URL
https://opencores.org/ocsvn/or1k/or1k/trunk
Subversion Repositories or1k
[/] [or1k/] [trunk/] [linux/] [linux-2.4/] [arch/] [mips/] [ddb5xxx/] [ddb5476/] [pci_ops.c] - Rev 1275
Go to most recent revision | Compare with Previous | Blame | View Log
/* * Copyright 2001 MontaVista Software Inc. * Author: Jun Sun, jsun@mvista.com or jsun@junsun.net * * arch/mips/ddb5xxx/ddb5476/pci_ops.c * Define the pci_ops for DB5477. * * Much of the code is derived from the original DDB5074 port by * Geert Uytterhoeven <geert@sonycom.com> * * This program is free software; you can redistribute it and/or modify it * under the terms of the GNU General Public License as published by the * Free Software Foundation; either version 2 of the License, or (at your * option) any later version. * */ #include <linux/config.h> #include <linux/pci.h> #include <linux/kernel.h> #include <linux/types.h> #include <asm/addrspace.h> #include <asm/debug.h> #include <asm/ddb5xxx/ddb5xxx.h> /* * config_swap structure records what set of pdar/pmr are used * to access pci config space. It also provides a place hold the * original values for future restoring. */ struct pci_config_swap { u32 pdar; u32 pmr; u32 config_base; u32 config_size; u32 pdar_backup; u32 pmr_backup; }; /* * On DDB5476, we have one set of swap registers */ struct pci_config_swap ext_pci_swap = { DDB_PCIW0, DDB_PCIINIT0, DDB_PCI_CONFIG_BASE, DDB_PCI_CONFIG_SIZE }; /* * access config space */ static inline u32 ddb_access_config_base(struct pci_config_swap *swap, u32 bus,/* 0 means top level bus */ u32 slot_num) { u32 pci_addr = 0; u32 pciinit_offset = 0; u32 virt_addr = swap->config_base; u32 option; /* * BUG: skip host PCI controller. Its BARS are bogus. */ if (slot_num == 12) slot_num = 0; /* minimum pdar (window) size is 2MB */ db_assert(swap->config_size >= (2 << 20)); db_assert(slot_num < (1 << 5)); db_assert(bus < (1 << 8)); /* backup registers */ swap->pdar_backup = ddb_in32(swap->pdar); swap->pmr_backup = ddb_in32(swap->pmr); /* set the pdar (pci window) register */ ddb_set_pdar(swap->pdar, swap->config_base, swap->config_size, 32, /* 32 bit wide */ 0, /* not on local memory bus */ 0); /* not visible from PCI bus (N/A) */ /* * calcuate the absolute pci config addr; * according to the spec, we start scanning from adr:11 (0x800) */ if (bus == 0) { /* type 0 config */ pci_addr = 0x800 << slot_num; } else { /* type 1 config */ pci_addr = (bus << 16) | (slot_num << 11); /* panic("ddb_access_config_base: we don't support type 1 config Yet"); */ } /* * if pci_addr is less than pci config window size, we set * pciinit_offset to 0 and adjust the virt_address. * Otherwise we will try to adjust pciinit_offset. */ if (pci_addr < swap->config_size) { virt_addr = KSEG1ADDR(swap->config_base + pci_addr); pciinit_offset = 0; } else { db_assert( (pci_addr & (swap->config_size - 1)) == 0); virt_addr = KSEG1ADDR(swap->config_base); pciinit_offset = pci_addr; } /* set the pmr register */ option = DDB_PCI_ACCESS_32; if (bus != 0) option |= DDB_PCI_CFGTYPE1; ddb_set_pmr(swap->pmr, DDB_PCICMD_CFG, pciinit_offset, option); return virt_addr; } static inline void ddb_close_config_base(struct pci_config_swap *swap) { ddb_out32(swap->pdar, swap->pdar_backup); ddb_out32(swap->pmr, swap->pmr_backup); } static int read_config_dword(struct pci_config_swap *swap, struct pci_dev *dev, u32 where, u32 *val) { u32 bus, slot_num, func_num; u32 base; db_assert((where & 3) == 0); db_assert(where < (1 << 8)); /* check if the bus is top-level */ if (dev->bus->parent != NULL) { bus = dev->bus->number; db_assert(bus != 0); } else { bus = 0; } slot_num = PCI_SLOT(dev->devfn); func_num = PCI_FUNC(dev->devfn); base = ddb_access_config_base(swap, bus, slot_num); *val = *(volatile u32*) (base + (func_num << 8) + where); ddb_close_config_base(swap); return PCIBIOS_SUCCESSFUL; } static int read_config_word(struct pci_config_swap *swap, struct pci_dev *dev, u32 where, u16 *val) { int status; u32 result; db_assert((where & 1) == 0); status = read_config_dword(swap, dev, where & ~3, &result); if (where & 2) result >>= 16; *val = result & 0xffff; return status; } static int read_config_byte(struct pci_config_swap *swap, struct pci_dev *dev, u32 where, u8 *val) { int status; u32 result; status = read_config_dword(swap, dev, where & ~3, &result); if (where & 1) result >>= 8; if (where & 2) result >>= 16; *val = result & 0xff; return status; } static int write_config_dword(struct pci_config_swap *swap, struct pci_dev *dev, u32 where, u32 val) { u32 bus, slot_num, func_num; u32 base; db_assert((where & 3) == 0); db_assert(where < (1 << 8)); /* check if the bus is top-level */ if (dev->bus->parent != NULL) { bus = dev->bus->number; db_assert(bus != 0); } else { bus = 0; } slot_num = PCI_SLOT(dev->devfn); func_num = PCI_FUNC(dev->devfn); base = ddb_access_config_base(swap, bus, slot_num); *(volatile u32*) (base + (func_num << 8) + where) = val; ddb_close_config_base(swap); return PCIBIOS_SUCCESSFUL; } static int write_config_word(struct pci_config_swap *swap, struct pci_dev *dev, u32 where, u16 val) { int status, shift=0; u32 result; db_assert((where & 1) == 0); status = read_config_dword(swap, dev, where & ~3, &result); if (status != PCIBIOS_SUCCESSFUL) return status; if (where & 2) shift += 16; result &= ~(0xffff << shift); result |= val << shift; return write_config_dword(swap, dev, where & ~3, result); } static int write_config_byte(struct pci_config_swap *swap, struct pci_dev *dev, u32 where, u8 val) { int status, shift=0; u32 result; status = read_config_dword(swap, dev, where & ~3, &result); if (status != PCIBIOS_SUCCESSFUL) return status; if (where & 2) shift += 16; if (where & 1) shift += 8; result &= ~(0xff << shift); result |= val << shift; return write_config_dword(swap, dev, where & ~3, result); } #define MAKE_PCI_OPS(prefix, rw, unitname, unittype, pciswap) \ static int prefix##_##rw##_config_##unitname(struct pci_dev *dev, int where, unittype val) \ { \ return rw##_config_##unitname(pciswap, \ dev, \ where, \ val); \ } MAKE_PCI_OPS(extpci, read, byte, u8 *, &ext_pci_swap) MAKE_PCI_OPS(extpci, read, word, u16 *, &ext_pci_swap) MAKE_PCI_OPS(extpci, read, dword, u32 *, &ext_pci_swap) MAKE_PCI_OPS(extpci, write, byte, u8, &ext_pci_swap) MAKE_PCI_OPS(extpci, write, word, u16, &ext_pci_swap) MAKE_PCI_OPS(extpci, write, dword, u32, &ext_pci_swap) struct pci_ops ddb5476_ext_pci_ops ={ extpci_read_config_byte, extpci_read_config_word, extpci_read_config_dword, extpci_write_config_byte, extpci_write_config_word, extpci_write_config_dword };
Go to most recent revision | Compare with Previous | Blame | View Log