Subversion Repositories or1k

/*
 * gdb-low.S contains the low-level trap handler for the GDB stub.
 *
 * Copyright (C) 1995 Andreas Busse
 */
#include <linux/config.h>
#include <linux/sys.h>

#include <asm/asm.h>
#include <asm/errno.h>
#include <asm/mipsregs.h>
#include <asm/regdef.h>
#include <asm/stackframe.h>
#include <asm/gdb-stub.h>

/*
 * [jsun] We reserves about 2x GDB_FR_SIZE in stack.  The lower (addressed)
 * part is used to store registers and passed to exception handler.
 * The upper part is reserved for "call func" feature where gdb client
 * saves some of the regs, setups call frame and passes args.
 *
 * A trace shows about 200 bytes are used to store about half of all regs.
 * The rest should be big enough for frame setup and passing args.
 */

/*
 * The low level trap handler
 */
                .align  5
                NESTED(trap_low, GDB_FR_SIZE, sp)
                .set    noat
                .set    noreorder

                mfc0    k0,CP0_STATUS
                sll     k0,3                    /* extract cu0 bit */
                bltz    k0,1f
                move    k1,sp

                /*
                 * Called from user mode, go somewhere else.
                 */
                lui     k1,%hi(saved_vectors)
                mfc0    k0,CP0_CAUSE
                andi    k0,k0,0x7c
                add     k1,k1,k0
                lw      k0,%lo(saved_vectors)(k1)
                jr      k0
                nop
1:
                move    k0,sp
                subu    sp,k1,GDB_FR_SIZE*2     # see comment above
                sd      k0,GDB_FR_REG29(sp)
                sd      v0,GDB_FR_REG2(sp)

/*
 * First save the CP0 and special registers
 */

                mfc0    v0,CP0_STATUS
                sd      v0,GDB_FR_STATUS(sp)
                mfc0    v0,CP0_CAUSE
                sd      v0,GDB_FR_CAUSE(sp)
                dmfc0   v0,CP0_EPC
                sd      v0,GDB_FR_EPC(sp)
                dmfc0   v0,CP0_BADVADDR
                sd      v0,GDB_FR_BADVADDR(sp)
                mfhi    v0
                sd      v0,GDB_FR_HI(sp)
                mflo    v0
                sd      v0,GDB_FR_LO(sp)

/*
 * Now the integer registers
 */

                sd      zero,GDB_FR_REG0(sp)            /* I know... */
                sd      $1,GDB_FR_REG1(sp)
                /* v0 already saved */
                sd      v1,GDB_FR_REG3(sp)
                sd      a0,GDB_FR_REG4(sp)
                sd      a1,GDB_FR_REG5(sp)
                sd      a2,GDB_FR_REG6(sp)
                sd      a3,GDB_FR_REG7(sp)
                sd      a4,GDB_FR_REG8(sp)
                sd      a5,GDB_FR_REG9(sp)
                sd      a6,GDB_FR_REG10(sp)
                sd      a7,GDB_FR_REG11(sp)
                sd      t0,GDB_FR_REG12(sp)
                sd      t1,GDB_FR_REG13(sp)
                sd      t2,GDB_FR_REG14(sp)
                sd      t3,GDB_FR_REG15(sp)
                sd      s0,GDB_FR_REG16(sp)
                sd      s1,GDB_FR_REG17(sp)
                sd      s2,GDB_FR_REG18(sp)
                sd      s3,GDB_FR_REG19(sp)
                sd      s4,GDB_FR_REG20(sp)
                sd      s5,GDB_FR_REG21(sp)
                sd      s6,GDB_FR_REG22(sp)
                sd      s7,GDB_FR_REG23(sp)
                sd      t8,GDB_FR_REG24(sp)
                sd      t9,GDB_FR_REG25(sp)
                sd      k0,GDB_FR_REG26(sp)
                sd      k1,GDB_FR_REG27(sp)
                sd      gp,GDB_FR_REG28(sp)
                /* sp already saved */
                sd      fp,GDB_FR_REG30(sp)
                sd      ra,GDB_FR_REG31(sp)

                CLI                             /* disable interrupts */

/*
 * Followed by the floating point registers
 */
                mfc0    v0,CP0_STATUS           /* FPU enabled? */
                srl     v0,v0,16
                andi    v0,v0,(ST0_CU1 >> 16)

                beqz    v0,2f                   /* disabled, skip */
                 nop

                sdc1    $0,GDB_FR_FPR0(sp)
                sdc1    $1,GDB_FR_FPR1(sp)
                sdc1    $2,GDB_FR_FPR2(sp)
                sdc1    $3,GDB_FR_FPR3(sp)
                sdc1    $4,GDB_FR_FPR4(sp)
                sdc1    $5,GDB_FR_FPR5(sp)
                sdc1    $6,GDB_FR_FPR6(sp)
                sdc1    $7,GDB_FR_FPR7(sp)
                sdc1    $8,GDB_FR_FPR8(sp)
                sdc1    $9,GDB_FR_FPR9(sp)
                sdc1    $10,GDB_FR_FPR10(sp)
                sdc1    $11,GDB_FR_FPR11(sp)
                sdc1    $12,GDB_FR_FPR12(sp)
                sdc1    $13,GDB_FR_FPR13(sp)
                sdc1    $14,GDB_FR_FPR14(sp)
                sdc1    $15,GDB_FR_FPR15(sp)
                sdc1    $16,GDB_FR_FPR16(sp)
                sdc1    $17,GDB_FR_FPR17(sp)
                sdc1    $18,GDB_FR_FPR18(sp)
                sdc1    $19,GDB_FR_FPR19(sp)
                sdc1    $20,GDB_FR_FPR20(sp)
                sdc1    $21,GDB_FR_FPR21(sp)
                sdc1    $22,GDB_FR_FPR22(sp)
                sdc1    $23,GDB_FR_FPR23(sp)
                sdc1    $24,GDB_FR_FPR24(sp)
                sdc1    $25,GDB_FR_FPR25(sp)
                sdc1    $26,GDB_FR_FPR26(sp)
                sdc1    $27,GDB_FR_FPR27(sp)
                sdc1    $28,GDB_FR_FPR28(sp)
                sdc1    $29,GDB_FR_FPR29(sp)
                sdc1    $30,GDB_FR_FPR30(sp)
                sdc1    $31,GDB_FR_FPR31(sp)

/*
 * FPU control registers
 */

                cfc1    v0,CP1_STATUS
                sd      v0,GDB_FR_FSR(sp)
                cfc1    v0,CP1_REVISION
                sd      v0,GDB_FR_FIR(sp)

/*
 * Current stack frame ptr
 */

2:
                sd      sp,GDB_FR_FRP(sp)

/*
 * CP0 registers (R4000/R4400 unused registers skipped)
 */

                mfc0    v0,CP0_INDEX
                sd      v0,GDB_FR_CP0_INDEX(sp)
                mfc0    v0,CP0_RANDOM
                sd      v0,GDB_FR_CP0_RANDOM(sp)
                dmfc0   v0,CP0_ENTRYLO0
                sd      v0,GDB_FR_CP0_ENTRYLO0(sp)
                dmfc0   v0,CP0_ENTRYLO1
                sd      v0,GDB_FR_CP0_ENTRYLO1(sp)
                dmfc0   v0,CP0_CONTEXT
                sd      v0,GDB_FR_CP0_CONTEXT(sp)
                mfc0    v0,CP0_PAGEMASK
                sd      v0,GDB_FR_CP0_PAGEMASK(sp)
                mfc0    v0,CP0_WIRED
                sd      v0,GDB_FR_CP0_WIRED(sp)
                dmfc0   v0,CP0_ENTRYHI
                sd      v0,GDB_FR_CP0_ENTRYHI(sp)
                mfc0    v0,CP0_PRID
                sd      v0,GDB_FR_CP0_PRID(sp)

                .set    at

/*
 * Continue with the higher level handler
 */

                move    a0,sp

                jal     handle_exception
                 nop

/*
 * Restore all writable registers, in reverse order
 */

                .set    noat

                ld      v0,GDB_FR_CP0_ENTRYHI(sp)
                ld      v1,GDB_FR_CP0_WIRED(sp)
                dmtc0   v0,CP0_ENTRYHI
                mtc0    v1,CP0_WIRED
                ld      v0,GDB_FR_CP0_PAGEMASK(sp)
                ld      v1,GDB_FR_CP0_ENTRYLO1(sp)
                mtc0    v0,CP0_PAGEMASK
                dmtc0   v1,CP0_ENTRYLO1
                ld      v0,GDB_FR_CP0_ENTRYLO0(sp)
                ld      v1,GDB_FR_CP0_INDEX(sp)
                dmtc0   v0,CP0_ENTRYLO0
                ld      v0,GDB_FR_CP0_CONTEXT(sp)
                mtc0    v1,CP0_INDEX
                dmtc0   v0,CP0_CONTEXT


/*
 * Next, the floating point registers
 */
                mfc0    v0,CP0_STATUS           /* check if the FPU is enabled */
                srl     v0,v0,16
                andi    v0,v0,(ST0_CU1 >> 16)

                beqz    v0,3f                   /* disabled, skip */
                 nop

                ldc1    $31,GDB_FR_FPR31(sp)
                ldc1    $30,GDB_FR_FPR30(sp)
                ldc1    $29,GDB_FR_FPR29(sp)
                ldc1    $28,GDB_FR_FPR28(sp)
                ldc1    $27,GDB_FR_FPR27(sp)
                ldc1    $26,GDB_FR_FPR26(sp)
                ldc1    $25,GDB_FR_FPR25(sp)
                ldc1    $24,GDB_FR_FPR24(sp)
                ldc1    $23,GDB_FR_FPR23(sp)
                ldc1    $22,GDB_FR_FPR22(sp)
                ldc1    $21,GDB_FR_FPR21(sp)
                ldc1    $20,GDB_FR_FPR20(sp)
                ldc1    $19,GDB_FR_FPR19(sp)
                ldc1    $18,GDB_FR_FPR18(sp)
                ldc1    $17,GDB_FR_FPR17(sp)
                ldc1    $16,GDB_FR_FPR16(sp)
                ldc1    $15,GDB_FR_FPR15(sp)
                ldc1    $14,GDB_FR_FPR14(sp)
                ldc1    $13,GDB_FR_FPR13(sp)
                ldc1    $12,GDB_FR_FPR12(sp)
                ldc1    $11,GDB_FR_FPR11(sp)
                ldc1    $10,GDB_FR_FPR10(sp)
                ldc1    $9,GDB_FR_FPR9(sp)
                ldc1    $8,GDB_FR_FPR8(sp)
                ldc1    $7,GDB_FR_FPR7(sp)
                ldc1    $6,GDB_FR_FPR6(sp)
                ldc1    $5,GDB_FR_FPR5(sp)
                ldc1    $4,GDB_FR_FPR4(sp)
                ldc1    $3,GDB_FR_FPR3(sp)
                ldc1    $2,GDB_FR_FPR2(sp)
                ldc1    $1,GDB_FR_FPR1(sp)
                ldc1    $0,GDB_FR_FPR0(sp)

/*
 * Now the CP0 and integer registers
 */

3:
                mfc0    t0,CP0_STATUS
                ori     t0,0x1f
                xori    t0,0x1f
                mtc0    t0,CP0_STATUS

                ld      v0,GDB_FR_STATUS(sp)
                ld      v1,GDB_FR_EPC(sp)
                mtc0    v0,CP0_STATUS
                dmtc0   v1,CP0_EPC
                ld      v0,GDB_FR_HI(sp)
                ld      v1,GDB_FR_LO(sp)
                mthi    v0
                mtlo    v0
                ld      ra,GDB_FR_REG31(sp)
                ld      fp,GDB_FR_REG30(sp)
                ld      gp,GDB_FR_REG28(sp)
                ld      k1,GDB_FR_REG27(sp)
                ld      k0,GDB_FR_REG26(sp)
                ld      t9,GDB_FR_REG25(sp)
                ld      t8,GDB_FR_REG24(sp)
                ld      s7,GDB_FR_REG23(sp)
                ld      s6,GDB_FR_REG22(sp)
                ld      s5,GDB_FR_REG21(sp)
                ld      s4,GDB_FR_REG20(sp)
                ld      s3,GDB_FR_REG19(sp)
                ld      s2,GDB_FR_REG18(sp)
                ld      s1,GDB_FR_REG17(sp)
                ld      s0,GDB_FR_REG16(sp)
                ld      t3,GDB_FR_REG15(sp)
                ld      t2,GDB_FR_REG14(sp)
                ld      t1,GDB_FR_REG13(sp)
                ld      t0,GDB_FR_REG12(sp)
                ld      a7,GDB_FR_REG11(sp)
                ld      a6,GDB_FR_REG10(sp)
                ld      a5,GDB_FR_REG9(sp)
                ld      a4,GDB_FR_REG8(sp)
                ld      a3,GDB_FR_REG7(sp)
                ld      a2,GDB_FR_REG6(sp)
                ld      a1,GDB_FR_REG5(sp)
                ld      a0,GDB_FR_REG4(sp)
                ld      v1,GDB_FR_REG3(sp)
                ld      v0,GDB_FR_REG2(sp)
                ld      $1,GDB_FR_REG1(sp)
#if defined(CONFIG_CPU_R3000) || defined(CONFIG_CPU_TX39XX)
                ld      k0, GDB_FR_EPC(sp)
                ld      sp, GDB_FR_REG29(sp)            /* Deallocate stack */
                jr      k0
                rfe
#else
                ld      sp, GDB_FR_REG29(sp)            /* Deallocate stack */

                .set    mips3
                eret
                .set    mips0
#endif
                .set    at
                .set    reorder
                END(trap_low)

LEAF(kgdb_read_byte)
4:              lb      t0, (a0)
                sb      t0, (a1)
                li      v0, 0
                jr      ra
                .section __ex_table,"a"
                PTR     4b, kgdbfault
                .previous
                END(kgdb_read_byte)

LEAF(kgdb_write_byte)
5:              sb      a0, (a1)
                li      v0, 0
                jr      ra
                .section __ex_table,"a"
                PTR     5b, kgdbfault
                .previous
                END(kgdb_write_byte)

                .type   kgdbfault@function
                .ent    kgdbfault

kgdbfault:      li      v0, -EFAULT
                jr      ra
                .end    kgdbfault