URL
https://opencores.org/ocsvn/or1k/or1k/trunk
Subversion Repositories or1k
[/] [or1k/] [trunk/] [linux/] [linux-2.4/] [drivers/] [block/] [DAC960.c] - Rev 1765
Compare with Previous | Blame | View Log
/* Linux Driver for Mylex DAC960/AcceleRAID/eXtremeRAID PCI RAID Controllers Copyright 1998-2001 by Leonard N. Zubkoff <lnz@dandelion.com> This program is free software; you may redistribute and/or modify it under the terms of the GNU General Public License Version 2 as published by the Free Software Foundation. This program is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY, without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for complete details. The author respectfully requests that any modifications to this software be sent directly to him for evaluation and testing. */ #define DAC960_DriverVersion "2.4.11" #define DAC960_DriverDate "11 October 2001" #include <linux/version.h> #include <linux/module.h> #include <linux/types.h> #include <linux/blk.h> #include <linux/blkdev.h> #include <linux/completion.h> #include <linux/delay.h> #include <linux/hdreg.h> #include <linux/blkpg.h> #include <linux/interrupt.h> #include <linux/ioport.h> #include <linux/locks.h> #include <linux/mm.h> #include <linux/slab.h> #include <linux/proc_fs.h> #include <linux/reboot.h> #include <linux/spinlock.h> #include <linux/timer.h> #include <linux/pci.h> #include <linux/init.h> #include <asm/io.h> #include <asm/segment.h> #include <asm/uaccess.h> #include "DAC960.h" /* DAC960_ControllerCount is the number of DAC960 Controllers detected. */ static int DAC960_ControllerCount = 0; /* DAC960_ActiveControllerCount is the number of active DAC960 Controllers detected. */ static int DAC960_ActiveControllerCount = 0; /* DAC960_Controllers is an array of pointers to the DAC960 Controller structures. */ static DAC960_Controller_T *DAC960_Controllers[DAC960_MaxControllers] = { NULL }; /* DAC960_BlockDeviceOperations is the Block Device Operations structure for DAC960 Logical Disk Devices. */ static BlockDeviceOperations_T DAC960_BlockDeviceOperations = { owner: THIS_MODULE, open: DAC960_Open, release: DAC960_Release, ioctl: DAC960_IOCTL }; /* DAC960_ProcDirectoryEntry is the DAC960 /proc/rd directory entry. */ static PROC_DirectoryEntry_T *DAC960_ProcDirectoryEntry; /* DAC960_NotifierBlock is the Notifier Block structure for DAC960 Driver. */ static NotifierBlock_T DAC960_NotifierBlock = { DAC960_Notifier, NULL, 0 }; /* DAC960_AnnounceDriver announces the Driver Version and Date, Author's Name, Copyright Notice, and Electronic Mail Address. */ static void DAC960_AnnounceDriver(DAC960_Controller_T *Controller) { DAC960_Announce("***** DAC960 RAID Driver Version " DAC960_DriverVersion " of " DAC960_DriverDate " *****\n", Controller); DAC960_Announce("Copyright 1998-2001 by Leonard N. Zubkoff " "<lnz@dandelion.com>\n", Controller); } /* DAC960_Failure prints a standardized error message, and then returns false. */ static boolean DAC960_Failure(DAC960_Controller_T *Controller, unsigned char *ErrorMessage) { DAC960_Error("While configuring DAC960 PCI RAID Controller at\n", Controller); if (Controller->IO_Address == 0) DAC960_Error("PCI Bus %d Device %d Function %d I/O Address N/A " "PCI Address 0x%X\n", Controller, Controller->Bus, Controller->Device, Controller->Function, Controller->PCI_Address); else DAC960_Error("PCI Bus %d Device %d Function %d I/O Address " "0x%X PCI Address 0x%X\n", Controller, Controller->Bus, Controller->Device, Controller->Function, Controller->IO_Address, Controller->PCI_Address); DAC960_Error("%s FAILED - DETACHING\n", Controller, ErrorMessage); return false; } /* DAC960_CreateAuxiliaryStructures allocates and initializes the auxiliary data structures for Controller. It returns true on success and false on failure. */ static boolean DAC960_CreateAuxiliaryStructures(DAC960_Controller_T *Controller) { int CommandAllocationLength, CommandAllocationGroupSize; int CommandsRemaining = 0, CommandIdentifier, CommandGroupByteCount; void *AllocationPointer = NULL; if (Controller->FirmwareType == DAC960_V1_Controller) { CommandAllocationLength = offsetof(DAC960_Command_T, V1.EndMarker); CommandAllocationGroupSize = DAC960_V1_CommandAllocationGroupSize; } else { CommandAllocationLength = offsetof(DAC960_Command_T, V2.EndMarker); CommandAllocationGroupSize = DAC960_V2_CommandAllocationGroupSize; } Controller->CommandAllocationGroupSize = CommandAllocationGroupSize; Controller->FreeCommands = NULL; for (CommandIdentifier = 1; CommandIdentifier <= Controller->DriverQueueDepth; CommandIdentifier++) { DAC960_Command_T *Command; if (--CommandsRemaining <= 0) { CommandsRemaining = Controller->DriverQueueDepth - CommandIdentifier + 1; if (CommandsRemaining > CommandAllocationGroupSize) CommandsRemaining = CommandAllocationGroupSize; CommandGroupByteCount = CommandsRemaining * CommandAllocationLength; AllocationPointer = kmalloc(CommandGroupByteCount, GFP_ATOMIC); if (AllocationPointer == NULL) return DAC960_Failure(Controller, "AUXILIARY STRUCTURE CREATION"); memset(AllocationPointer, 0, CommandGroupByteCount); } Command = (DAC960_Command_T *) AllocationPointer; AllocationPointer += CommandAllocationLength; Command->CommandIdentifier = CommandIdentifier; Command->Controller = Controller; Command->Next = Controller->FreeCommands; Controller->FreeCommands = Command; Controller->Commands[CommandIdentifier-1] = Command; } return true; } /* DAC960_DestroyAuxiliaryStructures deallocates the auxiliary data structures for Controller. */ static void DAC960_DestroyAuxiliaryStructures(DAC960_Controller_T *Controller) { int i; Controller->FreeCommands = NULL; for (i = 0; i < Controller->DriverQueueDepth; i++) { DAC960_Command_T *Command = Controller->Commands[i]; if (Command != NULL && (Command->CommandIdentifier % Controller->CommandAllocationGroupSize) == 1) kfree(Command); Controller->Commands[i] = NULL; } if (Controller->CombinedStatusBuffer != NULL) { kfree(Controller->CombinedStatusBuffer); Controller->CombinedStatusBuffer = NULL; Controller->CurrentStatusBuffer = NULL; } if (Controller->FirmwareType == DAC960_V1_Controller) return; for (i = 0; i < DAC960_MaxLogicalDrives; i++) if (Controller->V2.LogicalDeviceInformation[i] != NULL) { kfree(Controller->V2.LogicalDeviceInformation[i]); Controller->V2.LogicalDeviceInformation[i] = NULL; } for (i = 0; i < DAC960_V2_MaxPhysicalDevices; i++) { if (Controller->V2.PhysicalDeviceInformation[i] != NULL) { kfree(Controller->V2.PhysicalDeviceInformation[i]); Controller->V2.PhysicalDeviceInformation[i] = NULL; } if (Controller->V2.InquiryUnitSerialNumber[i] != NULL) { kfree(Controller->V2.InquiryUnitSerialNumber[i]); Controller->V2.InquiryUnitSerialNumber[i] = NULL; } } } /* DAC960_V1_ClearCommand clears critical fields of Command for DAC960 V1 Firmware Controllers. */ static inline void DAC960_V1_ClearCommand(DAC960_Command_T *Command) { DAC960_V1_CommandMailbox_T *CommandMailbox = &Command->V1.CommandMailbox; memset(CommandMailbox, 0, sizeof(DAC960_V1_CommandMailbox_T)); Command->V1.CommandStatus = 0; } /* DAC960_V2_ClearCommand clears critical fields of Command for DAC960 V2 Firmware Controllers. */ static inline void DAC960_V2_ClearCommand(DAC960_Command_T *Command) { DAC960_V2_CommandMailbox_T *CommandMailbox = &Command->V2.CommandMailbox; memset(CommandMailbox, 0, sizeof(DAC960_V2_CommandMailbox_T)); Command->V2.CommandStatus = 0; } /* DAC960_AllocateCommand allocates a Command structure from Controller's free list. During driver initialization, a special initialization command has been placed on the free list to guarantee that command allocation can never fail. */ static inline DAC960_Command_T *DAC960_AllocateCommand(DAC960_Controller_T *Controller) { DAC960_Command_T *Command = Controller->FreeCommands; if (Command == NULL) return NULL; Controller->FreeCommands = Command->Next; Command->Next = NULL; return Command; } /* DAC960_DeallocateCommand deallocates Command, returning it to Controller's free list. */ static inline void DAC960_DeallocateCommand(DAC960_Command_T *Command) { DAC960_Controller_T *Controller = Command->Controller; Command->Next = Controller->FreeCommands; Controller->FreeCommands = Command; } /* DAC960_WaitForCommand waits for a wake_up on Controller's Command Wait Queue. */ static void DAC960_WaitForCommand(DAC960_Controller_T *Controller) { spin_unlock_irq(&io_request_lock); __wait_event(Controller->CommandWaitQueue, Controller->FreeCommands); spin_lock_irq(&io_request_lock); } /* DAC960_BA_QueueCommand queues Command for DAC960 BA Series Controllers. */ static void DAC960_BA_QueueCommand(DAC960_Command_T *Command) { DAC960_Controller_T *Controller = Command->Controller; void *ControllerBaseAddress = Controller->BaseAddress; DAC960_V2_CommandMailbox_T *CommandMailbox = &Command->V2.CommandMailbox; DAC960_V2_CommandMailbox_T *NextCommandMailbox = Controller->V2.NextCommandMailbox; CommandMailbox->Common.CommandIdentifier = Command->CommandIdentifier; DAC960_BA_WriteCommandMailbox(NextCommandMailbox, CommandMailbox); if (Controller->V2.PreviousCommandMailbox1->Words[0] == 0 || Controller->V2.PreviousCommandMailbox2->Words[0] == 0) DAC960_BA_MemoryMailboxNewCommand(ControllerBaseAddress); Controller->V2.PreviousCommandMailbox2 = Controller->V2.PreviousCommandMailbox1; Controller->V2.PreviousCommandMailbox1 = NextCommandMailbox; if (++NextCommandMailbox > Controller->V2.LastCommandMailbox) NextCommandMailbox = Controller->V2.FirstCommandMailbox; Controller->V2.NextCommandMailbox = NextCommandMailbox; } /* DAC960_LP_QueueCommand queues Command for DAC960 LP Series Controllers. */ static void DAC960_LP_QueueCommand(DAC960_Command_T *Command) { DAC960_Controller_T *Controller = Command->Controller; void *ControllerBaseAddress = Controller->BaseAddress; DAC960_V2_CommandMailbox_T *CommandMailbox = &Command->V2.CommandMailbox; DAC960_V2_CommandMailbox_T *NextCommandMailbox = Controller->V2.NextCommandMailbox; CommandMailbox->Common.CommandIdentifier = Command->CommandIdentifier; DAC960_LP_WriteCommandMailbox(NextCommandMailbox, CommandMailbox); if (Controller->V2.PreviousCommandMailbox1->Words[0] == 0 || Controller->V2.PreviousCommandMailbox2->Words[0] == 0) DAC960_LP_MemoryMailboxNewCommand(ControllerBaseAddress); Controller->V2.PreviousCommandMailbox2 = Controller->V2.PreviousCommandMailbox1; Controller->V2.PreviousCommandMailbox1 = NextCommandMailbox; if (++NextCommandMailbox > Controller->V2.LastCommandMailbox) NextCommandMailbox = Controller->V2.FirstCommandMailbox; Controller->V2.NextCommandMailbox = NextCommandMailbox; } /* DAC960_LA_QueueCommandDualMode queues Command for DAC960 LA Series Controllers with Dual Mode Firmware. */ static void DAC960_LA_QueueCommandDualMode(DAC960_Command_T *Command) { DAC960_Controller_T *Controller = Command->Controller; void *ControllerBaseAddress = Controller->BaseAddress; DAC960_V1_CommandMailbox_T *CommandMailbox = &Command->V1.CommandMailbox; DAC960_V1_CommandMailbox_T *NextCommandMailbox = Controller->V1.NextCommandMailbox; CommandMailbox->Common.CommandIdentifier = Command->CommandIdentifier; DAC960_LA_WriteCommandMailbox(NextCommandMailbox, CommandMailbox); if (Controller->V1.PreviousCommandMailbox1->Words[0] == 0 || Controller->V1.PreviousCommandMailbox2->Words[0] == 0) DAC960_LA_MemoryMailboxNewCommand(ControllerBaseAddress); Controller->V1.PreviousCommandMailbox2 = Controller->V1.PreviousCommandMailbox1; Controller->V1.PreviousCommandMailbox1 = NextCommandMailbox; if (++NextCommandMailbox > Controller->V1.LastCommandMailbox) NextCommandMailbox = Controller->V1.FirstCommandMailbox; Controller->V1.NextCommandMailbox = NextCommandMailbox; } /* DAC960_LA_QueueCommandSingleMode queues Command for DAC960 LA Series Controllers with Single Mode Firmware. */ static void DAC960_LA_QueueCommandSingleMode(DAC960_Command_T *Command) { DAC960_Controller_T *Controller = Command->Controller; void *ControllerBaseAddress = Controller->BaseAddress; DAC960_V1_CommandMailbox_T *CommandMailbox = &Command->V1.CommandMailbox; DAC960_V1_CommandMailbox_T *NextCommandMailbox = Controller->V1.NextCommandMailbox; CommandMailbox->Common.CommandIdentifier = Command->CommandIdentifier; DAC960_LA_WriteCommandMailbox(NextCommandMailbox, CommandMailbox); if (Controller->V1.PreviousCommandMailbox1->Words[0] == 0 || Controller->V1.PreviousCommandMailbox2->Words[0] == 0) DAC960_LA_HardwareMailboxNewCommand(ControllerBaseAddress); Controller->V1.PreviousCommandMailbox2 = Controller->V1.PreviousCommandMailbox1; Controller->V1.PreviousCommandMailbox1 = NextCommandMailbox; if (++NextCommandMailbox > Controller->V1.LastCommandMailbox) NextCommandMailbox = Controller->V1.FirstCommandMailbox; Controller->V1.NextCommandMailbox = NextCommandMailbox; } /* DAC960_PG_QueueCommandDualMode queues Command for DAC960 PG Series Controllers with Dual Mode Firmware. */ static void DAC960_PG_QueueCommandDualMode(DAC960_Command_T *Command) { DAC960_Controller_T *Controller = Command->Controller; void *ControllerBaseAddress = Controller->BaseAddress; DAC960_V1_CommandMailbox_T *CommandMailbox = &Command->V1.CommandMailbox; DAC960_V1_CommandMailbox_T *NextCommandMailbox = Controller->V1.NextCommandMailbox; CommandMailbox->Common.CommandIdentifier = Command->CommandIdentifier; DAC960_PG_WriteCommandMailbox(NextCommandMailbox, CommandMailbox); if (Controller->V1.PreviousCommandMailbox1->Words[0] == 0 || Controller->V1.PreviousCommandMailbox2->Words[0] == 0) DAC960_PG_MemoryMailboxNewCommand(ControllerBaseAddress); Controller->V1.PreviousCommandMailbox2 = Controller->V1.PreviousCommandMailbox1; Controller->V1.PreviousCommandMailbox1 = NextCommandMailbox; if (++NextCommandMailbox > Controller->V1.LastCommandMailbox) NextCommandMailbox = Controller->V1.FirstCommandMailbox; Controller->V1.NextCommandMailbox = NextCommandMailbox; } /* DAC960_PG_QueueCommandSingleMode queues Command for DAC960 PG Series Controllers with Single Mode Firmware. */ static void DAC960_PG_QueueCommandSingleMode(DAC960_Command_T *Command) { DAC960_Controller_T *Controller = Command->Controller; void *ControllerBaseAddress = Controller->BaseAddress; DAC960_V1_CommandMailbox_T *CommandMailbox = &Command->V1.CommandMailbox; DAC960_V1_CommandMailbox_T *NextCommandMailbox = Controller->V1.NextCommandMailbox; CommandMailbox->Common.CommandIdentifier = Command->CommandIdentifier; DAC960_PG_WriteCommandMailbox(NextCommandMailbox, CommandMailbox); if (Controller->V1.PreviousCommandMailbox1->Words[0] == 0 || Controller->V1.PreviousCommandMailbox2->Words[0] == 0) DAC960_PG_HardwareMailboxNewCommand(ControllerBaseAddress); Controller->V1.PreviousCommandMailbox2 = Controller->V1.PreviousCommandMailbox1; Controller->V1.PreviousCommandMailbox1 = NextCommandMailbox; if (++NextCommandMailbox > Controller->V1.LastCommandMailbox) NextCommandMailbox = Controller->V1.FirstCommandMailbox; Controller->V1.NextCommandMailbox = NextCommandMailbox; } /* DAC960_PD_QueueCommand queues Command for DAC960 PD Series Controllers. */ static void DAC960_PD_QueueCommand(DAC960_Command_T *Command) { DAC960_Controller_T *Controller = Command->Controller; void *ControllerBaseAddress = Controller->BaseAddress; DAC960_V1_CommandMailbox_T *CommandMailbox = &Command->V1.CommandMailbox; CommandMailbox->Common.CommandIdentifier = Command->CommandIdentifier; while (DAC960_PD_MailboxFullP(ControllerBaseAddress)) udelay(1); DAC960_PD_WriteCommandMailbox(ControllerBaseAddress, CommandMailbox); DAC960_PD_NewCommand(ControllerBaseAddress); } /* DAC960_P_QueueCommand queues Command for DAC960 P Series Controllers. */ static void DAC960_P_QueueCommand(DAC960_Command_T *Command) { DAC960_Controller_T *Controller = Command->Controller; void *ControllerBaseAddress = Controller->BaseAddress; DAC960_V1_CommandMailbox_T *CommandMailbox = &Command->V1.CommandMailbox; CommandMailbox->Common.CommandIdentifier = Command->CommandIdentifier; switch (CommandMailbox->Common.CommandOpcode) { case DAC960_V1_Enquiry: CommandMailbox->Common.CommandOpcode = DAC960_V1_Enquiry_Old; break; case DAC960_V1_GetDeviceState: CommandMailbox->Common.CommandOpcode = DAC960_V1_GetDeviceState_Old; break; case DAC960_V1_Read: CommandMailbox->Common.CommandOpcode = DAC960_V1_Read_Old; DAC960_PD_To_P_TranslateReadWriteCommand(CommandMailbox); break; case DAC960_V1_Write: CommandMailbox->Common.CommandOpcode = DAC960_V1_Write_Old; DAC960_PD_To_P_TranslateReadWriteCommand(CommandMailbox); break; case DAC960_V1_ReadWithScatterGather: CommandMailbox->Common.CommandOpcode = DAC960_V1_ReadWithScatterGather_Old; DAC960_PD_To_P_TranslateReadWriteCommand(CommandMailbox); break; case DAC960_V1_WriteWithScatterGather: CommandMailbox->Common.CommandOpcode = DAC960_V1_WriteWithScatterGather_Old; DAC960_PD_To_P_TranslateReadWriteCommand(CommandMailbox); break; default: break; } while (DAC960_PD_MailboxFullP(ControllerBaseAddress)) udelay(1); DAC960_PD_WriteCommandMailbox(ControllerBaseAddress, CommandMailbox); DAC960_PD_NewCommand(ControllerBaseAddress); } /* DAC960_ExecuteCommand executes Command and waits for completion. */ static void DAC960_ExecuteCommand(DAC960_Command_T *Command) { DAC960_Controller_T *Controller = Command->Controller; DECLARE_COMPLETION(Completion); unsigned long ProcessorFlags; Command->Completion = &Completion; DAC960_AcquireControllerLock(Controller, &ProcessorFlags); DAC960_QueueCommand(Command); DAC960_ReleaseControllerLock(Controller, &ProcessorFlags); if (in_interrupt()) return; wait_for_completion(&Completion); } /* DAC960_V1_ExecuteType3 executes a DAC960 V1 Firmware Controller Type 3 Command and waits for completion. It returns true on success and false on failure. */ static boolean DAC960_V1_ExecuteType3(DAC960_Controller_T *Controller, DAC960_V1_CommandOpcode_T CommandOpcode, void *DataPointer) { DAC960_Command_T *Command = DAC960_AllocateCommand(Controller); DAC960_V1_CommandMailbox_T *CommandMailbox = &Command->V1.CommandMailbox; DAC960_V1_CommandStatus_T CommandStatus; DAC960_V1_ClearCommand(Command); Command->CommandType = DAC960_ImmediateCommand; CommandMailbox->Type3.CommandOpcode = CommandOpcode; CommandMailbox->Type3.BusAddress = Virtual_to_Bus32(DataPointer); DAC960_ExecuteCommand(Command); CommandStatus = Command->V1.CommandStatus; DAC960_DeallocateCommand(Command); return (CommandStatus == DAC960_V1_NormalCompletion); } /* DAC960_V1_ExecuteTypeB executes a DAC960 V1 Firmware Controller Type 3B Command and waits for completion. It returns true on success and false on failure. */ static boolean DAC960_V1_ExecuteType3B(DAC960_Controller_T *Controller, DAC960_V1_CommandOpcode_T CommandOpcode, unsigned char CommandOpcode2, void *DataPointer) { DAC960_Command_T *Command = DAC960_AllocateCommand(Controller); DAC960_V1_CommandMailbox_T *CommandMailbox = &Command->V1.CommandMailbox; DAC960_V1_CommandStatus_T CommandStatus; DAC960_V1_ClearCommand(Command); Command->CommandType = DAC960_ImmediateCommand; CommandMailbox->Type3B.CommandOpcode = CommandOpcode; CommandMailbox->Type3B.CommandOpcode2 = CommandOpcode2; CommandMailbox->Type3B.BusAddress = Virtual_to_Bus32(DataPointer); DAC960_ExecuteCommand(Command); CommandStatus = Command->V1.CommandStatus; DAC960_DeallocateCommand(Command); return (CommandStatus == DAC960_V1_NormalCompletion); } /* DAC960_V1_ExecuteType3D executes a DAC960 V1 Firmware Controller Type 3D Command and waits for completion. It returns true on success and false on failure. */ static boolean DAC960_V1_ExecuteType3D(DAC960_Controller_T *Controller, DAC960_V1_CommandOpcode_T CommandOpcode, unsigned char Channel, unsigned char TargetID, void *DataPointer) { DAC960_Command_T *Command = DAC960_AllocateCommand(Controller); DAC960_V1_CommandMailbox_T *CommandMailbox = &Command->V1.CommandMailbox; DAC960_V1_CommandStatus_T CommandStatus; DAC960_V1_ClearCommand(Command); Command->CommandType = DAC960_ImmediateCommand; CommandMailbox->Type3D.CommandOpcode = CommandOpcode; CommandMailbox->Type3D.Channel = Channel; CommandMailbox->Type3D.TargetID = TargetID; CommandMailbox->Type3D.BusAddress = Virtual_to_Bus32(DataPointer); DAC960_ExecuteCommand(Command); CommandStatus = Command->V1.CommandStatus; DAC960_DeallocateCommand(Command); return (CommandStatus == DAC960_V1_NormalCompletion); } /* DAC960_V2_GeneralInfo executes a DAC960 V2 Firmware General Information Reading IOCTL Command and waits for completion. It returns true on success and false on failure. */ static boolean DAC960_V2_GeneralInfo(DAC960_Controller_T *Controller, DAC960_V2_IOCTL_Opcode_T IOCTL_Opcode, void *DataPointer, unsigned int DataByteCount) { DAC960_Command_T *Command = DAC960_AllocateCommand(Controller); DAC960_V2_CommandMailbox_T *CommandMailbox = &Command->V2.CommandMailbox; DAC960_V2_CommandStatus_T CommandStatus; DAC960_V2_ClearCommand(Command); Command->CommandType = DAC960_ImmediateCommand; CommandMailbox->Common.CommandOpcode = DAC960_V2_IOCTL; CommandMailbox->Common.CommandControlBits .DataTransferControllerToHost = true; CommandMailbox->Common.CommandControlBits .NoAutoRequestSense = true; CommandMailbox->Common.DataTransferSize = DataByteCount; CommandMailbox->Common.IOCTL_Opcode = IOCTL_Opcode; CommandMailbox->Common.DataTransferMemoryAddress .ScatterGatherSegments[0] .SegmentDataPointer = Virtual_to_Bus64(DataPointer); CommandMailbox->Common.DataTransferMemoryAddress .ScatterGatherSegments[0] .SegmentByteCount = CommandMailbox->Common.DataTransferSize; DAC960_ExecuteCommand(Command); CommandStatus = Command->V2.CommandStatus; DAC960_DeallocateCommand(Command); return (CommandStatus == DAC960_V2_NormalCompletion); } /* DAC960_V2_ControllerInfo executes a DAC960 V2 Firmware Controller Information Reading IOCTL Command and waits for completion. It returns true on success and false on failure. */ static boolean DAC960_V2_ControllerInfo(DAC960_Controller_T *Controller, DAC960_V2_IOCTL_Opcode_T IOCTL_Opcode, void *DataPointer, unsigned int DataByteCount) { DAC960_Command_T *Command = DAC960_AllocateCommand(Controller); DAC960_V2_CommandMailbox_T *CommandMailbox = &Command->V2.CommandMailbox; DAC960_V2_CommandStatus_T CommandStatus; DAC960_V2_ClearCommand(Command); Command->CommandType = DAC960_ImmediateCommand; CommandMailbox->ControllerInfo.CommandOpcode = DAC960_V2_IOCTL; CommandMailbox->ControllerInfo.CommandControlBits .DataTransferControllerToHost = true; CommandMailbox->ControllerInfo.CommandControlBits .NoAutoRequestSense = true; CommandMailbox->ControllerInfo.DataTransferSize = DataByteCount; CommandMailbox->ControllerInfo.ControllerNumber = 0; CommandMailbox->ControllerInfo.IOCTL_Opcode = IOCTL_Opcode; CommandMailbox->ControllerInfo.DataTransferMemoryAddress .ScatterGatherSegments[0] .SegmentDataPointer = Virtual_to_Bus64(DataPointer); CommandMailbox->ControllerInfo.DataTransferMemoryAddress .ScatterGatherSegments[0] .SegmentByteCount = CommandMailbox->ControllerInfo.DataTransferSize; DAC960_ExecuteCommand(Command); CommandStatus = Command->V2.CommandStatus; DAC960_DeallocateCommand(Command); return (CommandStatus == DAC960_V2_NormalCompletion); } /* DAC960_V2_LogicalDeviceInfo executes a DAC960 V2 Firmware Controller Logical Device Information Reading IOCTL Command and waits for completion. It returns true on success and false on failure. */ static boolean DAC960_V2_LogicalDeviceInfo(DAC960_Controller_T *Controller, DAC960_V2_IOCTL_Opcode_T IOCTL_Opcode, unsigned short LogicalDeviceNumber, void *DataPointer, unsigned int DataByteCount) { DAC960_Command_T *Command = DAC960_AllocateCommand(Controller); DAC960_V2_CommandMailbox_T *CommandMailbox = &Command->V2.CommandMailbox; DAC960_V2_CommandStatus_T CommandStatus; DAC960_V2_ClearCommand(Command); Command->CommandType = DAC960_ImmediateCommand; CommandMailbox->LogicalDeviceInfo.CommandOpcode = DAC960_V2_IOCTL; CommandMailbox->LogicalDeviceInfo.CommandControlBits .DataTransferControllerToHost = true; CommandMailbox->LogicalDeviceInfo.CommandControlBits .NoAutoRequestSense = true; CommandMailbox->LogicalDeviceInfo.DataTransferSize = DataByteCount; CommandMailbox->LogicalDeviceInfo.LogicalDevice.LogicalDeviceNumber = LogicalDeviceNumber; CommandMailbox->LogicalDeviceInfo.IOCTL_Opcode = IOCTL_Opcode; CommandMailbox->LogicalDeviceInfo.DataTransferMemoryAddress .ScatterGatherSegments[0] .SegmentDataPointer = Virtual_to_Bus64(DataPointer); CommandMailbox->LogicalDeviceInfo.DataTransferMemoryAddress .ScatterGatherSegments[0] .SegmentByteCount = CommandMailbox->LogicalDeviceInfo.DataTransferSize; DAC960_ExecuteCommand(Command); CommandStatus = Command->V2.CommandStatus; DAC960_DeallocateCommand(Command); return (CommandStatus == DAC960_V2_NormalCompletion); } /* DAC960_V2_PhysicalDeviceInfo executes a DAC960 V2 Firmware Controller Physical Device Information Reading IOCTL Command and waits for completion. It returns true on success and false on failure. */ static boolean DAC960_V2_PhysicalDeviceInfo(DAC960_Controller_T *Controller, DAC960_V2_IOCTL_Opcode_T IOCTL_Opcode, unsigned char Channel, unsigned char TargetID, unsigned char LogicalUnit, void *DataPointer, unsigned int DataByteCount) { DAC960_Command_T *Command = DAC960_AllocateCommand(Controller); DAC960_V2_CommandMailbox_T *CommandMailbox = &Command->V2.CommandMailbox; DAC960_V2_CommandStatus_T CommandStatus; DAC960_V2_ClearCommand(Command); Command->CommandType = DAC960_ImmediateCommand; CommandMailbox->PhysicalDeviceInfo.CommandOpcode = DAC960_V2_IOCTL; CommandMailbox->PhysicalDeviceInfo.CommandControlBits .DataTransferControllerToHost = true; CommandMailbox->PhysicalDeviceInfo.CommandControlBits .NoAutoRequestSense = true; CommandMailbox->PhysicalDeviceInfo.DataTransferSize = DataByteCount; CommandMailbox->PhysicalDeviceInfo.PhysicalDevice.LogicalUnit = LogicalUnit; CommandMailbox->PhysicalDeviceInfo.PhysicalDevice.TargetID = TargetID; CommandMailbox->PhysicalDeviceInfo.PhysicalDevice.Channel = Channel; CommandMailbox->PhysicalDeviceInfo.IOCTL_Opcode = IOCTL_Opcode; CommandMailbox->PhysicalDeviceInfo.DataTransferMemoryAddress .ScatterGatherSegments[0] .SegmentDataPointer = Virtual_to_Bus64(DataPointer); CommandMailbox->PhysicalDeviceInfo.DataTransferMemoryAddress .ScatterGatherSegments[0] .SegmentByteCount = CommandMailbox->PhysicalDeviceInfo.DataTransferSize; DAC960_ExecuteCommand(Command); CommandStatus = Command->V2.CommandStatus; DAC960_DeallocateCommand(Command); return (CommandStatus == DAC960_V2_NormalCompletion); } /* DAC960_V2_DeviceOperation executes a DAC960 V2 Firmware Controller Device Operation IOCTL Command and waits for completion. It returns true on success and false on failure. */ static boolean DAC960_V2_DeviceOperation(DAC960_Controller_T *Controller, DAC960_V2_IOCTL_Opcode_T IOCTL_Opcode, DAC960_V2_OperationDevice_T OperationDevice) { DAC960_Command_T *Command = DAC960_AllocateCommand(Controller); DAC960_V2_CommandMailbox_T *CommandMailbox = &Command->V2.CommandMailbox; DAC960_V2_CommandStatus_T CommandStatus; DAC960_V2_ClearCommand(Command); Command->CommandType = DAC960_ImmediateCommand; CommandMailbox->DeviceOperation.CommandOpcode = DAC960_V2_IOCTL; CommandMailbox->DeviceOperation.CommandControlBits .DataTransferControllerToHost = true; CommandMailbox->DeviceOperation.CommandControlBits .NoAutoRequestSense = true; CommandMailbox->DeviceOperation.IOCTL_Opcode = IOCTL_Opcode; CommandMailbox->DeviceOperation.OperationDevice = OperationDevice; DAC960_ExecuteCommand(Command); CommandStatus = Command->V2.CommandStatus; DAC960_DeallocateCommand(Command); return (CommandStatus == DAC960_V2_NormalCompletion); } /* DAC960_V1_EnableMemoryMailboxInterface enables the Memory Mailbox Interface for DAC960 V1 Firmware Controllers. */ static boolean DAC960_V1_EnableMemoryMailboxInterface(DAC960_Controller_T *Controller) { void *ControllerBaseAddress = Controller->BaseAddress; DAC960_V1_CommandMailbox_T *CommandMailboxesMemory; DAC960_V1_StatusMailbox_T *StatusMailboxesMemory; DAC960_V1_CommandMailbox_T CommandMailbox; DAC960_V1_CommandStatus_T CommandStatus; unsigned long MemoryMailboxPagesAddress; unsigned long MemoryMailboxPagesOrder; unsigned long MemoryMailboxPagesSize; void *SavedMemoryMailboxesAddress = NULL; short NextCommandMailboxIndex = 0; short NextStatusMailboxIndex = 0; int TimeoutCounter = 1000000, i; MemoryMailboxPagesOrder = 0; MemoryMailboxPagesSize = DAC960_V1_CommandMailboxCount * sizeof(DAC960_V1_CommandMailbox_T) + DAC960_V1_StatusMailboxCount * sizeof(DAC960_V1_StatusMailbox_T); while (MemoryMailboxPagesSize > PAGE_SIZE << MemoryMailboxPagesOrder) MemoryMailboxPagesOrder++; if (Controller->HardwareType == DAC960_LA_Controller) DAC960_LA_RestoreMemoryMailboxInfo(Controller, &SavedMemoryMailboxesAddress, &NextCommandMailboxIndex, &NextStatusMailboxIndex); else DAC960_PG_RestoreMemoryMailboxInfo(Controller, &SavedMemoryMailboxesAddress, &NextCommandMailboxIndex, &NextStatusMailboxIndex); if (SavedMemoryMailboxesAddress == NULL) { MemoryMailboxPagesAddress = __get_free_pages(GFP_KERNEL, MemoryMailboxPagesOrder); Controller->MemoryMailboxPagesAddress = MemoryMailboxPagesAddress; CommandMailboxesMemory = (DAC960_V1_CommandMailbox_T *) MemoryMailboxPagesAddress; } else CommandMailboxesMemory = SavedMemoryMailboxesAddress; if (CommandMailboxesMemory == NULL) return false; Controller->MemoryMailboxPagesOrder = MemoryMailboxPagesOrder; memset(CommandMailboxesMemory, 0, MemoryMailboxPagesSize); Controller->V1.FirstCommandMailbox = CommandMailboxesMemory; CommandMailboxesMemory += DAC960_V1_CommandMailboxCount - 1; Controller->V1.LastCommandMailbox = CommandMailboxesMemory; Controller->V1.NextCommandMailbox = &Controller->V1.FirstCommandMailbox[NextCommandMailboxIndex]; if (--NextCommandMailboxIndex < 0) NextCommandMailboxIndex = DAC960_V1_CommandMailboxCount - 1; Controller->V1.PreviousCommandMailbox1 = &Controller->V1.FirstCommandMailbox[NextCommandMailboxIndex]; if (--NextCommandMailboxIndex < 0) NextCommandMailboxIndex = DAC960_V1_CommandMailboxCount - 1; Controller->V1.PreviousCommandMailbox2 = &Controller->V1.FirstCommandMailbox[NextCommandMailboxIndex]; StatusMailboxesMemory = (DAC960_V1_StatusMailbox_T *) (CommandMailboxesMemory + 1); Controller->V1.FirstStatusMailbox = StatusMailboxesMemory; StatusMailboxesMemory += DAC960_V1_StatusMailboxCount - 1; Controller->V1.LastStatusMailbox = StatusMailboxesMemory; Controller->V1.NextStatusMailbox = &Controller->V1.FirstStatusMailbox[NextStatusMailboxIndex]; if (SavedMemoryMailboxesAddress != NULL) return true; /* Enable the Memory Mailbox Interface. */ Controller->V1.DualModeMemoryMailboxInterface = true; CommandMailbox.TypeX.CommandOpcode = 0x2B; CommandMailbox.TypeX.CommandIdentifier = 0; CommandMailbox.TypeX.CommandOpcode2 = 0x14; CommandMailbox.TypeX.CommandMailboxesBusAddress = Virtual_to_Bus32(Controller->V1.FirstCommandMailbox); CommandMailbox.TypeX.StatusMailboxesBusAddress = Virtual_to_Bus32(Controller->V1.FirstStatusMailbox); for (i = 0; i < 2; i++) switch (Controller->HardwareType) { case DAC960_LA_Controller: while (--TimeoutCounter >= 0) { if (!DAC960_LA_HardwareMailboxFullP(ControllerBaseAddress)) break; udelay(10); } if (TimeoutCounter < 0) return false; DAC960_LA_WriteHardwareMailbox(ControllerBaseAddress, &CommandMailbox); DAC960_LA_HardwareMailboxNewCommand(ControllerBaseAddress); while (--TimeoutCounter >= 0) { if (DAC960_LA_HardwareMailboxStatusAvailableP( ControllerBaseAddress)) break; udelay(10); } if (TimeoutCounter < 0) return false; CommandStatus = DAC960_LA_ReadStatusRegister(ControllerBaseAddress); DAC960_LA_AcknowledgeHardwareMailboxInterrupt(ControllerBaseAddress); DAC960_LA_AcknowledgeHardwareMailboxStatus(ControllerBaseAddress); if (CommandStatus == DAC960_V1_NormalCompletion) return true; Controller->V1.DualModeMemoryMailboxInterface = false; CommandMailbox.TypeX.CommandOpcode2 = 0x10; break; case DAC960_PG_Controller: while (--TimeoutCounter >= 0) { if (!DAC960_PG_HardwareMailboxFullP(ControllerBaseAddress)) break; udelay(10); } if (TimeoutCounter < 0) return false; DAC960_PG_WriteHardwareMailbox(ControllerBaseAddress, &CommandMailbox); DAC960_PG_HardwareMailboxNewCommand(ControllerBaseAddress); while (--TimeoutCounter >= 0) { if (DAC960_PG_HardwareMailboxStatusAvailableP( ControllerBaseAddress)) break; udelay(10); } if (TimeoutCounter < 0) return false; CommandStatus = DAC960_PG_ReadStatusRegister(ControllerBaseAddress); DAC960_PG_AcknowledgeHardwareMailboxInterrupt(ControllerBaseAddress); DAC960_PG_AcknowledgeHardwareMailboxStatus(ControllerBaseAddress); if (CommandStatus == DAC960_V1_NormalCompletion) return true; Controller->V1.DualModeMemoryMailboxInterface = false; CommandMailbox.TypeX.CommandOpcode2 = 0x10; break; default: break; } return false; } /* DAC960_V2_EnableMemoryMailboxInterface enables the Memory Mailbox Interface for DAC960 V2 Firmware Controllers. */ static boolean DAC960_V2_EnableMemoryMailboxInterface(DAC960_Controller_T *Controller) { void *ControllerBaseAddress = Controller->BaseAddress; DAC960_V2_CommandMailbox_T *CommandMailboxesMemory; DAC960_V2_StatusMailbox_T *StatusMailboxesMemory; DAC960_V2_CommandMailbox_T CommandMailbox; DAC960_V2_CommandStatus_T CommandStatus = 0; unsigned long MemoryMailboxPagesAddress; unsigned long MemoryMailboxPagesOrder; unsigned long MemoryMailboxPagesSize; MemoryMailboxPagesOrder = 0; MemoryMailboxPagesSize = DAC960_V2_CommandMailboxCount * sizeof(DAC960_V2_CommandMailbox_T) + DAC960_V2_StatusMailboxCount * sizeof(DAC960_V2_StatusMailbox_T) + sizeof(DAC960_V2_HealthStatusBuffer_T); while (MemoryMailboxPagesSize > PAGE_SIZE << MemoryMailboxPagesOrder) MemoryMailboxPagesOrder++; MemoryMailboxPagesAddress = __get_free_pages(GFP_KERNEL, MemoryMailboxPagesOrder); Controller->MemoryMailboxPagesAddress = MemoryMailboxPagesAddress; CommandMailboxesMemory = (DAC960_V2_CommandMailbox_T *) MemoryMailboxPagesAddress; if (CommandMailboxesMemory == NULL) return false; Controller->MemoryMailboxPagesOrder = MemoryMailboxPagesOrder; memset(CommandMailboxesMemory, 0, MemoryMailboxPagesSize); Controller->V2.FirstCommandMailbox = CommandMailboxesMemory; CommandMailboxesMemory += DAC960_V2_CommandMailboxCount - 1; Controller->V2.LastCommandMailbox = CommandMailboxesMemory; Controller->V2.NextCommandMailbox = Controller->V2.FirstCommandMailbox; Controller->V2.PreviousCommandMailbox1 = Controller->V2.LastCommandMailbox; Controller->V2.PreviousCommandMailbox2 = Controller->V2.LastCommandMailbox - 1; StatusMailboxesMemory = (DAC960_V2_StatusMailbox_T *) (CommandMailboxesMemory + 1); Controller->V2.FirstStatusMailbox = StatusMailboxesMemory; StatusMailboxesMemory += DAC960_V2_StatusMailboxCount - 1; Controller->V2.LastStatusMailbox = StatusMailboxesMemory; Controller->V2.NextStatusMailbox = Controller->V2.FirstStatusMailbox; Controller->V2.HealthStatusBuffer = (DAC960_V2_HealthStatusBuffer_T *) (StatusMailboxesMemory + 1); /* Enable the Memory Mailbox Interface. */ memset(&CommandMailbox, 0, sizeof(DAC960_V2_CommandMailbox_T)); CommandMailbox.SetMemoryMailbox.CommandIdentifier = 1; CommandMailbox.SetMemoryMailbox.CommandOpcode = DAC960_V2_IOCTL; CommandMailbox.SetMemoryMailbox.CommandControlBits.NoAutoRequestSense = true; CommandMailbox.SetMemoryMailbox.FirstCommandMailboxSizeKB = (DAC960_V2_CommandMailboxCount * sizeof(DAC960_V2_CommandMailbox_T)) >> 10; CommandMailbox.SetMemoryMailbox.FirstStatusMailboxSizeKB = (DAC960_V2_StatusMailboxCount * sizeof(DAC960_V2_StatusMailbox_T)) >> 10; CommandMailbox.SetMemoryMailbox.SecondCommandMailboxSizeKB = 0; CommandMailbox.SetMemoryMailbox.SecondStatusMailboxSizeKB = 0; CommandMailbox.SetMemoryMailbox.RequestSenseSize = 0; CommandMailbox.SetMemoryMailbox.IOCTL_Opcode = DAC960_V2_SetMemoryMailbox; CommandMailbox.SetMemoryMailbox.HealthStatusBufferSizeKB = 1; CommandMailbox.SetMemoryMailbox.HealthStatusBufferBusAddress = Virtual_to_Bus64(Controller->V2.HealthStatusBuffer); CommandMailbox.SetMemoryMailbox.FirstCommandMailboxBusAddress = Virtual_to_Bus64(Controller->V2.FirstCommandMailbox); CommandMailbox.SetMemoryMailbox.FirstStatusMailboxBusAddress = Virtual_to_Bus64(Controller->V2.FirstStatusMailbox); switch (Controller->HardwareType) { case DAC960_BA_Controller: while (DAC960_BA_HardwareMailboxFullP(ControllerBaseAddress)) udelay(1); DAC960_BA_WriteHardwareMailbox(ControllerBaseAddress, &CommandMailbox); DAC960_BA_HardwareMailboxNewCommand(ControllerBaseAddress); while (!DAC960_BA_HardwareMailboxStatusAvailableP(ControllerBaseAddress)) udelay(1); CommandStatus = DAC960_BA_ReadCommandStatus(ControllerBaseAddress); DAC960_BA_AcknowledgeHardwareMailboxInterrupt(ControllerBaseAddress); DAC960_BA_AcknowledgeHardwareMailboxStatus(ControllerBaseAddress); break; case DAC960_LP_Controller: while (DAC960_LP_HardwareMailboxFullP(ControllerBaseAddress)) udelay(1); DAC960_LP_WriteHardwareMailbox(ControllerBaseAddress, &CommandMailbox); DAC960_LP_HardwareMailboxNewCommand(ControllerBaseAddress); while (!DAC960_LP_HardwareMailboxStatusAvailableP(ControllerBaseAddress)) udelay(1); CommandStatus = DAC960_LP_ReadCommandStatus(ControllerBaseAddress); DAC960_LP_AcknowledgeHardwareMailboxInterrupt(ControllerBaseAddress); DAC960_LP_AcknowledgeHardwareMailboxStatus(ControllerBaseAddress); break; default: break; } return (CommandStatus == DAC960_V2_NormalCompletion); } /* DAC960_V1_ReadControllerConfiguration reads the Configuration Information from DAC960 V1 Firmware Controllers and initializes the Controller structure. */ static boolean DAC960_V1_ReadControllerConfiguration(DAC960_Controller_T *Controller) { DAC960_V1_Enquiry2_T Enquiry2; DAC960_V1_Config2_T Config2; int LogicalDriveNumber, Channel, TargetID; if (!DAC960_V1_ExecuteType3(Controller, DAC960_V1_Enquiry, &Controller->V1.Enquiry)) return DAC960_Failure(Controller, "ENQUIRY"); if (!DAC960_V1_ExecuteType3(Controller, DAC960_V1_Enquiry2, &Enquiry2)) return DAC960_Failure(Controller, "ENQUIRY2"); if (!DAC960_V1_ExecuteType3(Controller, DAC960_V1_ReadConfig2, &Config2)) return DAC960_Failure(Controller, "READ CONFIG2"); if (!DAC960_V1_ExecuteType3(Controller, DAC960_V1_GetLogicalDriveInformation, &Controller->V1.LogicalDriveInformation)) return DAC960_Failure(Controller, "GET LOGICAL DRIVE INFORMATION"); for (Channel = 0; Channel < Enquiry2.ActualChannels; Channel++) for (TargetID = 0; TargetID < Enquiry2.MaxTargets; TargetID++) if (!DAC960_V1_ExecuteType3D(Controller, DAC960_V1_GetDeviceState, Channel, TargetID, &Controller->V1.DeviceState [Channel][TargetID])) return DAC960_Failure(Controller, "GET DEVICE STATE"); /* Initialize the Controller Model Name and Full Model Name fields. */ switch (Enquiry2.HardwareID.SubModel) { case DAC960_V1_P_PD_PU: if (Enquiry2.SCSICapability.BusSpeed == DAC960_V1_Ultra) strcpy(Controller->ModelName, "DAC960PU"); else strcpy(Controller->ModelName, "DAC960PD"); break; case DAC960_V1_PL: strcpy(Controller->ModelName, "DAC960PL"); break; case DAC960_V1_PG: strcpy(Controller->ModelName, "DAC960PG"); break; case DAC960_V1_PJ: strcpy(Controller->ModelName, "DAC960PJ"); break; case DAC960_V1_PR: strcpy(Controller->ModelName, "DAC960PR"); break; case DAC960_V1_PT: strcpy(Controller->ModelName, "DAC960PT"); break; case DAC960_V1_PTL0: strcpy(Controller->ModelName, "DAC960PTL0"); break; case DAC960_V1_PRL: strcpy(Controller->ModelName, "DAC960PRL"); break; case DAC960_V1_PTL1: strcpy(Controller->ModelName, "DAC960PTL1"); break; case DAC960_V1_1164P: strcpy(Controller->ModelName, "DAC1164P"); break; default: return DAC960_Failure(Controller, "MODEL VERIFICATION"); } strcpy(Controller->FullModelName, "Mylex "); strcat(Controller->FullModelName, Controller->ModelName); /* Initialize the Controller Firmware Version field and verify that it is a supported firmware version. The supported firmware versions are: DAC1164P 5.06 and above DAC960PTL/PRL/PJ/PG 4.06 and above DAC960PU/PD/PL 3.51 and above DAC960PU/PD/PL/P 2.73 and above */ if (Enquiry2.FirmwareID.MajorVersion == 0) { Enquiry2.FirmwareID.MajorVersion = Controller->V1.Enquiry.MajorFirmwareVersion; Enquiry2.FirmwareID.MinorVersion = Controller->V1.Enquiry.MinorFirmwareVersion; Enquiry2.FirmwareID.FirmwareType = '0'; Enquiry2.FirmwareID.TurnID = 0; } sprintf(Controller->FirmwareVersion, "%d.%02d-%c-%02d", Enquiry2.FirmwareID.MajorVersion, Enquiry2.FirmwareID.MinorVersion, Enquiry2.FirmwareID.FirmwareType, Enquiry2.FirmwareID.TurnID); if (!((Controller->FirmwareVersion[0] == '5' && strcmp(Controller->FirmwareVersion, "5.06") >= 0) || (Controller->FirmwareVersion[0] == '4' && strcmp(Controller->FirmwareVersion, "4.06") >= 0) || (Controller->FirmwareVersion[0] == '3' && strcmp(Controller->FirmwareVersion, "3.51") >= 0) || (Controller->FirmwareVersion[0] == '2' && strcmp(Controller->FirmwareVersion, "2.73") >= 0))) { DAC960_Failure(Controller, "FIRMWARE VERSION VERIFICATION"); DAC960_Error("Firmware Version = '%s'\n", Controller, Controller->FirmwareVersion); return false; } /* Initialize the Controller Channels, Targets, Memory Size, and SAF-TE Enclosure Management Enabled fields. */ Controller->Channels = Enquiry2.ActualChannels; Controller->Targets = Enquiry2.MaxTargets; Controller->MemorySize = Enquiry2.MemorySize >> 20; Controller->V1.SAFTE_EnclosureManagementEnabled = (Enquiry2.FaultManagementType == DAC960_V1_SAFTE); /* Initialize the Controller Queue Depth, Driver Queue Depth, Logical Drive Count, Maximum Blocks per Command, Controller Scatter/Gather Limit, and Driver Scatter/Gather Limit. The Driver Queue Depth must be at most one less than the Controller Queue Depth to allow for an automatic drive rebuild operation. */ Controller->ControllerQueueDepth = Controller->V1.Enquiry.MaxCommands; Controller->DriverQueueDepth = Controller->ControllerQueueDepth - 1; if (Controller->DriverQueueDepth > DAC960_MaxDriverQueueDepth) Controller->DriverQueueDepth = DAC960_MaxDriverQueueDepth; Controller->LogicalDriveCount = Controller->V1.Enquiry.NumberOfLogicalDrives; Controller->MaxBlocksPerCommand = Enquiry2.MaxBlocksPerCommand; Controller->ControllerScatterGatherLimit = Enquiry2.MaxScatterGatherEntries; Controller->DriverScatterGatherLimit = Controller->ControllerScatterGatherLimit; if (Controller->DriverScatterGatherLimit > DAC960_V1_ScatterGatherLimit) Controller->DriverScatterGatherLimit = DAC960_V1_ScatterGatherLimit; /* Initialize the Stripe Size, Segment Size, and Geometry Translation. */ Controller->V1.StripeSize = Config2.BlocksPerStripe * Config2.BlockFactor >> (10 - DAC960_BlockSizeBits); Controller->V1.SegmentSize = Config2.BlocksPerCacheLine * Config2.BlockFactor >> (10 - DAC960_BlockSizeBits); switch (Config2.DriveGeometry) { case DAC960_V1_Geometry_128_32: Controller->V1.GeometryTranslationHeads = 128; Controller->V1.GeometryTranslationSectors = 32; break; case DAC960_V1_Geometry_255_63: Controller->V1.GeometryTranslationHeads = 255; Controller->V1.GeometryTranslationSectors = 63; break; default: return DAC960_Failure(Controller, "CONFIG2 DRIVE GEOMETRY"); } /* Initialize the Background Initialization Status. */ if ((Controller->FirmwareVersion[0] == '4' && strcmp(Controller->FirmwareVersion, "4.08") >= 0) || (Controller->FirmwareVersion[0] == '5' && strcmp(Controller->FirmwareVersion, "5.08") >= 0)) { Controller->V1.BackgroundInitializationStatusSupported = true; DAC960_V1_ExecuteType3B(Controller, DAC960_V1_BackgroundInitializationControl, 0x20, &Controller-> V1.LastBackgroundInitializationStatus); } /* Initialize the Logical Drive Initially Accessible flag. */ for (LogicalDriveNumber = 0; LogicalDriveNumber < Controller->LogicalDriveCount; LogicalDriveNumber++) if (Controller->V1.LogicalDriveInformation [LogicalDriveNumber].LogicalDriveState != DAC960_V1_LogicalDrive_Offline) Controller->LogicalDriveInitiallyAccessible[LogicalDriveNumber] = true; Controller->V1.LastRebuildStatus = DAC960_V1_NoRebuildOrCheckInProgress; return true; } /* DAC960_V2_ReadControllerConfiguration reads the Configuration Information from DAC960 V2 Firmware Controllers and initializes the Controller structure. */ static boolean DAC960_V2_ReadControllerConfiguration(DAC960_Controller_T *Controller) { DAC960_V2_ControllerInfo_T *ControllerInfo = &Controller->V2.ControllerInformation; unsigned short LogicalDeviceNumber = 0; int ModelNameLength; if (!DAC960_V2_ControllerInfo(Controller, DAC960_V2_GetControllerInfo, ControllerInfo, sizeof(DAC960_V2_ControllerInfo_T))) return DAC960_Failure(Controller, "GET CONTROLLER INFO"); if (!DAC960_V2_GeneralInfo(Controller, DAC960_V2_GetHealthStatus, Controller->V2.HealthStatusBuffer, sizeof(DAC960_V2_HealthStatusBuffer_T))) return DAC960_Failure(Controller, "GET HEALTH STATUS"); /* Initialize the Controller Model Name and Full Model Name fields. */ ModelNameLength = sizeof(ControllerInfo->ControllerName); if (ModelNameLength > sizeof(Controller->ModelName)-1) ModelNameLength = sizeof(Controller->ModelName)-1; memcpy(Controller->ModelName, ControllerInfo->ControllerName, ModelNameLength); ModelNameLength--; while (Controller->ModelName[ModelNameLength] == ' ' || Controller->ModelName[ModelNameLength] == '\0') ModelNameLength--; Controller->ModelName[++ModelNameLength] = '\0'; strcpy(Controller->FullModelName, "Mylex "); strcat(Controller->FullModelName, Controller->ModelName); /* Initialize the Controller Firmware Version field. */ sprintf(Controller->FirmwareVersion, "%d.%02d-%02d", ControllerInfo->FirmwareMajorVersion, ControllerInfo->FirmwareMinorVersion, ControllerInfo->FirmwareTurnNumber); if (ControllerInfo->FirmwareMajorVersion == 6 && ControllerInfo->FirmwareMinorVersion == 0 && ControllerInfo->FirmwareTurnNumber < 1) { DAC960_Info("FIRMWARE VERSION %s DOES NOT PROVIDE THE CONTROLLER\n", Controller, Controller->FirmwareVersion); DAC960_Info("STATUS MONITORING FUNCTIONALITY NEEDED BY THIS DRIVER.\n", Controller); DAC960_Info("PLEASE UPGRADE TO VERSION 6.00-01 OR ABOVE.\n", Controller); } /* Initialize the Controller Channels, Targets, and Memory Size. */ Controller->Channels = ControllerInfo->NumberOfPhysicalChannelsPresent; Controller->Targets = ControllerInfo->MaximumTargetsPerChannel [ControllerInfo->NumberOfPhysicalChannelsPresent-1]; Controller->MemorySize = ControllerInfo->MemorySizeMB; /* Initialize the Controller Queue Depth, Driver Queue Depth, Logical Drive Count, Maximum Blocks per Command, Controller Scatter/Gather Limit, and Driver Scatter/Gather Limit. The Driver Queue Depth must be at most one less than the Controller Queue Depth to allow for an automatic drive rebuild operation. */ Controller->ControllerQueueDepth = ControllerInfo->MaximumParallelCommands; Controller->DriverQueueDepth = Controller->ControllerQueueDepth - 1; if (Controller->DriverQueueDepth > DAC960_MaxDriverQueueDepth) Controller->DriverQueueDepth = DAC960_MaxDriverQueueDepth; Controller->LogicalDriveCount = ControllerInfo->LogicalDevicesPresent; Controller->MaxBlocksPerCommand = ControllerInfo->MaximumDataTransferSizeInBlocks; Controller->ControllerScatterGatherLimit = ControllerInfo->MaximumScatterGatherEntries; Controller->DriverScatterGatherLimit = Controller->ControllerScatterGatherLimit; if (Controller->DriverScatterGatherLimit > DAC960_V2_ScatterGatherLimit) Controller->DriverScatterGatherLimit = DAC960_V2_ScatterGatherLimit; /* Initialize the Logical Device Information. */ while (true) { DAC960_V2_LogicalDeviceInfo_T *NewLogicalDeviceInfo = &Controller->V2.NewLogicalDeviceInformation; DAC960_V2_LogicalDeviceInfo_T *LogicalDeviceInfo; DAC960_V2_PhysicalDevice_T PhysicalDevice; if (!DAC960_V2_LogicalDeviceInfo(Controller, DAC960_V2_GetLogicalDeviceInfoValid, LogicalDeviceNumber, NewLogicalDeviceInfo, sizeof(DAC960_V2_LogicalDeviceInfo_T))) break; LogicalDeviceNumber = NewLogicalDeviceInfo->LogicalDeviceNumber; if (LogicalDeviceNumber > DAC960_MaxLogicalDrives) panic("DAC960: Logical Drive Number %d not supported\n", LogicalDeviceNumber); if (NewLogicalDeviceInfo->DeviceBlockSizeInBytes != DAC960_BlockSize) panic("DAC960: Logical Drive Block Size %d not supported\n", NewLogicalDeviceInfo->DeviceBlockSizeInBytes); PhysicalDevice.Controller = 0; PhysicalDevice.Channel = NewLogicalDeviceInfo->Channel; PhysicalDevice.TargetID = NewLogicalDeviceInfo->TargetID; PhysicalDevice.LogicalUnit = NewLogicalDeviceInfo->LogicalUnit; Controller->V2.LogicalDriveToVirtualDevice[LogicalDeviceNumber] = PhysicalDevice; if (NewLogicalDeviceInfo->LogicalDeviceState != DAC960_V2_LogicalDevice_Offline) Controller->LogicalDriveInitiallyAccessible[LogicalDeviceNumber] = true; LogicalDeviceInfo = (DAC960_V2_LogicalDeviceInfo_T *) kmalloc(sizeof(DAC960_V2_LogicalDeviceInfo_T), GFP_ATOMIC); if (LogicalDeviceInfo == NULL) return DAC960_Failure(Controller, "LOGICAL DEVICE ALLOCATION"); Controller->V2.LogicalDeviceInformation[LogicalDeviceNumber] = LogicalDeviceInfo; memcpy(LogicalDeviceInfo, NewLogicalDeviceInfo, sizeof(DAC960_V2_LogicalDeviceInfo_T)); LogicalDeviceNumber++; } return true; } /* DAC960_ReportControllerConfiguration reports the Configuration Information for Controller. */ static boolean DAC960_ReportControllerConfiguration(DAC960_Controller_T *Controller) { DAC960_Info("Configuring Mylex %s PCI RAID Controller\n", Controller, Controller->ModelName); DAC960_Info(" Firmware Version: %s, Channels: %d, Memory Size: %dMB\n", Controller, Controller->FirmwareVersion, Controller->Channels, Controller->MemorySize); DAC960_Info(" PCI Bus: %d, Device: %d, Function: %d, I/O Address: ", Controller, Controller->Bus, Controller->Device, Controller->Function); if (Controller->IO_Address == 0) DAC960_Info("Unassigned\n", Controller); else DAC960_Info("0x%X\n", Controller, Controller->IO_Address); DAC960_Info(" PCI Address: 0x%X mapped at 0x%lX, IRQ Channel: %d\n", Controller, Controller->PCI_Address, (unsigned long) Controller->BaseAddress, Controller->IRQ_Channel); DAC960_Info(" Controller Queue Depth: %d, " "Maximum Blocks per Command: %d\n", Controller, Controller->ControllerQueueDepth, Controller->MaxBlocksPerCommand); DAC960_Info(" Driver Queue Depth: %d, " "Scatter/Gather Limit: %d of %d Segments\n", Controller, Controller->DriverQueueDepth, Controller->DriverScatterGatherLimit, Controller->ControllerScatterGatherLimit); if (Controller->FirmwareType == DAC960_V1_Controller) { DAC960_Info(" Stripe Size: %dKB, Segment Size: %dKB, " "BIOS Geometry: %d/%d\n", Controller, Controller->V1.StripeSize, Controller->V1.SegmentSize, Controller->V1.GeometryTranslationHeads, Controller->V1.GeometryTranslationSectors); if (Controller->V1.SAFTE_EnclosureManagementEnabled) DAC960_Info(" SAF-TE Enclosure Management Enabled\n", Controller); } return true; } /* DAC960_V1_ReadDeviceConfiguration reads the Device Configuration Information for DAC960 V1 Firmware Controllers by requesting the SCSI Inquiry and SCSI Inquiry Unit Serial Number information for each device connected to Controller. */ static boolean DAC960_V1_ReadDeviceConfiguration(DAC960_Controller_T *Controller) { DAC960_V1_DCDB_T DCDBs[DAC960_V1_MaxChannels], *DCDB; Completion_T Completions[DAC960_V1_MaxChannels], *Completion; unsigned long ProcessorFlags; int Channel, TargetID; for (TargetID = 0; TargetID < Controller->Targets; TargetID++) { for (Channel = 0; Channel < Controller->Channels; Channel++) { DAC960_Command_T *Command = Controller->Commands[Channel]; DAC960_SCSI_Inquiry_T *InquiryStandardData = &Controller->V1.InquiryStandardData[Channel][TargetID]; InquiryStandardData->PeripheralDeviceType = 0x1F; Completion = &Completions[Channel]; init_completion(Completion); DCDB = &DCDBs[Channel]; DAC960_V1_ClearCommand(Command); Command->CommandType = DAC960_ImmediateCommand; Command->Completion = Completion; Command->V1.CommandMailbox.Type3.CommandOpcode = DAC960_V1_DCDB; Command->V1.CommandMailbox.Type3.BusAddress = Virtual_to_Bus32(DCDB); DCDB->Channel = Channel; DCDB->TargetID = TargetID; DCDB->Direction = DAC960_V1_DCDB_DataTransferDeviceToSystem; DCDB->EarlyStatus = false; DCDB->Timeout = DAC960_V1_DCDB_Timeout_10_seconds; DCDB->NoAutomaticRequestSense = false; DCDB->DisconnectPermitted = true; DCDB->TransferLength = sizeof(DAC960_SCSI_Inquiry_T); DCDB->BusAddress = Virtual_to_Bus32(InquiryStandardData); DCDB->CDBLength = 6; DCDB->TransferLengthHigh4 = 0; DCDB->SenseLength = sizeof(DCDB->SenseData); DCDB->CDB[0] = 0x12; /* INQUIRY */ DCDB->CDB[1] = 0; /* EVPD = 0 */ DCDB->CDB[2] = 0; /* Page Code */ DCDB->CDB[3] = 0; /* Reserved */ DCDB->CDB[4] = sizeof(DAC960_SCSI_Inquiry_T); DCDB->CDB[5] = 0; /* Control */ DAC960_AcquireControllerLock(Controller, &ProcessorFlags); DAC960_QueueCommand(Command); DAC960_ReleaseControllerLock(Controller, &ProcessorFlags); } for (Channel = 0; Channel < Controller->Channels; Channel++) { DAC960_Command_T *Command = Controller->Commands[Channel]; DAC960_SCSI_Inquiry_UnitSerialNumber_T *InquiryUnitSerialNumber = &Controller->V1.InquiryUnitSerialNumber[Channel][TargetID]; InquiryUnitSerialNumber->PeripheralDeviceType = 0x1F; Completion = &Completions[Channel]; wait_for_completion(Completion); if (Command->V1.CommandStatus != DAC960_V1_NormalCompletion) continue; Command->Completion = Completion; DCDB = &DCDBs[Channel]; DCDB->TransferLength = sizeof(DAC960_SCSI_Inquiry_UnitSerialNumber_T); DCDB->BusAddress = Virtual_to_Bus32(InquiryUnitSerialNumber); DCDB->SenseLength = sizeof(DCDB->SenseData); DCDB->CDB[0] = 0x12; /* INQUIRY */ DCDB->CDB[1] = 1; /* EVPD = 1 */ DCDB->CDB[2] = 0x80; /* Page Code */ DCDB->CDB[3] = 0; /* Reserved */ DCDB->CDB[4] = sizeof(DAC960_SCSI_Inquiry_UnitSerialNumber_T); DCDB->CDB[5] = 0; /* Control */ DAC960_AcquireControllerLock(Controller, &ProcessorFlags); DAC960_QueueCommand(Command); DAC960_ReleaseControllerLock(Controller, &ProcessorFlags); wait_for_completion(Completion); } } return true; } /* DAC960_V2_ReadDeviceConfiguration reads the Device Configuration Information for DAC960 V2 Firmware Controllers by requesting the Physical Device Information and SCSI Inquiry Unit Serial Number information for each device connected to Controller. */ static boolean DAC960_V2_ReadDeviceConfiguration(DAC960_Controller_T *Controller) { unsigned char Channel = 0, TargetID = 0, LogicalUnit = 0; unsigned short PhysicalDeviceIndex = 0; while (true) { DAC960_V2_PhysicalDeviceInfo_T *NewPhysicalDeviceInfo = &Controller->V2.NewPhysicalDeviceInformation; DAC960_V2_PhysicalDeviceInfo_T *PhysicalDeviceInfo; DAC960_SCSI_Inquiry_UnitSerialNumber_T *InquiryUnitSerialNumber; DAC960_Command_T *Command; DAC960_V2_CommandMailbox_T *CommandMailbox; if (!DAC960_V2_PhysicalDeviceInfo(Controller, DAC960_V2_GetPhysicalDeviceInfoValid, Channel, TargetID, LogicalUnit, NewPhysicalDeviceInfo, sizeof(DAC960_V2_PhysicalDeviceInfo_T))) break; Channel = NewPhysicalDeviceInfo->Channel; TargetID = NewPhysicalDeviceInfo->TargetID; LogicalUnit = NewPhysicalDeviceInfo->LogicalUnit; PhysicalDeviceInfo = (DAC960_V2_PhysicalDeviceInfo_T *) kmalloc(sizeof(DAC960_V2_PhysicalDeviceInfo_T), GFP_ATOMIC); if (PhysicalDeviceInfo == NULL) return DAC960_Failure(Controller, "PHYSICAL DEVICE ALLOCATION"); Controller->V2.PhysicalDeviceInformation[PhysicalDeviceIndex] = PhysicalDeviceInfo; memcpy(PhysicalDeviceInfo, NewPhysicalDeviceInfo, sizeof(DAC960_V2_PhysicalDeviceInfo_T)); InquiryUnitSerialNumber = (DAC960_SCSI_Inquiry_UnitSerialNumber_T *) kmalloc(sizeof(DAC960_SCSI_Inquiry_UnitSerialNumber_T), GFP_ATOMIC); if (InquiryUnitSerialNumber == NULL) return DAC960_Failure(Controller, "SERIAL NUMBER ALLOCATION"); Controller->V2.InquiryUnitSerialNumber[PhysicalDeviceIndex] = InquiryUnitSerialNumber; memset(InquiryUnitSerialNumber, 0, sizeof(DAC960_SCSI_Inquiry_UnitSerialNumber_T)); InquiryUnitSerialNumber->PeripheralDeviceType = 0x1F; Command = DAC960_AllocateCommand(Controller); CommandMailbox = &Command->V2.CommandMailbox; DAC960_V2_ClearCommand(Command); Command->CommandType = DAC960_ImmediateCommand; CommandMailbox->SCSI_10.CommandOpcode = DAC960_V2_SCSI_10_Passthru; CommandMailbox->SCSI_10.CommandControlBits .DataTransferControllerToHost = true; CommandMailbox->SCSI_10.CommandControlBits .NoAutoRequestSense = true; CommandMailbox->SCSI_10.DataTransferSize = sizeof(DAC960_SCSI_Inquiry_UnitSerialNumber_T); CommandMailbox->SCSI_10.PhysicalDevice.LogicalUnit = LogicalUnit; CommandMailbox->SCSI_10.PhysicalDevice.TargetID = TargetID; CommandMailbox->SCSI_10.PhysicalDevice.Channel = Channel; CommandMailbox->SCSI_10.CDBLength = 6; CommandMailbox->SCSI_10.SCSI_CDB[0] = 0x12; /* INQUIRY */ CommandMailbox->SCSI_10.SCSI_CDB[1] = 1; /* EVPD = 1 */ CommandMailbox->SCSI_10.SCSI_CDB[2] = 0x80; /* Page Code */ CommandMailbox->SCSI_10.SCSI_CDB[3] = 0; /* Reserved */ CommandMailbox->SCSI_10.SCSI_CDB[4] = sizeof(DAC960_SCSI_Inquiry_UnitSerialNumber_T); CommandMailbox->SCSI_10.SCSI_CDB[5] = 0; /* Control */ CommandMailbox->SCSI_10.DataTransferMemoryAddress .ScatterGatherSegments[0] .SegmentDataPointer = Virtual_to_Bus64(InquiryUnitSerialNumber); CommandMailbox->SCSI_10.DataTransferMemoryAddress .ScatterGatherSegments[0] .SegmentByteCount = CommandMailbox->SCSI_10.DataTransferSize; DAC960_ExecuteCommand(Command); DAC960_DeallocateCommand(Command); PhysicalDeviceIndex++; LogicalUnit++; } return true; } /* DAC960_SanitizeInquiryData sanitizes the Vendor, Model, Revision, and Product Serial Number fields of the Inquiry Standard Data and Inquiry Unit Serial Number structures. */ static void DAC960_SanitizeInquiryData(DAC960_SCSI_Inquiry_T *InquiryStandardData, DAC960_SCSI_Inquiry_UnitSerialNumber_T *InquiryUnitSerialNumber, unsigned char *Vendor, unsigned char *Model, unsigned char *Revision, unsigned char *SerialNumber) { int SerialNumberLength, i; if (InquiryStandardData->PeripheralDeviceType == 0x1F) return; for (i = 0; i < sizeof(InquiryStandardData->VendorIdentification); i++) { unsigned char VendorCharacter = InquiryStandardData->VendorIdentification[i]; Vendor[i] = (VendorCharacter >= ' ' && VendorCharacter <= '~' ? VendorCharacter : ' '); } Vendor[sizeof(InquiryStandardData->VendorIdentification)] = '\0'; for (i = 0; i < sizeof(InquiryStandardData->ProductIdentification); i++) { unsigned char ModelCharacter = InquiryStandardData->ProductIdentification[i]; Model[i] = (ModelCharacter >= ' ' && ModelCharacter <= '~' ? ModelCharacter : ' '); } Model[sizeof(InquiryStandardData->ProductIdentification)] = '\0'; for (i = 0; i < sizeof(InquiryStandardData->ProductRevisionLevel); i++) { unsigned char RevisionCharacter = InquiryStandardData->ProductRevisionLevel[i]; Revision[i] = (RevisionCharacter >= ' ' && RevisionCharacter <= '~' ? RevisionCharacter : ' '); } Revision[sizeof(InquiryStandardData->ProductRevisionLevel)] = '\0'; if (InquiryUnitSerialNumber->PeripheralDeviceType == 0x1F) return; SerialNumberLength = InquiryUnitSerialNumber->PageLength; if (SerialNumberLength > sizeof(InquiryUnitSerialNumber->ProductSerialNumber)) SerialNumberLength = sizeof(InquiryUnitSerialNumber->ProductSerialNumber); for (i = 0; i < SerialNumberLength; i++) { unsigned char SerialNumberCharacter = InquiryUnitSerialNumber->ProductSerialNumber[i]; SerialNumber[i] = (SerialNumberCharacter >= ' ' && SerialNumberCharacter <= '~' ? SerialNumberCharacter : ' '); } SerialNumber[SerialNumberLength] = '\0'; } /* DAC960_V1_ReportDeviceConfiguration reports the Device Configuration Information for DAC960 V1 Firmware Controllers. */ static boolean DAC960_V1_ReportDeviceConfiguration(DAC960_Controller_T *Controller) { int LogicalDriveNumber, Channel, TargetID; DAC960_Info(" Physical Devices:\n", Controller); for (Channel = 0; Channel < Controller->Channels; Channel++) for (TargetID = 0; TargetID < Controller->Targets; TargetID++) { DAC960_SCSI_Inquiry_T *InquiryStandardData = &Controller->V1.InquiryStandardData[Channel][TargetID]; DAC960_SCSI_Inquiry_UnitSerialNumber_T *InquiryUnitSerialNumber = &Controller->V1.InquiryUnitSerialNumber[Channel][TargetID]; DAC960_V1_DeviceState_T *DeviceState = &Controller->V1.DeviceState[Channel][TargetID]; DAC960_V1_ErrorTableEntry_T *ErrorEntry = &Controller->V1.ErrorTable.ErrorTableEntries[Channel][TargetID]; char Vendor[1+sizeof(InquiryStandardData->VendorIdentification)]; char Model[1+sizeof(InquiryStandardData->ProductIdentification)]; char Revision[1+sizeof(InquiryStandardData->ProductRevisionLevel)]; char SerialNumber[1+sizeof(InquiryUnitSerialNumber ->ProductSerialNumber)]; if (InquiryStandardData->PeripheralDeviceType == 0x1F) continue; DAC960_SanitizeInquiryData(InquiryStandardData, InquiryUnitSerialNumber, Vendor, Model, Revision, SerialNumber); DAC960_Info(" %d:%d%s Vendor: %s Model: %s Revision: %s\n", Controller, Channel, TargetID, (TargetID < 10 ? " " : ""), Vendor, Model, Revision); if (InquiryUnitSerialNumber->PeripheralDeviceType != 0x1F) DAC960_Info(" Serial Number: %s\n", Controller, SerialNumber); if (DeviceState->Present && DeviceState->DeviceType == DAC960_V1_DiskType) { if (Controller->V1.DeviceResetCount[Channel][TargetID] > 0) DAC960_Info(" Disk Status: %s, %u blocks, %d resets\n", Controller, (DeviceState->DeviceState == DAC960_V1_Device_Dead ? "Dead" : DeviceState->DeviceState == DAC960_V1_Device_WriteOnly ? "Write-Only" : DeviceState->DeviceState == DAC960_V1_Device_Online ? "Online" : "Standby"), DeviceState->DiskSize, Controller->V1.DeviceResetCount[Channel][TargetID]); else DAC960_Info(" Disk Status: %s, %u blocks\n", Controller, (DeviceState->DeviceState == DAC960_V1_Device_Dead ? "Dead" : DeviceState->DeviceState == DAC960_V1_Device_WriteOnly ? "Write-Only" : DeviceState->DeviceState == DAC960_V1_Device_Online ? "Online" : "Standby"), DeviceState->DiskSize); } if (ErrorEntry->ParityErrorCount > 0 || ErrorEntry->SoftErrorCount > 0 || ErrorEntry->HardErrorCount > 0 || ErrorEntry->MiscErrorCount > 0) DAC960_Info(" Errors - Parity: %d, Soft: %d, " "Hard: %d, Misc: %d\n", Controller, ErrorEntry->ParityErrorCount, ErrorEntry->SoftErrorCount, ErrorEntry->HardErrorCount, ErrorEntry->MiscErrorCount); } DAC960_Info(" Logical Drives:\n", Controller); for (LogicalDriveNumber = 0; LogicalDriveNumber < Controller->LogicalDriveCount; LogicalDriveNumber++) { DAC960_V1_LogicalDriveInformation_T *LogicalDriveInformation = &Controller->V1.LogicalDriveInformation[LogicalDriveNumber]; DAC960_Info(" /dev/rd/c%dd%d: RAID-%d, %s, %u blocks, %s\n", Controller, Controller->ControllerNumber, LogicalDriveNumber, LogicalDriveInformation->RAIDLevel, (LogicalDriveInformation->LogicalDriveState == DAC960_V1_LogicalDrive_Online ? "Online" : LogicalDriveInformation->LogicalDriveState == DAC960_V1_LogicalDrive_Critical ? "Critical" : "Offline"), LogicalDriveInformation->LogicalDriveSize, (LogicalDriveInformation->WriteBack ? "Write Back" : "Write Thru")); } return true; } /* DAC960_V2_ReportDeviceConfiguration reports the Device Configuration Information for DAC960 V2 Firmware Controllers. */ static boolean DAC960_V2_ReportDeviceConfiguration(DAC960_Controller_T *Controller) { int PhysicalDeviceIndex, LogicalDriveNumber; DAC960_Info(" Physical Devices:\n", Controller); for (PhysicalDeviceIndex = 0; PhysicalDeviceIndex < DAC960_V2_MaxPhysicalDevices; PhysicalDeviceIndex++) { DAC960_V2_PhysicalDeviceInfo_T *PhysicalDeviceInfo = Controller->V2.PhysicalDeviceInformation[PhysicalDeviceIndex]; DAC960_SCSI_Inquiry_T *InquiryStandardData = (DAC960_SCSI_Inquiry_T *) &PhysicalDeviceInfo->SCSI_InquiryData; DAC960_SCSI_Inquiry_UnitSerialNumber_T *InquiryUnitSerialNumber = Controller->V2.InquiryUnitSerialNumber[PhysicalDeviceIndex]; char Vendor[1+sizeof(InquiryStandardData->VendorIdentification)]; char Model[1+sizeof(InquiryStandardData->ProductIdentification)]; char Revision[1+sizeof(InquiryStandardData->ProductRevisionLevel)]; char SerialNumber[1+sizeof(InquiryUnitSerialNumber->ProductSerialNumber)]; if (PhysicalDeviceInfo == NULL) break; DAC960_SanitizeInquiryData(InquiryStandardData, InquiryUnitSerialNumber, Vendor, Model, Revision, SerialNumber); DAC960_Info(" %d:%d%s Vendor: %s Model: %s Revision: %s\n", Controller, PhysicalDeviceInfo->Channel, PhysicalDeviceInfo->TargetID, (PhysicalDeviceInfo->TargetID < 10 ? " " : ""), Vendor, Model, Revision); if (PhysicalDeviceInfo->NegotiatedSynchronousMegaTransfers == 0) DAC960_Info(" %sAsynchronous\n", Controller, (PhysicalDeviceInfo->NegotiatedDataWidthBits == 16 ? "Wide " :"")); else DAC960_Info(" %sSynchronous at %d MB/sec\n", Controller, (PhysicalDeviceInfo->NegotiatedDataWidthBits == 16 ? "Wide " :""), (PhysicalDeviceInfo->NegotiatedSynchronousMegaTransfers * (PhysicalDeviceInfo->NegotiatedDataWidthBits == 16 ? 2 : 1))); if (InquiryUnitSerialNumber->PeripheralDeviceType != 0x1F) DAC960_Info(" Serial Number: %s\n", Controller, SerialNumber); if (PhysicalDeviceInfo->PhysicalDeviceState == DAC960_V2_Device_Unconfigured) continue; DAC960_Info(" Disk Status: %s, %u blocks\n", Controller, (PhysicalDeviceInfo->PhysicalDeviceState == DAC960_V2_Device_Online ? "Online" : PhysicalDeviceInfo->PhysicalDeviceState == DAC960_V2_Device_Rebuild ? "Rebuild" : PhysicalDeviceInfo->PhysicalDeviceState == DAC960_V2_Device_Missing ? "Missing" : PhysicalDeviceInfo->PhysicalDeviceState == DAC960_V2_Device_Critical ? "Critical" : PhysicalDeviceInfo->PhysicalDeviceState == DAC960_V2_Device_Dead ? "Dead" : PhysicalDeviceInfo->PhysicalDeviceState == DAC960_V2_Device_SuspectedDead ? "Suspected-Dead" : PhysicalDeviceInfo->PhysicalDeviceState == DAC960_V2_Device_CommandedOffline ? "Commanded-Offline" : PhysicalDeviceInfo->PhysicalDeviceState == DAC960_V2_Device_Standby ? "Standby" : "Unknown"), PhysicalDeviceInfo->ConfigurableDeviceSize); if (PhysicalDeviceInfo->ParityErrors == 0 && PhysicalDeviceInfo->SoftErrors == 0 && PhysicalDeviceInfo->HardErrors == 0 && PhysicalDeviceInfo->MiscellaneousErrors == 0 && PhysicalDeviceInfo->CommandTimeouts == 0 && PhysicalDeviceInfo->Retries == 0 && PhysicalDeviceInfo->Aborts == 0 && PhysicalDeviceInfo->PredictedFailuresDetected == 0) continue; DAC960_Info(" Errors - Parity: %d, Soft: %d, " "Hard: %d, Misc: %d\n", Controller, PhysicalDeviceInfo->ParityErrors, PhysicalDeviceInfo->SoftErrors, PhysicalDeviceInfo->HardErrors, PhysicalDeviceInfo->MiscellaneousErrors); DAC960_Info(" Timeouts: %d, Retries: %d, " "Aborts: %d, Predicted: %d\n", Controller, PhysicalDeviceInfo->CommandTimeouts, PhysicalDeviceInfo->Retries, PhysicalDeviceInfo->Aborts, PhysicalDeviceInfo->PredictedFailuresDetected); } DAC960_Info(" Logical Drives:\n", Controller); for (LogicalDriveNumber = 0; LogicalDriveNumber < DAC960_MaxLogicalDrives; LogicalDriveNumber++) { DAC960_V2_LogicalDeviceInfo_T *LogicalDeviceInfo = Controller->V2.LogicalDeviceInformation[LogicalDriveNumber]; unsigned char *ReadCacheStatus[] = { "Read Cache Disabled", "Read Cache Enabled", "Read Ahead Enabled", "Intelligent Read Ahead Enabled", "-", "-", "-", "-" }; unsigned char *WriteCacheStatus[] = { "Write Cache Disabled", "Logical Device Read Only", "Write Cache Enabled", "Intelligent Write Cache Enabled", "-", "-", "-", "-" }; unsigned char *GeometryTranslation; if (LogicalDeviceInfo == NULL) continue; switch (LogicalDeviceInfo->DriveGeometry) { case DAC960_V2_Geometry_128_32: GeometryTranslation = "128/32"; break; case DAC960_V2_Geometry_255_63: GeometryTranslation = "255/63"; break; default: GeometryTranslation = "Invalid"; DAC960_Error("Illegal Logical Device Geometry %d\n", Controller, LogicalDeviceInfo->DriveGeometry); break; } DAC960_Info(" /dev/rd/c%dd%d: RAID-%d, %s, %u blocks\n", Controller, Controller->ControllerNumber, LogicalDriveNumber, LogicalDeviceInfo->RAIDLevel, (LogicalDeviceInfo->LogicalDeviceState == DAC960_V2_LogicalDevice_Online ? "Online" : LogicalDeviceInfo->LogicalDeviceState == DAC960_V2_LogicalDevice_Critical ? "Critical" : "Offline"), LogicalDeviceInfo->ConfigurableDeviceSize); DAC960_Info(" Logical Device %s, BIOS Geometry: %s\n", Controller, (LogicalDeviceInfo->LogicalDeviceControl .LogicalDeviceInitialized ? "Initialized" : "Uninitialized"), GeometryTranslation); if (LogicalDeviceInfo->StripeSize == 0) { if (LogicalDeviceInfo->CacheLineSize == 0) DAC960_Info(" Stripe Size: N/A, " "Segment Size: N/A\n", Controller); else DAC960_Info(" Stripe Size: N/A, " "Segment Size: %dKB\n", Controller, 1 << (LogicalDeviceInfo->CacheLineSize - 2)); } else { if (LogicalDeviceInfo->CacheLineSize == 0) DAC960_Info(" Stripe Size: %dKB, " "Segment Size: N/A\n", Controller, 1 << (LogicalDeviceInfo->StripeSize - 2)); else DAC960_Info(" Stripe Size: %dKB, " "Segment Size: %dKB\n", Controller, 1 << (LogicalDeviceInfo->StripeSize - 2), 1 << (LogicalDeviceInfo->CacheLineSize - 2)); } DAC960_Info(" %s, %s\n", Controller, ReadCacheStatus[ LogicalDeviceInfo->LogicalDeviceControl.ReadCache], WriteCacheStatus[ LogicalDeviceInfo->LogicalDeviceControl.WriteCache]); if (LogicalDeviceInfo->SoftErrors > 0 || LogicalDeviceInfo->CommandsFailed > 0 || LogicalDeviceInfo->DeferredWriteErrors) DAC960_Info(" Errors - Soft: %d, Failed: %d, " "Deferred Write: %d\n", Controller, LogicalDeviceInfo->SoftErrors, LogicalDeviceInfo->CommandsFailed, LogicalDeviceInfo->DeferredWriteErrors); } return true; } /* DAC960_BackMergeFunction is the Back Merge Function for the DAC960 driver. */ static int DAC960_BackMergeFunction(RequestQueue_T *RequestQueue, IO_Request_T *Request, BufferHeader_T *BufferHeader, int MaxSegments) { DAC960_Controller_T *Controller = (DAC960_Controller_T *) RequestQueue->queuedata; if (Request->bhtail->b_data + Request->bhtail->b_size == BufferHeader->b_data) return true; if (Request->nr_segments < MaxSegments && Request->nr_segments < Controller->DriverScatterGatherLimit) { Request->nr_segments++; return true; } return false; } /* DAC960_FrontMergeFunction is the Front Merge Function for the DAC960 driver. */ static int DAC960_FrontMergeFunction(RequestQueue_T *RequestQueue, IO_Request_T *Request, BufferHeader_T *BufferHeader, int MaxSegments) { DAC960_Controller_T *Controller = (DAC960_Controller_T *) RequestQueue->queuedata; if (BufferHeader->b_data + BufferHeader->b_size == Request->bh->b_data) return true; if (Request->nr_segments < MaxSegments && Request->nr_segments < Controller->DriverScatterGatherLimit) { Request->nr_segments++; return true; } return false; } /* DAC960_MergeRequestsFunction is the Merge Requests Function for the DAC960 driver. */ static int DAC960_MergeRequestsFunction(RequestQueue_T *RequestQueue, IO_Request_T *Request, IO_Request_T *NextRequest, int MaxSegments) { DAC960_Controller_T *Controller = (DAC960_Controller_T *) RequestQueue->queuedata; int TotalSegments = Request->nr_segments + NextRequest->nr_segments; if (Request->bhtail->b_data + Request->bhtail->b_size == NextRequest->bh->b_data) TotalSegments--; if (TotalSegments > MaxSegments || TotalSegments > Controller->DriverScatterGatherLimit) return false; Request->nr_segments = TotalSegments; return true; } /* DAC960_RegisterBlockDevice registers the Block Device structures associated with Controller. */ static boolean DAC960_RegisterBlockDevice(DAC960_Controller_T *Controller) { int MajorNumber = DAC960_MAJOR + Controller->ControllerNumber; RequestQueue_T *RequestQueue; int MinorNumber; /* Register the Block Device Major Number for this DAC960 Controller. */ if (devfs_register_blkdev(MajorNumber, "dac960", &DAC960_BlockDeviceOperations) < 0) { DAC960_Error("UNABLE TO ACQUIRE MAJOR NUMBER %d - DETACHING\n", Controller, MajorNumber); return false; } /* Initialize the I/O Request Queue. */ RequestQueue = BLK_DEFAULT_QUEUE(MajorNumber); blk_init_queue(RequestQueue, DAC960_RequestFunction); blk_queue_headactive(RequestQueue, 0); RequestQueue->back_merge_fn = DAC960_BackMergeFunction; RequestQueue->front_merge_fn = DAC960_FrontMergeFunction; RequestQueue->merge_requests_fn = DAC960_MergeRequestsFunction; RequestQueue->queuedata = Controller; Controller->RequestQueue = RequestQueue; /* Initialize the Max Sectors per Request array. */ for (MinorNumber = 0; MinorNumber < DAC960_MinorCount; MinorNumber++) Controller->MaxSectorsPerRequest[MinorNumber] = Controller->MaxBlocksPerCommand; Controller->GenericDiskInfo.part = Controller->DiskPartitions; Controller->GenericDiskInfo.sizes = Controller->PartitionSizes; blksize_size[MajorNumber] = Controller->BlockSizes; max_sectors[MajorNumber] = Controller->MaxSectorsPerRequest; /* Initialize Read Ahead to 128 sectors. */ read_ahead[MajorNumber] = 128; /* Complete initialization of the Generic Disk Information structure. */ Controller->GenericDiskInfo.major = MajorNumber; Controller->GenericDiskInfo.major_name = "rd"; Controller->GenericDiskInfo.minor_shift = DAC960_MaxPartitionsBits; Controller->GenericDiskInfo.max_p = DAC960_MaxPartitions; Controller->GenericDiskInfo.nr_real = DAC960_MaxLogicalDrives; Controller->GenericDiskInfo.real_devices = Controller; Controller->GenericDiskInfo.next = NULL; Controller->GenericDiskInfo.fops = &DAC960_BlockDeviceOperations; /* Install the Generic Disk Information structure at the end of the list. */ add_gendisk(&Controller->GenericDiskInfo); /* Indicate the Block Device Registration completed successfully, */ return true; } /* DAC960_UnregisterBlockDevice unregisters the Block Device structures associated with Controller. */ static void DAC960_UnregisterBlockDevice(DAC960_Controller_T *Controller) { int MajorNumber = DAC960_MAJOR + Controller->ControllerNumber; /* Unregister the Block Device Major Number for this DAC960 Controller. */ devfs_unregister_blkdev(MajorNumber, "dac960"); /* Remove the I/O Request Queue. */ blk_cleanup_queue(BLK_DEFAULT_QUEUE(MajorNumber)); /* Remove the Disk Partitions array, Partition Sizes array, Block Sizes array, Max Sectors per Request array, and Max Segments per Request array. */ Controller->GenericDiskInfo.part = NULL; Controller->GenericDiskInfo.sizes = NULL; blk_size[MajorNumber] = NULL; blksize_size[MajorNumber] = NULL; max_sectors[MajorNumber] = NULL; /* Remove the Generic Disk Information structure from the list. */ del_gendisk(&Controller->GenericDiskInfo); } /* DAC960_ComputeGenericDiskInfo computes the values for the Generic Disk Information Partition Sector Counts and Block Sizes. */ static void DAC960_ComputeGenericDiskInfo(GenericDiskInfo_T *GenericDiskInfo) { DAC960_Controller_T *Controller = (DAC960_Controller_T *) GenericDiskInfo->real_devices; int LogicalDriveNumber, i; for (LogicalDriveNumber = 0; LogicalDriveNumber < DAC960_MaxLogicalDrives; LogicalDriveNumber++) { int MinorNumber = DAC960_MinorNumber(LogicalDriveNumber, 0); if (Controller->FirmwareType == DAC960_V1_Controller) { if (LogicalDriveNumber < Controller->LogicalDriveCount) GenericDiskInfo->part[MinorNumber].nr_sects = Controller->V1.LogicalDriveInformation [LogicalDriveNumber].LogicalDriveSize; else GenericDiskInfo->part[MinorNumber].nr_sects = 0; } else { DAC960_V2_LogicalDeviceInfo_T *LogicalDeviceInfo = Controller->V2.LogicalDeviceInformation[LogicalDriveNumber]; if (LogicalDeviceInfo != NULL) GenericDiskInfo->part[MinorNumber].nr_sects = LogicalDeviceInfo->ConfigurableDeviceSize; else GenericDiskInfo->part[MinorNumber].nr_sects = 0; } for (i = 0; i < DAC960_MaxPartitions; i++) if (GenericDiskInfo->part[MinorNumber].nr_sects > 0) Controller->BlockSizes[MinorNumber + i] = BLOCK_SIZE; else Controller->BlockSizes[MinorNumber + i] = 0; } } /* DAC960_RegisterDisk registers the DAC960 Logical Disk Device for Logical Drive Number if it exists. */ static void DAC960_RegisterDisk(DAC960_Controller_T *Controller, int LogicalDriveNumber) { if (Controller->FirmwareType == DAC960_V1_Controller) { if (LogicalDriveNumber > Controller->LogicalDriveCount - 1) return; register_disk(&Controller->GenericDiskInfo, DAC960_KernelDevice(Controller->ControllerNumber, LogicalDriveNumber, 0), DAC960_MaxPartitions, &DAC960_BlockDeviceOperations, Controller->V1.LogicalDriveInformation [LogicalDriveNumber].LogicalDriveSize); } else { DAC960_V2_LogicalDeviceInfo_T *LogicalDeviceInfo = Controller->V2.LogicalDeviceInformation[LogicalDriveNumber]; if (LogicalDeviceInfo == NULL) return; register_disk(&Controller->GenericDiskInfo, DAC960_KernelDevice(Controller->ControllerNumber, LogicalDriveNumber, 0), DAC960_MaxPartitions, &DAC960_BlockDeviceOperations, LogicalDeviceInfo->ConfigurableDeviceSize); } } /* DAC960_ReportErrorStatus reports Controller BIOS Messages passed through the Error Status Register when the driver performs the BIOS handshaking. It returns true for fatal errors and false otherwise. */ static boolean DAC960_ReportErrorStatus(DAC960_Controller_T *Controller, unsigned char ErrorStatus, unsigned char Parameter0, unsigned char Parameter1) { switch (ErrorStatus) { case 0x00: DAC960_Notice("Physical Device %d:%d Not Responding\n", Controller, Parameter1, Parameter0); break; case 0x08: if (Controller->DriveSpinUpMessageDisplayed) break; DAC960_Notice("Spinning Up Drives\n", Controller); Controller->DriveSpinUpMessageDisplayed = true; break; case 0x30: DAC960_Notice("Configuration Checksum Error\n", Controller); break; case 0x60: DAC960_Notice("Mirror Race Recovery Failed\n", Controller); break; case 0x70: DAC960_Notice("Mirror Race Recovery In Progress\n", Controller); break; case 0x90: DAC960_Notice("Physical Device %d:%d COD Mismatch\n", Controller, Parameter1, Parameter0); break; case 0xA0: DAC960_Notice("Logical Drive Installation Aborted\n", Controller); break; case 0xB0: DAC960_Notice("Mirror Race On A Critical Logical Drive\n", Controller); break; case 0xD0: DAC960_Notice("New Controller Configuration Found\n", Controller); break; case 0xF0: DAC960_Error("Fatal Memory Parity Error for Controller at\n", Controller); return true; default: DAC960_Error("Unknown Initialization Error %02X for Controller at\n", Controller, ErrorStatus); return true; } return false; } /* DAC960_DetectControllers detects Mylex DAC960/AcceleRAID/eXtremeRAID PCI RAID Controllers by interrogating the PCI Configuration Space for Controller Type. */ static void DAC960_DetectControllers(DAC960_HardwareType_T HardwareType) { void (*InterruptHandler)(int, void *, Registers_T *) = NULL; DAC960_FirmwareType_T FirmwareType = 0; unsigned short VendorID = 0, DeviceID = 0; unsigned int MemoryWindowSize = 0; PCI_Device_T *PCI_Device = NULL; switch (HardwareType) { case DAC960_BA_Controller: VendorID = PCI_VENDOR_ID_MYLEX; DeviceID = PCI_DEVICE_ID_MYLEX_DAC960_BA; FirmwareType = DAC960_V2_Controller; InterruptHandler = DAC960_BA_InterruptHandler; MemoryWindowSize = DAC960_BA_RegisterWindowSize; break; case DAC960_LP_Controller: VendorID = PCI_VENDOR_ID_MYLEX; DeviceID = PCI_DEVICE_ID_MYLEX_DAC960_LP; FirmwareType = DAC960_LP_Controller; InterruptHandler = DAC960_LP_InterruptHandler; MemoryWindowSize = DAC960_LP_RegisterWindowSize; break; case DAC960_LA_Controller: VendorID = PCI_VENDOR_ID_DEC; DeviceID = PCI_DEVICE_ID_DEC_21285; FirmwareType = DAC960_V1_Controller; InterruptHandler = DAC960_LA_InterruptHandler; MemoryWindowSize = DAC960_LA_RegisterWindowSize; break; case DAC960_PG_Controller: VendorID = PCI_VENDOR_ID_MYLEX; DeviceID = PCI_DEVICE_ID_MYLEX_DAC960_PG; FirmwareType = DAC960_V1_Controller; InterruptHandler = DAC960_PG_InterruptHandler; MemoryWindowSize = DAC960_PG_RegisterWindowSize; break; case DAC960_PD_Controller: VendorID = PCI_VENDOR_ID_MYLEX; DeviceID = PCI_DEVICE_ID_MYLEX_DAC960_PD; FirmwareType = DAC960_V1_Controller; InterruptHandler = DAC960_PD_InterruptHandler; MemoryWindowSize = DAC960_PD_RegisterWindowSize; break; case DAC960_P_Controller: VendorID = PCI_VENDOR_ID_MYLEX; DeviceID = PCI_DEVICE_ID_MYLEX_DAC960_P; FirmwareType = DAC960_V1_Controller; InterruptHandler = DAC960_P_InterruptHandler; MemoryWindowSize = DAC960_PD_RegisterWindowSize; break; } while ((PCI_Device = pci_find_device(VendorID, DeviceID, PCI_Device)) != NULL) { DAC960_Controller_T *Controller = NULL; DAC960_IO_Address_T IO_Address = 0; DAC960_PCI_Address_T PCI_Address = 0; unsigned char Bus = PCI_Device->bus->number; unsigned char DeviceFunction = PCI_Device->devfn; unsigned char Device = DeviceFunction >> 3; unsigned char Function = DeviceFunction & 0x7; unsigned char ErrorStatus, Parameter0, Parameter1; unsigned int IRQ_Channel = PCI_Device->irq; void *BaseAddress; if (pci_enable_device(PCI_Device) != 0) continue; switch (HardwareType) { case DAC960_BA_Controller: PCI_Address = pci_resource_start(PCI_Device, 0); break; case DAC960_LP_Controller: PCI_Address = pci_resource_start(PCI_Device, 0); break; case DAC960_LA_Controller: if (!(PCI_Device->subsystem_vendor == PCI_VENDOR_ID_MYLEX && PCI_Device->subsystem_device == PCI_DEVICE_ID_MYLEX_DAC960_LA)) continue; PCI_Address = pci_resource_start(PCI_Device, 0); break; case DAC960_PG_Controller: PCI_Address = pci_resource_start(PCI_Device, 0); break; case DAC960_PD_Controller: IO_Address = pci_resource_start(PCI_Device, 0); PCI_Address = pci_resource_start(PCI_Device, 1); break; case DAC960_P_Controller: IO_Address = pci_resource_start(PCI_Device, 0); PCI_Address = pci_resource_start(PCI_Device, 1); break; } if (DAC960_ControllerCount == DAC960_MaxControllers) { DAC960_Error("More than %d DAC960 Controllers detected - " "ignoring from Controller at\n", NULL, DAC960_MaxControllers); goto Failure; } Controller = (DAC960_Controller_T *) kmalloc(sizeof(DAC960_Controller_T), GFP_ATOMIC); if (Controller == NULL) { DAC960_Error("Unable to allocate Controller structure for " "Controller at\n", NULL); goto Failure; } memset(Controller, 0, sizeof(DAC960_Controller_T)); Controller->ControllerNumber = DAC960_ControllerCount; init_waitqueue_head(&Controller->CommandWaitQueue); init_waitqueue_head(&Controller->HealthStatusWaitQueue); DAC960_Controllers[DAC960_ControllerCount++] = Controller; DAC960_AnnounceDriver(Controller); Controller->FirmwareType = FirmwareType; Controller->HardwareType = HardwareType; Controller->IO_Address = IO_Address; Controller->PCI_Address = PCI_Address; Controller->Bus = Bus; Controller->Device = Device; Controller->Function = Function; /* Map the Controller Register Window. */ if (MemoryWindowSize < PAGE_SIZE) MemoryWindowSize = PAGE_SIZE; Controller->MemoryMappedAddress = ioremap_nocache(PCI_Address & PAGE_MASK, MemoryWindowSize); Controller->BaseAddress = Controller->MemoryMappedAddress + (PCI_Address & ~PAGE_MASK); if (Controller->MemoryMappedAddress == NULL) { DAC960_Error("Unable to map Controller Register Window for " "Controller at\n", Controller); goto Failure; } BaseAddress = Controller->BaseAddress; switch (HardwareType) { case DAC960_BA_Controller: DAC960_BA_DisableInterrupts(Controller->BaseAddress); DAC960_BA_AcknowledgeHardwareMailboxStatus(BaseAddress); udelay(1000); while (DAC960_BA_InitializationInProgressP(BaseAddress)) { if (DAC960_BA_ReadErrorStatus(BaseAddress, &ErrorStatus, &Parameter0, &Parameter1) && DAC960_ReportErrorStatus(Controller, ErrorStatus, Parameter0, Parameter1)) goto Failure; udelay(10); } if (!DAC960_V2_EnableMemoryMailboxInterface(Controller)) { DAC960_Error("Unable to Enable Memory Mailbox Interface " "for Controller at\n", Controller); goto Failure; } DAC960_BA_EnableInterrupts(Controller->BaseAddress); Controller->QueueCommand = DAC960_BA_QueueCommand; Controller->ReadControllerConfiguration = DAC960_V2_ReadControllerConfiguration; Controller->ReadDeviceConfiguration = DAC960_V2_ReadDeviceConfiguration; Controller->ReportDeviceConfiguration = DAC960_V2_ReportDeviceConfiguration; Controller->QueueReadWriteCommand = DAC960_V2_QueueReadWriteCommand; break; case DAC960_LP_Controller: DAC960_LP_DisableInterrupts(Controller->BaseAddress); DAC960_LP_AcknowledgeHardwareMailboxStatus(BaseAddress); udelay(1000); while (DAC960_LP_InitializationInProgressP(BaseAddress)) { if (DAC960_LP_ReadErrorStatus(BaseAddress, &ErrorStatus, &Parameter0, &Parameter1) && DAC960_ReportErrorStatus(Controller, ErrorStatus, Parameter0, Parameter1)) goto Failure; udelay(10); } if (!DAC960_V2_EnableMemoryMailboxInterface(Controller)) { DAC960_Error("Unable to Enable Memory Mailbox Interface " "for Controller at\n", Controller); goto Failure; } DAC960_LP_EnableInterrupts(Controller->BaseAddress); Controller->QueueCommand = DAC960_LP_QueueCommand; Controller->ReadControllerConfiguration = DAC960_V2_ReadControllerConfiguration; Controller->ReadDeviceConfiguration = DAC960_V2_ReadDeviceConfiguration; Controller->ReportDeviceConfiguration = DAC960_V2_ReportDeviceConfiguration; Controller->QueueReadWriteCommand = DAC960_V2_QueueReadWriteCommand; break; case DAC960_LA_Controller: DAC960_LA_DisableInterrupts(Controller->BaseAddress); DAC960_LA_AcknowledgeHardwareMailboxStatus(BaseAddress); udelay(1000); while (DAC960_LA_InitializationInProgressP(BaseAddress)) { if (DAC960_LA_ReadErrorStatus(BaseAddress, &ErrorStatus, &Parameter0, &Parameter1) && DAC960_ReportErrorStatus(Controller, ErrorStatus, Parameter0, Parameter1)) goto Failure; udelay(10); } if (!DAC960_V1_EnableMemoryMailboxInterface(Controller)) { DAC960_Error("Unable to Enable Memory Mailbox Interface " "for Controller at\n", Controller); goto Failure; } DAC960_LA_EnableInterrupts(Controller->BaseAddress); if (Controller->V1.DualModeMemoryMailboxInterface) Controller->QueueCommand = DAC960_LA_QueueCommandDualMode; else Controller->QueueCommand = DAC960_LA_QueueCommandSingleMode; Controller->ReadControllerConfiguration = DAC960_V1_ReadControllerConfiguration; Controller->ReadDeviceConfiguration = DAC960_V1_ReadDeviceConfiguration; Controller->ReportDeviceConfiguration = DAC960_V1_ReportDeviceConfiguration; Controller->QueueReadWriteCommand = DAC960_V1_QueueReadWriteCommand; break; case DAC960_PG_Controller: DAC960_PG_DisableInterrupts(Controller->BaseAddress); DAC960_PG_AcknowledgeHardwareMailboxStatus(BaseAddress); udelay(1000); while (DAC960_PG_InitializationInProgressP(BaseAddress)) { if (DAC960_PG_ReadErrorStatus(BaseAddress, &ErrorStatus, &Parameter0, &Parameter1) && DAC960_ReportErrorStatus(Controller, ErrorStatus, Parameter0, Parameter1)) goto Failure; udelay(10); } if (!DAC960_V1_EnableMemoryMailboxInterface(Controller)) { DAC960_Error("Unable to Enable Memory Mailbox Interface " "for Controller at\n", Controller); goto Failure; } DAC960_PG_EnableInterrupts(Controller->BaseAddress); if (Controller->V1.DualModeMemoryMailboxInterface) Controller->QueueCommand = DAC960_PG_QueueCommandDualMode; else Controller->QueueCommand = DAC960_PG_QueueCommandSingleMode; Controller->ReadControllerConfiguration = DAC960_V1_ReadControllerConfiguration; Controller->ReadDeviceConfiguration = DAC960_V1_ReadDeviceConfiguration; Controller->ReportDeviceConfiguration = DAC960_V1_ReportDeviceConfiguration; Controller->QueueReadWriteCommand = DAC960_V1_QueueReadWriteCommand; break; case DAC960_PD_Controller: if (!request_region(Controller->IO_Address, 0x80, Controller->FullModelName)) { DAC960_Error("IO port 0x%d busy for Controller at\n", Controller, Controller->IO_Address); goto Failure; } DAC960_PD_DisableInterrupts(BaseAddress); DAC960_PD_AcknowledgeStatus(BaseAddress); udelay(1000); while (DAC960_PD_InitializationInProgressP(BaseAddress)) { if (DAC960_PD_ReadErrorStatus(BaseAddress, &ErrorStatus, &Parameter0, &Parameter1) && DAC960_ReportErrorStatus(Controller, ErrorStatus, Parameter0, Parameter1)) goto Failure1; udelay(10); } DAC960_PD_EnableInterrupts(Controller->BaseAddress); Controller->QueueCommand = DAC960_PD_QueueCommand; Controller->ReadControllerConfiguration = DAC960_V1_ReadControllerConfiguration; Controller->ReadDeviceConfiguration = DAC960_V1_ReadDeviceConfiguration; Controller->ReportDeviceConfiguration = DAC960_V1_ReportDeviceConfiguration; Controller->QueueReadWriteCommand = DAC960_V1_QueueReadWriteCommand; break; case DAC960_P_Controller: if (!request_region(Controller->IO_Address, 0x80, Controller->FullModelName)){ DAC960_Error("IO port 0x%d busy for Controller at\n", Controller, Controller->IO_Address); goto Failure; } DAC960_PD_DisableInterrupts(BaseAddress); DAC960_PD_AcknowledgeStatus(BaseAddress); udelay(1000); while (DAC960_PD_InitializationInProgressP(BaseAddress)) { if (DAC960_PD_ReadErrorStatus(BaseAddress, &ErrorStatus, &Parameter0, &Parameter1) && DAC960_ReportErrorStatus(Controller, ErrorStatus, Parameter0, Parameter1)) goto Failure1; udelay(10); } DAC960_PD_EnableInterrupts(Controller->BaseAddress); Controller->QueueCommand = DAC960_P_QueueCommand; Controller->ReadControllerConfiguration = DAC960_V1_ReadControllerConfiguration; Controller->ReadDeviceConfiguration = DAC960_V1_ReadDeviceConfiguration; Controller->ReportDeviceConfiguration = DAC960_V1_ReportDeviceConfiguration; Controller->QueueReadWriteCommand = DAC960_V1_QueueReadWriteCommand; break; } /* Acquire shared access to the IRQ Channel. */ if (IRQ_Channel == 0) { DAC960_Error("IRQ Channel %d illegal for Controller at\n", Controller, IRQ_Channel); goto Failure1; } strcpy(Controller->FullModelName, "DAC960"); if (request_irq(IRQ_Channel, InterruptHandler, SA_SHIRQ, Controller->FullModelName, Controller) < 0) { DAC960_Error("Unable to acquire IRQ Channel %d for Controller at\n", Controller, IRQ_Channel); goto Failure1; } Controller->IRQ_Channel = IRQ_Channel; DAC960_ActiveControllerCount++; Controller->InitialCommand.CommandIdentifier = 1; Controller->InitialCommand.Controller = Controller; Controller->Commands[0] = &Controller->InitialCommand; Controller->FreeCommands = &Controller->InitialCommand; Controller->ControllerDetectionSuccessful = true; continue; Failure1: if (Controller->IO_Address) release_region(Controller->IO_Address, 0x80); Failure: if (IO_Address == 0) DAC960_Error("PCI Bus %d Device %d Function %d I/O Address N/A " "PCI Address 0x%X\n", Controller, Bus, Device, Function, PCI_Address); else DAC960_Error("PCI Bus %d Device %d Function %d I/O Address " "0x%X PCI Address 0x%X\n", Controller, Bus, Device, Function, IO_Address, PCI_Address); if (Controller == NULL) break; if (Controller->MemoryMappedAddress != NULL) iounmap(Controller->MemoryMappedAddress); if (Controller->IRQ_Channel > 0) free_irq(IRQ_Channel, Controller); } } /* DAC960_SortControllers sorts the Controllers by PCI Bus and Device Number. */ static void DAC960_SortControllers(void) { int ControllerNumber, LastInterchange, Bound, j; LastInterchange = DAC960_ControllerCount-1; while (LastInterchange > 0) { Bound = LastInterchange; LastInterchange = 0; for (j = 0; j < Bound; j++) { DAC960_Controller_T *Controller1 = DAC960_Controllers[j]; DAC960_Controller_T *Controller2 = DAC960_Controllers[j+1]; if (Controller1->Bus > Controller2->Bus || (Controller1->Bus == Controller2->Bus && (Controller1->Device > Controller2->Device))) { Controller2->ControllerNumber = j; DAC960_Controllers[j] = Controller2; Controller1->ControllerNumber = j+1; DAC960_Controllers[j+1] = Controller1; LastInterchange = j; } } } for (ControllerNumber = 0; ControllerNumber < DAC960_ControllerCount; ControllerNumber++) { DAC960_Controller_T *Controller = DAC960_Controllers[ControllerNumber]; if (!Controller->ControllerDetectionSuccessful) { DAC960_Controllers[ControllerNumber] = NULL; kfree(Controller); } } } /* DAC960_InitializeController initializes Controller. */ static void DAC960_InitializeController(DAC960_Controller_T *Controller) { if (DAC960_ReadControllerConfiguration(Controller) && DAC960_ReportControllerConfiguration(Controller) && DAC960_CreateAuxiliaryStructures(Controller) && DAC960_ReadDeviceConfiguration(Controller) && DAC960_ReportDeviceConfiguration(Controller) && DAC960_RegisterBlockDevice(Controller)) { /* Initialize the Monitoring Timer. */ init_timer(&Controller->MonitoringTimer); Controller->MonitoringTimer.expires = jiffies + DAC960_MonitoringTimerInterval; Controller->MonitoringTimer.data = (unsigned long) Controller; Controller->MonitoringTimer.function = DAC960_MonitoringTimerFunction; add_timer(&Controller->MonitoringTimer); Controller->ControllerInitialized = true; } else DAC960_FinalizeController(Controller); } /* DAC960_FinalizeController finalizes Controller. */ static void DAC960_FinalizeController(DAC960_Controller_T *Controller) { if (Controller->ControllerInitialized) { del_timer(&Controller->MonitoringTimer); if (Controller->FirmwareType == DAC960_V1_Controller) { DAC960_Notice("Flushing Cache...", Controller); DAC960_V1_ExecuteType3(Controller, DAC960_V1_Flush, NULL); DAC960_Notice("done\n", Controller); switch (Controller->HardwareType) { case DAC960_LA_Controller: if (Controller->V1.DualModeMemoryMailboxInterface) free_pages(Controller->MemoryMailboxPagesAddress, Controller->MemoryMailboxPagesOrder); else DAC960_LA_SaveMemoryMailboxInfo(Controller); break; case DAC960_PG_Controller: if (Controller->V1.DualModeMemoryMailboxInterface) free_pages(Controller->MemoryMailboxPagesAddress, Controller->MemoryMailboxPagesOrder); else DAC960_PG_SaveMemoryMailboxInfo(Controller); break; case DAC960_PD_Controller: release_region(Controller->IO_Address, 0x80); break; default: break; } } else { DAC960_Notice("Flushing Cache...", Controller); DAC960_V2_DeviceOperation(Controller, DAC960_V2_PauseDevice, DAC960_V2_RAID_Controller); DAC960_Notice("done\n", Controller); free_pages(Controller->MemoryMailboxPagesAddress, Controller->MemoryMailboxPagesOrder); } } free_irq(Controller->IRQ_Channel, Controller); iounmap(Controller->MemoryMappedAddress); DAC960_UnregisterBlockDevice(Controller); DAC960_DestroyAuxiliaryStructures(Controller); DAC960_Controllers[Controller->ControllerNumber] = NULL; kfree(Controller); } /* DAC960_Initialize initializes the DAC960 Driver. */ static int DAC960_Initialize(void) { int ControllerNumber; DAC960_DetectControllers(DAC960_BA_Controller); DAC960_DetectControllers(DAC960_LP_Controller); DAC960_DetectControllers(DAC960_LA_Controller); DAC960_DetectControllers(DAC960_PG_Controller); DAC960_DetectControllers(DAC960_PD_Controller); DAC960_DetectControllers(DAC960_P_Controller); DAC960_SortControllers(); if (DAC960_ActiveControllerCount == 0) return -ENODEV; for (ControllerNumber = 0; ControllerNumber < DAC960_ControllerCount; ControllerNumber++) { DAC960_Controller_T *Controller = DAC960_Controllers[ControllerNumber]; int LogicalDriveNumber; if (Controller == NULL) continue; DAC960_InitializeController(Controller); DAC960_ComputeGenericDiskInfo(&Controller->GenericDiskInfo); for (LogicalDriveNumber = 0; LogicalDriveNumber < DAC960_MaxLogicalDrives; LogicalDriveNumber++) DAC960_RegisterDisk(Controller, LogicalDriveNumber); } DAC960_CreateProcEntries(); register_reboot_notifier(&DAC960_NotifierBlock); return 0; } /* DAC960_Finalize finalizes the DAC960 Driver. */ static void DAC960_Finalize(void) { int ControllerNumber; if (DAC960_ActiveControllerCount == 0) return; for (ControllerNumber = 0; ControllerNumber < DAC960_ControllerCount; ControllerNumber++) if (DAC960_Controllers[ControllerNumber] != NULL) DAC960_FinalizeController(DAC960_Controllers[ControllerNumber]); DAC960_DestroyProcEntries(); unregister_reboot_notifier(&DAC960_NotifierBlock); } /* DAC960_Notifier is the notifier for the DAC960 Driver. */ static int DAC960_Notifier(NotifierBlock_T *NotifierBlock, unsigned long Event, void *Buffer) { if (!(Event == SYS_RESTART || Event == SYS_HALT || Event == SYS_POWER_OFF)) return NOTIFY_DONE; DAC960_Finalize(); return NOTIFY_OK; } /* DAC960_V1_QueueReadWriteCommand prepares and queues a Read/Write Command for DAC960 V1 Firmware Controllers. */ static void DAC960_V1_QueueReadWriteCommand(DAC960_Command_T *Command) { DAC960_Controller_T *Controller = Command->Controller; DAC960_V1_CommandMailbox_T *CommandMailbox = &Command->V1.CommandMailbox; DAC960_V1_ClearCommand(Command); if (Command->SegmentCount == 1) { if (Command->CommandType == DAC960_ReadCommand) CommandMailbox->Type5.CommandOpcode = DAC960_V1_Read; else CommandMailbox->Type5.CommandOpcode = DAC960_V1_Write; CommandMailbox->Type5.LD.TransferLength = Command->BlockCount; CommandMailbox->Type5.LD.LogicalDriveNumber = Command->LogicalDriveNumber; CommandMailbox->Type5.LogicalBlockAddress = Command->BlockNumber; CommandMailbox->Type5.BusAddress = Virtual_to_Bus32(Command->RequestBuffer); } else { DAC960_V1_ScatterGatherSegment_T *ScatterGatherList = Command->V1.ScatterGatherList; BufferHeader_T *BufferHeader = Command->BufferHeader; char *LastDataEndPointer = NULL; int SegmentNumber = 0; if (Command->CommandType == DAC960_ReadCommand) CommandMailbox->Type5.CommandOpcode = DAC960_V1_ReadWithScatterGather; else CommandMailbox->Type5.CommandOpcode = DAC960_V1_WriteWithScatterGather; CommandMailbox->Type5.LD.TransferLength = Command->BlockCount; CommandMailbox->Type5.LD.LogicalDriveNumber = Command->LogicalDriveNumber; CommandMailbox->Type5.LogicalBlockAddress = Command->BlockNumber; CommandMailbox->Type5.BusAddress = Virtual_to_Bus32(ScatterGatherList); CommandMailbox->Type5.ScatterGatherCount = Command->SegmentCount; while (BufferHeader != NULL) { if (BufferHeader->b_data == LastDataEndPointer) { ScatterGatherList[SegmentNumber-1].SegmentByteCount += BufferHeader->b_size; LastDataEndPointer += BufferHeader->b_size; } else { ScatterGatherList[SegmentNumber].SegmentDataPointer = Virtual_to_Bus32(BufferHeader->b_data); ScatterGatherList[SegmentNumber].SegmentByteCount = BufferHeader->b_size; LastDataEndPointer = BufferHeader->b_data + BufferHeader->b_size; if (SegmentNumber++ > Controller->DriverScatterGatherLimit) panic("DAC960: Scatter/Gather Segment Overflow\n"); } BufferHeader = BufferHeader->b_reqnext; } if (SegmentNumber != Command->SegmentCount) panic("DAC960: SegmentNumber != SegmentCount\n"); } DAC960_QueueCommand(Command); } /* DAC960_V2_QueueReadWriteCommand prepares and queues a Read/Write Command for DAC960 V2 Firmware Controllers. */ static void DAC960_V2_QueueReadWriteCommand(DAC960_Command_T *Command) { DAC960_Controller_T *Controller = Command->Controller; DAC960_V2_CommandMailbox_T *CommandMailbox = &Command->V2.CommandMailbox; DAC960_V2_ClearCommand(Command); CommandMailbox->SCSI_10.CommandOpcode = DAC960_V2_SCSI_10; CommandMailbox->SCSI_10.CommandControlBits.DataTransferControllerToHost = (Command->CommandType == DAC960_ReadCommand); CommandMailbox->SCSI_10.DataTransferSize = Command->BlockCount << DAC960_BlockSizeBits; CommandMailbox->SCSI_10.RequestSenseBusAddress = Virtual_to_Bus64(&Command->V2.RequestSense); CommandMailbox->SCSI_10.PhysicalDevice = Controller->V2.LogicalDriveToVirtualDevice[Command->LogicalDriveNumber]; CommandMailbox->SCSI_10.RequestSenseSize = sizeof(DAC960_SCSI_RequestSense_T); CommandMailbox->SCSI_10.CDBLength = 10; CommandMailbox->SCSI_10.SCSI_CDB[0] = (Command->CommandType == DAC960_ReadCommand ? 0x28 : 0x2A); CommandMailbox->SCSI_10.SCSI_CDB[2] = Command->BlockNumber >> 24; CommandMailbox->SCSI_10.SCSI_CDB[3] = Command->BlockNumber >> 16; CommandMailbox->SCSI_10.SCSI_CDB[4] = Command->BlockNumber >> 8; CommandMailbox->SCSI_10.SCSI_CDB[5] = Command->BlockNumber; CommandMailbox->SCSI_10.SCSI_CDB[7] = Command->BlockCount >> 8; CommandMailbox->SCSI_10.SCSI_CDB[8] = Command->BlockCount; if (Command->SegmentCount == 1) { CommandMailbox->SCSI_10.DataTransferMemoryAddress .ScatterGatherSegments[0] .SegmentDataPointer = Virtual_to_Bus64(Command->RequestBuffer); CommandMailbox->SCSI_10.DataTransferMemoryAddress .ScatterGatherSegments[0] .SegmentByteCount = CommandMailbox->SCSI_10.DataTransferSize; } else { DAC960_V2_ScatterGatherSegment_T *ScatterGatherList = Command->V2.ScatterGatherList; BufferHeader_T *BufferHeader = Command->BufferHeader; char *LastDataEndPointer = NULL; int SegmentNumber = 0; if (Command->SegmentCount > 2) { CommandMailbox->SCSI_10.CommandControlBits .AdditionalScatterGatherListMemory = true; CommandMailbox->SCSI_10.DataTransferMemoryAddress .ExtendedScatterGather.ScatterGatherList0Length = Command->SegmentCount; CommandMailbox->SCSI_10.DataTransferMemoryAddress .ExtendedScatterGather.ScatterGatherList0Address = Virtual_to_Bus64(ScatterGatherList); } else ScatterGatherList = CommandMailbox->SCSI_10.DataTransferMemoryAddress .ScatterGatherSegments; while (BufferHeader != NULL) { if (BufferHeader->b_data == LastDataEndPointer) { ScatterGatherList[SegmentNumber-1].SegmentByteCount += BufferHeader->b_size; LastDataEndPointer += BufferHeader->b_size; } else { ScatterGatherList[SegmentNumber].SegmentDataPointer = Virtual_to_Bus64(BufferHeader->b_data); ScatterGatherList[SegmentNumber].SegmentByteCount = BufferHeader->b_size; LastDataEndPointer = BufferHeader->b_data + BufferHeader->b_size; if (SegmentNumber++ > Controller->DriverScatterGatherLimit) panic("DAC960: Scatter/Gather Segment Overflow\n"); } BufferHeader = BufferHeader->b_reqnext; } if (SegmentNumber != Command->SegmentCount) panic("DAC960: SegmentNumber != SegmentCount\n"); } DAC960_QueueCommand(Command); } /* DAC960_ProcessRequest attempts to remove one I/O Request from Controller's I/O Request Queue and queues it to the Controller. WaitForCommand is true if this function should wait for a Command to become available if necessary. This function returns true if an I/O Request was queued and false otherwise. */ static boolean DAC960_ProcessRequest(DAC960_Controller_T *Controller, boolean WaitForCommand) { RequestQueue_T *RequestQueue = Controller->RequestQueue; ListHead_T *RequestQueueHead; IO_Request_T *Request; DAC960_Command_T *Command; if (RequestQueue == NULL) return false; RequestQueueHead = &RequestQueue->queue_head; while (true) { if (list_empty(RequestQueueHead)) return false; Request = blkdev_entry_next_request(RequestQueueHead); Command = DAC960_AllocateCommand(Controller); if (Command != NULL) break; if (!WaitForCommand) return false; DAC960_WaitForCommand(Controller); } if (Request->cmd == READ) Command->CommandType = DAC960_ReadCommand; else Command->CommandType = DAC960_WriteCommand; Command->Completion = Request->waiting; Command->LogicalDriveNumber = DAC960_LogicalDriveNumber(Request->rq_dev); Command->BlockNumber = Request->sector + Controller->GenericDiskInfo.part[MINOR(Request->rq_dev)].start_sect; Command->BlockCount = Request->nr_sectors; Command->SegmentCount = Request->nr_segments; Command->BufferHeader = Request->bh; Command->RequestBuffer = Request->buffer; blkdev_dequeue_request(Request); blkdev_release_request(Request); DAC960_QueueReadWriteCommand(Command); return true; } /* DAC960_ProcessRequests attempts to remove as many I/O Requests as possible from Controller's I/O Request Queue and queue them to the Controller. */ static inline void DAC960_ProcessRequests(DAC960_Controller_T *Controller) { int Counter = 0; while (DAC960_ProcessRequest(Controller, Counter++ == 0)) ; } /* DAC960_RequestFunction is the I/O Request Function for DAC960 Controllers. */ static void DAC960_RequestFunction(RequestQueue_T *RequestQueue) { DAC960_Controller_T *Controller = (DAC960_Controller_T *) RequestQueue->queuedata; ProcessorFlags_T ProcessorFlags; /* Acquire exclusive access to Controller. */ DAC960_AcquireControllerLockRF(Controller, &ProcessorFlags); /* Process I/O Requests for Controller. */ DAC960_ProcessRequests(Controller); /* Release exclusive access to Controller. */ DAC960_ReleaseControllerLockRF(Controller, &ProcessorFlags); } /* DAC960_ProcessCompletedBuffer performs completion processing for an individual Buffer. */ static inline void DAC960_ProcessCompletedBuffer(BufferHeader_T *BufferHeader, boolean SuccessfulIO) { blk_finished_io(BufferHeader->b_size >> 9); BufferHeader->b_end_io(BufferHeader, SuccessfulIO); } /* DAC960_V1_ReadWriteError prints an appropriate error message for Command when an error occurs on a Read or Write operation. */ static void DAC960_V1_ReadWriteError(DAC960_Command_T *Command) { DAC960_Controller_T *Controller = Command->Controller; unsigned char *CommandName = "UNKNOWN"; switch (Command->CommandType) { case DAC960_ReadCommand: case DAC960_ReadRetryCommand: CommandName = "READ"; break; case DAC960_WriteCommand: case DAC960_WriteRetryCommand: CommandName = "WRITE"; break; case DAC960_MonitoringCommand: case DAC960_ImmediateCommand: case DAC960_QueuedCommand: break; } switch (Command->V1.CommandStatus) { case DAC960_V1_IrrecoverableDataError: DAC960_Error("Irrecoverable Data Error on %s:\n", Controller, CommandName); break; case DAC960_V1_LogicalDriveNonexistentOrOffline: DAC960_Error("Logical Drive Nonexistent or Offline on %s:\n", Controller, CommandName); break; case DAC960_V1_AccessBeyondEndOfLogicalDrive: DAC960_Error("Attempt to Access Beyond End of Logical Drive " "on %s:\n", Controller, CommandName); break; case DAC960_V1_BadDataEncountered: DAC960_Error("Bad Data Encountered on %s:\n", Controller, CommandName); break; default: DAC960_Error("Unexpected Error Status %04X on %s:\n", Controller, Command->V1.CommandStatus, CommandName); break; } DAC960_Error(" /dev/rd/c%dd%d: absolute blocks %u..%u\n", Controller, Controller->ControllerNumber, Command->LogicalDriveNumber, Command->BlockNumber, Command->BlockNumber + Command->BlockCount - 1); if (DAC960_PartitionNumber(Command->BufferHeader->b_rdev) > 0) DAC960_Error(" /dev/rd/c%dd%dp%d: relative blocks %u..%u\n", Controller, Controller->ControllerNumber, Command->LogicalDriveNumber, DAC960_PartitionNumber(Command->BufferHeader->b_rdev), Command->BufferHeader->b_rsector, Command->BufferHeader->b_rsector + Command->BlockCount - 1); } /* DAC960_V1_ProcessCompletedCommand performs completion processing for Command for DAC960 V1 Firmware Controllers. */ static void DAC960_V1_ProcessCompletedCommand(DAC960_Command_T *Command) { DAC960_Controller_T *Controller = Command->Controller; DAC960_CommandType_T CommandType = Command->CommandType; DAC960_V1_CommandOpcode_T CommandOpcode = Command->V1.CommandMailbox.Common.CommandOpcode; DAC960_V1_CommandStatus_T CommandStatus = Command->V1.CommandStatus; BufferHeader_T *BufferHeader = Command->BufferHeader; if (CommandType == DAC960_ReadCommand || CommandType == DAC960_WriteCommand) { if (CommandStatus == DAC960_V1_NormalCompletion) { /* Perform completion processing for all buffers in this I/O Request. */ while (BufferHeader != NULL) { BufferHeader_T *NextBufferHeader = BufferHeader->b_reqnext; BufferHeader->b_reqnext = NULL; DAC960_ProcessCompletedBuffer(BufferHeader, true); BufferHeader = NextBufferHeader; } if (Command->Completion != NULL) { complete(Command->Completion); Command->Completion = NULL; } add_blkdev_randomness(DAC960_MAJOR + Controller->ControllerNumber); } else if ((CommandStatus == DAC960_V1_IrrecoverableDataError || CommandStatus == DAC960_V1_BadDataEncountered) && BufferHeader != NULL && BufferHeader->b_reqnext != NULL) { DAC960_V1_CommandMailbox_T *CommandMailbox = &Command->V1.CommandMailbox; if (CommandType == DAC960_ReadCommand) { Command->CommandType = DAC960_ReadRetryCommand; CommandMailbox->Type5.CommandOpcode = DAC960_V1_Read; } else { Command->CommandType = DAC960_WriteRetryCommand; CommandMailbox->Type5.CommandOpcode = DAC960_V1_Write; } Command->BlockCount = BufferHeader->b_size >> DAC960_BlockSizeBits; CommandMailbox->Type5.LD.TransferLength = Command->BlockCount; CommandMailbox->Type5.BusAddress = Virtual_to_Bus32(BufferHeader->b_data); DAC960_QueueCommand(Command); return; } else { if (CommandStatus != DAC960_V1_LogicalDriveNonexistentOrOffline) DAC960_V1_ReadWriteError(Command); /* Perform completion processing for all buffers in this I/O Request. */ while (BufferHeader != NULL) { BufferHeader_T *NextBufferHeader = BufferHeader->b_reqnext; BufferHeader->b_reqnext = NULL; DAC960_ProcessCompletedBuffer(BufferHeader, false); BufferHeader = NextBufferHeader; } if (Command->Completion != NULL) { complete(Command->Completion); Command->Completion = NULL; } } } else if (CommandType == DAC960_ReadRetryCommand || CommandType == DAC960_WriteRetryCommand) { BufferHeader_T *NextBufferHeader = BufferHeader->b_reqnext; BufferHeader->b_reqnext = NULL; /* Perform completion processing for this single buffer. */ if (CommandStatus == DAC960_V1_NormalCompletion) DAC960_ProcessCompletedBuffer(BufferHeader, true); else { if (CommandStatus != DAC960_V1_LogicalDriveNonexistentOrOffline) DAC960_V1_ReadWriteError(Command); DAC960_ProcessCompletedBuffer(BufferHeader, false); } if (NextBufferHeader != NULL) { DAC960_V1_CommandMailbox_T *CommandMailbox = &Command->V1.CommandMailbox; Command->BlockNumber += BufferHeader->b_size >> DAC960_BlockSizeBits; Command->BlockCount = NextBufferHeader->b_size >> DAC960_BlockSizeBits; Command->BufferHeader = NextBufferHeader; CommandMailbox->Type5.LD.TransferLength = Command->BlockCount; CommandMailbox->Type5.LogicalBlockAddress = Command->BlockNumber; CommandMailbox->Type5.BusAddress = Virtual_to_Bus32(NextBufferHeader->b_data); DAC960_QueueCommand(Command); return; } } else if (CommandType == DAC960_MonitoringCommand || CommandOpcode == DAC960_V1_Enquiry || CommandOpcode == DAC960_V1_GetRebuildProgress) { if (CommandType != DAC960_MonitoringCommand) { if (CommandOpcode == DAC960_V1_Enquiry) memcpy(&Controller->V1.NewEnquiry, Bus32_to_Virtual(Command->V1.CommandMailbox .Type3.BusAddress), sizeof(DAC960_V1_Enquiry_T)); else if (CommandOpcode == DAC960_V1_GetRebuildProgress) memcpy(&Controller->V1.RebuildProgress, Bus32_to_Virtual(Command->V1.CommandMailbox .Type3.BusAddress), sizeof(DAC960_V1_RebuildProgress_T)); } if (CommandOpcode == DAC960_V1_Enquiry && Controller->ControllerInitialized) { DAC960_V1_Enquiry_T *OldEnquiry = &Controller->V1.Enquiry; DAC960_V1_Enquiry_T *NewEnquiry = &Controller->V1.NewEnquiry; unsigned int OldCriticalLogicalDriveCount = OldEnquiry->CriticalLogicalDriveCount; unsigned int NewCriticalLogicalDriveCount = NewEnquiry->CriticalLogicalDriveCount; if (NewEnquiry->NumberOfLogicalDrives > Controller->LogicalDriveCount) { int LogicalDriveNumber = Controller->LogicalDriveCount - 1; while (++LogicalDriveNumber < NewEnquiry->NumberOfLogicalDrives) DAC960_Critical("Logical Drive %d (/dev/rd/c%dd%d) " "Now Exists\n", Controller, LogicalDriveNumber, Controller->ControllerNumber, LogicalDriveNumber); Controller->LogicalDriveCount = NewEnquiry->NumberOfLogicalDrives; DAC960_ComputeGenericDiskInfo(&Controller->GenericDiskInfo); } if (NewEnquiry->NumberOfLogicalDrives < Controller->LogicalDriveCount) { int LogicalDriveNumber = NewEnquiry->NumberOfLogicalDrives - 1; while (++LogicalDriveNumber < Controller->LogicalDriveCount) DAC960_Critical("Logical Drive %d (/dev/rd/c%dd%d) " "No Longer Exists\n", Controller, LogicalDriveNumber, Controller->ControllerNumber, LogicalDriveNumber); Controller->LogicalDriveCount = NewEnquiry->NumberOfLogicalDrives; DAC960_ComputeGenericDiskInfo(&Controller->GenericDiskInfo); } if (NewEnquiry->StatusFlags.DeferredWriteError != OldEnquiry->StatusFlags.DeferredWriteError) DAC960_Critical("Deferred Write Error Flag is now %s\n", Controller, (NewEnquiry->StatusFlags.DeferredWriteError ? "TRUE" : "FALSE")); if ((NewCriticalLogicalDriveCount > 0 || NewCriticalLogicalDriveCount != OldCriticalLogicalDriveCount) || (NewEnquiry->OfflineLogicalDriveCount > 0 || NewEnquiry->OfflineLogicalDriveCount != OldEnquiry->OfflineLogicalDriveCount) || (NewEnquiry->DeadDriveCount > 0 || NewEnquiry->DeadDriveCount != OldEnquiry->DeadDriveCount) || (NewEnquiry->EventLogSequenceNumber != OldEnquiry->EventLogSequenceNumber) || Controller->MonitoringTimerCount == 0 || (jiffies - Controller->SecondaryMonitoringTime >= DAC960_SecondaryMonitoringInterval)) { Controller->V1.NeedLogicalDriveInformation = true; Controller->V1.NewEventLogSequenceNumber = NewEnquiry->EventLogSequenceNumber; Controller->V1.NeedErrorTableInformation = true; Controller->V1.NeedDeviceStateInformation = true; Controller->V1.StartDeviceStateScan = true; Controller->V1.NeedBackgroundInitializationStatus = Controller->V1.BackgroundInitializationStatusSupported; Controller->SecondaryMonitoringTime = jiffies; } if (NewEnquiry->RebuildFlag == DAC960_V1_StandbyRebuildInProgress || NewEnquiry->RebuildFlag == DAC960_V1_BackgroundRebuildInProgress || OldEnquiry->RebuildFlag == DAC960_V1_StandbyRebuildInProgress || OldEnquiry->RebuildFlag == DAC960_V1_BackgroundRebuildInProgress) { Controller->V1.NeedRebuildProgress = true; Controller->V1.RebuildProgressFirst = (NewEnquiry->CriticalLogicalDriveCount < OldEnquiry->CriticalLogicalDriveCount); } if (OldEnquiry->RebuildFlag == DAC960_V1_BackgroundCheckInProgress) switch (NewEnquiry->RebuildFlag) { case DAC960_V1_NoStandbyRebuildOrCheckInProgress: DAC960_Progress("Consistency Check Completed Successfully\n", Controller); break; case DAC960_V1_StandbyRebuildInProgress: case DAC960_V1_BackgroundRebuildInProgress: break; case DAC960_V1_BackgroundCheckInProgress: Controller->V1.NeedConsistencyCheckProgress = true; break; case DAC960_V1_StandbyRebuildCompletedWithError: DAC960_Progress("Consistency Check Completed with Error\n", Controller); break; case DAC960_V1_BackgroundRebuildOrCheckFailed_DriveFailed: DAC960_Progress("Consistency Check Failed - " "Physical Device Failed\n", Controller); break; case DAC960_V1_BackgroundRebuildOrCheckFailed_LogicalDriveFailed: DAC960_Progress("Consistency Check Failed - " "Logical Drive Failed\n", Controller); break; case DAC960_V1_BackgroundRebuildOrCheckFailed_OtherCauses: DAC960_Progress("Consistency Check Failed - Other Causes\n", Controller); break; case DAC960_V1_BackgroundRebuildOrCheckSuccessfullyTerminated: DAC960_Progress("Consistency Check Successfully Terminated\n", Controller); break; } else if (NewEnquiry->RebuildFlag == DAC960_V1_BackgroundCheckInProgress) Controller->V1.NeedConsistencyCheckProgress = true; Controller->MonitoringAlertMode = (NewEnquiry->CriticalLogicalDriveCount > 0 || NewEnquiry->OfflineLogicalDriveCount > 0 || NewEnquiry->DeadDriveCount > 0); if (CommandType != DAC960_MonitoringCommand && Controller->V1.RebuildFlagPending) { DAC960_V1_Enquiry_T *Enquiry = (DAC960_V1_Enquiry_T *) Bus32_to_Virtual(Command->V1.CommandMailbox.Type3.BusAddress); Enquiry->RebuildFlag = Controller->V1.PendingRebuildFlag; Controller->V1.RebuildFlagPending = false; } else if (CommandType == DAC960_MonitoringCommand && NewEnquiry->RebuildFlag > DAC960_V1_BackgroundCheckInProgress) { Controller->V1.PendingRebuildFlag = NewEnquiry->RebuildFlag; Controller->V1.RebuildFlagPending = true; } memcpy(&Controller->V1.Enquiry, &Controller->V1.NewEnquiry, sizeof(DAC960_V1_Enquiry_T)); } else if (CommandOpcode == DAC960_V1_PerformEventLogOperation) { static char *DAC960_EventMessages[] = { "killed because write recovery failed", "killed because of SCSI bus reset failure", "killed because of double check condition", "killed because it was removed", "killed because of gross error on SCSI chip", "killed because of bad tag returned from drive", "killed because of timeout on SCSI command", "killed because of reset SCSI command issued from system", "killed because busy or parity error count exceeded limit", "killed because of 'kill drive' command from system", "killed because of selection timeout", "killed due to SCSI phase sequence error", "killed due to unknown status" }; DAC960_V1_EventLogEntry_T *EventLogEntry = &Controller->V1.EventLogEntry; if (EventLogEntry->SequenceNumber == Controller->V1.OldEventLogSequenceNumber) { unsigned char SenseKey = EventLogEntry->SenseKey; unsigned char AdditionalSenseCode = EventLogEntry->AdditionalSenseCode; unsigned char AdditionalSenseCodeQualifier = EventLogEntry->AdditionalSenseCodeQualifier; if (SenseKey == DAC960_SenseKey_VendorSpecific && AdditionalSenseCode == 0x80 && AdditionalSenseCodeQualifier < sizeof(DAC960_EventMessages) / sizeof(char *)) DAC960_Critical("Physical Device %d:%d %s\n", Controller, EventLogEntry->Channel, EventLogEntry->TargetID, DAC960_EventMessages[ AdditionalSenseCodeQualifier]); else if (SenseKey == DAC960_SenseKey_UnitAttention && AdditionalSenseCode == 0x29) { if (Controller->MonitoringTimerCount > 0) Controller->V1.DeviceResetCount[EventLogEntry->Channel] [EventLogEntry->TargetID]++; } else if (!(SenseKey == DAC960_SenseKey_NoSense || (SenseKey == DAC960_SenseKey_NotReady && AdditionalSenseCode == 0x04 && (AdditionalSenseCodeQualifier == 0x01 || AdditionalSenseCodeQualifier == 0x02)))) { DAC960_Critical("Physical Device %d:%d Error Log: " "Sense Key = %X, ASC = %02X, ASCQ = %02X\n", Controller, EventLogEntry->Channel, EventLogEntry->TargetID, SenseKey, AdditionalSenseCode, AdditionalSenseCodeQualifier); DAC960_Critical("Physical Device %d:%d Error Log: " "Information = %02X%02X%02X%02X " "%02X%02X%02X%02X\n", Controller, EventLogEntry->Channel, EventLogEntry->TargetID, EventLogEntry->Information[0], EventLogEntry->Information[1], EventLogEntry->Information[2], EventLogEntry->Information[3], EventLogEntry->CommandSpecificInformation[0], EventLogEntry->CommandSpecificInformation[1], EventLogEntry->CommandSpecificInformation[2], EventLogEntry->CommandSpecificInformation[3]); } } Controller->V1.OldEventLogSequenceNumber++; } else if (CommandOpcode == DAC960_V1_GetErrorTable) { DAC960_V1_ErrorTable_T *OldErrorTable = &Controller->V1.ErrorTable; DAC960_V1_ErrorTable_T *NewErrorTable = &Controller->V1.NewErrorTable; int Channel, TargetID; for (Channel = 0; Channel < Controller->Channels; Channel++) for (TargetID = 0; TargetID < Controller->Targets; TargetID++) { DAC960_V1_ErrorTableEntry_T *NewErrorEntry = &NewErrorTable->ErrorTableEntries[Channel][TargetID]; DAC960_V1_ErrorTableEntry_T *OldErrorEntry = &OldErrorTable->ErrorTableEntries[Channel][TargetID]; if ((NewErrorEntry->ParityErrorCount != OldErrorEntry->ParityErrorCount) || (NewErrorEntry->SoftErrorCount != OldErrorEntry->SoftErrorCount) || (NewErrorEntry->HardErrorCount != OldErrorEntry->HardErrorCount) || (NewErrorEntry->MiscErrorCount != OldErrorEntry->MiscErrorCount)) DAC960_Critical("Physical Device %d:%d Errors: " "Parity = %d, Soft = %d, " "Hard = %d, Misc = %d\n", Controller, Channel, TargetID, NewErrorEntry->ParityErrorCount, NewErrorEntry->SoftErrorCount, NewErrorEntry->HardErrorCount, NewErrorEntry->MiscErrorCount); } memcpy(&Controller->V1.ErrorTable, &Controller->V1.NewErrorTable, sizeof(DAC960_V1_ErrorTable_T)); } else if (CommandOpcode == DAC960_V1_GetDeviceState) { DAC960_V1_DeviceState_T *OldDeviceState = &Controller->V1.DeviceState[Controller->V1.DeviceStateChannel] [Controller->V1.DeviceStateTargetID]; DAC960_V1_DeviceState_T *NewDeviceState = &Controller->V1.NewDeviceState; if (NewDeviceState->DeviceState != OldDeviceState->DeviceState) DAC960_Critical("Physical Device %d:%d is now %s\n", Controller, Controller->V1.DeviceStateChannel, Controller->V1.DeviceStateTargetID, (NewDeviceState->DeviceState == DAC960_V1_Device_Dead ? "DEAD" : NewDeviceState->DeviceState == DAC960_V1_Device_WriteOnly ? "WRITE-ONLY" : NewDeviceState->DeviceState == DAC960_V1_Device_Online ? "ONLINE" : "STANDBY")); if (OldDeviceState->DeviceState == DAC960_V1_Device_Dead && NewDeviceState->DeviceState != DAC960_V1_Device_Dead) { Controller->V1.NeedDeviceInquiryInformation = true; Controller->V1.NeedDeviceSerialNumberInformation = true; Controller->V1.DeviceResetCount [Controller->V1.DeviceStateChannel] [Controller->V1.DeviceStateTargetID] = 0; } memcpy(OldDeviceState, NewDeviceState, sizeof(DAC960_V1_DeviceState_T)); } else if (CommandOpcode == DAC960_V1_GetLogicalDriveInformation) { int LogicalDriveNumber; for (LogicalDriveNumber = 0; LogicalDriveNumber < Controller->LogicalDriveCount; LogicalDriveNumber++) { DAC960_V1_LogicalDriveInformation_T *OldLogicalDriveInformation = &Controller->V1.LogicalDriveInformation[LogicalDriveNumber]; DAC960_V1_LogicalDriveInformation_T *NewLogicalDriveInformation = &Controller->V1.NewLogicalDriveInformation[LogicalDriveNumber]; if (NewLogicalDriveInformation->LogicalDriveState != OldLogicalDriveInformation->LogicalDriveState) DAC960_Critical("Logical Drive %d (/dev/rd/c%dd%d) " "is now %s\n", Controller, LogicalDriveNumber, Controller->ControllerNumber, LogicalDriveNumber, (NewLogicalDriveInformation->LogicalDriveState == DAC960_V1_LogicalDrive_Online ? "ONLINE" : NewLogicalDriveInformation->LogicalDriveState == DAC960_V1_LogicalDrive_Critical ? "CRITICAL" : "OFFLINE")); if (NewLogicalDriveInformation->WriteBack != OldLogicalDriveInformation->WriteBack) DAC960_Critical("Logical Drive %d (/dev/rd/c%dd%d) " "is now %s\n", Controller, LogicalDriveNumber, Controller->ControllerNumber, LogicalDriveNumber, (NewLogicalDriveInformation->WriteBack ? "WRITE BACK" : "WRITE THRU")); } memcpy(&Controller->V1.LogicalDriveInformation, &Controller->V1.NewLogicalDriveInformation, sizeof(DAC960_V1_LogicalDriveInformationArray_T)); } else if (CommandOpcode == DAC960_V1_GetRebuildProgress) { unsigned int LogicalDriveNumber = Controller->V1.RebuildProgress.LogicalDriveNumber; unsigned int LogicalDriveSize = Controller->V1.RebuildProgress.LogicalDriveSize; unsigned int BlocksCompleted = LogicalDriveSize - Controller->V1.RebuildProgress.RemainingBlocks; if (CommandStatus == DAC960_V1_NoRebuildOrCheckInProgress && Controller->V1.LastRebuildStatus == DAC960_V1_NormalCompletion) CommandStatus = DAC960_V1_RebuildSuccessful; switch (CommandStatus) { case DAC960_V1_NormalCompletion: Controller->EphemeralProgressMessage = true; DAC960_Progress("Rebuild in Progress: " "Logical Drive %d (/dev/rd/c%dd%d) " "%d%% completed\n", Controller, LogicalDriveNumber, Controller->ControllerNumber, LogicalDriveNumber, (100 * (BlocksCompleted >> 7)) / (LogicalDriveSize >> 7)); Controller->EphemeralProgressMessage = false; break; case DAC960_V1_RebuildFailed_LogicalDriveFailure: DAC960_Progress("Rebuild Failed due to " "Logical Drive Failure\n", Controller); break; case DAC960_V1_RebuildFailed_BadBlocksOnOther: DAC960_Progress("Rebuild Failed due to " "Bad Blocks on Other Drives\n", Controller); break; case DAC960_V1_RebuildFailed_NewDriveFailed: DAC960_Progress("Rebuild Failed due to " "Failure of Drive Being Rebuilt\n", Controller); break; case DAC960_V1_NoRebuildOrCheckInProgress: break; case DAC960_V1_RebuildSuccessful: DAC960_Progress("Rebuild Completed Successfully\n", Controller); break; case DAC960_V1_RebuildSuccessfullyTerminated: DAC960_Progress("Rebuild Successfully Terminated\n", Controller); break; } Controller->V1.LastRebuildStatus = CommandStatus; if (CommandType != DAC960_MonitoringCommand && Controller->V1.RebuildStatusPending) { Command->V1.CommandStatus = Controller->V1.PendingRebuildStatus; Controller->V1.RebuildStatusPending = false; } else if (CommandType == DAC960_MonitoringCommand && CommandStatus != DAC960_V1_NormalCompletion && CommandStatus != DAC960_V1_NoRebuildOrCheckInProgress) { Controller->V1.PendingRebuildStatus = CommandStatus; Controller->V1.RebuildStatusPending = true; } } else if (CommandOpcode == DAC960_V1_RebuildStat) { unsigned int LogicalDriveNumber = Controller->V1.RebuildProgress.LogicalDriveNumber; unsigned int LogicalDriveSize = Controller->V1.RebuildProgress.LogicalDriveSize; unsigned int BlocksCompleted = LogicalDriveSize - Controller->V1.RebuildProgress.RemainingBlocks; if (CommandStatus == DAC960_V1_NormalCompletion) { Controller->EphemeralProgressMessage = true; DAC960_Progress("Consistency Check in Progress: " "Logical Drive %d (/dev/rd/c%dd%d) " "%d%% completed\n", Controller, LogicalDriveNumber, Controller->ControllerNumber, LogicalDriveNumber, (100 * (BlocksCompleted >> 7)) / (LogicalDriveSize >> 7)); Controller->EphemeralProgressMessage = false; } } else if (CommandOpcode == DAC960_V1_BackgroundInitializationControl) { unsigned int LogicalDriveNumber = Controller->V1.BackgroundInitializationStatus.LogicalDriveNumber; unsigned int LogicalDriveSize = Controller->V1.BackgroundInitializationStatus.LogicalDriveSize; unsigned int BlocksCompleted = Controller->V1.BackgroundInitializationStatus.BlocksCompleted; switch (CommandStatus) { case DAC960_V1_NormalCompletion: switch (Controller->V1.BackgroundInitializationStatus.Status) { case DAC960_V1_BackgroundInitializationInvalid: break; case DAC960_V1_BackgroundInitializationStarted: DAC960_Progress("Background Initialization Started\n", Controller); break; case DAC960_V1_BackgroundInitializationInProgress: if (BlocksCompleted == Controller->V1.LastBackgroundInitializationStatus .BlocksCompleted && LogicalDriveNumber == Controller->V1.LastBackgroundInitializationStatus .LogicalDriveNumber) break; Controller->EphemeralProgressMessage = true; DAC960_Progress("Background Initialization in Progress: " "Logical Drive %d (/dev/rd/c%dd%d) " "%d%% completed\n", Controller, LogicalDriveNumber, Controller->ControllerNumber, LogicalDriveNumber, (100 * (BlocksCompleted >> 7)) / (LogicalDriveSize >> 7)); Controller->EphemeralProgressMessage = false; break; case DAC960_V1_BackgroundInitializationSuspended: DAC960_Progress("Background Initialization Suspended\n", Controller); break; case DAC960_V1_BackgroundInitializationCancelled: DAC960_Progress("Background Initialization Cancelled\n", Controller); break; } memcpy(&Controller->V1.LastBackgroundInitializationStatus, &Controller->V1.BackgroundInitializationStatus, sizeof(DAC960_V1_BackgroundInitializationStatus_T)); break; case DAC960_V1_BackgroundInitSuccessful: if (Controller->V1.BackgroundInitializationStatus.Status == DAC960_V1_BackgroundInitializationInProgress) DAC960_Progress("Background Initialization " "Completed Successfully\n", Controller); Controller->V1.BackgroundInitializationStatus.Status = DAC960_V1_BackgroundInitializationInvalid; break; case DAC960_V1_BackgroundInitAborted: if (Controller->V1.BackgroundInitializationStatus.Status == DAC960_V1_BackgroundInitializationInProgress) DAC960_Progress("Background Initialization Aborted\n", Controller); Controller->V1.BackgroundInitializationStatus.Status = DAC960_V1_BackgroundInitializationInvalid; break; case DAC960_V1_NoBackgroundInitInProgress: break; } } } if (CommandType == DAC960_MonitoringCommand) { if (Controller->V1.NewEventLogSequenceNumber - Controller->V1.OldEventLogSequenceNumber > 0) { Command->V1.CommandMailbox.Type3E.CommandOpcode = DAC960_V1_PerformEventLogOperation; Command->V1.CommandMailbox.Type3E.OperationType = DAC960_V1_GetEventLogEntry; Command->V1.CommandMailbox.Type3E.OperationQualifier = 1; Command->V1.CommandMailbox.Type3E.SequenceNumber = Controller->V1.OldEventLogSequenceNumber; Command->V1.CommandMailbox.Type3E.BusAddress = Virtual_to_Bus32(&Controller->V1.EventLogEntry); DAC960_QueueCommand(Command); return; } if (Controller->V1.NeedErrorTableInformation) { Controller->V1.NeedErrorTableInformation = false; Command->V1.CommandMailbox.Type3.CommandOpcode = DAC960_V1_GetErrorTable; Command->V1.CommandMailbox.Type3.BusAddress = Virtual_to_Bus32(&Controller->V1.NewErrorTable); DAC960_QueueCommand(Command); return; } if (Controller->V1.NeedRebuildProgress && Controller->V1.RebuildProgressFirst) { Controller->V1.NeedRebuildProgress = false; Command->V1.CommandMailbox.Type3.CommandOpcode = DAC960_V1_GetRebuildProgress; Command->V1.CommandMailbox.Type3.BusAddress = Virtual_to_Bus32(&Controller->V1.RebuildProgress); DAC960_QueueCommand(Command); return; } if (Controller->V1.NeedDeviceStateInformation) { if (Controller->V1.NeedDeviceInquiryInformation) { DAC960_V1_DCDB_T *DCDB = &Controller->V1.MonitoringDCDB; DAC960_SCSI_Inquiry_T *InquiryStandardData = &Controller->V1.InquiryStandardData [Controller->V1.DeviceStateChannel] [Controller->V1.DeviceStateTargetID]; InquiryStandardData->PeripheralDeviceType = 0x1F; Command->V1.CommandMailbox.Type3.CommandOpcode = DAC960_V1_DCDB; Command->V1.CommandMailbox.Type3.BusAddress = Virtual_to_Bus32(DCDB); DCDB->Channel = Controller->V1.DeviceStateChannel; DCDB->TargetID = Controller->V1.DeviceStateTargetID; DCDB->Direction = DAC960_V1_DCDB_DataTransferDeviceToSystem; DCDB->EarlyStatus = false; DCDB->Timeout = DAC960_V1_DCDB_Timeout_10_seconds; DCDB->NoAutomaticRequestSense = false; DCDB->DisconnectPermitted = true; DCDB->TransferLength = sizeof(DAC960_SCSI_Inquiry_T); DCDB->BusAddress = Virtual_to_Bus32(InquiryStandardData); DCDB->CDBLength = 6; DCDB->TransferLengthHigh4 = 0; DCDB->SenseLength = sizeof(DCDB->SenseData); DCDB->CDB[0] = 0x12; /* INQUIRY */ DCDB->CDB[1] = 0; /* EVPD = 0 */ DCDB->CDB[2] = 0; /* Page Code */ DCDB->CDB[3] = 0; /* Reserved */ DCDB->CDB[4] = sizeof(DAC960_SCSI_Inquiry_T); DCDB->CDB[5] = 0; /* Control */ DAC960_QueueCommand(Command); Controller->V1.NeedDeviceInquiryInformation = false; return; } if (Controller->V1.NeedDeviceSerialNumberInformation) { DAC960_V1_DCDB_T *DCDB = &Controller->V1.MonitoringDCDB; DAC960_SCSI_Inquiry_UnitSerialNumber_T *InquiryUnitSerialNumber = &Controller->V1.InquiryUnitSerialNumber [Controller->V1.DeviceStateChannel] [Controller->V1.DeviceStateTargetID]; InquiryUnitSerialNumber->PeripheralDeviceType = 0x1F; Command->V1.CommandMailbox.Type3.CommandOpcode = DAC960_V1_DCDB; Command->V1.CommandMailbox.Type3.BusAddress = Virtual_to_Bus32(DCDB); DCDB->Channel = Controller->V1.DeviceStateChannel; DCDB->TargetID = Controller->V1.DeviceStateTargetID; DCDB->Direction = DAC960_V1_DCDB_DataTransferDeviceToSystem; DCDB->EarlyStatus = false; DCDB->Timeout = DAC960_V1_DCDB_Timeout_10_seconds; DCDB->NoAutomaticRequestSense = false; DCDB->DisconnectPermitted = true; DCDB->TransferLength = sizeof(DAC960_SCSI_Inquiry_UnitSerialNumber_T); DCDB->BusAddress = Virtual_to_Bus32(InquiryUnitSerialNumber); DCDB->CDBLength = 6; DCDB->TransferLengthHigh4 = 0; DCDB->SenseLength = sizeof(DCDB->SenseData); DCDB->CDB[0] = 0x12; /* INQUIRY */ DCDB->CDB[1] = 1; /* EVPD = 1 */ DCDB->CDB[2] = 0x80; /* Page Code */ DCDB->CDB[3] = 0; /* Reserved */ DCDB->CDB[4] = sizeof(DAC960_SCSI_Inquiry_UnitSerialNumber_T); DCDB->CDB[5] = 0; /* Control */ DAC960_QueueCommand(Command); Controller->V1.NeedDeviceSerialNumberInformation = false; return; } if (Controller->V1.StartDeviceStateScan) { Controller->V1.DeviceStateChannel = 0; Controller->V1.DeviceStateTargetID = 0; Controller->V1.StartDeviceStateScan = false; } else if (++Controller->V1.DeviceStateTargetID == Controller->Targets) { Controller->V1.DeviceStateChannel++; Controller->V1.DeviceStateTargetID = 0; } if (Controller->V1.DeviceStateChannel < Controller->Channels) { Controller->V1.NewDeviceState.DeviceState = DAC960_V1_Device_Dead; Command->V1.CommandMailbox.Type3D.CommandOpcode = DAC960_V1_GetDeviceState; Command->V1.CommandMailbox.Type3D.Channel = Controller->V1.DeviceStateChannel; Command->V1.CommandMailbox.Type3D.TargetID = Controller->V1.DeviceStateTargetID; Command->V1.CommandMailbox.Type3D.BusAddress = Virtual_to_Bus32(&Controller->V1.NewDeviceState); DAC960_QueueCommand(Command); return; } Controller->V1.NeedDeviceStateInformation = false; } if (Controller->V1.NeedLogicalDriveInformation) { Controller->V1.NeedLogicalDriveInformation = false; Command->V1.CommandMailbox.Type3.CommandOpcode = DAC960_V1_GetLogicalDriveInformation; Command->V1.CommandMailbox.Type3.BusAddress = Virtual_to_Bus32(&Controller->V1.NewLogicalDriveInformation); DAC960_QueueCommand(Command); return; } if (Controller->V1.NeedRebuildProgress) { Controller->V1.NeedRebuildProgress = false; Command->V1.CommandMailbox.Type3.CommandOpcode = DAC960_V1_GetRebuildProgress; Command->V1.CommandMailbox.Type3.BusAddress = Virtual_to_Bus32(&Controller->V1.RebuildProgress); DAC960_QueueCommand(Command); return; } if (Controller->V1.NeedConsistencyCheckProgress) { Controller->V1.NeedConsistencyCheckProgress = false; Command->V1.CommandMailbox.Type3.CommandOpcode = DAC960_V1_RebuildStat; Command->V1.CommandMailbox.Type3.BusAddress = Virtual_to_Bus32(&Controller->V1.RebuildProgress); DAC960_QueueCommand(Command); return; } if (Controller->V1.NeedBackgroundInitializationStatus) { Controller->V1.NeedBackgroundInitializationStatus = false; Command->V1.CommandMailbox.Type3B.CommandOpcode = DAC960_V1_BackgroundInitializationControl; Command->V1.CommandMailbox.Type3B.CommandOpcode2 = 0x20; Command->V1.CommandMailbox.Type3B.BusAddress = Virtual_to_Bus32(&Controller->V1.BackgroundInitializationStatus); DAC960_QueueCommand(Command); return; } Controller->MonitoringTimerCount++; Controller->MonitoringTimer.expires = jiffies + DAC960_MonitoringTimerInterval; add_timer(&Controller->MonitoringTimer); } if (CommandType == DAC960_ImmediateCommand) { complete(Command->Completion); Command->Completion = NULL; return; } if (CommandType == DAC960_QueuedCommand) { DAC960_V1_KernelCommand_T *KernelCommand = Command->V1.KernelCommand; KernelCommand->CommandStatus = Command->V1.CommandStatus; Command->V1.KernelCommand = NULL; if (CommandOpcode == DAC960_V1_DCDB) Controller->V1.DirectCommandActive[KernelCommand->DCDB->Channel] [KernelCommand->DCDB->TargetID] = false; DAC960_DeallocateCommand(Command); KernelCommand->CompletionFunction(KernelCommand); return; } /* Queue a Status Monitoring Command to the Controller using the just completed Command if one was deferred previously due to lack of a free Command when the Monitoring Timer Function was called. */ if (Controller->MonitoringCommandDeferred) { Controller->MonitoringCommandDeferred = false; DAC960_V1_QueueMonitoringCommand(Command); return; } /* Deallocate the Command. */ DAC960_DeallocateCommand(Command); /* Wake up any processes waiting on a free Command. */ wake_up(&Controller->CommandWaitQueue); } /* DAC960_V2_ReadWriteError prints an appropriate error message for Command when an error occurs on a Read or Write operation. */ static void DAC960_V2_ReadWriteError(DAC960_Command_T *Command) { DAC960_Controller_T *Controller = Command->Controller; unsigned char *SenseErrors[] = { "NO SENSE", "RECOVERED ERROR", "NOT READY", "MEDIUM ERROR", "HARDWARE ERROR", "ILLEGAL REQUEST", "UNIT ATTENTION", "DATA PROTECT", "BLANK CHECK", "VENDOR-SPECIFIC", "COPY ABORTED", "ABORTED COMMAND", "EQUAL", "VOLUME OVERFLOW", "MISCOMPARE", "RESERVED" }; unsigned char *CommandName = "UNKNOWN"; switch (Command->CommandType) { case DAC960_ReadCommand: case DAC960_ReadRetryCommand: CommandName = "READ"; break; case DAC960_WriteCommand: case DAC960_WriteRetryCommand: CommandName = "WRITE"; break; case DAC960_MonitoringCommand: case DAC960_ImmediateCommand: case DAC960_QueuedCommand: break; } DAC960_Error("Error Condition %s on %s:\n", Controller, SenseErrors[Command->V2.RequestSense.SenseKey], CommandName); DAC960_Error(" /dev/rd/c%dd%d: absolute blocks %u..%u\n", Controller, Controller->ControllerNumber, Command->LogicalDriveNumber, Command->BlockNumber, Command->BlockNumber + Command->BlockCount - 1); if (DAC960_PartitionNumber(Command->BufferHeader->b_rdev) > 0) DAC960_Error(" /dev/rd/c%dd%dp%d: relative blocks %u..%u\n", Controller, Controller->ControllerNumber, Command->LogicalDriveNumber, DAC960_PartitionNumber(Command->BufferHeader->b_rdev), Command->BufferHeader->b_rsector, Command->BufferHeader->b_rsector + Command->BlockCount - 1); } /* DAC960_V2_ReportEvent prints an appropriate message when a Controller Event occurs. */ static void DAC960_V2_ReportEvent(DAC960_Controller_T *Controller, DAC960_V2_Event_T *Event) { DAC960_SCSI_RequestSense_T *RequestSense = (DAC960_SCSI_RequestSense_T *) &Event->RequestSenseData; unsigned char MessageBuffer[DAC960_LineBufferSize]; static struct { int EventCode; unsigned char *EventMessage; } EventList[] = { /* Physical Device Events (0x0000 - 0x007F) */ { 0x0001, "P Online" }, { 0x0002, "P Standby" }, { 0x0005, "P Automatic Rebuild Started" }, { 0x0006, "P Manual Rebuild Started" }, { 0x0007, "P Rebuild Completed" }, { 0x0008, "P Rebuild Cancelled" }, { 0x0009, "P Rebuild Failed for Unknown Reasons" }, { 0x000A, "P Rebuild Failed due to New Physical Device" }, { 0x000B, "P Rebuild Failed due to Logical Drive Failure" }, { 0x000C, "S Offline" }, { 0x000D, "P Found" }, { 0x000E, "P Removed" }, { 0x000F, "P Unconfigured" }, { 0x0010, "P Expand Capacity Started" }, { 0x0011, "P Expand Capacity Completed" }, { 0x0012, "P Expand Capacity Failed" }, { 0x0013, "P Command Timed Out" }, { 0x0014, "P Command Aborted" }, { 0x0015, "P Command Retried" }, { 0x0016, "P Parity Error" }, { 0x0017, "P Soft Error" }, { 0x0018, "P Miscellaneous Error" }, { 0x0019, "P Reset" }, { 0x001A, "P Active Spare Found" }, { 0x001B, "P Warm Spare Found" }, { 0x001C, "S Sense Data Received" }, { 0x001D, "P Initialization Started" }, { 0x001E, "P Initialization Completed" }, { 0x001F, "P Initialization Failed" }, { 0x0020, "P Initialization Cancelled" }, { 0x0021, "P Failed because Write Recovery Failed" }, { 0x0022, "P Failed because SCSI Bus Reset Failed" }, { 0x0023, "P Failed because of Double Check Condition" }, { 0x0024, "P Failed because Device Cannot Be Accessed" }, { 0x0025, "P Failed because of Gross Error on SCSI Processor" }, { 0x0026, "P Failed because of Bad Tag from Device" }, { 0x0027, "P Failed because of Command Timeout" }, { 0x0028, "P Failed because of System Reset" }, { 0x0029, "P Failed because of Busy Status or Parity Error" }, { 0x002A, "P Failed because Host Set Device to Failed State" }, { 0x002B, "P Failed because of Selection Timeout" }, { 0x002C, "P Failed because of SCSI Bus Phase Error" }, { 0x002D, "P Failed because Device Returned Unknown Status" }, { 0x002E, "P Failed because Device Not Ready" }, { 0x002F, "P Failed because Device Not Found at Startup" }, { 0x0030, "P Failed because COD Write Operation Failed" }, { 0x0031, "P Failed because BDT Write Operation Failed" }, { 0x0039, "P Missing at Startup" }, { 0x003A, "P Start Rebuild Failed due to Physical Drive Too Small" }, { 0x003C, "P Temporarily Offline Device Automatically Made Online" }, { 0x003D, "P Standby Rebuild Started" }, /* Logical Device Events (0x0080 - 0x00FF) */ { 0x0080, "M Consistency Check Started" }, { 0x0081, "M Consistency Check Completed" }, { 0x0082, "M Consistency Check Cancelled" }, { 0x0083, "M Consistency Check Completed With Errors" }, { 0x0084, "M Consistency Check Failed due to Logical Drive Failure" }, { 0x0085, "M Consistency Check Failed due to Physical Device Failure" }, { 0x0086, "L Offline" }, { 0x0087, "L Critical" }, { 0x0088, "L Online" }, { 0x0089, "M Automatic Rebuild Started" }, { 0x008A, "M Manual Rebuild Started" }, { 0x008B, "M Rebuild Completed" }, { 0x008C, "M Rebuild Cancelled" }, { 0x008D, "M Rebuild Failed for Unknown Reasons" }, { 0x008E, "M Rebuild Failed due to New Physical Device" }, { 0x008F, "M Rebuild Failed due to Logical Drive Failure" }, { 0x0090, "M Initialization Started" }, { 0x0091, "M Initialization Completed" }, { 0x0092, "M Initialization Cancelled" }, { 0x0093, "M Initialization Failed" }, { 0x0094, "L Found" }, { 0x0095, "L Deleted" }, { 0x0096, "M Expand Capacity Started" }, { 0x0097, "M Expand Capacity Completed" }, { 0x0098, "M Expand Capacity Failed" }, { 0x0099, "L Bad Block Found" }, { 0x009A, "L Size Changed" }, { 0x009B, "L Type Changed" }, { 0x009C, "L Bad Data Block Found" }, { 0x009E, "L Read of Data Block in BDT" }, { 0x009F, "L Write Back Data for Disk Block Lost" }, { 0x00A0, "L Temporarily Offline RAID-5/3 Drive Made Online" }, { 0x00A1, "L Temporarily Offline RAID-6/1/0/7 Drive Made Online" }, { 0x00A2, "L Standby Rebuild Started" }, /* Fault Management Events (0x0100 - 0x017F) */ { 0x0140, "E Fan %d Failed" }, { 0x0141, "E Fan %d OK" }, { 0x0142, "E Fan %d Not Present" }, { 0x0143, "E Power Supply %d Failed" }, { 0x0144, "E Power Supply %d OK" }, { 0x0145, "E Power Supply %d Not Present" }, { 0x0146, "E Temperature Sensor %d Temperature Exceeds Safe Limit" }, { 0x0147, "E Temperature Sensor %d Temperature Exceeds Working Limit" }, { 0x0148, "E Temperature Sensor %d Temperature Normal" }, { 0x0149, "E Temperature Sensor %d Not Present" }, { 0x014A, "E Enclosure Management Unit %d Access Critical" }, { 0x014B, "E Enclosure Management Unit %d Access OK" }, { 0x014C, "E Enclosure Management Unit %d Access Offline" }, /* Controller Events (0x0180 - 0x01FF) */ { 0x0181, "C Cache Write Back Error" }, { 0x0188, "C Battery Backup Unit Found" }, { 0x0189, "C Battery Backup Unit Charge Level Low" }, { 0x018A, "C Battery Backup Unit Charge Level OK" }, { 0x0193, "C Installation Aborted" }, { 0x0195, "C Battery Backup Unit Physically Removed" }, { 0x0196, "C Memory Error During Warm Boot" }, { 0x019E, "C Memory Soft ECC Error Corrected" }, { 0x019F, "C Memory Hard ECC Error Corrected" }, { 0x01A2, "C Battery Backup Unit Failed" }, { 0x01AB, "C Mirror Race Recovery Failed" }, { 0x01AC, "C Mirror Race on Critical Drive" }, /* Controller Internal Processor Events */ { 0x0380, "C Internal Controller Hung" }, { 0x0381, "C Internal Controller Firmware Breakpoint" }, { 0x0390, "C Internal Controller i960 Processor Specific Error" }, { 0x03A0, "C Internal Controller StrongARM Processor Specific Error" }, { 0, "" } }; int EventListIndex = 0, EventCode; unsigned char EventType, *EventMessage; if (Event->EventCode == 0x1C && RequestSense->SenseKey == DAC960_SenseKey_VendorSpecific && (RequestSense->AdditionalSenseCode == 0x80 || RequestSense->AdditionalSenseCode == 0x81)) Event->EventCode = ((RequestSense->AdditionalSenseCode - 0x80) << 8) | RequestSense->AdditionalSenseCodeQualifier; while (true) { EventCode = EventList[EventListIndex].EventCode; if (EventCode == Event->EventCode || EventCode == 0) break; EventListIndex++; } EventType = EventList[EventListIndex].EventMessage[0]; EventMessage = &EventList[EventListIndex].EventMessage[2]; if (EventCode == 0) { DAC960_Critical("Unknown Controller Event Code %04X\n", Controller, Event->EventCode); return; } switch (EventType) { case 'P': DAC960_Critical("Physical Device %d:%d %s\n", Controller, Event->Channel, Event->TargetID, EventMessage); break; case 'L': DAC960_Critical("Logical Drive %d (/dev/rd/c%dd%d) %s\n", Controller, Event->LogicalUnit, Controller->ControllerNumber, Event->LogicalUnit, EventMessage); break; case 'M': DAC960_Progress("Logical Drive %d (/dev/rd/c%dd%d) %s\n", Controller, Event->LogicalUnit, Controller->ControllerNumber, Event->LogicalUnit, EventMessage); break; case 'S': if (RequestSense->SenseKey == DAC960_SenseKey_NoSense || (RequestSense->SenseKey == DAC960_SenseKey_NotReady && RequestSense->AdditionalSenseCode == 0x04 && (RequestSense->AdditionalSenseCodeQualifier == 0x01 || RequestSense->AdditionalSenseCodeQualifier == 0x02))) break; DAC960_Critical("Physical Device %d:%d %s\n", Controller, Event->Channel, Event->TargetID, EventMessage); DAC960_Critical("Physical Device %d:%d Request Sense: " "Sense Key = %X, ASC = %02X, ASCQ = %02X\n", Controller, Event->Channel, Event->TargetID, RequestSense->SenseKey, RequestSense->AdditionalSenseCode, RequestSense->AdditionalSenseCodeQualifier); DAC960_Critical("Physical Device %d:%d Request Sense: " "Information = %02X%02X%02X%02X " "%02X%02X%02X%02X\n", Controller, Event->Channel, Event->TargetID, RequestSense->Information[0], RequestSense->Information[1], RequestSense->Information[2], RequestSense->Information[3], RequestSense->CommandSpecificInformation[0], RequestSense->CommandSpecificInformation[1], RequestSense->CommandSpecificInformation[2], RequestSense->CommandSpecificInformation[3]); break; case 'E': if (Controller->SuppressEnclosureMessages) break; sprintf(MessageBuffer, EventMessage, Event->LogicalUnit); DAC960_Critical("Enclosure %d %s\n", Controller, Event->TargetID, MessageBuffer); break; case 'C': DAC960_Critical("Controller %s\n", Controller, EventMessage); break; default: DAC960_Critical("Unknown Controller Event Code %04X\n", Controller, Event->EventCode); break; } } /* DAC960_V2_ReportProgress prints an appropriate progress message for Logical Device Long Operations. */ static void DAC960_V2_ReportProgress(DAC960_Controller_T *Controller, unsigned char *MessageString, unsigned int LogicalDeviceNumber, unsigned long BlocksCompleted, unsigned long LogicalDeviceSize) { Controller->EphemeralProgressMessage = true; DAC960_Progress("%s in Progress: Logical Drive %d (/dev/rd/c%dd%d) " "%d%% completed\n", Controller, MessageString, LogicalDeviceNumber, Controller->ControllerNumber, LogicalDeviceNumber, (100 * (BlocksCompleted >> 7)) / (LogicalDeviceSize >> 7)); Controller->EphemeralProgressMessage = false; } /* DAC960_V2_ProcessCompletedCommand performs completion processing for Command for DAC960 V2 Firmware Controllers. */ static void DAC960_V2_ProcessCompletedCommand(DAC960_Command_T *Command) { DAC960_Controller_T *Controller = Command->Controller; DAC960_CommandType_T CommandType = Command->CommandType; DAC960_V2_CommandMailbox_T *CommandMailbox = &Command->V2.CommandMailbox; DAC960_V2_IOCTL_Opcode_T CommandOpcode = CommandMailbox->Common.IOCTL_Opcode; DAC960_V2_CommandStatus_T CommandStatus = Command->V2.CommandStatus; BufferHeader_T *BufferHeader = Command->BufferHeader; if (CommandType == DAC960_ReadCommand || CommandType == DAC960_WriteCommand) { if (CommandStatus == DAC960_V2_NormalCompletion) { /* Perform completion processing for all buffers in this I/O Request. */ while (BufferHeader != NULL) { BufferHeader_T *NextBufferHeader = BufferHeader->b_reqnext; BufferHeader->b_reqnext = NULL; DAC960_ProcessCompletedBuffer(BufferHeader, true); BufferHeader = NextBufferHeader; } if (Command->Completion != NULL) { complete(Command->Completion); Command->Completion = NULL; } add_blkdev_randomness(DAC960_MAJOR + Controller->ControllerNumber); } else if (Command->V2.RequestSense.SenseKey == DAC960_SenseKey_MediumError && BufferHeader != NULL && BufferHeader->b_reqnext != NULL) { if (CommandType == DAC960_ReadCommand) Command->CommandType = DAC960_ReadRetryCommand; else Command->CommandType = DAC960_WriteRetryCommand; Command->BlockCount = BufferHeader->b_size >> DAC960_BlockSizeBits; CommandMailbox->SCSI_10.CommandControlBits .AdditionalScatterGatherListMemory = false; CommandMailbox->SCSI_10.DataTransferSize = Command->BlockCount << DAC960_BlockSizeBits; CommandMailbox->SCSI_10.DataTransferMemoryAddress .ScatterGatherSegments[0].SegmentDataPointer = Virtual_to_Bus64(BufferHeader->b_data); CommandMailbox->SCSI_10.DataTransferMemoryAddress .ScatterGatherSegments[0].SegmentByteCount = CommandMailbox->SCSI_10.DataTransferSize; CommandMailbox->SCSI_10.SCSI_CDB[7] = Command->BlockCount >> 8; CommandMailbox->SCSI_10.SCSI_CDB[8] = Command->BlockCount; DAC960_QueueCommand(Command); return; } else { if (Command->V2.RequestSense.SenseKey != DAC960_SenseKey_NotReady) DAC960_V2_ReadWriteError(Command); /* Perform completion processing for all buffers in this I/O Request. */ while (BufferHeader != NULL) { BufferHeader_T *NextBufferHeader = BufferHeader->b_reqnext; BufferHeader->b_reqnext = NULL; DAC960_ProcessCompletedBuffer(BufferHeader, false); BufferHeader = NextBufferHeader; } if (Command->Completion != NULL) { complete(Command->Completion); Command->Completion = NULL; } } } else if (CommandType == DAC960_ReadRetryCommand || CommandType == DAC960_WriteRetryCommand) { BufferHeader_T *NextBufferHeader = BufferHeader->b_reqnext; BufferHeader->b_reqnext = NULL; /* Perform completion processing for this single buffer. */ if (CommandStatus == DAC960_V2_NormalCompletion) DAC960_ProcessCompletedBuffer(BufferHeader, true); else { if (Command->V2.RequestSense.SenseKey != DAC960_SenseKey_NotReady) DAC960_V2_ReadWriteError(Command); DAC960_ProcessCompletedBuffer(BufferHeader, false); } if (NextBufferHeader != NULL) { Command->BlockNumber += BufferHeader->b_size >> DAC960_BlockSizeBits; Command->BlockCount = NextBufferHeader->b_size >> DAC960_BlockSizeBits; Command->BufferHeader = NextBufferHeader; CommandMailbox->SCSI_10.DataTransferSize = Command->BlockCount << DAC960_BlockSizeBits; CommandMailbox->SCSI_10.DataTransferMemoryAddress .ScatterGatherSegments[0] .SegmentDataPointer = Virtual_to_Bus64(NextBufferHeader->b_data); CommandMailbox->SCSI_10.DataTransferMemoryAddress .ScatterGatherSegments[0] .SegmentByteCount = CommandMailbox->SCSI_10.DataTransferSize; CommandMailbox->SCSI_10.SCSI_CDB[2] = Command->BlockNumber >> 24; CommandMailbox->SCSI_10.SCSI_CDB[3] = Command->BlockNumber >> 16; CommandMailbox->SCSI_10.SCSI_CDB[4] = Command->BlockNumber >> 8; CommandMailbox->SCSI_10.SCSI_CDB[5] = Command->BlockNumber; CommandMailbox->SCSI_10.SCSI_CDB[7] = Command->BlockCount >> 8; CommandMailbox->SCSI_10.SCSI_CDB[8] = Command->BlockCount; DAC960_QueueCommand(Command); return; } } else if (CommandType == DAC960_MonitoringCommand) { if (CommandOpcode == DAC960_V2_GetControllerInfo) { DAC960_V2_ControllerInfo_T *NewControllerInfo = &Controller->V2.NewControllerInformation; DAC960_V2_ControllerInfo_T *ControllerInfo = &Controller->V2.ControllerInformation; Controller->LogicalDriveCount = NewControllerInfo->LogicalDevicesPresent; Controller->V2.NeedLogicalDeviceInformation = true; Controller->V2.NeedPhysicalDeviceInformation = true; Controller->V2.StartLogicalDeviceInformationScan = true; Controller->V2.StartPhysicalDeviceInformationScan = true; Controller->MonitoringAlertMode = (NewControllerInfo->LogicalDevicesCritical > 0 || NewControllerInfo->LogicalDevicesOffline > 0 || NewControllerInfo->PhysicalDisksCritical > 0 || NewControllerInfo->PhysicalDisksOffline > 0); memcpy(ControllerInfo, NewControllerInfo, sizeof(DAC960_V2_ControllerInfo_T)); } else if (CommandOpcode == DAC960_V2_GetEvent) { if (CommandStatus == DAC960_V2_NormalCompletion) DAC960_V2_ReportEvent(Controller, &Controller->V2.Event); Controller->V2.NextEventSequenceNumber++; } else if (CommandOpcode == DAC960_V2_GetPhysicalDeviceInfoValid && CommandStatus == DAC960_V2_NormalCompletion) { DAC960_V2_PhysicalDeviceInfo_T *NewPhysicalDeviceInfo = &Controller->V2.NewPhysicalDeviceInformation; unsigned int PhysicalDeviceIndex = Controller->V2.PhysicalDeviceIndex; DAC960_V2_PhysicalDeviceInfo_T *PhysicalDeviceInfo = Controller->V2.PhysicalDeviceInformation[PhysicalDeviceIndex]; DAC960_SCSI_Inquiry_UnitSerialNumber_T *InquiryUnitSerialNumber = Controller->V2.InquiryUnitSerialNumber[PhysicalDeviceIndex]; unsigned int DeviceIndex; while (PhysicalDeviceInfo != NULL && (NewPhysicalDeviceInfo->Channel > PhysicalDeviceInfo->Channel || (NewPhysicalDeviceInfo->Channel == PhysicalDeviceInfo->Channel && (NewPhysicalDeviceInfo->TargetID > PhysicalDeviceInfo->TargetID || (NewPhysicalDeviceInfo->TargetID == PhysicalDeviceInfo->TargetID && NewPhysicalDeviceInfo->LogicalUnit > PhysicalDeviceInfo->LogicalUnit))))) { DAC960_Critical("Physical Device %d:%d No Longer Exists\n", Controller, PhysicalDeviceInfo->Channel, PhysicalDeviceInfo->TargetID); Controller->V2.PhysicalDeviceInformation [PhysicalDeviceIndex] = NULL; Controller->V2.InquiryUnitSerialNumber [PhysicalDeviceIndex] = NULL; kfree(PhysicalDeviceInfo); kfree(InquiryUnitSerialNumber); for (DeviceIndex = PhysicalDeviceIndex; DeviceIndex < DAC960_V2_MaxPhysicalDevices - 1; DeviceIndex++) { Controller->V2.PhysicalDeviceInformation[DeviceIndex] = Controller->V2.PhysicalDeviceInformation[DeviceIndex+1]; Controller->V2.InquiryUnitSerialNumber[DeviceIndex] = Controller->V2.InquiryUnitSerialNumber[DeviceIndex+1]; } Controller->V2.PhysicalDeviceInformation [DAC960_V2_MaxPhysicalDevices-1] = NULL; Controller->V2.InquiryUnitSerialNumber [DAC960_V2_MaxPhysicalDevices-1] = NULL; PhysicalDeviceInfo = Controller->V2.PhysicalDeviceInformation[PhysicalDeviceIndex]; InquiryUnitSerialNumber = Controller->V2.InquiryUnitSerialNumber[PhysicalDeviceIndex]; } if (PhysicalDeviceInfo == NULL || (NewPhysicalDeviceInfo->Channel != PhysicalDeviceInfo->Channel) || (NewPhysicalDeviceInfo->TargetID != PhysicalDeviceInfo->TargetID) || (NewPhysicalDeviceInfo->LogicalUnit != PhysicalDeviceInfo->LogicalUnit)) { PhysicalDeviceInfo = (DAC960_V2_PhysicalDeviceInfo_T *) kmalloc(sizeof(DAC960_V2_PhysicalDeviceInfo_T), GFP_ATOMIC); InquiryUnitSerialNumber = (DAC960_SCSI_Inquiry_UnitSerialNumber_T *) kmalloc(sizeof(DAC960_SCSI_Inquiry_UnitSerialNumber_T), GFP_ATOMIC); if (InquiryUnitSerialNumber == NULL && PhysicalDeviceInfo != NULL) { kfree(PhysicalDeviceInfo); PhysicalDeviceInfo = NULL; } DAC960_Critical("Physical Device %d:%d Now Exists%s\n", Controller, NewPhysicalDeviceInfo->Channel, NewPhysicalDeviceInfo->TargetID, (PhysicalDeviceInfo != NULL ? "" : " - Allocation Failed")); if (PhysicalDeviceInfo != NULL) { memset(PhysicalDeviceInfo, 0, sizeof(DAC960_V2_PhysicalDeviceInfo_T)); PhysicalDeviceInfo->PhysicalDeviceState = DAC960_V2_Device_InvalidState; memset(InquiryUnitSerialNumber, 0, sizeof(DAC960_SCSI_Inquiry_UnitSerialNumber_T)); InquiryUnitSerialNumber->PeripheralDeviceType = 0x1F; for (DeviceIndex = DAC960_V2_MaxPhysicalDevices - 1; DeviceIndex > PhysicalDeviceIndex; DeviceIndex--) { Controller->V2.PhysicalDeviceInformation[DeviceIndex] = Controller->V2.PhysicalDeviceInformation[DeviceIndex-1]; Controller->V2.InquiryUnitSerialNumber[DeviceIndex] = Controller->V2.InquiryUnitSerialNumber[DeviceIndex-1]; } Controller->V2.PhysicalDeviceInformation [PhysicalDeviceIndex] = PhysicalDeviceInfo; Controller->V2.InquiryUnitSerialNumber [PhysicalDeviceIndex] = InquiryUnitSerialNumber; Controller->V2.NeedDeviceSerialNumberInformation = true; } } if (PhysicalDeviceInfo != NULL) { if (NewPhysicalDeviceInfo->PhysicalDeviceState != PhysicalDeviceInfo->PhysicalDeviceState) DAC960_Critical( "Physical Device %d:%d is now %s\n", Controller, NewPhysicalDeviceInfo->Channel, NewPhysicalDeviceInfo->TargetID, (NewPhysicalDeviceInfo->PhysicalDeviceState == DAC960_V2_Device_Online ? "ONLINE" : NewPhysicalDeviceInfo->PhysicalDeviceState == DAC960_V2_Device_Rebuild ? "REBUILD" : NewPhysicalDeviceInfo->PhysicalDeviceState == DAC960_V2_Device_Missing ? "MISSING" : NewPhysicalDeviceInfo->PhysicalDeviceState == DAC960_V2_Device_Critical ? "CRITICAL" : NewPhysicalDeviceInfo->PhysicalDeviceState == DAC960_V2_Device_Dead ? "DEAD" : NewPhysicalDeviceInfo->PhysicalDeviceState == DAC960_V2_Device_SuspectedDead ? "SUSPECTED-DEAD" : NewPhysicalDeviceInfo->PhysicalDeviceState == DAC960_V2_Device_CommandedOffline ? "COMMANDED-OFFLINE" : NewPhysicalDeviceInfo->PhysicalDeviceState == DAC960_V2_Device_Standby ? "STANDBY" : "UNKNOWN")); if ((NewPhysicalDeviceInfo->ParityErrors != PhysicalDeviceInfo->ParityErrors) || (NewPhysicalDeviceInfo->SoftErrors != PhysicalDeviceInfo->SoftErrors) || (NewPhysicalDeviceInfo->HardErrors != PhysicalDeviceInfo->HardErrors) || (NewPhysicalDeviceInfo->MiscellaneousErrors != PhysicalDeviceInfo->MiscellaneousErrors) || (NewPhysicalDeviceInfo->CommandTimeouts != PhysicalDeviceInfo->CommandTimeouts) || (NewPhysicalDeviceInfo->Retries != PhysicalDeviceInfo->Retries) || (NewPhysicalDeviceInfo->Aborts != PhysicalDeviceInfo->Aborts) || (NewPhysicalDeviceInfo->PredictedFailuresDetected != PhysicalDeviceInfo->PredictedFailuresDetected)) { DAC960_Critical("Physical Device %d:%d Errors: " "Parity = %d, Soft = %d, " "Hard = %d, Misc = %d\n", Controller, NewPhysicalDeviceInfo->Channel, NewPhysicalDeviceInfo->TargetID, NewPhysicalDeviceInfo->ParityErrors, NewPhysicalDeviceInfo->SoftErrors, NewPhysicalDeviceInfo->HardErrors, NewPhysicalDeviceInfo->MiscellaneousErrors); DAC960_Critical("Physical Device %d:%d Errors: " "Timeouts = %d, Retries = %d, " "Aborts = %d, Predicted = %d\n", Controller, NewPhysicalDeviceInfo->Channel, NewPhysicalDeviceInfo->TargetID, NewPhysicalDeviceInfo->CommandTimeouts, NewPhysicalDeviceInfo->Retries, NewPhysicalDeviceInfo->Aborts, NewPhysicalDeviceInfo ->PredictedFailuresDetected); } if ((PhysicalDeviceInfo->PhysicalDeviceState == DAC960_V2_Device_Dead || PhysicalDeviceInfo->PhysicalDeviceState == DAC960_V2_Device_InvalidState) && NewPhysicalDeviceInfo->PhysicalDeviceState != DAC960_V2_Device_Dead) Controller->V2.NeedDeviceSerialNumberInformation = true; memcpy(PhysicalDeviceInfo, NewPhysicalDeviceInfo, sizeof(DAC960_V2_PhysicalDeviceInfo_T)); } NewPhysicalDeviceInfo->LogicalUnit++; Controller->V2.PhysicalDeviceIndex++; } else if (CommandOpcode == DAC960_V2_GetPhysicalDeviceInfoValid) { unsigned int DeviceIndex; for (DeviceIndex = Controller->V2.PhysicalDeviceIndex; DeviceIndex < DAC960_V2_MaxPhysicalDevices; DeviceIndex++) { DAC960_V2_PhysicalDeviceInfo_T *PhysicalDeviceInfo = Controller->V2.PhysicalDeviceInformation[DeviceIndex]; DAC960_SCSI_Inquiry_UnitSerialNumber_T *InquiryUnitSerialNumber = Controller->V2.InquiryUnitSerialNumber[DeviceIndex]; if (PhysicalDeviceInfo == NULL) break; DAC960_Critical("Physical Device %d:%d No Longer Exists\n", Controller, PhysicalDeviceInfo->Channel, PhysicalDeviceInfo->TargetID); Controller->V2.PhysicalDeviceInformation[DeviceIndex] = NULL; Controller->V2.InquiryUnitSerialNumber[DeviceIndex] = NULL; kfree(PhysicalDeviceInfo); kfree(InquiryUnitSerialNumber); } Controller->V2.NeedPhysicalDeviceInformation = false; } else if (CommandOpcode == DAC960_V2_GetLogicalDeviceInfoValid && CommandStatus == DAC960_V2_NormalCompletion) { DAC960_V2_LogicalDeviceInfo_T *NewLogicalDeviceInfo = &Controller->V2.NewLogicalDeviceInformation; unsigned short LogicalDeviceNumber = NewLogicalDeviceInfo->LogicalDeviceNumber; DAC960_V2_LogicalDeviceInfo_T *LogicalDeviceInfo = Controller->V2.LogicalDeviceInformation[LogicalDeviceNumber]; if (LogicalDeviceInfo == NULL) { DAC960_V2_PhysicalDevice_T PhysicalDevice; PhysicalDevice.Controller = 0; PhysicalDevice.Channel = NewLogicalDeviceInfo->Channel; PhysicalDevice.TargetID = NewLogicalDeviceInfo->TargetID; PhysicalDevice.LogicalUnit = NewLogicalDeviceInfo->LogicalUnit; Controller->V2.LogicalDriveToVirtualDevice[LogicalDeviceNumber] = PhysicalDevice; LogicalDeviceInfo = (DAC960_V2_LogicalDeviceInfo_T *) kmalloc(sizeof(DAC960_V2_LogicalDeviceInfo_T), GFP_ATOMIC); Controller->V2.LogicalDeviceInformation[LogicalDeviceNumber] = LogicalDeviceInfo; DAC960_Critical("Logical Drive %d (/dev/rd/c%dd%d) " "Now Exists%s\n", Controller, LogicalDeviceNumber, Controller->ControllerNumber, LogicalDeviceNumber, (LogicalDeviceInfo != NULL ? "" : " - Allocation Failed")); if (LogicalDeviceInfo != NULL) { memset(LogicalDeviceInfo, 0, sizeof(DAC960_V2_LogicalDeviceInfo_T)); DAC960_ComputeGenericDiskInfo(&Controller->GenericDiskInfo); } } if (LogicalDeviceInfo != NULL) { unsigned long LogicalDeviceSize = NewLogicalDeviceInfo->ConfigurableDeviceSize; if (NewLogicalDeviceInfo->LogicalDeviceState != LogicalDeviceInfo->LogicalDeviceState) DAC960_Critical("Logical Drive %d (/dev/rd/c%dd%d) " "is now %s\n", Controller, LogicalDeviceNumber, Controller->ControllerNumber, LogicalDeviceNumber, (NewLogicalDeviceInfo->LogicalDeviceState == DAC960_V2_LogicalDevice_Online ? "ONLINE" : NewLogicalDeviceInfo->LogicalDeviceState == DAC960_V2_LogicalDevice_Critical ? "CRITICAL" : "OFFLINE")); if ((NewLogicalDeviceInfo->SoftErrors != LogicalDeviceInfo->SoftErrors) || (NewLogicalDeviceInfo->CommandsFailed != LogicalDeviceInfo->CommandsFailed) || (NewLogicalDeviceInfo->DeferredWriteErrors != LogicalDeviceInfo->DeferredWriteErrors)) DAC960_Critical("Logical Drive %d (/dev/rd/c%dd%d) Errors: " "Soft = %d, Failed = %d, Deferred Write = %d\n", Controller, LogicalDeviceNumber, Controller->ControllerNumber, LogicalDeviceNumber, NewLogicalDeviceInfo->SoftErrors, NewLogicalDeviceInfo->CommandsFailed, NewLogicalDeviceInfo->DeferredWriteErrors); if (NewLogicalDeviceInfo->ConsistencyCheckInProgress) DAC960_V2_ReportProgress(Controller, "Consistency Check", LogicalDeviceNumber, NewLogicalDeviceInfo ->ConsistencyCheckBlockNumber, LogicalDeviceSize); else if (NewLogicalDeviceInfo->RebuildInProgress) DAC960_V2_ReportProgress(Controller, "Rebuild", LogicalDeviceNumber, NewLogicalDeviceInfo ->RebuildBlockNumber, LogicalDeviceSize); else if (NewLogicalDeviceInfo->BackgroundInitializationInProgress) DAC960_V2_ReportProgress(Controller, "Background Initialization", LogicalDeviceNumber, NewLogicalDeviceInfo ->BackgroundInitializationBlockNumber, LogicalDeviceSize); else if (NewLogicalDeviceInfo->ForegroundInitializationInProgress) DAC960_V2_ReportProgress(Controller, "Foreground Initialization", LogicalDeviceNumber, NewLogicalDeviceInfo ->ForegroundInitializationBlockNumber, LogicalDeviceSize); else if (NewLogicalDeviceInfo->DataMigrationInProgress) DAC960_V2_ReportProgress(Controller, "Data Migration", LogicalDeviceNumber, NewLogicalDeviceInfo ->DataMigrationBlockNumber, LogicalDeviceSize); else if (NewLogicalDeviceInfo->PatrolOperationInProgress) DAC960_V2_ReportProgress(Controller, "Patrol Operation", LogicalDeviceNumber, NewLogicalDeviceInfo ->PatrolOperationBlockNumber, LogicalDeviceSize); if (LogicalDeviceInfo->BackgroundInitializationInProgress && !NewLogicalDeviceInfo->BackgroundInitializationInProgress) DAC960_Progress("Logical Drive %d (/dev/rd/c%dd%d) " "Background Initialization %s\n", Controller, LogicalDeviceNumber, Controller->ControllerNumber, LogicalDeviceNumber, (NewLogicalDeviceInfo->LogicalDeviceControl .LogicalDeviceInitialized ? "Completed" : "Failed")); memcpy(LogicalDeviceInfo, NewLogicalDeviceInfo, sizeof(DAC960_V2_LogicalDeviceInfo_T)); } Controller->V2.LogicalDriveFoundDuringScan [LogicalDeviceNumber] = true; NewLogicalDeviceInfo->LogicalDeviceNumber++; } else if (CommandOpcode == DAC960_V2_GetLogicalDeviceInfoValid) { int LogicalDriveNumber; for (LogicalDriveNumber = 0; LogicalDriveNumber < DAC960_MaxLogicalDrives; LogicalDriveNumber++) { DAC960_V2_LogicalDeviceInfo_T *LogicalDeviceInfo = Controller->V2.LogicalDeviceInformation[LogicalDriveNumber]; if (LogicalDeviceInfo == NULL || Controller->V2.LogicalDriveFoundDuringScan [LogicalDriveNumber]) continue; DAC960_Critical("Logical Drive %d (/dev/rd/c%dd%d) " "No Longer Exists\n", Controller, LogicalDriveNumber, Controller->ControllerNumber, LogicalDriveNumber); Controller->V2.LogicalDeviceInformation [LogicalDriveNumber] = NULL; kfree(LogicalDeviceInfo); Controller->LogicalDriveInitiallyAccessible [LogicalDriveNumber] = false; DAC960_ComputeGenericDiskInfo(&Controller->GenericDiskInfo); } Controller->V2.NeedLogicalDeviceInformation = false; } if (Controller->V2.HealthStatusBuffer->NextEventSequenceNumber - Controller->V2.NextEventSequenceNumber > 0) { CommandMailbox->GetEvent.CommandOpcode = DAC960_V2_IOCTL; CommandMailbox->GetEvent.DataTransferSize = sizeof(DAC960_V2_Event_T); CommandMailbox->GetEvent.EventSequenceNumberHigh16 = Controller->V2.NextEventSequenceNumber >> 16; CommandMailbox->GetEvent.ControllerNumber = 0; CommandMailbox->GetEvent.IOCTL_Opcode = DAC960_V2_GetEvent; CommandMailbox->GetEvent.EventSequenceNumberLow16 = Controller->V2.NextEventSequenceNumber & 0xFFFF; CommandMailbox->GetEvent.DataTransferMemoryAddress .ScatterGatherSegments[0] .SegmentDataPointer = Virtual_to_Bus64(&Controller->V2.Event); CommandMailbox->GetEvent.DataTransferMemoryAddress .ScatterGatherSegments[0] .SegmentByteCount = CommandMailbox->GetEvent.DataTransferSize; DAC960_QueueCommand(Command); return; } if (Controller->V2.NeedPhysicalDeviceInformation) { if (Controller->V2.NeedDeviceSerialNumberInformation) { DAC960_SCSI_Inquiry_UnitSerialNumber_T *InquiryUnitSerialNumber = Controller->V2.InquiryUnitSerialNumber [Controller->V2.PhysicalDeviceIndex - 1]; InquiryUnitSerialNumber->PeripheralDeviceType = 0x1F; CommandMailbox->SCSI_10.CommandOpcode = DAC960_V2_SCSI_10_Passthru; CommandMailbox->SCSI_10.DataTransferSize = sizeof(DAC960_SCSI_Inquiry_UnitSerialNumber_T); CommandMailbox->SCSI_10.PhysicalDevice.LogicalUnit = Controller->V2.NewPhysicalDeviceInformation.LogicalUnit - 1; CommandMailbox->SCSI_10.PhysicalDevice.TargetID = Controller->V2.NewPhysicalDeviceInformation.TargetID; CommandMailbox->SCSI_10.PhysicalDevice.Channel = Controller->V2.NewPhysicalDeviceInformation.Channel; CommandMailbox->SCSI_10.CDBLength = 6; CommandMailbox->SCSI_10.SCSI_CDB[0] = 0x12; /* INQUIRY */ CommandMailbox->SCSI_10.SCSI_CDB[1] = 1; /* EVPD = 1 */ CommandMailbox->SCSI_10.SCSI_CDB[2] = 0x80; /* Page Code */ CommandMailbox->SCSI_10.SCSI_CDB[3] = 0; /* Reserved */ CommandMailbox->SCSI_10.SCSI_CDB[4] = sizeof(DAC960_SCSI_Inquiry_UnitSerialNumber_T); CommandMailbox->SCSI_10.SCSI_CDB[5] = 0; /* Control */ CommandMailbox->SCSI_10.DataTransferMemoryAddress .ScatterGatherSegments[0] .SegmentDataPointer = Virtual_to_Bus64(InquiryUnitSerialNumber); CommandMailbox->SCSI_10.DataTransferMemoryAddress .ScatterGatherSegments[0] .SegmentByteCount = CommandMailbox->SCSI_10.DataTransferSize; DAC960_QueueCommand(Command); Controller->V2.NeedDeviceSerialNumberInformation = false; return; } if (Controller->V2.StartPhysicalDeviceInformationScan) { Controller->V2.PhysicalDeviceIndex = 0; Controller->V2.NewPhysicalDeviceInformation.Channel = 0; Controller->V2.NewPhysicalDeviceInformation.TargetID = 0; Controller->V2.NewPhysicalDeviceInformation.LogicalUnit = 0; Controller->V2.StartPhysicalDeviceInformationScan = false; } CommandMailbox->PhysicalDeviceInfo.CommandOpcode = DAC960_V2_IOCTL; CommandMailbox->PhysicalDeviceInfo.DataTransferSize = sizeof(DAC960_V2_PhysicalDeviceInfo_T); CommandMailbox->PhysicalDeviceInfo.PhysicalDevice.LogicalUnit = Controller->V2.NewPhysicalDeviceInformation.LogicalUnit; CommandMailbox->PhysicalDeviceInfo.PhysicalDevice.TargetID = Controller->V2.NewPhysicalDeviceInformation.TargetID; CommandMailbox->PhysicalDeviceInfo.PhysicalDevice.Channel = Controller->V2.NewPhysicalDeviceInformation.Channel; CommandMailbox->PhysicalDeviceInfo.IOCTL_Opcode = DAC960_V2_GetPhysicalDeviceInfoValid; CommandMailbox->PhysicalDeviceInfo.DataTransferMemoryAddress .ScatterGatherSegments[0] .SegmentDataPointer = Virtual_to_Bus64(&Controller->V2.NewPhysicalDeviceInformation); CommandMailbox->PhysicalDeviceInfo.DataTransferMemoryAddress .ScatterGatherSegments[0] .SegmentByteCount = CommandMailbox->PhysicalDeviceInfo.DataTransferSize; DAC960_QueueCommand(Command); return; } if (Controller->V2.NeedLogicalDeviceInformation) { if (Controller->V2.StartLogicalDeviceInformationScan) { int LogicalDriveNumber; for (LogicalDriveNumber = 0; LogicalDriveNumber < DAC960_MaxLogicalDrives; LogicalDriveNumber++) Controller->V2.LogicalDriveFoundDuringScan [LogicalDriveNumber] = false; Controller->V2.NewLogicalDeviceInformation .LogicalDeviceNumber = 0; Controller->V2.StartLogicalDeviceInformationScan = false; } CommandMailbox->LogicalDeviceInfo.CommandOpcode = DAC960_V2_IOCTL; CommandMailbox->LogicalDeviceInfo.DataTransferSize = sizeof(DAC960_V2_LogicalDeviceInfo_T); CommandMailbox->LogicalDeviceInfo.LogicalDevice.LogicalDeviceNumber = Controller->V2.NewLogicalDeviceInformation.LogicalDeviceNumber; CommandMailbox->LogicalDeviceInfo.IOCTL_Opcode = DAC960_V2_GetLogicalDeviceInfoValid; CommandMailbox->LogicalDeviceInfo.DataTransferMemoryAddress .ScatterGatherSegments[0] .SegmentDataPointer = Virtual_to_Bus64(&Controller->V2.NewLogicalDeviceInformation); CommandMailbox->LogicalDeviceInfo.DataTransferMemoryAddress .ScatterGatherSegments[0] .SegmentByteCount = CommandMailbox->LogicalDeviceInfo.DataTransferSize; DAC960_QueueCommand(Command); return; } Controller->MonitoringTimerCount++; Controller->MonitoringTimer.expires = jiffies + DAC960_HealthStatusMonitoringInterval; add_timer(&Controller->MonitoringTimer); } if (CommandType == DAC960_ImmediateCommand) { complete(Command->Completion); Command->Completion = NULL; return; } if (CommandType == DAC960_QueuedCommand) { DAC960_V2_KernelCommand_T *KernelCommand = Command->V2.KernelCommand; KernelCommand->CommandStatus = CommandStatus; KernelCommand->RequestSenseLength = Command->V2.RequestSenseLength; KernelCommand->DataTransferLength = Command->V2.DataTransferResidue; Command->V2.KernelCommand = NULL; DAC960_DeallocateCommand(Command); KernelCommand->CompletionFunction(KernelCommand); return; } /* Queue a Status Monitoring Command to the Controller using the just completed Command if one was deferred previously due to lack of a free Command when the Monitoring Timer Function was called. */ if (Controller->MonitoringCommandDeferred) { Controller->MonitoringCommandDeferred = false; DAC960_V2_QueueMonitoringCommand(Command); return; } /* Deallocate the Command. */ DAC960_DeallocateCommand(Command); /* Wake up any processes waiting on a free Command. */ wake_up(&Controller->CommandWaitQueue); } /* DAC960_BA_InterruptHandler handles hardware interrupts from DAC960 BA Series Controllers. */ static void DAC960_BA_InterruptHandler(int IRQ_Channel, void *DeviceIdentifier, Registers_T *InterruptRegisters) { DAC960_Controller_T *Controller = (DAC960_Controller_T *) DeviceIdentifier; void *ControllerBaseAddress = Controller->BaseAddress; DAC960_V2_StatusMailbox_T *NextStatusMailbox; ProcessorFlags_T ProcessorFlags; /* Acquire exclusive access to Controller. */ DAC960_AcquireControllerLockIH(Controller, &ProcessorFlags); /* Process Hardware Interrupts for Controller. */ DAC960_BA_AcknowledgeInterrupt(ControllerBaseAddress); NextStatusMailbox = Controller->V2.NextStatusMailbox; while (NextStatusMailbox->Fields.CommandIdentifier > 0) { DAC960_V2_CommandIdentifier_T CommandIdentifier = NextStatusMailbox->Fields.CommandIdentifier; DAC960_Command_T *Command = Controller->Commands[CommandIdentifier-1]; Command->V2.CommandStatus = NextStatusMailbox->Fields.CommandStatus; Command->V2.RequestSenseLength = NextStatusMailbox->Fields.RequestSenseLength; Command->V2.DataTransferResidue = NextStatusMailbox->Fields.DataTransferResidue; NextStatusMailbox->Words[0] = 0; if (++NextStatusMailbox > Controller->V2.LastStatusMailbox) NextStatusMailbox = Controller->V2.FirstStatusMailbox; DAC960_V2_ProcessCompletedCommand(Command); } Controller->V2.NextStatusMailbox = NextStatusMailbox; /* Attempt to remove additional I/O Requests from the Controller's I/O Request Queue and queue them to the Controller. */ while (DAC960_ProcessRequest(Controller, false)) ; /* Release exclusive access to Controller. */ DAC960_ReleaseControllerLockIH(Controller, &ProcessorFlags); } /* DAC960_LP_InterruptHandler handles hardware interrupts from DAC960 LP Series Controllers. */ static void DAC960_LP_InterruptHandler(int IRQ_Channel, void *DeviceIdentifier, Registers_T *InterruptRegisters) { DAC960_Controller_T *Controller = (DAC960_Controller_T *) DeviceIdentifier; void *ControllerBaseAddress = Controller->BaseAddress; DAC960_V2_StatusMailbox_T *NextStatusMailbox; ProcessorFlags_T ProcessorFlags; /* Acquire exclusive access to Controller. */ DAC960_AcquireControllerLockIH(Controller, &ProcessorFlags); /* Process Hardware Interrupts for Controller. */ DAC960_LP_AcknowledgeInterrupt(ControllerBaseAddress); NextStatusMailbox = Controller->V2.NextStatusMailbox; while (NextStatusMailbox->Fields.CommandIdentifier > 0) { DAC960_V2_CommandIdentifier_T CommandIdentifier = NextStatusMailbox->Fields.CommandIdentifier; DAC960_Command_T *Command = Controller->Commands[CommandIdentifier-1]; Command->V2.CommandStatus = NextStatusMailbox->Fields.CommandStatus; Command->V2.RequestSenseLength = NextStatusMailbox->Fields.RequestSenseLength; Command->V2.DataTransferResidue = NextStatusMailbox->Fields.DataTransferResidue; NextStatusMailbox->Words[0] = 0; if (++NextStatusMailbox > Controller->V2.LastStatusMailbox) NextStatusMailbox = Controller->V2.FirstStatusMailbox; DAC960_V2_ProcessCompletedCommand(Command); } Controller->V2.NextStatusMailbox = NextStatusMailbox; /* Attempt to remove additional I/O Requests from the Controller's I/O Request Queue and queue them to the Controller. */ while (DAC960_ProcessRequest(Controller, false)) ; /* Release exclusive access to Controller. */ DAC960_ReleaseControllerLockIH(Controller, &ProcessorFlags); } /* DAC960_LA_InterruptHandler handles hardware interrupts from DAC960 LA Series Controllers. */ static void DAC960_LA_InterruptHandler(int IRQ_Channel, void *DeviceIdentifier, Registers_T *InterruptRegisters) { DAC960_Controller_T *Controller = (DAC960_Controller_T *) DeviceIdentifier; void *ControllerBaseAddress = Controller->BaseAddress; DAC960_V1_StatusMailbox_T *NextStatusMailbox; ProcessorFlags_T ProcessorFlags; /* Acquire exclusive access to Controller. */ DAC960_AcquireControllerLockIH(Controller, &ProcessorFlags); /* Process Hardware Interrupts for Controller. */ DAC960_LA_AcknowledgeInterrupt(ControllerBaseAddress); NextStatusMailbox = Controller->V1.NextStatusMailbox; while (NextStatusMailbox->Fields.Valid) { DAC960_V1_CommandIdentifier_T CommandIdentifier = NextStatusMailbox->Fields.CommandIdentifier; DAC960_Command_T *Command = Controller->Commands[CommandIdentifier-1]; Command->V1.CommandStatus = NextStatusMailbox->Fields.CommandStatus; NextStatusMailbox->Word = 0; if (++NextStatusMailbox > Controller->V1.LastStatusMailbox) NextStatusMailbox = Controller->V1.FirstStatusMailbox; DAC960_V1_ProcessCompletedCommand(Command); } Controller->V1.NextStatusMailbox = NextStatusMailbox; /* Attempt to remove additional I/O Requests from the Controller's I/O Request Queue and queue them to the Controller. */ while (DAC960_ProcessRequest(Controller, false)) ; /* Release exclusive access to Controller. */ DAC960_ReleaseControllerLockIH(Controller, &ProcessorFlags); } /* DAC960_PG_InterruptHandler handles hardware interrupts from DAC960 PG Series Controllers. */ static void DAC960_PG_InterruptHandler(int IRQ_Channel, void *DeviceIdentifier, Registers_T *InterruptRegisters) { DAC960_Controller_T *Controller = (DAC960_Controller_T *) DeviceIdentifier; void *ControllerBaseAddress = Controller->BaseAddress; DAC960_V1_StatusMailbox_T *NextStatusMailbox; ProcessorFlags_T ProcessorFlags; /* Acquire exclusive access to Controller. */ DAC960_AcquireControllerLockIH(Controller, &ProcessorFlags); /* Process Hardware Interrupts for Controller. */ DAC960_PG_AcknowledgeInterrupt(ControllerBaseAddress); NextStatusMailbox = Controller->V1.NextStatusMailbox; while (NextStatusMailbox->Fields.Valid) { DAC960_V1_CommandIdentifier_T CommandIdentifier = NextStatusMailbox->Fields.CommandIdentifier; DAC960_Command_T *Command = Controller->Commands[CommandIdentifier-1]; Command->V1.CommandStatus = NextStatusMailbox->Fields.CommandStatus; NextStatusMailbox->Word = 0; if (++NextStatusMailbox > Controller->V1.LastStatusMailbox) NextStatusMailbox = Controller->V1.FirstStatusMailbox; DAC960_V1_ProcessCompletedCommand(Command); } Controller->V1.NextStatusMailbox = NextStatusMailbox; /* Attempt to remove additional I/O Requests from the Controller's I/O Request Queue and queue them to the Controller. */ while (DAC960_ProcessRequest(Controller, false)) ; /* Release exclusive access to Controller. */ DAC960_ReleaseControllerLockIH(Controller, &ProcessorFlags); } /* DAC960_PD_InterruptHandler handles hardware interrupts from DAC960 PD Series Controllers. */ static void DAC960_PD_InterruptHandler(int IRQ_Channel, void *DeviceIdentifier, Registers_T *InterruptRegisters) { DAC960_Controller_T *Controller = (DAC960_Controller_T *) DeviceIdentifier; void *ControllerBaseAddress = Controller->BaseAddress; ProcessorFlags_T ProcessorFlags; /* Acquire exclusive access to Controller. */ DAC960_AcquireControllerLockIH(Controller, &ProcessorFlags); /* Process Hardware Interrupts for Controller. */ while (DAC960_PD_StatusAvailableP(ControllerBaseAddress)) { DAC960_V1_CommandIdentifier_T CommandIdentifier = DAC960_PD_ReadStatusCommandIdentifier(ControllerBaseAddress); DAC960_Command_T *Command = Controller->Commands[CommandIdentifier-1]; Command->V1.CommandStatus = DAC960_PD_ReadStatusRegister(ControllerBaseAddress); DAC960_PD_AcknowledgeInterrupt(ControllerBaseAddress); DAC960_PD_AcknowledgeStatus(ControllerBaseAddress); DAC960_V1_ProcessCompletedCommand(Command); } /* Attempt to remove additional I/O Requests from the Controller's I/O Request Queue and queue them to the Controller. */ while (DAC960_ProcessRequest(Controller, false)) ; /* Release exclusive access to Controller. */ DAC960_ReleaseControllerLockIH(Controller, &ProcessorFlags); } /* DAC960_P_InterruptHandler handles hardware interrupts from DAC960 P Series Controllers. */ static void DAC960_P_InterruptHandler(int IRQ_Channel, void *DeviceIdentifier, Registers_T *InterruptRegisters) { DAC960_Controller_T *Controller = (DAC960_Controller_T *) DeviceIdentifier; void *ControllerBaseAddress = Controller->BaseAddress; ProcessorFlags_T ProcessorFlags; /* Acquire exclusive access to Controller. */ DAC960_AcquireControllerLockIH(Controller, &ProcessorFlags); /* Process Hardware Interrupts for Controller. */ while (DAC960_PD_StatusAvailableP(ControllerBaseAddress)) { DAC960_V1_CommandIdentifier_T CommandIdentifier = DAC960_PD_ReadStatusCommandIdentifier(ControllerBaseAddress); DAC960_Command_T *Command = Controller->Commands[CommandIdentifier-1]; DAC960_V1_CommandMailbox_T *CommandMailbox = &Command->V1.CommandMailbox; DAC960_V1_CommandOpcode_T CommandOpcode = CommandMailbox->Common.CommandOpcode; Command->V1.CommandStatus = DAC960_PD_ReadStatusRegister(ControllerBaseAddress); DAC960_PD_AcknowledgeInterrupt(ControllerBaseAddress); DAC960_PD_AcknowledgeStatus(ControllerBaseAddress); switch (CommandOpcode) { case DAC960_V1_Enquiry_Old: Command->V1.CommandMailbox.Common.CommandOpcode = DAC960_V1_Enquiry; DAC960_P_To_PD_TranslateEnquiry( Bus32_to_Virtual(CommandMailbox->Type3.BusAddress)); break; case DAC960_V1_GetDeviceState_Old: Command->V1.CommandMailbox.Common.CommandOpcode = DAC960_V1_GetDeviceState; DAC960_P_To_PD_TranslateDeviceState( Bus32_to_Virtual(CommandMailbox->Type3.BusAddress)); break; case DAC960_V1_Read_Old: Command->V1.CommandMailbox.Common.CommandOpcode = DAC960_V1_Read; DAC960_P_To_PD_TranslateReadWriteCommand(CommandMailbox); break; case DAC960_V1_Write_Old: Command->V1.CommandMailbox.Common.CommandOpcode = DAC960_V1_Write; DAC960_P_To_PD_TranslateReadWriteCommand(CommandMailbox); break; case DAC960_V1_ReadWithScatterGather_Old: Command->V1.CommandMailbox.Common.CommandOpcode = DAC960_V1_ReadWithScatterGather; DAC960_P_To_PD_TranslateReadWriteCommand(CommandMailbox); break; case DAC960_V1_WriteWithScatterGather_Old: Command->V1.CommandMailbox.Common.CommandOpcode = DAC960_V1_WriteWithScatterGather; DAC960_P_To_PD_TranslateReadWriteCommand(CommandMailbox); break; default: break; } DAC960_V1_ProcessCompletedCommand(Command); } /* Attempt to remove additional I/O Requests from the Controller's I/O Request Queue and queue them to the Controller. */ while (DAC960_ProcessRequest(Controller, false)) ; /* Release exclusive access to Controller. */ DAC960_ReleaseControllerLockIH(Controller, &ProcessorFlags); } /* DAC960_V1_QueueMonitoringCommand queues a Monitoring Command to DAC960 V1 Firmware Controllers. */ static void DAC960_V1_QueueMonitoringCommand(DAC960_Command_T *Command) { DAC960_Controller_T *Controller = Command->Controller; DAC960_V1_CommandMailbox_T *CommandMailbox = &Command->V1.CommandMailbox; DAC960_V1_ClearCommand(Command); Command->CommandType = DAC960_MonitoringCommand; CommandMailbox->Type3.CommandOpcode = DAC960_V1_Enquiry; CommandMailbox->Type3.BusAddress = Virtual_to_Bus32(&Controller->V1.NewEnquiry); DAC960_QueueCommand(Command); } /* DAC960_V2_QueueMonitoringCommand queues a Monitoring Command to DAC960 V2 Firmware Controllers. */ static void DAC960_V2_QueueMonitoringCommand(DAC960_Command_T *Command) { DAC960_Controller_T *Controller = Command->Controller; DAC960_V2_CommandMailbox_T *CommandMailbox = &Command->V2.CommandMailbox; DAC960_V2_ClearCommand(Command); Command->CommandType = DAC960_MonitoringCommand; CommandMailbox->ControllerInfo.CommandOpcode = DAC960_V2_IOCTL; CommandMailbox->ControllerInfo.CommandControlBits .DataTransferControllerToHost = true; CommandMailbox->ControllerInfo.CommandControlBits .NoAutoRequestSense = true; CommandMailbox->ControllerInfo.DataTransferSize = sizeof(DAC960_V2_ControllerInfo_T); CommandMailbox->ControllerInfo.ControllerNumber = 0; CommandMailbox->ControllerInfo.IOCTL_Opcode = DAC960_V2_GetControllerInfo; CommandMailbox->ControllerInfo.DataTransferMemoryAddress .ScatterGatherSegments[0] .SegmentDataPointer = Virtual_to_Bus64(&Controller->V2.NewControllerInformation); CommandMailbox->ControllerInfo.DataTransferMemoryAddress .ScatterGatherSegments[0] .SegmentByteCount = CommandMailbox->ControllerInfo.DataTransferSize; DAC960_QueueCommand(Command); } /* DAC960_MonitoringTimerFunction is the timer function for monitoring the status of DAC960 Controllers. */ static void DAC960_MonitoringTimerFunction(unsigned long TimerData) { DAC960_Controller_T *Controller = (DAC960_Controller_T *) TimerData; DAC960_Command_T *Command; ProcessorFlags_T ProcessorFlags; if (Controller->FirmwareType == DAC960_V1_Controller) { /* Acquire exclusive access to Controller. */ DAC960_AcquireControllerLock(Controller, &ProcessorFlags); /* Queue a Status Monitoring Command to Controller. */ Command = DAC960_AllocateCommand(Controller); if (Command != NULL) DAC960_V1_QueueMonitoringCommand(Command); else Controller->MonitoringCommandDeferred = true; /* Release exclusive access to Controller. */ DAC960_ReleaseControllerLock(Controller, &ProcessorFlags); } else { DAC960_V2_ControllerInfo_T *ControllerInfo = &Controller->V2.ControllerInformation; unsigned int StatusChangeCounter = Controller->V2.HealthStatusBuffer->StatusChangeCounter; boolean ForceMonitoringCommand = false; if (jiffies - Controller->SecondaryMonitoringTime > DAC960_SecondaryMonitoringInterval) { int LogicalDriveNumber; for (LogicalDriveNumber = 0; LogicalDriveNumber < DAC960_MaxLogicalDrives; LogicalDriveNumber++) { DAC960_V2_LogicalDeviceInfo_T *LogicalDeviceInfo = Controller->V2.LogicalDeviceInformation[LogicalDriveNumber]; if (LogicalDeviceInfo == NULL) continue; if (!LogicalDeviceInfo->LogicalDeviceControl .LogicalDeviceInitialized) { ForceMonitoringCommand = true; break; } } Controller->SecondaryMonitoringTime = jiffies; } if (StatusChangeCounter == Controller->V2.StatusChangeCounter && Controller->V2.HealthStatusBuffer->NextEventSequenceNumber == Controller->V2.NextEventSequenceNumber && (ControllerInfo->BackgroundInitializationsActive + ControllerInfo->LogicalDeviceInitializationsActive + ControllerInfo->PhysicalDeviceInitializationsActive + ControllerInfo->ConsistencyChecksActive + ControllerInfo->RebuildsActive + ControllerInfo->OnlineExpansionsActive == 0 || jiffies - Controller->PrimaryMonitoringTime < DAC960_MonitoringTimerInterval) && !ForceMonitoringCommand) { Controller->MonitoringTimer.expires = jiffies + DAC960_HealthStatusMonitoringInterval; add_timer(&Controller->MonitoringTimer); return; } Controller->V2.StatusChangeCounter = StatusChangeCounter; Controller->PrimaryMonitoringTime = jiffies; /* Acquire exclusive access to Controller. */ DAC960_AcquireControllerLock(Controller, &ProcessorFlags); /* Queue a Status Monitoring Command to Controller. */ Command = DAC960_AllocateCommand(Controller); if (Command != NULL) DAC960_V2_QueueMonitoringCommand(Command); else Controller->MonitoringCommandDeferred = true; /* Release exclusive access to Controller. */ DAC960_ReleaseControllerLock(Controller, &ProcessorFlags); /* Wake up any processes waiting on a Health Status Buffer change. */ wake_up(&Controller->HealthStatusWaitQueue); } } /* DAC960_Open is the Device Open Function for the DAC960 Driver. */ static int DAC960_Open(Inode_T *Inode, File_T *File) { int ControllerNumber = DAC960_ControllerNumber(Inode->i_rdev); int LogicalDriveNumber = DAC960_LogicalDriveNumber(Inode->i_rdev); DAC960_Controller_T *Controller; if (ControllerNumber == 0 && LogicalDriveNumber == 0 && (File->f_flags & O_NONBLOCK)) goto ModuleOnly; if (ControllerNumber < 0 || ControllerNumber > DAC960_ControllerCount - 1) return -ENXIO; Controller = DAC960_Controllers[ControllerNumber]; if (Controller == NULL) return -ENXIO; if (Controller->FirmwareType == DAC960_V1_Controller) { if (LogicalDriveNumber > Controller->LogicalDriveCount - 1) return -ENXIO; if (Controller->V1.LogicalDriveInformation [LogicalDriveNumber].LogicalDriveState == DAC960_V1_LogicalDrive_Offline) return -ENXIO; } else { DAC960_V2_LogicalDeviceInfo_T *LogicalDeviceInfo = Controller->V2.LogicalDeviceInformation[LogicalDriveNumber]; if (LogicalDeviceInfo == NULL || LogicalDeviceInfo->LogicalDeviceState == DAC960_V2_LogicalDevice_Offline) return -ENXIO; } if (!Controller->LogicalDriveInitiallyAccessible[LogicalDriveNumber]) { Controller->LogicalDriveInitiallyAccessible[LogicalDriveNumber] = true; DAC960_ComputeGenericDiskInfo(&Controller->GenericDiskInfo); DAC960_RegisterDisk(Controller, LogicalDriveNumber); } if (Controller->GenericDiskInfo.sizes[MINOR(Inode->i_rdev)] == 0) return -ENXIO; /* Increment Controller and Logical Drive Usage Counts. */ Controller->ControllerUsageCount++; Controller->LogicalDriveUsageCount[LogicalDriveNumber]++; ModuleOnly: return 0; } /* DAC960_Release is the Device Release Function for the DAC960 Driver. */ static int DAC960_Release(Inode_T *Inode, File_T *File) { int ControllerNumber = DAC960_ControllerNumber(Inode->i_rdev); int LogicalDriveNumber = DAC960_LogicalDriveNumber(Inode->i_rdev); DAC960_Controller_T *Controller = DAC960_Controllers[ControllerNumber]; if (ControllerNumber == 0 && LogicalDriveNumber == 0 && File != NULL && (File->f_flags & O_NONBLOCK)) goto ModuleOnly; /* Decrement the Logical Drive and Controller Usage Counts. */ Controller->LogicalDriveUsageCount[LogicalDriveNumber]--; Controller->ControllerUsageCount--; ModuleOnly: return 0; } /* DAC960_IOCTL is the Device IOCTL Function for the DAC960 Driver. */ static int DAC960_IOCTL(Inode_T *Inode, File_T *File, unsigned int Request, unsigned long Argument) { int ControllerNumber = DAC960_ControllerNumber(Inode->i_rdev); int LogicalDriveNumber = DAC960_LogicalDriveNumber(Inode->i_rdev); DiskGeometry_T Geometry, *UserGeometry; DAC960_Controller_T *Controller; int PartitionNumber; if (File != NULL && (File->f_flags & O_NONBLOCK)) return DAC960_UserIOCTL(Inode, File, Request, Argument); if (ControllerNumber < 0 || ControllerNumber > DAC960_ControllerCount - 1) return -ENXIO; Controller = DAC960_Controllers[ControllerNumber]; if (Controller == NULL) return -ENXIO; switch (Request) { case HDIO_GETGEO: /* Get BIOS Disk Geometry. */ UserGeometry = (DiskGeometry_T *) Argument; if (UserGeometry == NULL) return -EINVAL; if (Controller->FirmwareType == DAC960_V1_Controller) { if (LogicalDriveNumber > Controller->LogicalDriveCount - 1) return -ENXIO; Geometry.heads = Controller->V1.GeometryTranslationHeads; Geometry.sectors = Controller->V1.GeometryTranslationSectors; Geometry.cylinders = Controller->V1.LogicalDriveInformation[LogicalDriveNumber] .LogicalDriveSize / (Geometry.heads * Geometry.sectors); } else { DAC960_V2_LogicalDeviceInfo_T *LogicalDeviceInfo = Controller->V2.LogicalDeviceInformation[LogicalDriveNumber]; if (LogicalDeviceInfo == NULL) return -EINVAL; switch (LogicalDeviceInfo->DriveGeometry) { case DAC960_V2_Geometry_128_32: Geometry.heads = 128; Geometry.sectors = 32; break; case DAC960_V2_Geometry_255_63: Geometry.heads = 255; Geometry.sectors = 63; break; default: DAC960_Error("Illegal Logical Device Geometry %d\n", Controller, LogicalDeviceInfo->DriveGeometry); return -EINVAL; } Geometry.cylinders = LogicalDeviceInfo->ConfigurableDeviceSize / (Geometry.heads * Geometry.sectors); } Geometry.start = Controller->GenericDiskInfo.part[MINOR(Inode->i_rdev)].start_sect; return (copy_to_user(UserGeometry, &Geometry, sizeof(DiskGeometry_T)) ? -EFAULT : 0); case BLKGETSIZE: /* Get Device Size. */ if ((unsigned long *) Argument == NULL) return -EINVAL; return put_user(Controller->GenericDiskInfo.part[MINOR(Inode->i_rdev)] .nr_sects, (unsigned long *) Argument); case BLKGETSIZE64: if ((u64 *) Argument == NULL) return -EINVAL; return put_user((u64) Controller->GenericDiskInfo .part[MINOR(Inode->i_rdev)] .nr_sects << 9, (u64 *) Argument); case BLKRAGET: case BLKRASET: case BLKFLSBUF: case BLKBSZGET: case BLKBSZSET: return blk_ioctl(Inode->i_rdev, Request, Argument); case BLKRRPART: /* Re-Read Partition Table. */ if (!capable(CAP_SYS_ADMIN)) return -EACCES; if (Controller->LogicalDriveUsageCount[LogicalDriveNumber] > 1) return -EBUSY; for (PartitionNumber = 0; PartitionNumber < DAC960_MaxPartitions; PartitionNumber++) { KernelDevice_T Device = DAC960_KernelDevice(ControllerNumber, LogicalDriveNumber, PartitionNumber); int MinorNumber = DAC960_MinorNumber(LogicalDriveNumber, PartitionNumber); if (Controller->GenericDiskInfo.part[MinorNumber].nr_sects == 0) continue; /* Flush all changes and invalidate buffered state. */ invalidate_device(Device, 1); /* Clear existing partition sizes. */ if (PartitionNumber > 0) { Controller->GenericDiskInfo.part[MinorNumber].start_sect = 0; Controller->GenericDiskInfo.part[MinorNumber].nr_sects = 0; } /* Reset the Block Size so that the partition table can be read. */ set_blocksize(Device, BLOCK_SIZE); } DAC960_RegisterDisk(Controller, LogicalDriveNumber); return 0; } return -EINVAL; } /* DAC960_UserIOCTL is the User IOCTL Function for the DAC960 Driver. */ static int DAC960_UserIOCTL(Inode_T *Inode, File_T *File, unsigned int Request, unsigned long Argument) { int ErrorCode = 0 ; if (!capable(CAP_SYS_ADMIN)) return -EACCES; switch (Request) { case DAC960_IOCTL_GET_CONTROLLER_COUNT: return DAC960_ControllerCount; case DAC960_IOCTL_GET_CONTROLLER_INFO: { DAC960_ControllerInfo_T *UserSpaceControllerInfo = (DAC960_ControllerInfo_T *) Argument; DAC960_ControllerInfo_T ControllerInfo; DAC960_Controller_T *Controller; int ControllerNumber; if (UserSpaceControllerInfo == NULL) return -EINVAL; ErrorCode = get_user(ControllerNumber, &UserSpaceControllerInfo->ControllerNumber); if (ErrorCode != 0) return ErrorCode; if (ControllerNumber < 0 || ControllerNumber > DAC960_ControllerCount - 1) return -ENXIO; Controller = DAC960_Controllers[ControllerNumber]; if (Controller == NULL) return -ENXIO; memset(&ControllerInfo, 0, sizeof(DAC960_ControllerInfo_T)); ControllerInfo.ControllerNumber = ControllerNumber; ControllerInfo.FirmwareType = Controller->FirmwareType; ControllerInfo.Channels = Controller->Channels; ControllerInfo.Targets = Controller->Targets; ControllerInfo.PCI_Bus = Controller->Bus; ControllerInfo.PCI_Device = Controller->Device; ControllerInfo.PCI_Function = Controller->Function; ControllerInfo.IRQ_Channel = Controller->IRQ_Channel; ControllerInfo.PCI_Address = Controller->PCI_Address; strcpy(ControllerInfo.ModelName, Controller->ModelName); strcpy(ControllerInfo.FirmwareVersion, Controller->FirmwareVersion); return (copy_to_user(UserSpaceControllerInfo, &ControllerInfo, sizeof(DAC960_ControllerInfo_T)) ? -EFAULT : 0); } case DAC960_IOCTL_V1_EXECUTE_COMMAND: { DAC960_V1_UserCommand_T *UserSpaceUserCommand = (DAC960_V1_UserCommand_T *) Argument; DAC960_V1_UserCommand_T UserCommand; DAC960_Controller_T *Controller; DAC960_Command_T *Command = NULL; DAC960_V1_CommandOpcode_T CommandOpcode; DAC960_V1_CommandStatus_T CommandStatus; DAC960_V1_DCDB_T DCDB; ProcessorFlags_T ProcessorFlags; int ControllerNumber, DataTransferLength; unsigned char *DataTransferBuffer = NULL; if (UserSpaceUserCommand == NULL) return -EINVAL; if (copy_from_user(&UserCommand, UserSpaceUserCommand, sizeof(DAC960_V1_UserCommand_T))) { ErrorCode = -EFAULT; goto Failure1; } ControllerNumber = UserCommand.ControllerNumber; if (ControllerNumber < 0 || ControllerNumber > DAC960_ControllerCount - 1) return -ENXIO; Controller = DAC960_Controllers[ControllerNumber]; if (Controller == NULL) return -ENXIO; if (Controller->FirmwareType != DAC960_V1_Controller) return -EINVAL; CommandOpcode = UserCommand.CommandMailbox.Common.CommandOpcode; DataTransferLength = UserCommand.DataTransferLength; if (CommandOpcode & 0x80) return -EINVAL; if (CommandOpcode == DAC960_V1_DCDB) { if (copy_from_user(&DCDB, UserCommand.DCDB, sizeof(DAC960_V1_DCDB_T))) { ErrorCode = -EFAULT; goto Failure1; } if (DCDB.Channel >= DAC960_V1_MaxChannels) return -EINVAL; if (!((DataTransferLength == 0 && DCDB.Direction == DAC960_V1_DCDB_NoDataTransfer) || (DataTransferLength > 0 && DCDB.Direction == DAC960_V1_DCDB_DataTransferDeviceToSystem) || (DataTransferLength < 0 && DCDB.Direction == DAC960_V1_DCDB_DataTransferSystemToDevice))) return -EINVAL; if (((DCDB.TransferLengthHigh4 << 16) | DCDB.TransferLength) != abs(DataTransferLength)) return -EINVAL; } if (DataTransferLength > 0) { DataTransferBuffer = kmalloc(DataTransferLength, GFP_KERNEL); if (DataTransferBuffer == NULL) return -ENOMEM; memset(DataTransferBuffer, 0, DataTransferLength); } else if (DataTransferLength < 0) { DataTransferBuffer = kmalloc(-DataTransferLength, GFP_KERNEL); if (DataTransferBuffer == NULL) return -ENOMEM; if (copy_from_user(DataTransferBuffer, UserCommand.DataTransferBuffer, -DataTransferLength)) { ErrorCode = -EFAULT; goto Failure1; } } if (CommandOpcode == DAC960_V1_DCDB) { DAC960_AcquireControllerLock(Controller, &ProcessorFlags); while ((Command = DAC960_AllocateCommand(Controller)) == NULL) DAC960_WaitForCommand(Controller); while (Controller->V1.DirectCommandActive[DCDB.Channel] [DCDB.TargetID]) { spin_unlock_irq(&io_request_lock); __wait_event(Controller->CommandWaitQueue, !Controller->V1.DirectCommandActive [DCDB.Channel][DCDB.TargetID]); spin_lock_irq(&io_request_lock); } Controller->V1.DirectCommandActive[DCDB.Channel] [DCDB.TargetID] = true; DAC960_ReleaseControllerLock(Controller, &ProcessorFlags); DAC960_V1_ClearCommand(Command); Command->CommandType = DAC960_ImmediateCommand; memcpy(&Command->V1.CommandMailbox, &UserCommand.CommandMailbox, sizeof(DAC960_V1_CommandMailbox_T)); Command->V1.CommandMailbox.Type3.BusAddress = Virtual_to_Bus32(&DCDB); DCDB.BusAddress = Virtual_to_Bus32(DataTransferBuffer); } else { DAC960_AcquireControllerLock(Controller, &ProcessorFlags); while ((Command = DAC960_AllocateCommand(Controller)) == NULL) DAC960_WaitForCommand(Controller); DAC960_ReleaseControllerLock(Controller, &ProcessorFlags); DAC960_V1_ClearCommand(Command); Command->CommandType = DAC960_ImmediateCommand; memcpy(&Command->V1.CommandMailbox, &UserCommand.CommandMailbox, sizeof(DAC960_V1_CommandMailbox_T)); if (DataTransferBuffer != NULL) Command->V1.CommandMailbox.Type3.BusAddress = Virtual_to_Bus32(DataTransferBuffer); } DAC960_ExecuteCommand(Command); CommandStatus = Command->V1.CommandStatus; DAC960_AcquireControllerLock(Controller, &ProcessorFlags); DAC960_DeallocateCommand(Command); DAC960_ReleaseControllerLock(Controller, &ProcessorFlags); if (DataTransferLength > 0) { if (copy_to_user(UserCommand.DataTransferBuffer, DataTransferBuffer, DataTransferLength)) ErrorCode = -EFAULT; goto Failure1; } if (CommandOpcode == DAC960_V1_DCDB) { Controller->V1.DirectCommandActive[DCDB.Channel] [DCDB.TargetID] = false; if (copy_to_user(UserCommand.DCDB, &DCDB, sizeof(DAC960_V1_DCDB_T))) { ErrorCode = -EFAULT; goto Failure1; } } ErrorCode = CommandStatus; Failure1: if (DataTransferBuffer != NULL) kfree(DataTransferBuffer); return ErrorCode; } case DAC960_IOCTL_V2_EXECUTE_COMMAND: { DAC960_V2_UserCommand_T *UserSpaceUserCommand = (DAC960_V2_UserCommand_T *) Argument; DAC960_V2_UserCommand_T UserCommand; DAC960_Controller_T *Controller; DAC960_Command_T *Command = NULL; DAC960_V2_CommandMailbox_T *CommandMailbox; DAC960_V2_CommandStatus_T CommandStatus; ProcessorFlags_T ProcessorFlags; int ControllerNumber, DataTransferLength; int DataTransferResidue, RequestSenseLength; unsigned char *DataTransferBuffer = NULL; unsigned char *RequestSenseBuffer = NULL; if (UserSpaceUserCommand == NULL) return -EINVAL; if (copy_from_user(&UserCommand, UserSpaceUserCommand, sizeof(DAC960_V2_UserCommand_T))) { ErrorCode = -EFAULT; goto Failure2; } ControllerNumber = UserCommand.ControllerNumber; if (ControllerNumber < 0 || ControllerNumber > DAC960_ControllerCount - 1) return -ENXIO; Controller = DAC960_Controllers[ControllerNumber]; if (Controller == NULL) return -ENXIO; if (Controller->FirmwareType != DAC960_V2_Controller) return -EINVAL; DataTransferLength = UserCommand.DataTransferLength; if (DataTransferLength > 0) { DataTransferBuffer = kmalloc(DataTransferLength, GFP_KERNEL); if (DataTransferBuffer == NULL) return -ENOMEM; memset(DataTransferBuffer, 0, DataTransferLength); } else if (DataTransferLength < 0) { DataTransferBuffer = kmalloc(-DataTransferLength, GFP_KERNEL); if (DataTransferBuffer == NULL) return -ENOMEM; if (copy_from_user(DataTransferBuffer, UserCommand.DataTransferBuffer, -DataTransferLength)) { ErrorCode = -EFAULT; goto Failure2; } } RequestSenseLength = UserCommand.RequestSenseLength; if (RequestSenseLength > 0) { RequestSenseBuffer = kmalloc(RequestSenseLength, GFP_KERNEL); if (RequestSenseBuffer == NULL) { ErrorCode = -ENOMEM; goto Failure2; } memset(RequestSenseBuffer, 0, RequestSenseLength); } DAC960_AcquireControllerLock(Controller, &ProcessorFlags); while ((Command = DAC960_AllocateCommand(Controller)) == NULL) DAC960_WaitForCommand(Controller); DAC960_ReleaseControllerLock(Controller, &ProcessorFlags); DAC960_V2_ClearCommand(Command); Command->CommandType = DAC960_ImmediateCommand; CommandMailbox = &Command->V2.CommandMailbox; memcpy(CommandMailbox, &UserCommand.CommandMailbox, sizeof(DAC960_V2_CommandMailbox_T)); CommandMailbox->Common.CommandControlBits .AdditionalScatterGatherListMemory = false; CommandMailbox->Common.CommandControlBits .NoAutoRequestSense = true; CommandMailbox->Common.DataTransferSize = 0; CommandMailbox->Common.DataTransferPageNumber = 0; memset(&CommandMailbox->Common.DataTransferMemoryAddress, 0, sizeof(DAC960_V2_DataTransferMemoryAddress_T)); if (DataTransferLength != 0) { if (DataTransferLength > 0) { CommandMailbox->Common.CommandControlBits .DataTransferControllerToHost = true; CommandMailbox->Common.DataTransferSize = DataTransferLength; } else { CommandMailbox->Common.CommandControlBits .DataTransferControllerToHost = false; CommandMailbox->Common.DataTransferSize = -DataTransferLength; } CommandMailbox->Common.DataTransferMemoryAddress .ScatterGatherSegments[0] .SegmentDataPointer = Virtual_to_Bus64(DataTransferBuffer); CommandMailbox->Common.DataTransferMemoryAddress .ScatterGatherSegments[0] .SegmentByteCount = CommandMailbox->Common.DataTransferSize; } if (RequestSenseLength > 0) { CommandMailbox->Common.CommandControlBits .NoAutoRequestSense = false; CommandMailbox->Common.RequestSenseSize = RequestSenseLength; CommandMailbox->Common.RequestSenseBusAddress = Virtual_to_Bus64(RequestSenseBuffer); } DAC960_ExecuteCommand(Command); CommandStatus = Command->V2.CommandStatus; RequestSenseLength = Command->V2.RequestSenseLength; DataTransferResidue = Command->V2.DataTransferResidue; DAC960_AcquireControllerLock(Controller, &ProcessorFlags); DAC960_DeallocateCommand(Command); DAC960_ReleaseControllerLock(Controller, &ProcessorFlags); if (RequestSenseLength > UserCommand.RequestSenseLength) RequestSenseLength = UserCommand.RequestSenseLength; if (copy_to_user(&UserSpaceUserCommand->DataTransferLength, &DataTransferResidue, sizeof(DataTransferResidue))) { ErrorCode = -EFAULT; goto Failure2; } if (copy_to_user(&UserSpaceUserCommand->RequestSenseLength, &RequestSenseLength, sizeof(RequestSenseLength))) { ErrorCode = -EFAULT; goto Failure2; } if (DataTransferLength > 0) { if (copy_to_user(UserCommand.DataTransferBuffer, DataTransferBuffer, DataTransferLength)) { ErrorCode = -EFAULT; goto Failure2; } } if (RequestSenseLength > 0) { if (copy_to_user(UserCommand.RequestSenseBuffer, RequestSenseBuffer, RequestSenseLength)) { ErrorCode = -EFAULT; goto Failure2; } } ErrorCode = CommandStatus; Failure2: if (DataTransferBuffer != NULL) kfree(DataTransferBuffer); if (RequestSenseBuffer != NULL) kfree(RequestSenseBuffer); return ErrorCode; } case DAC960_IOCTL_V2_GET_HEALTH_STATUS: { DAC960_V2_GetHealthStatus_T *UserSpaceGetHealthStatus = (DAC960_V2_GetHealthStatus_T *) Argument; DAC960_V2_GetHealthStatus_T GetHealthStatus; DAC960_V2_HealthStatusBuffer_T HealthStatusBuffer; DAC960_Controller_T *Controller; int ControllerNumber; if (UserSpaceGetHealthStatus == NULL) return -EINVAL; if (copy_from_user(&GetHealthStatus, UserSpaceGetHealthStatus, sizeof(DAC960_V2_GetHealthStatus_T))) return -EFAULT; ControllerNumber = GetHealthStatus.ControllerNumber; if (ControllerNumber < 0 || ControllerNumber > DAC960_ControllerCount - 1) return -ENXIO; Controller = DAC960_Controllers[ControllerNumber]; if (Controller == NULL) return -ENXIO; if (Controller->FirmwareType != DAC960_V2_Controller) return -EINVAL; if (copy_from_user(&HealthStatusBuffer, GetHealthStatus.HealthStatusBuffer, sizeof(DAC960_V2_HealthStatusBuffer_T))) return -EFAULT; while (Controller->V2.HealthStatusBuffer->StatusChangeCounter == HealthStatusBuffer.StatusChangeCounter && Controller->V2.HealthStatusBuffer->NextEventSequenceNumber == HealthStatusBuffer.NextEventSequenceNumber) { interruptible_sleep_on_timeout(&Controller->HealthStatusWaitQueue, DAC960_MonitoringTimerInterval); if (signal_pending(current)) return -EINTR; } if (copy_to_user(GetHealthStatus.HealthStatusBuffer, Controller->V2.HealthStatusBuffer, sizeof(DAC960_V2_HealthStatusBuffer_T))) return -EFAULT; return 0; } } return -EINVAL; } /* DAC960_KernelIOCTL is the Kernel IOCTL Function for the DAC960 Driver. */ int DAC960_KernelIOCTL(unsigned int Request, void *Argument) { switch (Request) { case DAC960_IOCTL_GET_CONTROLLER_COUNT: return DAC960_ControllerCount; case DAC960_IOCTL_GET_CONTROLLER_INFO: { DAC960_ControllerInfo_T *ControllerInfo = (DAC960_ControllerInfo_T *) Argument; DAC960_Controller_T *Controller; int ControllerNumber; if (ControllerInfo == NULL) return -EINVAL; ControllerNumber = ControllerInfo->ControllerNumber; if (ControllerNumber < 0 || ControllerNumber > DAC960_ControllerCount - 1) return -ENXIO; Controller = DAC960_Controllers[ControllerNumber]; if (Controller == NULL) return -ENXIO; memset(ControllerInfo, 0, sizeof(DAC960_ControllerInfo_T)); ControllerInfo->ControllerNumber = ControllerNumber; ControllerInfo->FirmwareType = Controller->FirmwareType; ControllerInfo->Channels = Controller->Channels; ControllerInfo->Targets = Controller->Targets; ControllerInfo->PCI_Bus = Controller->Bus; ControllerInfo->PCI_Device = Controller->Device; ControllerInfo->PCI_Function = Controller->Function; ControllerInfo->IRQ_Channel = Controller->IRQ_Channel; ControllerInfo->PCI_Address = Controller->PCI_Address; strcpy(ControllerInfo->ModelName, Controller->ModelName); strcpy(ControllerInfo->FirmwareVersion, Controller->FirmwareVersion); return 0; } case DAC960_IOCTL_V1_EXECUTE_COMMAND: { DAC960_V1_KernelCommand_T *KernelCommand = (DAC960_V1_KernelCommand_T *) Argument; DAC960_Controller_T *Controller; DAC960_Command_T *Command = NULL; DAC960_V1_CommandOpcode_T CommandOpcode; DAC960_V1_DCDB_T *DCDB = NULL; ProcessorFlags_T ProcessorFlags; int ControllerNumber, DataTransferLength; unsigned char *DataTransferBuffer = NULL; if (KernelCommand == NULL) return -EINVAL; ControllerNumber = KernelCommand->ControllerNumber; if (ControllerNumber < 0 || ControllerNumber > DAC960_ControllerCount - 1) return -ENXIO; Controller = DAC960_Controllers[ControllerNumber]; if (Controller == NULL) return -ENXIO; if (Controller->FirmwareType != DAC960_V1_Controller) return -EINVAL; CommandOpcode = KernelCommand->CommandMailbox.Common.CommandOpcode; DataTransferLength = KernelCommand->DataTransferLength; DataTransferBuffer = KernelCommand->DataTransferBuffer; if (CommandOpcode & 0x80) return -EINVAL; if (CommandOpcode == DAC960_V1_DCDB) { DCDB = KernelCommand->DCDB; if (DCDB->Channel >= DAC960_V1_MaxChannels) return -EINVAL; if (!((DataTransferLength == 0 && DCDB->Direction == DAC960_V1_DCDB_NoDataTransfer) || (DataTransferLength > 0 && DCDB->Direction == DAC960_V1_DCDB_DataTransferDeviceToSystem) || (DataTransferLength < 0 && DCDB->Direction == DAC960_V1_DCDB_DataTransferSystemToDevice))) return -EINVAL; if (((DCDB->TransferLengthHigh4 << 16) | DCDB->TransferLength) != abs(DataTransferLength)) return -EINVAL; } if (DataTransferLength != 0 && DataTransferBuffer == NULL) return -EINVAL; if (DataTransferLength > 0) memset(DataTransferBuffer, 0, DataTransferLength); if (CommandOpcode == DAC960_V1_DCDB) { DAC960_AcquireControllerLock(Controller, &ProcessorFlags); if (!Controller->V1.DirectCommandActive[DCDB->Channel] [DCDB->TargetID]) Command = DAC960_AllocateCommand(Controller); if (Command == NULL) { DAC960_ReleaseControllerLock(Controller, &ProcessorFlags); return -EBUSY; } else Controller->V1.DirectCommandActive[DCDB->Channel] [DCDB->TargetID] = true; DAC960_V1_ClearCommand(Command); Command->CommandType = DAC960_QueuedCommand; memcpy(&Command->V1.CommandMailbox, &KernelCommand->CommandMailbox, sizeof(DAC960_V1_CommandMailbox_T)); Command->V1.CommandMailbox.Type3.BusAddress = Virtual_to_Bus32(DCDB); Command->V1.KernelCommand = KernelCommand; DCDB->BusAddress = Virtual_to_Bus32(DataTransferBuffer); DAC960_QueueCommand(Command); DAC960_ReleaseControllerLock(Controller, &ProcessorFlags); } else { DAC960_AcquireControllerLock(Controller, &ProcessorFlags); Command = DAC960_AllocateCommand(Controller); if (Command == NULL) { DAC960_ReleaseControllerLock(Controller, &ProcessorFlags); return -EBUSY; } DAC960_V1_ClearCommand(Command); Command->CommandType = DAC960_QueuedCommand; memcpy(&Command->V1.CommandMailbox, &KernelCommand->CommandMailbox, sizeof(DAC960_V1_CommandMailbox_T)); if (DataTransferBuffer != NULL) Command->V1.CommandMailbox.Type3.BusAddress = Virtual_to_Bus32(DataTransferBuffer); Command->V1.KernelCommand = KernelCommand; DAC960_QueueCommand(Command); DAC960_ReleaseControllerLock(Controller, &ProcessorFlags); } return 0; } case DAC960_IOCTL_V2_EXECUTE_COMMAND: { DAC960_V2_KernelCommand_T *KernelCommand = (DAC960_V2_KernelCommand_T *) Argument; DAC960_Controller_T *Controller; DAC960_Command_T *Command = NULL; DAC960_V2_CommandMailbox_T *CommandMailbox; ProcessorFlags_T ProcessorFlags; int ControllerNumber, DataTransferLength, RequestSenseLength; unsigned char *DataTransferBuffer = NULL; unsigned char *RequestSenseBuffer = NULL; if (KernelCommand == NULL) return -EINVAL; ControllerNumber = KernelCommand->ControllerNumber; if (ControllerNumber < 0 || ControllerNumber > DAC960_ControllerCount - 1) return -ENXIO; Controller = DAC960_Controllers[ControllerNumber]; if (Controller == NULL) return -ENXIO; if (Controller->FirmwareType != DAC960_V2_Controller) return -EINVAL; DataTransferLength = KernelCommand->DataTransferLength; RequestSenseLength = KernelCommand->RequestSenseLength; DataTransferBuffer = KernelCommand->DataTransferBuffer; RequestSenseBuffer = KernelCommand->RequestSenseBuffer; if (DataTransferLength != 0 && DataTransferBuffer == NULL) return -EINVAL; if (RequestSenseLength < 0) return -EINVAL; if (RequestSenseLength > 0 && RequestSenseBuffer == NULL) return -EINVAL; if (DataTransferLength > 0) memset(DataTransferBuffer, 0, DataTransferLength); if (RequestSenseLength > 0) memset(RequestSenseBuffer, 0, RequestSenseLength); DAC960_AcquireControllerLock(Controller, &ProcessorFlags); Command = DAC960_AllocateCommand(Controller); if (Command == NULL) { DAC960_ReleaseControllerLock(Controller, &ProcessorFlags); return -EBUSY; } DAC960_V2_ClearCommand(Command); Command->CommandType = DAC960_QueuedCommand; CommandMailbox = &Command->V2.CommandMailbox; memcpy(CommandMailbox, &KernelCommand->CommandMailbox, sizeof(DAC960_V2_CommandMailbox_T)); CommandMailbox->Common.CommandControlBits .AdditionalScatterGatherListMemory = false; CommandMailbox->Common.CommandControlBits .NoAutoRequestSense = true; CommandMailbox->Common.DataTransferSize = 0; CommandMailbox->Common.DataTransferPageNumber = 0; memset(&CommandMailbox->Common.DataTransferMemoryAddress, 0, sizeof(DAC960_V2_DataTransferMemoryAddress_T)); if (DataTransferLength != 0) { if (DataTransferLength > 0) { CommandMailbox->Common.CommandControlBits .DataTransferControllerToHost = true; CommandMailbox->Common.DataTransferSize = DataTransferLength; } else { CommandMailbox->Common.CommandControlBits .DataTransferControllerToHost = false; CommandMailbox->Common.DataTransferSize = -DataTransferLength; } CommandMailbox->Common.DataTransferMemoryAddress .ScatterGatherSegments[0] .SegmentDataPointer = Virtual_to_Bus64(DataTransferBuffer); CommandMailbox->Common.DataTransferMemoryAddress .ScatterGatherSegments[0] .SegmentByteCount = CommandMailbox->Common.DataTransferSize; } if (RequestSenseLength > 0) { CommandMailbox->Common.CommandControlBits .NoAutoRequestSense = false; CommandMailbox->Common.RequestSenseBusAddress = Virtual_to_Bus64(RequestSenseBuffer); } Command->V2.KernelCommand = KernelCommand; DAC960_QueueCommand(Command); DAC960_ReleaseControllerLock(Controller, &ProcessorFlags); return 0; } } return -EINVAL; } /* DAC960_CheckStatusBuffer verifies that there is room to hold ByteCount additional bytes in the Combined Status Buffer and grows the buffer if necessary. It returns true if there is enough room and false otherwise. */ static boolean DAC960_CheckStatusBuffer(DAC960_Controller_T *Controller, unsigned int ByteCount) { unsigned char *NewStatusBuffer; if (Controller->InitialStatusLength + 1 + Controller->CurrentStatusLength + ByteCount + 1 <= Controller->CombinedStatusBufferLength) return true; if (Controller->CombinedStatusBufferLength == 0) { unsigned int NewStatusBufferLength = DAC960_InitialStatusBufferSize; while (NewStatusBufferLength < ByteCount) NewStatusBufferLength *= 2; Controller->CombinedStatusBuffer = (unsigned char *) kmalloc(NewStatusBufferLength, GFP_ATOMIC); if (Controller->CombinedStatusBuffer == NULL) return false; Controller->CombinedStatusBufferLength = NewStatusBufferLength; return true; } NewStatusBuffer = (unsigned char *) kmalloc(2 * Controller->CombinedStatusBufferLength, GFP_ATOMIC); if (NewStatusBuffer == NULL) { DAC960_Warning("Unable to expand Combined Status Buffer - Truncating\n", Controller); return false; } memcpy(NewStatusBuffer, Controller->CombinedStatusBuffer, Controller->CombinedStatusBufferLength); kfree(Controller->CombinedStatusBuffer); Controller->CombinedStatusBuffer = NewStatusBuffer; Controller->CombinedStatusBufferLength *= 2; Controller->CurrentStatusBuffer = &NewStatusBuffer[Controller->InitialStatusLength + 1]; return true; } /* DAC960_Message prints Driver Messages. */ static void DAC960_Message(DAC960_MessageLevel_T MessageLevel, unsigned char *Format, DAC960_Controller_T *Controller, ...) { static unsigned char Buffer[DAC960_LineBufferSize]; static boolean BeginningOfLine = true; va_list Arguments; int Length = 0; va_start(Arguments, Controller); Length = vsprintf(Buffer, Format, Arguments); va_end(Arguments); if (Controller == NULL) printk("%sDAC960#%d: %s", DAC960_MessageLevelMap[MessageLevel], DAC960_ControllerCount, Buffer); else if (MessageLevel == DAC960_AnnounceLevel || MessageLevel == DAC960_InfoLevel) { if (!Controller->ControllerInitialized) { if (DAC960_CheckStatusBuffer(Controller, Length)) { strcpy(&Controller->CombinedStatusBuffer [Controller->InitialStatusLength], Buffer); Controller->InitialStatusLength += Length; Controller->CurrentStatusBuffer = &Controller->CombinedStatusBuffer [Controller->InitialStatusLength + 1]; } if (MessageLevel == DAC960_AnnounceLevel) { static int AnnouncementLines = 0; if (++AnnouncementLines <= 2) printk("%sDAC960: %s", DAC960_MessageLevelMap[MessageLevel], Buffer); } else { if (BeginningOfLine) { if (Buffer[0] != '\n' || Length > 1) printk("%sDAC960#%d: %s", DAC960_MessageLevelMap[MessageLevel], Controller->ControllerNumber, Buffer); } else printk("%s", Buffer); } } else if (DAC960_CheckStatusBuffer(Controller, Length)) { strcpy(&Controller->CurrentStatusBuffer[ Controller->CurrentStatusLength], Buffer); Controller->CurrentStatusLength += Length; } } else if (MessageLevel == DAC960_ProgressLevel) { strcpy(Controller->ProgressBuffer, Buffer); Controller->ProgressBufferLength = Length; if (Controller->EphemeralProgressMessage) { if (jiffies - Controller->LastProgressReportTime >= DAC960_ProgressReportingInterval) { printk("%sDAC960#%d: %s", DAC960_MessageLevelMap[MessageLevel], Controller->ControllerNumber, Buffer); Controller->LastProgressReportTime = jiffies; } } else printk("%sDAC960#%d: %s", DAC960_MessageLevelMap[MessageLevel], Controller->ControllerNumber, Buffer); } else if (MessageLevel == DAC960_UserCriticalLevel) { strcpy(&Controller->UserStatusBuffer[Controller->UserStatusLength], Buffer); Controller->UserStatusLength += Length; if (Buffer[0] != '\n' || Length > 1) printk("%sDAC960#%d: %s", DAC960_MessageLevelMap[MessageLevel], Controller->ControllerNumber, Buffer); } else { if (BeginningOfLine) printk("%sDAC960#%d: %s", DAC960_MessageLevelMap[MessageLevel], Controller->ControllerNumber, Buffer); else printk("%s", Buffer); } BeginningOfLine = (Buffer[Length-1] == '\n'); } /* DAC960_ParsePhysicalDevice parses spaces followed by a Physical Device Channel:TargetID specification from a User Command string. It updates Channel and TargetID and returns true on success and false on failure. */ static boolean DAC960_ParsePhysicalDevice(DAC960_Controller_T *Controller, char *UserCommandString, unsigned char *Channel, unsigned char *TargetID) { char *NewUserCommandString = UserCommandString; unsigned long XChannel, XTargetID; while (*UserCommandString == ' ') UserCommandString++; if (UserCommandString == NewUserCommandString) return false; XChannel = simple_strtoul(UserCommandString, &NewUserCommandString, 10); if (NewUserCommandString == UserCommandString || *NewUserCommandString != ':' || XChannel >= Controller->Channels) return false; UserCommandString = ++NewUserCommandString; XTargetID = simple_strtoul(UserCommandString, &NewUserCommandString, 10); if (NewUserCommandString == UserCommandString || *NewUserCommandString != '\0' || XTargetID >= Controller->Targets) return false; *Channel = XChannel; *TargetID = XTargetID; return true; } /* DAC960_ParseLogicalDrive parses spaces followed by a Logical Drive Number specification from a User Command string. It updates LogicalDriveNumber and returns true on success and false on failure. */ static boolean DAC960_ParseLogicalDrive(DAC960_Controller_T *Controller, char *UserCommandString, unsigned char *LogicalDriveNumber) { char *NewUserCommandString = UserCommandString; unsigned long XLogicalDriveNumber; while (*UserCommandString == ' ') UserCommandString++; if (UserCommandString == NewUserCommandString) return false; XLogicalDriveNumber = simple_strtoul(UserCommandString, &NewUserCommandString, 10); if (NewUserCommandString == UserCommandString || *NewUserCommandString != '\0' || XLogicalDriveNumber > DAC960_MaxLogicalDrives - 1) return false; *LogicalDriveNumber = XLogicalDriveNumber; return true; } /* DAC960_V1_SetDeviceState sets the Device State for a Physical Device for DAC960 V1 Firmware Controllers. */ static void DAC960_V1_SetDeviceState(DAC960_Controller_T *Controller, DAC960_Command_T *Command, unsigned char Channel, unsigned char TargetID, DAC960_V1_PhysicalDeviceState_T DeviceState, const unsigned char *DeviceStateString) { DAC960_V1_CommandMailbox_T *CommandMailbox = &Command->V1.CommandMailbox; CommandMailbox->Type3D.CommandOpcode = DAC960_V1_StartDevice; CommandMailbox->Type3D.Channel = Channel; CommandMailbox->Type3D.TargetID = TargetID; CommandMailbox->Type3D.DeviceState = DeviceState; CommandMailbox->Type3D.Modifier = 0; DAC960_ExecuteCommand(Command); switch (Command->V1.CommandStatus) { case DAC960_V1_NormalCompletion: DAC960_UserCritical("%s of Physical Device %d:%d Succeeded\n", Controller, DeviceStateString, Channel, TargetID); break; case DAC960_V1_UnableToStartDevice: DAC960_UserCritical("%s of Physical Device %d:%d Failed - " "Unable to Start Device\n", Controller, DeviceStateString, Channel, TargetID); break; case DAC960_V1_NoDeviceAtAddress: DAC960_UserCritical("%s of Physical Device %d:%d Failed - " "No Device at Address\n", Controller, DeviceStateString, Channel, TargetID); break; case DAC960_V1_InvalidChannelOrTargetOrModifier: DAC960_UserCritical("%s of Physical Device %d:%d Failed - " "Invalid Channel or Target or Modifier\n", Controller, DeviceStateString, Channel, TargetID); break; case DAC960_V1_ChannelBusy: DAC960_UserCritical("%s of Physical Device %d:%d Failed - " "Channel Busy\n", Controller, DeviceStateString, Channel, TargetID); break; default: DAC960_UserCritical("%s of Physical Device %d:%d Failed - " "Unexpected Status %04X\n", Controller, DeviceStateString, Channel, TargetID, Command->V1.CommandStatus); break; } } /* DAC960_V1_ExecuteUserCommand executes a User Command for DAC960 V1 Firmware Controllers. */ static boolean DAC960_V1_ExecuteUserCommand(DAC960_Controller_T *Controller, unsigned char *UserCommand) { DAC960_Command_T *Command; DAC960_V1_CommandMailbox_T *CommandMailbox; ProcessorFlags_T ProcessorFlags; unsigned char Channel, TargetID, LogicalDriveNumber; DAC960_AcquireControllerLock(Controller, &ProcessorFlags); while ((Command = DAC960_AllocateCommand(Controller)) == NULL) DAC960_WaitForCommand(Controller); DAC960_ReleaseControllerLock(Controller, &ProcessorFlags); Controller->UserStatusLength = 0; DAC960_V1_ClearCommand(Command); Command->CommandType = DAC960_ImmediateCommand; CommandMailbox = &Command->V1.CommandMailbox; if (strcmp(UserCommand, "flush-cache") == 0) { CommandMailbox->Type3.CommandOpcode = DAC960_V1_Flush; DAC960_ExecuteCommand(Command); DAC960_UserCritical("Cache Flush Completed\n", Controller); } else if (strncmp(UserCommand, "kill", 4) == 0 && DAC960_ParsePhysicalDevice(Controller, &UserCommand[4], &Channel, &TargetID)) { DAC960_V1_DeviceState_T *DeviceState = &Controller->V1.DeviceState[Channel][TargetID]; if (DeviceState->Present && DeviceState->DeviceType == DAC960_V1_DiskType && DeviceState->DeviceState != DAC960_V1_Device_Dead) DAC960_V1_SetDeviceState(Controller, Command, Channel, TargetID, DAC960_V1_Device_Dead, "Kill"); else DAC960_UserCritical("Kill of Physical Device %d:%d Illegal\n", Controller, Channel, TargetID); } else if (strncmp(UserCommand, "make-online", 11) == 0 && DAC960_ParsePhysicalDevice(Controller, &UserCommand[11], &Channel, &TargetID)) { DAC960_V1_DeviceState_T *DeviceState = &Controller->V1.DeviceState[Channel][TargetID]; if (DeviceState->Present && DeviceState->DeviceType == DAC960_V1_DiskType && DeviceState->DeviceState == DAC960_V1_Device_Dead) DAC960_V1_SetDeviceState(Controller, Command, Channel, TargetID, DAC960_V1_Device_Online, "Make Online"); else DAC960_UserCritical("Make Online of Physical Device %d:%d Illegal\n", Controller, Channel, TargetID); } else if (strncmp(UserCommand, "make-standby", 12) == 0 && DAC960_ParsePhysicalDevice(Controller, &UserCommand[12], &Channel, &TargetID)) { DAC960_V1_DeviceState_T *DeviceState = &Controller->V1.DeviceState[Channel][TargetID]; if (DeviceState->Present && DeviceState->DeviceType == DAC960_V1_DiskType && DeviceState->DeviceState == DAC960_V1_Device_Dead) DAC960_V1_SetDeviceState(Controller, Command, Channel, TargetID, DAC960_V1_Device_Standby, "Make Standby"); else DAC960_UserCritical("Make Standby of Physical " "Device %d:%d Illegal\n", Controller, Channel, TargetID); } else if (strncmp(UserCommand, "rebuild", 7) == 0 && DAC960_ParsePhysicalDevice(Controller, &UserCommand[7], &Channel, &TargetID)) { CommandMailbox->Type3D.CommandOpcode = DAC960_V1_RebuildAsync; CommandMailbox->Type3D.Channel = Channel; CommandMailbox->Type3D.TargetID = TargetID; DAC960_ExecuteCommand(Command); switch (Command->V1.CommandStatus) { case DAC960_V1_NormalCompletion: DAC960_UserCritical("Rebuild of Physical Device %d:%d Initiated\n", Controller, Channel, TargetID); break; case DAC960_V1_AttemptToRebuildOnlineDrive: DAC960_UserCritical("Rebuild of Physical Device %d:%d Failed - " "Attempt to Rebuild Online or " "Unresponsive Drive\n", Controller, Channel, TargetID); break; case DAC960_V1_NewDiskFailedDuringRebuild: DAC960_UserCritical("Rebuild of Physical Device %d:%d Failed - " "New Disk Failed During Rebuild\n", Controller, Channel, TargetID); break; case DAC960_V1_InvalidDeviceAddress: DAC960_UserCritical("Rebuild of Physical Device %d:%d Failed - " "Invalid Device Address\n", Controller, Channel, TargetID); break; case DAC960_V1_RebuildOrCheckAlreadyInProgress: DAC960_UserCritical("Rebuild of Physical Device %d:%d Failed - " "Rebuild or Consistency Check Already " "in Progress\n", Controller, Channel, TargetID); break; default: DAC960_UserCritical("Rebuild of Physical Device %d:%d Failed - " "Unexpected Status %04X\n", Controller, Channel, TargetID, Command->V1.CommandStatus); break; } } else if (strncmp(UserCommand, "check-consistency", 17) == 0 && DAC960_ParseLogicalDrive(Controller, &UserCommand[17], &LogicalDriveNumber)) { CommandMailbox->Type3C.CommandOpcode = DAC960_V1_CheckConsistencyAsync; CommandMailbox->Type3C.LogicalDriveNumber = LogicalDriveNumber; CommandMailbox->Type3C.AutoRestore = true; DAC960_ExecuteCommand(Command); switch (Command->V1.CommandStatus) { case DAC960_V1_NormalCompletion: DAC960_UserCritical("Consistency Check of Logical Drive %d " "(/dev/rd/c%dd%d) Initiated\n", Controller, LogicalDriveNumber, Controller->ControllerNumber, LogicalDriveNumber); break; case DAC960_V1_DependentDiskIsDead: DAC960_UserCritical("Consistency Check of Logical Drive %d " "(/dev/rd/c%dd%d) Failed - " "Dependent Physical Device is DEAD\n", Controller, LogicalDriveNumber, Controller->ControllerNumber, LogicalDriveNumber); break; case DAC960_V1_InvalidOrNonredundantLogicalDrive: DAC960_UserCritical("Consistency Check of Logical Drive %d " "(/dev/rd/c%dd%d) Failed - " "Invalid or Nonredundant Logical Drive\n", Controller, LogicalDriveNumber, Controller->ControllerNumber, LogicalDriveNumber); break; case DAC960_V1_RebuildOrCheckAlreadyInProgress: DAC960_UserCritical("Consistency Check of Logical Drive %d " "(/dev/rd/c%dd%d) Failed - Rebuild or " "Consistency Check Already in Progress\n", Controller, LogicalDriveNumber, Controller->ControllerNumber, LogicalDriveNumber); break; default: DAC960_UserCritical("Consistency Check of Logical Drive %d " "(/dev/rd/c%dd%d) Failed - " "Unexpected Status %04X\n", Controller, LogicalDriveNumber, Controller->ControllerNumber, LogicalDriveNumber, Command->V1.CommandStatus); break; } } else if (strcmp(UserCommand, "cancel-rebuild") == 0 || strcmp(UserCommand, "cancel-consistency-check") == 0) { unsigned char OldRebuildRateConstant; CommandMailbox->Type3R.CommandOpcode = DAC960_V1_RebuildControl; CommandMailbox->Type3R.RebuildRateConstant = 0xFF; CommandMailbox->Type3R.BusAddress = Virtual_to_Bus32(&OldRebuildRateConstant); DAC960_ExecuteCommand(Command); switch (Command->V1.CommandStatus) { case DAC960_V1_NormalCompletion: DAC960_UserCritical("Rebuild or Consistency Check Cancelled\n", Controller); break; default: DAC960_UserCritical("Cancellation of Rebuild or " "Consistency Check Failed - " "Unexpected Status %04X\n", Controller, Command->V1.CommandStatus); break; } } else DAC960_UserCritical("Illegal User Command: '%s'\n", Controller, UserCommand); DAC960_AcquireControllerLock(Controller, &ProcessorFlags); DAC960_DeallocateCommand(Command); DAC960_ReleaseControllerLock(Controller, &ProcessorFlags); return true; } /* DAC960_V2_TranslatePhysicalDevice translates a Physical Device Channel and TargetID into a Logical Device. It returns true on success and false on failure. */ static boolean DAC960_V2_TranslatePhysicalDevice(DAC960_Command_T *Command, unsigned char Channel, unsigned char TargetID, unsigned short *LogicalDeviceNumber) { DAC960_V2_CommandMailbox_T SavedCommandMailbox, *CommandMailbox; DAC960_V2_PhysicalToLogicalDevice_T PhysicalToLogicalDevice; CommandMailbox = &Command->V2.CommandMailbox; memcpy(&SavedCommandMailbox, CommandMailbox, sizeof(DAC960_V2_CommandMailbox_T)); CommandMailbox->PhysicalDeviceInfo.CommandOpcode = DAC960_V2_IOCTL; CommandMailbox->PhysicalDeviceInfo.CommandControlBits .DataTransferControllerToHost = true; CommandMailbox->PhysicalDeviceInfo.CommandControlBits .NoAutoRequestSense = true; CommandMailbox->PhysicalDeviceInfo.DataTransferSize = sizeof(DAC960_V2_PhysicalToLogicalDevice_T); CommandMailbox->PhysicalDeviceInfo.PhysicalDevice.TargetID = TargetID; CommandMailbox->PhysicalDeviceInfo.PhysicalDevice.Channel = Channel; CommandMailbox->PhysicalDeviceInfo.IOCTL_Opcode = DAC960_V2_TranslatePhysicalToLogicalDevice; CommandMailbox->Common.DataTransferMemoryAddress .ScatterGatherSegments[0] .SegmentDataPointer = Virtual_to_Bus64(&PhysicalToLogicalDevice); CommandMailbox->Common.DataTransferMemoryAddress .ScatterGatherSegments[0] .SegmentByteCount = CommandMailbox->Common.DataTransferSize; DAC960_ExecuteCommand(Command); memcpy(CommandMailbox, &SavedCommandMailbox, sizeof(DAC960_V2_CommandMailbox_T)); *LogicalDeviceNumber = PhysicalToLogicalDevice.LogicalDeviceNumber; return (Command->V2.CommandStatus == DAC960_V2_NormalCompletion); } /* DAC960_V2_ExecuteUserCommand executes a User Command for DAC960 V2 Firmware Controllers. */ static boolean DAC960_V2_ExecuteUserCommand(DAC960_Controller_T *Controller, unsigned char *UserCommand) { DAC960_Command_T *Command; DAC960_V2_CommandMailbox_T *CommandMailbox; ProcessorFlags_T ProcessorFlags; unsigned char Channel, TargetID, LogicalDriveNumber; unsigned short LogicalDeviceNumber; DAC960_AcquireControllerLock(Controller, &ProcessorFlags); while ((Command = DAC960_AllocateCommand(Controller)) == NULL) DAC960_WaitForCommand(Controller); DAC960_ReleaseControllerLock(Controller, &ProcessorFlags); Controller->UserStatusLength = 0; DAC960_V2_ClearCommand(Command); Command->CommandType = DAC960_ImmediateCommand; CommandMailbox = &Command->V2.CommandMailbox; CommandMailbox->Common.CommandOpcode = DAC960_V2_IOCTL; CommandMailbox->Common.CommandControlBits.DataTransferControllerToHost = true; CommandMailbox->Common.CommandControlBits.NoAutoRequestSense = true; if (strcmp(UserCommand, "flush-cache") == 0) { CommandMailbox->DeviceOperation.IOCTL_Opcode = DAC960_V2_PauseDevice; CommandMailbox->DeviceOperation.OperationDevice = DAC960_V2_RAID_Controller; DAC960_ExecuteCommand(Command); DAC960_UserCritical("Cache Flush Completed\n", Controller); } else if (strncmp(UserCommand, "kill", 4) == 0 && DAC960_ParsePhysicalDevice(Controller, &UserCommand[4], &Channel, &TargetID) && DAC960_V2_TranslatePhysicalDevice(Command, Channel, TargetID, &LogicalDeviceNumber)) { CommandMailbox->SetDeviceState.LogicalDevice.LogicalDeviceNumber = LogicalDeviceNumber; CommandMailbox->SetDeviceState.IOCTL_Opcode = DAC960_V2_SetDeviceState; CommandMailbox->SetDeviceState.DeviceState.PhysicalDeviceState = DAC960_V2_Device_Dead; DAC960_ExecuteCommand(Command); DAC960_UserCritical("Kill of Physical Device %d:%d %s\n", Controller, Channel, TargetID, (Command->V2.CommandStatus == DAC960_V2_NormalCompletion ? "Succeeded" : "Failed")); } else if (strncmp(UserCommand, "make-online", 11) == 0 && DAC960_ParsePhysicalDevice(Controller, &UserCommand[11], &Channel, &TargetID) && DAC960_V2_TranslatePhysicalDevice(Command, Channel, TargetID, &LogicalDeviceNumber)) { CommandMailbox->SetDeviceState.LogicalDevice.LogicalDeviceNumber = LogicalDeviceNumber; CommandMailbox->SetDeviceState.IOCTL_Opcode = DAC960_V2_SetDeviceState; CommandMailbox->SetDeviceState.DeviceState.PhysicalDeviceState = DAC960_V2_Device_Online; DAC960_ExecuteCommand(Command); DAC960_UserCritical("Make Online of Physical Device %d:%d %s\n", Controller, Channel, TargetID, (Command->V2.CommandStatus == DAC960_V2_NormalCompletion ? "Succeeded" : "Failed")); } else if (strncmp(UserCommand, "make-standby", 12) == 0 && DAC960_ParsePhysicalDevice(Controller, &UserCommand[12], &Channel, &TargetID) && DAC960_V2_TranslatePhysicalDevice(Command, Channel, TargetID, &LogicalDeviceNumber)) { CommandMailbox->SetDeviceState.LogicalDevice.LogicalDeviceNumber = LogicalDeviceNumber; CommandMailbox->SetDeviceState.IOCTL_Opcode = DAC960_V2_SetDeviceState; CommandMailbox->SetDeviceState.DeviceState.PhysicalDeviceState = DAC960_V2_Device_Standby; DAC960_ExecuteCommand(Command); DAC960_UserCritical("Make Standby of Physical Device %d:%d %s\n", Controller, Channel, TargetID, (Command->V2.CommandStatus == DAC960_V2_NormalCompletion ? "Succeeded" : "Failed")); } else if (strncmp(UserCommand, "rebuild", 7) == 0 && DAC960_ParsePhysicalDevice(Controller, &UserCommand[7], &Channel, &TargetID) && DAC960_V2_TranslatePhysicalDevice(Command, Channel, TargetID, &LogicalDeviceNumber)) { CommandMailbox->LogicalDeviceInfo.LogicalDevice.LogicalDeviceNumber = LogicalDeviceNumber; CommandMailbox->LogicalDeviceInfo.IOCTL_Opcode = DAC960_V2_RebuildDeviceStart; DAC960_ExecuteCommand(Command); DAC960_UserCritical("Rebuild of Physical Device %d:%d %s\n", Controller, Channel, TargetID, (Command->V2.CommandStatus == DAC960_V2_NormalCompletion ? "Initiated" : "Not Initiated")); } else if (strncmp(UserCommand, "cancel-rebuild", 14) == 0 && DAC960_ParsePhysicalDevice(Controller, &UserCommand[14], &Channel, &TargetID) && DAC960_V2_TranslatePhysicalDevice(Command, Channel, TargetID, &LogicalDeviceNumber)) { CommandMailbox->LogicalDeviceInfo.LogicalDevice.LogicalDeviceNumber = LogicalDeviceNumber; CommandMailbox->LogicalDeviceInfo.IOCTL_Opcode = DAC960_V2_RebuildDeviceStop; DAC960_ExecuteCommand(Command); DAC960_UserCritical("Rebuild of Physical Device %d:%d %s\n", Controller, Channel, TargetID, (Command->V2.CommandStatus == DAC960_V2_NormalCompletion ? "Cancelled" : "Not Cancelled")); } else if (strncmp(UserCommand, "check-consistency", 17) == 0 && DAC960_ParseLogicalDrive(Controller, &UserCommand[17], &LogicalDriveNumber)) { CommandMailbox->ConsistencyCheck.LogicalDevice.LogicalDeviceNumber = LogicalDriveNumber; CommandMailbox->ConsistencyCheck.IOCTL_Opcode = DAC960_V2_ConsistencyCheckStart; CommandMailbox->ConsistencyCheck.RestoreConsistency = true; CommandMailbox->ConsistencyCheck.InitializedAreaOnly = false; DAC960_ExecuteCommand(Command); DAC960_UserCritical("Consistency Check of Logical Drive %d " "(/dev/rd/c%dd%d) %s\n", Controller, LogicalDriveNumber, Controller->ControllerNumber, LogicalDriveNumber, (Command->V2.CommandStatus == DAC960_V2_NormalCompletion ? "Initiated" : "Not Initiated")); } else if (strncmp(UserCommand, "cancel-consistency-check", 24) == 0 && DAC960_ParseLogicalDrive(Controller, &UserCommand[24], &LogicalDriveNumber)) { CommandMailbox->ConsistencyCheck.LogicalDevice.LogicalDeviceNumber = LogicalDriveNumber; CommandMailbox->ConsistencyCheck.IOCTL_Opcode = DAC960_V2_ConsistencyCheckStop; DAC960_ExecuteCommand(Command); DAC960_UserCritical("Consistency Check of Logical Drive %d " "(/dev/rd/c%dd%d) %s\n", Controller, LogicalDriveNumber, Controller->ControllerNumber, LogicalDriveNumber, (Command->V2.CommandStatus == DAC960_V2_NormalCompletion ? "Cancelled" : "Not Cancelled")); } else if (strcmp(UserCommand, "perform-discovery") == 0) { CommandMailbox->Common.IOCTL_Opcode = DAC960_V2_StartDiscovery; DAC960_ExecuteCommand(Command); DAC960_UserCritical("Discovery %s\n", Controller, (Command->V2.CommandStatus == DAC960_V2_NormalCompletion ? "Initiated" : "Not Initiated")); if (Command->V2.CommandStatus == DAC960_V2_NormalCompletion) { CommandMailbox->ControllerInfo.CommandOpcode = DAC960_V2_IOCTL; CommandMailbox->ControllerInfo.CommandControlBits .DataTransferControllerToHost = true; CommandMailbox->ControllerInfo.CommandControlBits .NoAutoRequestSense = true; CommandMailbox->ControllerInfo.DataTransferSize = sizeof(DAC960_V2_ControllerInfo_T); CommandMailbox->ControllerInfo.ControllerNumber = 0; CommandMailbox->ControllerInfo.IOCTL_Opcode = DAC960_V2_GetControllerInfo; CommandMailbox->ControllerInfo.DataTransferMemoryAddress .ScatterGatherSegments[0] .SegmentDataPointer = Virtual_to_Bus64(&Controller->V2.NewControllerInformation); CommandMailbox->ControllerInfo.DataTransferMemoryAddress .ScatterGatherSegments[0] .SegmentByteCount = CommandMailbox->ControllerInfo.DataTransferSize; DAC960_ExecuteCommand(Command); while (Controller->V2.NewControllerInformation.PhysicalScanActive) { DAC960_ExecuteCommand(Command); sleep_on_timeout(&Controller->CommandWaitQueue, HZ); } DAC960_UserCritical("Discovery Completed\n", Controller); } } else if (strcmp(UserCommand, "suppress-enclosure-messages") == 0) Controller->SuppressEnclosureMessages = true; else DAC960_UserCritical("Illegal User Command: '%s'\n", Controller, UserCommand); DAC960_AcquireControllerLock(Controller, &ProcessorFlags); DAC960_DeallocateCommand(Command); DAC960_ReleaseControllerLock(Controller, &ProcessorFlags); return true; } /* DAC960_ProcReadStatus implements reading /proc/rd/status. */ static int DAC960_ProcReadStatus(char *Page, char **Start, off_t Offset, int Count, int *EOF, void *Data) { unsigned char *StatusMessage = "OK\n"; int ControllerNumber, BytesAvailable; for (ControllerNumber = 0; ControllerNumber < DAC960_ControllerCount; ControllerNumber++) { DAC960_Controller_T *Controller = DAC960_Controllers[ControllerNumber]; if (Controller == NULL) continue; if (Controller->MonitoringAlertMode) { StatusMessage = "ALERT\n"; break; } } BytesAvailable = strlen(StatusMessage) - Offset; if (Count >= BytesAvailable) { Count = BytesAvailable; *EOF = true; } if (Count <= 0) return 0; *Start = Page; memcpy(Page, &StatusMessage[Offset], Count); return Count; } /* DAC960_ProcReadInitialStatus implements reading /proc/rd/cN/initial_status. */ static int DAC960_ProcReadInitialStatus(char *Page, char **Start, off_t Offset, int Count, int *EOF, void *Data) { DAC960_Controller_T *Controller = (DAC960_Controller_T *) Data; int BytesAvailable = Controller->InitialStatusLength - Offset; if (Count >= BytesAvailable) { Count = BytesAvailable; *EOF = true; } if (Count <= 0) return 0; *Start = Page; memcpy(Page, &Controller->CombinedStatusBuffer[Offset], Count); return Count; } /* DAC960_ProcReadCurrentStatus implements reading /proc/rd/cN/current_status. */ static int DAC960_ProcReadCurrentStatus(char *Page, char **Start, off_t Offset, int Count, int *EOF, void *Data) { DAC960_Controller_T *Controller = (DAC960_Controller_T *) Data; unsigned char *StatusMessage = "No Rebuild or Consistency Check in Progress\n"; int ProgressMessageLength = strlen(StatusMessage); int BytesAvailable; if (jiffies != Controller->LastCurrentStatusTime) { Controller->CurrentStatusLength = 0; DAC960_AnnounceDriver(Controller); DAC960_ReportControllerConfiguration(Controller); DAC960_ReportDeviceConfiguration(Controller); if (Controller->ProgressBufferLength > 0) ProgressMessageLength = Controller->ProgressBufferLength; if (DAC960_CheckStatusBuffer(Controller, 2 + ProgressMessageLength)) { unsigned char *CurrentStatusBuffer = Controller->CurrentStatusBuffer; CurrentStatusBuffer[Controller->CurrentStatusLength++] = ' '; CurrentStatusBuffer[Controller->CurrentStatusLength++] = ' '; if (Controller->ProgressBufferLength > 0) strcpy(&CurrentStatusBuffer[Controller->CurrentStatusLength], Controller->ProgressBuffer); else strcpy(&CurrentStatusBuffer[Controller->CurrentStatusLength], StatusMessage); Controller->CurrentStatusLength += ProgressMessageLength; } Controller->LastCurrentStatusTime = jiffies; } BytesAvailable = Controller->CurrentStatusLength - Offset; if (Count >= BytesAvailable) { Count = BytesAvailable; *EOF = true; } if (Count <= 0) return 0; *Start = Page; memcpy(Page, &Controller->CurrentStatusBuffer[Offset], Count); return Count; } /* DAC960_ProcReadUserCommand implements reading /proc/rd/cN/user_command. */ static int DAC960_ProcReadUserCommand(char *Page, char **Start, off_t Offset, int Count, int *EOF, void *Data) { DAC960_Controller_T *Controller = (DAC960_Controller_T *) Data; int BytesAvailable = Controller->UserStatusLength - Offset; if (Count >= BytesAvailable) { Count = BytesAvailable; *EOF = true; } if (Count <= 0) return 0; *Start = Page; memcpy(Page, &Controller->UserStatusBuffer[Offset], Count); return Count; } /* DAC960_ProcWriteUserCommand implements writing /proc/rd/cN/user_command. */ static int DAC960_ProcWriteUserCommand(File_T *File, const char *Buffer, unsigned long Count, void *Data) { DAC960_Controller_T *Controller = (DAC960_Controller_T *) Data; unsigned char CommandBuffer[80]; int Length; if (Count > sizeof(CommandBuffer)-1) return -EINVAL; if (copy_from_user(CommandBuffer, Buffer, Count)) return -EFAULT; CommandBuffer[Count] = '\0'; Length = strlen(CommandBuffer); if (CommandBuffer[Length-1] == '\n') CommandBuffer[--Length] = '\0'; if (Controller->FirmwareType == DAC960_V1_Controller) return (DAC960_V1_ExecuteUserCommand(Controller, CommandBuffer) ? Count : -EBUSY); else return (DAC960_V2_ExecuteUserCommand(Controller, CommandBuffer) ? Count : -EBUSY); } /* DAC960_CreateProcEntries creates the /proc/rd/... entries for the DAC960 Driver. */ static void DAC960_CreateProcEntries(void) { PROC_DirectoryEntry_T *StatusProcEntry; int ControllerNumber; DAC960_ProcDirectoryEntry = proc_mkdir("rd", NULL); StatusProcEntry = create_proc_read_entry("status", 0, DAC960_ProcDirectoryEntry, DAC960_ProcReadStatus, NULL); for (ControllerNumber = 0; ControllerNumber < DAC960_ControllerCount; ControllerNumber++) { DAC960_Controller_T *Controller = DAC960_Controllers[ControllerNumber]; PROC_DirectoryEntry_T *ControllerProcEntry; PROC_DirectoryEntry_T *UserCommandProcEntry; if (Controller == NULL) continue; sprintf(Controller->ControllerName, "c%d", Controller->ControllerNumber); ControllerProcEntry = proc_mkdir(Controller->ControllerName, DAC960_ProcDirectoryEntry); create_proc_read_entry("initial_status", 0, ControllerProcEntry, DAC960_ProcReadInitialStatus, Controller); create_proc_read_entry("current_status", 0, ControllerProcEntry, DAC960_ProcReadCurrentStatus, Controller); UserCommandProcEntry = create_proc_read_entry("user_command", S_IWUSR | S_IRUSR, ControllerProcEntry, DAC960_ProcReadUserCommand, Controller); UserCommandProcEntry->write_proc = DAC960_ProcWriteUserCommand; Controller->ControllerProcEntry = ControllerProcEntry; } } /* DAC960_DestroyProcEntries destroys the /proc/rd/... entries for the DAC960 Driver. */ static void DAC960_DestroyProcEntries(void) { int ControllerNumber; for (ControllerNumber = 0; ControllerNumber < DAC960_ControllerCount; ControllerNumber++) { DAC960_Controller_T *Controller = DAC960_Controllers[ControllerNumber]; if (Controller == NULL) continue; remove_proc_entry("initial_status", Controller->ControllerProcEntry); remove_proc_entry("current_status", Controller->ControllerProcEntry); remove_proc_entry("user_command", Controller->ControllerProcEntry); remove_proc_entry(Controller->ControllerName, DAC960_ProcDirectoryEntry); } remove_proc_entry("rd/status", NULL); remove_proc_entry("rd", NULL); } module_init(DAC960_Initialize); module_exit(DAC960_Finalize); MODULE_LICENSE("GPL");