URL
https://opencores.org/ocsvn/or1k/or1k/trunk
Subversion Repositories or1k
[/] [or1k/] [trunk/] [linux/] [linux-2.4/] [drivers/] [char/] [mips_rtc.c] - Rev 1275
Go to most recent revision | Compare with Previous | Blame | View Log
/* * A simple generic Real Time Clock interface for Linux/MIPS * * Copyright (C) 1996 Paul Gortmaker * * Copyright (C) 2001 Monta Vista Software * Author Jun Sun, jsun@mvista.com or jsun@junsun.net * * This is a simple generic RTC driver for MIPS boards configured * with CONFIG_NEW_TIME_C. For now, it makes use of the two * abstract kernel RTC functions introduced in include/asm-mips/time.h: * * extern unsigned long (*rtc_get_time)(void); * extern int (*rtc_set_time)(unsigned long); * * It uses the same protocol as the original drivers/char/rtc.c driver, * but only implements two ioctls: RTC_RD_TIME and RTC_SET_TIME. * * TODO : * * 1. we can extend the null rtc ops defined in arch/mips/time.c to * at least record the elapsed time (by recording/checking jiffies) * This way RTC_RD_TIME and RTC_SET_TIME will make more sense. * (Maybe not. A machine without a real RTC is broken anymore. * Just a thought.) * * 2. If we make use of timer bh, we can emulate many RTC functions * such as RTC alarm interrupt, periodic interrupts, etc. * * 3. It is possible to extend the kernel RTC abstractions to more * than two functions, so that perhaps we can implement more * full-featured RTC driver and also have a better abstraction * to support more RTC hardware than the original RTC driver. * It needs to be done very carefully. * * Change Log : * v1.0 - [jsun] initial version */ #define RTC_VERSION "1.0" #include <linux/config.h> #include <linux/module.h> #include <linux/kernel.h> #include <linux/types.h> #include <linux/miscdevice.h> #include <linux/fcntl.h> #include <linux/init.h> #include <linux/poll.h> #include <linux/proc_fs.h> #include <linux/spinlock.h> #include <asm/io.h> #include <asm/uaccess.h> #include <asm/system.h> /* * Check machine */ #if !defined(CONFIG_MIPS) || !defined(CONFIG_NEW_TIME_C) #error "This driver is for MIPS machines with CONFIG_NEW_TIME_C defined" #endif #include <asm/time.h> static unsigned long rtc_status = 0; /* bitmapped status byte. */ static int rtc_read_proc(char *page, char **start, off_t off, int count, int *eof, void *data); #define RTC_IS_OPEN 0x01 /* means /dev/rtc is in use */ static spinlock_t rtc_lock; static int rtc_ioctl(struct inode *inode, struct file *file, unsigned int cmd, unsigned long arg) { struct rtc_time rtc_tm; ulong curr_time; switch (cmd) { case RTC_RD_TIME: /* Read the time/date from RTC */ memset(&rtc_tm, 0, sizeof(struct rtc_time)); curr_time = rtc_get_time(); to_tm(curr_time, &rtc_tm); rtc_tm.tm_year -= 1900; return copy_to_user((void *) arg, &rtc_tm, sizeof(rtc_tm)) ? -EFAULT : 0; case RTC_SET_TIME: /* Set the RTC */ if (!capable(CAP_SYS_TIME)) return -EACCES; if (copy_from_user(&rtc_tm, (struct rtc_time *) arg, sizeof(struct rtc_time))) return -EFAULT; curr_time = mktime(rtc_tm.tm_year + 1900, rtc_tm.tm_mon + 1, /* tm_mon starts from 0 */ rtc_tm.tm_mday, rtc_tm.tm_hour, rtc_tm.tm_min, rtc_tm.tm_sec); return rtc_set_time(curr_time); default: return -EINVAL; } } /* We use rtc_lock to protect against concurrent opens. So the BKL is not * needed here. Or anywhere else in this driver. */ static int rtc_open(struct inode *inode, struct file *file) { spin_lock_irq(&rtc_lock); if (rtc_status & RTC_IS_OPEN) { spin_unlock_irq(&rtc_lock); return -EBUSY; } rtc_status |= RTC_IS_OPEN; spin_unlock_irq(&rtc_lock); return 0; } static int rtc_release(struct inode *inode, struct file *file) { spin_lock_irq(&rtc_lock); rtc_status &= ~RTC_IS_OPEN; spin_unlock_irq(&rtc_lock); return 0; } /* * The various file operations we support. */ static struct file_operations rtc_fops = { owner:THIS_MODULE, llseek:no_llseek, ioctl:rtc_ioctl, open:rtc_open, release:rtc_release, }; static struct miscdevice rtc_dev = { RTC_MINOR, "rtc", &rtc_fops }; static int __init rtc_init(void) { misc_register(&rtc_dev); create_proc_read_entry("driver/rtc", 0, 0, rtc_read_proc, NULL); printk(KERN_INFO "Generic MIPS RTC Driver v" RTC_VERSION "\n"); return 0; } static void __exit rtc_exit(void) { remove_proc_entry("driver/rtc", NULL); misc_deregister(&rtc_dev); } module_init(rtc_init); module_exit(rtc_exit); EXPORT_NO_SYMBOLS; /* * Info exported via "/proc/driver/rtc". */ static int rtc_proc_output(char *buf) { char *p; struct rtc_time tm; unsigned long curr_time; curr_time = rtc_get_time(); to_tm(curr_time, &tm); p = buf; /* * There is no way to tell if the luser has the RTC set for local * time or for Universal Standard Time (GMT). Probably local though. */ p += sprintf(p, "rtc_time\t: %02d:%02d:%02d\n" "rtc_date\t: %04d-%02d-%02d\n" "rtc_epoch\t: %04lu\n", tm.tm_hour, tm.tm_min, tm.tm_sec, tm.tm_year, tm.tm_mon + 1, tm.tm_mday, 0L); return p - buf; } static int rtc_read_proc(char *page, char **start, off_t off, int count, int *eof, void *data) { int len = rtc_proc_output(page); if (len <= off + count) *eof = 1; *start = page + off; len -= off; if (len > count) len = count; if (len < 0) len = 0; return len; } MODULE_AUTHOR("Jun Sun"); MODULE_LICENSE("GPL");
Go to most recent revision | Compare with Previous | Blame | View Log