URL
https://opencores.org/ocsvn/or1k/or1k/trunk
Subversion Repositories or1k
[/] [or1k/] [trunk/] [linux/] [linux-2.4/] [drivers/] [ide/] [raid/] [medley.c] - Rev 1765
Compare with Previous | Blame | View Log
/* * MEDLEY SOFTWARE RAID DRIVER (Silicon Image 3112 and others) * * Copyright (C) 2003 Thomas Horsten <thomas@horsten.com> * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by * the Free Software Foundation; either version 2 of the License, or * (at your option) any later version. * * This program is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * * You should have received a copy of the GNU General Public License * along with this program; if not, write to the Free Software * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA * Copyright (C) 2003 Thomas Horsten <thomas@horsten.com> * All Rights Reserved. * * This driver uses the ATA RAID driver framework and is based on * code from Arjan van de Ven's silraid.c and hptraid.c. * * It is a driver for the Medley software RAID, which is used by * some IDE controllers, including the Silicon Image 3112 SATA * controller found onboard many modern motherboards, and the * CMD680 stand-alone PCI RAID controller. * * The author has only tested this on the Silicon Image SiI3112. * If you have any luck using more than 2 drives, and/or more * than one RAID set, and/or any other chip than the SiI3112, * please let me know by sending me mail at the above address. * * Currently, only striped mode is supported for these RAIDs. * * You are welcome to contact me if you have any questions or * suggestions for improvement. * * Change history: * * 20040310 - thomas@horsten.com * Removed C99 style variable declarations that confused gcc-2.x * Fixed a bug where more than one RAID set would not be detected correctly * General cleanup for submission to kernel * * 20031012 - thomas@horsten.com * Added support for BLKRRPART ioctl to re-read partition table * * 20030801 - thomas@horsten.com * First test release * */ #include <linux/version.h> #include <linux/module.h> #include <linux/init.h> #include <linux/kernel.h> #include <linux/sched.h> #include <linux/smp_lock.h> #include <linux/blkdev.h> #include <linux/blkpg.h> #include <linux/genhd.h> #include <linux/ioctl.h> #include <linux/ide.h> #include <asm/uaccess.h> #include "ataraid.h" /* * These options can be tuned if the need should occur. * * Even better, this driver could be changed to allocate the structures * dynamically. */ #define MAX_DRIVES_PER_SET 8 #define MAX_MEDLEY_ARRAYS 4 /* * Set to 1 only if you are debugging the driver, or if it doesn't work * the way you expect and you want to to report it. * * This will produce lots of kernel messages, some of which might * help me figure out what is going wrong). */ #define DEBUGGING_MEDLEY 0 #if DEBUGGING_MEDLEY #define dprintk(fmt, args...) printk(fmt, ##args) #else #define dprintk(fmt, args...) #endif /* * Medley RAID metadata structure. * * The metadata structure is based on the ATA drive ID from the drive itself, * with the RAID information in the vendor specific regions. * * We do not use all the fields, since we only support Striped Sets. */ struct medley_metadata { u8 driveid0[46]; u8 ascii_version[8]; u8 driveid1[52]; u32 total_sectors_low; u32 total_sectors_high; u16 reserved0; u8 driveid2[142]; u16 product_id; u16 vendor_id; u16 minor_ver; u16 major_ver; u16 creation_timestamp[3]; u16 chunk_size; u16 reserved1; u8 drive_number; u8 raid_type; u8 drives_per_striped_set; u8 striped_set_number; u8 drives_per_mirrored_set; u8 mirrored_set_number; u32 rebuild_ptr_low; u32 rebuild_ptr_high; u32 incarnation_no; u8 member_status; u8 mirrored_set_state; u8 reported_device_location; u8 member_location; u8 auto_rebuild; u8 reserved3[17]; u16 checksum; }; /* * This struct holds the information about a Medley array */ struct medley_array { u8 drives; u16 chunk_size; u32 sectors_per_row; u8 chunk_size_log; u16 present; u16 timestamp[3]; u32 sectors; int registered; atomic_t valid; int access; kdev_t members[MAX_DRIVES_PER_SET]; struct block_device *bdev[MAX_DRIVES_PER_SET]; }; static struct medley_array raid[MAX_MEDLEY_ARRAYS]; /* * Here we keep the offset of the ATARAID device ID's compared to our * own (this will normally be 0, unless another ATARAID driver has * registered some arrays before us). */ static int medley_devid_offset = 0; /* * This holds the number of detected arrays. */ static int medley_arrays = 0; /* * Wait queue for opening device (used when re-reading partition table) */ static DECLARE_WAIT_QUEUE_HEAD(medley_wait_open); /* * The interface functions used by the ataraid framework. */ static int medley_open(struct inode *inode, struct file *filp); static int medley_release(struct inode *inode, struct file *filp); static int medley_ioctl(struct inode *inode, struct file *file, unsigned int cmd, unsigned long arg); static int medley_make_request(request_queue_t * q, int rw, struct buffer_head *bh); static struct raid_device_operations medley_ops = { open: medley_open, release: medley_release, ioctl: medley_ioctl, make_request: medley_make_request }; /* * This is the list of devices to probe. */ static const kdev_t probelist[] = { MKDEV(IDE0_MAJOR, 0), MKDEV(IDE0_MAJOR, 64), MKDEV(IDE1_MAJOR, 0), MKDEV(IDE1_MAJOR, 64), MKDEV(IDE2_MAJOR, 0), MKDEV(IDE2_MAJOR, 64), MKDEV(IDE3_MAJOR, 0), MKDEV(IDE3_MAJOR, 64), MKDEV(IDE4_MAJOR, 0), MKDEV(IDE4_MAJOR, 64), MKDEV(IDE5_MAJOR, 0), MKDEV(IDE5_MAJOR, 64), MKDEV(IDE6_MAJOR, 0), MKDEV(IDE6_MAJOR, 64), MKDEV(0, 0) }; /* * Handler for ioctl calls to the virtual device */ static int medley_ioctl(struct inode *inode, struct file *file, unsigned int cmd, unsigned long arg) { unsigned int minor; unsigned long sectors; int devminor = (inode->i_rdev >> SHIFT) & MAJOR_MASK; int device = devminor - medley_devid_offset; int partition; dprintk("medley_ioctl\n"); minor = MINOR(inode->i_rdev) >> SHIFT; switch (cmd) { case BLKGETSIZE: /* Return device size */ if (!arg) return -EINVAL; sectors = ataraid_gendisk.part[MINOR(inode->i_rdev)].nr_sects; dprintk("medley_ioctl: BLKGETSIZE\n"); if (MINOR(inode->i_rdev) & 15) return put_user(sectors, (unsigned long *) arg); return put_user(raid[minor - medley_devid_offset].sectors, (unsigned long *) arg); break; case HDIO_GETGEO: { struct hd_geometry *loc = (struct hd_geometry *) arg; unsigned short bios_cyl = (unsigned short) (raid[minor].sectors / 255 / 63); /* truncate */ dprintk("medley_ioctl: HDIO_GETGEO\n"); if (!loc) return -EINVAL; if (put_user(255, (byte *) & loc->heads)) return -EFAULT; if (put_user(63, (byte *) & loc->sectors)) return -EFAULT; if (put_user (bios_cyl, (unsigned short *) &loc->cylinders)) return -EFAULT; if (put_user ((unsigned) ataraid_gendisk. part[MINOR(inode->i_rdev)].start_sect, (unsigned long *) &loc->start)) return -EFAULT; return 0; } case HDIO_GETGEO_BIG: { struct hd_big_geometry *loc = (struct hd_big_geometry *) arg; dprintk("medley_ioctl: HDIO_GETGEO_BIG\n"); if (!loc) return -EINVAL; if (put_user(255, (byte *) & loc->heads)) return -EFAULT; if (put_user(63, (byte *) & loc->sectors)) return -EFAULT; if (put_user (raid[minor - medley_devid_offset].sectors / 255 / 63, (unsigned int *) &loc->cylinders)) return -EFAULT; if (put_user ((unsigned) ataraid_gendisk. part[MINOR(inode->i_rdev)].start_sect, (unsigned long *) &loc->start)) return -EFAULT; return 0; } case BLKROSET: case BLKROGET: case BLKSSZGET: dprintk("medley_ioctl: BLK*\n"); return blk_ioctl(inode->i_rdev, cmd, arg); case BLKRRPART: /* Re-read partition tables */ if (!capable(CAP_SYS_ADMIN)) return -EACCES; if (minor != 0) return -EINVAL; if (atomic_read(&(raid[device].valid)) == 0) return -EINVAL; atomic_set(&(raid[device].valid), 0); if (raid[device].access != 1) { atomic_set(&(raid[device].valid), 1); return -EBUSY; } for (partition = 15; partition >= 0; partition--) { invalidate_device(MKDEV(ATARAID_MAJOR, partition + devminor), 1); ataraid_gendisk.part[partition + devminor].start_sect = 0; ataraid_gendisk.part[partition + devminor].nr_sects = 0; } ataraid_register_disk(device, raid[device].sectors); atomic_set(&(raid[device].valid), 1); wake_up(&medley_wait_open); return 0; default: return -EINVAL; } return 0; } /* * Handler to map a request to the real device. * If the request cannot be made because it spans multiple disks, * we return -1, otherwise we modify the request and return 1. */ static int medley_make_request(request_queue_t * q, int rw, struct buffer_head *bh) { u8 disk; u32 rsect = bh->b_rsector; int device = ((bh->b_rdev >> SHIFT) & MAJOR_MASK) - medley_devid_offset; struct medley_array *r = raid + device; /* Add the partition offset */ rsect = rsect + ataraid_gendisk.part[MINOR(bh->b_rdev)].start_sect; dprintk("medley_make_request, rsect=%ul\n", rsect); /* Detect if the request crosses a chunk barrier */ if (r->chunk_size_log) { if (((rsect & (r->chunk_size - 1)) + (bh->b_size / 512)) > (1 << r->chunk_size_log)) { return -1; } } else { if ((rsect / r->chunk_size) != ((rsect + (bh->b_size / 512) - 1) / r->chunk_size)) { return -1; } } /* * Medley arrays are simple enough, since the smallest disk decides the * number of sectors used per disk. So there is no need for the cutoff * magic found in other drivers like hptraid. */ if (r->chunk_size_log) { /* We save some expensive operations (1 div, 1 mul, 1 mod), * if the chunk size is a power of 2, which is true in most * cases (at least with my version of the RAID BIOS). */ disk = (rsect >> r->chunk_size_log) % r->drives; rsect = ((rsect / r->sectors_per_row) << r->chunk_size_log) + (rsect & (r->chunk_size - 1)); } else { disk = (rsect / r->chunk_size) % r->drives; rsect = rsect / r->sectors_per_row * r->chunk_size + rsect % r->chunk_size; } dprintk("medley_make_request :-), disk=%d, rsect=%ul\n", disk, rsect); bh->b_rdev = r->members[disk]; bh->b_rsector = rsect; return 1; } /* * Find out which array a drive belongs to, and add it to that array. * If it is not a member of a detected array, add a new array for it. */ void medley_add_raiddrive(kdev_t dev, struct medley_metadata *md) { int c; dprintk("Candidate drive %02x:%02x - drive %d of %d, stride %d, " "sectors %ul (%d MB)\n", MAJOR(dev), MINOR(dev), md->drive_number, md->drives_per_striped_set, md->chunk_size, md->total_sectors_low, md->total_sectors_low / 1024 / 1024 / 2); for (c = 0; c < medley_arrays; c++) { if ((raid[c].timestamp[0] == md->creation_timestamp[0]) && (raid[c].timestamp[1] == md->creation_timestamp[1]) && (raid[c].timestamp[2] == md->creation_timestamp[2]) && (raid[c].drives == md->drives_per_striped_set) && (raid[c].chunk_size == md->chunk_size) && ((raid[c].present & (1 << md->drive_number)) == 0)) { dprintk("Existing array %d\n", c); raid[c].present |= (1 << md->drive_number); raid[c].members[md->drive_number] = dev; break; } } if (c == medley_arrays) { dprintk("New array %d\n", medley_arrays); if (medley_arrays == MAX_MEDLEY_ARRAYS) { printk(KERN_ERR "Medley RAID: " "Too many RAID sets detected - you can change " "the max in the driver.\n"); } else { raid[c].timestamp[0] = md->creation_timestamp[0]; raid[c].timestamp[1] = md->creation_timestamp[1]; raid[c].timestamp[2] = md->creation_timestamp[2]; raid[c].drives = md->drives_per_striped_set; raid[c].chunk_size = md->chunk_size; raid[c].sectors_per_row = md->chunk_size * md->drives_per_striped_set; /* Speedup if chunk size is a power of 2 */ if (((raid[c].chunk_size - 1) & (raid[c].chunk_size)) == 0) { raid[c].chunk_size_log = ffs(raid[c].chunk_size) - 1; } else { raid[c].chunk_size_log = 0; } raid[c].present = (1 << md->drive_number); raid[c].members[md->drive_number] = dev; if (md->major_ver == 1) { raid[c].sectors = ((u32 *) (md))[27]; } else { raid[c].sectors = md->total_sectors_low; } medley_arrays++; } } } /* * Read the Medley metadata from a drive. * Returns the bh if it was found, otherwise NULL. */ struct buffer_head *medley_get_metadata(kdev_t dev) { struct buffer_head *bh = NULL; struct pci_dev *pcidev; u32 lba; int pos; struct medley_metadata *md; ide_drive_t *drvinfo = ide_info_ptr(dev, 0); if ((drvinfo == NULL) || drvinfo->capacity < 1) { return NULL; } dprintk("Probing %02x:%02x\n", MAJOR(dev), MINOR(dev)); /* If this drive is not on a PCI controller, it is not Medley RAID. * Medley matches the PCI device ID with the metadata to check if * it is valid. Unfortunately it is the only reliable way to identify * the superblock */ pcidev = drvinfo->hwif ? drvinfo->hwif->pci_dev : NULL; if (!pcidev) { return NULL; } /* * 4 copies of the metadata exist, in the following 4 sectors: * last, last-0x200, last-0x400, last-0x600. * * We must try each of these in order, until we find the metadata. * FIXME: This does not take into account drives with 48/64-bit LBA * addressing, even though the Medley RAID version 2 supports these. */ lba = drvinfo->capacity - 1; for (pos = 0; pos < 4; pos++, lba -= 0x200) { bh = bread(dev, lba, 512); if (!bh) { printk(KERN_ERR "Medley RAID (%02x:%02x): " "Error reading metadata (lba=%d)\n", MAJOR(dev), MINOR(dev), lba); break; } /* A valid Medley RAID has the PCI vendor/device ID of its * IDE controller, and the correct checksum. */ md = (void *) (bh->b_data); if (pcidev->vendor == md->vendor_id && pcidev->device == md->product_id) { u16 checksum = 0; u16 *p = (void *) (bh->b_data); int c; for (c = 0; c < 160; c++) { checksum += *p++; } dprintk ("Probing %02x:%02x csum=%d, major_ver=%d\n", MAJOR(dev), MINOR(dev), checksum, md->major_ver); if (((checksum == 0xffff) && (md->major_ver == 1)) || (checksum == 0)) { dprintk("Probing %02x:%02x VALID\n", MAJOR(dev), MINOR(dev)); break; } } /* Was not a valid superblock */ if (bh) { brelse(bh); bh = NULL; } } return bh; } /* * Determine if this drive belongs to a Medley array. */ static void medley_probe_drive(int major, int minor) { struct buffer_head *bh; kdev_t dev = MKDEV(major, minor); struct medley_metadata *md; bh = medley_get_metadata(dev); if (!bh) return; md = (void *) (bh->b_data); if (md->raid_type != 0x0) { printk(KERN_INFO "Medley RAID (%02x:%02x): " "Sorry, this driver currently only supports " "striped sets (RAID level 0).\n", major, minor); } else if (md->major_ver == 2 && md->total_sectors_high != 0) { printk(KERN_ERR "Medley RAID (%02x:%02x):" "Sorry, the driver only supports 32 bit LBA disks " "(disk too big).\n", major, minor); } else if (md->major_ver > 0 && md->major_ver > 2) { printk(KERN_INFO "Medley RAID (%02x:%02x): " "Unsupported version (%d.%d) - this driver supports " "Medley version 1.x and 2.x\n", major, minor, md->major_ver, md->minor_ver); } else if (md->drives_per_striped_set > MAX_DRIVES_PER_SET) { printk(KERN_ERR "Medley RAID (%02x:%02x): " "Striped set too large (%d drives) - please report " "this (and change max in driver).\n", major, minor, md->drives_per_striped_set); } else if ((md->drive_number > md->drives_per_striped_set) || (md->drives_per_striped_set < 1) || (md->chunk_size < 1)) { printk(KERN_ERR "Medley RAID (%02x:%02x): " "Metadata appears to be corrupt.\n", major, minor); } else { /* We have a good candidate, put it in the correct array */ medley_add_raiddrive(dev, md); } if (bh) { brelse(bh); } } /* * Taken from hptraid.c, this is called to prevent the device * from disappearing from under us and also nullifies the (incorrect) * partitions of the underlying disk. */ struct block_device *get_device_lock(kdev_t member) { struct block_device *bdev = bdget(member); struct gendisk *gd; int minor = MINOR(member); int j; if (bdev && blkdev_get(bdev, FMODE_READ | FMODE_WRITE, 0, BDEV_RAW) == 0) { /* * This is supposed to prevent others from * stealing our underlying disks. Now blank * the /proc/partitions table for the wrong * partition table, so that scripts don't * accidentally mount it and crash the kernel */ /* XXX: the 0 is an utter hack --hch */ gd = get_gendisk(MKDEV(MAJOR(member), 0)); if (gd != NULL) { if (gd->major == MAJOR(member)) { for (j = 1 + (minor << gd->minor_shift); j < ((minor + 1) << gd->minor_shift); j++) gd->part[j].nr_sects = 0; } } } return bdev; } /* * Initialise the driver. */ static __init int medley_init(void) { int c, d; memset(raid, 0, MAX_MEDLEY_ARRAYS * sizeof(struct medley_array)); /* Probe each of the drives on our list */ for (c = 0; probelist[c] != MKDEV(0, 0); c++) { medley_probe_drive(MAJOR(probelist[c]), MINOR(probelist[c])); } /* Check if the detected sets are complete */ for (c = 0; c < medley_arrays; c++) { if (raid[c].present != (1 << raid[c].drives) - 1) { printk(KERN_ERR "Medley RAID: " "Incomplete RAID set deleted - disks:"); for (d = 0; c < raid[c].drives; c++) { if (raid[c].present & (1 << d)) { printk(" %02x:%02x", MAJOR(raid[c].members[d]), MINOR(raid[c].members[d])); } } printk("\n"); if (c + 1 < medley_arrays) { memmove(raid + c + 1, raid + c, (medley_arrays - c - 1) * sizeof(struct medley_array)); } medley_arrays--; } } /* Register any remaining array(s) */ for (c = 0; c < medley_arrays; c++) { int device = ataraid_get_device(&medley_ops); if (device < 0) { printk(KERN_ERR "Medley RAID: " "Could not get ATARAID device.\n"); break; } if (c == 0) { /* First array, compute offset to our device ID's */ medley_devid_offset = device; dprintk("Medley_devid_offset: %d\n", medley_devid_offset); } else if (device - medley_devid_offset != c) { printk(KERN_ERR "Medley RAID: " "ATARAID gave us an illegal device ID.\n"); ataraid_release_device(device); break; } printk(KERN_INFO "Medley RAID: " "Striped set %d consists of %d disks, total %dMiB " "- disks:", c, raid[c].drives, raid[c].sectors / 1024 / 1024 / 2); for (d = 0; d < raid[c].drives; d++) { printk(" %02x:%02x", MAJOR(raid[c].members[d]), MINOR(raid[c].members[d])); raid[c].bdev[d] = get_device_lock(raid[c].members[d]); } printk("\n"); raid[c].registered = 1; atomic_set(&(raid[c].valid), 1); ataraid_register_disk(c, raid[c].sectors); } if (medley_arrays > 0) { printk(KERN_INFO "Medley RAID: %d active RAID set%s\n", medley_arrays, medley_arrays == 1 ? "" : "s"); return 0; } printk(KERN_INFO "Medley RAID: No usable RAID sets found\n"); return -ENODEV; } /* * Remove the arrays and clean up. */ static void __exit medley_exit(void) { int device, d; for (device = 0; device < medley_arrays; device++) { for (d = 0; d < raid[device].drives; d++) { if (raid[device].bdev[d]) { blkdev_put(raid[device].bdev[d], BDEV_RAW); raid[device].bdev[d] = NULL; } } if (raid[device].registered) { ataraid_release_device(device + medley_devid_offset); raid[device].registered = 0; } } } /* * Called to open the virtual device */ static int medley_open(struct inode *inode, struct file *filp) { int device = ((inode->i_rdev >> SHIFT) & MAJOR_MASK) - medley_devid_offset; dprintk("medley_open\n"); if (device < medley_arrays) { while (!atomic_read(&(raid[device].valid))) sleep_on(&medley_wait_open); raid[device].access++; MOD_INC_USE_COUNT; return (0); } return -ENODEV; } /* * Called to release the handle on the virtual device */ static int medley_release(struct inode *inode, struct file *filp) { int device = ((inode->i_rdev >> SHIFT) & MAJOR_MASK) - medley_devid_offset; dprintk("medley_release\n"); raid[device].access--; MOD_DEC_USE_COUNT; return 0; } module_init(medley_init); module_exit(medley_exit); MODULE_LICENSE("GPL");