OpenCores
URL https://opencores.org/ocsvn/or1k/or1k/trunk

Subversion Repositories or1k

[/] [or1k/] [trunk/] [linux/] [linux-2.4/] [drivers/] [char/] [rio/] [riospace.h] - Rev 1275

Go to most recent revision | Compare with Previous | Blame | View Log

/*
** -----------------------------------------------------------------------------
**
**  Perle Specialix driver for Linux
**  Ported from existing RIO Driver for SCO sources.
 *
 *  (C) 1990 - 2000 Specialix International Ltd., Byfleet, Surrey, UK.
 *
 *      This program is free software; you can redistribute it and/or modify
 *      it under the terms of the GNU General Public License as published by
 *      the Free Software Foundation; either version 2 of the License, or
 *      (at your option) any later version.
 *
 *      This program is distributed in the hope that it will be useful,
 *      but WITHOUT ANY WARRANTY; without even the implied warranty of
 *      MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 *      GNU General Public License for more details.
 *
 *      You should have received a copy of the GNU General Public License
 *      along with this program; if not, write to the Free Software
 *      Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
**
**	Module		: riospace.h
**	SID		: 1.2
**	Last Modified	: 11/6/98 11:34:13
**	Retrieved	: 11/6/98 11:34:22
**
**  ident @(#)riospace.h	1.2
**
** -----------------------------------------------------------------------------
*/
 
#ifndef __rio_riospace_h__
#define __rio_riospace_h__
 
#ifdef SCCS_LABELS
static char *_riospace_h_sccs_ = "@(#)riospace.h	1.2";
#endif
 
#define	RIO_LOCATOR_LEN	16
#define	MAX_RIO_BOARDS	4
 
/*
** DONT change this file. At all. Unless you can rebuild the entire
** device driver, which you probably can't, then the rest of the
** driver won't see any changes you make here. So don't make any.
** In particular, it won't be able to see changes to RIO_SLOTS
*/
 
struct Conf
{
	char         Locator[24];
	unsigned int StartupTime;
	unsigned int SlowCook;
	unsigned int IntrPollTime;
	unsigned int BreakInterval;
	unsigned int Timer;
	unsigned int RtaLoadBase;
	unsigned int HostLoadBase;
	unsigned int XpHz;
	unsigned int XpCps;
	char         *XpOn;
	char         *XpOff;
	unsigned int MaxXpCps;
	unsigned int MinXpCps;
	unsigned int SpinCmds;
	unsigned int FirstAddr;
	unsigned int LastAddr;
	unsigned int BufferSize;
	unsigned int LowWater;
	unsigned int LineLength;
	unsigned int CmdTime;
};
 
/*
**	Board types - these MUST correspond to product codes!
*/ 
#define	RIO_EMPTY	0x0
#define	RIO_EISA	0x3
#define	RIO_RTA_16	0x9
#define	RIO_AT		0xA
#define	RIO_MCA		0xB
#define	RIO_PCI		0xD
#define	RIO_RTA		0xE
 
/*
**	Board data structure. This is used for configuration info
*/
struct	Brd
{
    unsigned char Type;	/* RIO_EISA, RIO_MCA, RIO_AT, RIO_EMPTY... */
    unsigned char Ivec;	/* POLLED or ivec number */
    unsigned char Mode;	/* Control stuff, see below */
};
 
struct	Board
{
    char       Locator[RIO_LOCATOR_LEN];
    int        NumSlots;
    struct Brd Boards[MAX_RIO_BOARDS];
};
 
#define	BOOT_FROM_LINK		0x00
#define	BOOT_FROM_RAM		0x01
#define	EXTERNAL_BUS_OFF	0x00
#define	EXTERNAL_BUS_ON		0x02
#define	INTERRUPT_DISABLE	0x00
#define	INTERRUPT_ENABLE	0x04
#define	BYTE_OPERATION		0x00
#define	WORD_OPERATION		0x08
#define	POLLED			INTERRUPT_DISABLE
#define	IRQ_15			(0x00 | INTERRUPT_ENABLE)
#define	IRQ_12			(0x10 | INTERRUPT_ENABLE)
#define	IRQ_11			(0x20 | INTERRUPT_ENABLE)
#define	IRQ_9			(0x30 | INTERRUPT_ENABLE)
#define	SLOW_LINKS		0x00
#define	FAST_LINKS		0x40
#define	SLOW_AT_BUS		0x00
#define	FAST_AT_BUS		0x80
#define	SLOW_PCI_TP		0x00
#define	FAST_PCI_TP		0x80
/*
**	Debug levels
*/
#define	DBG_NONE	0x00000000
 
#define	DBG_INIT	0x00000001
#define	DBG_OPEN	0x00000002
#define	DBG_CLOSE	0x00000004
#define	DBG_IOCTL	0x00000008
 
#define	DBG_READ	0x00000010
#define	DBG_WRITE	0x00000020
#define	DBG_INTR	0x00000040
#define	DBG_PROC	0x00000080
 
#define	DBG_PARAM	0x00000100
#define	DBG_CMD		0x00000200
#define	DBG_XPRINT	0x00000400
#define	DBG_POLL	0x00000800
 
#define	DBG_DAEMON	0x00001000
#define	DBG_FAIL	0x00002000
#define DBG_MODEM	0x00004000
#define	DBG_LIST	0x00008000
 
#define	DBG_ROUTE	0x00010000
#define DBG_UTIL        0x00020000
#define DBG_BOOT	0x00040000
#define DBG_BUFFER	0x00080000
 
#define	DBG_MON		0x00100000
#define DBG_SPECIAL     0x00200000
#define	DBG_VPIX	0x00400000
#define	DBG_FLUSH	0x00800000
 
#define	DBG_QENABLE	0x01000000
 
#define	DBG_ALWAYS	0x80000000
 
#endif /* __rio_riospace_h__ */
 

Go to most recent revision | Compare with Previous | Blame | View Log

powered by: WebSVN 2.1.0

© copyright 1999-2024 OpenCores.org, equivalent to Oliscience, all rights reserved. OpenCores®, registered trademark.