.5] </a>
Can you tell me about the syntax of tixForm
<li> <a href=#general.6> [G.6] </a>
I am not using the tixForm geometry manager, but it is giving me
errors about TixForm. What happened?
<li> <a href=#general.7> [G.7] </a>
How do I generate the <code>tclIndex</code> file for Tix?
<li> <a href=#general.8> [G.8] </a>
Can I ignore the default arguments passed by the various
<code>-command</code> and <code>-broeswcmd</code> options?
<li> <a href=#general.9> [G.9] </a>
What does <code>tixWidgetDoWhenIdle</code> do?
<li> <a href=#general.feature_req> [G.10] </a>
Why isn't such a feature in Tix? Will it be implemented?
<li> <a href=#general.softwares> [G.11] </a>
Who are using Tix in their software?
<li> <a href=#general.twice> [G.12] </a>
I am using a DirList widget. When the user clicks on an item, the
procedure of my <code>-browsecmd</code> gets called
twice. However, I just want it to be called once.
<li> <a href=#general.destroy> [G.13] </a>
I get an error <i>"can't read data(-value): no such element in
array</i>" when I use the tixExFileSelectDialog.
</ul><p>
<DT><i><b>
Question About Porting to Specific Platforms/Software
</b></i><DD><ul>
<li> <a href=#port.1> [P.1] </a>
The configure script gave me strange errors.
<li> <a href=#port.tk41> [P.2] </a>
Does Tix 4.1 work with <b>Tk 4.1</b>
<li> <a href=#port.itcl> [P.3] </a>
Does Tix work with <b>Incr Tcl 2.0</b>?
<li> <a href=#port.expect> [P.4] </a>
How do I get Tix to work with <b>Expect</b>?
<li> <a href=#port.6> [P.5] </a>
<b>Solaris 2.4:</b>
Filenames in FileSelectBox are chopped off.
<li> <a href=#port.7> [P.6] </a>
Do I still need libXpm?
<li> <a href=#port.8> [P.7] </a>
<a name=coredump1>I get a coredump as soon as tixwish starts up.
</ul><p>
<DT><i><b>
Porting from Tix 3.6 to Tix 4.x
</b></i><DD><ul>
<li> <a href=#tix36to40.1> [X.1] </a>
What happened to the <code>tixInit</code> command?
<li> <a href=#tix36to40.2> [X.2] </a>
How do I set the schemes and fontsets in Tix 4.x?
<li> <a href=#tix36to40.3> [X.3] </a>
How do I choose the default TK color schemes and fontsets? Tix is
messing up the colors of my existing programs.
<li> <a href=#tix36to40.4> [X.4] </a>
I want the old bisque look of Tk 3.6. tk_bisque doesn't work.
</ul><p>
</DL>
<hr>
<h3>
Legal Issues
</h3>
<DL>
<DT> <b><a name=legal.1> [L.1] </a>
Is Tix free software?
</b><p>
<DD>
<b> ANSWER: </b>
Tix is distributed under the same license as Tcl/Tk (a.k.a. BSD
style license). Application developers can freely redistribute
Tix along with their products. <p>
We will continue to provide free technical support and
maintainence for Tix. However, to recover the development costs,
we would appreciate financial supports for the Tix user
community. If you like Tix and would like to make a donation to
the Tix Project, please send mail to <a
href="mailto:xpi@xpi.com">xpi@xpi.com</a>. <p>
<p>
</DL>
<hr>
<h3>
General Questions About Using The Tix Library
</h3>
<DL>
<DT> <b><a name=general.1> [G.1] </a>
What does the "<code>-disablecallback</code>"
option do?
</b><p>
<DD>
<b> ANSWER: </b>
Many Tix widgets have both a <code>-value</code> option and a
<code>-command</code> option. Any modification of the
<code>-value</code> will cause the <code>-command</code> callback
to be executed. Sometimes this is undesirable. For example,
calling "<code>config -value</code>" inside the callback procedure
will cause the callback to be re-entered and thus an infinite
recursion. <p>
The <code>-disablecallback</code> can be used to advoid this
problem. When this option is set, the <code>-command</code>
callback will not be executed even if the -value of a widget is
changed. Therefore, if you need to modify the -value of a widget
inside its callback, do this:
<blockquote><pre>
proc my_callback {w} {
$w config -disablecallback true
$w config value blah
$w config -disablecallback false
}
</pre></blockquote>
If you find this too troublesome, you can call the command tixSetSilent:
<blockquote><pre>
proc my_callback {w} {
tixSetSilent $w blah
}
</pre></blockquote>
<p>
<DT> <b><a name=general.2> [G.2] </a>
How do I set the width of the entry subwidget inside the tixControl widget?
</b><p>
<DD>
<b> ANSWER: </b>
You can use the option database or the -options flag to set the
configuration options of the subwidgets. E.g: <pre>
option add *TixControl*entry.width 10
</pre>
OR
<pre>
tixControl .c -options {
entry.width 10
}
</pre>
<p>
<DT> <b><a name=general.3> [G.3] </a>
What is the "<code>setslient</code>" method?
</b><p>
<DD>
<b> ANSWER: </b>
This is an obsolete method. You could use it to achieve the same
effect as the <code>-disablecallback</code> option.
<code>selsilent</code> used to be a widget command for the
ComboBox, Control, etc. It has been removed since Tix 4.0a4 and
replaced by the <code>tixSetSilent</code> command. Please note
that <code>tixSetSilent</code> is not a widget command but an
external procedure.
<p>
<DT> <b><a name=general.4> [G.4] </a>
Is there a Tix interface builder in the works?
</b><p>
<DD>
<b> ANSWER: </b>
Yes. But I don't know when it will be finished. (probably in 96).
<p>
<DT> <b><a name=general.5> [G.5] </a>
Can you tell me about the syntax of tixForm
</b><p>
<DD>
<b> ANSWER: </b>
Please see the file <a href="../man/Form.html">man/Form.html</a>
or <a href="../man/Form.n">man/Form.n</a>.
<p>
<DT> <b><a name=general.6> [G.6] </a>
I am not using the tixForm geometry manager, but it is giving me
errors about TixForm. What happened?
</b><p>
<DD>
<b> ANSWER: </b>
When you get error messages like this:
<pre> (TixForm) Error:Trying to use more than one geometry
manager for the same master window.
Giving up after 50 iterations.</pre>
Most likely, the problem is when using tixLabelFrame widgets, you
packed to the wrong frame: <p>
This is WRONG:
<pre> tixLabelFrame .d
button .d.b
pack .d.b </pre>
This is the correct way:
<pre> tixLabelFrame .d
set f [.d subwidget frame]
button $f.b
pack $f.b
pack .d </pre>
Remember you don't pack directly into a TixLabelFrame
widget. Instead, you should pack into its <code>frame</code>
subwidget.
<p>
<DT> <b><a name=general.7> [G.7] </a>
How do I generate the <code>tclIndex</code> file for Tix?
</b><p>
<DD>
<b> ANSWER: </b>
Tix <code>tclIndex</code> files cannot be generated using the
standard auto_mkindex procedure. You must use the tixindex program
in the <code>tools/</code> subdirectory in the Tix
distribution. The syntax is
<pre> tixindex *.tcl
</pre>
<p>
<DT> <b><a name=general.8> [G.8] </a>
Can I ignore the default arguments passed by the various
<code>-command</code> and <code>-broeswcmd</code> options?
</b><p>
<DD>
<b> ANSWER: </b>
You can use the <code>tixBreak</code> command. For example:
<pre> tixFileSelectDialog .c -command "puts foo; tixBreak" </pre>
<p>
<DT> <b><a name=general.9> [G.9] </a>
What does <code>tixWidgetDoWhenIdle</code> do?
</b><p>
<DD>
<b> ANSWER: </b>
It does the same thing as tixDoWhileIdle (and "after -idle"). The
difference is it takes its second argument as the name of a widget
and executes this command only if the widget exists: i.e.:
<pre> tixWidgetDoWhenIdle tixComboBox::Update $w blah blah ..</pre>
will execute tixComboBox::Update only if $w exists. $w may be
destroyed after tixWidgetDoWhenIdle is called but before an idle
event happens.
<p>
<DT> <b><a name=general.feature_req> [G.10] </a>
Why isn't such a feature in Tix? Will it be implemented?
</b><p>
<DD>
<b> ANSWER: </b>
Generally requests for new features are welcomed. You can send
your requests to <a href=mailto:tix@xpi.com> tix@xpi.com </a> and
we'll be happy to hear from you. <p>
We can't guarantee to implement the requested features
immediately. Usually it depends on how important the features. If
the feature is requested by more people, it will usually get done
faster.
However, some frequently requested features probably won't be
imlemented. Usually these features are cosmetic changes and:
<ul>
<li> they do not add new capability to the widgets
<li> they are not universally liked
<li> they confuse the user.
</ul>
<p>
Some examples are:
<ul>
<li> <b>Different foreground and background colors for the
NoteBook tabs</b>: having a lot of colors may antagonize the users
that are "color haters"; also, the different colors don't make it
easier for the user to locate the desired tab.
<li> <b>Ring-binder metaphore for the NoteBook widget</b>: a waste
of screen real estate.
<li> <b>Rows of tabs for the NoteBook widget</b>: the user may be
confused when the rows of tabs are switched. If you need to have a
lot of tabs for the notebook, use the ListNoteBook widget instead.
</ul>
<p>
<DT> <b><a name=general.softwares> [G.11] </a>
Who are using Tix in their software?
</b><p>
<DD>
<b> ANSWER: </b>
I have compiled a list of softwares that use Tix. See <a
href=http://www.xpi.com/tix/software.html>
http://www.xpi.com/tix/software.html</a>. (These are only the ones
that I have heard of, either from the authors themselves or from
the TCL FAQ. There should be more of them).
<p>
<DT> <b><a name=general.twice> [G.12] </a>
I am using a DirList widget. When the user clicks on an item, the
procedure of my <code>-browsecmd</code> gets called
twice. However, I just want it to be called once.
</b><p>
<DD>
<b> ANSWER: </b>
The <code>-browsecmd</code> procedure is triggered by three types
of events: <code><1></code>,
<code><ButtonRelease-1></code>, and
<code><B1-Motion></code>. When the user clicks on an entry,
a <code><1></code> and a
<code><ButtonRelease-1></code> event will happen in rapid
session, which causes your <code>-browsecmd</code> procedure to be
called twice. <p>
A crude fix for this problem is to ignore all the
<code><ButtonRelease-1></code> events. You can find out the
event that triggers the <code>-browsecmd</code> procedure by the
<code>tixEvent</code> command. Here is an example:
<blockquote><pre>
tixDirList .c -browsecmd Browse
proc Browse {args} {
if {[tixEvent type] == "<code><ButtonRelease-1></code>"} {
return
}
# ....
}
</pre></blockquote>
However, the above solution is not perfect. For example, if the
user clicks down the button at entry one, drags it over entries
two and three and release it on top of entry three, the following
events may be caused: <p>
<ol>
<li> <code><1></code> on entry one.
<li> <code><B1-Motion></code> on entry two.
<li> <code><ButtonRelease-1></code> on entry three.
</ol> <p>
Therefore, if you use the above method, the browse event on entry
three will be lost! <p>
To devise a better solution, it's better to understand the basic
design conventions of a Tix-based GUI. Suppose we have a list of
entries displayed in a listbox (or DirList, or HList). When the
user clicks on an entry, the GUI usually responds by displaying a
"<b>detailed view</b>" of the entry. For example, if we put a list
of file names in a listbox, when the user clicks on a file name,
we display the contents of the file in a text window. If the user
then clicks on another file name, the text window will load in the
contents of the new file. <p>
Now what happens if the user clicks on the same entry twice? Do we
reload the contents of the file into the text window? This is
usually unnecessary, inefficient and probably not what the user
wants to do. The Tix convention is, when the user clicks on the
same entry again, the detail view is not updated. If the user
wants to force an update (e.g, the user knows the file's contents
has been changed and wants to see the new version), he or she can
double-click on the entry and the application will respond by
redisplaying the detail view (reloading the file). <p>
To implement this policy, the Browse procedure should be modified
as the following:
<blockquote><pre>
proc Browse {args} {
global currentView
set ent [tixEvent value]
if {$ent == $currentView} {
# We have already displayed the detailed view of $ent.
#
return
} else {
set currentView $ent
DisplayDetail $ent
}
}
</pre></blockquote> <p>
<p>
<DT> <b><a name=general.destroy> [G.13] </a>
I get an error <i>"can't read data(-value): no such element in
array</i>" when I use the tixExFileSelectDialog.
</b><p>
<DD>
<b> ANSWER: </b>
If you use tixExFileSelectDialog like this:
<pre>
tixExFileSelectDialog .f -command foo
foo {filename} {
destroy .f
do some other stuff ...
}
</pre>
it will cause a Tcl error because the dialog assumes that it still
exists after calling your command. This usually result in errors like
this:
<pre>
can't read "data(-value)": no such element in array
while executing
"set data(-selection) $data(-value)..."
(procedure "tixComboBox::SetValue" line 30)
</pre>
This "feature" is built into many Tix widgets and can't be fixed
easily. To work around the problem, never destroy widgets inside
-command calls. Usually you should unmap toplevel windows
instead. If you must destroy widgets, do it with an "after"
command. For example, the foo procedure should be rewritten as:
<pre>
foo {filename} {
wm withdraw .f
do some other stuff ...
after idle {if [winfo exists .f] {destroy .f}}
}
</pre>
Execute the "after" command at the very end of the
-command. Otherwise the idle handler may be activated by some
"update" calls.
<p>
</DL>
<hr>
<h3>
Question About Porting to Specific Platforms/Software
</h3>
<DL>
<DT> <b><a name=port.1> [P.1] </a>
The configure script gave me strange errors.
</b><p>
<DD>
<b> ANSWER: </b>
The problem may be you have several operating systems sharing the
same file system. Some people encounter error messages like this:
<blockquote><pre>
# ./configure --prefix=/usr/vendor/tcl
loading cache ./config.cache
checking for a BSD compatible install... /usr/bin/installbsd -c
checking for ranlib... ranlib
checking how to run the C preprocessor... cc -E
checking for unistd.h... ./configure[603]: "${ac_cv_header_$ac_safe+set}": bad
substitution
</pre></blockquote>
The problem is at line 2, configure loaded in ./config.cache,
which may have been created by a different operating system, with
settings only usuable for that operating system. To get around
this, you should type
<blockquote><pre>
make distclean
./configure
make all
</pre></blockquote>
<p>
<DT> <b><a name=port.tk41> [P.2] </a>
Does Tix 4.1 work with <b>Tk 4.1</b>
</b><p>
<DD>
<b> ANSWER: </b>
Yes, just enable the "Tk 4.1 ..." option in the setup program. It
will also compile Tix in a dynamic lobrary.
<p>
<DT> <b><a name=port.itcl> [P.3] </a>
Does Tix work with <b>Incr Tcl 2.0</b>?
</b><p>
<DD>
<b> ANSWER: </b>
Yes just enable the "Itcl 2.0 ..." option in the setup
program. Make sure you have ITcl 2.0 installed. Beta versions will
*NOT* work. Also make sure you have installed the source tree of
ITcl 2.0 in the same directory where you install the Tix source
tree.
<p>
<DT> <b><a name=port.expect> [P.4] </a>
How do I get Tix to work with <b>Expect</b>?
</b><p>
<DD>
<b> ANSWER: </b>
From Paul Schmidt (kuato@netcom.com):
<blockquote>
I have integrated Tcl7.4, Tk4.0, Expect-5.19 and Tix4.0 on Linux
1.2.13 (ELF) and Solaris 2.4. It isn't too hard. For an
expectk+Tix binary you need to add a call to Tix_Init in
exp_main_tk.c. If you can find the call to Tk_Init then just
cut&paste and replace it with Tix_Init. Do the same if you want a
Tk+Tix window shell in TkAppInit.c. Worked like a charm. If you
have any problems just holler.
</blockquote>
<p>
<DT> <b><a name=port.6> [P.5] </a>
<b>Solaris 2.4:</b>
Filenames in FileSelectBox are chopped off.
</b><p>
<DD>
<b> ANSWER: </b>
<b>Problem:</b>
<blockquote>
With Tix4.0a7 (and also with Tix4.0a6) on Solaris 2.4, when
running the widget demo, in tixFileSelectBox, in the two scolling
lists (for Files an Directories), some of the file and directory
names have their first 2 letters chopped off. And some files are
repeated.
</blockquote>
<b>Solution:</b> tixwish has some conflicts with /usr/ucblib/libucb.so.1
and you should not linke it tixwish (you don't need it). Here is
a solution provided by Charles L Ditzel
(<i>charles@hanami.cyberspace.com</i>):
<blockquote>
To fix the problem I was having, all I did was:
<pre>
unsetenv LD_LIBRARY_PATH
set my PATH to something basic like:
/usr/bin:/usr/ccs/bin:/bin:/usr/openwin/bin:/opt/SUNWspro/bin
removed config.cache
./configure
make clean
make
</pre>
and now it works!! Must have been something in my old
<code>PATH</code> or <code>LD_LIBRARY_PATH</code> that was
causing it to pick up <code>/usr/ucblib/libucb.so</code>.
</blockquote>
<p>
<DT> <b><a name=port.7> [P.6] </a>
Do I still need libXpm?
</b><p>
<DD>
<b> ANSWER: </b>
No, now Tix has its own XPM file reader. You no longer need libXpm.
<p>
<DT> <b><a name=port.8> [P.7] </a>
<a name=coredump1>I get a coredump as soon as tixwish starts up.
</b><p>
<DD>
<b> ANSWER: </b>
Try to get a backtrace of the stack when the core dump happens
(with a debugger, for example). If the core dump happens right
inside the call to <code>Tk_ConfigureWidget()</code> inside the
file <code>tixInit.c</code>, then the problem is because you
compiled <code>libtk.a</code> and <code>libtix.a</code> with
different versions of the Th header file
<code>tk.h</code>. Delete all the <code>.o</code> files from the
src directory of Tix, fix the Makefile so that now you can
compile <code>libtix.a</code> with the same tk.h that you used to
compile <code>libtk.a</code>.
<p>
</DL>
<hr>
<h3>
Porting from Tix 3.6 to Tix 4.x
</h3>
<DL>
<DT> <b><a name=tix36to40.1> [X.1] </a>
What happened to the <code>tixInit</code> command?
</b><p>
<DD>
<b> ANSWER: </b>
You don't need to use it anymore. It is provided in Tix 4.x only for
backward compatibility.
<p>
<DT> <b><a name=tix36to40.2> [X.2] </a>
How do I set the schemes and fontsets in Tix 4.x?
</b><p>
<DD>
<b> ANSWER: </b>
You can set the color schemes and fontsets using the standard X
resource database (.Xdefaults file). You can add these two lines
in the user's .Xdefaults file: <pre>
*TixScheme: Gray
*TixFontSet: 14Point </pre>
If you want to switch color schemes and fontsets during run time,
you can issue the following commands: <pre>
tix config -scheme Gray -fontset 14Point
</pre>
Please read the <a href=../man/tix.html>tix</a> manual page for
more details
<p>
<DT> <b><a name=tix36to40.3> [X.3] </a>
How do I choose the default TK color schemes and fontsets? Tix is
messing up the colors of my existing programs.
</b><p>
<DD>
<b> ANSWER: </b>
Add these two lines in your .Xdefaults:<pre>
*TixScheme: TK
*TixFontSet: TK </pre>
<p>
<DT> <b><a name=tix36to40.4> [X.4] </a>
I want the old bisque look of Tk 3.6. tk_bisque doesn't work.
</b><p>
<DD>
<b> ANSWER: </b>
The Tix widgets are not compatible with tk_bisque. If you want a
bisque-ish look you can add to your .Xdefaults file the following
line:<pre>
*TixScheme: Bisque</pre>
<p>
</DL>
Go to most recent revision | Compare with Previous | Blame | View Log