Subversion Repositories or1k

/* Hey EMACS -*- linux-c -*-
 *
 * tipar - low level driver for handling a parallel link cable designed
 * for Texas Instruments graphing calculators (http://lpg.ticalc.org).
 *
 * Copyright (C) 2000-2002, Romain Lievin <roms@lpg.ticalc.org>
 * under the terms of the GNU General Public License.
 *
 * Various fixes & clean-up from the Linux Kernel Mailing List
 * (Alan Cox, Richard B. Johnson, Christoph Hellwig).
 */
 
/* This driver should, in theory, work with any parallel port that has an
 * appropriate low-level driver; all I/O is done through the parport
 * abstraction layer.
 *
 * If this driver is built into the kernel, you can configure it using the
 * kernel command-line.  For example:
 *
 *      tipar=timeout,delay       (set timeout and delay)
 *
 * If the driver is loaded as a module, similar functionality is available
 * using module parameters.  The equivalent of the above commands would be:
 *
 *      # insmod tipar timeout=15 delay=10
 */
 
/* COMPATIBILITY WITH OLD KERNELS
 *
 * Usually, parallel cables were bound to ports at
 * particular I/O addresses, as follows:
 *
 *      tipar0             0x378
 *      tipar1             0x278
 *      tipar2             0x3bc
 *
 *
 * This driver, by default, binds tipar devices according to parport and
 * the minor number.
 *
 */
 
#include <linux/config.h>
#include <linux/module.h>
#include <linux/version.h>
#include <linux/types.h>
#include <linux/errno.h>
#include <linux/kernel.h>
#include <linux/sched.h>
#include <linux/delay.h>
#include <linux/fcntl.h>
#include <linux/fs.h>
#include <linux/init.h>
#include <asm/uaccess.h>
#include <linux/ioport.h>
#include <asm/io.h>
#include <asm/bitops.h>
#include <linux/devfs_fs_kernel.h>	/* DevFs support */
#include <linux/parport.h>	/* Our code depend on parport */
 
/*
 * TI definitions
 */
#include <linux/ticable.h>
 
/*
 * Version Information
 */
#define DRIVER_VERSION "1.18"
#define DRIVER_AUTHOR  "Romain Lievin <roms@lpg.ticalc.org>"
#define DRIVER_DESC    "Device driver for TI/PC parallel link cables"
#define DRIVER_LICENSE "GPL"
 
#if LINUX_VERSION_CODE < KERNEL_VERSION(2,4,18)
# define minor(x) MINOR(x)
#endif
 
#if LINUX_VERSION_CODE < KERNEL_VERSION(2,5,0)
# define need_resched() (current->need_resched)
#endif
 
/* ----- global variables --------------------------------------------- */
 
struct tipar_struct {
	struct pardevice *dev;	/* Parport device entry */
};
 
#define PP_NO 3
static struct tipar_struct table[PP_NO];
 
static int delay = IO_DELAY;	/* inter-bit delay in microseconds */
static int timeout = TIMAXTIME;	/* timeout in tenth of seconds     */
 
static devfs_handle_t devfs_handle;
static unsigned int tp_count;	/* tipar count */
static unsigned long opened;	/* opened devices */
 
/* --- macros for parport access -------------------------------------- */
 
#define r_dtr(x)        (parport_read_data(table[(x)].dev->port))
#define r_str(x)        (parport_read_status(table[(x)].dev->port))
#define w_ctr(x,y)      (parport_write_control(table[(x)].dev->port, (y)))
#define w_dtr(x,y)      (parport_write_data(table[(x)].dev->port, (y)))
 
/* --- setting states on the D-bus with the right timing: ------------- */
 
static inline void
outbyte(int value, int minor)
{
	w_dtr(minor, value);
}
 
static inline int
inbyte(int minor)
{
	return (r_str(minor));
}
 
static inline void
init_ti_parallel(int minor)
{
	outbyte(3, minor);
}
 
/* ----- global defines ----------------------------------------------- */
 
#define START(x) { x=jiffies+HZ/(timeout/10); }
#define WAIT(x)  { \
  if (time_before((x), jiffies)) return -1; \
  if (need_resched()) schedule(); }
 
/* ----- D-bus bit-banging functions ---------------------------------- */
 
/* D-bus protocol (45kbit/s max):
                    1                 0                      0
       _______        ______|______    __________|________    __________
Red  :        ________      |      ____          |        ____
       _        ____________|________      ______|__________       _____
White:  ________            |        ______      |          _______
*/
 
/* Try to transmit a byte on the specified port (-1 if error). */
static int
put_ti_parallel(int minor, unsigned char data)
{
	int bit;
	unsigned long max;
 
	for (bit = 0; bit < 8; bit++) {
		if (data & 1) {
			outbyte(2, minor);
			START(max);
			do {
				WAIT(max);
			} while (inbyte(minor) & 0x10);
 
			outbyte(3, minor);
			START(max);
			do {
				WAIT(max);
			} while (!(inbyte(minor) & 0x10));
		} else {
			outbyte(1, minor);
			START(max);
			do {
				WAIT(max);
			} while (inbyte(minor) & 0x20);
 
			outbyte(3, minor);
			START(max);
			do {
				WAIT(max);
			} while (!(inbyte(minor) & 0x20));
		}
 
		data >>= 1;
		udelay(delay);
 
		if (need_resched())
			schedule();
	}
 
	return 0;
}
 
/* Receive a byte on the specified port or -1 if error. */
static int
get_ti_parallel(int minor)
{
	int bit;
	unsigned char v, data = 0;
	unsigned long max;
 
	for (bit = 0; bit < 8; bit++) {
		START(max);
		do {
			WAIT(max);
		} while ((v = inbyte(minor) & 0x30) == 0x30);
 
		if (v == 0x10) {
			data = (data >> 1) | 0x80;
			outbyte(1, minor);
			START(max);
			do {
				WAIT(max);
			} while (!(inbyte(minor) & 0x20));
			outbyte(3, minor);
		} else {
			data = data >> 1;
			outbyte(2, minor);
			START(max);
			do {
				WAIT(max);
			} while (!(inbyte(minor) & 0x10));
			outbyte(3, minor);
		}
 
		udelay(delay);
		if (need_resched())
			schedule();
	}
 
	return (int) data;
}
 
/* Try to detect a parallel link cable on the specified port */
static int
probe_ti_parallel(int minor)
{
	int i;
	int seq[] = { 0x00, 0x20, 0x10, 0x30 };
 
	for (i = 3; i >= 0; i--) {
		outbyte(3, minor);
		outbyte(i, minor);
		udelay(delay);
		/*printk(KERN_DEBUG "Probing -> %i: 0x%02x 0x%02x\n", i, data & 0x30, seq[i]); */
		if ((inbyte(minor) & 0x30) != seq[i]) {
			outbyte(3, minor);
			return -1;
		}
	}
 
	outbyte(3, minor);
	return 0;
}
 
/* ----- kernel module functions--------------------------------------- */
 
static int
tipar_open(struct inode *inode, struct file *file)
{
	unsigned int minor = minor(inode->i_rdev) - TIPAR_MINOR;
 
	if (minor > tp_count - 1)
		return -ENXIO;
 
	if (test_and_set_bit(minor, &opened))
		return -EBUSY;
 
	parport_claim_or_block(table[minor].dev);
	init_ti_parallel(minor);
	parport_release(table[minor].dev);
 
	return 0;
}
 
static int
tipar_close(struct inode *inode, struct file *file)
{
	unsigned int minor = minor(inode->i_rdev) - TIPAR_MINOR;
 
	if (minor > tp_count - 1)
		return -ENXIO;
 
	clear_bit(minor, &opened);
 
	return 0;
}
 
static ssize_t
tipar_write(struct file *file, const char *buf, size_t count, loff_t * ppos)
{
	unsigned int minor =
	    minor(file->f_dentry->d_inode->i_rdev) - TIPAR_MINOR;
	ssize_t n;
 
	parport_claim_or_block(table[minor].dev);
 
	for (n = 0; n < count; n++) {
		unsigned char b;
 
		if (get_user(b, buf + n)) {
			n = -EFAULT;
			goto out;
		}
 
		if (put_ti_parallel(minor, b) == -1) {
			init_ti_parallel(minor);
			n = -ETIMEDOUT;
			goto out;
		}
	}
      out:
	parport_release(table[minor].dev);
	return n;
}
 
static ssize_t
tipar_read(struct file *file, char *buf, size_t count, loff_t * ppos)
{
	int b = 0;
	unsigned int minor =
	    minor(file->f_dentry->d_inode->i_rdev) - TIPAR_MINOR;
	ssize_t retval = 0;
	ssize_t n = 0;
 
	if (count == 0)
		return 0;
 
	if (ppos != &file->f_pos)
		return -ESPIPE;
 
	parport_claim_or_block(table[minor].dev);
 
	while (n < count) {
		b = get_ti_parallel(minor);
		if (b == -1) {
			init_ti_parallel(minor);
			retval = -ETIMEDOUT;
			goto out;
		} else {
			if (put_user(b, ((unsigned char *) buf) + n)) {
				retval = -EFAULT;
				break;
			} else
				retval = ++n;
		}
 
		/* Non-blocking mode : try again ! */
		if (file->f_flags & O_NONBLOCK) {
			retval = -EAGAIN;
			goto out;
		}
 
		/* Signal pending, try again ! */
		if (signal_pending(current)) {
			retval = -ERESTARTSYS;
			goto out;
		}
 
		if (need_resched())
			schedule();
	}
 
      out:
	parport_release(table[minor].dev);
	return retval;
}
 
static int
tipar_ioctl(struct inode *inode, struct file *file,
	    unsigned int cmd, unsigned long arg)
{
	int retval = 0;
 
	switch (cmd) {
	case IOCTL_TIPAR_DELAY:
	  delay = (int)arg;    //get_user(delay, &arg);
	  break;
	case IOCTL_TIPAR_TIMEOUT:
	  timeout = (int)arg;  //get_user(timeout, &arg);
	  break;
	default:
		retval = -ENOTTY;
		break;
	}
 
	return retval;
}
 
/* ----- kernel module registering ------------------------------------ */
 
static struct file_operations tipar_fops = {
	owner:THIS_MODULE,
	llseek:no_llseek,
	read:tipar_read,
	write:tipar_write,
	ioctl:tipar_ioctl,
	open:tipar_open,
	release:tipar_close,
};
 
/* --- initialisation code ------------------------------------- */
 
#ifndef MODULE
/*      You must set these - there is no sane way to probe for this cable.
 *      You can use 'tipar=timeout,delay' to set these now. */
static int __init
tipar_setup(char *str)
{
	int ints[2];
 
	str = get_options(str, ARRAY_SIZE(ints), ints);
 
	if (ints[0] > 0) {
		timeout = ints[1];
		if (ints[0] > 1) {
			delay = ints[2];
		}
	}
 
	return 1;
}
#endif
 
/*
 * Register our module into parport.
 * Pass also 2 callbacks functions to parport: a pre-emptive function and an
 * interrupt handler function (unused).
 * Display a message such "tipar0: using parport0 (polling)".
 */
static int
tipar_register(int nr, struct parport *port)
{
	char name[8];
 
	/* Register our module into parport */
	table[nr].dev = parport_register_device(port, "tipar",
						NULL, NULL, NULL, 0,
						(void *) &table[nr]);
 
	if (table[nr].dev == NULL)
		return 1;
 
	/* Use devfs, tree: /dev/ticables/par/[0..2] */
	sprintf(name, "%d", nr);
	printk
	    ("tipar: registering to devfs : major = %d, minor = %d, node = %s\n",
	     TISER_MAJOR, (TIPAR_MINOR + nr), name);
	devfs_register(devfs_handle, name, DEVFS_FL_DEFAULT, TIPAR_MAJOR,
		       TIPAR_MINOR + nr, S_IFCHR | S_IRUGO | S_IWUGO,
		       &tipar_fops, NULL);
 
	/* Display informations */
	printk(KERN_INFO "tipar%d: using %s (%s).\n", nr, port->name,
	       (port->irq ==
		PARPORT_IRQ_NONE) ? "polling" : "interrupt-driven");
 
	if (probe_ti_parallel(nr) != -1)
		printk("tipar%d: link cable found !\n", nr);
	else
		printk("tipar%d: link cable not found.\n", nr);
 
	return 0;
}
 
static void
tipar_attach(struct parport *port)
{
	if (tp_count == PP_NO) {
		printk("tipar: ignoring parallel port (max. %d)\n", PP_NO);
		return;
	}
 
	if (!tipar_register(tp_count, port))
		tp_count++;
}
 
static void
tipar_detach(struct parport *port)
{
	/* Nothing to do */
}
 
static struct parport_driver tipar_driver = {
	"tipar",
	tipar_attach,
	tipar_detach,
	NULL
};
 
int __init
tipar_init_module(void)
{
	printk("tipar: parallel link cable driver, version %s\n",
	       DRIVER_VERSION);
 
	if (devfs_register_chrdev(TIPAR_MAJOR, "tipar", &tipar_fops)) {
		printk("tipar: unable to get major %d\n", TIPAR_MAJOR);
		return -EIO;
	}
 
	/* Use devfs with tree: /dev/ticables/par/[0..2] */
	devfs_handle = devfs_mk_dir(NULL, "ticables/par", NULL);
 
	if (parport_register_driver(&tipar_driver)) {
		printk("tipar: unable to register with parport\n");
		return -EIO;
	}
 
	return 0;
}
 
void __exit
tipar_cleanup_module(void)
{
	unsigned int i;
 
	/* Unregistering module */
	parport_unregister_driver(&tipar_driver);
 
	devfs_unregister(devfs_handle);
	devfs_unregister_chrdev(TIPAR_MAJOR, "tipar");
 
	for (i = 0; i < PP_NO; i++) {
		if (table[i].dev == NULL)
			continue;
		parport_unregister_device(table[i].dev);
	}
 
	printk("tipar: module unloaded !\n");
}
 
/* --------------------------------------------------------------------- */
 
__setup("tipar=", tipar_setup);
module_init(tipar_init_module);
module_exit(tipar_cleanup_module);
 
MODULE_AUTHOR(DRIVER_AUTHOR);
MODULE_DESCRIPTION(DRIVER_DESC);
MODULE_LICENSE(DRIVER_LICENSE);
 
EXPORT_NO_SYMBOLS;
 
MODULE_PARM(timeout, "i");
MODULE_PARM_DESC(timeout, "Timeout (default=1.5 seconds)");
MODULE_PARM(delay, "i");
MODULE_PARM_DESC(delay, "Inter-bit delay (default=10 microseconds)");