URL
https://opencores.org/ocsvn/or1k/or1k/trunk
Subversion Repositories or1k
[/] [or1k/] [trunk/] [linux/] [linux-2.4/] [Documentation/] [DocBook/] [procfs-guide.tmpl] - Rev 1765
Compare with Previous | Blame | View Log
<!-- -*- sgml -*- -->
<!DOCTYPE book PUBLIC "-//OASIS//DTD DocBook V3.1//EN"[
<!ENTITY procfsexample SYSTEM "procfs_example.sgml">
]>
<book id="LKProcfsGuide">
<bookinfo>
<title>Linux Kernel Procfs Guide</title>
<authorgroup>
<author>
<firstname>Erik</firstname>
<othername>(J.A.K.)</othername>
<surname>Mouw</surname>
<affiliation>
<orgname>Delft University of Technology</orgname>
<orgdiv>Faculty of Information Technology and Systems</orgdiv>
<address>
<email>J.A.K.Mouw@its.tudelft.nl</email>
<pob>PO BOX 5031</pob>
<postcode>2600 GA</postcode>
<city>Delft</city>
<country>The Netherlands</country>
</address>
</affiliation>
</author>
</authorgroup>
<revhistory>
<revision>
<revnumber>1.0 </revnumber>
<date>May 30, 2001</date>
<revremark>Initial revision posted to linux-kernel</revremark>
</revision>
<revision>
<revnumber>1.1 </revnumber>
<date>June 3, 2001</date>
<revremark>Revised after comments from linux-kernel</revremark>
</revision>
</revhistory>
<copyright>
<year>2001</year>
<holder>Erik Mouw</holder>
</copyright>
<legalnotice>
<para>
This documentation is free software; you can redistribute it
and/or modify it under the terms of the GNU General Public
License as published by the Free Software Foundation; either
version 2 of the License, or (at your option) any later
version.
</para>
<para>
This documentation is distributed in the hope that it will be
useful, but WITHOUT ANY WARRANTY; without even the implied
warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR
PURPOSE. See the GNU General Public License for more details.
</para>
<para>
You should have received a copy of the GNU General Public
License along with this program; if not, write to the Free
Software Foundation, Inc., 59 Temple Place, Suite 330, Boston,
MA 02111-1307 USA
</para>
<para>
For more details see the file COPYING in the source
distribution of Linux.
</para>
</legalnotice>
</bookinfo>
<toc>
</toc>
<preface>
<title>Preface</title>
<para>
This guide describes the use of the procfs file system from
within the Linux kernel. The idea to write this guide came up on
the #kernelnewbies IRC channel (see <ulink
url="http://www.kernelnewbies.org/">http://www.kernelnewbies.org/</ulink>),
when Jeff Garzik explained the use of procfs and forwarded me a
message Alexander Viro wrote to the linux-kernel mailing list. I
agreed to write it up nicely, so here it is.
</para>
<para>
I'd like to thank Jeff Garzik
<email>jgarzik@pobox.com</email> and Alexander Viro
<email>viro@math.psu.edu</email> for their input, Tim Waugh
<email>twaugh@redhat.com</email> for his <ulink
url="http://people.redhat.com/twaugh/docbook/selfdocbook/">Selfdocbook</ulink>,
and Marc Joosen <email>marcj@historia.et.tudelft.nl</email> for
proofreading.
</para>
<para>
This documentation was written while working on the LART
computing board (<ulink
url="http://www.lart.tudelft.nl/">http://www.lart.tudelft.nl/</ulink>),
which is sponsored by the Mobile Multi-media Communications
(<ulink
url="http://www.mmc.tudelft.nl/">http://www.mmc.tudelft.nl/</ulink>)
and Ubiquitous Communications (<ulink
url="http://www.ubicom.tudelft.nl/">http://www.ubicom.tudelft.nl/</ulink>)
projects.
</para>
<para>
Erik
</para>
</preface>
<chapter id="intro">
<title>Introduction</title>
<para>
The <filename class="directory">/proc</filename> file system
(procfs) is a special file system in the linux kernel. It's a
virtual file system: it is not associated with a block device
but exists only in memory. The files in the procfs are there to
allow userland programs access to certain information from the
kernel (like process information in <filename
class="directory">/proc/[0-9]+/</filename>), but also for debug
purposes (like <filename>/proc/ksyms</filename>).
</para>
<para>
This guide describes the use of the procfs file system from
within the Linux kernel. It starts by introducing all relevant
functions to manage the files within the file system. After that
it shows how to communicate with userland, and some tips and
tricks will be pointed out. Finally a complete example will be
shown.
</para>
<para>
Note that the files in <filename
class="directory">/proc/sys</filename> are sysctl files: they
don't belong to procfs and are governed by a completely
different API described in the Kernel API book.
</para>
</chapter>
<chapter id="managing">
<title>Managing procfs entries</title>
<para>
This chapter describes the functions that various kernel
components use to populate the procfs with files, symlinks,
device nodes, and directories.
</para>
<para>
A minor note before we start: if you want to use any of the
procfs functions, be sure to include the correct header file!
This should be one of the first lines in your code:
</para>
<programlisting>
#include <linux/proc_fs.h>
</programlisting>
<sect1 id="regularfile">
<title>Creating a regular file</title>
<funcsynopsis>
<funcprototype>
<funcdef>struct proc_dir_entry* <function>create_proc_entry</function></funcdef>
<paramdef>const char* <parameter>name</parameter></paramdef>
<paramdef>mode_t <parameter>mode</parameter></paramdef>
<paramdef>struct proc_dir_entry* <parameter>parent</parameter></paramdef>
</funcprototype>
</funcsynopsis>
<para>
This function creates a regular file with the name
<parameter>name</parameter>, file mode
<parameter>mode</parameter> in the directory
<parameter>parent</parameter>. To create a file in the root of
the procfs, use <constant>NULL</constant> as
<parameter>parent</parameter> parameter. When successful, the
function will return a pointer to the freshly created
<structname>struct proc_dir_entry</structname>; otherwise it
will return <constant>NULL</constant>. <xref
linkend="userland"> describes how to do something useful with
regular files.
</para>
<para>
Note that it is specifically supported that you can pass a
path that spans multiple directories. For example
<function>create_proc_entry</function>(<parameter>"drivers/via0/info"</parameter>)
will create the <filename class="directory">via0</filename>
directory if necessary, with standard
<constant>0755</constant> permissions.
</para>
<para>
If you only want to be able to read the file, the function
<function>create_proc_read_entry</function> described in <xref
linkend="convenience"> may be used to create and initialise
the procfs entry in one single call.
</para>
</sect1>
<sect1>
<title>Creating a symlink</title>
<funcsynopsis>
<funcprototype>
<funcdef>struct proc_dir_entry*
<function>proc_symlink</function></funcdef> <paramdef>const
char* <parameter>name</parameter></paramdef>
<paramdef>struct proc_dir_entry*
<parameter>parent</parameter></paramdef> <paramdef>const
char* <parameter>dest</parameter></paramdef>
</funcprototype>
</funcsynopsis>
<para>
This creates a symlink in the procfs directory
<parameter>parent</parameter> that points from
<parameter>name</parameter> to
<parameter>dest</parameter>. This translates in userland to
<literal>ln -s</literal> <parameter>dest</parameter>
<parameter>name</parameter>.
</para>
</sect1>
<sect1>
<title>Creating a device</title>
<funcsynopsis>
<funcprototype>
<funcdef>struct proc_dir_entry* <function>proc_mknod</function></funcdef>
<paramdef>const char* <parameter>name</parameter></paramdef>
<paramdef>mode_t <parameter>mode</parameter></paramdef>
<paramdef>struct proc_dir_entry* <parameter>parent</parameter></paramdef>
<paramdef>kdev_t <parameter>rdev</parameter></paramdef>
</funcprototype>
</funcsynopsis>
<para>
Creates a device file <parameter>name</parameter> with mode
<parameter>mode</parameter> in the procfs directory
<parameter>parent</parameter>. The device file will work on
the device <parameter>rdev</parameter>, which can be generated
by using the <literal>MKDEV</literal> macro from
<literal>linux/kdev_t.h</literal>. The
<parameter>mode</parameter> parameter
<emphasis>must</emphasis> contain <constant>S_IFBLK</constant>
or <constant>S_IFCHR</constant> to create a device
node. Compare with userland <literal>mknod
--mode=</literal><parameter>mode</parameter>
<parameter>name</parameter> <parameter>rdev</parameter>.
</para>
</sect1>
<sect1>
<title>Creating a directory</title>
<funcsynopsis>
<funcprototype>
<funcdef>struct proc_dir_entry* <function>proc_mkdir</function></funcdef>
<paramdef>const char* <parameter>name</parameter></paramdef>
<paramdef>struct proc_dir_entry* <parameter>parent</parameter></paramdef>
</funcprototype>
</funcsynopsis>
<para>
Create a directory <parameter>name</parameter> in the procfs
directory <parameter>parent</parameter>.
</para>
</sect1>
<sect1>
<title>Removing an entry</title>
<funcsynopsis>
<funcprototype>
<funcdef>void <function>remove_proc_entry</function></funcdef>
<paramdef>const char* <parameter>name</parameter></paramdef>
<paramdef>struct proc_dir_entry* <parameter>parent</parameter></paramdef>
</funcprototype>
</funcsynopsis>
<para>
Removes the entry <parameter>name</parameter> in the directory
<parameter>parent</parameter> from the procfs. Entries are
removed by their <emphasis>name</emphasis>, not by the
<structname>struct proc_dir_entry</structname> returned by the
various create functions. Note that this function doesn't
recursively remove entries.
</para>
<para>
Be sure to free the <structfield>data</structfield> entry from
the <structname>struct proc_dir_entry</structname> before
<function>remove_proc_entry</function> is called (that is: if
there was some <structfield>data</structfield> allocated, of
course). See <xref linkend="usingdata"> for more information
on using the <structfield>data</structfield> entry.
</para>
</sect1>
</chapter>
<chapter id="userland">
<title>Communicating with userland</title>
<para>
Instead of reading (or writing) information directly from
kernel memory, procfs works with <emphasis>call back
functions</emphasis> for files: functions that are called when
a specific file is being read or written. Such functions have
to be initialised after the procfs file is created by setting
the <structfield>read_proc</structfield> and/or
<structfield>write_proc</structfield> fields in the
<structname>struct proc_dir_entry*</structname> that the
function <function>create_proc_entry</function> returned:
</para>
<programlisting>
struct proc_dir_entry* entry;
entry->read_proc = read_proc_foo;
entry->write_proc = write_proc_foo;
</programlisting>
<para>
If you only want to use a the
<structfield>read_proc</structfield>, the function
<function>create_proc_read_entry</function> described in <xref
linkend="convenience"> may be used to create and initialise the
procfs entry in one single call.
</para>
<sect1>
<title>Reading data</title>
<para>
The read function is a call back function that allows userland
processes to read data from the kernel. The read function
should have the following format:
</para>
<funcsynopsis>
<funcprototype>
<funcdef>int <function>read_func</function></funcdef>
<paramdef>char* <parameter>page</parameter></paramdef>
<paramdef>char** <parameter>start</parameter></paramdef>
<paramdef>off_t <parameter>off</parameter></paramdef>
<paramdef>int <parameter>count</parameter></paramdef>
<paramdef>int* <parameter>eof</parameter></paramdef>
<paramdef>void* <parameter>data</parameter></paramdef>
</funcprototype>
</funcsynopsis>
<para>
The read function should write its information into the
<parameter>page</parameter>. For proper use, the function
should start writing at an offset of
<parameter>off</parameter> in <parameter>page</parameter> and
write at most <parameter>count</parameter> bytes, but because
most read functions are quite simple and only return a small
amount of information, these two parameters are usually
ignored (it breaks pagers like <literal>more</literal> and
<literal>less</literal>, but <literal>cat</literal> still
works).
</para>
<para>
If the <parameter>off</parameter> and
<parameter>count</parameter> parameters are properly used,
<parameter>eof</parameter> should be used to signal that the
end of the file has been reached by writing
<literal>1</literal> to the memory location
<parameter>eof</parameter> points to.
</para>
<para>
The parameter <parameter>start</parameter> doesn't seem to be
used anywhere in the kernel. The <parameter>data</parameter>
parameter can be used to create a single call back function for
several files, see <xref linkend="usingdata">.
</para>
<para>
The <function>read_func</function> function must return the
number of bytes written into the <parameter>page</parameter>.
</para>
<para>
<xref linkend="example"> shows how to use a read call back
function.
</para>
</sect1>
<sect1>
<title>Writing data</title>
<para>
The write call back function allows a userland process to write
data to the kernel, so it has some kind of control over the
kernel. The write function should have the following format:
</para>
<funcsynopsis>
<funcprototype>
<funcdef>int <function>write_func</function></funcdef>
<paramdef>struct file* <parameter>file</parameter></paramdef>
<paramdef>const char* <parameter>buffer</parameter></paramdef>
<paramdef>unsigned long <parameter>count</parameter></paramdef>
<paramdef>void* <parameter>data</parameter></paramdef>
</funcprototype>
</funcsynopsis>
<para>
The write function should read <parameter>count</parameter>
bytes at maximum from the <parameter>buffer</parameter>. Note
that the <parameter>buffer</parameter> doesn't live in the
kernel's memory space, so it should first be copied to kernel
space with <function>copy_from_user</function>. The
<parameter>file</parameter> parameter is usually
ignored. <xref linkend="usingdata"> shows how to use the
<parameter>data</parameter> parameter.
</para>
<para>
Again, <xref linkend="example"> shows how to use this call back
function.
</para>
</sect1>
<sect1 id="usingdata">
<title>A single call back for many files</title>
<para>
When a large number of almost identical files is used, it's
quite inconvenient to use a separate call back function for
each file. A better approach is to have a single call back
function that distinguishes between the files by using the
<structfield>data</structfield> field in <structname>struct
proc_dir_entry</structname>. First of all, the
<structfield>data</structfield> field has to be initialised:
</para>
<programlisting>
struct proc_dir_entry* entry;
struct my_file_data *file_data;
file_data = kmalloc(sizeof(struct my_file_data), GFP_KERNEL);
entry->data = file_data;
</programlisting>
<para>
The <structfield>data</structfield> field is a <type>void
*</type>, so it can be initialised with anything.
</para>
<para>
Now that the <structfield>data</structfield> field is set, the
<function>read_proc</function> and
<function>write_proc</function> can use it to distinguish
between files because they get it passed into their
<parameter>data</parameter> parameter:
</para>
<programlisting>
int foo_read_func(char *page, char **start, off_t off,
int count, int *eof, void *data)
{
int len;
if(data == file_data) {
/* special case for this file */
} else {
/* normal processing */
}
return len;
}
</programlisting>
<para>
Be sure to free the <structfield>data</structfield> data field
when removing the procfs entry.
</para>
</sect1>
</chapter>
<chapter id="tips">
<title>Tips and tricks</title>
<sect1 id="convenience">
<title>Convenience functions</title>
<funcsynopsis>
<funcprototype>
<funcdef>struct proc_dir_entry* <function>create_proc_read_entry</function></funcdef>
<paramdef>const char* <parameter>name</parameter></paramdef>
<paramdef>mode_t <parameter>mode</parameter></paramdef>
<paramdef>struct proc_dir_entry* <parameter>parent</parameter></paramdef>
<paramdef>read_proc_t* <parameter>read_proc</parameter></paramdef>
<paramdef>void* <parameter>data</parameter></paramdef>
</funcprototype>
</funcsynopsis>
<para>
This function creates a regular file in exactly the same way
as <function>create_proc_entry</function> from <xref
linkend="regularfile"> does, but also allows to set the read
function <parameter>read_proc</parameter> in one call. This
function can set the <parameter>data</parameter> as well, like
explained in <xref linkend="usingdata">.
</para>
</sect1>
<sect1>
<title>Modules</title>
<para>
If procfs is being used from within a module, be sure to set
the <structfield>owner</structfield> field in the
<structname>struct proc_dir_entry</structname> to
<constant>THIS_MODULE</constant>.
</para>
<programlisting>
struct proc_dir_entry* entry;
entry->owner = THIS_MODULE;
</programlisting>
</sect1>
<sect1>
<title>Mode and ownership</title>
<para>
Sometimes it is useful to change the mode and/or ownership of
a procfs entry. Here is an example that shows how to achieve
that:
</para>
<programlisting>
struct proc_dir_entry* entry;
entry->mode = S_IWUSR |S_IRUSR | S_IRGRP | S_IROTH;
entry->uid = 0;
entry->gid = 100;
</programlisting>
</sect1>
</chapter>
<chapter id="example">
<title>Example</title>
<!-- be careful with the example code: it shouldn't be wider than
approx. 60 columns, or otherwise it won't fit properly on a page
-->
&procfsexample;
</chapter>
</book>