OpenCores
URL https://opencores.org/ocsvn/or1k/or1k/trunk

Subversion Repositories or1k

[/] [or1k/] [trunk/] [linux/] [linux-2.4/] [drivers/] [media/] [video/] [bt819.c] - Rev 1774

Go to most recent revision | Compare with Previous | Blame | View Log

/* 
    bt819 - BT819A VideoStream Decoder (Rockwell Part)
 
    Copyright (C) 1999 Mike Bernson <mike@mlb.org>
    Copyright (C) 1998 Dave Perks <dperks@ibm.net>
 
    Modifications for LML33/DC10plus unified driver
    Copyright (C) 2000 Serguei Miridonov <mirsev@cicese.mx>
 
    This code was modify/ported from the saa7111 driver written
    by Dave Perks.
 
    This program is free software; you can redistribute it and/or modify
    it under the terms of the GNU General Public License as published by
    the Free Software Foundation; either version 2 of the License, or
    (at your option) any later version.
 
    This program is distributed in the hope that it will be useful,
    but WITHOUT ANY WARRANTY; without even the implied warranty of
    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
    GNU General Public License for more details.
 
    You should have received a copy of the GNU General Public License
    along with this program; if not, write to the Free Software
    Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
*/
 
#include <linux/module.h>
#include <linux/init.h>
#include <linux/delay.h>
#include <linux/errno.h>
#include <linux/fs.h>
#include <linux/kernel.h>
#include <linux/slab.h>
#include <linux/mm.h>
#include <linux/pci.h>
#include <linux/signal.h>
#include <linux/sched.h>
 
#include <linux/videodev.h>
 
#include <linux/i2c-old.h>
#include <linux/video_decoder.h>
 
#define DEBUG(x)       x	/* Debug driver */
 
/* ----------------------------------------------------------------------- */
 
struct bt819 {
	struct i2c_bus *bus;
	int addr;
	unsigned char reg[32];
 
	int initialized;
	int norm;
	int input;
	int enable;
	int bright;
	int contrast;
	int hue;
	int sat;
};
 
struct timing {
	int hactive;
	int hdelay;
	int vactive;
	int vdelay;
	int hscale;
	int vscale;
};
 
struct timing timing_data[] = {
	{864 - 24, 2, 623, 1, 0x0504, 0x0000},
	{858 - 24, 2, 523, 1, 0x00f8, 0x0000},
//      { 858-68, 64, 523, 1, 0x00f8, 0x0000 },
};
 
#define   I2C_BT819        0x8a
 
#define   I2C_DELAY   10
 
/* ----------------------------------------------------------------------- */
 
static int bt819_write(struct bt819 *dev, unsigned char subaddr,
		       unsigned char data)
{
	int ack;
 
	LOCK_I2C_BUS(dev->bus);
	i2c_start(dev->bus);
	i2c_sendbyte(dev->bus, dev->addr, I2C_DELAY);
	i2c_sendbyte(dev->bus, subaddr, I2C_DELAY);
	ack = i2c_sendbyte(dev->bus, data, I2C_DELAY);
	dev->reg[subaddr] = data;
	i2c_stop(dev->bus);
	UNLOCK_I2C_BUS(dev->bus);
	return ack;
}
 
static int bt819_setbit(struct bt819 *dev, int subaddr, int bit, int data)
{
	return bt819_write(dev, subaddr, (dev->reg[subaddr] & ~(1 << bit)) | (data ? (1 << bit) : 0));
}
 
static int bt819_write_block(struct bt819 *dev, unsigned const char *data,
			     unsigned int len)
{
	int ack;
	unsigned subaddr;
 
	ack = 0;
	while (len > 1) {
		LOCK_I2C_BUS(dev->bus);
		i2c_start(dev->bus);
		i2c_sendbyte(dev->bus, dev->addr, I2C_DELAY);
		ack = i2c_sendbyte(dev->bus, (subaddr = *data++), I2C_DELAY);
		ack = i2c_sendbyte(dev->bus, (dev->reg[subaddr] = *data++),
				 I2C_DELAY);
		len -= 2;
		while (len > 1 && *data == ++subaddr) {
			data++;
			ack =
			    i2c_sendbyte(dev->bus, (dev->reg[subaddr] = *data++), I2C_DELAY);
			len -= 2;
		}
		i2c_stop(dev->bus);
		UNLOCK_I2C_BUS(dev->bus);
	}
	return ack;
}
 
static int bt819_read(struct bt819 *dev, unsigned char subaddr)
{
	int data;
 
	LOCK_I2C_BUS(dev->bus);
	i2c_start(dev->bus);
	i2c_sendbyte(dev->bus, dev->addr, I2C_DELAY);
	i2c_sendbyte(dev->bus, subaddr, I2C_DELAY);
	i2c_start(dev->bus);
	i2c_sendbyte(dev->bus, dev->addr | 1, I2C_DELAY);
	data = i2c_readbyte(dev->bus, 1);
	i2c_stop(dev->bus);
	UNLOCK_I2C_BUS(dev->bus);
	return data;
}
 
static int bt819_init(struct i2c_device *device)
{
	struct bt819 *decoder;
 
	static unsigned char init[] = {
		//0x1f, 0x00,     /* Reset */
		0x01, 0x59,	/* 0x01 input format */
		0x02, 0x00,	/* 0x02 temporal decimation */
		0x03, 0x12,	/* 0x03 Cropping msb */
		0x04, 0x16,	/* 0x04 Vertical Delay, lsb */
		0x05, 0xe0,	/* 0x05 Vertical Active lsb */
		0x06, 0x80,	/* 0x06 Horizontal Delay lsb */
		0x07, 0xd0,	/* 0x07 Horizontal Active lsb */
		0x08, 0x00,	/* 0x08 Horizontal Scaling msb */
		0x09, 0xf8,	/* 0x09 Horizontal Scaling lsb */
		0x0a, 0x00,	/* 0x0a Brightness control */
		0x0b, 0x30,	/* 0x0b Miscellaneous control */
		0x0c, 0xd8,	/* 0x0c Luma Gain lsb */
		0x0d, 0xfe,	/* 0x0d Chroma Gain (U) lsb */
		0x0e, 0xb4,	/* 0x0e Chroma Gain (V) msb */
		0x0f, 0x00,	/* 0x0f Hue control */
		0x12, 0x04,	/* 0x12 Output Format */
		0x13, 0x20,	/* 0x13 Vertial Scaling msb 0x60, */
		0x14, 0x00,	/* 0x14 Vertial Scaling lsb */
		0x16, 0x04,	/* 0x16 Video Timing Polarity 0x02, */
		0x18, 0x68,	/* 0x18 AGC Delay */
		0x19, 0x5d,	/* 0x19 Burst Gate Delay */
		0x1a, 0x80,	/* 0x1a ADC Interface */
	};
 
	struct timing *timing;
 
	decoder = device->data;
	timing = &timing_data[decoder->norm];
 
	init[3 * 2 - 1] = (((timing->vdelay >> 8) & 0x03) << 6) |
	    (((timing->vactive >> 8) & 0x03) << 4) |
	    (((timing->hdelay >> 8) & 0x03) << 2) |
	    ((timing->hactive >> 8) & 0x03);
	init[4 * 2 - 1] = timing->vdelay & 0xff;
	init[5 * 2 - 1] = timing->vactive & 0xff;
	init[6 * 2 - 1] = timing->hdelay & 0xff;
	init[7 * 2 - 1] = timing->hactive & 0xff;
	init[8 * 2 - 1] = timing->hscale >> 8;
	init[9 * 2 - 1] = timing->hscale & 0xff;
 
	bt819_write(decoder, 0x1f, 0x00);
	mdelay(1);
	return bt819_write_block(decoder, init, sizeof(init));
 
}
 
/* ----------------------------------------------------------------------- */
 
static int bt819_attach(struct i2c_device *device)
{
	int i;
	struct bt819 *decoder;
 
	MOD_INC_USE_COUNT;
 
	device->data = decoder = kmalloc(sizeof(struct bt819), GFP_KERNEL);
	if (decoder == NULL) {
		MOD_DEC_USE_COUNT;
		return -ENOMEM;
	}
 
	memset(decoder, 0, sizeof(struct bt819));
	strcpy(device->name, "bt819");
	decoder->bus = device->bus;
	decoder->addr = device->addr;
	decoder->norm = VIDEO_MODE_NTSC;
	decoder->input = 0;
	decoder->enable = 1;
	decoder->bright = 32768;
	decoder->contrast = 32768;
	decoder->hue = 32768;
	decoder->sat = 32768;
	decoder->initialized = 0;
 
	i = bt819_init(device);
	if (i < 0) {
		printk(KERN_ERR "%s: bt819_attach: init status %d\n",
		       decoder->bus->name, i);
	} else {
		printk(KERN_INFO "%s: bt819_attach: chip version %x\n",
		       decoder->bus->name, bt819_read(decoder,
						      0x17) & 0x0f);
	}
	return 0;
}
 
static int bt819_detach(struct i2c_device *device)
{
	kfree(device->data);
	MOD_DEC_USE_COUNT;
	return 0;
}
 
static int bt819_command(struct i2c_device *device, unsigned int cmd, void *arg)
{
	int temp;
 
	struct bt819 *decoder = device->data;
	//return 0;
 
	if (!decoder->initialized) {	// First call to bt819_init could be
		bt819_init(device);	// without #FRST = 0
		decoder->initialized = 1;
	}
 
	switch (cmd) {
 
	case DECODER_GET_CAPABILITIES:
		{
			struct video_decoder_capability *cap = arg;
 
			cap->flags
			    = VIDEO_DECODER_PAL
			    | VIDEO_DECODER_NTSC | VIDEO_DECODER_CCIR;
			cap->inputs = 8;
			cap->outputs = 1;
		}
		break;
 
	case DECODER_GET_STATUS:
		{
			int *iarg = arg;
			int status;
			int res;
 
			status = bt819_read(decoder, 0x00);
			res = 0;
			if ((status & 0x80)) {
				res |= DECODER_STATUS_GOOD;
			}
			switch (decoder->norm) {
			case VIDEO_MODE_NTSC:
				res |= DECODER_STATUS_NTSC;
				break;
			case VIDEO_MODE_PAL:
				res |= DECODER_STATUS_PAL;
				break;
			default:
			case VIDEO_MODE_AUTO:
				if ((status & 0x10)) {
					res |= DECODER_STATUS_PAL;
				} else {
					res |= DECODER_STATUS_NTSC;
				}
				break;
			}
			res |= DECODER_STATUS_COLOR;
			*iarg = res;
 
			DEBUG(printk(KERN_INFO "%s-bt819: get status %x\n",
				     decoder->bus->name, *iarg));
		}
		break;
 
	case DECODER_SET_NORM:
		{
			int *iarg = arg;
			struct timing *timing;
 
			DEBUG(printk(KERN_INFO "%s-bt819: set norm %x\n",
				     decoder->bus->name, *iarg));
 
			if (*iarg == VIDEO_MODE_NTSC) {
				bt819_setbit(decoder, 0x01, 0, 1);
				bt819_setbit(decoder, 0x01, 1, 0);
				bt819_write(decoder, 0x18, 0x68);
				bt819_write(decoder, 0x19, 0x5d);
				//bt819_setbit(decoder, 0x1a,  5, 1);
				timing = &timing_data[VIDEO_MODE_NTSC];
			} else {
				bt819_setbit(decoder, 0x01, 0, 1);
				bt819_setbit(decoder, 0x01, 1, 1);
				bt819_write(decoder, 0x18, 0x7f);
				bt819_write(decoder, 0x19, 0x72);
				//bt819_setbit(decoder, 0x1a,  5, 0);
				timing = &timing_data[VIDEO_MODE_PAL];
			}
 
			bt819_write(decoder, 0x03,
				    (((timing->vdelay >> 8) & 0x03) << 6) |
				    (((timing->
				       vactive >> 8) & 0x03) << 4) |
				    (((timing->
				       hdelay >> 8) & 0x03) << 2) |
				    ((timing->hactive >> 8) & 0x03));
			bt819_write(decoder, 0x04, timing->vdelay & 0xff);
			bt819_write(decoder, 0x05, timing->vactive & 0xff);
			bt819_write(decoder, 0x06, timing->hdelay & 0xff);
			bt819_write(decoder, 0x07, timing->hactive & 0xff);
			bt819_write(decoder, 0x08, timing->hscale >> 8);
			bt819_write(decoder, 0x09, timing->hscale & 0xff);
			decoder->norm = *iarg;
		}
		break;
 
	case DECODER_SET_INPUT:
		{
			int *iarg = arg;
 
			DEBUG(printk(KERN_INFO "%s-bt819: set input %x\n",
				     decoder->bus->name, *iarg));
 
			if (*iarg < 0 || *iarg > 7) {
				return -EINVAL;
			}
 
			if (decoder->input != *iarg) {
				decoder->input = *iarg;
				/* select mode */
				if (decoder->input == 0) {
					bt819_setbit(decoder, 0x0b, 6, 0);
					bt819_setbit(decoder, 0x1a, 1, 1);
				} else {
					bt819_setbit(decoder, 0x0b, 6, 1);
					bt819_setbit(decoder, 0x1a, 1, 0);
				}
			}
		}
		break;
 
	case DECODER_SET_OUTPUT:
		{
			int *iarg = arg;
 
			DEBUG(printk(KERN_INFO "%s-bt819: set output %x\n",
				     decoder->bus->name, *iarg));
 
			/* not much choice of outputs */
			if (*iarg != 0) {
				return -EINVAL;
			}
		}
		break;
 
	case DECODER_ENABLE_OUTPUT:
		{
			int *iarg = arg;
			int enable = (*iarg != 0);
 
			DEBUG(printk
			      (KERN_INFO "%s-bt819: enable output %x\n",
			       decoder->bus->name, *iarg));
 
			if (decoder->enable != enable) {
				decoder->enable = enable;
 
				if (decoder->enable) {
					bt819_setbit(decoder, 0x16, 7, 0);
				} else {
					bt819_setbit(decoder, 0x16, 7, 1);
				}
			}
		}
		break;
 
	case DECODER_SET_PICTURE:
		{
			struct video_picture *pic = arg;
 
			DEBUG(printk
			      (KERN_INFO
			       "%s-bt819: set picture brightness %d contrast %d colour %d\n",
			       decoder->bus->name, pic->brightness,
			       pic->contrast, pic->colour));
 
 
			if (decoder->bright != pic->brightness) {
				/* We want -128 to 127 we get 0-65535 */
				decoder->bright = pic->brightness;
				bt819_write(decoder, 0x0a,
					    (decoder->bright >> 8) - 128);
			}
 
			if (decoder->contrast != pic->contrast) {
				/* We want 0 to 511 we get 0-65535 */
				decoder->contrast = pic->contrast;
				bt819_write(decoder, 0x0c,
					    (decoder->
					     contrast >> 7) & 0xff);
				bt819_setbit(decoder, 0x0b, 2,
					     ((decoder->
					       contrast >> 15) & 0x01));
			}
 
			if (decoder->sat != pic->colour) {
				/* We want 0 to 511 we get 0-65535 */
				decoder->sat = pic->colour;
				bt819_write(decoder, 0x0d,
					    (decoder->sat >> 7) & 0xff);
				bt819_setbit(decoder, 0x0b, 1,
					     ((decoder->
					       sat >> 15) & 0x01));
 
				temp = (decoder->sat * 201) / 237;
				bt819_write(decoder, 0x0e,
					    (temp >> 7) & 0xff);
				bt819_setbit(decoder, 0x0b, 0,
					     (temp >> 15) & 0x01);
			}
 
			if (decoder->hue != pic->hue) {
				/* We want -128 to 127 we get 0-65535 */
				decoder->hue = pic->hue;
				bt819_write(decoder, 0x0f,
					    128 - (decoder->hue >> 8));
			}
		}
		break;
 
	default:
		return -EINVAL;
	}
 
	return 0;
}
 
/* ----------------------------------------------------------------------- */
 
static struct i2c_driver i2c_driver_bt819 = {
	"bt819",		/* name */
	I2C_DRIVERID_VIDEODECODER,	/* ID */
	I2C_BT819, I2C_BT819 + 1,
 
	bt819_attach,
	bt819_detach,
	bt819_command
};
 
EXPORT_NO_SYMBOLS;
 
static int bt819_setup(void)
{
	return i2c_register_driver(&i2c_driver_bt819);
}
 
static void bt819_exit(void)
{
	i2c_unregister_driver(&i2c_driver_bt819);
}
 
module_init(bt819_setup);
module_exit(bt819_exit);
MODULE_LICENSE("GPL");
 

Go to most recent revision | Compare with Previous | Blame | View Log

powered by: WebSVN 2.1.0

© copyright 1999-2025 OpenCores.org, equivalent to Oliscience, all rights reserved. OpenCores®, registered trademark.