Subversion Repositories or1k

/*
 * Dynamic DMA mapping support.
 *
 * This implementation is for IA-64 platforms that do not support
 * I/O TLBs (aka DMA address translation hardware).
 * Copyright (C) 2000 Asit Mallick <Asit.K.Mallick@intel.com>
 * Copyright (C) 2000 Goutham Rao <goutham.rao@intel.com>
 *
 * 00/12/13 davidm	Rename to swiotlb.c and add mark_clean() to avoid
 *			unnecessary i-cache flushing.
 */
 
#include <linux/mm.h>
#include <linux/module.h>
#include <linux/pci.h>
#include <linux/spinlock.h>
#include <linux/string.h>
#include <linux/types.h>
 
#include <asm/io.h>
#include <asm/pci.h>
#include <asm/dma.h>
 
#include <linux/init.h>
#include <linux/bootmem.h>
 
#define ALIGN(val, align) ((unsigned long)	\
	(((unsigned long) (val) + ((align) - 1)) & ~((align) - 1)))
 
#define OFFSET(val,align) ((unsigned long)	\
	                   ( (val) & ( (align) - 1)))
 
#define SG_ENT_VIRT_ADDRESS(sg)	((sg)->address ? (sg)->address			\
				 : page_address((sg)->page) + (sg)->offset)
#define SG_ENT_PHYS_ADDRESS(SG)	virt_to_phys(SG_ENT_VIRT_ADDRESS(SG))
 
/*
 * Maximum allowable number of contiguous slabs to map,
 * must be a power of 2.  What is the appropriate value ?
 * The complexity of {map,unmap}_single is linearly dependent on this value.
 */
#define IO_TLB_SEGSIZE	128
 
/*
 * log of the size of each IO TLB slab.  The number of slabs is command line controllable.
 */
#define IO_TLB_SHIFT 11
 
/*
 * Used to do a quick range check in swiotlb_unmap_single and swiotlb_sync_single, to see
 * if the memory was in fact allocated by this API.
 */
static char *io_tlb_start, *io_tlb_end;
 
/*
 * The number of IO TLB blocks (in groups of 64) betweeen io_tlb_start and io_tlb_end.
 * This is command line adjustable via setup_io_tlb_npages.
 */
static unsigned long io_tlb_nslabs = 1024;
 
/*
 * This is a free list describing the number of free entries available from each index
 */
static unsigned int *io_tlb_list;
static unsigned int io_tlb_index;
 
/*
 * We need to save away the original address corresponding to a mapped entry for the sync
 * operations.
 */
static unsigned char **io_tlb_orig_addr;
 
/*
 * Protect the above data structures in the map and unmap calls
 */
static spinlock_t io_tlb_lock = SPIN_LOCK_UNLOCKED;
 
static int __init
setup_io_tlb_npages (char *str)
{
	io_tlb_nslabs = simple_strtoul(str, NULL, 0) << (PAGE_SHIFT - IO_TLB_SHIFT);
 
	/* avoid tail segment of size < IO_TLB_SEGSIZE */
	io_tlb_nslabs = ALIGN(io_tlb_nslabs, IO_TLB_SEGSIZE);
 
	return 1;
}
__setup("swiotlb=", setup_io_tlb_npages);
 
 
/*
 * Statically reserve bounce buffer space and initialize bounce buffer data structures for
 * the software IO TLB used to implement the PCI DMA API.
 */
void
swiotlb_init (void)
{
	int i;
 
	/*
	 * Get IO TLB memory from the low pages
	 */
	io_tlb_start = alloc_bootmem_low_pages(io_tlb_nslabs * (1 << IO_TLB_SHIFT));
	if (!io_tlb_start)
		BUG();
	io_tlb_end = io_tlb_start + io_tlb_nslabs * (1 << IO_TLB_SHIFT);
 
	/*
	 * Allocate and initialize the free list array.  This array is used
	 * to find contiguous free memory regions of size up to IO_TLB_SEGSIZE
	 * between io_tlb_start and io_tlb_end.
	 */
	io_tlb_list = alloc_bootmem(io_tlb_nslabs * sizeof(int));
	for (i = 0; i < io_tlb_nslabs; i++)
 		io_tlb_list[i] = IO_TLB_SEGSIZE - OFFSET(i, IO_TLB_SEGSIZE);
	io_tlb_index = 0;
	io_tlb_orig_addr = alloc_bootmem(io_tlb_nslabs * sizeof(char *));
 
	printk(KERN_INFO "Placing software IO TLB between 0x%p - 0x%p\n",
	       (void *) io_tlb_start, (void *) io_tlb_end);
}
 
/*
 * Allocates bounce buffer and returns its kernel virtual address.
 */
static void *
map_single (struct pci_dev *hwdev, char *buffer, size_t size, int direction)
{
	unsigned long flags;
	char *dma_addr;
	unsigned int nslots, stride, index, wrap;
	int i;
 
	/*
	 * For mappings greater than a page size, we limit the stride (and hence alignment)
	 * to a page size.
	 */
	nslots = ALIGN(size, 1 << IO_TLB_SHIFT) >> IO_TLB_SHIFT;
	if (size > (1 << PAGE_SHIFT))
		stride = (1 << (PAGE_SHIFT - IO_TLB_SHIFT));
	else
		stride = 1;
 
	if (!nslots)
		BUG();
 
	/*
	 * Find suitable number of IO TLB entries size that will fit this request and
	 * allocate a buffer from that IO TLB pool.
	 */
	spin_lock_irqsave(&io_tlb_lock, flags);
	{
		wrap = index = ALIGN(io_tlb_index, stride);
 
		if (index >= io_tlb_nslabs)
			wrap = index = 0;
 
		do {
			/*
			 * If we find a slot that indicates we have 'nslots' number of
			 * contiguous buffers, we allocate the buffers from that slot and
			 * mark the entries as '0' indicating unavailable.
			 */
			if (io_tlb_list[index] >= nslots) {
				int count = 0;
 
				for (i = index; i < index + nslots; i++)
					io_tlb_list[i] = 0;
				for (i = index - 1; (OFFSET(i, IO_TLB_SEGSIZE) != IO_TLB_SEGSIZE -1)
				       && io_tlb_list[i]; i--)
					io_tlb_list[i] = ++count;
				dma_addr = io_tlb_start + (index << IO_TLB_SHIFT);
 
				/*
				 * Update the indices to avoid searching in the next round.
				 */
				io_tlb_index = ((index + nslots) < io_tlb_nslabs
						? (index + nslots) : 0);
 
				goto found;
			}
			index += stride;
			if (index >= io_tlb_nslabs)
				index = 0;
		} while (index != wrap);
 
		/*
		 * XXX What is a suitable recovery mechanism here?  We cannot
		 * sleep because we are called from with in interrupts!
		 */
		panic("map_single: could not allocate software IO TLB (%ld bytes)", size);
	}
  found:
	spin_unlock_irqrestore(&io_tlb_lock, flags);
 
	/*
	 * Save away the mapping from the original address to the DMA address.  This is
	 * needed when we sync the memory.  Then we sync the buffer if needed.
	 */
	io_tlb_orig_addr[index] = buffer;
	if (direction == PCI_DMA_TODEVICE || direction == PCI_DMA_BIDIRECTIONAL)
		memcpy(dma_addr, buffer, size);
 
	return dma_addr;
}
 
/*
 * dma_addr is the kernel virtual address of the bounce buffer to unmap.
 */
static void
unmap_single (struct pci_dev *hwdev, char *dma_addr, size_t size, int direction)
{
	unsigned long flags;
	int i, nslots = ALIGN(size, 1 << IO_TLB_SHIFT) >> IO_TLB_SHIFT;
	int index = (dma_addr - io_tlb_start) >> IO_TLB_SHIFT;
	char *buffer = io_tlb_orig_addr[index];
 
	/*
	 * First, sync the memory before unmapping the entry
	 */
	if ((direction == PCI_DMA_FROMDEVICE) || (direction == PCI_DMA_BIDIRECTIONAL))
		/*
		 * bounce... copy the data back into the original buffer * and delete the
		 * bounce buffer.
		 */
		memcpy(buffer, dma_addr, size);
 
	/*
	 * Return the buffer to the free list by setting the corresponding entries to
	 * indicate the number of contigous entries available.  While returning the
	 * entries to the free list, we merge the entries with slots below and above the
	 * pool being returned.
	 */
	spin_lock_irqsave(&io_tlb_lock, flags);
	{
		int count = ((index + nslots) < ALIGN(index + 1, IO_TLB_SEGSIZE) ?
			     io_tlb_list[index + nslots] : 0);
		/*
		 * Step 1: return the slots to the free list, merging the slots with
		 * superceeding slots
		 */
		for (i = index + nslots - 1; i >= index; i--)
			io_tlb_list[i] = ++count;
		/*
		 * Step 2: merge the returned slots with the preceeding slots, if
		 * available (non zero)
		 */
		for (i = index - 1;  (OFFSET(i, IO_TLB_SEGSIZE) != IO_TLB_SEGSIZE -1) &&
		       io_tlb_list[i]; i--)
			io_tlb_list[i] = ++count;
	}
	spin_unlock_irqrestore(&io_tlb_lock, flags);
}
 
static void
sync_single (struct pci_dev *hwdev, char *dma_addr, size_t size, int direction)
{
	int index = (dma_addr - io_tlb_start) >> IO_TLB_SHIFT;
	char *buffer = io_tlb_orig_addr[index];
 
	/*
	 * bounce... copy the data back into/from the original buffer
	 * XXX How do you handle PCI_DMA_BIDIRECTIONAL here ?
	 */
	if (direction == PCI_DMA_FROMDEVICE)
		memcpy(buffer, dma_addr, size);
	else if (direction == PCI_DMA_TODEVICE)
		memcpy(dma_addr, buffer, size);
	else
		BUG();
}
 
void *
swiotlb_alloc_consistent (struct pci_dev *hwdev, size_t size, dma_addr_t *dma_handle)
{
	unsigned long pci_addr;
	int gfp = GFP_ATOMIC;
	void *ret;
 
	/*
	 * Alloc_consistent() is defined to return memory < 4GB, no matter what the DMA
	 * mask says.
	 */
	gfp |= GFP_DMA;	/* XXX fix me: should change this to GFP_32BIT or ZONE_32BIT */
	ret = (void *)__get_free_pages(gfp, get_order(size));
	if (!ret)
		return NULL;
 
	memset(ret, 0, size);
	pci_addr = virt_to_phys(ret);
	if (hwdev && (pci_addr & ~hwdev->dma_mask) != 0)
		panic("swiotlb_alloc_consistent: allocated memory is out of range for PCI device");
	*dma_handle = pci_addr;
	return ret;
}
 
void
swiotlb_free_consistent (struct pci_dev *hwdev, size_t size, void *vaddr, dma_addr_t dma_handle)
{
	free_pages((unsigned long) vaddr, get_order(size));
}
 
/*
 * Map a single buffer of the indicated size for DMA in streaming mode.  The PCI address
 * to use is returned.
 *
 * Once the device is given the dma address, the device owns this memory until either
 * swiotlb_unmap_single or swiotlb_dma_sync_single is performed.
 */
dma_addr_t
swiotlb_map_single (struct pci_dev *hwdev, void *ptr, size_t size, int direction)
{
	unsigned long pci_addr = virt_to_phys(ptr);
 
	if (direction == PCI_DMA_NONE)
		BUG();
	/*
	 * Check if the PCI device can DMA to ptr... if so, just return ptr
	 */
	if ((pci_addr & ~hwdev->dma_mask) == 0)
		/*
		 * Device is bit capable of DMA'ing to the buffer... just return the PCI
		 * address of ptr
		 */
		return pci_addr;
 
	/*
	 * get a bounce buffer:
	 */
	pci_addr = virt_to_phys(map_single(hwdev, ptr, size, direction));
 
	/*
	 * Ensure that the address returned is DMA'ble:
	 */
	if ((pci_addr & ~hwdev->dma_mask) != 0)
		panic("map_single: bounce buffer is not DMA'ble");
 
	return pci_addr;
}
 
/*
 * Since DMA is i-cache coherent, any (complete) pages that were written via
 * DMA can be marked as "clean" so that update_mmu_cache() doesn't have to
 * flush them when they get mapped into an executable vm-area.
 */
static void
mark_clean (void *addr, size_t size)
{
	unsigned long pg_addr, end;
 
	pg_addr = PAGE_ALIGN((unsigned long) addr);
	end = (unsigned long) addr + size;
	while (pg_addr + PAGE_SIZE <= end) {
		struct page *page = virt_to_page((void *)pg_addr);
		set_bit(PG_arch_1, &page->flags);
		pg_addr += PAGE_SIZE;
	}
}
 
/*
 * Unmap a single streaming mode DMA translation.  The dma_addr and size must match what
 * was provided for in a previous swiotlb_map_single call.  All other usages are
 * undefined.
 *
 * After this call, reads by the cpu to the buffer are guarenteed to see whatever the
 * device wrote there.
 */
void
swiotlb_unmap_single (struct pci_dev *hwdev, dma_addr_t pci_addr, size_t size, int direction)
{
	char *dma_addr = phys_to_virt(pci_addr);
 
	if (direction == PCI_DMA_NONE)
		BUG();
	if (dma_addr >= io_tlb_start && dma_addr < io_tlb_end)
		unmap_single(hwdev, dma_addr, size, direction);
	else if (direction == PCI_DMA_FROMDEVICE)
		mark_clean(dma_addr, size);
}
 
/*
 * Make physical memory consistent for a single streaming mode DMA translation after a
 * transfer.
 *
 * If you perform a swiotlb_map_single() but wish to interrogate the buffer using the cpu,
 * yet do not wish to teardown the PCI dma mapping, you must call this function before
 * doing so.  At the next point you give the PCI dma address back to the card, the device
 * again owns the buffer.
 */
void
swiotlb_sync_single (struct pci_dev *hwdev, dma_addr_t pci_addr, size_t size, int direction)
{
	char *dma_addr = phys_to_virt(pci_addr);
 
	if (direction == PCI_DMA_NONE)
		BUG();
	if (dma_addr >= io_tlb_start && dma_addr < io_tlb_end)
		sync_single(hwdev, dma_addr, size, direction);
	else if (direction == PCI_DMA_FROMDEVICE)
		mark_clean(dma_addr, size);
}
 
/*
 * Map a set of buffers described by scatterlist in streaming mode for DMA.  This is the
 * scather-gather version of the above swiotlb_map_single interface.  Here the scatter
 * gather list elements are each tagged with the appropriate dma address and length.  They
 * are obtained via sg_dma_{address,length}(SG).
 *
 * NOTE: An implementation may be able to use a smaller number of
 *       DMA address/length pairs than there are SG table elements.
 *       (for example via virtual mapping capabilities)
 *       The routine returns the number of addr/length pairs actually
 *       used, at most nents.
 *
 * Device ownership issues as mentioned above for swiotlb_map_single are the same here.
 */
int
swiotlb_map_sg (struct pci_dev *hwdev, struct scatterlist *sg, int nelems, int direction)
{
	int i;
 
	if (direction == PCI_DMA_NONE)
		BUG();
 
	for (i = 0; i < nelems; i++, sg++) {
		void * virt_address = SG_ENT_VIRT_ADDRESS(sg);
		unsigned long phys_address = virt_to_phys(virt_address);
 
		sg->dma_length = sg->length;
		if (phys_address & ~hwdev->dma_mask)
			sg->dma_address = virt_to_phys(map_single(hwdev,
			                                          virt_address,
			                                          sg->length,
			                                          direction));
		else
			sg->dma_address = phys_address;
	}
	return nelems;
}
 
/*
 * Unmap a set of streaming mode DMA translations.  Again, cpu read rules concerning calls
 * here are the same as for swiotlb_unmap_single() above.
 */
void
swiotlb_unmap_sg (struct pci_dev *hwdev, struct scatterlist *sg, int nelems, int direction)
{
	int i;
 
	if (direction == PCI_DMA_NONE)
		BUG();
 
	for (i = 0; i < nelems; i++, sg++)
		if (sg->dma_address != virt_to_phys(SG_ENT_VIRT_ADDRESS(sg))) {
			unmap_single(hwdev, phys_to_virt(sg->dma_address),
			             sg->dma_length, direction);
		} else if (direction == PCI_DMA_FROMDEVICE)
			mark_clean(SG_ENT_VIRT_ADDRESS(sg), sg->length);
}
 
/*
 * Make physical memory consistent for a set of streaming mode DMA translations after a
 * transfer.
 *
 * The same as swiotlb_dma_sync_single but for a scatter-gather list, same rules and
 * usage.
 */
void
swiotlb_sync_sg (struct pci_dev *hwdev, struct scatterlist *sg, int nelems, int direction)
{
	int i;
 
	if (direction == PCI_DMA_NONE)
		BUG();
 
	for (i = 0; i < nelems; i++, sg++)
		if (sg->dma_address != virt_to_phys(SG_ENT_VIRT_ADDRESS(sg)))
			sync_single(hwdev, phys_to_virt(sg->dma_address),
			            sg->dma_length, direction);
}
 
/*
 * Return whether the given PCI device DMA address mask can be supported properly.  For
 * example, if your device can only drive the low 24-bits during PCI bus mastering, then
 * you would pass 0x00ffffff as the mask to this function.
 */
int
swiotlb_pci_dma_supported (struct pci_dev *hwdev, u64 mask)
{
	return 1;
}
 
EXPORT_SYMBOL(swiotlb_init);
EXPORT_SYMBOL(swiotlb_map_single);
EXPORT_SYMBOL(swiotlb_unmap_single);
EXPORT_SYMBOL(swiotlb_map_sg);
EXPORT_SYMBOL(swiotlb_unmap_sg);
EXPORT_SYMBOL(swiotlb_sync_single);
EXPORT_SYMBOL(swiotlb_sync_sg);
EXPORT_SYMBOL(swiotlb_alloc_consistent);
EXPORT_SYMBOL(swiotlb_free_consistent);
EXPORT_SYMBOL(swiotlb_pci_dma_supported);