URL
https://opencores.org/ocsvn/or1k/or1k/trunk
Subversion Repositories or1k
[/] [or1k/] [trunk/] [linux/] [linux-2.4/] [arch/] [ia64/] [kernel/] [setup.c] - Rev 1275
Go to most recent revision | Compare with Previous | Blame | View Log
/* * Architecture-specific setup. * * Copyright (C) 1998-2001 Hewlett-Packard Co * David Mosberger-Tang <davidm@hpl.hp.com> * Stephane Eranian <eranian@hpl.hp.com> * Copyright (C) 2000, Rohit Seth <rohit.seth@intel.com> * Copyright (C) 1999 VA Linux Systems * Copyright (C) 1999 Walt Drummond <drummond@valinux.com> * * 11/12/01 D.Mosberger Convert get_cpuinfo() to seq_file based show_cpuinfo(). * 04/04/00 D.Mosberger renamed cpu_initialized to cpu_online_map * 03/31/00 R.Seth cpu_initialized and current->processor fixes * 02/04/00 D.Mosberger some more get_cpuinfo fixes... * 02/01/00 R.Seth fixed get_cpuinfo for SMP * 01/07/99 S.Eranian added the support for command line argument * 06/24/99 W.Drummond added boot_cpu_data. */ #include <linux/config.h> #include <linux/init.h> #include <linux/acpi.h> #include <linux/bootmem.h> #include <linux/delay.h> #include <linux/kernel.h> #include <linux/reboot.h> #include <linux/sched.h> #include <linux/seq_file.h> #include <linux/string.h> #include <linux/threads.h> #include <linux/console.h> #include <linux/ioport.h> #include <linux/efi.h> #ifdef CONFIG_BLK_DEV_RAM # include <linux/blk.h> #endif #include <asm/ia32.h> #include <asm/page.h> #include <asm/machvec.h> #include <asm/processor.h> #include <asm/sal.h> #include <asm/system.h> #include <asm/mca.h> #include <asm/pgtable.h> #include <asm/pgalloc.h> #include <asm/smp.h> #include <asm/tlb.h> #ifdef CONFIG_BLK_DEV_RAM # include <linux/blk.h> #endif #if defined(CONFIG_SMP) && (IA64_CPU_SIZE > PAGE_SIZE) # error "struct cpuinfo_ia64 too big!" #endif #define MIN(a,b) ((a) < (b) ? (a) : (b)) #define MAX(a,b) ((a) > (b) ? (a) : (b)) extern char _end; #ifdef CONFIG_NUMA struct cpuinfo_ia64 *_cpu_data[NR_CPUS]; #else struct cpuinfo_ia64 _cpu_data[NR_CPUS] __attribute__ ((section ("__special_page_section"))); mmu_gather_t mmu_gathers[NR_CPUS]; #endif unsigned long ia64_cycles_per_usec; struct ia64_boot_param *ia64_boot_param; struct screen_info screen_info; unsigned long ia64_iobase; /* virtual address for I/O accesses */ struct io_space io_space[MAX_IO_SPACES]; unsigned int num_io_spaces; unsigned char aux_device_present = 0xaa; /* XXX remove this when legacy I/O is gone */ #define COMMAND_LINE_SIZE 512 char saved_command_line[COMMAND_LINE_SIZE]; /* used in proc filesystem */ /* * Entries defined so far: * - boot param structure itself * - memory map * - initrd (optional) * - command line string * - kernel code & data * * More could be added if necessary */ #define IA64_MAX_RSVD_REGIONS 5 struct rsvd_region { unsigned long start; /* virtual address of beginning of element */ unsigned long end; /* virtual address of end of element + 1 */ }; /* * We use a special marker for the end of memory and it uses the extra (+1) slot */ static struct rsvd_region rsvd_region[IA64_MAX_RSVD_REGIONS + 1]; static int num_rsvd_regions; #ifndef CONFIG_DISCONTIGMEM static unsigned long bootmap_start; /* physical address where the bootmem map is located */ static int find_max_pfn (unsigned long start, unsigned long end, void *arg) { unsigned long *max_pfn = arg, pfn; pfn = (PAGE_ALIGN(end - 1) - PAGE_OFFSET) >> PAGE_SHIFT; if (pfn > *max_pfn) *max_pfn = pfn; return 0; } #endif /* !CONFIG_DISCONTIGMEM */ #define IGNORE_PFN0 1 /* XXX fix me: ignore pfn 0 until TLB miss handler is updated... */ #ifdef CONFIG_DISCONTIGMEM /* * efi_memmap_walk() knows nothing about layout of memory across nodes. Find * out to which node a block of memory belongs. Ignore memory that we cannot * identify, and split blocks that run across multiple nodes. * * Take this opportunity to round the start address up and the end address * down to page boundaries. */ void call_pernode_memory (unsigned long start, unsigned long end, void *arg) { unsigned long rs, re; void (*func)(unsigned long, unsigned long, int); int i; start = PAGE_ALIGN(start); end &= PAGE_MASK; if (start >= end) return; func = arg; if (!num_memblks) { /* this machine doesn't have SRAT, */ /* so call func with nid=0, bank=0 */ if (start < end) (*func)(start, end, 0); return; } for (i = 0; i < num_memblks; i++) { rs = MAX(__pa(start), node_memblk[i].start_paddr); re = MIN(__pa(end), node_memblk[i].start_paddr+node_memblk[i].size); if (rs < re) (*func)((unsigned long)__va(rs), (unsigned long)__va(re), node_memblk[i].nid); if ((unsigned long)__va(re) == end) break; } } #else /* CONFIG_DISCONTIGMEM */ static int free_available_memory (unsigned long start, unsigned long end, void *arg) { free_bootmem(__pa(start), end - start); return 0; } #endif /* CONFIG_DISCONTIGMEM */ /* * Filter incoming memory segments based on the primitive map created from * the boot parameters. Segments contained in the map are removed from the * memory ranges. A caller-specified function is called with the memory * ranges that remain after filtering. * This routine does not assume the incoming segments are sorted. */ int filter_rsvd_memory (unsigned long start, unsigned long end, void *arg) { unsigned long range_start, range_end, prev_start; void (*func)(unsigned long, unsigned long, int); int i; #if IGNORE_PFN0 if (start == PAGE_OFFSET) { printk(KERN_WARNING "warning: skipping physical page 0\n"); start += PAGE_SIZE; if (start >= end) return 0; } #endif /* * lowest possible address(walker uses virtual) */ prev_start = PAGE_OFFSET; func = arg; for (i = 0; i < num_rsvd_regions; ++i) { range_start = MAX(start, prev_start); range_end = MIN(end, rsvd_region[i].start); if (range_start < range_end) #ifdef CONFIG_DISCONTIGMEM call_pernode_memory(range_start, range_end, func); #else (*func)(range_start, range_end, 0); #endif /* nothing more available in this segment */ if (range_end == end) return 0; prev_start = rsvd_region[i].end; } /* end of memory marker allows full processing inside loop body */ return 0; } #ifndef CONFIG_DISCONTIGMEM /* * Find a place to put the bootmap and return its starting address in bootmap_start. * This address must be page-aligned. */ static int find_bootmap_location (unsigned long start, unsigned long end, void *arg) { unsigned long needed = *(unsigned long *)arg; unsigned long range_start, range_end, free_start; int i; #if IGNORE_PFN0 if (start == PAGE_OFFSET) { start += PAGE_SIZE; if (start >= end) return 0; } #endif free_start = PAGE_OFFSET; for (i = 0; i < num_rsvd_regions; i++) { range_start = MAX(start, free_start); range_end = MIN(end, rsvd_region[i].start & PAGE_MASK); if (range_end <= range_start) continue; /* skip over empty range */ if (range_end - range_start >= needed) { bootmap_start = __pa(range_start); return 1; /* done */ } /* nothing more available in this segment */ if (range_end == end) return 0; free_start = PAGE_ALIGN(rsvd_region[i].end); } return 0; } #endif /* CONFIG_DISCONTIGMEM */ static void sort_regions (struct rsvd_region *rsvd_region, int max) { int j; /* simple bubble sorting */ while (max--) { for (j = 0; j < max; ++j) { if (rsvd_region[j].start > rsvd_region[j+1].start) { struct rsvd_region tmp; tmp = rsvd_region[j]; rsvd_region[j] = rsvd_region[j + 1]; rsvd_region[j + 1] = tmp; } } } } static void find_memory (void) { # define KERNEL_END ((unsigned long) &_end) unsigned long bootmap_size; unsigned long max_pfn; int n = 0; /* * none of the entries in this table overlap */ rsvd_region[n].start = (unsigned long) ia64_boot_param; rsvd_region[n].end = rsvd_region[n].start + sizeof(*ia64_boot_param); n++; rsvd_region[n].start = (unsigned long) __va(ia64_boot_param->efi_memmap); rsvd_region[n].end = rsvd_region[n].start + ia64_boot_param->efi_memmap_size; n++; rsvd_region[n].start = (unsigned long) __va(ia64_boot_param->command_line); rsvd_region[n].end = (rsvd_region[n].start + strlen(__va(ia64_boot_param->command_line)) + 1); n++; rsvd_region[n].start = ia64_imva(KERNEL_START); rsvd_region[n].end = ia64_imva(KERNEL_END); n++; #ifdef CONFIG_BLK_DEV_INITRD if (ia64_boot_param->initrd_start) { rsvd_region[n].start = (unsigned long)__va(ia64_boot_param->initrd_start); rsvd_region[n].end = rsvd_region[n].start + ia64_boot_param->initrd_size; n++; } #endif /* end of memory marker */ rsvd_region[n].start = ~0UL; rsvd_region[n].end = ~0UL; n++; num_rsvd_regions = n; sort_regions(rsvd_region, num_rsvd_regions); #ifdef CONFIG_DISCONTIGMEM { extern void discontig_mem_init(void); bootmap_size = max_pfn = 0; /* stop gcc warnings */ discontig_mem_init(); } #else /* !CONFIG_DISCONTIGMEM */ /* first find highest page frame number */ max_pfn = 0; efi_memmap_walk(find_max_pfn, &max_pfn); /* how many bytes to cover all the pages */ bootmap_size = bootmem_bootmap_pages(max_pfn) << PAGE_SHIFT; /* look for a location to hold the bootmap */ bootmap_start = ~0UL; efi_memmap_walk(find_bootmap_location, &bootmap_size); if (bootmap_start == ~0UL) panic("Cannot find %ld bytes for bootmap\n", bootmap_size); bootmap_size = init_bootmem(bootmap_start >> PAGE_SHIFT, max_pfn); /* Free all available memory, then mark bootmem-map as being in use. */ efi_memmap_walk(filter_rsvd_memory, free_available_memory); reserve_bootmem(bootmap_start, bootmap_size); #endif /* !CONFIG_DISCONTIGMEM */ #ifdef CONFIG_BLK_DEV_INITRD if (ia64_boot_param->initrd_start) { initrd_start = (unsigned long)__va(ia64_boot_param->initrd_start); initrd_end = initrd_start+ia64_boot_param->initrd_size; printk(KERN_INFO "Initial ramdisk at: 0x%lx (%lu bytes)\n", initrd_start, ia64_boot_param->initrd_size); } #endif } void __init setup_arch (char **cmdline_p) { extern unsigned long ia64_iobase; unsigned long phys_iobase; unw_init(); *cmdline_p = __va(ia64_boot_param->command_line); strncpy(saved_command_line, *cmdline_p, sizeof(saved_command_line)); saved_command_line[COMMAND_LINE_SIZE-1] = '\0'; /* for safety */ efi_init(); #ifdef CONFIG_ACPI_BOOT /* Initialize the ACPI boot-time table parser */ acpi_table_init(); # ifdef CONFIG_ACPI_NUMA acpi_numa_init(); # endif #else # ifdef CONFIG_SMP smp_build_cpu_map(); /* happens, e.g., with the Ski simulator */ # endif #endif /* CONFIG_APCI_BOOT */ iomem_resource.end = ~0UL; /* FIXME probably belongs elsewhere */ find_memory(); #if 0 /* XXX fix me */ init_mm.start_code = (unsigned long) &_stext; init_mm.end_code = (unsigned long) &_etext; init_mm.end_data = (unsigned long) &_edata; init_mm.brk = (unsigned long) &_end; code_resource.start = virt_to_bus(&_text); code_resource.end = virt_to_bus(&_etext) - 1; data_resource.start = virt_to_bus(&_etext); data_resource.end = virt_to_bus(&_edata) - 1; #endif /* process SAL system table: */ ia64_sal_init(efi.sal_systab); #ifdef CONFIG_IA64_GENERIC machvec_init(acpi_get_sysname()); #endif /* * Set `iobase' to the appropriate address in region 6 (uncached access range). * * The EFI memory map is the "preferred" location to get the I/O port space base, * rather the relying on AR.KR0. This should become more clear in future SAL * specs. We'll fall back to getting it out of AR.KR0 if no appropriate entry is * found in the memory map. */ phys_iobase = efi_get_iobase(); if (phys_iobase) /* set AR.KR0 since this is all we use it for anyway */ ia64_set_kr(IA64_KR_IO_BASE, phys_iobase); else { phys_iobase = ia64_get_kr(IA64_KR_IO_BASE); printk(KERN_INFO "No I/O port range found in EFI memory map, falling back " "to AR.KR0\n"); printk(KERN_INFO "I/O port base = 0x%lx\n", phys_iobase); } ia64_iobase = (unsigned long) ioremap(phys_iobase, 0); /* setup legacy IO port space */ io_space[0].mmio_base = ia64_iobase; io_space[0].sparse = 1; num_io_spaces = 1; #ifdef CONFIG_SMP cpu_physical_id(0) = hard_smp_processor_id(); #endif cpu_init(); /* initialize the bootstrap CPU */ #ifdef CONFIG_ACPI_BOOT acpi_boot_init(); #endif #ifdef CONFIG_SERIAL_HCDP if (efi.hcdp) { void setup_serial_hcdp(void *); /* Setup the serial ports described by HCDP */ setup_serial_hcdp(efi.hcdp); } #endif #ifdef CONFIG_VT # if defined(CONFIG_DUMMY_CONSOLE) conswitchp = &dummy_con; # endif # if defined(CONFIG_VGA_CONSOLE) /* * Non-legacy systems may route legacy VGA MMIO range to system * memory. vga_con probes the MMIO hole, so memory looks like * a VGA device to it. The EFI memory map can tell us if it's * memory so we can avoid this problem. */ if (efi_mem_type(0xA0000) != EFI_CONVENTIONAL_MEMORY) conswitchp = &vga_con; # endif #endif #ifdef CONFIG_IA64_MCA /* enable IA-64 Machine Check Abort Handling */ ia64_mca_init(); #endif platform_setup(cmdline_p); paging_init(); unw_create_gate_table(); } /* * Display cpu info for all cpu's. */ static int show_cpuinfo (struct seq_file *m, void *v) { #ifdef CONFIG_SMP # define lpj c->loops_per_jiffy # define cpu c->processor #else # define lpj loops_per_jiffy # define cpu 0 #endif char family[32], features[128], *cp; struct cpuinfo_ia64 *c = v; unsigned long mask; mask = c->features; switch (c->family) { case 0x07: memcpy(family, "Itanium", 8); break; case 0x1f: memcpy(family, "Itanium 2", 10); break; default: sprintf(family, "%u", c->family); break; } /* build the feature string: */ memcpy(features, " standard", 10); cp = features; if (mask & 1) { strcpy(cp, " branchlong"); cp = strchr(cp, '\0'); mask &= ~1UL; } if (mask) sprintf(cp, " 0x%lx", mask); seq_printf(m, "processor : %d\n" "vendor : %s\n" "arch : IA-64\n" "family : %s\n" "model : %u\n" "revision : %u\n" "archrev : %u\n" "features :%s\n" /* don't change this---it _is_ right! */ "cpu number : %lu\n" "cpu regs : %u\n" "cpu MHz : %lu.%06lu\n" "itc MHz : %lu.%06lu\n" "BogoMIPS : %lu.%02lu\n\n", cpu, c->vendor, family, c->model, c->revision, c->archrev, features, c->ppn, c->number, c->proc_freq / 1000000, c->proc_freq % 1000000, c->itc_freq / 1000000, c->itc_freq % 1000000, lpj*HZ/500000, (lpj*HZ/5000) % 100); return 0; #undef lpj #undef cpu } static void * c_start (struct seq_file *m, loff_t *pos) { #ifdef CONFIG_SMP while (*pos < NR_CPUS && !(cpu_online_map & (1UL << *pos))) ++*pos; #endif return *pos < NR_CPUS ? cpu_data(*pos) : NULL; } static void * c_next (struct seq_file *m, void *v, loff_t *pos) { ++*pos; return c_start(m, pos); } static void c_stop (struct seq_file *m, void *v) { } struct seq_operations cpuinfo_op = { .start =c_start, .next = c_next, .stop = c_stop, .show = show_cpuinfo }; void identify_cpu (struct cpuinfo_ia64 *c) { union { unsigned long bits[5]; struct { /* id 0 & 1: */ char vendor[16]; /* id 2 */ u64 ppn; /* processor serial number */ /* id 3: */ unsigned number : 8; unsigned revision : 8; unsigned model : 8; unsigned family : 8; unsigned archrev : 8; unsigned reserved : 24; /* id 4: */ u64 features; } field; } cpuid; pal_vm_info_1_u_t vm1; pal_vm_info_2_u_t vm2; pal_status_t status; unsigned long impl_va_msb = 50, phys_addr_size = 44; /* Itanium defaults */ int i; for (i = 0; i < 5; ++i) cpuid.bits[i] = ia64_get_cpuid(i); memcpy(c->vendor, cpuid.field.vendor, 16); #ifdef CONFIG_SMP c->processor = smp_processor_id(); #endif c->ppn = cpuid.field.ppn; c->number = cpuid.field.number; c->revision = cpuid.field.revision; c->model = cpuid.field.model; c->family = cpuid.field.family; c->archrev = cpuid.field.archrev; c->features = cpuid.field.features; status = ia64_pal_vm_summary(&vm1, &vm2); if (status == PAL_STATUS_SUCCESS) { impl_va_msb = vm2.pal_vm_info_2_s.impl_va_msb; phys_addr_size = vm1.pal_vm_info_1_s.phys_add_size; } printk(KERN_INFO "CPU %d: %lu virtual and %lu physical address bits\n", smp_processor_id(), impl_va_msb + 1, phys_addr_size); c->unimpl_va_mask = ~((7L<<61) | ((1L << (impl_va_msb + 1)) - 1)); c->unimpl_pa_mask = ~((1L<<63) | ((1L << phys_addr_size) - 1)); } /* * cpu_init() initializes state that is per-CPU. This function acts * as a 'CPU state barrier', nothing should get across. */ void cpu_init (void) { extern void __init ia64_mmu_init (void *); unsigned long num_phys_stacked; pal_vm_info_2_u_t vmi; unsigned int max_ctx; struct cpuinfo_ia64 *my_cpu_data; #ifdef CONFIG_NUMA int cpu; /* * If NUMA is configured, the cpu_data array is not preallocated. The boot cpu * allocates entries for every possible cpu. As the remaining cpus come online, * they reallocate a new cpu_data structure on their local node. This extra work * is required because some boot code references all cpu_data structures * before the cpus are actually started. */ for (cpu=0; cpu < NR_CPUS; cpu++) if (node_cpuid[cpu].phys_id == hard_smp_processor_id()) break; my_cpu_data = _cpu_data[cpu]; my_cpu_data->node_data->active_cpu_count++; for (cpu=0; cpu<NR_CPUS; cpu++) _cpu_data[cpu]->cpu_data[smp_processor_id()] = my_cpu_data; #else my_cpu_data = cpu_data(smp_processor_id()); my_cpu_data->mmu_gathers = &mmu_gathers[smp_processor_id()]; #endif /* * We can't pass "local_cpu_data" to identify_cpu() because we haven't called * ia64_mmu_init() yet. And we can't call ia64_mmu_init() first because it * depends on the data returned by identify_cpu(). We break the dependency by * accessing cpu_data() the old way, through identity mapped space. */ identify_cpu(my_cpu_data); #ifdef CONFIG_MCKINLEY { #define FEATURE_SET 16 struct ia64_pal_retval iprv; if (my_cpu_data->family == 0x1f) { PAL_CALL_PHYS(iprv, PAL_PROC_GET_FEATURES, 0, FEATURE_SET, 0); if ((iprv.status == 0) && (iprv.v0 & 0x80) && (iprv.v2 & 0x80)) { PAL_CALL_PHYS(iprv, PAL_PROC_SET_FEATURES, (iprv.v1 | 0x80), FEATURE_SET, 0); } } } #endif /* Clear the stack memory reserved for pt_regs: */ memset(ia64_task_regs(current), 0, sizeof(struct pt_regs)); ia64_set_kr(IA64_KR_FPU_OWNER, 0); /* * Initialize default control register to defer all speculative faults. The * kernel MUST NOT depend on a particular setting of these bits (in other words, * the kernel must have recovery code for all speculative accesses). Turn on * dcr.lc as per recommendation by the architecture team. Most IA-32 apps * shouldn't be affected by this (moral: keep your ia32 locks aligned and you'll * be fine). */ ia64_set_dcr( IA64_DCR_DP | IA64_DCR_DK | IA64_DCR_DX | IA64_DCR_DR | IA64_DCR_DA | IA64_DCR_DD | IA64_DCR_LC); atomic_inc(&init_mm.mm_count); current->active_mm = &init_mm; ia64_mmu_init(my_cpu_data); #ifdef CONFIG_IA32_SUPPORT /* initialize global ia32 state - CR0 and CR4 */ asm volatile ("mov ar.cflg = %0" :: "r" (((ulong) IA32_CR4 << 32) | IA32_CR0)); #endif /* disable all local interrupt sources: */ ia64_set_itv(1 << 16); ia64_set_lrr0(1 << 16); ia64_set_lrr1(1 << 16); ia64_set_pmv(1 << 16); ia64_set_cmcv(1 << 16); /* clear TPR & XTP to enable all interrupt classes: */ ia64_set_tpr(0); #ifdef CONFIG_SMP normal_xtp(); #endif /* set ia64_ctx.max_rid to the maximum RID that is supported by all CPUs: */ if (ia64_pal_vm_summary(NULL, &vmi) == 0) max_ctx = (1U << (vmi.pal_vm_info_2_s.rid_size - 3)) - 1; else { printk(KERN_WARNING "cpu_init: PAL VM summary failed, assuming 18 RID bits\n"); max_ctx = (1U << 15) - 1; /* use architected minimum */ } while (max_ctx < ia64_ctx.max_ctx) { unsigned int old = ia64_ctx.max_ctx; if (cmpxchg(&ia64_ctx.max_ctx, old, max_ctx) == old) break; } if (ia64_pal_rse_info(&num_phys_stacked, 0) != 0) { printk(KERN_WARNING "cpu_init: PAL RSE info failed, assuming 96 physical stacked regs\n"); num_phys_stacked = 96; } local_cpu_data->phys_stacked_size_p8 = num_phys_stacked*8 + 8; platform_cpu_init(); }
Go to most recent revision | Compare with Previous | Blame | View Log