Subversion Repositories or1k

/*******************************************************************************
 *
 * Module Name: dsutils - Dispatcher utilities
 *
 ******************************************************************************/
 
/*
 * Copyright (C) 2000 - 2004, R. Byron Moore
 * All rights reserved.
 *
 * Redistribution and use in source and binary forms, with or without
 * modification, are permitted provided that the following conditions
 * are met:
 * 1. Redistributions of source code must retain the above copyright
 *    notice, this list of conditions, and the following disclaimer,
 *    without modification.
 * 2. Redistributions in binary form must reproduce at minimum a disclaimer
 *    substantially similar to the "NO WARRANTY" disclaimer below
 *    ("Disclaimer") and any redistribution must be conditioned upon
 *    including a substantially similar Disclaimer requirement for further
 *    binary redistribution.
 * 3. Neither the names of the above-listed copyright holders nor the names
 *    of any contributors may be used to endorse or promote products derived
 *    from this software without specific prior written permission.
 *
 * Alternatively, this software may be distributed under the terms of the
 * GNU General Public License ("GPL") version 2 as published by the Free
 * Software Foundation.
 *
 * NO WARRANTY
 * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
 * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
 * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR
 * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
 * HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
 * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
 * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING
 * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
 * POSSIBILITY OF SUCH DAMAGES.
 */
 
 
#include <acpi/acpi.h>
#include <acpi/acparser.h>
#include <acpi/amlcode.h>
#include <acpi/acdispat.h>
#include <acpi/acinterp.h>
#include <acpi/acnamesp.h>
#include <acpi/acdebug.h>
 
#define _COMPONENT          ACPI_DISPATCHER
	 ACPI_MODULE_NAME    ("dsutils")
 
 
#ifndef ACPI_NO_METHOD_EXECUTION
 
/*******************************************************************************
 *
 * FUNCTION:    acpi_ds_is_result_used
 *
 * PARAMETERS:  Op
 *              result_obj
 *              walk_state
 *
 * RETURN:      Status
 *
 * DESCRIPTION: Check if a result object will be used by the parent
 *
 ******************************************************************************/
 
u8
acpi_ds_is_result_used (
	union acpi_parse_object         *op,
	struct acpi_walk_state          *walk_state)
{
	const struct acpi_opcode_info   *parent_info;
 
 
	ACPI_FUNCTION_TRACE_PTR ("ds_is_result_used", op);
 
 
	/* Must have both an Op and a Result Object */
 
	if (!op) {
		ACPI_DEBUG_PRINT ((ACPI_DB_ERROR, "Null Op\n"));
		return_VALUE (TRUE);
	}
 
	/*
	 * If there is no parent, the result can't possibly be used!
	 * (An executing method typically has no parent, since each
	 * method is parsed separately)  However, a method that is
	 * invoked from another method has a parent.
	 */
	if (!op->common.parent) {
		return_VALUE (FALSE);
	}
 
	/*
	 * Get info on the parent.  The root Op is AML_SCOPE
	 */
	parent_info = acpi_ps_get_opcode_info (op->common.parent->common.aml_opcode);
	if (parent_info->class == AML_CLASS_UNKNOWN) {
		ACPI_DEBUG_PRINT ((ACPI_DB_ERROR, "Unknown parent opcode. Op=%p\n", op));
		return_VALUE (FALSE);
	}
 
	/*
	 * Decide what to do with the result based on the parent.  If
	 * the parent opcode will not use the result, delete the object.
	 * Otherwise leave it as is, it will be deleted when it is used
	 * as an operand later.
	 */
	switch (parent_info->class) {
	case AML_CLASS_CONTROL:
 
		switch (op->common.parent->common.aml_opcode) {
		case AML_RETURN_OP:
 
			/* Never delete the return value associated with a return opcode */
 
			goto result_used;
 
		case AML_IF_OP:
		case AML_WHILE_OP:
 
			/*
			 * If we are executing the predicate AND this is the predicate op,
			 * we will use the return value
			 */
			if ((walk_state->control_state->common.state == ACPI_CONTROL_PREDICATE_EXECUTING) &&
				(walk_state->control_state->control.predicate_op == op)) {
				goto result_used;
			}
			break;
 
		default:
			/* Ignore other control opcodes */
			break;
		}
 
		/* The general control opcode returns no result */
 
		goto result_not_used;
 
 
	case AML_CLASS_CREATE:
 
		/*
		 * These opcodes allow term_arg(s) as operands and therefore
		 * the operands can be method calls.  The result is used.
		 */
		goto result_used;
 
 
	case AML_CLASS_NAMED_OBJECT:
 
		if ((op->common.parent->common.aml_opcode == AML_REGION_OP)      ||
			(op->common.parent->common.aml_opcode == AML_DATA_REGION_OP) ||
			(op->common.parent->common.aml_opcode == AML_PACKAGE_OP)     ||
			(op->common.parent->common.aml_opcode == AML_VAR_PACKAGE_OP) ||
			(op->common.parent->common.aml_opcode == AML_BUFFER_OP)      ||
			(op->common.parent->common.aml_opcode == AML_INT_EVAL_SUBTREE_OP)) {
			/*
			 * These opcodes allow term_arg(s) as operands and therefore
			 * the operands can be method calls.  The result is used.
			 */
			goto result_used;
		}
 
		goto result_not_used;
 
 
	default:
 
		/*
		 * In all other cases. the parent will actually use the return
		 * object, so keep it.
		 */
		goto result_used;
	}
 
 
result_used:
	ACPI_DEBUG_PRINT ((ACPI_DB_DISPATCH, "Result of [%s] used by Parent [%s] Op=%p\n",
			acpi_ps_get_opcode_name (op->common.aml_opcode),
			acpi_ps_get_opcode_name (op->common.parent->common.aml_opcode), op));
 
	return_VALUE (TRUE);
 
 
result_not_used:
	ACPI_DEBUG_PRINT ((ACPI_DB_DISPATCH, "Result of [%s] not used by Parent [%s] Op=%p\n",
			acpi_ps_get_opcode_name (op->common.aml_opcode),
			acpi_ps_get_opcode_name (op->common.parent->common.aml_opcode), op));
 
	return_VALUE (FALSE);
}
 
 
/*******************************************************************************
 *
 * FUNCTION:    acpi_ds_delete_result_if_not_used
 *
 * PARAMETERS:  Op
 *              result_obj
 *              walk_state
 *
 * RETURN:      Status
 *
 * DESCRIPTION: Used after interpretation of an opcode.  If there is an internal
 *              result descriptor, check if the parent opcode will actually use
 *              this result.  If not, delete the result now so that it will
 *              not become orphaned.
 *
 ******************************************************************************/
 
void
acpi_ds_delete_result_if_not_used (
	union acpi_parse_object         *op,
	union acpi_operand_object       *result_obj,
	struct acpi_walk_state          *walk_state)
{
	union acpi_operand_object       *obj_desc;
	acpi_status                     status;
 
 
	ACPI_FUNCTION_TRACE_PTR ("ds_delete_result_if_not_used", result_obj);
 
 
	if (!op) {
		ACPI_DEBUG_PRINT ((ACPI_DB_ERROR, "Null Op\n"));
		return_VOID;
	}
 
	if (!result_obj) {
		return_VOID;
	}
 
	if (!acpi_ds_is_result_used (op, walk_state)) {
		/*
		 * Must pop the result stack (obj_desc should be equal to result_obj)
		 */
		status = acpi_ds_result_pop (&obj_desc, walk_state);
		if (ACPI_SUCCESS (status)) {
			acpi_ut_remove_reference (result_obj);
		}
	}
 
	return_VOID;
}
 
 
/*******************************************************************************
 *
 * FUNCTION:    acpi_ds_resolve_operands
 *
 * PARAMETERS:  walk_state          - Current walk state with operands on stack
 *
 * RETURN:      Status
 *
 * DESCRIPTION: Resolve all operands to their values.  Used to prepare
 *              arguments to a control method invocation (a call from one
 *              method to another.)
 *
 ******************************************************************************/
 
acpi_status
acpi_ds_resolve_operands (
	struct acpi_walk_state          *walk_state)
{
	u32                             i;
	acpi_status                     status = AE_OK;
 
 
	ACPI_FUNCTION_TRACE_PTR ("ds_resolve_operands", walk_state);
 
 
	/*
	 * Attempt to resolve each of the valid operands
	 * Method arguments are passed by reference, not by value.  This means
	 * that the actual objects are passed, not copies of the objects.
	 */
	for (i = 0; i < walk_state->num_operands; i++) {
		status = acpi_ex_resolve_to_value (&walk_state->operands[i], walk_state);
		if (ACPI_FAILURE (status)) {
			break;
		}
	}
 
	return_ACPI_STATUS (status);
}
 
 
/*******************************************************************************
 *
 * FUNCTION:    acpi_ds_clear_operands
 *
 * PARAMETERS:  walk_state          - Current walk state with operands on stack
 *
 * RETURN:      None
 *
 * DESCRIPTION: Clear all operands on the current walk state operand stack.
 *
 ******************************************************************************/
 
void
acpi_ds_clear_operands (
	struct acpi_walk_state          *walk_state)
{
	u32                             i;
 
 
	ACPI_FUNCTION_TRACE_PTR ("acpi_ds_clear_operands", walk_state);
 
 
	/*
	 * Remove a reference on each operand on the stack
	 */
	for (i = 0; i < walk_state->num_operands; i++) {
		/*
		 * Remove a reference to all operands, including both
		 * "Arguments" and "Targets".
		 */
		acpi_ut_remove_reference (walk_state->operands[i]);
		walk_state->operands[i] = NULL;
	}
 
	walk_state->num_operands = 0;
	return_VOID;
}
#endif
 
 
/*******************************************************************************
 *
 * FUNCTION:    acpi_ds_create_operand
 *
 * PARAMETERS:  walk_state
 *              Arg
 *
 * RETURN:      Status
 *
 * DESCRIPTION: Translate a parse tree object that is an argument to an AML
 *              opcode to the equivalent interpreter object.  This may include
 *              looking up a name or entering a new name into the internal
 *              namespace.
 *
 ******************************************************************************/
 
acpi_status
acpi_ds_create_operand (
	struct acpi_walk_state          *walk_state,
	union acpi_parse_object         *arg,
	u32                             arg_index)
{
	acpi_status                     status = AE_OK;
	char                            *name_string;
	u32                             name_length;
	union acpi_operand_object       *obj_desc;
	union acpi_parse_object         *parent_op;
	u16                             opcode;
	acpi_interpreter_mode           interpreter_mode;
	const struct acpi_opcode_info   *op_info;
 
 
	ACPI_FUNCTION_TRACE_PTR ("ds_create_operand", arg);
 
 
	/* A valid name must be looked up in the namespace */
 
	if ((arg->common.aml_opcode == AML_INT_NAMEPATH_OP) &&
		(arg->common.value.string)) {
		ACPI_DEBUG_PRINT ((ACPI_DB_DISPATCH, "Getting a name: Arg=%p\n", arg));
 
		/* Get the entire name string from the AML stream */
 
		status = acpi_ex_get_name_string (ACPI_TYPE_ANY, arg->common.value.buffer,
				  &name_string, &name_length);
 
		if (ACPI_FAILURE (status)) {
			return_ACPI_STATUS (status);
		}
 
		/*
		 * All prefixes have been handled, and the name is
		 * in name_string
		 */
 
 
		/*
		 * Special handling for buffer_field declarations. This is a deferred
		 * opcode that unfortunately defines the field name as the last
		 * parameter instead of the first.  We get here when we are performing
		 * the deferred execution, so the actual name of the field is already
		 * in the namespace.  We don't want to attempt to look it up again
		 * because we may be executing in a different scope than where the
		 * actual opcode exists.
		 */
		if ((walk_state->deferred_node) &&
			(walk_state->deferred_node->type == ACPI_TYPE_BUFFER_FIELD) &&
			(arg_index != 0)) {
			obj_desc = ACPI_CAST_PTR (union acpi_operand_object, walk_state->deferred_node);
			status = AE_OK;
		}
		else    /* All other opcodes */ {
			/*
			 * Differentiate between a namespace "create" operation
			 * versus a "lookup" operation (IMODE_LOAD_PASS2 vs.
			 * IMODE_EXECUTE) in order to support the creation of
			 * namespace objects during the execution of control methods.
			 */
			parent_op = arg->common.parent;
			op_info = acpi_ps_get_opcode_info (parent_op->common.aml_opcode);
			if ((op_info->flags & AML_NSNODE) &&
				(parent_op->common.aml_opcode != AML_INT_METHODCALL_OP) &&
				(parent_op->common.aml_opcode != AML_REGION_OP) &&
				(parent_op->common.aml_opcode != AML_INT_NAMEPATH_OP)) {
				/* Enter name into namespace if not found */
 
				interpreter_mode = ACPI_IMODE_LOAD_PASS2;
			}
			else {
				/* Return a failure if name not found */
 
				interpreter_mode = ACPI_IMODE_EXECUTE;
			}
 
			status = acpi_ns_lookup (walk_state->scope_info, name_string,
					 ACPI_TYPE_ANY, interpreter_mode,
					 ACPI_NS_SEARCH_PARENT | ACPI_NS_DONT_OPEN_SCOPE,
					 walk_state,
					 ACPI_CAST_INDIRECT_PTR (struct acpi_namespace_node, &obj_desc));
			/*
			 * The only case where we pass through (ignore) a NOT_FOUND
			 * error is for the cond_ref_of opcode.
			 */
			if (status == AE_NOT_FOUND) {
				if (parent_op->common.aml_opcode == AML_COND_REF_OF_OP) {
					/*
					 * For the Conditional Reference op, it's OK if
					 * the name is not found;  We just need a way to
					 * indicate this to the interpreter, set the
					 * object to the root
					 */
					obj_desc = ACPI_CAST_PTR (union acpi_operand_object, acpi_gbl_root_node);
					status = AE_OK;
				}
				else {
					/*
					 * We just plain didn't find it -- which is a
					 * very serious error at this point
					 */
					status = AE_AML_NAME_NOT_FOUND;
				}
			}
 
			if (ACPI_FAILURE (status)) {
				ACPI_REPORT_NSERROR (name_string, status);
			}
		}
 
		/* Free the namestring created above */
 
		ACPI_MEM_FREE (name_string);
 
		/* Check status from the lookup */
 
		if (ACPI_FAILURE (status)) {
			return_ACPI_STATUS (status);
		}
 
		/* Put the resulting object onto the current object stack */
 
		status = acpi_ds_obj_stack_push (obj_desc, walk_state);
		if (ACPI_FAILURE (status)) {
			return_ACPI_STATUS (status);
		}
		ACPI_DEBUGGER_EXEC (acpi_db_display_argument_object (obj_desc, walk_state));
	}
	else {
		/* Check for null name case */
 
		if (arg->common.aml_opcode == AML_INT_NAMEPATH_OP) {
			/*
			 * If the name is null, this means that this is an
			 * optional result parameter that was not specified
			 * in the original ASL.  Create a Zero Constant for a
			 * placeholder.  (Store to a constant is a Noop.)
			 */
			opcode = AML_ZERO_OP;       /* Has no arguments! */
 
			ACPI_DEBUG_PRINT ((ACPI_DB_DISPATCH, "Null namepath: Arg=%p\n", arg));
		}
		else {
			opcode = arg->common.aml_opcode;
		}
 
		/* Get the object type of the argument */
 
		op_info = acpi_ps_get_opcode_info (opcode);
		if (op_info->object_type == ACPI_TYPE_INVALID) {
			return_ACPI_STATUS (AE_NOT_IMPLEMENTED);
		}
 
		if (op_info->flags & AML_HAS_RETVAL) {
			ACPI_DEBUG_PRINT ((ACPI_DB_DISPATCH,
				"Argument previously created, already stacked \n"));
 
			ACPI_DEBUGGER_EXEC (acpi_db_display_argument_object (
				walk_state->operands [walk_state->num_operands - 1], walk_state));
 
			/*
			 * Use value that was already previously returned
			 * by the evaluation of this argument
			 */
			status = acpi_ds_result_pop_from_bottom (&obj_desc, walk_state);
			if (ACPI_FAILURE (status)) {
				/*
				 * Only error is underflow, and this indicates
				 * a missing or null operand!
				 */
				ACPI_DEBUG_PRINT ((ACPI_DB_ERROR, "Missing or null operand, %s\n",
					acpi_format_exception (status)));
				return_ACPI_STATUS (status);
			}
		}
		else {
			/* Create an ACPI_INTERNAL_OBJECT for the argument */
 
			obj_desc = acpi_ut_create_internal_object (op_info->object_type);
			if (!obj_desc) {
				return_ACPI_STATUS (AE_NO_MEMORY);
			}
 
			/* Initialize the new object */
 
			status = acpi_ds_init_object_from_op (walk_state, arg,
					 opcode, &obj_desc);
			if (ACPI_FAILURE (status)) {
				acpi_ut_delete_object_desc (obj_desc);
				return_ACPI_STATUS (status);
			}
		}
 
		/* Put the operand object on the object stack */
 
		status = acpi_ds_obj_stack_push (obj_desc, walk_state);
		if (ACPI_FAILURE (status)) {
			return_ACPI_STATUS (status);
		}
 
		ACPI_DEBUGGER_EXEC (acpi_db_display_argument_object (obj_desc, walk_state));
	}
 
	return_ACPI_STATUS (AE_OK);
}
 
 
/*******************************************************************************
 *
 * FUNCTION:    acpi_ds_create_operands
 *
 * PARAMETERS:  first_arg           - First argument of a parser argument tree
 *
 * RETURN:      Status
 *
 * DESCRIPTION: Convert an operator's arguments from a parse tree format to
 *              namespace objects and place those argument object on the object
 *              stack in preparation for evaluation by the interpreter.
 *
 ******************************************************************************/
 
acpi_status
acpi_ds_create_operands (
	struct acpi_walk_state          *walk_state,
	union acpi_parse_object         *first_arg)
{
	acpi_status                     status = AE_OK;
	union acpi_parse_object         *arg;
	u32                             arg_count = 0;
 
 
	ACPI_FUNCTION_TRACE_PTR ("ds_create_operands", first_arg);
 
 
	/* For all arguments in the list... */
 
	arg = first_arg;
	while (arg) {
		status = acpi_ds_create_operand (walk_state, arg, arg_count);
		if (ACPI_FAILURE (status)) {
			goto cleanup;
		}
 
		ACPI_DEBUG_PRINT ((ACPI_DB_DISPATCH, "Arg #%d (%p) done, Arg1=%p\n",
			arg_count, arg, first_arg));
 
		/* Move on to next argument, if any */
 
		arg = arg->common.next;
		arg_count++;
	}
 
	return_ACPI_STATUS (status);
 
 
cleanup:
	/*
	 * We must undo everything done above; meaning that we must
	 * pop everything off of the operand stack and delete those
	 * objects
	 */
	(void) acpi_ds_obj_stack_pop_and_delete (arg_count, walk_state);
 
	ACPI_DEBUG_PRINT ((ACPI_DB_ERROR, "While creating Arg %d - %s\n",
		(arg_count + 1), acpi_format_exception (status)));
	return_ACPI_STATUS (status);
}