Subversion Repositories or1k

/*
 *  arch/ppc/kernel/irq.c
 *
 *  Derived from arch/i386/kernel/irq.c
 *    Copyright (C) 1992 Linus Torvalds
 *  Adapted from arch/i386 by Gary Thomas
 *    Copyright (C) 1995-1996 Gary Thomas (gdt@linuxppc.org)
 *  Updated and modified by Cort Dougan <cort@fsmlabs.com>
 *    Copyright (C) 1996-2001 Cort Dougan
 *  Adapted for Power Macintosh by Paul Mackerras
 *    Copyright (C) 1996 Paul Mackerras (paulus@cs.anu.edu.au)
 *  Amiga/APUS changes by Jesper Skov (jskov@cygnus.co.uk).
 *
 * This file contains the code used by various IRQ handling routines:
 * asking for different IRQ's should be done through these routines
 * instead of just grabbing them. Thus setups with different IRQ numbers
 * shouldn't result in any weird surprises, and installing new handlers
 * should be easier.
 *
 * The MPC8xx has an interrupt mask in the SIU.  If a bit is set, the
 * interrupt is _enabled_.  As expected, IRQ0 is bit 0 in the 32-bit
 * mask register (of which only 16 are defined), hence the weird shifting
 * and compliment of the cached_irq_mask.  I want to be able to stuff
 * this right into the SIU SMASK register.
 * Many of the prep/chrp functions are conditional compiled on CONFIG_8xx
 * to reduce code space and undefined function references.
 */
 
 
#include <linux/ptrace.h>
#include <linux/errno.h>
#include <linux/threads.h>
#include <linux/kernel_stat.h>
#include <linux/signal.h>
#include <linux/sched.h>
#include <linux/ioport.h>
#include <linux/interrupt.h>
#include <linux/timex.h>
#include <linux/config.h>
#include <linux/init.h>
#include <linux/slab.h>
#include <linux/pci.h>
#include <linux/delay.h>
#include <linux/irq.h>
#include <linux/proc_fs.h>
#include <linux/random.h>
 
#include <asm/uaccess.h>
#include <asm/bitops.h>
#include <asm/system.h>
#include <asm/io.h>
#include <asm/pgtable.h>
#include <asm/irq.h>
#include <asm/cache.h>
#include <asm/prom.h>
#include <asm/ptrace.h>
 
#define NR_MASK_WORDS	((NR_IRQS + 31) / 32)
 
extern atomic_t ipi_recv;
extern atomic_t ipi_sent;
void enable_irq(unsigned int irq_nr);
void disable_irq(unsigned int irq_nr);
 
static void register_irq_proc (unsigned int irq);
 
#define MAXCOUNT 10000000
 
irq_desc_t irq_desc[NR_IRQS] __cacheline_aligned =
	{ [0 ... NR_IRQS-1] = { 0, NULL, NULL, 0, SPIN_LOCK_UNLOCKED}};
 
int ppc_spurious_interrupts = 0;
struct irqaction *ppc_irq_action[NR_IRQS];
unsigned long ppc_cached_irq_mask[NR_MASK_WORDS];
unsigned long ppc_lost_interrupts[NR_MASK_WORDS];
atomic_t ppc_n_lost_interrupts;
 
/* nasty hack for shared irq's since we need to do kmalloc calls but
 * can't very early in the boot when we need to do a request irq.
 * this needs to be removed.
 * -- Cort
 */
#define IRQ_KMALLOC_ENTRIES 8
static int cache_bitmask = 0;
static struct irqaction malloc_cache[IRQ_KMALLOC_ENTRIES];
extern int mem_init_done;
 
#if defined(CONFIG_TAU_INT)
extern int tau_interrupts(unsigned long cpu);
extern int tau_initialized;
#endif
 
void *irq_kmalloc(size_t size, int pri)
{
	unsigned int i;
	if ( mem_init_done )
		return kmalloc(size,pri);
	for ( i = 0; i < IRQ_KMALLOC_ENTRIES ; i++ )
		if ( ! ( cache_bitmask & (1<<i) ) )
		{
			cache_bitmask |= (1<<i);
			return (void *)(&malloc_cache[i]);
		}
	return 0;
}
 
void irq_kfree(void *ptr)
{
	unsigned int i;
	for ( i = 0 ; i < IRQ_KMALLOC_ENTRIES ; i++ )
		if ( ptr == &malloc_cache[i] )
		{
			cache_bitmask &= ~(1<<i);
			return;
		}
	kfree(ptr);
}
 
int
setup_irq(unsigned int irq, struct irqaction * new)
{
	int shared = 0;
	unsigned long flags;
	struct irqaction *old, **p;
	irq_desc_t *desc = irq_desc + irq;
 
	/*
	 * Some drivers like serial.c use request_irq() heavily,
	 * so we have to be careful not to interfere with a
	 * running system.
	 */
	if (new->flags & SA_SAMPLE_RANDOM) {
		/*
		 * This function might sleep, we want to call it first,
		 * outside of the atomic block.
		 * Yes, this might clear the entropy pool if the wrong
		 * driver is attempted to be loaded, without actually
		 * installing a new handler, but is this really a problem,
		 * only the sysadmin is able to do this.
		 */
		rand_initialize_irq(irq);
	}
 
	/*
	 * The following block of code has to be executed atomically
	 */
	spin_lock_irqsave(&desc->lock,flags);
	p = &desc->action;
	if ((old = *p) != NULL) {
		/* Can't share interrupts unless both agree to */
		if (!(old->flags & new->flags & SA_SHIRQ)) {
			spin_unlock_irqrestore(&desc->lock,flags);
			return -EBUSY;
		}
 
		/* add new interrupt at end of irq queue */
		do {
			p = &old->next;
			old = *p;
		} while (old);
		shared = 1;
	}
 
	*p = new;
 
	if (!shared) {
		desc->depth = 0;
		desc->status &= ~(IRQ_DISABLED | IRQ_AUTODETECT | IRQ_WAITING);
		unmask_irq(irq);
	}
	spin_unlock_irqrestore(&desc->lock,flags);
 
	register_irq_proc(irq);
	return 0;
}
 
void free_irq(unsigned int irq, void* dev_id)
{
	irq_desc_t *desc;
	struct irqaction **p;
	unsigned long flags;
 
	desc = irq_desc + irq;
	spin_lock_irqsave(&desc->lock,flags);
	p = &desc->action;
	for (;;) {
		struct irqaction * action = *p;
		if (action) {
			struct irqaction **pp = p;
			p = &action->next;
			if (action->dev_id != dev_id)
				continue;
 
			/* Found it - now remove it from the list of entries */
			*pp = action->next;
			if (!desc->action) {
				desc->status |= IRQ_DISABLED;
				mask_irq(irq);
			}
			spin_unlock_irqrestore(&desc->lock,flags);
 
#ifdef CONFIG_SMP
			/* Wait to make sure it's not being used on another CPU */
			while (desc->status & IRQ_INPROGRESS)
				barrier();
#endif
			irq_kfree(action);
			return;
		}
		printk("Trying to free free IRQ%d\n",irq);
		spin_unlock_irqrestore(&desc->lock,flags);
		break;
	}
	return;
}
 
int request_irq(unsigned int irq, void (*handler)(int, void *, struct pt_regs *),
	unsigned long irqflags, const char * devname, void *dev_id)
{
	struct irqaction *action;
	int retval;
 
	if (irq >= NR_IRQS)
		return -EINVAL;
	if (!handler)
	{
		/*
		 * free_irq() used to be implemented as a call to
		 * request_irq() with handler being NULL.  Now we have
		 * a real free_irq() but need to allow the old behavior
		 * for old code that hasn't caught up yet.
		 *  -- Cort <cort@fsmlabs.com>
		 */
		free_irq(irq, dev_id);
		return 0;
	}
 
	action = (struct irqaction *)
		irq_kmalloc(sizeof(struct irqaction), GFP_KERNEL);
	if (!action) {
		printk(KERN_ERR "irq_kmalloc() failed for irq %d !\n", irq);
		return -ENOMEM;
	}
 
	action->handler = handler;
	action->flags = irqflags;
	action->mask = 0;
	action->name = devname;
	action->dev_id = dev_id;
	action->next = NULL;
 
	retval = setup_irq(irq, action);
	if (retval)
	{
		kfree(action);
		return retval;
	}
 
	return 0;
}
 
/*
 * Generic enable/disable code: this just calls
 * down into the PIC-specific version for the actual
 * hardware disable after having gotten the irq
 * controller lock.
 */
 
/**
 *	disable_irq_nosync - disable an irq without waiting
 *	@irq: Interrupt to disable
 *
 *	Disable the selected interrupt line. Disables of an interrupt
 *	stack. Unlike disable_irq(), this function does not ensure existing
 *	instances of the IRQ handler have completed before returning.
 *
 *	This function may be called from IRQ context.
 */
 
 void disable_irq_nosync(unsigned int irq)
{
	irq_desc_t *desc = irq_desc + irq;
	unsigned long flags;
 
	spin_lock_irqsave(&desc->lock, flags);
	if (!desc->depth++) {
		if (!(desc->status & IRQ_PER_CPU))
			desc->status |= IRQ_DISABLED;
		mask_irq(irq);
	}
	spin_unlock_irqrestore(&desc->lock, flags);
}
 
/**
 *	disable_irq - disable an irq and wait for completion
 *	@irq: Interrupt to disable
 *
 *	Disable the selected interrupt line. Disables of an interrupt
 *	stack. That is for two disables you need two enables. This
 *	function waits for any pending IRQ handlers for this interrupt
 *	to complete before returning. If you use this function while
 *	holding a resource the IRQ handler may need you will deadlock.
 *
 *	This function may be called - with care - from IRQ context.
 */
 
void disable_irq(unsigned int irq)
{
	disable_irq_nosync(irq);
 
	if (!local_irq_count(smp_processor_id())) {
		do {
			barrier();
		} while (irq_desc[irq].status & IRQ_INPROGRESS);
	}
}
 
/**
 *	enable_irq - enable interrupt handling on an irq
 *	@irq: Interrupt to enable
 *
 *	Re-enables the processing of interrupts on this IRQ line
 *	providing no disable_irq calls are now in effect.
 *
 *	This function may be called from IRQ context.
 */
 
void enable_irq(unsigned int irq)
{
	irq_desc_t *desc = irq_desc + irq;
	unsigned long flags;
 
	spin_lock_irqsave(&desc->lock, flags);
	switch (desc->depth) {
	case 1: {
		unsigned int status = desc->status & ~IRQ_DISABLED;
		desc->status = status;
		if ((status & (IRQ_PENDING | IRQ_REPLAY)) == IRQ_PENDING) {
			desc->status = status | IRQ_REPLAY;
			hw_resend_irq(desc->handler,irq);
		}
		unmask_irq(irq);
		/* fall-through */
	}
	default:
		desc->depth--;
		break;
	case 0:
		printk("enable_irq(%u) unbalanced\n", irq);
	}
	spin_unlock_irqrestore(&desc->lock, flags);
}
 
int get_irq_list(char *buf)
{
	int i, len = 0, j;
	struct irqaction * action;
 
	len += sprintf(buf+len, "           ");
	for (j=0; j<smp_num_cpus; j++)
		len += sprintf(buf+len, "CPU%d       ",j);
	*(char *)(buf+len++) = '\n';
 
	for (i = 0 ; i < NR_IRQS ; i++) {
		action = irq_desc[i].action;
		if ( !action || !action->handler )
			continue;
		len += sprintf(buf+len, "%3d: ", i);
#ifdef CONFIG_SMP
		for (j = 0; j < smp_num_cpus; j++)
			len += sprintf(buf+len, "%10u ",
				kstat.irqs[cpu_logical_map(j)][i]);
#else
		len += sprintf(buf+len, "%10u ", kstat_irqs(i));
#endif /* CONFIG_SMP */
		if ( irq_desc[i].handler )
			len += sprintf(buf+len, " %s ", irq_desc[i].handler->typename );
		else
			len += sprintf(buf+len, "  None      ");
		len += sprintf(buf+len, "%s", (irq_desc[i].status & IRQ_LEVEL) ? "Level " : "Edge  ");
		len += sprintf(buf+len, "    %s",action->name);
		for (action=action->next; action; action = action->next) {
			len += sprintf(buf+len, ", %s", action->name);
		}
		len += sprintf(buf+len, "\n");
	}
#ifdef CONFIG_TAU_INT
	if (tau_initialized){
		len += sprintf(buf+len, "TAU: ");
		for (j = 0; j < smp_num_cpus; j++)
			len += sprintf(buf+len, "%10u ",
					tau_interrupts(j));
		len += sprintf(buf+len, "  PowerPC             Thermal Assist (cpu temp)\n");
	}
#endif
#ifdef CONFIG_SMP
	/* should this be per processor send/receive? */
	len += sprintf(buf+len, "IPI (recv/sent): %10u/%u\n",
		       atomic_read(&ipi_recv), atomic_read(&ipi_sent));
#endif
	len += sprintf(buf+len, "BAD: %10u\n", ppc_spurious_interrupts);
	return len;
}
 
static inline void
handle_irq_event(int irq, struct pt_regs *regs, struct irqaction *action)
{
	int status = 0;
 
	if (!(action->flags & SA_INTERRUPT))
		__sti();
 
	do {
		status |= action->flags;
		action->handler(irq, action->dev_id, regs);
		action = action->next;
	} while (action);
	if (status & SA_SAMPLE_RANDOM)
		add_interrupt_randomness(irq);
	__cli();
}
 
/*
 * Eventually, this should take an array of interrupts and an array size
 * so it can dispatch multiple interrupts.
 */
void ppc_irq_dispatch_handler(struct pt_regs *regs, int irq)
{
	int status;
	struct irqaction *action;
	int cpu = smp_processor_id();
	irq_desc_t *desc = &irq_desc[irq];
 
	kstat.irqs[cpu][irq]++;
	spin_lock(&desc->lock);
	ack_irq(irq);
	/*
	   REPLAY is when Linux resends an IRQ that was dropped earlier
	   WAITING is used by probe to mark irqs that are being tested
	   */
	status = desc->status & ~(IRQ_REPLAY | IRQ_WAITING);
	if (!(status & IRQ_PER_CPU))
		status |= IRQ_PENDING; /* we _want_ to handle it */
 
	/*
	 * If the IRQ is disabled for whatever reason, we cannot
	 * use the action we have.
	 */
	action = NULL;
	if (!(status & (IRQ_DISABLED | IRQ_INPROGRESS))) {
		action = desc->action;
		if (!action || !action->handler) {
			ppc_spurious_interrupts++;
			printk(KERN_DEBUG "Unhandled interrupt %x, disabled\n", irq);
			/* We can't call disable_irq here, it would deadlock */
			++desc->depth;
			desc->status |= IRQ_DISABLED;
			mask_irq(irq);
			/* This is a real interrupt, we have to eoi it,
			   so we jump to out */
			goto out;
		}
		status &= ~IRQ_PENDING; /* we commit to handling */
		if (!(status & IRQ_PER_CPU))
			status |= IRQ_INPROGRESS; /* we are handling it */
	}
	desc->status = status;
 
	/*
	 * If there is no IRQ handler or it was disabled, exit early.
	   Since we set PENDING, if another processor is handling
	   a different instance of this same irq, the other processor
	   will take care of it.
	 */
	if (!action)
		goto out;
 
 
	/*
	 * Edge triggered interrupts need to remember
	 * pending events.
	 * This applies to any hw interrupts that allow a second
	 * instance of the same irq to arrive while we are in do_IRQ
	 * or in the handler. But the code here only handles the _second_
	 * instance of the irq, not the third or fourth. So it is mostly
	 * useful for irq hardware that does not mask cleanly in an
	 * SMP environment.
	 */
	for (;;) {
		spin_unlock(&desc->lock);
		handle_irq_event(irq, regs, action);
		spin_lock(&desc->lock);
 
		if (!(desc->status & IRQ_PENDING))
			break;
		desc->status &= ~IRQ_PENDING;
	}
	desc->status &= ~IRQ_INPROGRESS;
out:
	/*
	 * The ->end() handler has to deal with interrupts which got
	 * disabled while the handler was running.
	 */
	if (desc->handler) {
		if (desc->handler->end)
			desc->handler->end(irq);
		else if (desc->handler->enable)
			desc->handler->enable(irq);
	}
 
#ifdef CONFIG_DBOX2
	/*
	 * Interrupts marked as oneshot are level
	 * triggered. We disable them here for onboard
	 * hardware which can not be configured to
	 * generate edge triggered interrupts due to
	 * lack of documentation.
	 */
	if ((action) && (action->flags & SA_ONESHOT))
		disable_irq_nosync(irq);
#endif
 
	spin_unlock(&desc->lock);
}
 
int do_IRQ(struct pt_regs *regs)
{
	int cpu = smp_processor_id();
	int irq, first = 1;
        hardirq_enter( cpu );
 
	/*
	 * Every platform is required to implement ppc_md.get_irq.
	 * This function will either return an irq number or -1 to
	 * indicate there are no more pending.  But the first time
	 * through the loop this means there wasn't an IRQ pending.
	 * The value -2 is for buggy hardware and means that this IRQ
	 * has already been handled. -- Tom
	 */
	while ((irq = ppc_md.get_irq(regs)) >= 0) {
		ppc_irq_dispatch_handler(regs, irq);
		first = 0;
	}
	if (irq != -2 && first)
		/* That's not SMP safe ... but who cares ? */
		ppc_spurious_interrupts++;
        hardirq_exit( cpu );
 
	if (softirq_pending(cpu))
		do_softirq();
	return 1; /* lets ret_from_int know we can do checks */
}
 
unsigned long probe_irq_on (void)
{
	return 0;
}
 
int probe_irq_off (unsigned long irqs)
{
	return 0;
}
 
unsigned int probe_irq_mask(unsigned long irqs)
{
	return 0;
}
 
void __init init_IRQ(void)
{
	static int once = 0;
 
	if ( once )
		return;
	else
		once++;
 
	ppc_md.init_IRQ();
}
 
#ifdef CONFIG_SMP
unsigned char global_irq_holder = NO_PROC_ID;
unsigned volatile long global_irq_lock; /* pendantic :long for set_bit--RR*/
atomic_t global_irq_count;
 
atomic_t global_bh_count;
 
static void show(char * str)
{
	int i;
	unsigned long *stack;
	int cpu = smp_processor_id();
 
	printk("\n%s, CPU %d:\n", str, cpu);
	printk("irq:  %d [%d %d]\n",
	       atomic_read(&global_irq_count),
	       local_irq_count(0),
	       local_irq_count(1));
	printk("bh:   %d [%d %d]\n",
	       atomic_read(&global_bh_count),
	       local_bh_count(0),
	       local_bh_count(1));
	stack = (unsigned long *) &str;
	for (i = 40; i ; i--) {
		unsigned long x = *++stack;
		if (x > (unsigned long) &init_task_union && x < (unsigned long) &vsprintf) {
			printk("<[%08lx]> ", x);
		}
	}
}
 
static inline void wait_on_bh(void)
{
	int count = MAXCOUNT;
	do {
		if (!--count) {
			show("wait_on_bh");
			count = ~0;
		}
		/* nothing .. wait for the other bh's to go away */
	} while (atomic_read(&global_bh_count) != 0);
}
 
 
static inline void wait_on_irq(int cpu)
{
	int count = MAXCOUNT;
 
	for (;;) {
 
		/*
		 * Wait until all interrupts are gone. Wait
		 * for bottom half handlers unless we're
		 * already executing in one..
		 */
		if (!atomic_read(&global_irq_count)) {
			if (local_bh_count(cpu)
			    || !atomic_read(&global_bh_count))
				break;
		}
 
		/* Duh, we have to loop. Release the lock to avoid deadlocks */
		clear_bit(0,&global_irq_lock);
 
		for (;;) {
			if (!--count) {
				show("wait_on_irq");
				count = ~0;
			}
			__sti();
			/* don't worry about the lock race Linus found
			 * on intel here. -- Cort
			 */
			__cli();
			if (atomic_read(&global_irq_count))
				continue;
			if (global_irq_lock)
				continue;
			if (!local_bh_count(cpu)
			    && atomic_read(&global_bh_count))
				continue;
			if (!test_and_set_bit(0,&global_irq_lock))
				break;
		}
	}
}
 
/*
 * This is called when we want to synchronize with
 * bottom half handlers. We need to wait until
 * no other CPU is executing any bottom half handler.
 *
 * Don't wait if we're already running in an interrupt
 * context or are inside a bh handler.
 */
void synchronize_bh(void)
{
	if (atomic_read(&global_bh_count) && !in_interrupt())
		wait_on_bh();
}
 
/*
 * This is called when we want to synchronize with
 * interrupts. We may for example tell a device to
 * stop sending interrupts: but to make sure there
 * are no interrupts that are executing on another
 * CPU we need to call this function.
 */
void synchronize_irq(void)
{
	if (atomic_read(&global_irq_count)) {
		/* Stupid approach */
		cli();
		sti();
	}
}
 
static inline void get_irqlock(int cpu)
{
	unsigned int loops = MAXCOUNT;
 
	if (test_and_set_bit(0,&global_irq_lock)) {
		/* do we already hold the lock? */
		if ((unsigned char) cpu == global_irq_holder)
			return;
		/* Uhhuh.. Somebody else got it. Wait.. */
		do {
			do {
				if (loops-- == 0) {
					printk("get_irqlock(%d) waiting, global_irq_holder=%d\n", cpu, global_irq_holder);
#ifdef CONFIG_XMON
					xmon(0);
#endif
				}
			} while (test_bit(0,&global_irq_lock));
		} while (test_and_set_bit(0,&global_irq_lock));
	}
	/*
	 * We also need to make sure that nobody else is running
	 * in an interrupt context.
	 */
	wait_on_irq(cpu);
 
	/*
	 * Ok, finally..
	 */
	global_irq_holder = cpu;
}
 
/*
 * A global "cli()" while in an interrupt context
 * turns into just a local cli(). Interrupts
 * should use spinlocks for the (very unlikely)
 * case that they ever want to protect against
 * each other.
 *
 * If we already have local interrupts disabled,
 * this will not turn a local disable into a
 * global one (problems with spinlocks: this makes
 * save_flags+cli+sti usable inside a spinlock).
 */
void __global_cli(void)
{
	unsigned long flags;
 
	__save_flags(flags);
	if (flags & (1 << 15)) {
		int cpu = smp_processor_id();
		__cli();
		if (!local_irq_count(cpu))
			get_irqlock(cpu);
	}
}
 
void __global_sti(void)
{
	int cpu = smp_processor_id();
 
	if (!local_irq_count(cpu))
		release_irqlock(cpu);
	__sti();
}
 
/*
 * SMP flags value to restore to:
 * 0 - global cli
 * 1 - global sti
 * 2 - local cli
 * 3 - local sti
 */
unsigned long __global_save_flags(void)
{
	int retval;
	int local_enabled;
	unsigned long flags;
 
	__save_flags(flags);
	local_enabled = (flags >> 15) & 1;
	/* default to local */
	retval = 2 + local_enabled;
 
	/* check for global flags if we're not in an interrupt */
	if (!local_irq_count(smp_processor_id())) {
		if (local_enabled)
			retval = 1;
		if (global_irq_holder == (unsigned char) smp_processor_id())
			retval = 0;
	}
	return retval;
}
 
int
tb(long vals[],
   int  max_size)
{
   register unsigned long *orig_sp __asm__ ("r1");
   register unsigned long lr __asm__ ("r3");
   unsigned long *sp;
   int i;
 
   asm volatile ("mflr 3");
   vals[0] = lr;
   sp = (unsigned long *) *orig_sp;
   sp = (unsigned long *) *sp;
   for (i=1; i<max_size; i++) {
      if (sp == 0) {
         break;
      }
 
      vals[i] = *(sp+1);
      sp = (unsigned long *) *sp;
   }
 
   return i;
}
 
void __global_restore_flags(unsigned long flags)
{
	switch (flags) {
	case 0:
		__global_cli();
		break;
	case 1:
		__global_sti();
		break;
	case 2:
		__cli();
		break;
	case 3:
		__sti();
		break;
	default:
	{
		unsigned long trace[5];
                int           count;
                int           i;
 
		printk("global_restore_flags: %08lx (%08lx)\n",
			flags, (&flags)[-1]);
                count = tb(trace, 5);
                printk("tb:");
                for(i=0; i<count; i++) {
			printk(" %8.8lx", trace[i]);
		}
		printk("\n");
	}
	}
}
#endif /* CONFIG_SMP */
 
static struct proc_dir_entry *root_irq_dir;
static struct proc_dir_entry *irq_dir[NR_IRQS];
static struct proc_dir_entry *smp_affinity_entry[NR_IRQS];
 
#ifdef CONFIG_IRQ_ALL_CPUS
#define DEFAULT_CPU_AFFINITY 0xffffffff
#else
#define DEFAULT_CPU_AFFINITY 0x00000001
#endif
 
unsigned int irq_affinity [NR_IRQS] =
	{ [0 ... NR_IRQS-1] = DEFAULT_CPU_AFFINITY };
 
#define HEX_DIGITS 8
 
static int irq_affinity_read_proc (char *page, char **start, off_t off,
			int count, int *eof, void *data)
{
	if (count < HEX_DIGITS+1)
		return -EINVAL;
	return sprintf (page, "%08x\n", irq_affinity[(int)data]);
}
 
static unsigned int parse_hex_value (const char *buffer,
		unsigned long count, unsigned long *ret)
{
	unsigned char hexnum [HEX_DIGITS];
	unsigned long value;
	int i;
 
	if (!count)
		return -EINVAL;
	if (count > HEX_DIGITS)
		count = HEX_DIGITS;
	if (copy_from_user(hexnum, buffer, count))
		return -EFAULT;
 
	/*
	 * Parse the first 8 characters as a hex string, any non-hex char
	 * is end-of-string. '00e1', 'e1', '00E1', 'E1' are all the same.
	 */
	value = 0;
 
	for (i = 0; i < count; i++) {
		unsigned int c = hexnum[i];
 
		switch (c) {
			case '0' ... '9': c -= '0'; break;
			case 'a' ... 'f': c -= 'a'-10; break;
			case 'A' ... 'F': c -= 'A'-10; break;
		default:
			goto out;
		}
		value = (value << 4) | c;
	}
out:
	*ret = value;
	return 0;
}
 
static int irq_affinity_write_proc (struct file *file, const char *buffer,
					unsigned long count, void *data)
{
	int irq = (int) data, full_count = count, err;
	unsigned long new_value;
 
	if (!irq_desc[irq].handler->set_affinity)
		return -EIO;
 
	err = parse_hex_value(buffer, count, &new_value);
 
	/*
	 * Do not allow disabling IRQs completely - it's a too easy
	 * way to make the system unusable accidentally :-) At least
	 * one online CPU still has to be targeted.
	 *
	 * We assume a 1-1 logical<->physical cpu mapping here.  If
	 * we assume that the cpu indices in /proc/irq/../smp_affinity
	 * are actually logical cpu #'s then we have no problem.
	 *  -- Cort <cort@fsmlabs.com>
	 */
	if (!(new_value & cpu_online_map))
		return -EINVAL;
 
	irq_affinity[irq] = new_value;
	irq_desc[irq].handler->set_affinity(irq, new_value);
 
	return full_count;
}
 
static int prof_cpu_mask_read_proc (char *page, char **start, off_t off,
			int count, int *eof, void *data)
{
	unsigned long *mask = (unsigned long *) data;
	if (count < HEX_DIGITS+1)
		return -EINVAL;
	return sprintf (page, "%08lx\n", *mask);
}
 
static int prof_cpu_mask_write_proc (struct file *file, const char *buffer,
					unsigned long count, void *data)
{
	unsigned long *mask = (unsigned long *) data, full_count = count, err;
	unsigned long new_value;
 
	err = parse_hex_value(buffer, count, &new_value);
	if (err)
		return err;
 
	*mask = new_value;
	return full_count;
}
 
#define MAX_NAMELEN 10
 
static void register_irq_proc (unsigned int irq)
{
	struct proc_dir_entry *entry;
	char name [MAX_NAMELEN];
 
	if (!root_irq_dir || (irq_desc[irq].handler == NULL) || irq_dir[irq])
		return;
 
	memset(name, 0, MAX_NAMELEN);
	sprintf(name, "%d", irq);
 
	/* create /proc/irq/1234 */
	irq_dir[irq] = proc_mkdir(name, root_irq_dir);
 
	/* create /proc/irq/1234/smp_affinity */
	entry = create_proc_entry("smp_affinity", 0600, irq_dir[irq]);
 
	entry->nlink = 1;
	entry->data = (void *)irq;
	entry->read_proc = irq_affinity_read_proc;
	entry->write_proc = irq_affinity_write_proc;
 
	smp_affinity_entry[irq] = entry;
}
 
unsigned long prof_cpu_mask = -1;
 
void init_irq_proc (void)
{
	struct proc_dir_entry *entry;
	int i;
 
	/* create /proc/irq */
	root_irq_dir = proc_mkdir("irq", 0);
 
	/* create /proc/irq/prof_cpu_mask */
	entry = create_proc_entry("prof_cpu_mask", 0600, root_irq_dir);
 
	entry->nlink = 1;
	entry->data = (void *)&prof_cpu_mask;
	entry->read_proc = prof_cpu_mask_read_proc;
	entry->write_proc = prof_cpu_mask_write_proc;
 
	/*
	 * Create entries for all existing IRQs.
	 */
	for (i = 0; i < NR_IRQS; i++) {
		if (irq_desc[i].handler == NULL)
			continue;
		register_irq_proc(i);
	}
}
 
void no_action(int irq, void *dev, struct pt_regs *regs)
{
}