Subversion Repositories or1k

/*
 * This table is used by some tools to extract hardware parameters.
 * The table should be included in the kernel and the decompressor.
 * Don't forget to update the tools if you change this table.
 *
 * Copyright (C) 2001, 2002, 2003 Axis Communications AB
 *
 * Authors:  Mikael Starvik (starvik@axis.com)
 */

#define PA_SET_VALUE ((CONFIG_ETRAX_DEF_R_PORT_PA_DIR << 8) | \
                (CONFIG_ETRAX_DEF_R_PORT_PA_DATA))
#define PB_SET_VALUE ((CONFIG_ETRAX_DEF_R_PORT_PB_CONFIG << 16) | \
                (CONFIG_ETRAX_DEF_R_PORT_PB_DIR << 8) | \
                (CONFIG_ETRAX_DEF_R_PORT_PB_DATA))

        .ascii "HW_PARAM_MAGIC" ; Magic number
        .dword 0xc0004000       ; Where to load the kernel image (physical!)

        ; Debug port
#ifdef CONFIG_ETRAX_DEBUG_PORT0
        .dword 0
#elif defined(CONFIG_ETRAX_DEBUG_PORT1)
        .dword 1
#elif defined(CONFIG_ETRAX_DEBUG_PORT2)
        .dword 2
#elif defined(CONFIG_ETRAX_DEBUG_PORT3)
        .dword 3
#else
        .dword 4 ; No debug
#endif

        ; SDRAM or EDO DRAM?
#ifdef CONFIG_ETRAX_SDRAM
        .dword 1
#else
        .dword 0
#endif

        ; Register values
        .dword R_WAITSTATES
        .dword CONFIG_ETRAX_DEF_R_WAITSTATES
        .dword R_BUS_CONFIG
        .dword CONFIG_ETRAX_DEF_R_BUS_CONFIG
#ifdef CONFIG_ETRAX_SDRAM
        .dword R_SDRAM_CONFIG
        .dword CONFIG_ETRAX_DEF_R_SDRAM_CONFIG
        .dword R_SDRAM_TIMING
        .dword CONFIG_ETRAX_DEF_R_SDRAM_TIMING
#else
        .dword R_DRAM_CONFIG
        .dword CONFIG_ETRAX_DEF_R_DRAM_CONFIG
        .dword R_DRAM_TIMING
        .dword CONFIG_ETRAX_DEF_R_DRAM_TIMING
#endif
        .dword R_PORT_PA_SET
        .dword PA_SET_VALUE
        .dword R_PORT_PB_SET
        .dword PB_SET_VALUE
        .dword 0 ; No more register values