Subversion Repositories or1k

/*
 * Setup pointers to hardware dependent routines.
 *
 * This file is subject to the terms and conditions of the GNU General Public
 * License.  See the file "COPYING" in the main directory of this archive
 * for more details.
 *
 * Copyright (C) 1996, 1997 by Ralf Baechle
 * Copyright (C) 2001, 2002, 2003 by Liam Davies (ldavies@agile.tv)
 *
 */
 
#include <linux/config.h>
#include <linux/interrupt.h>
#include <linux/pci.h>
#include <linux/mc146818rtc.h>
#include <linux/init.h>
#include <linux/ide.h>
 
#include <asm/bootinfo.h>
#include <asm/time.h>
#include <asm/io.h>
#include <asm/irq.h>
#include <asm/processor.h>
#include <asm/reboot.h>
#include <asm/gt64120/gt64120.h>
 
#include <asm/cobalt/cobalt.h>
 
extern void cobalt_machine_restart(char *command);
extern void cobalt_machine_halt(void);
extern void cobalt_machine_power_off(void);
 
extern struct rtc_ops std_rtc_ops;
extern struct ide_ops std_ide_ops;
 
 
char arcs_cmdline[CL_SIZE] = {
 "console=ttyS0,115200 "
#ifdef CONFIG_IP_PNP
 "ip=on "
#endif
#ifdef CONFIG_ROOT_NFS
 "root=/dev/nfs "
#else
 "root=/dev/hda1 "
#endif
 };
 
const char *get_system_type(void)
{
	return "MIPS Cobalt";
}
 
 
static void __init cobalt_time_init(void)
{
	rtc_ops = &std_rtc_ops;
}
 
static void __init cobalt_timer_setup(struct irqaction *irq)
{
	/* Load timer value for 150 Hz */
	GALILEO_OUTL(500000, GT_TC0_OFS);
 
	/* Register our timer interrupt */
	setup_irq(COBALT_TIMER_IRQ, irq);
 
	/* Enable timer ints */
	GALILEO_OUTL((GALILEO_ENTC0 | GALILEO_SELTC0), GT_TC_CONTROL_OFS);
	/* Unmask timer int */
	GALILEO_OUTL(0x100, GT_INTRMASK_OFS);
}
 
 
void __init cobalt_setup(void)
{
 
	_machine_restart = cobalt_machine_restart;
	_machine_halt = cobalt_machine_halt;
	_machine_power_off = cobalt_machine_power_off;
 
	board_time_init = cobalt_time_init;
	board_timer_setup = cobalt_timer_setup;
 
#ifdef CONFIG_BLK_DEV_IDE
	ide_ops = &std_ide_ops;
#endif
 
        set_io_port_base(KSEG1ADDR(0x10000000));
 
	/*
	 * This is a prom style console. We just poke at the
	 *  UART to make it talk.
	 * Only use this console if you really screw up and can't
	 *  get to the stage of setting up a real serial console.
	 */
	/*ns16550_setup_console();*/
}
 
/* Prom init. We read our one and only communication with the
    firmware. Grab the amount of installed memory */
void __init prom_init(int argc)
{
	mips_machgroup = MACH_GROUP_COBALT;
 
	add_memory_region(0x0, argc & 0x7fffffff, BOOT_MEM_RAM);
}
 
void __init prom_free_prom_memory(void)
{
	/* Nothing to do! */
}