URL
https://opencores.org/ocsvn/or1k/or1k/trunk
Subversion Repositories or1k
[/] [or1k/] [trunk/] [linux/] [linux-2.4/] [arch/] [sh/] [kernel/] [Makefile] - Rev 1765
Compare with Previous | Blame | View Log
#
# Makefile for the Linux/SuperH kernel.
#
# Note! Dependencies are done automagically by 'make dep', which also
# removes any old dependencies. DON'T put your own dependencies here
# unless it's something special (ie not a .c file).
#
all: kernel.o head.o init_task.o
clean:
O_TARGET := kernel.o
export-objs := io.o io_generic.o io_hd64461.o setup_hd64461.o sh_ksyms.o \
dma.o
obj-y := process.o signal.o entry.o traps.o irq.o irq_ipr.o \
ptrace.o setup.o time.o sys_sh.o semaphore.o \
irq_imask.o io.o io_generic.o sh_ksyms.o ubc.o
obj-$(CONFIG_CF_ENABLER) += cf-enabler.o
obj-$(CONFIG_CPU_SH4) += fpu.o
obj-$(CONFIG_SH_RTC) += rtc.o
obj-$(CONFIG_SH_DMA) += dma.o
obj-$(CONFIG_SH_STANDARD_BIOS) += sh_bios.o
obj-$(CONFIG_SH_KGDB) += kgdb_stub.o kgdb_jmp.o
ifeq ($(CONFIG_PCI),y)
ifeq ($(CONFIG_SH_DREAMCAST),y)
obj-y += pci-dc.o pcibios.o
else
obj-y += pci-dma.o pcibios.o
obj-$(CONFIG_CPU_SUBTYPE_ST40)+= pci_st40.o
obj-$(CONFIG_CPU_SUBTYPE_SH7751)+= pci-sh7751.o
obj-$(CONFIG_SH_BIGSUR)+= pci-bigsur.o
obj-$(CONFIG_SH_7751_SOLUTION_ENGINE)+= pci-7751se.o
obj-$(CONFIG_PCI_SD0001)+= pci-sd0001.o
obj-$(CONFIG_SH_SECUREEDGE5410) += pci-snapgear.o
obj-$(CONFIG_SH_KEYWEST) += pci-v320usc.o
endif
endif
obj-$(CONFIG_SH_HP600) += mach_hp600.o
machine-specific-objs += mach_hp600.o
obj-$(CONFIG_SH_HS7729PCI) += mach_hs7729pci.o setup_hs7729pci.o io_hs7729pci.o
machine-specific-objs += mach_hs7729pci.o setup_hs7729pci.o io_hs7729pci.o
obj-$(CONFIG_SH_SOLUTION_ENGINE)+= mach_se.o setup_se.o io_se.o led_se.o
machine-specific-objs += mach_se.o setup_se.o io_se.o led_se.o
obj-$(CONFIG_SH_7751_SOLUTION_ENGINE)+= mach_7751se.o setup_7751se.o \
io_7751se.o led_se.o
machine-specific-objs += mach_7751se.o 7751setup_se.o \
io_7751se.o led_se.o pci-7751se.o
obj-$(CONFIG_SH_MOBILE_SOLUTION_ENGINE)+= mach_shmse.o setup_shmse.o \
io_shmse.o led_se.o
machine-specific-objs += mach_shmse.o setup_shmse.o \
io_shmse.o led_se.o
obj-$(CONFIG_SH_BIGSUR) += mach_bigsur.o setup_bigsur.o io_bigsur.o led_bigsur.o
machine-specific-objs += mach_bigsur.o setup_bigsur.o io_bigsur.o led_bigsur.o
obj-$(CONFIG_SH_SH2000) += setup_sh2000.o io_sh2000.o
machine-specific-objs += setup_sh2000.o io_sh2000.o
obj-$(CONFIG_SH_CAT68701) += mach_cat68701.o io_cat68701.o
machine-specific-objs += mach_cat68701.o io_cat68701.o
obj-$(CONFIG_SH_CQREEK) += setup_cqreek.o
machine-specific-objs += setup_cqreek.o
obj-$(CONFIG_SH_UNKNOWN) += mach_unknown.o io_unknown.o
machine-specific-objs += mach_unknown.o io_unknown.o
obj-$(CONFIG_HD64461) += setup_hd64461.o io_hd64461.o
machine-specific-objs += setup_hd64461.o io_hd64461.o
obj-$(CONFIG_CPU_SUBTYPE_ST40) +=irq_intc2.o
obj-$(CONFIG_SH_ADX) += mach_adx.o setup_adx.o io_adx.o irq_maskreg.o
machine-specific-objs += mach_adx.o setup_adx.o io_adx.o irq_maskreg.o
obj-$(CONFIG_SH_SECUREEDGE5410) += mach_snapgear.o setup_snapgear.o io_snapgear.o
machine-specific-objs += mach_snapgear.o setup_snapgear.o io_snapgear.o
ifeq ($(CONFIG_RTC),y)
obj-$(CONFIG_SH_SECUREEDGE5410) += rtc-snapgear.o
machine-specific-objs += rtc-snapgear.o
endif
obj-$(CONFIG_SH_KEYWEST) += mach_keywest.o setup_keywest.o io_keywest.o
machine-specific-objs += mach_keywest.o setup_keywest.o io_keywest.o
obj-$(CONFIG_SH_SH4202_MICRODEV)+= mach_microdev.o setup_microdev.o io_microdev.o irq_microdev.o
machine-specific-objs += mach_microdev.o setup_microdev.o io_microdev.o irq_microdev.o
# Doesn't compile well, so don't include in machine-specific-objs
obj-$(CONFIG_HD64465) += setup_hd64465.o io_hd64465.o hd64465_gpio.o
obj-$(CONFIG_SH_DMIDA) += mach_dmida.o
obj-$(CONFIG_SH_EC3104) += setup_ec3104.o io_ec3104.o mach_ec3104.o
obj-$(CONFIG_SH_DREAMCAST) += mach_dc.o setup_dc.o io_dc.o rtc-aica.o
ifeq ($(CONFIG_SH_GENERIC),y)
obj-y += $(machine-specific-objs)
endif
USE_STANDARD_AS_RULE := true
include $(TOPDIR)/Rules.make