URL
https://opencores.org/ocsvn/or1k/or1k/trunk
Subversion Repositories or1k
[/] [or1k/] [trunk/] [linux/] [linux-2.4/] [drivers/] [char/] [sh-sci.c] - Rev 1774
Go to most recent revision | Compare with Previous | Blame | View Log
/* $Id: sh-sci.c,v 1.1.1.1 2004-04-15 01:58:43 phoenix Exp $ * * linux/drivers/char/sh-sci.c * * SuperH on-chip serial module support. (SCI with no FIFO / with FIFO) * Copyright (C) 1999, 2000 Niibe Yutaka * Copyright (C) 2000 Sugioka Toshinobu * Modified to support multiple serial ports. Stuart Menefy (May 2000). * Modified to support SecureEdge. David McCullough (2002) * Modified to support SH7300 SCIF. Takashi Kusuda (Jun 2003). * * TTY code is based on sx.c (Specialix SX driver) by: * * (C) 1998 R.E.Wolff@BitWizard.nl * */ #include <linux/config.h> #include <linux/module.h> #include <linux/errno.h> #include <linux/signal.h> #include <linux/sched.h> #include <linux/timer.h> #include <linux/interrupt.h> #include <linux/tty.h> #include <linux/tty_flip.h> #include <linux/serial.h> #include <linux/major.h> #include <linux/string.h> #include <linux/fcntl.h> #include <linux/ptrace.h> #include <linux/ioport.h> #include <linux/mm.h> #include <linux/slab.h> #include <linux/init.h> #include <linux/delay.h> #if defined(CONFIG_SERIAL_CONSOLE) || defined(CONFIG_SH_KGDB_CONSOLE) #include <linux/console.h> #endif #include <asm/system.h> #include <asm/io.h> #include <asm/irq.h> #include <asm/uaccess.h> #include <asm/bitops.h> #include <linux/generic_serial.h> #ifdef CONFIG_SH_STANDARD_BIOS #include <asm/sh_bios.h> #endif #include "sh-sci.h" #ifdef CONFIG_SH_KGDB #include <asm/kgdb.h> int kgdb_sci_setup(void); static int kgdb_get_char(struct sci_port *port); static void kgdb_put_char(struct sci_port *port, char c); static void kgdb_handle_error(struct sci_port *port); static struct sci_port *kgdb_sci_port; #ifdef CONFIG_SH_KGDB_CONSOLE static struct console kgdbcons; void __init kgdb_console_init(void); #endif /* CONFIG_SH_KGDB_CONSOLE */ #endif /* CONFIG_SH_KGDB */ #ifdef CONFIG_SERIAL_CONSOLE static struct console sercons; static struct sci_port* sercons_port=0; static int sercons_baud; #ifdef CONFIG_MAGIC_SYSRQ #include <linux/sysrq.h> static int break_pressed; #endif /* CONFIG_MAGIC_SYSRQ */ #endif /* CONFIG_SERIAL_CONSOLE */ /* Function prototypes */ #if !defined(SCIF_ONLY) static void sci_init_pins_sci(struct sci_port* port, unsigned int cflag); #endif #ifndef SCI_ONLY static void sci_init_pins_scif(struct sci_port* port, unsigned int cflag); #if defined(__sh3__) && !defined(CONFIG_CPU_SUBTYPE_SH7300) static void sci_init_pins_irda(struct sci_port* port, unsigned int cflag); #endif #endif static void sci_disable_tx_interrupts(void *ptr); static void sci_enable_tx_interrupts(void *ptr); static void sci_disable_rx_interrupts(void *ptr); static void sci_enable_rx_interrupts(void *ptr); static int sci_get_CD(void *ptr); static void sci_shutdown_port(void *ptr); static int sci_set_real_termios(void *ptr); static void sci_hungup(void *ptr); static void sci_close(void *ptr); static int sci_chars_in_buffer(void *ptr); static int sci_request_irq(struct sci_port *port); static void sci_free_irq(struct sci_port *port); static int sci_init_drivers(void); static struct tty_driver sci_driver, sci_callout_driver; static struct sci_port sci_ports[SCI_NPORTS] = SCI_INIT; static struct tty_struct *sci_table[SCI_NPORTS] = { NULL, }; static struct termios *sci_termios[SCI_NPORTS]; static struct termios *sci_termios_locked[SCI_NPORTS]; static int sci_refcount; static int sci_debug = 0; #ifdef MODULE MODULE_PARM(sci_debug, "i"); #endif #define dprintk(x...) do { if (sci_debug) printk(x); } while(0) #ifdef CONFIG_SERIAL_CONSOLE static void put_char(struct sci_port *port, char c) { unsigned long flags; unsigned short status; save_and_cli(flags); do status = sci_in(port, SCxSR); while (!(status & SCxSR_TDxE(port))); sci_out(port, SCxTDR, c); sci_in(port, SCxSR); /* Dummy read */ sci_out(port, SCxSR, SCxSR_TDxE_CLEAR(port)); restore_flags(flags); } #endif #if defined(CONFIG_SH_STANDARD_BIOS) || defined(CONFIG_SH_KGDB) static void handle_error(struct sci_port *port) { /* Clear error flags */ sci_out(port, SCxSR, SCxSR_ERROR_CLEAR(port)); } static int get_char(struct sci_port *port) { unsigned long flags; unsigned short status; int c; save_and_cli(flags); do { status = sci_in(port, SCxSR); if (status & SCxSR_ERRORS(port)) { handle_error(port); continue; } } while (!(status & SCxSR_RDxF(port))); c = sci_in(port, SCxRDR); sci_in(port, SCxSR); /* Dummy read */ sci_out(port, SCxSR, SCxSR_RDxF_CLEAR(port)); restore_flags(flags); return c; } /* Taken from sh-stub.c of GDB 4.18 */ static const char hexchars[] = "0123456789abcdef"; static __inline__ char highhex(int x) { return hexchars[(x >> 4) & 0xf]; } static __inline__ char lowhex(int x) { return hexchars[x & 0xf]; } #endif /* CONFIG_SH_STANDARD_BIOS || CONFIG_SH_KGDB */ /* * Send the packet in buffer. The host gets one chance to read it. * This routine does not wait for a positive acknowledge. */ #ifdef CONFIG_SERIAL_CONSOLE static void put_string(struct sci_port *port, const char *buffer, int count) { int i; const unsigned char *p = buffer; #if defined(CONFIG_SH_STANDARD_BIOS) || defined(CONFIG_SH_KGDB) int checksum; int usegdb=0; #ifdef CONFIG_SH_STANDARD_BIOS /* This call only does a trap the first time it is * called, and so is safe to do here unconditionally */ usegdb |= sh_bios_in_gdb_mode(); #endif #ifdef CONFIG_SH_KGDB usegdb |= (kgdb_in_gdb_mode && (port == kgdb_sci_port)); #endif if (usegdb) { /* $<packet info>#<checksum>. */ do { unsigned char c; put_char(port, '$'); put_char(port, 'O'); /* 'O'utput to console */ checksum = 'O'; for (i=0; i<count; i++) { /* Don't use run length encoding */ int h, l; c = *p++; h = highhex(c); l = lowhex(c); put_char(port, h); put_char(port, l); checksum += h + l; } put_char(port, '#'); put_char(port, highhex(checksum)); put_char(port, lowhex(checksum)); } while (get_char(port) != '+'); } else #endif /* CONFIG_SH_STANDARD_BIOS || CONFIG_SH_KGDB */ for (i=0; i<count; i++) { if (*p == 10) put_char(port, '\r'); put_char(port, *p++); } } #endif /* CONFIG_SERIAL_CONSOLE */ #if defined(CONFIG_SH_SECUREEDGE5410) struct timer_list sci_timer_struct; static unsigned char sci_dcdstatus[2]; /* * This subroutine is called when the RS_TIMER goes off. It is used * to monitor the state of the DCD lines - since they have no edge * sensors and interrupt generators. */ static void sci_timer(unsigned long data) { unsigned short s, i; unsigned char dcdstatus[2]; s = SECUREEDGE_READ_IOPORT(); dcdstatus[0] = !(s & 0x10); dcdstatus[1] = !(s & 0x1); for (i = 0; i < 2; i++) { if (dcdstatus[i] != sci_dcdstatus[i]) { if (sci_ports[i].gs.count != 0) { if (sci_ports[i].gs.flags & ASYNC_CHECK_CD) { if (dcdstatus[i]) { /* DCD has gone high */ wake_up_interruptible(&sci_ports[i].gs.open_wait); } else if (!((sci_ports[i].gs.flags&ASYNC_CALLOUT_ACTIVE) && (sci_ports[i].gs.flags & ASYNC_CALLOUT_NOHUP))) { if (sci_ports[i].gs.tty) tty_hangup(sci_ports[i].gs.tty); } } } } sci_dcdstatus[i] = dcdstatus[i]; } sci_timer_struct.expires = jiffies + HZ/25; add_timer(&sci_timer_struct); } #endif #ifdef CONFIG_SH_KGDB /* Is the SCI ready, ie is there a char waiting? */ static int kgdb_is_char_ready(struct sci_port *port) { unsigned short status = sci_in(port, SCxSR); if (status & (SCxSR_ERRORS(port) | SCxSR_BRK(port))) kgdb_handle_error(port); return (status & SCxSR_RDxF(port)); } /* Write a char */ static void kgdb_put_char(struct sci_port *port, char c) { unsigned short status; do status = sci_in(port, SCxSR); while (!(status & SCxSR_TDxE(port))); sci_out(port, SCxTDR, c); sci_in(port, SCxSR); /* Dummy read */ sci_out(port, SCxSR, SCxSR_TDxE_CLEAR(port)); } /* Get a char if there is one, else ret -1 */ static int kgdb_get_char(struct sci_port *port) { int c; if (kgdb_is_char_ready(port) == 0) c = -1; else { c = sci_in(port, SCxRDR); sci_in(port, SCxSR); /* Dummy read */ sci_out(port, SCxSR, SCxSR_RDxF_CLEAR(port)); } return c; } /* Called from kgdbstub.c to get a character, i.e. is blocking */ static int kgdb_sci_getchar(void) { volatile int c; /* Keep trying to read a character, this could be neater */ while ((c = kgdb_get_char(kgdb_sci_port)) < 0); return c; } /* Called from kgdbstub.c to put a character, just a wrapper */ static void kgdb_sci_putchar(int c) { kgdb_put_char(kgdb_sci_port, c); } /* Clear any errors on the SCI */ static void kgdb_handle_error(struct sci_port *port) { sci_out(port, SCxSR, SCxSR_ERROR_CLEAR(port)); /* Clear error flags */ } /* Breakpoint if there's a break sent on the serial port */ static void kgdb_break_interrupt(int irq, void *ptr, struct pt_regs *regs) { struct sci_port *port = ptr; unsigned short status = sci_in(port, SCxSR); if (status & SCxSR_BRK(port)) { /* Break into the debugger if a break is detected */ BREAKPOINT(); /* Clear */ sci_out(port, SCxSR, SCxSR_BREAK_CLEAR(port)); return; } } #endif /* CONFIG_SH_KGDB */ static struct real_driver sci_real_driver = { sci_disable_tx_interrupts, sci_enable_tx_interrupts, sci_disable_rx_interrupts, sci_enable_rx_interrupts, sci_get_CD, sci_shutdown_port, sci_set_real_termios, sci_chars_in_buffer, sci_close, sci_hungup, NULL }; #if defined(SCI_ONLY) || defined(SCI_AND_SCIF) static void sci_init_pins_sci(struct sci_port* port, unsigned int cflag) { } #endif #if defined(SCIF_ONLY) || defined(SCI_AND_SCIF) #if defined(__sh3__) /* For SH7300, SH7707, SH7709, SH7709A, SH7729 */ static void sci_init_pins_scif(struct sci_port* port, unsigned int cflag) { unsigned int fcr_val = 0; #if !defined(CONFIG_CPU_SUBTYPE_SH7300) /* SH7300 doesn't use RTS/CTS */ { unsigned short data; /* We need to set SCPCR to enable RTS/CTS */ data = ctrl_inw(SCPCR); /* Clear out SCP7MD1,0, SCP6MD1,0, SCP4MD1,0*/ ctrl_outw(data&0x0cff, SCPCR); } if (cflag & CRTSCTS) fcr_val |= SCFCR_MCE; else { unsigned short data; /* We need to set SCPCR to enable RTS/CTS */ data = ctrl_inw(SCPCR); /* Clear out SCP7MD1,0, SCP4MD1,0, Set SCP6MD1,0 = {01} (output) */ ctrl_outw((data&0x0cff)|0x1000, SCPCR); data = ctrl_inb(SCPDR); /* Set /RTS2 (bit6) = 0 */ ctrl_outb(data&0xbf, SCPDR); } #endif sci_out(port, SCFCR, fcr_val); } static void sci_init_pins_irda(struct sci_port* port, unsigned int cflag) { unsigned int fcr_val = 0; if (cflag & CRTSCTS) fcr_val |= SCFCR_MCE; sci_out(port, SCFCR, fcr_val); } #else /* For SH7750 */ static void sci_init_pins_scif(struct sci_port* port, unsigned int cflag) { unsigned int fcr_val = 0; if (cflag & CRTSCTS) { fcr_val |= SCFCR_MCE; } else { sci_out(port, SCSPTR, 0x0080); /* Set RTS = 1 */ } sci_out(port, SCFCR, fcr_val); } #endif #endif /* SCIF_ONLY || SCI_AND_SCIF */ static void sci_setsignals(struct sci_port *port, int dtr, int rts) { /* This routine is used for seting signals of: DTR, DCD, CTS/RTS */ /* We use SCIF's hardware for CTS/RTS, so don't need any for that. */ /* If you have signals for DTR and DCD, please implement here. */ #if defined(CONFIG_SH_SECUREEDGE5410) int flags; save_and_cli(flags); if (port == &sci_ports[1]) { /* port 1 only */ if (dtr == 0) SECUREEDGE_WRITE_IOPORT(0x0080, 0x0080); else if (dtr == 1) SECUREEDGE_WRITE_IOPORT(0x0000, 0x0080); } if (port == &sci_ports[0]) { /* port 0 only */ if (dtr == 0) SECUREEDGE_WRITE_IOPORT(0x0200, 0x0200); else if (dtr == 1) SECUREEDGE_WRITE_IOPORT(0x0000, 0x0200); if (rts == 0) SECUREEDGE_WRITE_IOPORT(0x0100, 0x0100); else if (rts == 1) SECUREEDGE_WRITE_IOPORT(0x0000, 0x0100); } restore_flags(flags); #endif } static int sci_getsignals(struct sci_port *port) { /* This routine is used for geting signals of: DTR, DCD, DSR, RI, and CTS/RTS */ #if defined(CONFIG_SH_SECUREEDGE5410) if (port == &sci_ports[1]) { /* port 1 only */ unsigned short s = SECUREEDGE_READ_IOPORT(); int rc = TIOCM_RTS|TIOCM_DSR|TIOCM_CTS; if ((s & 0x0001) == 0) rc |= TIOCM_CAR; if ((SECUREEDGE_READ_IOPORT() & 0x0080) == 0) rc |= TIOCM_DTR; return(rc); } if (port == &sci_ports[0]) { /* port 0 only */ unsigned short s = SECUREEDGE_READ_IOPORT(); int rc = TIOCM_DSR; if ((s & 0x0010) == 0) rc |= TIOCM_CAR; if ((s & 0x0004) == 0) rc |= TIOCM_CTS; if ((SECUREEDGE_READ_IOPORT() & 0x0200) == 0) rc |= TIOCM_DTR; if ((SECUREEDGE_READ_IOPORT() & 0x0100) == 0) rc |= TIOCM_RTS; return(rc); } #endif return TIOCM_DTR|TIOCM_RTS|TIOCM_DSR; } static void sci_set_baud(struct sci_port *port, int baud) { int t; switch (baud) { case 0: t = -1; break; case 2400: t = BPS_2400; break; case 4800: t = BPS_4800; break; case 9600: t = BPS_9600; break; case 19200: t = BPS_19200; break; case 38400: t = BPS_38400; break; case 57600: t = BPS_57600; break; case 230400: if (BPS_230400 != BPS_115200) { t = BPS_230400; break; } default: printk(KERN_INFO "sci: unsupported baud rate: %d, using 115200 instead.\n", baud); case 115200: t = BPS_115200; break; } if (t > 0) { sci_setsignals (port, 1, -1); if(t >= 256) { sci_out(port, SCSMR, (sci_in(port, SCSMR) & ~3) | 1); t >>= 2; } else { sci_out(port, SCSMR, sci_in(port, SCSMR) & ~3); } sci_out(port, SCBRR, t); udelay((1000000+(baud-1)) / baud); /* Wait one bit interval */ } else { sci_setsignals (port, 0, -1); } } static void sci_set_termios_cflag(struct sci_port *port, int cflag, int baud) { unsigned int status; unsigned int smr_val; do status = sci_in(port, SCxSR); while (!(status & SCxSR_TEND(port))); sci_out(port, SCSCR, 0x00); /* TE=0, RE=0, CKE1=0 */ if (port->type == PORT_SCIF) { #if defined(CONFIG_CPU_SUBTYPE_SH7300) sci_out(port, SCFCR, SCFCR_RFRST | SCFCR_TFRST | SCFCR_TCRST); #else sci_out(port, SCFCR, SCFCR_RFRST | SCFCR_TFRST); #endif } smr_val = sci_in(port, SCSMR) & 3; if ((cflag & CSIZE) == CS7) smr_val |= 0x40; if (cflag & PARENB) smr_val |= 0x20; if (cflag & PARODD) smr_val |= 0x30; if (cflag & CSTOPB) smr_val |= 0x08; sci_out(port, SCSMR, smr_val); sci_set_baud(port, baud); port->init_pins(port, cflag); sci_out(port, SCSCR, SCSCR_INIT(port)); if (cflag & CLOCAL) port->gs.flags &= ~ASYNC_CHECK_CD; else port->gs.flags |= ASYNC_CHECK_CD; } static int sci_set_real_termios(void *ptr) { struct sci_port *port = ptr; if (port->old_cflag != port->gs.tty->termios->c_cflag) { port->old_cflag = port->gs.tty->termios->c_cflag; sci_set_termios_cflag(port, port->old_cflag, port->gs.baud); sci_enable_rx_interrupts(port); } return 0; } /* ********************************************************************** * * the interrupt related routines * * ********************************************************************** */ /* * This routine is used by the interrupt handler to schedule * processing in the software interrupt portion of the driver. */ static inline void sci_sched_event(struct sci_port *port, int event) { port->event |= 1 << event; queue_task(&port->tqueue, &tq_immediate); mark_bh(IMMEDIATE_BH); } static void sci_transmit_chars(struct sci_port *port) { unsigned int count, i; unsigned int txroom; unsigned long flags; unsigned short status; unsigned short ctrl; unsigned char c; status = sci_in(port, SCxSR); if (!(status & SCxSR_TDxE(port))) { save_and_cli(flags); ctrl = sci_in(port, SCSCR); if (port->gs.xmit_cnt == 0) { ctrl &= ~SCI_CTRL_FLAGS_TIE; port->gs.flags &= ~GS_TX_INTEN; } else ctrl |= SCI_CTRL_FLAGS_TIE; sci_out(port, SCSCR, ctrl); restore_flags(flags); return; } while (1) { count = port->gs.xmit_cnt; if (port->type == PORT_SCIF) { #if defined(CONFIG_CPU_SUBTYPE_SH7300) txroom = 64 - (sci_in(port, SCFDR)>>8); #else txroom = 16 - (sci_in(port, SCFDR)>>8); #endif } else { txroom = (sci_in(port, SCxSR) & SCI_TDRE)?1:0; } if (count > txroom) count = txroom; /* Don't copy past the end of the source buffer */ if (count > SERIAL_XMIT_SIZE - port->gs.xmit_tail) count = SERIAL_XMIT_SIZE - port->gs.xmit_tail; /* If for one reason or another, we can't copy more data, we're done! */ if (count == 0) break; for (i=0; i<count; i++) { c = port->gs.xmit_buf[port->gs.xmit_tail + i]; sci_out(port, SCxTDR, c); } sci_out(port, SCxSR, SCxSR_TDxE_CLEAR(port)); port->icount.tx += count; /* Update the kernel buffer end */ port->gs.xmit_tail = (port->gs.xmit_tail + count) & (SERIAL_XMIT_SIZE-1); /* This one last. (this is essential) It would allow others to start putting more data into the buffer! */ port->gs.xmit_cnt -= count; } if (port->gs.xmit_cnt <= port->gs.wakeup_chars) sci_sched_event(port, SCI_EVENT_WRITE_WAKEUP); save_and_cli(flags); ctrl = sci_in(port, SCSCR); if (port->gs.xmit_cnt == 0) { ctrl &= ~SCI_CTRL_FLAGS_TIE; port->gs.flags &= ~GS_TX_INTEN; } else { if (port->type == PORT_SCIF) { sci_in(port, SCxSR); /* Dummy read */ sci_out(port, SCxSR, SCxSR_TDxE_CLEAR(port)); } ctrl |= SCI_CTRL_FLAGS_TIE; } sci_out(port, SCSCR, ctrl); restore_flags(flags); } /* On SH3, SCIF may read end-of-break as a space->mark char */ #define STEPFN(c) ({int __c=(c); (((__c-1)|(__c)) == -1); }) static inline void sci_receive_chars(struct sci_port *port, struct pt_regs *regs) { int count; struct tty_struct *tty; int copied=0; unsigned short status; status = sci_in(port, SCxSR); if (!(status & SCxSR_RDxF(port))) return; tty = port->gs.tty; while (1) { if (port->type == PORT_SCIF) { #if defined(CONFIG_CPU_SUBTYPE_SH7300) count = sci_in(port, SCFDR)&0x007f; #else count = sci_in(port, SCFDR)&0x001f; #endif } else { count = (sci_in(port, SCxSR)&SCxSR_RDxF(port))?1:0; } /* we must clear RDF or we get stuck in the interrupt for ever */ sci_in(port, SCxSR); /* dummy read */ sci_out(port, SCxSR, SCxSR_RDxF_CLEAR(port)); /* If for any reason we can't copy more data, we're done! */ if (count == 0) break; if (port->type == PORT_SCI) { if (tty->flip.count < TTY_FLIPBUF_SIZE) { *tty->flip.char_buf_ptr++ = sci_in(port, SCxRDR); *tty->flip.flag_buf_ptr++ = TTY_NORMAL; tty->flip.count++; port->icount.rx++; copied++; count--; } } else { while (count > 0 && tty->flip.count < TTY_FLIPBUF_SIZE){ char c = sci_in(port, SCxRDR); status = sci_in(port, SCxSR); #if defined(__SH3__) /* Skip "chars" during break */ if (port->break_flag) { if ((c == 0) && (status & SCxSR_FER(port))) { count--; continue; } /* Nonzero => end-of-break */ dprintk("scif: debounce<%02x>\n", c); port->break_flag = 0; if (STEPFN(c)) { count--; continue; } } #endif /* __SH3__ */ #if defined(CONFIG_SERIAL_CONSOLE) && defined(CONFIG_MAGIC_SYSRQ) if (break_pressed && (port == sercons_port)) { if (c != 0 && time_before(jiffies, break_pressed + HZ*5)) { handle_sysrq(c, regs, NULL, NULL); break_pressed = 0; count--; continue; } else if (c != 0) { break_pressed = 0; } } #endif /* CONFIG_SERIAL_CONSOLE && CONFIG_MAGIC_SYSRQ */ /* Store data and status */ *tty->flip.char_buf_ptr++ = c; if (status&SCxSR_FER(port)) { *tty->flip.flag_buf_ptr++ = TTY_FRAME; dprintk("sci: frame error\n"); } else if (status&SCxSR_PER(port)) { *tty->flip.flag_buf_ptr++ = TTY_PARITY; dprintk("sci: parity error\n"); } else { *tty->flip.flag_buf_ptr++ = TTY_NORMAL; } tty->flip.count++; port->icount.rx++; copied++; count--; } } /* drop any remaining chars, we are full */ if (count > 0) { /* force an overrun error on last received char */ tty->flip.flag_buf_ptr[TTY_FLIPBUF_SIZE - 1] = TTY_OVERRUN; while (count-- > 0) (void) sci_in(port, SCxRDR); } } if (copied) /* Tell the rest of the system the news. New characters! */ tty_flip_buffer_push(tty); else { sci_in(port, SCxSR); /* dummy read */ sci_out(port, SCxSR, SCxSR_RDxF_CLEAR(port)); } } static inline int sci_handle_errors(struct sci_port *port) { int copied = 0; unsigned short status = sci_in(port, SCxSR); struct tty_struct *tty = port->gs.tty; if (status&SCxSR_ORER(port) && tty->flip.count<TTY_FLIPBUF_SIZE) { /* overrun error */ copied++; *tty->flip.flag_buf_ptr++ = TTY_OVERRUN; dprintk("sci: overrun error\n"); } if (status&SCxSR_FER(port) && tty->flip.count<TTY_FLIPBUF_SIZE) { if (sci_rxd_in(port) == 0) { /* Notify of BREAK */ copied++; *tty->flip.flag_buf_ptr++ = TTY_BREAK; dprintk("sci: BREAK detected\n"); } else { /* frame error */ copied++; *tty->flip.flag_buf_ptr++ = TTY_FRAME; dprintk("sci: frame error\n"); } } if (status&SCxSR_PER(port) && tty->flip.count<TTY_FLIPBUF_SIZE) { /* parity error */ copied++; *tty->flip.flag_buf_ptr++ = TTY_PARITY; dprintk("sci: parity error\n"); } if (copied) { tty->flip.count += copied; tty_flip_buffer_push(tty); } return copied; } static inline int sci_handle_breaks(struct sci_port *port) { int copied = 0; unsigned short status = sci_in(port, SCxSR); struct tty_struct *tty = port->gs.tty; if (status&SCxSR_BRK(port) && tty->flip.count<TTY_FLIPBUF_SIZE) { #if defined(__SH3__) /* Debounce break */ if (port->break_flag) goto break_continue; port->break_flag = 1; #endif #if defined(CONFIG_SERIAL_CONSOLE) && defined(CONFIG_MAGIC_SYSRQ) if (port == sercons_port) { if (break_pressed == 0) { break_pressed = jiffies; dprintk("sci: implied sysrq\n"); goto break_continue; } /* Double break implies a real break */ break_pressed = 0; } #endif /* Notify of BREAK */ copied++; *tty->flip.flag_buf_ptr++ = TTY_BREAK; dprintk("sci: BREAK detected\n"); } #if defined(CONFIG_CPU_SH3) || defined(CONFIG_SERIAL_CONSOLE) && defined(CONFIG_MAGIC_SYSRQ) break_continue: #endif #if defined(CONFIG_CPU_SUBTYPE_SH7750) || defined (CONFIG_CPU_SUBTYPE_SH7751) || defined(CONFIG_CPU_SUBTYPE_ST40) /* XXX: Handle SCIF overrun error */ if (port->type == PORT_SCIF && (sci_in(port, SCLSR) & SCIF_ORER) != 0) { sci_out(port, SCLSR, 0); if(tty->flip.count<TTY_FLIPBUF_SIZE) { copied++; *tty->flip.flag_buf_ptr++ = TTY_OVERRUN; dprintk("sci: overrun error\n"); } } #endif if (copied) { tty->flip.count += copied; tty_flip_buffer_push(tty); } return copied; } static void sci_rx_interrupt(int irq, void *ptr, struct pt_regs *regs) { struct sci_port *port = ptr; if (port->gs.flags & GS_ACTIVE) if (!(port->gs.flags & SCI_RX_THROTTLE)) { sci_receive_chars(port, regs); return; } sci_disable_rx_interrupts(port); } static void sci_tx_interrupt(int irq, void *ptr, struct pt_regs *regs) { struct sci_port *port = ptr; if (port->gs.flags & GS_ACTIVE) sci_transmit_chars(port); else { sci_disable_tx_interrupts(port); } } static void sci_er_interrupt(int irq, void *ptr, struct pt_regs *regs) { struct sci_port *port = ptr; /* Handle errors */ if (port->type == PORT_SCI) { if(sci_handle_errors(port)) { /* discard character in rx buffer */ sci_in(port, SCxSR); sci_out(port, SCxSR, SCxSR_RDxF_CLEAR(port)); } } else sci_rx_interrupt(irq, ptr, regs); sci_out(port, SCxSR, SCxSR_ERROR_CLEAR(port)); /* Kick the transmission */ sci_tx_interrupt(irq, ptr, regs); } static void sci_br_interrupt(int irq, void *ptr, struct pt_regs *regs) { struct sci_port *port = ptr; /* Handle BREAKs */ sci_handle_breaks(port); sci_out(port, SCxSR, SCxSR_BREAK_CLEAR(port)); } static void sci_mpxed_interrupt(int irq, void *ptr, struct pt_regs *regs) { unsigned short ssr_status, scr_status; struct sci_port *port = ptr; ssr_status=sci_in(port,SCxSR); scr_status=sci_in(port,SCSCR); if((ssr_status&0x0020) && (scr_status&0x0080)){ /* Tx Interrupt */ sci_tx_interrupt(irq, ptr, regs); } if((ssr_status&0x0002) && (scr_status&0x0040)){ /* Rx Interrupt */ sci_rx_interrupt(irq, ptr, regs); } if((ssr_status&0x0080) && (scr_status&0x0400)){ /* Error Interrupt */ sci_er_interrupt(irq, ptr, regs); } if((ssr_status&0x0010) && (scr_status&0x0200)){ /* Break Interrupt */ sci_br_interrupt(irq, ptr, regs); } } static void do_softint(void *private_) { struct sci_port *port = (struct sci_port *) private_; struct tty_struct *tty; tty = port->gs.tty; if (!tty) return; if (test_and_clear_bit(SCI_EVENT_WRITE_WAKEUP, &port->event)) { if ((tty->flags & (1 << TTY_DO_WRITE_WAKEUP)) && tty->ldisc.write_wakeup) (tty->ldisc.write_wakeup)(tty); wake_up_interruptible(&tty->write_wait); } } /* ********************************************************************** * * Here are the routines that actually * * interface with the generic_serial driver * * ********************************************************************** */ static void sci_disable_tx_interrupts(void *ptr) { struct sci_port *port = ptr; unsigned long flags; unsigned short ctrl; /* Clear TIE (Transmit Interrupt Enable) bit in SCSCR */ save_and_cli(flags); ctrl = sci_in(port, SCSCR); ctrl &= ~SCI_CTRL_FLAGS_TIE; sci_out(port, SCSCR, ctrl); restore_flags(flags); } static void sci_enable_tx_interrupts(void *ptr) { struct sci_port *port = ptr; disable_irq(port->irqs[SCIx_TXI_IRQ]); sci_transmit_chars(port); enable_irq(port->irqs[SCIx_TXI_IRQ]); } static void sci_disable_rx_interrupts(void * ptr) { struct sci_port *port = ptr; unsigned long flags; unsigned short ctrl; /* Clear RIE (Receive Interrupt Enable) bit in SCSCR */ save_and_cli(flags); ctrl = sci_in(port, SCSCR); ctrl &= ~SCI_CTRL_FLAGS_RIE; sci_out(port, SCSCR, ctrl); restore_flags(flags); } static void sci_enable_rx_interrupts(void * ptr) { struct sci_port *port = ptr; unsigned long flags; unsigned short ctrl; /* Set RIE (Receive Interrupt Enable) bit in SCSCR */ save_and_cli(flags); ctrl = sci_in(port, SCSCR); ctrl |= SCI_CTRL_FLAGS_RIE; sci_out(port, SCSCR, ctrl); restore_flags(flags); } static int sci_get_CD(void * ptr) { /* If you have signal for CD (Carrier Detect), please change here. */ #if defined(CONFIG_SH_SECUREEDGE5410) struct sci_port *port = ptr; if (port == &sci_ports[0] || port == &sci_ports[1]) if ((sci_getsignals(port) & TIOCM_CAR) == 0) return 0; #endif return 1; } static int sci_chars_in_buffer(void * ptr) { struct sci_port *port = ptr; if (port->type == PORT_SCIF) { return (sci_in(port, SCFDR) >> 8) + ((sci_in(port, SCxSR) & SCxSR_TEND(port))? 0: 1); } else { return (sci_in(port, SCxSR) & SCxSR_TEND(port))? 0: 1; } } static void sci_shutdown_port(void * ptr) { struct sci_port *port = ptr; port->gs.flags &= ~ GS_ACTIVE; if (port->gs.tty && port->gs.tty->termios->c_cflag & HUPCL) sci_setsignals(port, 0, 0); sci_free_irq(port); } /* ********************************************************************** * * Here are the routines that actually * * interface with the rest of the system * * ********************************************************************** */ static int sci_open(struct tty_struct * tty, struct file * filp) { struct sci_port *port; int retval = 0, line; line = MINOR(tty->device) - SCI_MINOR_START; if ((line < 0) || (line >= SCI_NPORTS)) return -ENODEV; port = &sci_ports[line]; #if defined(CONFIG_CPU_SUBTYPE_SH5_101) || defined(CONFIG_CPU_SUBTYPE_SH5_103) if (port->base == 0) { port->base = onchip_remap(SCIF_ADDR_SH5, 1024, "SCIF"); if (!port->base) goto failed_1; } #endif tty->driver_data = port; port->gs.tty = tty; port->gs.count++; port->event = 0; port->tqueue.routine = do_softint; port->tqueue.data = port; port->break_flag = 0; if (port->gs.count == 1) { MOD_INC_USE_COUNT; retval = sci_request_irq(port); if (retval) { goto failed_1; } } /* * Start up serial port */ retval = gs_init_port(&port->gs); if (retval) { goto failed_2; } port->gs.flags |= GS_ACTIVE; sci_setsignals(port, 1,1); retval = gs_block_til_ready(port, filp); if (retval) { goto failed_2; } if ((port->gs.count == 1) && (port->gs.flags & ASYNC_SPLIT_TERMIOS)) { if (tty->driver.subtype == SERIAL_TYPE_NORMAL) *tty->termios = port->gs.normal_termios; else *tty->termios = port->gs.callout_termios; sci_set_real_termios(port); } #ifdef CONFIG_SERIAL_CONSOLE if (sercons.cflag && sercons.index == line) { tty->termios->c_cflag = sercons.cflag; port->gs.baud = sercons_baud; sercons.cflag = 0; sci_set_real_termios(port); } #endif #ifdef CONFIG_SH_KGDB_CONSOLE if (kgdbcons.cflag && kgdbcons.index == line) { tty->termios->c_cflag = kgdbcons.cflag; port->gs.baud = kgdb_baud; sercons.cflag = 0; sci_set_real_termios(port); } #elif CONFIG_SH_KGDB /* Even for non-console, may defer to kgdb */ if (port == kgdb_sci_port && kgdb_in_gdb_mode) { tty->termios->c_cflag = kgdb_cflag; port->gs.baud = kgdb_baud; sercons.cflag = 0; sci_set_real_termios(port); } #endif /* CONFIG_SH_KGDB */ sci_enable_rx_interrupts(port); port->gs.session = current->session; port->gs.pgrp = current->pgrp; return 0; failed_2: sci_free_irq(port); failed_1: MOD_DEC_USE_COUNT; port->gs.count--; return retval; } static void sci_hungup(void *ptr) { MOD_DEC_USE_COUNT; } static void sci_close(void *ptr) { MOD_DEC_USE_COUNT; } static int sci_ioctl(struct tty_struct * tty, struct file * filp, unsigned int cmd, unsigned long arg) { int rc; struct sci_port *port = tty->driver_data; int ival; rc = 0; switch (cmd) { case TIOCGSOFTCAR: rc = put_user(((tty->termios->c_cflag & CLOCAL) ? 1 : 0), (unsigned int *) arg); break; case TIOCSSOFTCAR: if ((rc = get_user(ival, (unsigned int *) arg)) == 0) tty->termios->c_cflag = (tty->termios->c_cflag & ~CLOCAL) | (ival ? CLOCAL : 0); break; case TIOCGSERIAL: if ((rc = verify_area(VERIFY_WRITE, (void *) arg, sizeof(struct serial_struct))) == 0) rc = gs_getserial(&port->gs, (struct serial_struct *) arg); break; case TIOCSSERIAL: if ((rc = verify_area(VERIFY_READ, (void *) arg, sizeof(struct serial_struct))) == 0) rc = gs_setserial(&port->gs, (struct serial_struct *) arg); break; case TIOCMGET: ival = sci_getsignals(port); rc = put_user(ival, (unsigned int *) arg); break; case TIOCMBIS: if ((rc = get_user(ival, (unsigned int *) arg)) == 0) sci_setsignals(port, ((ival & TIOCM_DTR) ? 1 : -1), ((ival & TIOCM_RTS) ? 1 : -1)); break; case TIOCMBIC: if ((rc = get_user(ival, (unsigned int *) arg)) == 0) sci_setsignals(port, ((ival & TIOCM_DTR) ? 0 : -1), ((ival & TIOCM_RTS) ? 0 : -1)); break; case TIOCMSET: if ((rc = get_user(ival, (unsigned int *)arg)) == 0) sci_setsignals(port, ((ival & TIOCM_DTR) ? 1 : 0), ((ival & TIOCM_RTS) ? 1 : 0)); break; default: rc = -ENOIOCTLCMD; break; } return rc; } static void sci_throttle(struct tty_struct * tty) { struct sci_port *port = (struct sci_port *)tty->driver_data; /* If the port is using any type of input flow * control then throttle the port. */ if ((tty->termios->c_cflag & CRTSCTS) || (I_IXOFF(tty)) ) port->gs.flags |= SCI_RX_THROTTLE; } static void sci_unthrottle(struct tty_struct * tty) { struct sci_port *port = (struct sci_port *)tty->driver_data; /* Always unthrottle even if flow control is not enabled on * this port in case we disabled flow control while the port * was throttled */ port->gs.flags &= ~SCI_RX_THROTTLE; sci_enable_rx_interrupts(port); return; } #ifdef CONFIG_PROC_FS static int sci_read_proc(char *page, char **start, off_t off, int count, int *eof, void *data) { int i; struct sci_port *port; int len = 0; len += sprintf(page, "sciinfo:0.1\n"); for (i = 0; i < SCI_NPORTS && len < 4000; i++) { port = &sci_ports[i]; len += sprintf(page+len, "%d: uart:%s address: %08x", i, (port->type == PORT_SCI) ? "SCI" : "SCIF", port->base); len += sprintf(page+len, " baud:%d", port->gs.baud); len += sprintf(page+len, " tx:%d rx:%d", port->icount.tx, port->icount.rx); if (port->icount.frame) len += sprintf(page+len, " fe:%d", port->icount.frame); if (port->icount.parity) len += sprintf(page+len, " pe:%d", port->icount.parity); if (port->icount.brk) len += sprintf(page+len, " brk:%d", port->icount.brk); if (port->icount.overrun) len += sprintf(page+len, " oe:%d", port->icount.overrun); len += sprintf(page+len, "\n"); } return len; } #endif /* ********************************************************************** * * Here are the initialization routines. * * ********************************************************************** */ static int sci_init_drivers(void) { int error; struct sci_port *port; memset(&sci_driver, 0, sizeof(sci_driver)); sci_driver.magic = TTY_DRIVER_MAGIC; sci_driver.driver_name = "sci"; #ifdef CONFIG_DEVFS_FS sci_driver.name = "ttsc/%d"; #else sci_driver.name = "ttySC"; #endif sci_driver.major = SCI_MAJOR; sci_driver.minor_start = SCI_MINOR_START; sci_driver.num = SCI_NPORTS; sci_driver.type = TTY_DRIVER_TYPE_SERIAL; sci_driver.subtype = SERIAL_TYPE_NORMAL; sci_driver.init_termios = tty_std_termios; sci_driver.init_termios.c_cflag = B9600 | CS8 | CREAD | HUPCL | CLOCAL | CRTSCTS; sci_driver.flags = TTY_DRIVER_REAL_RAW; sci_driver.refcount = &sci_refcount; sci_driver.table = sci_table; sci_driver.termios = sci_termios; sci_driver.termios_locked = sci_termios_locked; sci_driver.open = sci_open; sci_driver.close = gs_close; sci_driver.write = gs_write; sci_driver.put_char = gs_put_char; sci_driver.flush_chars = gs_flush_chars; sci_driver.write_room = gs_write_room; sci_driver.chars_in_buffer = gs_chars_in_buffer; sci_driver.flush_buffer = gs_flush_buffer; sci_driver.ioctl = sci_ioctl; sci_driver.throttle = sci_throttle; sci_driver.unthrottle = sci_unthrottle; sci_driver.set_termios = gs_set_termios; sci_driver.stop = gs_stop; sci_driver.start = gs_start; sci_driver.hangup = gs_hangup; #ifdef CONFIG_PROC_FS sci_driver.read_proc = sci_read_proc; #endif sci_callout_driver = sci_driver; #ifdef CONFIG_DEVFS_FS sci_callout_driver.name = "cusc/%d"; #else sci_callout_driver.name = "cusc"; #endif sci_callout_driver.major = SCI_MAJOR+1; sci_callout_driver.subtype = SERIAL_TYPE_CALLOUT; sci_callout_driver.read_proc = NULL; if ((error = tty_register_driver(&sci_driver))) { printk(KERN_ERR "sci: Couldn't register SCI driver, error = %d\n", error); return 1; } if ((error = tty_register_driver(&sci_callout_driver))) { tty_unregister_driver(&sci_driver); printk(KERN_ERR "sci: Couldn't register SCI callout driver, error = %d\n", error); return 1; } for (port = &sci_ports[0]; port < &sci_ports[SCI_NPORTS]; port++) { port->gs.callout_termios = sci_callout_driver.init_termios; port->gs.normal_termios = sci_driver.init_termios; port->gs.magic = SCI_MAGIC; port->gs.close_delay = HZ/2; port->gs.closing_wait = 30 * HZ; port->gs.rd = &sci_real_driver; init_waitqueue_head(&port->gs.open_wait); init_waitqueue_head(&port->gs.close_wait); port->old_cflag = 0; port->icount.cts = port->icount.dsr = port->icount.rng = port->icount.dcd = 0; port->icount.rx = port->icount.tx = 0; port->icount.frame = port->icount.parity = 0; port->icount.overrun = port->icount.brk = 0; } return 0; } static int sci_request_irq(struct sci_port *port) { int i; void (*handlers[4])(int irq, void *ptr, struct pt_regs *regs) = { sci_er_interrupt, sci_rx_interrupt, sci_tx_interrupt, sci_br_interrupt, }; if(port->irqs[0] == port->irqs[1]){ if (!port->irqs[0]){ printk(KERN_ERR "sci: Cannot allocate irq.(IRQ=0)\n"); return -ENODEV; } if (request_irq(port->irqs[0], sci_mpxed_interrupt, SA_INTERRUPT, "sci", port)) { printk(KERN_ERR "sci: Cannot allocate irq.\n"); return -ENODEV; } } else{ for (i=0; i<4; i++) { if (!port->irqs[i]) continue; if (request_irq(port->irqs[i], handlers[i], SA_INTERRUPT, "sci", port)) { printk(KERN_ERR "sci: Cannot allocate irq.\n"); return -ENODEV; } } } return 0; } static void sci_free_irq(struct sci_port *port) { int i; if(port->irqs[0] == port->irqs[1]){ if(!port->irqs[0]){ printk("sci: sci_free_irq error\n"); }else{ free_irq(port->irqs[0], port); } }else{ for (i=0; i<4; i++) { if (!port->irqs[i]) continue; free_irq(port->irqs[i], port); } } } static char banner[] __initdata = KERN_INFO "SuperH SCI(F) driver initialized\n"; int __init sci_init(void) { struct sci_port *port; int j; printk("%s", banner); for (j=0; j<SCI_NPORTS; j++) { port = &sci_ports[j]; printk(KERN_INFO "ttySC%d at 0x%08x is a %s\n", j, port->base, (port->type == PORT_SCI) ? "SCI" : "SCIF"); } #if defined(CONFIG_SH_SECUREEDGE5410) init_timer(&sci_timer_struct); sci_timer_struct.function = sci_timer; sci_timer_struct.data = 0; sci_timer_struct.expires = jiffies + HZ/25; add_timer(&sci_timer_struct); j = SECUREEDGE_READ_IOPORT(); sci_dcdstatus[0] = !(j & 0x10); sci_dcdstatus[1] = !(j & 0x1); #endif sci_init_drivers(); #ifdef CONFIG_SH_STANDARD_BIOS sh_bios_gdb_detach(); #endif return 0; /* Return -EIO when not detected */ } module_init(sci_init); #ifdef MODULE #undef func_enter #undef func_exit void cleanup_module(void) { #if defined(CONFIG_SH_SECUREEDGE5410) del_timer(&sci_timer_struct); #endif tty_unregister_driver(&sci_driver); tty_unregister_driver(&sci_callout_driver); } #include "generic_serial.c" #endif #ifdef CONFIG_SERIAL_CONSOLE /* * Print a string to the serial port trying not to disturb * any possible real use of the port... */ static void serial_console_write(struct console *co, const char *s, unsigned count) { put_string(sercons_port, s, count); } static kdev_t serial_console_device(struct console *c) { return MKDEV(SCI_MAJOR, SCI_MINOR_START + c->index); } /* * Setup initial baud/bits/parity. We do two things here: * - construct a cflag setting for the first rs_open() * - initialize the serial port * Return non-zero if we didn't find a serial port. */ static int __init serial_console_setup(struct console *co, char *options) { int baud = 9600; int bits = 8; int parity = 'n'; int cflag = CREAD | HUPCL | CLOCAL; char *s; sercons_port = &sci_ports[co->index]; #if defined(CONFIG_CPU_SUBTYPE_SH5_101) || defined(CONFIG_CPU_SUBTYPE_SH5_103) sercons_port->base = onchip_remap(SCIF_ADDR_SH5, 1024, "SCIF"); if (!sercons_port->base) return -EINVAL; #endif if (options) { baud = simple_strtoul(options, NULL, 10); s = options; while(*s >= '0' && *s <= '9') s++; if (*s) parity = *s++; if (*s) bits = *s - '0'; } /* * Now construct a cflag setting. */ switch (baud) { case 19200: cflag |= B19200; break; case 38400: cflag |= B38400; break; case 57600: cflag |= B57600; break; case 115200: cflag |= B115200; break; case 230400: cflag |= B230400; break; case 9600: default: cflag |= B9600; baud = 9600; break; } switch (bits) { case 7: cflag |= CS7; break; default: case 8: cflag |= CS8; break; } switch (parity) { case 'o': case 'O': cflag |= PARODD; break; case 'e': case 'E': cflag |= PARENB; break; } #ifdef CONFIG_SH_KGDB if (kgdb_in_gdb_mode && sercons_port == kgdb_sci_port) { co->cflag = kgdb_cflag; sercons_baud = kgdb_baud; sercons_port->old_cflag = cflag; } else #endif /* CONFIG_SH_KGDB */ { co->cflag = cflag; sercons_baud = baud; sci_set_termios_cflag(sercons_port, cflag, baud); sercons_port->old_cflag = cflag; } return 0; } static struct console sercons = { name: "ttySC", write: serial_console_write, device: serial_console_device, setup: serial_console_setup, flags: CON_PRINTBUFFER, index: -1, }; /* * Register console. */ #ifdef CONFIG_SH_EARLY_PRINTK extern void sh_console_unregister (void); #endif void __init sci_console_init(void) { register_console(&sercons); #ifdef CONFIG_SH_EARLY_PRINTK /* Now that the real console is available, unregister the one we * used while first booting. */ sh_console_unregister(); #endif } #endif /* CONFIG_SERIAL_CONSOLE */ #ifdef CONFIG_SH_KGDB /* Initialise the KGDB serial port */ int kgdb_sci_setup(void) { int cflag = CREAD | HUPCL | CLOCAL; if ((kgdb_portnum < 0) || (kgdb_portnum >= SCI_NPORTS)) return -1; kgdb_sci_port = &sci_ports[kgdb_portnum]; switch (kgdb_baud) { case 115200: cflag |= B115200; break; case 57600: cflag |= B57600; break; case 38400: cflag |= B38400; break; case 19200: cflag |= B19200; break; case 9600: default: cflag |= B9600; kgdb_baud = 9600; break; } switch (kgdb_bits) { case '7': cflag |= CS7; break; default: case '8': cflag |= CS8; break; } switch (kgdb_parity) { case 'O': cflag |= PARODD; break; case 'E': cflag |= PARENB; break; } kgdb_cflag = cflag; sci_set_termios_cflag(kgdb_sci_port, kgdb_cflag, kgdb_baud); /* Set up the interrupt for BREAK from GDB */ /* Commented out for now since it may not be possible yet... request_irq(kgdb_sci_port->irqs[0], kgdb_break_interrupt, SA_INTERRUPT, "sci", kgdb_sci_port); sci_enable_rx_interrupts(kgdb_sci_port); */ /* Setup complete: initialize function pointers */ kgdb_getchar = kgdb_sci_getchar; kgdb_putchar = kgdb_sci_putchar; return 0; } #ifdef CONFIG_SH_KGDB_CONSOLE /* Create a console device */ static kdev_t kgdb_console_device(struct console *c) { return MKDEV(SCI_MAJOR, SCI_MINOR_START + c->index); } /* Set up the KGDB console */ static int __init kgdb_console_setup(struct console *co, char *options) { /* NB we ignore 'options' because we've already done the setup */ co->cflag = kgdb_cflag; return 0; } /* Register the KGDB console so we get messages (d'oh!) */ void __init kgdb_console_init(void) { register_console(&kgdbcons); } /* The console structure for KGDB */ static struct console kgdbcons = { name:"ttySC", write:kgdb_console_write, device:kgdb_console_device, wait_key:serial_console_wait_key, setup:kgdb_console_setup, flags:CON_PRINTBUFFER | CON_ENABLED, index:-1, }; #endif /* CONFIG_SH_KGDB_CONSOLE */ #endif /* CONFIG_SH_KGDB */
Go to most recent revision | Compare with Previous | Blame | View Log