URL
https://opencores.org/ocsvn/or1k/or1k/trunk
Subversion Repositories or1k
[/] [or1k/] [trunk/] [linux/] [linux-2.4/] [drivers/] [char/] [mxser.c] - Rev 1765
Compare with Previous | Blame | View Log
/*****************************************************************************/ /* * mxser.c -- MOXA Smartio family multiport serial driver. * * Copyright (C) 1999-2000 Moxa Technologies (support@moxa.com.tw). * * This code is loosely based on the Linux serial driver, written by * Linus Torvalds, Theodore T'so and others. * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by * the Free Software Foundation; either version 2 of the License, or * (at your option) any later version. * * This program is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * * You should have received a copy of the GNU General Public License * along with this program; if not, write to the Free Software * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. */ /* * MOXA Smartio Family Serial Driver * * Copyright (C) 1999,2000 Moxa Technologies Co., LTD. * * for : LINUX 2.0.X, 2.2.X, 2.4.X * date : 2001/05/01 * version : 1.2 * * Fixes for C104H/PCI by Tim Hockin <thockin@sun.com> * Added support for: C102, CI-132, CI-134, CP-132, CP-114, CT-114 cards * by Damian Wrobel <dwrobel@ertel.com.pl> * */ #include <linux/config.h> #include <linux/module.h> #include <linux/version.h> #include <linux/errno.h> #include <linux/signal.h> #include <linux/sched.h> #include <linux/timer.h> #include <linux/interrupt.h> #include <linux/tty.h> #include <linux/tty_flip.h> #include <linux/serial.h> #include <linux/serial_reg.h> #include <linux/major.h> #include <linux/string.h> #include <linux/fcntl.h> #include <linux/ptrace.h> #include <linux/ioport.h> #include <linux/mm.h> #include <linux/smp_lock.h> #include <linux/pci.h> #include <asm/system.h> #include <asm/io.h> #include <asm/irq.h> #include <asm/segment.h> #include <asm/bitops.h> #include <asm/uaccess.h> #define MXSER_VERSION "1.2.1" #define MXSERMAJOR 174 #define MXSERCUMAJOR 175 #define MXSER_EVENT_TXLOW 1 #define MXSER_EVENT_HANGUP 2 #define SERIAL_DO_RESTART #define MXSER_BOARDS 4 /* Max. boards */ #define MXSER_PORTS 32 /* Max. ports */ #define MXSER_PORTS_PER_BOARD 8 /* Max. ports per board */ #define MXSER_ISR_PASS_LIMIT 256 #define MXSER_ERR_IOADDR -1 #define MXSER_ERR_IRQ -2 #define MXSER_ERR_IRQ_CONFLIT -3 #define MXSER_ERR_VECTOR -4 #define SERIAL_TYPE_NORMAL 1 #define SERIAL_TYPE_CALLOUT 2 #define WAKEUP_CHARS 256 #define UART_MCR_AFE 0x20 #define UART_LSR_SPECIAL 0x1E #define PORTNO(x) (MINOR((x)->device) - (x)->driver.minor_start) #define RELEVANT_IFLAG(iflag) (iflag & (IGNBRK|BRKINT|IGNPAR|PARMRK|INPCK)) #define IRQ_T(info) ((info->flags & ASYNC_SHARE_IRQ) ? SA_SHIRQ : SA_INTERRUPT) #ifndef MIN #define MIN(a,b) ((a) < (b) ? (a) : (b)) #endif /* * Define the Moxa PCI vendor and device IDs. */ #ifndef PCI_VENDOR_ID_MOXA #define PCI_VENDOR_ID_MOXA 0x1393 #endif #ifndef PCI_DEVICE_ID_C168 #define PCI_DEVICE_ID_C168 0x1680 #endif #ifndef PCI_DEVICE_ID_C104 #define PCI_DEVICE_ID_C104 0x1040 #endif #ifndef PCI_DEVICE_ID_CP132 #define PCI_DEVICE_ID_CP132 0x1320 #endif #ifndef PCI_DEVICE_ID_CP114 #define PCI_DEVICE_ID_CP114 0x1141 #endif #ifndef PCI_DEVICE_ID_CT114 #define PCI_DEVICE_ID_CT114 0x1140 #endif #define C168_ASIC_ID 1 #define C104_ASIC_ID 2 #define CI134_ASIC_ID 3 #define CI132_ASIC_ID 4 #define CI104J_ASIC_ID 5 #define C102_ASIC_ID 0xB enum { MXSER_BOARD_C168_ISA = 0, MXSER_BOARD_C104_ISA, MXSER_BOARD_CI104J, MXSER_BOARD_C168_PCI, MXSER_BOARD_C104_PCI, MXSER_BOARD_C102_ISA, MXSER_BOARD_CI132, MXSER_BOARD_CI134, MXSER_BOARD_CP132_PCI, MXSER_BOARD_CP114_PCI, MXSER_BOARD_CT114_PCI }; static char *mxser_brdname[] = { "C168 series", "C104 series", "CI-104J series", "C168H/PCI series", "C104H/PCI series", "C102 series", "CI-132 series", "CI-134 series", "CP-132 series", "CP-114 series", "CT-114 series" }; static int mxser_numports[] = { 8, 4, 4, 8, 4, 2, 2, 4, 2, 4, 4 }; /* * MOXA ioctls */ #define MOXA 0x400 #define MOXA_GETDATACOUNT (MOXA + 23) #define MOXA_GET_CONF (MOXA + 35) #define MOXA_DIAGNOSE (MOXA + 50) #define MOXA_CHKPORTENABLE (MOXA + 60) #define MOXA_HighSpeedOn (MOXA + 61) #define MOXA_GET_MAJOR (MOXA + 63) #define MOXA_GET_CUMAJOR (MOXA + 64) #define MOXA_GETMSTATUS (MOXA + 65) static struct pci_device_id mxser_pcibrds[] = { { PCI_VENDOR_ID_MOXA, PCI_DEVICE_ID_C168, PCI_ANY_ID, PCI_ANY_ID, 0, 0, MXSER_BOARD_C168_PCI }, { PCI_VENDOR_ID_MOXA, PCI_DEVICE_ID_C104, PCI_ANY_ID, PCI_ANY_ID, 0, 0, MXSER_BOARD_C104_PCI }, { PCI_VENDOR_ID_MOXA, PCI_DEVICE_ID_CP132, PCI_ANY_ID, PCI_ANY_ID, 0, 0, MXSER_BOARD_CP132_PCI }, { PCI_VENDOR_ID_MOXA, PCI_DEVICE_ID_CP114, PCI_ANY_ID, PCI_ANY_ID, 0, 0, MXSER_BOARD_CP114_PCI }, { PCI_VENDOR_ID_MOXA, PCI_DEVICE_ID_CT114, PCI_ANY_ID, PCI_ANY_ID, 0, 0, MXSER_BOARD_CT114_PCI }, { 0 } }; MODULE_DEVICE_TABLE(pci, mxser_pcibrds); static int ioaddr[MXSER_BOARDS]; static int ttymajor = MXSERMAJOR; static int calloutmajor = MXSERCUMAJOR; static int verbose; /* Variables for insmod */ MODULE_AUTHOR("William Chen"); MODULE_DESCRIPTION("MOXA Smartio Family Multiport Board Device Driver"); MODULE_LICENSE("GPL"); MODULE_PARM(ioaddr, "1-4i"); MODULE_PARM(ttymajor, "i"); MODULE_PARM(calloutmajor, "i"); MODULE_PARM(verbose, "i"); EXPORT_NO_SYMBOLS; struct mxser_hwconf { int board_type; int ports; int irq; int vector; int vector_mask; int uart_type; int ioaddr[MXSER_PORTS_PER_BOARD]; int baud_base[MXSER_PORTS_PER_BOARD]; struct pci_dev *pdev; }; struct mxser_struct { int port; int base; /* port base address */ int irq; /* port using irq no. */ int vector; /* port irq vector */ int vectormask; /* port vector mask */ int rx_trigger; /* Rx fifo trigger level */ int baud_base; /* max. speed */ int flags; /* defined in tty.h */ int type; /* UART type */ struct tty_struct *tty; int read_status_mask; int ignore_status_mask; int xmit_fifo_size; int custom_divisor; int x_char; /* xon/xoff character */ int close_delay; unsigned short closing_wait; int IER; /* Interrupt Enable Register */ int MCR; /* Modem control register */ unsigned long event; int count; /* # of fd on device */ int blocked_open; /* # of blocked opens */ long session; /* Session of opening process */ long pgrp; /* pgrp of opening process */ unsigned char *xmit_buf; int xmit_head; int xmit_tail; int xmit_cnt; struct tq_struct tqueue; struct termios normal_termios; struct termios callout_termios; wait_queue_head_t open_wait; wait_queue_head_t close_wait; wait_queue_head_t delta_msr_wait; struct async_icount icount; /* kernel counters for the 4 input interrupts */ }; struct mxser_log { int tick; int rxcnt[MXSER_PORTS]; int txcnt[MXSER_PORTS]; }; struct mxser_mstatus { tcflag_t cflag; int cts; int dsr; int ri; int dcd; }; static struct mxser_mstatus GMStatus[MXSER_PORTS]; static int mxserBoardCAP[MXSER_BOARDS] = { 0, 0, 0, 0 /* 0x180, 0x280, 0x200, 0x320 */ }; static struct tty_driver mxvar_sdriver, mxvar_cdriver; static int mxvar_refcount; static struct mxser_struct mxvar_table[MXSER_PORTS]; static struct tty_struct *mxvar_tty[MXSER_PORTS + 1]; static struct termios *mxvar_termios[MXSER_PORTS + 1]; static struct termios *mxvar_termios_locked[MXSER_PORTS + 1]; static struct mxser_log mxvar_log; static int mxvar_diagflag; /* * mxvar_tmp_buf is used as a temporary buffer by serial_write. We need * to lock it in case the memcpy_fromfs blocks while swapping in a page, * and some other program tries to do a serial write at the same time. * Since the lock will only come under contention when the system is * swapping and available memory is low, it makes sense to share one * buffer across all the serial ports, since it significantly saves * memory if large numbers of serial ports are open. */ static unsigned char *mxvar_tmp_buf; static struct semaphore mxvar_tmp_buf_sem; /* * This is used to figure out the divisor speeds and the timeouts */ static int mxvar_baud_table[] = { 0, 50, 75, 110, 134, 150, 200, 300, 600, 1200, 1800, 2400, 4800, 9600, 19200, 38400, 57600, 115200, 230400, 460800, 921600, 0}; struct mxser_hwconf mxsercfg[MXSER_BOARDS]; /* * static functions: */ #ifdef MODULE int init_module(void); void cleanup_module(void); #endif static void mxser_getcfg(int board, struct mxser_hwconf *hwconf); int mxser_init(void); static int mxser_get_ISA_conf(int, struct mxser_hwconf *); static int mxser_get_PCI_conf(struct pci_dev *, int, struct mxser_hwconf *); static void mxser_do_softint(void *); static int mxser_open(struct tty_struct *, struct file *); static void mxser_close(struct tty_struct *, struct file *); static int mxser_write(struct tty_struct *, int, const unsigned char *, int); static int mxser_write_room(struct tty_struct *); static void mxser_flush_buffer(struct tty_struct *); static int mxser_chars_in_buffer(struct tty_struct *); static void mxser_flush_chars(struct tty_struct *); static void mxser_put_char(struct tty_struct *, unsigned char); static int mxser_ioctl(struct tty_struct *, struct file *, uint, ulong); static int mxser_ioctl_special(unsigned int, unsigned long); static void mxser_throttle(struct tty_struct *); static void mxser_unthrottle(struct tty_struct *); static void mxser_set_termios(struct tty_struct *, struct termios *); static void mxser_stop(struct tty_struct *); static void mxser_start(struct tty_struct *); static void mxser_hangup(struct tty_struct *); static void mxser_interrupt(int, void *, struct pt_regs *); static inline void mxser_receive_chars(struct mxser_struct *, int *); static inline void mxser_transmit_chars(struct mxser_struct *); static inline void mxser_check_modem_status(struct mxser_struct *, int); static int mxser_block_til_ready(struct tty_struct *, struct file *, struct mxser_struct *); static int mxser_startup(struct mxser_struct *); static void mxser_shutdown(struct mxser_struct *); static int mxser_change_speed(struct mxser_struct *, struct termios *old_termios); static int mxser_get_serial_info(struct mxser_struct *, struct serial_struct *); static int mxser_set_serial_info(struct mxser_struct *, struct serial_struct *); static int mxser_get_lsr_info(struct mxser_struct *, unsigned int *); static void mxser_send_break(struct mxser_struct *, int); static int mxser_get_modem_info(struct mxser_struct *, unsigned int *); static int mxser_set_modem_info(struct mxser_struct *, unsigned int, unsigned int *); /* * The MOXA C168/C104 serial driver boot-time initialization code! */ #ifdef MODULE int init_module(void) { int ret; if (verbose) printk("Loading module mxser ...\n"); ret = mxser_init(); if (verbose) printk("Done.\n"); return (ret); } void cleanup_module(void) { int i, err = 0; if (verbose) printk("Unloading module mxser ...\n"); if ((err |= tty_unregister_driver(&mxvar_cdriver))) printk("Couldn't unregister MOXA Smartio family callout driver\n"); if ((err |= tty_unregister_driver(&mxvar_sdriver))) printk("Couldn't unregister MOXA Smartio family serial driver\n"); for (i = 0; i < MXSER_BOARDS; i++) { if (mxsercfg[i].board_type == -1) continue; else { free_irq(mxsercfg[i].irq, &mxvar_table[i * MXSER_PORTS_PER_BOARD]); } } if (verbose) printk("Done.\n"); } #endif int mxser_initbrd(int board, struct mxser_hwconf *hwconf) { struct mxser_struct *info; unsigned long flags; int retval; int i, n; init_MUTEX(&mxvar_tmp_buf_sem); n = board * MXSER_PORTS_PER_BOARD; info = &mxvar_table[n]; for (i = 0; i < hwconf->ports; i++, n++, info++) { if (verbose) { printk(" ttyM%d/cum%d at 0x%04x ", n, n, hwconf->ioaddr[i]); if (hwconf->baud_base[i] == 115200) printk(" max. baud rate up to 115200 bps.\n"); else printk(" max. baud rate up to 921600 bps.\n"); } info->port = n; info->base = hwconf->ioaddr[i]; info->irq = hwconf->irq; info->vector = hwconf->vector; info->vectormask = hwconf->vector_mask; info->rx_trigger = 14; info->baud_base = hwconf->baud_base[i]; info->flags = ASYNC_SHARE_IRQ; info->type = hwconf->uart_type; if ((info->type == PORT_16450) || (info->type == PORT_8250)) info->xmit_fifo_size = 1; else info->xmit_fifo_size = 16; info->custom_divisor = hwconf->baud_base[i] * 16; info->close_delay = 5 * HZ / 10; info->closing_wait = 30 * HZ; info->tqueue.routine = mxser_do_softint; info->tqueue.data = info; info->callout_termios = mxvar_cdriver.init_termios; info->normal_termios = mxvar_sdriver.init_termios; init_waitqueue_head(&info->open_wait); init_waitqueue_head(&info->close_wait); init_waitqueue_head(&info->delta_msr_wait); } /* * Allocate the IRQ if necessary */ save_flags(flags); n = board * MXSER_PORTS_PER_BOARD; info = &mxvar_table[n]; cli(); retval = request_irq(hwconf->irq, mxser_interrupt, IRQ_T(info), "mxser", info); if (retval) { restore_flags(flags); printk("Board %d: %s", board, mxser_brdname[hwconf->board_type]); printk(" Request irq fail,IRQ (%d) may be conflit with another device.\n", info->irq); return (retval); } restore_flags(flags); return 0; } static void mxser_getcfg(int board, struct mxser_hwconf *hwconf) { mxsercfg[board] = *hwconf; } static int mxser_get_PCI_conf(struct pci_dev *pdev, int board_type, struct mxser_hwconf *hwconf) { int i; unsigned int ioaddress; hwconf->board_type = board_type; hwconf->ports = mxser_numports[board_type]; ioaddress = pci_resource_start (pdev, 2); for (i = 0; i < hwconf->ports; i++) hwconf->ioaddr[i] = ioaddress + 8 * i; ioaddress = pci_resource_start (pdev, 3); hwconf->vector = ioaddress; hwconf->irq = pdev->irq; hwconf->uart_type = PORT_16550A; hwconf->vector_mask = 0; for (i = 0; i < hwconf->ports; i++) { hwconf->vector_mask |= (1 << i); hwconf->baud_base[i] = 921600; } return (0); } int mxser_init(void) { int i, m, retval, b; int n, index; int ret1, ret2; struct mxser_hwconf hwconf; printk("MOXA Smartio family driver version %s\n", MXSER_VERSION); /* Initialize the tty_driver structure */ memset(&mxvar_sdriver, 0, sizeof(struct tty_driver)); mxvar_sdriver.magic = TTY_DRIVER_MAGIC; mxvar_sdriver.name = "ttyM"; mxvar_sdriver.major = ttymajor; mxvar_sdriver.minor_start = 0; mxvar_sdriver.num = MXSER_PORTS + 1; mxvar_sdriver.type = TTY_DRIVER_TYPE_SERIAL; mxvar_sdriver.subtype = SERIAL_TYPE_NORMAL; mxvar_sdriver.init_termios = tty_std_termios; mxvar_sdriver.init_termios.c_cflag = B9600 | CS8 | CREAD | HUPCL | CLOCAL; mxvar_sdriver.flags = TTY_DRIVER_REAL_RAW; mxvar_sdriver.refcount = &mxvar_refcount; mxvar_sdriver.table = mxvar_tty; mxvar_sdriver.termios = mxvar_termios; mxvar_sdriver.termios_locked = mxvar_termios_locked; mxvar_sdriver.open = mxser_open; mxvar_sdriver.close = mxser_close; mxvar_sdriver.write = mxser_write; mxvar_sdriver.put_char = mxser_put_char; mxvar_sdriver.flush_chars = mxser_flush_chars; mxvar_sdriver.write_room = mxser_write_room; mxvar_sdriver.chars_in_buffer = mxser_chars_in_buffer; mxvar_sdriver.flush_buffer = mxser_flush_buffer; mxvar_sdriver.ioctl = mxser_ioctl; mxvar_sdriver.throttle = mxser_throttle; mxvar_sdriver.unthrottle = mxser_unthrottle; mxvar_sdriver.set_termios = mxser_set_termios; mxvar_sdriver.stop = mxser_stop; mxvar_sdriver.start = mxser_start; mxvar_sdriver.hangup = mxser_hangup; /* * The callout device is just like normal device except for * major number and the subtype code. */ mxvar_cdriver = mxvar_sdriver; mxvar_cdriver.name = "cum"; mxvar_cdriver.major = calloutmajor; mxvar_cdriver.subtype = SERIAL_TYPE_CALLOUT; printk("Tty devices major number = %d, callout devices major number = %d\n", ttymajor, calloutmajor); mxvar_diagflag = 0; memset(mxvar_table, 0, MXSER_PORTS * sizeof(struct mxser_struct)); memset(&mxvar_log, 0, sizeof(struct mxser_log)); m = 0; /* Start finding ISA boards here */ for (b = 0; b < MXSER_BOARDS && m < MXSER_BOARDS; b++) { int cap; if (!(cap = mxserBoardCAP[b])) continue; retval = mxser_get_ISA_conf(cap, &hwconf); if (retval != 0) printk("Found MOXA %s board (CAP=0x%x)\n", mxser_brdname[hwconf.board_type], ioaddr[b]); if (retval <= 0) { if (retval == MXSER_ERR_IRQ) printk("Invalid interrupt number,board not configured\n"); else if (retval == MXSER_ERR_IRQ_CONFLIT) printk("Invalid interrupt number,board not configured\n"); else if (retval == MXSER_ERR_VECTOR) printk("Invalid interrupt vector,board not configured\n"); else if (retval == MXSER_ERR_IOADDR) printk("Invalid I/O address,board not configured\n"); continue; } hwconf.pdev = NULL; if (mxser_initbrd(m, &hwconf) < 0) continue; mxser_getcfg(m, &hwconf); m++; } /* Start finding ISA boards from module arg */ for (b = 0; b < MXSER_BOARDS && m < MXSER_BOARDS; b++) { int cap; if (!(cap = ioaddr[b])) continue; retval = mxser_get_ISA_conf(cap, &hwconf); if (retval != 0) printk("Found MOXA %s board (CAP=0x%x)\n", mxser_brdname[hwconf.board_type], ioaddr[b]); if (retval <= 0) { if (retval == MXSER_ERR_IRQ) printk("Invalid interrupt number,board not configured\n"); else if (retval == MXSER_ERR_IRQ_CONFLIT) printk("Invalid interrupt number,board not configured\n"); else if (retval == MXSER_ERR_VECTOR) printk("Invalid interrupt vector,board not configured\n"); else if (retval == MXSER_ERR_IOADDR) printk("Invalid I/O address,board not configured\n"); continue; } hwconf.pdev = NULL; if (mxser_initbrd(m, &hwconf) < 0) continue; mxser_getcfg(m, &hwconf); m++; } /* start finding PCI board here */ #ifdef CONFIG_PCI { struct pci_dev *pdev = NULL; n = (sizeof(mxser_pcibrds) / sizeof(mxser_pcibrds[0])) - 1; index = 0; for (b = 0; b < n; b++) { while ((pdev = pci_find_device(mxser_pcibrds[b].vendor, mxser_pcibrds[b].device, pdev)) != NULL) { if (pci_enable_device(pdev)) continue; hwconf.pdev = pdev; printk("Found MOXA %s board(BusNo=%d,DevNo=%d)\n", mxser_brdname[mxser_pcibrds[b].driver_data], pdev->bus->number, PCI_SLOT(pdev->devfn)); if (m >= MXSER_BOARDS) { printk("Too many Smartio family boards found (maximum %d),board not configured\n", MXSER_BOARDS); } else { retval = mxser_get_PCI_conf(pdev, mxser_pcibrds[b].driver_data, &hwconf); if (retval < 0) { if (retval == MXSER_ERR_IRQ) printk("Invalid interrupt number,board not configured\n"); else if (retval == MXSER_ERR_IRQ_CONFLIT) printk("Invalid interrupt number,board not configured\n"); else if (retval == MXSER_ERR_VECTOR) printk("Invalid interrupt vector,board not configured\n"); else if (retval == MXSER_ERR_IOADDR) printk("Invalid I/O address,board not configured\n"); continue; } if (mxser_initbrd(m, &hwconf) < 0) continue; mxser_getcfg(m, &hwconf); m++; } } } } #endif for (i = m; i < MXSER_BOARDS; i++) { mxsercfg[i].board_type = -1; } ret1 = 0; ret2 = 0; if (!(ret1 = tty_register_driver(&mxvar_sdriver))) { if (!(ret2 = tty_register_driver(&mxvar_cdriver))) { return 0; } else { tty_unregister_driver(&mxvar_sdriver); printk("Couldn't install MOXA Smartio family callout driver !\n"); } } else printk("Couldn't install MOXA Smartio family driver !\n"); if (ret1 || ret2) { for (i = 0; i < MXSER_BOARDS; i++) { if (mxsercfg[i].board_type == -1) continue; else { free_irq(mxsercfg[i].irq, &mxvar_table[i * MXSER_PORTS_PER_BOARD]); } } return -1; } return (0); } static void mxser_do_softint(void *private_) { struct mxser_struct *info = (struct mxser_struct *) private_; struct tty_struct *tty; tty = info->tty; if (tty) { if (test_and_clear_bit(MXSER_EVENT_TXLOW, &info->event)) { if ((tty->flags & (1 << TTY_DO_WRITE_WAKEUP)) && tty->ldisc.write_wakeup) (tty->ldisc.write_wakeup) (tty); wake_up_interruptible(&tty->write_wait); } if (test_and_clear_bit(MXSER_EVENT_HANGUP, &info->event)) { tty_hangup(tty); /* FIXME: module removal race here - AKPM */ } } MOD_DEC_USE_COUNT; } /* * This routine is called whenever a serial port is opened. It * enables interrupts for a serial port, linking in its async structure into * the IRQ chain. It also performs the serial-specific * initialization for the tty structure. */ static int mxser_open(struct tty_struct *tty, struct file *filp) { struct mxser_struct *info; int retval, line; unsigned long page; line = PORTNO(tty); if (line == MXSER_PORTS) return (0); if ((line < 0) || (line > MXSER_PORTS)) return (-ENODEV); info = mxvar_table + line; if (!info->base) return (-ENODEV); info->count++; tty->driver_data = info; info->tty = tty; if (!mxvar_tmp_buf) { page = get_free_page(GFP_KERNEL); if (!page) return (-ENOMEM); if (mxvar_tmp_buf) free_page(page); else mxvar_tmp_buf = (unsigned char *) page; } /* * Start up serial port */ retval = mxser_startup(info); if (retval) return (retval); retval = mxser_block_til_ready(tty, filp, info); if (retval) return (retval); if ((info->count == 1) && (info->flags & ASYNC_SPLIT_TERMIOS)) { if (tty->driver.subtype == SERIAL_TYPE_NORMAL) *tty->termios = info->normal_termios; else *tty->termios = info->callout_termios; mxser_change_speed(info, 0); } info->session = current->session; info->pgrp = current->pgrp; MOD_INC_USE_COUNT; return (0); } /* * This routine is called when the serial port gets closed. First, we * wait for the last remaining data to be sent. Then, we unlink its * async structure from the interrupt chain if necessary, and we free * that IRQ if nothing is left in the chain. */ static void mxser_close(struct tty_struct *tty, struct file *filp) { struct mxser_struct *info = (struct mxser_struct *) tty->driver_data; unsigned long flags; unsigned long timeout; if (PORTNO(tty) == MXSER_PORTS) return; if (!info) return; save_flags(flags); cli(); if (tty_hung_up_p(filp)) { restore_flags(flags); MOD_DEC_USE_COUNT; return; } if ((tty->count == 1) && (info->count != 1)) { /* * Uh, oh. tty->count is 1, which means that the tty * structure will be freed. Info->count should always * be one in these conditions. If it's greater than * one, we've got real problems, since it means the * serial port won't be shutdown. */ printk("mxser_close: bad serial port count; tty->count is 1, " "info->count is %d\n", info->count); info->count = 1; } if (--info->count < 0) { printk("mxser_close: bad serial port count for ttys%d: %d\n", info->port, info->count); info->count = 0; } if (info->count) { restore_flags(flags); MOD_DEC_USE_COUNT; return; } info->flags |= ASYNC_CLOSING; /* * Save the termios structure, since this port may have * separate termios for callout and dialin. */ if (info->flags & ASYNC_NORMAL_ACTIVE) info->normal_termios = *tty->termios; if (info->flags & ASYNC_CALLOUT_ACTIVE) info->callout_termios = *tty->termios; /* * Now we wait for the transmit buffer to clear; and we notify * the line discipline to only process XON/XOFF characters. */ tty->closing = 1; if (info->closing_wait != ASYNC_CLOSING_WAIT_NONE) tty_wait_until_sent(tty, info->closing_wait); /* * At this point we stop accepting input. To do this, we * disable the receive line status interrupts, and tell the * interrupt driver to stop checking the data ready bit in the * line status register. */ info->IER &= ~UART_IER_RLSI; /* by William info->read_status_mask &= ~UART_LSR_DR; */ if (info->flags & ASYNC_INITIALIZED) { outb(info->IER, info->base + UART_IER); /* * Before we drop DTR, make sure the UART transmitter * has completely drained; this is especially * important if there is a transmit FIFO! */ timeout = jiffies + HZ; while (!(inb(info->base + UART_LSR) & UART_LSR_TEMT)) { set_current_state(TASK_INTERRUPTIBLE); schedule_timeout(5); if (jiffies > timeout) break; } } mxser_shutdown(info); if (tty->driver.flush_buffer) tty->driver.flush_buffer(tty); if (tty->ldisc.flush_buffer) tty->ldisc.flush_buffer(tty); tty->closing = 0; info->event = 0; info->tty = 0; if (info->blocked_open) { if (info->close_delay) { set_current_state(TASK_INTERRUPTIBLE); schedule_timeout(info->close_delay); } wake_up_interruptible(&info->open_wait); } info->flags &= ~(ASYNC_NORMAL_ACTIVE | ASYNC_CALLOUT_ACTIVE | ASYNC_CLOSING); wake_up_interruptible(&info->close_wait); restore_flags(flags); MOD_DEC_USE_COUNT; } static int mxser_write(struct tty_struct *tty, int from_user, const unsigned char *buf, int count) { int c, total = 0; struct mxser_struct *info = (struct mxser_struct *) tty->driver_data; unsigned long flags; if (!tty || !info->xmit_buf || !mxvar_tmp_buf) return (0); save_flags(flags); if (from_user) { down(&mxvar_tmp_buf_sem); while (1) { c = MIN(count, MIN(SERIAL_XMIT_SIZE - info->xmit_cnt - 1, SERIAL_XMIT_SIZE - info->xmit_head)); if (c <= 0) break; c -= copy_from_user(mxvar_tmp_buf, buf, c); if (!c) { if (!total) total = -EFAULT; break; } cli(); c = MIN(c, MIN(SERIAL_XMIT_SIZE - info->xmit_cnt - 1, SERIAL_XMIT_SIZE - info->xmit_head)); memcpy(info->xmit_buf + info->xmit_head, mxvar_tmp_buf, c); info->xmit_head = (info->xmit_head + c) & (SERIAL_XMIT_SIZE - 1); info->xmit_cnt += c; restore_flags(flags); buf += c; count -= c; total += c; } up(&mxvar_tmp_buf_sem); } else { while (1) { cli(); c = MIN(count, MIN(SERIAL_XMIT_SIZE - info->xmit_cnt - 1, SERIAL_XMIT_SIZE - info->xmit_head)); if (c <= 0) { restore_flags(flags); break; } memcpy(info->xmit_buf + info->xmit_head, buf, c); info->xmit_head = (info->xmit_head + c) & (SERIAL_XMIT_SIZE - 1); info->xmit_cnt += c; restore_flags(flags); buf += c; count -= c; total += c; } } cli(); if (info->xmit_cnt && !tty->stopped && !tty->hw_stopped && !(info->IER & UART_IER_THRI)) { info->IER |= UART_IER_THRI; outb(info->IER, info->base + UART_IER); } restore_flags(flags); return (total); } static void mxser_put_char(struct tty_struct *tty, unsigned char ch) { struct mxser_struct *info = (struct mxser_struct *) tty->driver_data; unsigned long flags; if (!tty || !info->xmit_buf) return; save_flags(flags); cli(); if (info->xmit_cnt >= SERIAL_XMIT_SIZE - 1) { restore_flags(flags); return; } info->xmit_buf[info->xmit_head++] = ch; info->xmit_head &= SERIAL_XMIT_SIZE - 1; info->xmit_cnt++; /********************************************** why ??? *********** if ( !tty->stopped && !tty->hw_stopped && !(info->IER & UART_IER_THRI) ) { info->IER |= UART_IER_THRI; outb(info->IER, info->base + UART_IER); } *****************************************************************/ restore_flags(flags); } static void mxser_flush_chars(struct tty_struct *tty) { struct mxser_struct *info = (struct mxser_struct *) tty->driver_data; unsigned long flags; if (info->xmit_cnt <= 0 || tty->stopped || tty->hw_stopped || !info->xmit_buf) return; save_flags(flags); cli(); info->IER |= UART_IER_THRI; outb(info->IER, info->base + UART_IER); restore_flags(flags); } static int mxser_write_room(struct tty_struct *tty) { struct mxser_struct *info = (struct mxser_struct *) tty->driver_data; int ret; ret = SERIAL_XMIT_SIZE - info->xmit_cnt - 1; if (ret < 0) ret = 0; return (ret); } static int mxser_chars_in_buffer(struct tty_struct *tty) { struct mxser_struct *info = (struct mxser_struct *) tty->driver_data; return (info->xmit_cnt); } static void mxser_flush_buffer(struct tty_struct *tty) { struct mxser_struct *info = (struct mxser_struct *) tty->driver_data; unsigned long flags; save_flags(flags); cli(); info->xmit_cnt = info->xmit_head = info->xmit_tail = 0; restore_flags(flags); wake_up_interruptible(&tty->write_wait); if ((tty->flags & (1 << TTY_DO_WRITE_WAKEUP)) && tty->ldisc.write_wakeup) (tty->ldisc.write_wakeup) (tty); } static int mxser_ioctl(struct tty_struct *tty, struct file *file, unsigned int cmd, unsigned long arg) { unsigned long flags; struct mxser_struct *info = (struct mxser_struct *) tty->driver_data; int retval; struct async_icount cprev, cnow; /* kernel counter temps */ struct serial_icounter_struct *p_cuser; /* user space */ unsigned long templ; if (PORTNO(tty) == MXSER_PORTS) return (mxser_ioctl_special(cmd, arg)); if ((cmd != TIOCGSERIAL) && (cmd != TIOCMIWAIT) && (cmd != TIOCGICOUNT)) { if (tty->flags & (1 << TTY_IO_ERROR)) return (-EIO); } switch (cmd) { case TCSBRK: /* SVID version: non-zero arg --> no break */ retval = tty_check_change(tty); if (retval) return (retval); tty_wait_until_sent(tty, 0); if (!arg) mxser_send_break(info, HZ / 4); /* 1/4 second */ return (0); case TCSBRKP: /* support for POSIX tcsendbreak() */ retval = tty_check_change(tty); if (retval) return (retval); tty_wait_until_sent(tty, 0); mxser_send_break(info, arg ? arg * (HZ / 10) : HZ / 4); return (0); case TIOCGSOFTCAR: return put_user(C_CLOCAL(tty) ? 1 : 0, (unsigned long *) arg); case TIOCSSOFTCAR: if(get_user(templ, (unsigned long *) arg)) return -EFAULT; arg = templ; tty->termios->c_cflag = ((tty->termios->c_cflag & ~CLOCAL) | (arg ? CLOCAL : 0)); return (0); case TIOCMGET: return (mxser_get_modem_info(info, (unsigned int *) arg)); case TIOCMBIS: case TIOCMBIC: case TIOCMSET: return (mxser_set_modem_info(info, cmd, (unsigned int *) arg)); case TIOCGSERIAL: return (mxser_get_serial_info(info, (struct serial_struct *) arg)); case TIOCSSERIAL: return (mxser_set_serial_info(info, (struct serial_struct *) arg)); case TIOCSERGETLSR: /* Get line status register */ return (mxser_get_lsr_info(info, (unsigned int *) arg)); /* * Wait for any of the 4 modem inputs (DCD,RI,DSR,CTS) to change * - mask passed in arg for lines of interest * (use |'ed TIOCM_RNG/DSR/CD/CTS for masking) * Caller should use TIOCGICOUNT to see which one it was */ case TIOCMIWAIT: save_flags(flags); cli(); cprev = info->icount; /* note the counters on entry */ restore_flags(flags); while (1) { interruptible_sleep_on(&info->delta_msr_wait); /* see if a signal did it */ if (signal_pending(current)) return (-ERESTARTSYS); save_flags(flags); cli(); cnow = info->icount; /* atomic copy */ restore_flags(flags); if (cnow.rng == cprev.rng && cnow.dsr == cprev.dsr && cnow.dcd == cprev.dcd && cnow.cts == cprev.cts) return (-EIO); /* no change => error */ if (((arg & TIOCM_RNG) && (cnow.rng != cprev.rng)) || ((arg & TIOCM_DSR) && (cnow.dsr != cprev.dsr)) || ((arg & TIOCM_CD) && (cnow.dcd != cprev.dcd)) || ((arg & TIOCM_CTS) && (cnow.cts != cprev.cts))) { return (0); } cprev = cnow; } /* NOTREACHED */ /* * Get counter of input serial line interrupts (DCD,RI,DSR,CTS) * Return: write counters to the user passed counter struct * NB: both 1->0 and 0->1 transitions are counted except for * RI where only 0->1 is counted. */ case TIOCGICOUNT: save_flags(flags); cli(); cnow = info->icount; restore_flags(flags); p_cuser = (struct serial_icounter_struct *) arg; if(put_user(cnow.cts, &p_cuser->cts)) return -EFAULT; if(put_user(cnow.dsr, &p_cuser->dsr)) return -EFAULT; if(put_user(cnow.rng, &p_cuser->rng)) return -EFAULT; return put_user(cnow.dcd, &p_cuser->dcd); case MOXA_HighSpeedOn: return put_user(info->baud_base != 115200 ? 1 : 0, (int *) arg); default: return (-ENOIOCTLCMD); } return (0); } static int mxser_ioctl_special(unsigned int cmd, unsigned long arg) { int i, result, status; switch (cmd) { case MOXA_GET_CONF: if(copy_to_user((struct mxser_hwconf *) arg, mxsercfg, sizeof(struct mxser_hwconf) * 4)) return -EFAULT; return 0; case MOXA_GET_MAJOR: if(copy_to_user((int *) arg, &ttymajor, sizeof(int))) return -EFAULT; return 0; case MOXA_GET_CUMAJOR: if(copy_to_user((int *) arg, &calloutmajor, sizeof(int))) return -EFAULT; return 0; case MOXA_CHKPORTENABLE: result = 0; for (i = 0; i < MXSER_PORTS; i++) { if (mxvar_table[i].base) result |= (1 << i); } return put_user(result, (unsigned long *) arg); case MOXA_GETDATACOUNT: if(copy_to_user((struct mxser_log *) arg, &mxvar_log, sizeof(mxvar_log))) return -EFAULT; return (0); case MOXA_GETMSTATUS: for (i = 0; i < MXSER_PORTS; i++) { GMStatus[i].ri = 0; if (!mxvar_table[i].base) { GMStatus[i].dcd = 0; GMStatus[i].dsr = 0; GMStatus[i].cts = 0; continue; } if (!mxvar_table[i].tty || !mxvar_table[i].tty->termios) GMStatus[i].cflag = mxvar_table[i].normal_termios.c_cflag; else GMStatus[i].cflag = mxvar_table[i].tty->termios->c_cflag; status = inb(mxvar_table[i].base + UART_MSR); if (status & 0x80 /*UART_MSR_DCD */ ) GMStatus[i].dcd = 1; else GMStatus[i].dcd = 0; if (status & 0x20 /*UART_MSR_DSR */ ) GMStatus[i].dsr = 1; else GMStatus[i].dsr = 0; if (status & 0x10 /*UART_MSR_CTS */ ) GMStatus[i].cts = 1; else GMStatus[i].cts = 0; } if(copy_to_user((struct mxser_mstatus *) arg, GMStatus, sizeof(struct mxser_mstatus) * MXSER_PORTS)) return -EFAULT; return 0; default: return (-ENOIOCTLCMD); } return (0); } /* * This routine is called by the upper-layer tty layer to signal that * incoming characters should be throttled. */ static void mxser_throttle(struct tty_struct *tty) { struct mxser_struct *info = (struct mxser_struct *) tty->driver_data; unsigned long flags; if (I_IXOFF(tty)) { info->x_char = STOP_CHAR(tty); save_flags(flags); cli(); outb(info->IER, 0); info->IER |= UART_IER_THRI; outb(info->IER, info->base + UART_IER); /* force Tx interrupt */ restore_flags(flags); } if (info->tty->termios->c_cflag & CRTSCTS) { info->MCR &= ~UART_MCR_RTS; save_flags(flags); cli(); outb(info->MCR, info->base + UART_MCR); restore_flags(flags); } } static void mxser_unthrottle(struct tty_struct *tty) { struct mxser_struct *info = (struct mxser_struct *) tty->driver_data; unsigned long flags; if (I_IXOFF(tty)) { if (info->x_char) info->x_char = 0; else { info->x_char = START_CHAR(tty); save_flags(flags); cli(); outb(info->IER, 0); info->IER |= UART_IER_THRI; /* force Tx interrupt */ outb(info->IER, info->base + UART_IER); restore_flags(flags); } } if (info->tty->termios->c_cflag & CRTSCTS) { info->MCR |= UART_MCR_RTS; save_flags(flags); cli(); outb(info->MCR, info->base + UART_MCR); restore_flags(flags); } } static void mxser_set_termios(struct tty_struct *tty, struct termios *old_termios) { struct mxser_struct *info = (struct mxser_struct *) tty->driver_data; /* 8-2-99 by William if ( (tty->termios->c_cflag == old_termios->c_cflag) && (RELEVANT_IFLAG(tty->termios->c_iflag) == RELEVANT_IFLAG(old_termios->c_iflag)) ) return; mxser_change_speed(info, old_termios); if ( (old_termios->c_cflag & CRTSCTS) && !(tty->termios->c_cflag & CRTSCTS) ) { tty->hw_stopped = 0; mxser_start(tty); } */ if ((tty->termios->c_cflag != old_termios->c_cflag) || (RELEVANT_IFLAG(tty->termios->c_iflag) != RELEVANT_IFLAG(old_termios->c_iflag))) { mxser_change_speed(info, old_termios); if ((old_termios->c_cflag & CRTSCTS) && !(tty->termios->c_cflag & CRTSCTS)) { tty->hw_stopped = 0; mxser_start(tty); } } /* Handle sw stopped */ if ((old_termios->c_iflag & IXON) && !(tty->termios->c_iflag & IXON)) { tty->stopped = 0; mxser_start(tty); } } /* * mxser_stop() and mxser_start() * * This routines are called before setting or resetting tty->stopped. * They enable or disable transmitter interrupts, as necessary. */ static void mxser_stop(struct tty_struct *tty) { struct mxser_struct *info = (struct mxser_struct *) tty->driver_data; unsigned long flags; save_flags(flags); cli(); if (info->IER & UART_IER_THRI) { info->IER &= ~UART_IER_THRI; outb(info->IER, info->base + UART_IER); } restore_flags(flags); } static void mxser_start(struct tty_struct *tty) { struct mxser_struct *info = (struct mxser_struct *) tty->driver_data; unsigned long flags; save_flags(flags); cli(); if (info->xmit_cnt && info->xmit_buf && !(info->IER & UART_IER_THRI)) { info->IER |= UART_IER_THRI; outb(info->IER, info->base + UART_IER); } restore_flags(flags); } /* * This routine is called by tty_hangup() when a hangup is signaled. */ void mxser_hangup(struct tty_struct *tty) { struct mxser_struct *info = (struct mxser_struct *) tty->driver_data; mxser_flush_buffer(tty); mxser_shutdown(info); info->event = 0; info->count = 0; info->flags &= ~(ASYNC_NORMAL_ACTIVE | ASYNC_CALLOUT_ACTIVE); info->tty = 0; wake_up_interruptible(&info->open_wait); } /* * This is the serial driver's generic interrupt routine */ static void mxser_interrupt(int irq, void *dev_id, struct pt_regs *regs) { int status, i; struct mxser_struct *info; struct mxser_struct *port; int max, irqbits, bits, msr; int pass_counter = 0; port = 0; for (i = 0; i < MXSER_BOARDS; i++) { if (dev_id == &(mxvar_table[i * MXSER_PORTS_PER_BOARD])) { port = dev_id; break; } } if (i == MXSER_BOARDS) return; if (port == 0) return; max = mxser_numports[mxsercfg[i].board_type]; while (1) { irqbits = inb(port->vector) & port->vectormask; if (irqbits == port->vectormask) break; for (i = 0, bits = 1; i < max; i++, irqbits |= bits, bits <<= 1) { if (irqbits == port->vectormask) break; if (bits & irqbits) continue; info = port + i; if (!info->tty || (inb(info->base + UART_IIR) & UART_IIR_NO_INT)) continue; status = inb(info->base + UART_LSR) & info->read_status_mask; if (status & UART_LSR_DR) mxser_receive_chars(info, &status); msr = inb(info->base + UART_MSR); if (msr & UART_MSR_ANY_DELTA) mxser_check_modem_status(info, msr); if (status & UART_LSR_THRE) { /* 8-2-99 by William if ( info->x_char || (info->xmit_cnt > 0) ) */ mxser_transmit_chars(info); } } if (pass_counter++ > MXSER_ISR_PASS_LIMIT) { #if 0 printk("MOXA Smartio/Indusrtio family driver interrupt loop break\n"); #endif break; /* Prevent infinite loops */ } } } static inline void mxser_receive_chars(struct mxser_struct *info, int *status) { struct tty_struct *tty = info->tty; unsigned char ch; int ignored = 0; int cnt = 0; do { ch = inb(info->base + UART_RX); if (*status & info->ignore_status_mask) { if (++ignored > 100) break; } else { if (tty->flip.count >= TTY_FLIPBUF_SIZE) break; tty->flip.count++; if (*status & UART_LSR_SPECIAL) { if (*status & UART_LSR_BI) { *tty->flip.flag_buf_ptr++ = TTY_BREAK; if (info->flags & ASYNC_SAK) do_SAK(tty); } else if (*status & UART_LSR_PE) { *tty->flip.flag_buf_ptr++ = TTY_PARITY; } else if (*status & UART_LSR_FE) { *tty->flip.flag_buf_ptr++ = TTY_FRAME; } else if (*status & UART_LSR_OE) { *tty->flip.flag_buf_ptr++ = TTY_OVERRUN; } else *tty->flip.flag_buf_ptr++ = 0; } else *tty->flip.flag_buf_ptr++ = 0; *tty->flip.char_buf_ptr++ = ch; cnt++; } *status = inb(info->base + UART_LSR) & info->read_status_mask; } while (*status & UART_LSR_DR); mxvar_log.rxcnt[info->port] += cnt; queue_task(&tty->flip.tqueue, &tq_timer); } static inline void mxser_transmit_chars(struct mxser_struct *info) { int count, cnt; if (info->x_char) { outb(info->x_char, info->base + UART_TX); info->x_char = 0; mxvar_log.txcnt[info->port]++; return; } if ((info->xmit_cnt <= 0) || info->tty->stopped || info->tty->hw_stopped) { info->IER &= ~UART_IER_THRI; outb(info->IER, info->base + UART_IER); return; } cnt = info->xmit_cnt; count = info->xmit_fifo_size; do { outb(info->xmit_buf[info->xmit_tail++], info->base + UART_TX); info->xmit_tail = info->xmit_tail & (SERIAL_XMIT_SIZE - 1); if (--info->xmit_cnt <= 0) break; } while (--count > 0); mxvar_log.txcnt[info->port] += (cnt - info->xmit_cnt); if (info->xmit_cnt < WAKEUP_CHARS) { set_bit(MXSER_EVENT_TXLOW, &info->event); MOD_INC_USE_COUNT; if (schedule_task(&info->tqueue) == 0) MOD_DEC_USE_COUNT; } if (info->xmit_cnt <= 0) { info->IER &= ~UART_IER_THRI; outb(info->IER, info->base + UART_IER); } } static inline void mxser_check_modem_status(struct mxser_struct *info, int status) { /* update input line counters */ if (status & UART_MSR_TERI) info->icount.rng++; if (status & UART_MSR_DDSR) info->icount.dsr++; if (status & UART_MSR_DDCD) info->icount.dcd++; if (status & UART_MSR_DCTS) info->icount.cts++; wake_up_interruptible(&info->delta_msr_wait); if ((info->flags & ASYNC_CHECK_CD) && (status & UART_MSR_DDCD)) { if (status & UART_MSR_DCD) wake_up_interruptible(&info->open_wait); else if (!((info->flags & ASYNC_CALLOUT_ACTIVE) && (info->flags & ASYNC_CALLOUT_NOHUP))) set_bit(MXSER_EVENT_HANGUP, &info->event); MOD_INC_USE_COUNT; if (schedule_task(&info->tqueue) == 0) MOD_DEC_USE_COUNT; } if (info->flags & ASYNC_CTS_FLOW) { if (info->tty->hw_stopped) { if (status & UART_MSR_CTS) { info->tty->hw_stopped = 0; info->IER |= UART_IER_THRI; outb(info->IER, info->base + UART_IER); set_bit(MXSER_EVENT_TXLOW, &info->event); MOD_INC_USE_COUNT; if (schedule_task(&info->tqueue) == 0) MOD_DEC_USE_COUNT; } } else { if (!(status & UART_MSR_CTS)) { info->tty->hw_stopped = 1; info->IER &= ~UART_IER_THRI; outb(info->IER, info->base + UART_IER); } } } } static int mxser_block_til_ready(struct tty_struct *tty, struct file *filp, struct mxser_struct *info) { DECLARE_WAITQUEUE(wait, current); unsigned long flags; int retval; int do_clocal = 0; /* * If the device is in the middle of being closed, then block * until it's done, and then try again. */ if (tty_hung_up_p(filp) || (info->flags & ASYNC_CLOSING)) { if (info->flags & ASYNC_CLOSING) interruptible_sleep_on(&info->close_wait); #ifdef SERIAL_DO_RESTART if (info->flags & ASYNC_HUP_NOTIFY) return (-EAGAIN); else return (-ERESTARTSYS); #else return (-EAGAIN); #endif } /* * If this is a callout device, then just make sure the normal * device isn't being used. */ if (tty->driver.subtype == SERIAL_TYPE_CALLOUT) { if (info->flags & ASYNC_NORMAL_ACTIVE) return (-EBUSY); if ((info->flags & ASYNC_CALLOUT_ACTIVE) && (info->flags & ASYNC_SESSION_LOCKOUT) && (info->session != current->session)) return (-EBUSY); if ((info->flags & ASYNC_CALLOUT_ACTIVE) && (info->flags & ASYNC_PGRP_LOCKOUT) && (info->pgrp != current->pgrp)) return (-EBUSY); info->flags |= ASYNC_CALLOUT_ACTIVE; return (0); } /* * If non-blocking mode is set, or the port is not enabled, * then make the check up front and then exit. */ if ((filp->f_flags & O_NONBLOCK) || (tty->flags & (1 << TTY_IO_ERROR))) { if (info->flags & ASYNC_CALLOUT_ACTIVE) return (-EBUSY); info->flags |= ASYNC_NORMAL_ACTIVE; return (0); } if (info->flags & ASYNC_CALLOUT_ACTIVE) { if (info->normal_termios.c_cflag & CLOCAL) do_clocal = 1; } else { if (tty->termios->c_cflag & CLOCAL) do_clocal = 1; } /* * Block waiting for the carrier detect and the line to become * free (i.e., not in use by the callout). While we are in * this loop, info->count is dropped by one, so that * mxser_close() knows when to free things. We restore it upon * exit, either normal or abnormal. */ retval = 0; add_wait_queue(&info->open_wait, &wait); save_flags(flags); cli(); if (!tty_hung_up_p(filp)) info->count--; restore_flags(flags); info->blocked_open++; while (1) { save_flags(flags); cli(); if (!(info->flags & ASYNC_CALLOUT_ACTIVE)) outb(inb(info->base + UART_MCR) | UART_MCR_DTR | UART_MCR_RTS, info->base + UART_MCR); restore_flags(flags); set_current_state(TASK_INTERRUPTIBLE); if (tty_hung_up_p(filp) || !(info->flags & ASYNC_INITIALIZED)) { #ifdef SERIAL_DO_RESTART if (info->flags & ASYNC_HUP_NOTIFY) retval = -EAGAIN; else retval = -ERESTARTSYS; #else retval = -EAGAIN; #endif break; } if (!(info->flags & ASYNC_CALLOUT_ACTIVE) && !(info->flags & ASYNC_CLOSING) && (do_clocal || (inb(info->base + UART_MSR) & UART_MSR_DCD))) break; if (signal_pending(current)) { retval = -ERESTARTSYS; break; } schedule(); } set_current_state(TASK_RUNNING); remove_wait_queue(&info->open_wait, &wait); if (!tty_hung_up_p(filp)) info->count++; info->blocked_open--; if (retval) return (retval); info->flags |= ASYNC_NORMAL_ACTIVE; return (0); } static int mxser_startup(struct mxser_struct *info) { unsigned long flags; unsigned long page; page = get_free_page(GFP_KERNEL); if (!page) return (-ENOMEM); save_flags(flags); cli(); if (info->flags & ASYNC_INITIALIZED) { free_page(page); restore_flags(flags); return (0); } if (!info->base || !info->type) { if (info->tty) set_bit(TTY_IO_ERROR, &info->tty->flags); free_page(page); restore_flags(flags); return (0); } if (info->xmit_buf) free_page(page); else info->xmit_buf = (unsigned char *) page; /* * Clear the FIFO buffers and disable them * (they will be reenabled in mxser_change_speed()) */ if (info->xmit_fifo_size == 16) outb((UART_FCR_CLEAR_RCVR | UART_FCR_CLEAR_XMIT), info->base + UART_FCR); /* * At this point there's no way the LSR could still be 0xFF; * if it is, then bail out, because there's likely no UART * here. */ if (inb(info->base + UART_LSR) == 0xff) { restore_flags(flags); if (capable(CAP_SYS_ADMIN)) { if (info->tty) set_bit(TTY_IO_ERROR, &info->tty->flags); return (0); } else return (-ENODEV); } /* * Clear the interrupt registers. */ (void) inb(info->base + UART_LSR); (void) inb(info->base + UART_RX); (void) inb(info->base + UART_IIR); (void) inb(info->base + UART_MSR); /* * Now, initialize the UART */ outb(UART_LCR_WLEN8, info->base + UART_LCR); /* reset DLAB */ info->MCR = UART_MCR_DTR | UART_MCR_RTS; outb(info->MCR, info->base + UART_MCR); /* * Finally, enable interrupts */ info->IER = UART_IER_MSI | UART_IER_RLSI | UART_IER_RDI; outb(info->IER, info->base + UART_IER); /* enable interrupts */ /* * And clear the interrupt registers again for luck. */ (void) inb(info->base + UART_LSR); (void) inb(info->base + UART_RX); (void) inb(info->base + UART_IIR); (void) inb(info->base + UART_MSR); if (info->tty) test_and_clear_bit(TTY_IO_ERROR, &info->tty->flags); info->xmit_cnt = info->xmit_head = info->xmit_tail = 0; /* * and set the speed of the serial port */ mxser_change_speed(info, 0); info->flags |= ASYNC_INITIALIZED; restore_flags(flags); return (0); } /* * This routine will shutdown a serial port; interrupts maybe disabled, and * DTR is dropped if the hangup on close termio flag is on. */ static void mxser_shutdown(struct mxser_struct *info) { unsigned long flags; if (!(info->flags & ASYNC_INITIALIZED)) return; save_flags(flags); cli(); /* Disable interrupts */ /* * clear delta_msr_wait queue to avoid mem leaks: we may free the irq * here so the queue might never be waken up */ wake_up_interruptible(&info->delta_msr_wait); /* * Free the IRQ, if necessary */ if (info->xmit_buf) { free_page((unsigned long) info->xmit_buf); info->xmit_buf = 0; } info->IER = 0; outb(0x00, info->base + UART_IER); /* disable all intrs */ if (!info->tty || (info->tty->termios->c_cflag & HUPCL)) info->MCR &= ~(UART_MCR_DTR | UART_MCR_RTS); outb(info->MCR, info->base + UART_MCR); /* clear Rx/Tx FIFO's */ outb((UART_FCR_CLEAR_RCVR | UART_FCR_CLEAR_XMIT), info->base + UART_FCR); /* read data port to reset things */ (void) inb(info->base + UART_RX); if (info->tty) set_bit(TTY_IO_ERROR, &info->tty->flags); info->flags &= ~ASYNC_INITIALIZED; restore_flags(flags); } /* * This routine is called to set the UART divisor registers to match * the specified baud rate for a serial port. */ static int mxser_change_speed(struct mxser_struct *info, struct termios *old_termios) { int quot = 0; unsigned cflag, cval, fcr; int i; int ret = 0; unsigned long flags; if (!info->tty || !info->tty->termios) return ret; cflag = info->tty->termios->c_cflag; if (!(info->base)) return ret; #ifndef B921600 #define B921600 (B460800 +1) #endif switch (cflag & (CBAUD | CBAUDEX)) { case B921600: i = 20; break; case B460800: i = 19; break; case B230400: i = 18; break; case B115200: i = 17; break; case B57600: i = 16; break; case B38400: i = 15; break; case B19200: i = 14; break; case B9600: i = 13; break; case B4800: i = 12; break; case B2400: i = 11; break; case B1800: i = 10; break; case B1200: i = 9; break; case B600: i = 8; break; case B300: i = 7; break; case B200: i = 6; break; case B150: i = 5; break; case B134: i = 4; break; case B110: i = 3; break; case B75: i = 2; break; case B50: i = 1; break; default: i = 0; break; } if (i == 15) { if ((info->flags & ASYNC_SPD_MASK) == ASYNC_SPD_HI) i = 16; /* 57600 bps */ if ((info->flags & ASYNC_SPD_MASK) == ASYNC_SPD_VHI) i = 17; /* 115200 bps */ #ifdef ASYNC_SPD_SHI if ((info->flags & ASYNC_SPD_MASK) == ASYNC_SPD_SHI) i = 18; #endif #ifdef ASYNC_SPD_WARP if ((info->flags & ASYNC_SPD_MASK) == ASYNC_SPD_WARP) i = 19; #endif } if (mxvar_baud_table[i] == 134) { quot = (2 * info->baud_base / 269); } else if (mxvar_baud_table[i]) { quot = info->baud_base / mxvar_baud_table[i]; if (!quot && old_termios) { /* re-calculate */ info->tty->termios->c_cflag &= ~CBAUD; info->tty->termios->c_cflag |= (old_termios->c_cflag & CBAUD); switch (info->tty->termios->c_cflag & (CBAUD | CBAUDEX)) { case B921600: i = 20; break; case B460800: i = 19; break; case B230400: i = 18; break; case B115200: i = 17; break; case B57600: i = 16; break; case B38400: i = 15; break; case B19200: i = 14; break; case B9600: i = 13; break; case B4800: i = 12; break; case B2400: i = 11; break; case B1800: i = 10; break; case B1200: i = 9; break; case B600: i = 8; break; case B300: i = 7; break; case B200: i = 6; break; case B150: i = 5; break; case B134: i = 4; break; case B110: i = 3; break; case B75: i = 2; break; case B50: i = 1; break; default: i = 0; break; } if (i == 15) { if ((info->flags & ASYNC_SPD_MASK) == ASYNC_SPD_HI) i = 16; /* 57600 bps */ if ((info->flags & ASYNC_SPD_MASK) == ASYNC_SPD_VHI) i = 17; /* 115200 bps */ #ifdef ASYNC_SPD_SHI if ((info->flags & ASYNC_SPD_MASK) == ASYNC_SPD_SHI) i = 18; #endif #ifdef ASYNC_SPD_WARP if ((info->flags & ASYNC_SPD_MASK) == ASYNC_SPD_WARP) i = 19; #endif } if (mxvar_baud_table[i] == 134) { quot = (2 * info->baud_base / 269); } else if (mxvar_baud_table[i]) { quot = info->baud_base / mxvar_baud_table[i]; if (quot == 0) quot = 1; } else { quot = 0; } } else if (quot == 0) quot = 1; } else { quot = 0; } if (quot) { info->MCR |= UART_MCR_DTR; save_flags(flags); cli(); outb(info->MCR, info->base + UART_MCR); restore_flags(flags); } else { info->MCR &= ~UART_MCR_DTR; save_flags(flags); cli(); outb(info->MCR, info->base + UART_MCR); restore_flags(flags); return ret; } /* byte size and parity */ switch (cflag & CSIZE) { case CS5: cval = 0x00; break; case CS6: cval = 0x01; break; case CS7: cval = 0x02; break; case CS8: cval = 0x03; break; default: cval = 0x00; break; /* too keep GCC shut... */ } if (cflag & CSTOPB) cval |= 0x04; if (cflag & PARENB) cval |= UART_LCR_PARITY; if (!(cflag & PARODD)) cval |= UART_LCR_EPAR; if ((info->type == PORT_8250) || (info->type == PORT_16450)) { fcr = 0; } else { fcr = UART_FCR_ENABLE_FIFO; switch (info->rx_trigger) { case 1: fcr |= UART_FCR_TRIGGER_1; break; case 4: fcr |= UART_FCR_TRIGGER_4; break; case 8: fcr |= UART_FCR_TRIGGER_8; break; default: fcr |= UART_FCR_TRIGGER_14; } } /* CTS flow control flag and modem status interrupts */ info->IER &= ~UART_IER_MSI; info->MCR &= ~UART_MCR_AFE; if (cflag & CRTSCTS) { info->flags |= ASYNC_CTS_FLOW; info->IER |= UART_IER_MSI; if (info->type == PORT_16550A) info->MCR |= UART_MCR_AFE; } else { info->flags &= ~ASYNC_CTS_FLOW; } outb(info->MCR, info->base + UART_MCR); if (cflag & CLOCAL) info->flags &= ~ASYNC_CHECK_CD; else { info->flags |= ASYNC_CHECK_CD; info->IER |= UART_IER_MSI; } outb(info->IER, info->base + UART_IER); /* * Set up parity check flag */ info->read_status_mask = UART_LSR_OE | UART_LSR_THRE | UART_LSR_DR; if (I_INPCK(info->tty)) info->read_status_mask |= UART_LSR_FE | UART_LSR_PE; if (I_BRKINT(info->tty) || I_PARMRK(info->tty)) info->read_status_mask |= UART_LSR_BI; info->ignore_status_mask = 0; #if 0 /* This should be safe, but for some broken bits of hardware... */ if (I_IGNPAR(info->tty)) { info->ignore_status_mask |= UART_LSR_PE | UART_LSR_FE; info->read_status_mask |= UART_LSR_PE | UART_LSR_FE; } #endif if (I_IGNBRK(info->tty)) { info->ignore_status_mask |= UART_LSR_BI; info->read_status_mask |= UART_LSR_BI; /* * If we're ignore parity and break indicators, ignore * overruns too. (For real raw support). */ if (I_IGNPAR(info->tty)) { info->ignore_status_mask |= UART_LSR_OE | UART_LSR_PE | UART_LSR_FE; info->read_status_mask |= UART_LSR_OE | UART_LSR_PE | UART_LSR_FE; } } save_flags(flags); cli(); outb(cval | UART_LCR_DLAB, info->base + UART_LCR); /* set DLAB */ outb(quot & 0xff, info->base + UART_DLL); /* LS of divisor */ outb(quot >> 8, info->base + UART_DLM); /* MS of divisor */ outb(cval, info->base + UART_LCR); /* reset DLAB */ outb(fcr, info->base + UART_FCR); /* set fcr */ restore_flags(flags); return ret; } /* * ------------------------------------------------------------ * friends of mxser_ioctl() * ------------------------------------------------------------ */ static int mxser_get_serial_info(struct mxser_struct *info, struct serial_struct *retinfo) { struct serial_struct tmp; if (!retinfo) return (-EFAULT); memset(&tmp, 0, sizeof(tmp)); tmp.type = info->type; tmp.line = info->port; tmp.port = info->base; tmp.irq = info->irq; tmp.flags = info->flags; tmp.baud_base = info->baud_base; tmp.close_delay = info->close_delay; tmp.closing_wait = info->closing_wait; tmp.custom_divisor = info->custom_divisor; tmp.hub6 = 0; return copy_to_user(retinfo, &tmp, sizeof(*retinfo)) ? -EFAULT : 0; } static int mxser_set_serial_info(struct mxser_struct *info, struct serial_struct *new_info) { struct serial_struct new_serial; unsigned int flags; int retval = 0; if (!new_info || !info->base) return (-EFAULT); if (copy_from_user(&new_serial, new_info, sizeof(new_serial))) return -EFAULT; if ((new_serial.irq != info->irq) || (new_serial.port != info->base) || (new_serial.type != info->type) || (new_serial.custom_divisor != info->custom_divisor) || (new_serial.baud_base != info->baud_base)) return (-EPERM); flags = info->flags & ASYNC_SPD_MASK; if (!suser()) { if ((new_serial.baud_base != info->baud_base) || (new_serial.close_delay != info->close_delay) || ((new_serial.flags & ~ASYNC_USR_MASK) != (info->flags & ~ASYNC_USR_MASK))) return (-EPERM); info->flags = ((info->flags & ~ASYNC_USR_MASK) | (new_serial.flags & ASYNC_USR_MASK)); } else { /* * OK, past this point, all the error checking has been done. * At this point, we start making changes..... */ info->flags = ((info->flags & ~ASYNC_FLAGS) | (new_serial.flags & ASYNC_FLAGS)); info->close_delay = new_serial.close_delay * HZ / 100; info->closing_wait = new_serial.closing_wait * HZ / 100; } if (info->flags & ASYNC_INITIALIZED) { if (flags != (info->flags & ASYNC_SPD_MASK)) { mxser_change_speed(info, 0); } } else retval = mxser_startup(info); return (retval); } /* * mxser_get_lsr_info - get line status register info * * Purpose: Let user call ioctl() to get info when the UART physically * is emptied. On bus types like RS485, the transmitter must * release the bus after transmitting. This must be done when * the transmit shift register is empty, not be done when the * transmit holding register is empty. This functionality * allows an RS485 driver to be written in user space. */ static int mxser_get_lsr_info(struct mxser_struct *info, unsigned int *value) { unsigned char status; unsigned int result; unsigned long flags; save_flags(flags); cli(); status = inb(info->base + UART_LSR); restore_flags(flags); result = ((status & UART_LSR_TEMT) ? TIOCSER_TEMT : 0); return put_user(result, value); } /* * This routine sends a break character out the serial port. */ static void mxser_send_break(struct mxser_struct *info, int duration) { unsigned long flags; if (!info->base) return; set_current_state(TASK_INTERRUPTIBLE); save_flags(flags); cli(); outb(inb(info->base + UART_LCR) | UART_LCR_SBC, info->base + UART_LCR); schedule_timeout(duration); outb(inb(info->base + UART_LCR) & ~UART_LCR_SBC, info->base + UART_LCR); restore_flags(flags); } static int mxser_get_modem_info(struct mxser_struct *info, unsigned int *value) { unsigned char control, status; unsigned int result; unsigned long flags; control = info->MCR; save_flags(flags); cli(); status = inb(info->base + UART_MSR); if (status & UART_MSR_ANY_DELTA) mxser_check_modem_status(info, status); restore_flags(flags); result = ((control & UART_MCR_RTS) ? TIOCM_RTS : 0) | ((control & UART_MCR_DTR) ? TIOCM_DTR : 0) | ((status & UART_MSR_DCD) ? TIOCM_CAR : 0) | ((status & UART_MSR_RI) ? TIOCM_RNG : 0) | ((status & UART_MSR_DSR) ? TIOCM_DSR : 0) | ((status & UART_MSR_CTS) ? TIOCM_CTS : 0); return put_user(result, value); } static int mxser_set_modem_info(struct mxser_struct *info, unsigned int cmd, unsigned int *value) { unsigned int arg; unsigned long flags; if(get_user(arg, value)) return -EFAULT; switch (cmd) { case TIOCMBIS: if (arg & TIOCM_RTS) info->MCR |= UART_MCR_RTS; if (arg & TIOCM_DTR) info->MCR |= UART_MCR_DTR; break; case TIOCMBIC: if (arg & TIOCM_RTS) info->MCR &= ~UART_MCR_RTS; if (arg & TIOCM_DTR) info->MCR &= ~UART_MCR_DTR; break; case TIOCMSET: info->MCR = ((info->MCR & ~(UART_MCR_RTS | UART_MCR_DTR)) | ((arg & TIOCM_RTS) ? UART_MCR_RTS : 0) | ((arg & TIOCM_DTR) ? UART_MCR_DTR : 0)); break; default: return (-EINVAL); } save_flags(flags); cli(); outb(info->MCR, info->base + UART_MCR); restore_flags(flags); return (0); } static int mxser_read_register(int, unsigned short *); static int mxser_program_mode(int); static void mxser_normal_mode(int); static int mxser_get_ISA_conf(int cap, struct mxser_hwconf *hwconf) { int id, i, bits; unsigned short regs[16], irq; unsigned char scratch, scratch2; id = mxser_read_register(cap, regs); if (id == C168_ASIC_ID) hwconf->board_type = MXSER_BOARD_C168_ISA; else if (id == C104_ASIC_ID) hwconf->board_type = MXSER_BOARD_C104_ISA; else if (id == C102_ASIC_ID) hwconf->board_type = MXSER_BOARD_C102_ISA; else if (id == CI132_ASIC_ID) hwconf->board_type = MXSER_BOARD_CI132; else if (id == CI134_ASIC_ID) hwconf->board_type = MXSER_BOARD_CI134; else if (id == CI104J_ASIC_ID) hwconf->board_type = MXSER_BOARD_CI104J; else return (0); irq = regs[9] & 0x0F; irq = irq | (irq << 4); irq = irq | (irq << 8); if ((irq != regs[9]) || ((id == 1) && (irq != regs[10]))) { return (MXSER_ERR_IRQ_CONFLIT); } if (!irq) { return (MXSER_ERR_IRQ); } for (i = 0; i < 8; i++) hwconf->ioaddr[i] = (int) regs[i + 1] & 0xFFF8; hwconf->irq = (int) (irq & 0x0F); if ((regs[12] & 0x80) == 0) { return (MXSER_ERR_VECTOR); } hwconf->vector = (int) regs[11]; /* interrupt vector */ if (id == 1) hwconf->vector_mask = 0x00FF; else hwconf->vector_mask = 0x000F; for (i = 7, bits = 0x0100; i >= 0; i--, bits <<= 1) { if (regs[12] & bits) hwconf->baud_base[i] = 921600; else hwconf->baud_base[i] = 115200; } scratch2 = inb(cap + UART_LCR) & (~UART_LCR_DLAB); outb(scratch2 | UART_LCR_DLAB, cap + UART_LCR); outb(0, cap + UART_EFR); /* EFR is the same as FCR */ outb(scratch2, cap + UART_LCR); outb(UART_FCR_ENABLE_FIFO, cap + UART_FCR); scratch = inb(cap + UART_IIR); if (scratch & 0xC0) hwconf->uart_type = PORT_16550A; else hwconf->uart_type = PORT_16450; if (id == 1) hwconf->ports = 8; else hwconf->ports = 4; return (hwconf->ports); } #define CHIP_SK 0x01 /* Serial Data Clock in Eprom */ #define CHIP_DO 0x02 /* Serial Data Output in Eprom */ #define CHIP_CS 0x04 /* Serial Chip Select in Eprom */ #define CHIP_DI 0x08 /* Serial Data Input in Eprom */ #define EN_CCMD 0x000 /* Chip's command register */ #define EN0_RSARLO 0x008 /* Remote start address reg 0 */ #define EN0_RSARHI 0x009 /* Remote start address reg 1 */ #define EN0_RCNTLO 0x00A /* Remote byte count reg WR */ #define EN0_RCNTHI 0x00B /* Remote byte count reg WR */ #define EN0_DCFG 0x00E /* Data configuration reg WR */ #define EN0_PORT 0x010 /* Rcv missed frame error counter RD */ #define ENC_PAGE0 0x000 /* Select page 0 of chip registers */ #define ENC_PAGE3 0x0C0 /* Select page 3 of chip registers */ static int mxser_read_register(int port, unsigned short *regs) { int i, k, value, id; unsigned int j; id = mxser_program_mode(port); if (id < 0) return (id); for (i = 0; i < 14; i++) { k = (i & 0x3F) | 0x180; for (j = 0x100; j > 0; j >>= 1) { outb(CHIP_CS, port); if (k & j) { outb(CHIP_CS | CHIP_DO, port); outb(CHIP_CS | CHIP_DO | CHIP_SK, port); /* A? bit of read */ } else { outb(CHIP_CS, port); outb(CHIP_CS | CHIP_SK, port); /* A? bit of read */ } } (void) inb(port); value = 0; for (k = 0, j = 0x8000; k < 16; k++, j >>= 1) { outb(CHIP_CS, port); outb(CHIP_CS | CHIP_SK, port); if (inb(port) & CHIP_DI) value |= j; } regs[i] = value; outb(0, port); } mxser_normal_mode(port); return (id); } static int mxser_program_mode(int port) { int id, i, j, n; unsigned long flags; save_flags(flags); cli(); outb(0, port); outb(0, port); outb(0, port); (void) inb(port); (void) inb(port); outb(0, port); (void) inb(port); restore_flags(flags); id = inb(port + 1) & 0x1F; if ((id != C168_ASIC_ID) && (id != C104_ASIC_ID) && (id != CI104J_ASIC_ID) && (id != C102_ASIC_ID) && (id != CI132_ASIC_ID) && (id != CI134_ASIC_ID)) return (-1); for (i = 0, j = 0; i < 4; i++) { n = inb(port + 2); if (n == 'M') { j = 1; } else if ((j == 1) && (n == 1)) { j = 2; break; } else j = 0; } if (j != 2) id = -2; return (id); } static void mxser_normal_mode(int port) { int i, n; outb(0xA5, port + 1); outb(0x80, port + 3); outb(12, port + 0); /* 9600 bps */ outb(0, port + 1); outb(0x03, port + 3); /* 8 data bits */ outb(0x13, port + 4); /* loop back mode */ for (i = 0; i < 16; i++) { n = inb(port + 5); if ((n & 0x61) == 0x60) break; if ((n & 1) == 1) (void) inb(port); } outb(0x00, port + 4); }