URL
https://opencores.org/ocsvn/or1k/or1k/trunk
Subversion Repositories or1k
[/] [or1k/] [trunk/] [linux/] [linux-2.4/] [drivers/] [char/] [sh-sci.h] - Rev 1774
Go to most recent revision | Compare with Previous | Blame | View Log
/* $Id: sh-sci.h,v 1.1.1.1 2004-04-15 01:58:43 phoenix Exp $ * * linux/drivers/char/sh-sci.h * * SuperH on-chip serial module support. (SCI with no FIFO / with FIFO) * Copyright (C) 1999, 2000 Niibe Yutaka * Copyright (C) 2000 Greg Banks * Modified to support multiple serial ports. Stuart Menefy (May 2000). * Modified to support SH7300(SH-Mobile) SCIF. Takashi Kusuda (Jun 2003). * */ #include <linux/config.h> /* Values for sci_port->type */ #define PORT_SCI 0 #define PORT_SCIF 1 #define PORT_IRDA 1 /* XXX: temporary assignment */ /* Offsets into the sci_port->irqs array */ #define SCIx_ERI_IRQ 0 #define SCIx_RXI_IRQ 1 #define SCIx_TXI_IRQ 2 /* ERI, RXI, TXI, BRI */ #define SCI_IRQS { 23, 24, 25, 0 } #define SH3_SCIF_IRQS { 56, 57, 59, 58 } #define SH3_IRDA_IRQS { 52, 53, 55, 54 } #define SH4_SCIF_IRQS { 40, 41, 43, 42 } #define STB1_SCIF1_IRQS {23, 24, 26, 25 } #define SH5_SCIF_IRQS { 39, 40, 42 } #define SH7300_SCIF0_IRQS {80, 80, 80, 80 } #if defined(CONFIG_CPU_SUBTYPE_SH7708) # define SCI_NPORTS 1 # define SCI_INIT { \ { {}, PORT_SCI, 0xfffffe80, SCI_IRQS, sci_init_pins_sci } \ } # define SCSPTR 0xffffff7c /* 8 bit */ # define SCSCR_INIT(port) 0x30 /* TIE=0,RIE=0,TE=1,RE=1 */ # define SCI_ONLY #elif defined(CONFIG_CPU_SUBTYPE_SH7300) # define SCI_NPORTS 1 # define SCI_INIT { \ { {}, PORT_SCIF, 0xA4430000, SH7300_SCIF0_IRQS, sci_init_pins_scif }, \ } # define SCPCR 0xA4050116 /* 16 bit SCIF */ # define SCPDR 0xA4050136 /* 16 bit SCIF */ # define SCSCR_INIT(port) 0x0030 /* TIE=0,RIE=0,TE=1,RE=1 */ # define SCIF_ONLY #elif defined(CONFIG_CPU_SUBTYPE_SH7707) || defined(CONFIG_CPU_SUBTYPE_SH7709) # define SCI_NPORTS 3 # define SCI_INIT { \ { {}, PORT_SCI, 0xfffffe80, SCI_IRQS, sci_init_pins_sci }, \ { {}, PORT_SCIF, 0xA4000150, SH3_SCIF_IRQS, sci_init_pins_scif }, \ { {}, PORT_SCIF, 0xA4000140, SH3_IRDA_IRQS, sci_init_pins_irda } \ } # define SCPCR 0xA4000116 /* 16 bit SCI and SCIF */ # define SCPDR 0xA4000136 /* 8 bit SCI and SCIF */ # define SCSCR_INIT(port) 0x30 /* TIE=0,RIE=0,TE=1,RE=1 */ # define SCI_AND_SCIF #elif defined(CONFIG_CPU_SUBTYPE_SH7750) || defined(CONFIG_CPU_SUBTYPE_SH7751) # define SCI_NPORTS 2 # define SCI_INIT { \ { {}, PORT_SCI, 0xffe00000, SCI_IRQS, sci_init_pins_sci }, \ { {}, PORT_SCIF, 0xFFE80000, SH4_SCIF_IRQS, sci_init_pins_scif } \ } # define SCSPTR1 0xffe0001c /* 8 bit SCI */ # define SCSPTR2 0xFFE80020 /* 16 bit SCIF */ # define SCIF_ORER 0x0001 /* overrun error bit */ # define SCSCR_INIT(port) (((port)->type == PORT_SCI) ? \ 0x30 /* TIE=0,RIE=0,TE=1,RE=1 */ : \ 0x38 /* TIE=0,RIE=0,TE=1,RE=1,REIE=1 */ ) # define SCI_AND_SCIF #elif defined(CONFIG_CPU_SUBTYPE_SH4_202) # define SCI_NPORTS 1 # define SCI_INIT { \ { {}, PORT_SCIF, 0xFFE80000, SH4_SCIF_IRQS, sci_init_pins_scif } \ } # define SCSPTR2 0xFFE80020 /* 16 bit SCIF */ # define SCIF_ORER 0x0001 /* overrun error bit */ # define SCSCR_INIT(port) 0x38 /* TIE=0,RIE=0,TE=1,RE=1,REIE=1 */ # define SCIF_ONLY #elif defined(CONFIG_CPU_SUBTYPE_ST40) # define SCI_NPORTS 2 # define SCI_INIT { \ { {}, PORT_SCIF, 0xffe00000, STB1_SCIF1_IRQS, sci_init_pins_scif }, \ { {}, PORT_SCIF, 0xffe80000, SH4_SCIF_IRQS, sci_init_pins_scif } \ } # define SCSPTR1 0xffe00020 /* 16 bit SCIF */ # define SCSPTR2 0xffe80020 /* 16 bit SCIF */ # define SCIF_ORER 0x0001 /* overrun error bit */ # define SCSCR_INIT(port) 0x38 /* TIE=0,RIE=0,TE=1,RE=1,REIE=1 */ # define SCIF_ONLY #elif defined(CONFIG_CPU_SUBTYPE_SH5_101) || defined(CONFIG_CPU_SUBTYPE_SH5_103) # include <asm/hardware.h> # define SCIF_BASE_ADDR 0x01030000 # define SCIF_ADDR_SH5 PHYS_PERIPHERAL_BLOCK+SCIF_BASE_ADDR # define SCIF_PTR2_OFFS 0x0000020 # define SCIF_LSR2_OFFS 0x0000024 # define SCI_NPORTS 1 # define SCI_INIT { \ { {}, PORT_SCIF, 0, \ SH5_SCIF_IRQS, sci_init_pins_scif } \ } # define SCSPTR2 (SCIF_ADDR_SH5+SCIF_PTR2_OFFS) /* 16 bit SCIF */ # define SCLSR2 (SCIF_ADDR_SH5+SCIF_LSR2_OFFS) /* 16 bit SCIF */ # define SCSCR_INIT(port) 0x38 /* TIE=0,RIE=0, TE=1,RE=1,REIE=1 */ # define SCIF_ONLY #else # error CPU subtype not defined #endif /* SCSCR */ #define SCI_CTRL_FLAGS_TIE 0x80 /* all */ #define SCI_CTRL_FLAGS_RIE 0x40 /* all */ #define SCI_CTRL_FLAGS_TE 0x20 /* all */ #define SCI_CTRL_FLAGS_RE 0x10 /* all */ /* SCI_CTRL_FLAGS_REIE 0x08 * 7750 SCIF */ /* SCI_CTRL_FLAGS_MPIE 0x08 * 7707 SCI, 7708 SCI, 7709 SCI, 7750 SCI */ /* SCI_CTRL_FLAGS_TEIE 0x04 * 7707 SCI, 7708 SCI, 7709 SCI, 7750 SCI */ /* SCI_CTRL_FLAGS_CKE1 0x02 * all */ /* SCI_CTRL_FLAGS_CKE0 0x01 * 7707 SCI/SCIF, 7708 SCI, 7709 SCI/SCIF, 7750 SCI */ /* SCxSR SCI */ #define SCI_TDRE 0x80 /* 7707 SCI, 7708 SCI, 7709 SCI, 7750 SCI */ #define SCI_RDRF 0x40 /* 7707 SCI, 7708 SCI, 7709 SCI, 7750 SCI */ #define SCI_ORER 0x20 /* 7707 SCI, 7708 SCI, 7709 SCI, 7750 SCI */ #define SCI_FER 0x10 /* 7707 SCI, 7708 SCI, 7709 SCI, 7750 SCI */ #define SCI_PER 0x08 /* 7707 SCI, 7708 SCI, 7709 SCI, 7750 SCI */ #define SCI_TEND 0x04 /* 7707 SCI, 7708 SCI, 7709 SCI, 7750 SCI */ /* SCI_MPB 0x02 * 7707 SCI, 7708 SCI, 7709 SCI, 7750 SCI */ /* SCI_MPBT 0x01 * 7707 SCI, 7708 SCI, 7709 SCI, 7750 SCI */ #define SCI_ERRORS ( SCI_PER | SCI_FER | SCI_ORER) /* SCxSR SCIF */ #define SCIF_ER 0x0080 /* 7707 SCIF, 7709 SCIF, 7750 SCIF */ #define SCIF_TEND 0x0040 /* 7707 SCIF, 7709 SCIF, 7750 SCIF */ #define SCIF_TDFE 0x0020 /* 7707 SCIF, 7709 SCIF, 7750 SCIF */ #define SCIF_BRK 0x0010 /* 7707 SCIF, 7709 SCIF, 7750 SCIF */ #define SCIF_FER 0x0008 /* 7707 SCIF, 7709 SCIF, 7750 SCIF */ #define SCIF_PER 0x0004 /* 7707 SCIF, 7709 SCIF, 7750 SCIF */ #define SCIF_RDF 0x0002 /* 7707 SCIF, 7709 SCIF, 7750 SCIF */ #define SCIF_DR 0x0001 /* 7707 SCIF, 7709 SCIF, 7750 SCIF */ #if defined(CONFIG_CPU_SUBTYPE_SH7300) #define SCIF_ORER 0x0200 #define SCIF_ERRORS ( SCIF_PER | SCIF_FER | SCIF_ER | SCIF_BRK | SCIF_ORER) #else #define SCIF_ERRORS ( SCIF_PER | SCIF_FER | SCIF_ER | SCIF_BRK) #endif #if defined(SCI_ONLY) # define SCxSR_TEND(port) SCI_TEND # define SCxSR_ERRORS(port) SCI_ERRORS # define SCxSR_RDxF(port) SCI_RDRF # define SCxSR_TDxE(port) SCI_TDRE # define SCxSR_ORER(port) SCI_ORER # define SCxSR_FER(port) SCI_FER # define SCxSR_PER(port) SCI_PER # define SCxSR_BRK(port) 0x00 # define SCxSR_RDxF_CLEAR(port) 0xbc # define SCxSR_ERROR_CLEAR(port) 0xc4 # define SCxSR_TDxE_CLEAR(port) 0x78 # define SCxSR_BREAK_CLEAR(port) 0xc4 #elif defined(SCIF_ONLY) # define SCxSR_TEND(port) SCIF_TEND # define SCxSR_ERRORS(port) SCIF_ERRORS # define SCxSR_RDxF(port) SCIF_RDF # define SCxSR_TDxE(port) SCIF_TDFE #if defined(CONFIG_CPU_SUBTYPE_SH7300) # define SCxSR_ORER(port) SCIF_ORER #else # define SCxSR_ORER(port) 0x0000 #endif # define SCxSR_FER(port) SCIF_FER # define SCxSR_PER(port) SCIF_PER # define SCxSR_BRK(port) SCIF_BRK #if defined(CONFIG_CPU_SUBTYPE_SH7300) # define SCxSR_RDxF_CLEAR(port) (sci_in(port,SCxSR)&0xfffc) # define SCxSR_ERROR_CLEAR(port) (sci_in(port,SCxSR)&0xfd73) # define SCxSR_TDxE_CLEAR(port) (sci_in(port,SCxSR)&0xffdf) # define SCxSR_BREAK_CLEAR(port) (sci_in(port,SCxSR)&0xffe3) #else # define SCxSR_RDxF_CLEAR(port) 0x00fc # define SCxSR_ERROR_CLEAR(port) 0x0073 # define SCxSR_TDxE_CLEAR(port) 0x00df # define SCxSR_BREAK_CLEAR(port) 0x00e3 #endif #else # define SCxSR_TEND(port) (((port)->type == PORT_SCI) ? SCI_TEND : SCIF_TEND) # define SCxSR_ERRORS(port) (((port)->type == PORT_SCI) ? SCI_ERRORS : SCIF_ERRORS) # define SCxSR_RDxF(port) (((port)->type == PORT_SCI) ? SCI_RDRF : SCIF_RDF) # define SCxSR_TDxE(port) (((port)->type == PORT_SCI) ? SCI_TDRE : SCIF_TDFE) # define SCxSR_ORER(port) (((port)->type == PORT_SCI) ? SCI_ORER : 0x0000) # define SCxSR_FER(port) (((port)->type == PORT_SCI) ? SCI_FER : SCIF_FER) # define SCxSR_PER(port) (((port)->type == PORT_SCI) ? SCI_PER : SCIF_PER) # define SCxSR_BRK(port) (((port)->type == PORT_SCI) ? 0x00 : SCIF_BRK) # define SCxSR_RDxF_CLEAR(port) (((port)->type == PORT_SCI) ? 0xbc : 0x00fc) # define SCxSR_ERROR_CLEAR(port) (((port)->type == PORT_SCI) ? 0xc4 : 0x0073) # define SCxSR_TDxE_CLEAR(port) (((port)->type == PORT_SCI) ? 0x78 : 0x00df) # define SCxSR_BREAK_CLEAR(port) (((port)->type == PORT_SCI) ? 0xc4 : 0x00e3) #endif /* SCFCR */ #define SCFCR_RFRST 0x0002 #define SCFCR_TFRST 0x0004 #define SCFCR_TCRST 0x4000 #define SCFCR_MCE 0x0008 #define SCI_MAJOR 204 #define SCI_MINOR_START 8 /* Generic serial flags */ #define SCI_RX_THROTTLE 0x0000001 #define SCI_MAGIC 0xbabeface /* * Events are used to schedule things to happen at timer-interrupt * time, instead of at rs interrupt time. */ #define SCI_EVENT_WRITE_WAKEUP 0 struct sci_port { struct gs_port gs; int type; unsigned int base; unsigned char irqs[4]; /* ERI, RXI, TXI, BRI */ void (*init_pins)(struct sci_port* port, unsigned int cflag); unsigned int old_cflag; struct async_icount icount; struct tq_struct tqueue; unsigned long event; int break_flag; }; #define SCI_IN(size, offset) \ unsigned int addr = port->base + (offset); \ if ((size) == 8) { \ return ctrl_inb(addr); \ } else { \ return ctrl_inw(addr); \ } #define SCI_OUT(size, offset, value) \ unsigned int addr = port->base + (offset); \ if ((size) == 8) { \ ctrl_outb(value, addr); \ } else { \ ctrl_outw(value, addr); \ } #define CPU_SCIx_FNS(name, sci_offset, sci_size, scif_offset, scif_size)\ static inline unsigned int sci_##name##_in(struct sci_port* port) \ { \ if (port->type == PORT_SCI) { \ SCI_IN(sci_size, sci_offset) \ } else { \ SCI_IN(scif_size, scif_offset); \ } \ } \ static inline void sci_##name##_out(struct sci_port* port, unsigned int value) \ { \ if (port->type == PORT_SCI) { \ SCI_OUT(sci_size, sci_offset, value) \ } else { \ SCI_OUT(scif_size, scif_offset, value); \ } \ } #define CPU_SCIF_FNS(name, scif_offset, scif_size) \ static inline unsigned int sci_##name##_in(struct sci_port* port) \ { \ SCI_IN(scif_size, scif_offset); \ } \ static inline void sci_##name##_out(struct sci_port* port, unsigned int value) \ { \ SCI_OUT(scif_size, scif_offset, value); \ } #ifdef __sh3__ #if defined(CONFIG_CPU_SUBTYPE_SH7300) #define SCIF_FNS(name, scif_offset, scif_size) \ CPU_SCIF_FNS(name, scif_offset, scif_size) #else #define SCIx_FNS(name, sh3_sci_offset, sh3_sci_size, sh4_sci_offset, sh4_sci_size, \ sh3_scif_offset, sh3_scif_size, sh4_scif_offset, sh4_scif_size) \ CPU_SCIx_FNS(name, sh3_sci_offset, sh3_sci_size, sh3_scif_offset, sh3_scif_size) #define SCIF_FNS(name, sh3_scif_offset, sh3_scif_size, sh4_scif_offset, sh4_scif_size) \ CPU_SCIF_FNS(name, sh3_scif_offset, sh3_scif_size) #endif #else #define SCIx_FNS(name, sh3_sci_offset, sh3_sci_size, sh4_sci_offset, sh4_sci_size, \ sh3_scif_offset, sh3_scif_size, sh4_scif_offset, sh4_scif_size) \ CPU_SCIx_FNS(name, sh4_sci_offset, sh4_sci_size, sh4_scif_offset, sh4_scif_size) #define SCIF_FNS(name, sh3_scif_offset, sh3_scif_size, sh4_scif_offset, sh4_scif_size) \ CPU_SCIF_FNS(name, sh4_scif_offset, sh4_scif_size) #endif #if defined(CONFIG_CPU_SUBTYPE_SH7300) SCIF_FNS(SCSMR, 0x00, 16) SCIF_FNS(SCBRR, 0x04, 8) SCIF_FNS(SCSCR, 0x08, 16) SCIF_FNS(SCTDSR, 0x0c, 8) SCIF_FNS(SCFER, 0x10, 16) SCIF_FNS(SCxSR, 0x14, 16) SCIF_FNS(SCFCR, 0x18, 16) SCIF_FNS(SCFDR, 0x1c, 16) SCIF_FNS(SCxTDR, 0x20, 8) SCIF_FNS(SCxRDR, 0x24, 8) #else /* reg SCI/SH3 SCI/SH4 SCIF/SH3 SCIF/SH4 */ /* name off sz off sz off sz off sz */ SCIx_FNS(SCSMR, 0x00, 8, 0x00, 8, 0x00, 8, 0x00, 16) SCIx_FNS(SCBRR, 0x02, 8, 0x04, 8, 0x02, 8, 0x04, 8) SCIx_FNS(SCSCR, 0x04, 8, 0x08, 8, 0x04, 8, 0x08, 16) SCIx_FNS(SCxTDR, 0x06, 8, 0x0c, 8, 0x06, 8, 0x0C, 8) SCIx_FNS(SCxSR, 0x08, 8, 0x10, 8, 0x08, 16, 0x10, 16) SCIx_FNS(SCxRDR, 0x0a, 8, 0x14, 8, 0x0A, 8, 0x14, 8) SCIF_FNS(SCFCR, 0x0c, 8, 0x18, 16) SCIF_FNS(SCFDR, 0x0e, 16, 0x1C, 16) SCIF_FNS(SCSPTR, 0, 0, 0x20, 16) SCIF_FNS(SCLSR, 0, 0, 0x24, 16) #endif #define sci_in(port, reg) sci_##reg##_in(port) #define sci_out(port, reg, value) sci_##reg##_out(port, value) #if defined(CONFIG_CPU_SUBTYPE_SH7708) static inline int sci_rxd_in(struct sci_port *port) { if (port->base == 0xfffffe80) return ctrl_inb(SCSPTR)&0x01 ? 1 : 0; /* SCI */ return 1; } #elif defined(CONFIG_CPU_SUBTYPE_SH7300) static inline int sci_rxd_in(struct sci_port *port) { if (port->base == 0xa4430000) return ctrl_inb(SCPDR)&0x01 ? 1 : 0; /* SCIF0 */ return 1; } #elif defined(CONFIG_CPU_SUBTYPE_SH7707) || defined(CONFIG_CPU_SUBTYPE_SH7709) static inline int sci_rxd_in(struct sci_port *port) { if (port->base == 0xfffffe80) return ctrl_inb(SCPDR)&0x01 ? 1 : 0; /* SCI */ if (port->base == 0xa4000150) return ctrl_inb(SCPDR)&0x10 ? 1 : 0; /* SCIF */ if (port->base == 0xa4000140) return ctrl_inb(SCPDR)&0x04 ? 1 : 0; /* IRDA */ return 1; } #elif defined(CONFIG_CPU_SUBTYPE_SH7750) || defined(CONFIG_CPU_SUBTYPE_SH7751) || defined(CONFIG_CPU_SUBTYPE_SH4_202) static inline int sci_rxd_in(struct sci_port *port) { #ifndef SCIF_ONLY if (port->base == 0xffe00000) return ctrl_inb(SCSPTR1)&0x01 ? 1 : 0; /* SCI */ #endif #ifndef SCI_ONLY if (port->base == 0xffe80000) return ctrl_inw(SCSPTR2)&0x0001 ? 1 : 0; /* SCIF */ #endif return 1; } #elif defined(CONFIG_CPU_SUBTYPE_ST40) static inline int sci_rxd_in(struct sci_port *port) { if (port->base == 0xffe00000) return ctrl_inw(SCSPTR1)&0x0001 ? 1 : 0; /* SCIF */ else return ctrl_inw(SCSPTR2)&0x0001 ? 1 : 0; /* SCIF */ } #elif defined(CONFIG_CPU_SUBTYPE_SH5_101) || defined(CONFIG_CPU_SUBTYPE_SH5_103) static inline int sci_rxd_in(struct sci_port *port) { return sci_in(port, SCSPTR)&0x0001 ? 1 : 0; /* SCIF */ } #endif /* * Values for the BitRate Register (SCBRR) * * The values are actually divisors for a frequency which can * be internal to the SH3 (14.7456MHz) or derived from an external * clock source. This driver assumes the internal clock is used; * to support using an external clock source, config options or * possibly command-line options would need to be added. * * Also, to support speeds below 2400 (why?) the lower 2 bits of * the SCSMR register would also need to be set to non-zero values. * * -- Greg Banks 27Feb2000 * * Answer: The SCBRR register is only eight bits, and the value in * it gets larger with lower baud rates. At around 2400 (depending on * the peripherial module clock) you run out of bits. However the * lower two bits of SCSMR allow the module clock to be divided down, * scaling the value which is needed in SCBRR. * * -- Stuart Menefy - 23 May 2000 * * I meant, why would anyone bother with bitrates below 2400. * * -- Greg Banks - 7Jul2000 * * You "speedist"! How will I use my 110bps ASR-33 teletype with paper * tape reader as a console! * * -- Mitch Davis - 15 Jul 2000 */ #define PCLK (current_cpu_data.module_clock) #if defined(CONFIG_CPU_SUBTYPE_SH7300) #define SCBRR_VALUE(bps) ((PCLK+16*bps)/(16*bps)-1) #else #define SCBRR_VALUE(bps) ((PCLK+16*bps)/(32*bps)-1) #endif #define BPS_2400 SCBRR_VALUE(2400) #define BPS_4800 SCBRR_VALUE(4800) #define BPS_9600 SCBRR_VALUE(9600) #define BPS_19200 SCBRR_VALUE(19200) #define BPS_38400 SCBRR_VALUE(38400) #define BPS_57600 SCBRR_VALUE(57600) #define BPS_115200 SCBRR_VALUE(115200) #define BPS_230400 SCBRR_VALUE(230400)
Go to most recent revision | Compare with Previous | Blame | View Log