URL
https://opencores.org/ocsvn/or1k/or1k/trunk
Subversion Repositories or1k
[/] [or1k/] [trunk/] [linux/] [linux-2.4/] [Documentation/] [sound/] [MultiSound] - Rev 1765
Compare with Previous | Blame | View Log
#! /bin/sh## Turtle Beach MultiSound Driver Notes# -- Andrew Veliath <andrewtv@usa.net>## Last update: September 10, 1998# Corresponding msnd driver: 0.8.3## ** This file is a README (top part) and shell archive (bottom part).# The corresponding archived utility sources can be unpacked by# running `sh MultiSound' (the utilities are only needed for the# Pinnacle and Fiji cards). **### -=-=- Getting Firmware -=-=-# ~~~~~~~~~~~~~~~~~~~~~~~~~~~~## See the section `Obtaining and Creating Firmware Files' in this# document for instructions on obtaining the necessary firmware# files.### Supported Features# ~~~~~~~~~~~~~~~~~~## Currently, full-duplex digital audio (/dev/dsp only, /dev/audio is# not currently available) and mixer functionality (/dev/mixer) are# supported (memory mapped digital audio is not yet supported).# Digital transfers and monitoring can be done as well if you have# the digital daughterboard (see the section on using the S/PDIF port# for more information).## Support for the Turtle Beach MultiSound Hurricane architecture is# composed of the following modules (these can also operate compiled# into the kernel):## msnd - MultiSound base (requires soundcore)## msnd_classic - Base audio/mixer support for Classic, Monetery and# Tahiti cards## msnd_pinnacle - Base audio/mixer support for Pinnacle and Fiji cards### Important Notes - Read Before Using# ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~## The firmware files are not included (may change in future). You# must obtain these images from Turtle Beach (they are included in# the MultiSound Development Kits), and place them in /etc/sound for# example, and give the full paths in the Linux configuration. If# you are compiling in support for the MultiSound driver rather than# using it as a module, these firmware files must be accessible# during kernel compilation.## Please note these files must be binary files, not assembler. See# the section later in this document for instructions to obtain these# files.### Configuring Card Resources# ~~~~~~~~~~~~~~~~~~~~~~~~~~## ** This section is very important, as your card may not work at all# or your machine may crash if you do not do this correctly. **## * Classic/Monterey/Tahiti## These cards are configured through the driver msnd_classic. You must# know the io port, then the driver will select the irq and memory resources# on the card. It is up to you to know if these are free locations or now,# a conflict can lock the machine up.## * Pinnacle/Fiji## The Pinnacle and Fiji cards have an extra config port, either# 0x250, 0x260 or 0x270. This port can be disabled to have the card# configured strictly through PnP, however you lose the ability to# access the IDE controller and joystick devices on this card when# using PnP. The included pinnaclecfg program in this shell archive# can be used to configure the card in non-PnP mode, and in PnP mode# you can use isapnptools. These are described briefly here.## pinnaclecfg is not required; you can use the msnd_pinnacle module# to fully configure the card as well. However, pinnaclecfg can be# used to change the resource values of a particular device after the# msnd_pinnacle module has been loaded. If you are compiling the# driver into the kernel, you must set these values during compile# time, however other peripheral resource values can be changed with# the pinnaclecfg program after the kernel is loaded.### *** PnP mode## Use pnpdump to obtain a sample configuration if you can; I was able# to obtain one with the command `pnpdump 1 0x203' -- this may vary# for you (running pnpdump by itself did not work for me). Then,# edit this file and use isapnp to uncomment and set the card values.# Use these values when inserting the msnd_pinnacle module. Using# this method, you can set the resources for the DSP and the Kurzweil# synth (Pinnacle). Since Linux does not directly support PnP# devices, you may have difficulty when using the card in PnP mode# when it the driver is compiled into the kernel. Using non-PnP mode# is preferable in this case.## Here is an example mypinnacle.conf for isapnp that sets the card to# io base 0x210, irq 5 and mem 0xd8000, and also sets the Kurzweil# synth to 0x330 and irq 9 (may need editing for your system):## (READPORT 0x0203)# (CSN 2)# (IDENTIFY *)## # DSP# (CONFIGURE BVJ0440/-1 (LD 0# (INT 0 (IRQ 5 (MODE +E))) (IO 0 (BASE 0x0210)) (MEM 0 (BASE 0x0d8000))# (ACT Y)))## # Kurzweil Synth (Pinnacle Only)# (CONFIGURE BVJ0440/-1 (LD 1# (IO 0 (BASE 0x0330)) (INT 0 (IRQ 9 (MODE +E)))# (ACT Y)))## (WAITFORKEY)### *** Non-PnP mode## The second way is by running the card in non-PnP mode. This# actually has some advantages in that you can access some other# devices on the card, such as the joystick and IDE controller. To# configure the card, unpack this shell archive and build the# pinnaclecfg program. Using this program, you can assign the# resource values to the card's devices, or disable the devices. As# an alternative to using pinnaclecfg, you can specify many of the# configuration values when loading the msnd_pinnacle module (or# during kernel configuration when compiling the driver into the# kernel).## If you specify cfg=0x250 for the msnd_pinnacle module, it# automatically configure the card to the given io, irq and memory# values using that config port (the config port is jumper selectable# on the card to 0x250, 0x260 or 0x270).## See the `msnd_pinnacle Additional Options' section below for more# information on these parameters (also, if you compile the driver# directly into the kernel, these extra parameters can be useful# here).### ** It is very easy to cause problems in your machine if you choose a# resource value which is incorrect. **### Examples# ~~~~~~~~## * MultiSound Classic/Monterey/Tahiti:## modprobe soundcore# insmod msnd# insmod msnd_classic io=0x290 irq=7 mem=0xd0000## * MultiSound Pinnacle in PnP mode:## modprobe soundcore# insmod msnd# isapnp mypinnacle.conf# insmod msnd_pinnacle io=0x210 irq=5 mem=0xd8000 <-- match mypinnacle.conf values## * MultiSound Pinnacle in non-PnP mode (replace 0x250 with your configuration port,# one of 0x250, 0x260 or 0x270):## insmod soundcore# insmod msnd# insmod msnd_pinnacle cfg=0x250 io=0x290 irq=5 mem=0xd0000## * To use the MPU-compatible Kurzweil synth on the Pinnacle in PnP# mode, add the following (assumes you did `isapnp mypinnacle.conf'):## insmod sound# insmod mpu401 io=0x330 irq=9 <-- match mypinnacle.conf values## * To use the MPU-compatible Kurzweil synth on the Pinnacle in non-PnP# mode, add the following. Note how we first configure the peripheral's# resources, _then_ install a Linux driver for it:## insmod sound# pinnaclecfg 0x250 mpu 0x330 9# insmod mpu401 io=0x330 irq=9## -- OR you can use the following sequence without pinnaclecfg in non-PnP mode:## insmod soundcore# insmod msnd# insmod msnd_pinnacle cfg=0x250 io=0x290 irq=5 mem=0xd0000 mpu_io=0x330 mpu_irq=9# insmod sound# insmod mpu401 io=0x330 irq=9## * To setup the joystick port on the Pinnacle in non-PnP mode (though# you have to find the actual Linux joystick driver elsewhere), you# can use pinnaclecfg:## pinnaclecfg 0x250 joystick 0x200## -- OR you can configure this using msnd_pinnacle with the following:## insmod soundcore# insmod msnd# insmod msnd_pinnacle cfg=0x250 io=0x290 irq=5 mem=0xd0000 joystick_io=0x200### msnd_classic, msnd_pinnacle Required Options# ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~## If the following options are not given, the module will not load.# Examine the kernel message log for informative error messages.# WARNING--probing isn't supported so try to make sure you have the# correct shared memory area, otherwise you may experience problems.## io I/O base of DSP, e.g. io=0x210# irq IRQ number, e.g. irq=5# mem Shared memory area, e.g. mem=0xd8000### msnd_classic, msnd_pinnacle Additional Options# ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~## fifosize The digital audio FIFOs, in kilobytes. If not# specified, the default will be used. Increasing# this value will reduce the chance of a FIFO# underflow at the expense of increasing overall# latency. For example, fifosize=512 will# allocate 512kB read and write FIFOs (1MB total).# While this may reduce dropouts, a heavy machine# load will undoubtedly starve the FIFO of data# and you will eventually get dropouts. One# option is to alter the scheduling priority of# the playback process, using `nice' or some form# of POSIX soft real-time scheduling.## calibrate_signal Setting this to one calibrates the ADCs to the# signal, zero calibrates to the card (defaults# to zero).### msnd_pinnacle Additional Options# ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~## digital Specify digital=1 to enable the S/PDIF input# if you have the digital daughterboard# adapter. This will enable access to the# DIGITAL1 input for the soundcard in the mixer.# Some mixer programs might have trouble setting# the DIGITAL1 source as an input. If you have# trouble, you can try the setdigital.c program# at the bottom of this document.## cfg Non-PnP configuration port for the Pinnacle# and Fiji (typically 0x250, 0x260 or 0x270,# depending on the jumper configuration). If# this option is omitted, then it is assumed# that the card is in PnP mode, and that the# specified DSP resource values are already# configured with PnP (i.e. it won't attempt to# do any sort of configuration).## When the Pinnacle is in non-PnP mode, you can use the following# options to configure particular devices. If a full specification# for a device is not given, then the device is not configured. Note# that you still must use a Linux driver for any of these devices# once their resources are setup (such as the Linux joystick driver,# or the MPU401 driver from OSS for the Kurzweil synth).## mpu_io I/O port of MPU (on-board Kurzweil synth)# mpu_irq IRQ of MPU (on-board Kurzweil synth)# ide_io0 First I/O port of IDE controller# ide_io1 Second I/O port of IDE controller# ide_irq IRQ IDE controller# joystick_io I/O port of joystick### Obtaining and Creating Firmware Files# ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~## For the Classic/Tahiti/Monterey# ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~## Download to /tmp and unzip the following file from Turtle Beach:## ftp://ftp.voyetra.com/pub/tbs/msndcl/msndvkit.zip## When unzipped, unzip the file named MsndFiles.zip. Then copy the# following firmware files to /etc/sound (note the file renaming):## cp DSPCODE/MSNDINIT.BIN /etc/sound/msndinit.bin# cp DSPCODE/MSNDPERM.REB /etc/sound/msndperm.bin## When configuring the Linux kernel, specify /etc/sound/msndinit.bin and# /etc/sound/msndperm.bin for the two firmware files (Linux kernel# versions older than 2.2 do not ask for firmware paths, and are# hardcoded to /etc/sound).## If you are compiling the driver into the kernel, these files must# be accessible during compilation, but will not be needed later.# The files must remain, however, if the driver is used as a module.### For the Pinnacle/Fiji# ~~~~~~~~~~~~~~~~~~~~~## Download to /tmp and unzip the following file from Turtle Beach (be# sure to use the entire URL; some have had trouble navigating to the# URL):## ftp://ftp.voyetra.com/pub/tbs/pinn/pnddk100.zip## Unpack this shell archive, and run make in the created directory# (you need a C compiler and flex to build the utilities). This# should give you the executables conv, pinnaclecfg and setdigital.# conv is only used temporarily here to create the firmware files,# while pinnaclecfg is used to configure the Pinnacle or Fiji card in# non-PnP mode, and setdigital can be used to set the S/PDIF input on# the mixer (pinnaclecfg and setdigital should be copied to a# convenient place, possibly run during system initialization).## To generating the firmware files with the `conv' program, we create# the binary firmware files by doing the following conversion# (assuming the archive unpacked into a directory named PINNDDK):## ./conv < PINNDDK/dspcode/pndspini.asm > /etc/sound/pndspini.bin# ./conv < PINNDDK/dspcode/pndsperm.asm > /etc/sound/pndsperm.bin## The conv (and conv.l) program is not needed after conversion and can# be safely deleted. Then, when configuring the Linux kernel, specify# /etc/sound/pndspini.bin and /etc/sound/pndsperm.bin for the two# firmware files (Linux kernel versions older than 2.2 do not ask for# firmware paths, and are hardcoded to /etc/sound).## If you are compiling the driver into the kernel, these files must# be accessible during compilation, but will not be needed later.# The files must remain, however, if the driver is used as a module.### Using Digital I/O with the S/PDIF Port# ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~## If you have a Pinnacle or Fiji with the digital daughterboard and# want to set it as the input source, you can use this program if you# have trouble trying to do it with a mixer program (be sure to# insert the module with the digital=1 option, or say Y to the option# during compiled-in kernel operation). Upon selection of the S/PDIF# port, you should be able monitor and record from it.## There is something to note about using the S/PDIF port. Digital# timing is taken from the digital signal, so if a signal is not# connected to the port and it is selected as recording input, you# will find PCM playback to be distorted in playback rate. Also,# attempting to record at a sampling rate other than the DAT rate may# be problematic (i.e. trying to record at 8000Hz when the DAT signal# is 44100Hz). If you have a problem with this, set the recording# input to analog if you need to record at a rate other than that of# the DAT rate.### -- Shell archive attached below, just run `sh MultiSound' to extract.# Contains Pinnacle/Fiji utilities to convert firmware, configure# in non-PnP mode, and select the DIGITAL1 input for the mixer.###!/bin/sh# This is a shell archive (produced by GNU sharutils 4.2).# To extract the files from this archive, save it to some FILE, remove# everything before the `!/bin/sh' line above, then type `sh FILE'.## Made on 1998-12-04 10:07 EST by <andrewtv@ztransform.velsoft.com>.# Source directory was `/home/andrewtv/programming/pinnacle/pinnacle'.## Existing files will *not* be overwritten unless `-c' is specified.## This shar contains:# length mode name# ------ ---------- ------------------------------------------# 2046 -rw-rw-r-- MultiSound.d/setdigital.c# 10235 -rw-rw-r-- MultiSound.d/pinnaclecfg.c# 106 -rw-rw-r-- MultiSound.d/Makefile# 141 -rw-rw-r-- MultiSound.d/conv.l# 1472 -rw-rw-r-- MultiSound.d/msndreset.c#save_IFS="${IFS}"IFS="${IFS}:"gettext_dir=FAILEDlocale_dir=FAILEDfirst_param="$1"for dir in $PATHdoif test "$gettext_dir" = FAILED && test -f $dir/gettext \&& ($dir/gettext --version >/dev/null 2>&1)thenset `$dir/gettext --version 2>&1`if test "$3" = GNUthengettext_dir=$dirfifiif test "$locale_dir" = FAILED && test -f $dir/shar \&& ($dir/shar --print-text-domain-dir >/dev/null 2>&1)thenlocale_dir=`$dir/shar --print-text-domain-dir`fidoneIFS="$save_IFS"if test "$locale_dir" = FAILED || test "$gettext_dir" = FAILEDthenecho=echoelseTEXTDOMAINDIR=$locale_direxport TEXTDOMAINDIRTEXTDOMAIN=sharutilsexport TEXTDOMAINecho="$gettext_dir/gettext -s"fitouch -am 1231235999 $$.touch >/dev/null 2>&1if test ! -f 1231235999 && test -f $$.touch; thenshar_touch=touchelseshar_touch=:echo$echo 'WARNING: not restoring timestamps. Consider getting and'$echo "installing GNU \`touch', distributed in GNU File Utilities..."echofirm -f 1231235999 $$.touch#if mkdir _sh01426; then$echo 'x -' 'creating lock directory'else$echo 'failed to create lock directory'exit 1fi# ============= MultiSound.d/setdigital.c ==============if test ! -d 'MultiSound.d'; then$echo 'x -' 'creating directory' 'MultiSound.d'mkdir 'MultiSound.d'fiif test -f 'MultiSound.d/setdigital.c' && test "$first_param" != -c; then$echo 'x -' SKIPPING 'MultiSound.d/setdigital.c' '(file already exists)'else$echo 'x -' extracting 'MultiSound.d/setdigital.c' '(text)'sed 's/^X//' << 'SHAR_EOF' > 'MultiSound.d/setdigital.c' &&/*********************************************************************X *X * setdigital.c - sets the DIGITAL1 input for a mixerX *X * Copyright (C) 1998 Andrew VeliathX *X * This program is free software; you can redistribute it and/or modifyX * it under the terms of the GNU General Public License as published byX * the Free Software Foundation; either version 2 of the License, orX * (at your option) any later version.X *X * This program is distributed in the hope that it will be useful,X * but WITHOUT ANY WARRANTY; without even the implied warranty ofX * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See theX * GNU General Public License for more details.X *X * You should have received a copy of the GNU General Public LicenseX * along with this program; if not, write to the Free SoftwareX * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.X *X ********************************************************************/X#include <stdio.h>#include <unistd.h>#include <fcntl.h>#include <sys/types.h>#include <sys/stat.h>#include <sys/ioctl.h>#include <sys/soundcard.h>Xint main(int argc, char *argv[]){X int fd;X unsigned long recmask, recsrc;XX if (argc != 2) {X fprintf(stderr, "usage: setdigital <mixer device>\n");X exit(1);X }XX if ((fd = open(argv[1], O_RDWR)) < 0) {X perror(argv[1]);X exit(1);X }XX if (ioctl(fd, SOUND_MIXER_READ_RECMASK, &recmask) < 0) {X fprintf(stderr, "error: ioctl read recording mask failed\n");X perror("ioctl");X close(fd);X exit(1);X }XX if (!(recmask & SOUND_MASK_DIGITAL1)) {X fprintf(stderr, "error: cannot find DIGITAL1 device in mixer\n");X close(fd);X exit(1);X }XX if (ioctl(fd, SOUND_MIXER_READ_RECSRC, &recsrc) < 0) {X fprintf(stderr, "error: ioctl read recording source failed\n");X perror("ioctl");X close(fd);X exit(1);X }XX recsrc |= SOUND_MASK_DIGITAL1;XX if (ioctl(fd, SOUND_MIXER_WRITE_RECSRC, &recsrc) < 0) {X fprintf(stderr, "error: ioctl write recording source failed\n");X perror("ioctl");X close(fd);X exit(1);X }XX close(fd);XX return 0;}SHAR_EOF$shar_touch -am 1204092598 'MultiSound.d/setdigital.c' &&chmod 0664 'MultiSound.d/setdigital.c' ||$echo 'restore of' 'MultiSound.d/setdigital.c' 'failed'if ( md5sum --help 2>&1 | grep 'sage: md5sum \[' ) >/dev/null 2>&1 \&& ( md5sum --version 2>&1 | grep -v 'textutils 1.12' ) >/dev/null; thenmd5sum -c << SHAR_EOF >/dev/null 2>&1 \|| $echo 'MultiSound.d/setdigital.c:' 'MD5 check failed'e87217fc3e71288102ba41fd81f71ec4 MultiSound.d/setdigital.cSHAR_EOFelseshar_count="`LC_ALL= LC_CTYPE= LANG= wc -c < 'MultiSound.d/setdigital.c'`"test 2046 -eq "$shar_count" ||$echo 'MultiSound.d/setdigital.c:' 'original size' '2046,' 'current size' "$shar_count!"fifi# ============= MultiSound.d/pinnaclecfg.c ==============if test -f 'MultiSound.d/pinnaclecfg.c' && test "$first_param" != -c; then$echo 'x -' SKIPPING 'MultiSound.d/pinnaclecfg.c' '(file already exists)'else$echo 'x -' extracting 'MultiSound.d/pinnaclecfg.c' '(text)'sed 's/^X//' << 'SHAR_EOF' > 'MultiSound.d/pinnaclecfg.c' &&/*********************************************************************X *X * pinnaclecfg.c - Pinnacle/Fiji Device Configuration ProgramX *X * This is for NON-PnP mode only. For PnP mode, use isapnptools.X *X * This is Linux-specific, and must be run with root permissions.X *X * Part of the Turtle Beach MultiSound Sound Card Driver for LinuxX *X * Copyright (C) 1998 Andrew VeliathX *X * This program is free software; you can redistribute it and/or modifyX * it under the terms of the GNU General Public License as published byX * the Free Software Foundation; either version 2 of the License, orX * (at your option) any later version.X *X * This program is distributed in the hope that it will be useful,X * but WITHOUT ANY WARRANTY; without even the implied warranty ofX * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See theX * GNU General Public License for more details.X *X * You should have received a copy of the GNU General Public LicenseX * along with this program; if not, write to the Free SoftwareX * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.X *X ********************************************************************/X#include <stdio.h>#include <stdlib.h>#include <string.h>#include <errno.h>#include <unistd.h>#include <asm/io.h>#include <asm/types.h>X#define IREG_LOGDEVICE 0x07#define IREG_ACTIVATE 0x30#define LD_ACTIVATE 0x01#define LD_DISACTIVATE 0x00#define IREG_EECONTROL 0x3F#define IREG_MEMBASEHI 0x40#define IREG_MEMBASELO 0x41#define IREG_MEMCONTROL 0x42#define IREG_MEMRANGEHI 0x43#define IREG_MEMRANGELO 0x44#define MEMTYPE_8BIT 0x00#define MEMTYPE_16BIT 0x02#define MEMTYPE_RANGE 0x00#define MEMTYPE_HIADDR 0x01#define IREG_IO0_BASEHI 0x60#define IREG_IO0_BASELO 0x61#define IREG_IO1_BASEHI 0x62#define IREG_IO1_BASELO 0x63#define IREG_IRQ_NUMBER 0x70#define IREG_IRQ_TYPE 0x71#define IRQTYPE_HIGH 0x02#define IRQTYPE_LOW 0x00#define IRQTYPE_LEVEL 0x01#define IRQTYPE_EDGE 0x00X#define HIBYTE(w) ((BYTE)(((WORD)(w) >> 8) & 0xFF))#define LOBYTE(w) ((BYTE)(w))#define MAKEWORD(low,hi) ((WORD)(((BYTE)(low))|(((WORD)((BYTE)(hi)))<<8)))Xtypedef __u8 BYTE;typedef __u16 USHORT;typedef __u16 WORD;Xstatic int config_port = -1;Xstatic int msnd_write_cfg(int cfg, int reg, int value){X outb(reg, cfg);X outb(value, cfg + 1);X if (value != inb(cfg + 1)) {X fprintf(stderr, "error: msnd_write_cfg: I/O error\n");X return -EIO;X }X return 0;}Xstatic int msnd_read_cfg(int cfg, int reg){X outb(reg, cfg);X return inb(cfg + 1);}Xstatic int msnd_write_cfg_io0(int cfg, int num, WORD io){X if (msnd_write_cfg(cfg, IREG_LOGDEVICE, num))X return -EIO;X if (msnd_write_cfg(cfg, IREG_IO0_BASEHI, HIBYTE(io)))X return -EIO;X if (msnd_write_cfg(cfg, IREG_IO0_BASELO, LOBYTE(io)))X return -EIO;X return 0;}Xstatic int msnd_read_cfg_io0(int cfg, int num, WORD *io){X if (msnd_write_cfg(cfg, IREG_LOGDEVICE, num))X return -EIO;XX *io = MAKEWORD(msnd_read_cfg(cfg, IREG_IO0_BASELO),X msnd_read_cfg(cfg, IREG_IO0_BASEHI));XX return 0;}Xstatic int msnd_write_cfg_io1(int cfg, int num, WORD io){X if (msnd_write_cfg(cfg, IREG_LOGDEVICE, num))X return -EIO;X if (msnd_write_cfg(cfg, IREG_IO1_BASEHI, HIBYTE(io)))X return -EIO;X if (msnd_write_cfg(cfg, IREG_IO1_BASELO, LOBYTE(io)))X return -EIO;X return 0;}Xstatic int msnd_read_cfg_io1(int cfg, int num, WORD *io){X if (msnd_write_cfg(cfg, IREG_LOGDEVICE, num))X return -EIO;XX *io = MAKEWORD(msnd_read_cfg(cfg, IREG_IO1_BASELO),X msnd_read_cfg(cfg, IREG_IO1_BASEHI));XX return 0;}Xstatic int msnd_write_cfg_irq(int cfg, int num, WORD irq){X if (msnd_write_cfg(cfg, IREG_LOGDEVICE, num))X return -EIO;X if (msnd_write_cfg(cfg, IREG_IRQ_NUMBER, LOBYTE(irq)))X return -EIO;X if (msnd_write_cfg(cfg, IREG_IRQ_TYPE, IRQTYPE_EDGE))X return -EIO;X return 0;}Xstatic int msnd_read_cfg_irq(int cfg, int num, WORD *irq){X if (msnd_write_cfg(cfg, IREG_LOGDEVICE, num))X return -EIO;XX *irq = msnd_read_cfg(cfg, IREG_IRQ_NUMBER);XX return 0;}Xstatic int msnd_write_cfg_mem(int cfg, int num, int mem){X WORD wmem;XX mem >>= 8;X mem &= 0xfff;X wmem = (WORD)mem;X if (msnd_write_cfg(cfg, IREG_LOGDEVICE, num))X return -EIO;X if (msnd_write_cfg(cfg, IREG_MEMBASEHI, HIBYTE(wmem)))X return -EIO;X if (msnd_write_cfg(cfg, IREG_MEMBASELO, LOBYTE(wmem)))X return -EIO;X if (wmem && msnd_write_cfg(cfg, IREG_MEMCONTROL, (MEMTYPE_HIADDR | MEMTYPE_16BIT)))X return -EIO;X return 0;}Xstatic int msnd_read_cfg_mem(int cfg, int num, int *mem){X if (msnd_write_cfg(cfg, IREG_LOGDEVICE, num))X return -EIO;XX *mem = MAKEWORD(msnd_read_cfg(cfg, IREG_MEMBASELO),X msnd_read_cfg(cfg, IREG_MEMBASEHI));X *mem <<= 8;XX return 0;}Xstatic int msnd_activate_logical(int cfg, int num){X if (msnd_write_cfg(cfg, IREG_LOGDEVICE, num))X return -EIO;X if (msnd_write_cfg(cfg, IREG_ACTIVATE, LD_ACTIVATE))X return -EIO;X return 0;}Xstatic int msnd_write_cfg_logical(int cfg, int num, WORD io0, WORD io1, WORD irq, int mem){X if (msnd_write_cfg(cfg, IREG_LOGDEVICE, num))X return -EIO;X if (msnd_write_cfg_io0(cfg, num, io0))X return -EIO;X if (msnd_write_cfg_io1(cfg, num, io1))X return -EIO;X if (msnd_write_cfg_irq(cfg, num, irq))X return -EIO;X if (msnd_write_cfg_mem(cfg, num, mem))X return -EIO;X if (msnd_activate_logical(cfg, num))X return -EIO;X return 0;}Xstatic int msnd_read_cfg_logical(int cfg, int num, WORD *io0, WORD *io1, WORD *irq, int *mem){X if (msnd_write_cfg(cfg, IREG_LOGDEVICE, num))X return -EIO;X if (msnd_read_cfg_io0(cfg, num, io0))X return -EIO;X if (msnd_read_cfg_io1(cfg, num, io1))X return -EIO;X if (msnd_read_cfg_irq(cfg, num, irq))X return -EIO;X if (msnd_read_cfg_mem(cfg, num, mem))X return -EIO;X return 0;}Xstatic void usage(void){X fprintf(stderr,X "\n"X "pinnaclecfg 1.0\n"X "\n"X "usage: pinnaclecfg <config port> [device config]\n"X "\n"X "This is for use with the card in NON-PnP mode only.\n"X "\n"X "Available devices (not all available for Fiji):\n"X "\n"X " Device Description\n"X " -------------------------------------------------------------------\n"X " reset Reset all devices (i.e. disable)\n"X " show Display current device configurations\n"X "\n"X " dsp <io> <irq> <mem> Audio device\n"X " mpu <io> <irq> Internal Kurzweil synth\n"X " ide <io0> <io1> <irq> On-board IDE controller\n"X " joystick <io> Joystick port\n"X "\n");X exit(1);}Xstatic int cfg_reset(void){X int i;XX for (i = 0; i < 4; ++i)X msnd_write_cfg_logical(config_port, i, 0, 0, 0, 0);XX return 0;}Xstatic int cfg_show(void){X int i;X int count = 0;XX for (i = 0; i < 4; ++i) {X WORD io0, io1, irq;X int mem;X msnd_read_cfg_logical(config_port, i, &io0, &io1, &irq, &mem);X switch (i) {X case 0:X if (io0 || irq || mem) {X printf("dsp 0x%x %d 0x%x\n", io0, irq, mem);X ++count;X }X break;X case 1:X if (io0 || irq) {X printf("mpu 0x%x %d\n", io0, irq);X ++count;X }X break;X case 2:X if (io0 || io1 || irq) {X printf("ide 0x%x 0x%x %d\n", io0, io1, irq);X ++count;X }X break;X case 3:X if (io0) {X printf("joystick 0x%x\n", io0);X ++count;X }X break;X }X }XX if (count == 0)X fprintf(stderr, "no devices configured\n");XX return 0;}Xstatic int cfg_dsp(int argc, char *argv[]){X int io, irq, mem;XX if (argc < 3 ||X sscanf(argv[0], "0x%x", &io) != 1 ||X sscanf(argv[1], "%d", &irq) != 1 ||X sscanf(argv[2], "0x%x", &mem) != 1)X usage();XX if (!(io == 0x290 ||X io == 0x260 ||X io == 0x250 ||X io == 0x240 ||X io == 0x230 ||X io == 0x220 ||X io == 0x210 ||X io == 0x3e0)) {X fprintf(stderr, "error: io must be one of "X "210, 220, 230, 240, 250, 260, 290, or 3E0\n");X usage();X }XX if (!(irq == 5 ||X irq == 7 ||X irq == 9 ||X irq == 10 ||X irq == 11 ||X irq == 12)) {X fprintf(stderr, "error: irq must be one of "X "5, 7, 9, 10, 11 or 12\n");X usage();X }XX if (!(mem == 0xb0000 ||X mem == 0xc8000 ||X mem == 0xd0000 ||X mem == 0xd8000 ||X mem == 0xe0000 ||X mem == 0xe8000)) {X fprintf(stderr, "error: mem must be one of "X "0xb0000, 0xc8000, 0xd0000, 0xd8000, 0xe0000 or 0xe8000\n");X usage();X }XX return msnd_write_cfg_logical(config_port, 0, io, 0, irq, mem);}Xstatic int cfg_mpu(int argc, char *argv[]){X int io, irq;XX if (argc < 2 ||X sscanf(argv[0], "0x%x", &io) != 1 ||X sscanf(argv[1], "%d", &irq) != 1)X usage();XX return msnd_write_cfg_logical(config_port, 1, io, 0, irq, 0);}Xstatic int cfg_ide(int argc, char *argv[]){X int io0, io1, irq;XX if (argc < 3 ||X sscanf(argv[0], "0x%x", &io0) != 1 ||X sscanf(argv[0], "0x%x", &io1) != 1 ||X sscanf(argv[1], "%d", &irq) != 1)X usage();XX return msnd_write_cfg_logical(config_port, 2, io0, io1, irq, 0);}Xstatic int cfg_joystick(int argc, char *argv[]){X int io;XX if (argc < 1 ||X sscanf(argv[0], "0x%x", &io) != 1)X usage();XX return msnd_write_cfg_logical(config_port, 3, io, 0, 0, 0);}Xint main(int argc, char *argv[]){X char *device;X int rv = 0;XX --argc; ++argv;XX if (argc < 2)X usage();XX sscanf(argv[0], "0x%x", &config_port);X if (config_port != 0x250 && config_port != 0x260 && config_port != 0x270) {X fprintf(stderr, "error: <config port> must be 0x250, 0x260 or 0x270\n");X exit(1);X }X if (ioperm(config_port, 2, 1)) {X perror("ioperm");X fprintf(stderr, "note: pinnaclecfg must be run as root\n");X exit(1);X }X device = argv[1];XX argc -= 2; argv += 2;XX if (strcmp(device, "reset") == 0)X rv = cfg_reset();X else if (strcmp(device, "show") == 0)X rv = cfg_show();X else if (strcmp(device, "dsp") == 0)X rv = cfg_dsp(argc, argv);X else if (strcmp(device, "mpu") == 0)X rv = cfg_mpu(argc, argv);X else if (strcmp(device, "ide") == 0)X rv = cfg_ide(argc, argv);X else if (strcmp(device, "joystick") == 0)X rv = cfg_joystick(argc, argv);X else {X fprintf(stderr, "error: unknown device %s\n", device);X usage();X }XX if (rv)X fprintf(stderr, "error: device configuration failed\n");XX return 0;}SHAR_EOF$shar_touch -am 1204092598 'MultiSound.d/pinnaclecfg.c' &&chmod 0664 'MultiSound.d/pinnaclecfg.c' ||$echo 'restore of' 'MultiSound.d/pinnaclecfg.c' 'failed'if ( md5sum --help 2>&1 | grep 'sage: md5sum \[' ) >/dev/null 2>&1 \&& ( md5sum --version 2>&1 | grep -v 'textutils 1.12' ) >/dev/null; thenmd5sum -c << SHAR_EOF >/dev/null 2>&1 \|| $echo 'MultiSound.d/pinnaclecfg.c:' 'MD5 check failed'366bdf27f0db767a3c7921d0a6db20fe MultiSound.d/pinnaclecfg.cSHAR_EOFelseshar_count="`LC_ALL= LC_CTYPE= LANG= wc -c < 'MultiSound.d/pinnaclecfg.c'`"test 10235 -eq "$shar_count" ||$echo 'MultiSound.d/pinnaclecfg.c:' 'original size' '10235,' 'current size' "$shar_count!"fifi# ============= MultiSound.d/Makefile ==============if test -f 'MultiSound.d/Makefile' && test "$first_param" != -c; then$echo 'x -' SKIPPING 'MultiSound.d/Makefile' '(file already exists)'else$echo 'x -' extracting 'MultiSound.d/Makefile' '(text)'sed 's/^X//' << 'SHAR_EOF' > 'MultiSound.d/Makefile' &&CC = gccCFLAGS = -OPROGS = setdigital msndreset pinnaclecfg convXall: $(PROGS)Xclean:X rm -f $(PROGS)SHAR_EOF$shar_touch -am 1204092398 'MultiSound.d/Makefile' &&chmod 0664 'MultiSound.d/Makefile' ||$echo 'restore of' 'MultiSound.d/Makefile' 'failed'if ( md5sum --help 2>&1 | grep 'sage: md5sum \[' ) >/dev/null 2>&1 \&& ( md5sum --version 2>&1 | grep -v 'textutils 1.12' ) >/dev/null; thenmd5sum -c << SHAR_EOF >/dev/null 2>&1 \|| $echo 'MultiSound.d/Makefile:' 'MD5 check failed'76ca8bb44e3882edcf79c97df6c81845 MultiSound.d/MakefileSHAR_EOFelseshar_count="`LC_ALL= LC_CTYPE= LANG= wc -c < 'MultiSound.d/Makefile'`"test 106 -eq "$shar_count" ||$echo 'MultiSound.d/Makefile:' 'original size' '106,' 'current size' "$shar_count!"fifi# ============= MultiSound.d/conv.l ==============if test -f 'MultiSound.d/conv.l' && test "$first_param" != -c; then$echo 'x -' SKIPPING 'MultiSound.d/conv.l' '(file already exists)'else$echo 'x -' extracting 'MultiSound.d/conv.l' '(text)'sed 's/^X//' << 'SHAR_EOF' > 'MultiSound.d/conv.l' &&%%[ \n\t,\r]\;.*DB[0-9A-Fa-f]+H { int n; sscanf(yytext, "%xH", &n); printf("%c", n); }%%int yywrap() { return 1; }main() { yylex(); }SHAR_EOF$shar_touch -am 0828231798 'MultiSound.d/conv.l' &&chmod 0664 'MultiSound.d/conv.l' ||$echo 'restore of' 'MultiSound.d/conv.l' 'failed'if ( md5sum --help 2>&1 | grep 'sage: md5sum \[' ) >/dev/null 2>&1 \&& ( md5sum --version 2>&1 | grep -v 'textutils 1.12' ) >/dev/null; thenmd5sum -c << SHAR_EOF >/dev/null 2>&1 \|| $echo 'MultiSound.d/conv.l:' 'MD5 check failed'd2411fc32cd71a00dcdc1f009e858dd2 MultiSound.d/conv.lSHAR_EOFelseshar_count="`LC_ALL= LC_CTYPE= LANG= wc -c < 'MultiSound.d/conv.l'`"test 141 -eq "$shar_count" ||$echo 'MultiSound.d/conv.l:' 'original size' '141,' 'current size' "$shar_count!"fifi# ============= MultiSound.d/msndreset.c ==============if test -f 'MultiSound.d/msndreset.c' && test "$first_param" != -c; then$echo 'x -' SKIPPING 'MultiSound.d/msndreset.c' '(file already exists)'else$echo 'x -' extracting 'MultiSound.d/msndreset.c' '(text)'sed 's/^X//' << 'SHAR_EOF' > 'MultiSound.d/msndreset.c' &&/*********************************************************************X *X * msndreset.c - resets the MultiSound cardX *X * Copyright (C) 1998 Andrew VeliathX *X * This program is free software; you can redistribute it and/or modifyX * it under the terms of the GNU General Public License as published byX * the Free Software Foundation; either version 2 of the License, orX * (at your option) any later version.X *X * This program is distributed in the hope that it will be useful,X * but WITHOUT ANY WARRANTY; without even the implied warranty ofX * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See theX * GNU General Public License for more details.X *X * You should have received a copy of the GNU General Public LicenseX * along with this program; if not, write to the Free SoftwareX * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.X *X ********************************************************************/X#include <stdio.h>#include <unistd.h>#include <fcntl.h>#include <sys/types.h>#include <sys/stat.h>#include <sys/ioctl.h>#include <sys/soundcard.h>Xint main(int argc, char *argv[]){X int fd;XX if (argc != 2) {X fprintf(stderr, "usage: msndreset <mixer device>\n");X exit(1);X }XX if ((fd = open(argv[1], O_RDWR)) < 0) {X perror(argv[1]);X exit(1);X }XX if (ioctl(fd, SOUND_MIXER_PRIVATE1, 0) < 0) {X fprintf(stderr, "error: msnd ioctl reset failed\n");X perror("ioctl");X close(fd);X exit(1);X }XX close(fd);XX return 0;}SHAR_EOF$shar_touch -am 1204100698 'MultiSound.d/msndreset.c' &&chmod 0664 'MultiSound.d/msndreset.c' ||$echo 'restore of' 'MultiSound.d/msndreset.c' 'failed'if ( md5sum --help 2>&1 | grep 'sage: md5sum \[' ) >/dev/null 2>&1 \&& ( md5sum --version 2>&1 | grep -v 'textutils 1.12' ) >/dev/null; thenmd5sum -c << SHAR_EOF >/dev/null 2>&1 \|| $echo 'MultiSound.d/msndreset.c:' 'MD5 check failed'c52f876521084e8eb25e12e01dcccb8a MultiSound.d/msndreset.cSHAR_EOFelseshar_count="`LC_ALL= LC_CTYPE= LANG= wc -c < 'MultiSound.d/msndreset.c'`"test 1472 -eq "$shar_count" ||$echo 'MultiSound.d/msndreset.c:' 'original size' '1472,' 'current size' "$shar_count!"fifirm -fr _sh01426exit 0