URL
https://opencores.org/ocsvn/or1k/or1k/trunk
Subversion Repositories or1k
[/] [or1k/] [trunk/] [linux/] [linux-2.4/] [drivers/] [media/] [video/] [bttv-cards.c] - Rev 1275
Go to most recent revision | Compare with Previous | Blame | View Log
/* bttv-cards.c this file has configuration informations - card-specific stuff like the big tvcards array for the most part Copyright (C) 1996,97,98 Ralph Metzler (rjkm@thp.uni-koeln.de) & Marcus Metzler (mocm@thp.uni-koeln.de) (c) 1999-2001 Gerd Knorr <kraxel@goldbach.in-berlin.de> This program is free software; you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free Software Foundation; either version 2 of the License, or (at your option) any later version. This program is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for more details. You should have received a copy of the GNU General Public License along with this program; if not, write to the Free Software Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. */ #include <linux/config.h> #include <linux/delay.h> #include <linux/module.h> #include <linux/kmod.h> #include <linux/init.h> #include <linux/pci.h> #include <linux/vmalloc.h> #ifdef CONFIG_FW_LOADER # include <linux/firmware.h> #endif #include <asm/io.h> #include "bttvp.h" #include "bt832.h" /* fwd decl */ static void boot_msp34xx(struct bttv *btv, int pin); static void boot_bt832(struct bttv *btv); static void hauppauge_eeprom(struct bttv *btv); static void avermedia_eeprom(struct bttv *btv); static void osprey_eeprom(struct bttv *btv); static void modtec_eeprom(struct bttv *btv); static void init_PXC200(struct bttv *btv); static void winview_audio(struct bttv *btv, struct video_audio *v, int set); static void lt9415_audio(struct bttv *btv, struct video_audio *v, int set); static void avermedia_tvphone_audio(struct bttv *btv, struct video_audio *v, int set); static void terratv_audio(struct bttv *btv, struct video_audio *v, int set); static void gvbctv3pci_audio(struct bttv *btv, struct video_audio *v, int set); static void winfast2000_audio(struct bttv *btv, struct video_audio *v, int set); static void pvbt878p9b_audio(struct bttv *btv, struct video_audio *v, int set); static void fv2000s_audio(struct bttv *btv, struct video_audio *v, int set); static void windvr_audio(struct bttv *btv, struct video_audio *v, int set); static void adtvk503_audio(struct bttv *btv, struct video_audio *v, int set); static void rv605_muxsel(struct bttv *btv, unsigned int input); static void eagle_muxsel(struct bttv *btv, unsigned int input); static void xguard_muxsel(struct bttv *btv, unsigned int input); static int terratec_active_radio_upgrade(struct bttv *btv); static int tea5757_read(struct bttv *btv); static int tea5757_write(struct bttv *btv, int value); static void identify_by_eeprom(struct bttv *btv, unsigned char eeprom_data[256]); /* config variables */ static unsigned int triton1=0; static unsigned int vsfx=0; static unsigned int latency = UNSET; unsigned int no_overlay=-1; static unsigned int card[BTTV_MAX] = { [ 0 ... (BTTV_MAX-1) ] = UNSET}; static unsigned int pll[BTTV_MAX] = { [ 0 ... (BTTV_MAX-1) ] = UNSET}; static unsigned int tuner[BTTV_MAX] = { [ 0 ... (BTTV_MAX-1) ] = UNSET}; static unsigned int svhs[BTTV_MAX] = { [ 0 ... (BTTV_MAX-1) ] = UNSET}; #ifdef MODULE static unsigned int autoload = 1; #else static unsigned int autoload = 0; #endif static unsigned int gpiomask = UNSET; static unsigned int audioall = UNSET; static unsigned int audiomux[5] = { [ 0 ... 4 ] = UNSET }; /* insmod options */ MODULE_PARM(triton1,"i"); MODULE_PARM_DESC(triton1,"set ETBF pci config bit " "[enable bug compatibility for triton1 + others]"); MODULE_PARM(vsfx,"i"); MODULE_PARM_DESC(vsfx,"set VSFX pci config bit " "[yet another chipset flaw workaround]"); MODULE_PARM(no_overlay,"i"); MODULE_PARM(latency,"i"); MODULE_PARM_DESC(latency,"pci latency timer"); MODULE_PARM(card,"1-" __stringify(BTTV_MAX) "i"); MODULE_PARM_DESC(card,"specify TV/grabber card model, see CARDLIST file for a list"); MODULE_PARM(pll,"1-" __stringify(BTTV_MAX) "i"); MODULE_PARM_DESC(pll,"specify installed crystal (0=none, 28=28 MHz, 35=35 MHz)"); MODULE_PARM(tuner,"1-" __stringify(BTTV_MAX) "i"); MODULE_PARM_DESC(tuner,"specify installed tuner type"); MODULE_PARM(autoload,"i"); MODULE_PARM_DESC(autoload,"automatically load i2c modules like tuner.o, default is 1 (yes)"); MODULE_PARM(gpiomask,"i"); MODULE_PARM(audioall,"i"); MODULE_PARM(audiomux,"1-5i"); /* kernel args */ #ifndef MODULE static int __init p_card(char *str) { return bttv_parse(str,BTTV_MAX,card); } static int __init p_pll(char *str) { return bttv_parse(str,BTTV_MAX,pll); } static int __init p_tuner(char *str) { return bttv_parse(str,BTTV_MAX,tuner); } __setup("bttv.card=", p_card); __setup("bttv.pll=", p_pll); __setup("bttv.tuner=", p_tuner); int __init bttv_parse(char *str, int max, int *vals) { int i,number,res = 2; for (i = 0; res == 2 && i < max; i++) { res = get_option(&str,&number); if (res) vals[i] = number; } return 1; } #endif /* ----------------------------------------------------------------------- */ /* list of card IDs for bt878+ cards */ static struct CARD { unsigned id; int cardnr; char *name; } cards[] __devinitdata = { { 0x13eb0070, BTTV_HAUPPAUGE878, "Hauppauge WinTV" }, { 0x39000070, BTTV_HAUPPAUGE878, "Hauppauge WinTV-D" }, { 0x45000070, BTTV_HAUPPAUGEPVR, "Hauppauge WinTV/PVR" }, { 0xff000070, BTTV_OSPREY1x0, "Osprey-100" }, { 0xff010070, BTTV_OSPREY2x0_SVID,"Osprey-200" }, { 0xff020070, BTTV_OSPREY500, "Osprey-500" }, { 0xff030070, BTTV_OSPREY2000, "Osprey-2000" }, { 0xff040070, BTTV_OSPREY540, "Osprey-540" }, { 0x00011002, BTTV_ATI_TVWONDER, "ATI TV Wonder" }, { 0x00031002, BTTV_ATI_TVWONDERVE,"ATI TV Wonder/VE" }, { 0x6606107d, BTTV_WINFAST2000, "Leadtek WinFast TV 2000" }, { 0x6607107d, BTTV_WINFAST2000, "Leadtek WinFast VC 100" }, { 0x263610b4, BTTV_STB2, "STB TV PCI FM, Gateway P/N 6000704" }, { 0x264510b4, BTTV_STB2, "STB TV PCI FM, Gateway P/N 6000704" }, { 0x402010fc, BTTV_GVBCTV3PCI, "I-O Data Co. GV-BCTV3/PCI" }, { 0x405010fc, BTTV_GVBCTV4PCI, "I-O Data Co. GV-BCTV4/PCI" }, { 0x407010fc, BTTV_GVBCTV5PCI, "I-O Data Co. GV-BCTV5/PCI" }, { 0x001211bd, BTTV_PINNACLE, "Pinnacle PCTV" }, { 0x001c11bd, BTTV_PINNACLESAT, "Pinnacle PCTV Sat" }, // some cards ship with byteswapped IDs ... { 0x1200bd11, BTTV_PINNACLE, "Pinnacle PCTV [bswap]" }, { 0xff00bd11, BTTV_PINNACLE, "Pinnacle PCTV [bswap]" }, { 0x3000121a, BTTV_VOODOOTV_FM, "3Dfx VoodooTV FM/ VoodooTV 200" }, { 0x3060121a, BTTV_STB2, "3Dfx VoodooTV 100/ STB OEM" }, { 0x3000144f, BTTV_MAGICTVIEW063, "(Askey Magic/others) TView99 CPH06x" }, { 0x3002144f, BTTV_MAGICTVIEW061, "(Askey Magic/others) TView99 CPH05x" }, { 0x3005144f, BTTV_MAGICTVIEW061, "(Askey Magic/others) TView99 CPH061/06L (T1/LC)" }, { 0x5000144f, BTTV_MAGICTVIEW061, "Askey CPH050" }, { 0x00011461, BTTV_AVPHONE98, "AVerMedia TVPhone98" }, { 0x00021461, BTTV_AVERMEDIA98, "AVermedia TVCapture 98" }, { 0x00031461, BTTV_AVPHONE98, "AVerMedia TVPhone98" }, { 0x00041461, BTTV_AVERMEDIA98, "AVerMedia TVCapture 98" }, { 0x03001461, BTTV_AVERMEDIA98, "VDOMATE TV TUNER CARD" }, { 0x300014ff, BTTV_MAGICTVIEW061, "TView 99 (CPH061)" }, { 0x300214ff, BTTV_PHOEBE_TVMAS, "Phoebe TV Master (CPH060)" }, { 0x1117153b, BTTV_TERRATVALUE, "Terratec TValue (Philips PAL B/G)" }, { 0x1118153b, BTTV_TERRATVALUE, "Terratec TValue (Temic PAL B/G)" }, { 0x1119153b, BTTV_TERRATVALUE, "Terratec TValue (Philips PAL I)" }, { 0x111a153b, BTTV_TERRATVALUE, "Terratec TValue (Temic PAL I)" }, { 0x1123153b, BTTV_TERRATVRADIO, "Terratec TV Radio+" }, { 0x1127153b, BTTV_TERRATV, "Terratec TV+ (V1.05)" }, // clashes with FlyVideo //{ 0x18521852, BTTV_TERRATV, "Terratec TV+ (V1.10)" }, { 0x1134153b, BTTV_TERRATVALUE, "Terratec TValue (LR102)" }, { 0x1135153b, BTTV_TERRATVALUER, "Terratec TValue Radio" }, // LR102 { 0x5018153b, BTTV_TERRATVALUE, "Terratec TValue" }, // ?? { 0x400015b0, BTTV_ZOLTRIX_GENIE, "Zoltrix Genie TV" }, { 0x400a15b0, BTTV_ZOLTRIX_GENIE, "Zoltrix Genie TV" }, { 0x400d15b0, BTTV_ZOLTRIX_GENIE, "Zoltrix Genie TV / Radio" }, { 0x401015b0, BTTV_ZOLTRIX_GENIE, "Zoltrix Genie TV / Radio" }, { 0x401615b0, BTTV_ZOLTRIX_GENIE, "Zoltrix Genie TV / Radio" }, { 0x1430aa00, BTTV_PV143, "Provideo PV143A" }, { 0x1431aa00, BTTV_PV143, "Provideo PV143B" }, { 0x1432aa00, BTTV_PV143, "Provideo PV143C" }, { 0x1433aa00, BTTV_PV143, "Provideo PV143D" }, { 0x1460aa00, BTTV_PV150, "Provideo PV150A-1" }, { 0x1461aa01, BTTV_PV150, "Provideo PV150A-2" }, { 0x1462aa02, BTTV_PV150, "Provideo PV150A-3" }, { 0x1463aa03, BTTV_PV150, "Provideo PV150A-4" }, { 0x1464aa04, BTTV_PV150, "Provideo PV150B-1" }, { 0x1465aa05, BTTV_PV150, "Provideo PV150B-2" }, { 0x1466aa06, BTTV_PV150, "Provideo PV150B-3" }, { 0x1467aa07, BTTV_PV150, "Provideo PV150B-4" }, { 0xa1550000, BTTV_IVC200, "IVC-200" }, { 0xa1550001, BTTV_IVC200, "IVC-200" }, { 0xa1550002, BTTV_IVC200, "IVC-200" }, { 0xa1550003, BTTV_IVC200, "IVC-200" }, { 0xa1550100, BTTV_IVC200, "IVC-200G" }, { 0xa1550101, BTTV_IVC200, "IVC-200G" }, { 0xa1550102, BTTV_IVC200, "IVC-200G" }, { 0xa1550103, BTTV_IVC200, "IVC-200G" }, { 0x41424344, BTTV_GRANDTEC, "GrandTec Multi Capture" }, { 0x01020304, BTTV_XGUARD, "Grandtec Grand X-Guard" }, { 0x010115cb, BTTV_GMV1, "AG GMV1" }, { 0x010114c7, BTTV_MODTEC_205, "Modular Technology MM201/MM202/MM205/MM210/MM215 PCTV" }, { 0x18501851, BTTV_CHRONOS_VS2, "FlyVideo 98 (LR50)/ Chronos Video Shuttle II" }, { 0x18511851, BTTV_FLYVIDEO98EZ, "FlyVideo 98EZ (LR51)/ CyberMail AV" }, { 0x18521852, BTTV_TYPHOON_TVIEW, "FlyVideo 98FM (LR50)/ Typhoon TView TV/FM Tuner" }, { 0x10b42636, BTTV_HAUPPAUGE878, "STB ???" }, { 0x217d6606, BTTV_WINFAST2000, "Leadtek WinFast TV 2000" }, { 0x03116000, BTTV_SENSORAY311, "Sensoray 311" }, { 0x00790e11, BTTV_WINDVR, "Canopus WinDVR PCI" }, { 0xa0fca1a0, BTTV_ZOLTRIX, "Face to Face Tvmax" }, { 0x01010071, BTTV_NEBULA_DIGITV, "Nebula Electronics DigiTV" }, // likely broken, vendor id doesn't match the other magic views ... //{ 0xa0fca04f, BTTV_MAGICTVIEW063, "Guillemot Maxi TV Video 3" }, { 0, -1, NULL } }; /* ----------------------------------------------------------------------- */ /* array with description for bt848 / bt878 tv/grabber cards */ struct tvcard bttv_tvcards[] = { { /* ---- card 0x00 ---------------------------------- */ .name = " *** UNKNOWN/GENERIC *** ", .video_inputs = 4, .audio_inputs = 1, .tuner = 0, .svhs = 2, .muxsel = { 2, 3, 1, 0}, .tuner_type = -1, },{ .name = "MIRO PCTV", .video_inputs = 4, .audio_inputs = 1, .tuner = 0, .svhs = 2, .gpiomask = 15, .muxsel = { 2, 3, 1, 1}, .audiomux = { 2, 0, 0, 0, 10}, .needs_tvaudio = 1, .tuner_type = -1, },{ .name = "Hauppauge (bt848)", .video_inputs = 4, .audio_inputs = 1, .tuner = 0, .svhs = 2, .gpiomask = 7, .muxsel = { 2, 3, 1, 1}, .audiomux = { 0, 1, 2, 3, 4}, .needs_tvaudio = 1, .tuner_type = -1, },{ .name = "STB, Gateway P/N 6000699 (bt848)", .video_inputs = 3, .audio_inputs = 1, .tuner = 0, .svhs = 2, .gpiomask = 7, .muxsel = { 2, 3, 1, 1}, .audiomux = { 4, 0, 2, 3, 1}, .no_msp34xx = 1, .needs_tvaudio = 1, .tuner_type = TUNER_PHILIPS_NTSC, .pll = PLL_28, .has_radio = 1, },{ /* ---- card 0x04 ---------------------------------- */ .name = "Intel Create and Share PCI/ Smart Video Recorder III", .video_inputs = 4, .audio_inputs = 0, .tuner = -1, .svhs = 2, .gpiomask = 0, .muxsel = { 2, 3, 1, 1}, .audiomux = { 0 }, .needs_tvaudio = 0, .tuner_type = 4, },{ .name = "Diamond DTV2000", .video_inputs = 4, .audio_inputs = 1, .tuner = 0, .svhs = 2, .gpiomask = 3, .muxsel = { 2, 3, 1, 0}, .audiomux = { 0, 1, 0, 1, 3}, .needs_tvaudio = 1, .tuner_type = -1, },{ .name = "AVerMedia TVPhone", .video_inputs = 3, .audio_inputs = 1, .tuner = 0, .svhs = 3, .muxsel = { 2, 3, 1, 1}, .gpiomask = 0x0f, .audiomux = { 0x0c, 0x04, 0x08, 0x04, 0}, /* 0x04 for some cards ?? */ .needs_tvaudio = 1, .tuner_type = -1, .audio_hook = avermedia_tvphone_audio, },{ .name = "MATRIX-Vision MV-Delta", .video_inputs = 5, .audio_inputs = 1, .tuner = -1, .svhs = 3, .gpiomask = 0, .muxsel = { 2, 3, 1, 0, 0}, .audiomux = {0 }, .needs_tvaudio = 1, .tuner_type = -1, },{ /* ---- card 0x08 ---------------------------------- */ .name = "Lifeview FlyVideo II (Bt848) LR26 / MAXI TV Video PCI2 LR26", .video_inputs = 4, .audio_inputs = 1, .tuner = 0, .svhs = 2, .gpiomask = 0xc00, .muxsel = { 2, 3, 1, 1}, .audiomux = { 0, 0xc00, 0x800, 0x400, 0xc00, 0}, .needs_tvaudio = 1, .pll = PLL_28, .tuner_type = -1, },{ .name = "IMS/IXmicro TurboTV", .video_inputs = 3, .audio_inputs = 1, .tuner = 0, .svhs = 2, .gpiomask = 3, .muxsel = { 2, 3, 1, 1}, .audiomux = { 1, 1, 2, 3, 0}, .needs_tvaudio = 0, .pll = PLL_28, .tuner_type = TUNER_TEMIC_PAL, },{ .name = "Hauppauge (bt878)", .video_inputs = 4, .audio_inputs = 1, .tuner = 0, .svhs = 2, .gpiomask = 0x0f, /* old: 7 */ .muxsel = { 2, 0, 1, 1}, .audiomux = { 0, 1, 2, 3, 4}, .needs_tvaudio = 1, .pll = PLL_28, .tuner_type = -1, },{ .name = "MIRO PCTV pro", .video_inputs = 3, .audio_inputs = 1, .tuner = 0, .svhs = 2, .gpiomask = 0x3014f, .muxsel = { 2, 3, 1, 1}, .audiomux = { 0x20001,0x10001, 0, 0,10}, .needs_tvaudio = 1, .tuner_type = -1, },{ /* ---- card 0x0c ---------------------------------- */ .name = "ADS Technologies Channel Surfer TV (bt848)", .video_inputs = 3, .audio_inputs = 1, .tuner = 0, .svhs = 2, .gpiomask = 15, .muxsel = { 2, 3, 1, 1}, .audiomux = { 13, 14, 11, 7, 0, 0}, .needs_tvaudio = 1, .tuner_type = -1, },{ .name = "AVerMedia TVCapture 98", .video_inputs = 3, .audio_inputs = 4, .tuner = 0, .svhs = 2, .gpiomask = 15, .muxsel = { 2, 3, 1, 1}, .audiomux = { 13, 14, 11, 7, 0, 0}, .needs_tvaudio = 1, .msp34xx_alt = 1, .pll = PLL_28, .tuner_type = TUNER_PHILIPS_PAL, },{ .name = "Aimslab Video Highway Xtreme (VHX)", .video_inputs = 3, .audio_inputs = 1, .tuner = 0, .svhs = 2, .gpiomask = 7, .muxsel = { 2, 3, 1, 1}, .audiomux = { 0, 2, 1, 3, 4}, /* old: { 0, 1, 2, 3, 4} */ .needs_tvaudio = 1, .pll = PLL_28, .tuner_type = -1, },{ .name = "Zoltrix TV-Max", .video_inputs = 3, .audio_inputs = 1, .tuner = 0, .svhs = 2, .gpiomask = 15, .muxsel = { 2, 3, 1, 1}, .audiomux = {0 , 0, 1 , 0, 10}, .needs_tvaudio = 1, .tuner_type = -1, },{ /* ---- card 0x10 ---------------------------------- */ .name = "Prolink Pixelview PlayTV (bt878)", .video_inputs = 3, .audio_inputs = 1, .tuner = 0, .svhs = 2, .gpiomask = 0x01fe00, .muxsel = { 2, 3, 1, 1}, .audiomux = { 0x01c000, 0, 0x018000, 0x014000, 0x002000, 0 }, .needs_tvaudio = 1, .pll = PLL_28, .tuner_type = -1, },{ .name = "Leadtek WinView 601", .video_inputs = 3, .audio_inputs = 1, .tuner = 0, .svhs = 2, .gpiomask = 0x8300f8, .muxsel = { 2, 3, 1, 1,0}, .audiomux = { 0x4fa007,0xcfa007,0xcfa007,0xcfa007,0xcfa007,0xcfa007}, .needs_tvaudio = 1, .tuner_type = -1, .audio_hook = winview_audio, .has_radio = 1, },{ .name = "AVEC Intercapture", .video_inputs = 3, .audio_inputs = 2, .tuner = 0, .svhs = 2, .gpiomask = 0, .muxsel = {2, 3, 1, 1}, .audiomux = {1, 0, 0, 0, 0}, .needs_tvaudio = 1, .tuner_type = -1, },{ .name = "Lifeview FlyVideo II EZ /FlyKit LR38 Bt848 (capture only)", .video_inputs = 4, .audio_inputs = 1, .tuner = -1, .svhs = -1, .gpiomask = 0x8dff00, .muxsel = { 2, 3, 1, 1}, .audiomux = { 0 }, .no_msp34xx = 1, .tuner_type = -1, },{ /* ---- card 0x14 ---------------------------------- */ .name = "CEI Raffles Card", .video_inputs = 3, .audio_inputs = 3, .tuner = 0, .svhs = 2, .muxsel = {2, 3, 1, 1}, .tuner_type = -1, },{ .name = "Lifeview FlyVideo 98/ Lucky Star Image World ConferenceTV LR50", .video_inputs = 4, .audio_inputs = 2, // tuner, line in .tuner = 0, .svhs = 2, .gpiomask = 0x1800, .muxsel = { 2, 3, 1, 1}, .audiomux = { 0, 0x800, 0x1000, 0x1000, 0x1800}, .pll = PLL_28, .tuner_type = TUNER_PHILIPS_PAL_I, },{ .name = "Askey CPH050/ Phoebe Tv Master + FM", .video_inputs = 3, .audio_inputs = 1, .tuner = 0, .svhs = 2, .gpiomask = 0xc00, .muxsel = { 2, 3, 1, 1}, .audiomux = {0, 1, 0x800, 0x400, 0xc00, 0}, .needs_tvaudio = 1, .pll = PLL_28, .tuner_type = -1, },{ .name = "Modular Technology MM201/MM202/MM205/MM210/MM215 PCTV, bt878", .video_inputs = 3, .audio_inputs = 1, .tuner = 0, .svhs = -1, .gpiomask = 7, .muxsel = { 2, 3, -1 }, .digital_mode = DIGITAL_MODE_CAMERA, .audiomux = { 0, 0, 0, 0, 0 }, .no_msp34xx = 1, .pll = PLL_28, .tuner_type = TUNER_ALPS_TSBB5_PAL_I, },{ /* ---- card 0x18 ---------------------------------- */ .name = "Askey CPH05X/06X (bt878) [many vendors]", .video_inputs = 3, .audio_inputs = 1, .tuner = 0, .svhs = 2, .gpiomask = 0xe00, .muxsel = { 2, 3, 1, 1}, .audiomux = {0x400, 0x400, 0x400, 0x400, 0xc00}, .needs_tvaudio = 1, .pll = PLL_28, .tuner_type = -1, },{ .name = "Terratec TerraTV+ Version 1.0 (Bt848)/ Terra TValue Version 1.0/ Vobis TV-Boostar", .video_inputs = 3, .audio_inputs = 1, .tuner = 0, .svhs = 2, .gpiomask = 0x1f0fff, .muxsel = { 2, 3, 1, 1}, .audiomux = { 0x20000, 0x30000, 0x10000, 0, 0x40000}, .needs_tvaudio = 0, .tuner_type = TUNER_PHILIPS_PAL, .audio_hook = terratv_audio, },{ .name = "Hauppauge WinCam newer (bt878)", .video_inputs = 4, .audio_inputs = 1, .tuner = 0, .svhs = 3, .gpiomask = 7, .muxsel = { 2, 0, 1, 1}, .audiomux = { 0, 1, 2, 3, 4}, .needs_tvaudio = 1, .tuner_type = -1, },{ .name = "Lifeview FlyVideo 98/ MAXI TV Video PCI2 LR50", .video_inputs = 4, .audio_inputs = 2, .tuner = 0, .svhs = 2, .gpiomask = 0x1800, .muxsel = { 2, 3, 1, 1}, .audiomux = { 0, 0x800, 0x1000, 0x1000, 0x1800}, .pll = PLL_28, .tuner_type = TUNER_PHILIPS_SECAM, },{ /* ---- card 0x1c ---------------------------------- */ .name = "Terratec TerraTV+ Version 1.1 (bt878)", .video_inputs = 3, .audio_inputs = 1, .tuner = 0, .svhs = 2, .gpiomask = 0x1f0fff, .muxsel = { 2, 3, 1, 1}, .audiomux = { 0x20000, 0x30000, 0x10000, 0x00000, 0x40000}, .needs_tvaudio = 0, .tuner_type = TUNER_PHILIPS_PAL, .audio_hook = terratv_audio, /* GPIO wiring: External 20 pin connector (for Active Radio Upgrade board) gpio00: i2c-sda gpio01: i2c-scl gpio02: om5610-data gpio03: om5610-clk gpio04: om5610-wre gpio05: om5610-stereo gpio06: rds6588-davn gpio07: Pin 7 n.c. gpio08: nIOW gpio09+10: nIOR, nSEL ?? (bt878) gpio09: nIOR (bt848) gpio10: nSEL (bt848) Sound Routing: gpio16: u2-A0 (1st 4052bt) gpio17: u2-A1 gpio18: u2-nEN gpio19: u4-A0 (2nd 4052) gpio20: u4-A1 u4-nEN - GND Btspy: 00000 : Cdrom (internal audio input) 10000 : ext. Video audio input 20000 : TV Mono a0000 : TV Mono/2 1a0000 : TV Stereo 30000 : Radio 40000 : Mute */ },{ /* Jannik Fritsch <jannik@techfak.uni-bielefeld.de> */ .name = "Imagenation PXC200", .video_inputs = 5, .audio_inputs = 1, .tuner = -1, .svhs = 1, /* was: 4 */ .gpiomask = 0, .muxsel = { 2, 3, 1, 0, 0}, .audiomux = { 0 }, .needs_tvaudio = 1, .tuner_type = -1, },{ .name = "Lifeview FlyVideo 98 LR50", .video_inputs = 4, .audio_inputs = 1, .tuner = 0, .svhs = 2, .gpiomask = 0x1800, //0x8dfe00 .muxsel = { 2, 3, 1, 1}, .audiomux = { 0, 0x0800, 0x1000, 0x1000, 0x1800, 0 }, .pll = PLL_28, .tuner_type = -1, },{ .name = "Formac iProTV, Formac ProTV I (bt848)", .video_inputs = 4, .audio_inputs = 1, .tuner = 0, .svhs = 3, .gpiomask = 1, .muxsel = { 2, 3, 1, 1}, .audiomux = { 1, 0, 0, 0, 0 }, .pll = PLL_28, .tuner_type = TUNER_PHILIPS_PAL, },{ /* ---- card 0x20 ---------------------------------- */ .name = "Intel Create and Share PCI/ Smart Video Recorder III", .video_inputs = 4, .audio_inputs = 0, .tuner = -1, .svhs = 2, .gpiomask = 0, .muxsel = { 2, 3, 1, 1}, .audiomux = { 0 }, .needs_tvaudio = 0, .tuner_type = 4, },{ .name = "Terratec TerraTValue Version Bt878", .video_inputs = 3, .audio_inputs = 1, .tuner = 0, .svhs = 2, .gpiomask = 0xffff00, .muxsel = { 2, 3, 1, 1}, .audiomux = { 0x500, 0, 0x300, 0x900, 0x900}, .needs_tvaudio = 1, .pll = PLL_28, .tuner_type = TUNER_PHILIPS_PAL, },{ .name = "Leadtek WinFast 2000/ WinFast 2000 XP", .video_inputs = 4, .audio_inputs = 1, .tuner = 0, .svhs = 2, .gpiomask = 0xc33000, .muxsel = { 2, 3, 1, 1, 0}, // TV, CVid, SVid, CVid over SVid connector .audiomux = { 0x422000,0x1000,0x0000,0x620000,0x800000}, /* Audio Routing for "WinFast 2000 XP" (no tv stereo !) gpio23 -- hef4052:nEnable (0x800000) gpio12 -- hef4052:A1 gpio13 -- hef4052:A0 0x0000: external audio 0x1000: FM 0x2000: TV 0x3000: n.c. Note: There exists another variant "Winfast 2000" with tv stereo !? Note: eeprom only contains FF and pci subsystem id 107d:6606 */ .needs_tvaudio = 0, .pll = PLL_28, .has_radio = 1, .tuner_type = 5, // default for now, gpio reads BFFF06 for Pal bg+dk .audio_hook = winfast2000_audio, },{ .name = "Lifeview FlyVideo 98 LR50 / Chronos Video Shuttle II", .video_inputs = 4, .audio_inputs = 3, .tuner = 0, .svhs = 2, .gpiomask = 0x1800, .muxsel = { 2, 3, 1, 1}, .audiomux = { 0, 0x800, 0x1000, 0x1000, 0x1800}, .pll = PLL_28, .tuner_type = -1, },{ /* ---- card 0x24 ---------------------------------- */ .name = "Lifeview FlyVideo 98FM LR50 / Typhoon TView TV/FM Tuner", .video_inputs = 4, .audio_inputs = 3, .tuner = 0, .svhs = 2, .gpiomask = 0x1800, .muxsel = { 2, 3, 1, 1}, .audiomux = { 0, 0x800, 0x1000, 0x1000, 0x1800, 0 }, .pll = PLL_28, .tuner_type = -1, .has_radio = 1, },{ .name = "Prolink PixelView PlayTV pro", .video_inputs = 3, .audio_inputs = 1, .tuner = 0, .svhs = 2, .gpiomask = 0xff, .muxsel = { 2, 3, 1, 1 }, .audiomux = { 0x21, 0x20, 0x24, 0x2c, 0x29, 0x29 }, .no_msp34xx = 1, .pll = PLL_28, .tuner_type = -1, },{ .name = "Askey CPH06X TView99", .video_inputs = 4, .audio_inputs = 1, .tuner = 0, .svhs = 2, .gpiomask = 0x551e00, .muxsel = { 2, 3, 1, 0}, .audiomux = { 0x551400, 0x551200, 0, 0, 0x551c00, 0x551200 }, .needs_tvaudio = 1, .pll = PLL_28, .tuner_type = 1, },{ .name = "Pinnacle PCTV Studio/Rave", .video_inputs = 3, .audio_inputs = 1, .tuner = 0, .svhs = 2, .gpiomask = 0x03000F, .muxsel = { 2, 3, 1, 1}, .audiomux = { 2, 0, 0, 0, 1}, .needs_tvaudio = 1, .pll = PLL_28, .tuner_type = -1, },{ /* ---- card 0x28 ---------------------------------- */ .name = "STB TV PCI FM, Gateway P/N 6000704 (bt878), 3Dfx VoodooTV 100", .video_inputs = 3, .audio_inputs = 1, .tuner = 0, .svhs = 2, .gpiomask = 7, .muxsel = { 2, 3, 1, 1}, .audiomux = { 4, 0, 2, 3, 1}, .no_msp34xx = 1, .needs_tvaudio = 1, .tuner_type = TUNER_PHILIPS_NTSC, .pll = PLL_28, .has_radio = 1, },{ .name = "AVerMedia TVPhone 98", .video_inputs = 3, .audio_inputs = 4, .tuner = 0, .svhs = 2, .gpiomask = 15, .muxsel = { 2, 3, 1, 1}, .audiomux = { 13, 4, 11, 7, 0, 0}, .needs_tvaudio = 1, .pll = PLL_28, .tuner_type = -1, .has_radio = 1, .audio_hook = avermedia_tvphone_audio, },{ .name = "ProVideo PV951", /* pic16c54 */ .video_inputs = 3, .audio_inputs = 1, .tuner = 0, .svhs = 2, .gpiomask = 0, .muxsel = { 2, 3, 1, 1}, .audiomux = { 0, 0, 0, 0, 0}, .needs_tvaudio = 1, .no_msp34xx = 1, .pll = PLL_28, .tuner_type = 1, },{ .name = "Little OnAir TV", .video_inputs = 3, .audio_inputs = 1, .tuner = 0, .svhs = 2, .gpiomask = 0xe00b, .muxsel = {2, 3, 1, 1}, .audiomux = {0xff9ff6, 0xff9ff6, 0xff1ff7, 0, 0xff3ffc}, .no_msp34xx = 1, .tuner_type = -1, },{ /* ---- card 0x2c ---------------------------------- */ .name = "Sigma TVII-FM", .video_inputs = 2, .audio_inputs = 1, .tuner = 0, .svhs = -1, .gpiomask = 3, .muxsel = {2, 3, 1, 1}, .audiomux = {1, 1, 0, 2, 3}, .no_msp34xx = 1, .pll = PLL_NONE, .tuner_type = -1, },{ .name = "MATRIX-Vision MV-Delta 2", .video_inputs = 5, .audio_inputs = 1, .tuner = -1, .svhs = 3, .gpiomask = 0, .muxsel = { 2, 3, 1, 0, 0}, .audiomux = {0 }, .no_msp34xx = 1, .pll = PLL_28, .tuner_type = -1, },{ .name = "Zoltrix Genie TV/FM", .video_inputs = 3, .audio_inputs = 1, .tuner = 0, .svhs = 2, .gpiomask = 0xbcf03f, .muxsel = { 2, 3, 1, 1}, .audiomux = { 0xbc803f, 0xbc903f, 0xbcb03f, 0, 0xbcb03f}, .no_msp34xx = 1, .pll = PLL_28, .tuner_type = 21, },{ .name = "Terratec TV/Radio+", .video_inputs = 3, .audio_inputs = 1, .tuner = 0, .svhs = 2, .gpiomask = 0x70000, .muxsel = { 2, 3, 1, 1}, .audiomux = { 0x20000, 0x30000, 0x10000, 0, 0x40000, 0x20000 }, .needs_tvaudio = 1, .no_msp34xx = 1, .pll = PLL_35, .tuner_type = 1, .has_radio = 1, },{ /* ---- card 0x30 ---------------------------------- */ .name = "Askey CPH03x/ Dynalink Magic TView", .video_inputs = 3, .audio_inputs = 1, .tuner = 0, .svhs = 2, .gpiomask = 15, .muxsel = { 2, 3, 1, 1}, .audiomux = {2,0,0,0,1}, .needs_tvaudio = 1, .pll = PLL_28, .tuner_type = -1, },{ .name = "IODATA GV-BCTV3/PCI", .video_inputs = 3, .audio_inputs = 1, .tuner = 0, .svhs = 2, .gpiomask = 0x010f00, .muxsel = {2, 3, 0, 0}, .audiomux = {0x10000, 0, 0x10000, 0, 0, 0}, .no_msp34xx = 1, .pll = PLL_28, .tuner_type = TUNER_ALPS_TSHC6_NTSC, .audio_hook = gvbctv3pci_audio, },{ .name = "Prolink PV-BT878P+4E / PixelView PlayTV PAK / Lenco MXTV-9578 CP", .video_inputs = 5, .audio_inputs = 1, .tuner = 0, .svhs = 3, .gpiomask = 0xAA0000, .muxsel = { 2,3,1,1,-1 }, .digital_mode = DIGITAL_MODE_CAMERA, .audiomux = { 0x20000, 0, 0x80000, 0x80000, 0xa8000, 0x46000 }, .no_msp34xx = 1, .pll = PLL_28, .tuner_type = TUNER_PHILIPS_PAL_I, /* GPIO wiring: (different from Rev.4C !) GPIO17: U4.A0 (first hef4052bt) GPIO19: U4.A1 GPIO20: U5.A1 (second hef4052bt) GPIO21: U4.nEN GPIO22: BT832 Reset Line GPIO23: A5,A0, U5,nEN Note: At i2c=0x8a is a Bt832 chip, which changes to 0x88 after being reset via GPIO22 */ },{ .name = "Eagle Wireless Capricorn2 (bt878A)", .video_inputs = 4, .audio_inputs = 1, .tuner = 0, .svhs = 2, .gpiomask = 7, .muxsel = { 2, 0, 1, 1}, .audiomux = { 0, 1, 2, 3, 4}, .pll = PLL_28, .tuner_type = -1 /* TUNER_ALPS_TMDH2_NTSC */, },{ /* ---- card 0x34 ---------------------------------- */ /* David Härdeman <david@2gen.com> */ .name = "Pinnacle PCTV Studio Pro", .video_inputs = 4, .audio_inputs = 1, .tuner = 0, .svhs = 3, .gpiomask = 0x03000F, .muxsel = { 2, 3, 1, 1}, .audiomux = { 1, 0xd0001, 0, 0, 10}, /* sound path (5 sources): MUX1 (mask 0x03), Enable Pin 0x08 (0=enable, 1=disable) 0= ext. Audio IN 1= from MUX2 2= Mono TV sound from Tuner 3= not connected MUX2 (mask 0x30000): 0,2,3= from MSP34xx 1= FM stereo Radio from Tuner */ .needs_tvaudio = 1, .pll = PLL_28, .tuner_type = -1, },{ /* Claas Langbehn <claas@bigfoot.com>, Sven Grothklags <sven@upb.de> */ .name = "Typhoon TView RDS + FM Stereo / KNC1 TV Station RDS", .video_inputs = 3, .audio_inputs = 3, .tuner = 0, .svhs = 2, .gpiomask = 0x1c, .muxsel = { 2, 3, 1, 1}, .audiomux = { 0, 0, 0x10, 8, 4 }, .needs_tvaudio = 1, .pll = PLL_28, .tuner_type = TUNER_PHILIPS_PAL_I, .has_radio = 1, },{ /* Tim Röstermundt <rosterm@uni-muenster.de> in de.comp.os.unix.linux.hardware: options bttv card=0 pll=1 radio=1 gpiomask=0x18e0 audiomux=0x44c71f,0x44d71f,0,0x44d71f,0x44dfff options tuner type=5 */ .name = "Lifeview FlyVideo 2000 /FlyVideo A2/ Lifetec LT 9415 TV [LR90]", .video_inputs = 4, .audio_inputs = 1, .tuner = 0, .svhs = 2, .gpiomask = 0x18e0, .muxsel = { 2, 3, 1, 1}, .audiomux = { 0x0000,0x0800,0x1000,0x1000,0x18e0 }, /* For cards with tda9820/tda9821: 0x0000: Tuner normal stereo 0x0080: Tuner A2 SAP (second audio program = Zweikanalton) 0x0880: Tuner A2 stereo */ .pll = PLL_28, .tuner_type = -1, },{ /* Miguel Angel Alvarez <maacruz@navegalia.com> old Easy TV BT848 version (model CPH031) */ .name = "Askey CPH031/ BESTBUY Easy TV", .video_inputs = 4, .audio_inputs = 1, .tuner = 0, .svhs = 2, .gpiomask = 0xF, .muxsel = { 2, 3, 1, 0}, .audiomux = { 2, 0, 0, 0, 10}, .needs_tvaudio = 0, .pll = PLL_28, .tuner_type = TUNER_TEMIC_PAL, },{ /* ---- card 0x38 ---------------------------------- */ /* Gordon Heydon <gjheydon@bigfoot.com ('98) */ .name = "Lifeview FlyVideo 98FM LR50", .video_inputs = 4, .audio_inputs = 3, .tuner = 0, .svhs = 2, .gpiomask = 0x1800, .muxsel = { 2, 3, 1, 1}, .audiomux = { 0, 0x800, 0x1000, 0x1000, 0x1800, 0 }, .pll = PLL_28, .tuner_type = 5, },{ /* This is the ultimate cheapo capture card * just a BT848A on a small PCB! * Steve Hosgood <steve@equiinet.com> */ .name = "GrandTec 'Grand Video Capture' (Bt848)", .video_inputs = 2, .audio_inputs = 0, .tuner = -1, .svhs = 1, .gpiomask = 0, .muxsel = { 3, 1 }, .audiomux = { 0 }, .needs_tvaudio = 0, .no_msp34xx = 1, .pll = PLL_35, .tuner_type = -1, },{ /* Daniel Herrington <daniel.herrington@home.com> */ .name = "Askey CPH060/ Phoebe TV Master Only (No FM)", .video_inputs = 3, .audio_inputs = 1, .tuner = 0, .svhs = 2, .gpiomask = 0xe00, .muxsel = { 2, 3, 1, 1}, .audiomux = { 0x400, 0x400, 0x400, 0x400, 0x800, 0x400 }, .needs_tvaudio = 1, .pll = PLL_28, .tuner_type = TUNER_TEMIC_4036FY5_NTSC, },{ /* Matti Mottus <mottus@physic.ut.ee> */ .name = "Askey CPH03x TV Capturer", .video_inputs = 4, .audio_inputs = 1, .tuner = 0, .svhs = 2, .gpiomask = 0x03000F, .muxsel = { 2, 3, 1, 0}, .audiomux = { 2,0,0,0,1 }, .pll = PLL_28, .tuner_type = 0, },{ /* ---- card 0x3c ---------------------------------- */ /* Philip Blundell <philb@gnu.org> */ .name = "Modular Technology MM100PCTV", .video_inputs = 2, .audio_inputs = 2, .tuner = 0, .svhs = -1, .gpiomask = 11, .muxsel = { 2, 3, 1, 1}, .audiomux = { 2, 0, 0, 1, 8}, .pll = PLL_35, .tuner_type = TUNER_TEMIC_PAL, },{ /* Adrian Cox <adrian@humboldt.co.uk */ .name = "AG Electronics GMV1", .video_inputs = 2, .audio_inputs = 0, .tuner = -1, .svhs = 1, .gpiomask = 0xF, .muxsel = { 2, 2}, .audiomux = { }, .no_msp34xx = 1, .needs_tvaudio = 0, .pll = PLL_28, .tuner_type = -1, },{ /* Miguel Angel Alvarez <maacruz@navegalia.com> new Easy TV BT878 version (model CPH061) special thanks to Informatica Mieres for providing the card */ .name = "Askey CPH061/ BESTBUY Easy TV (bt878)", .video_inputs = 3, .audio_inputs = 2, .tuner = 0, .svhs = 2, .gpiomask = 0xFF, .muxsel = { 2, 3, 1, 0}, .audiomux = { 1, 0, 4, 4, 9}, .needs_tvaudio = 0, .pll = PLL_28, .tuner_type = TUNER_PHILIPS_PAL, },{ /* Lukas Gebauer <geby@volny.cz> */ .name = "ATI TV-Wonder", .video_inputs = 3, .audio_inputs = 1, .tuner = 0, .svhs = 2, .gpiomask = 0xf03f, .muxsel = { 2, 3, 1, 0 }, .audiomux = { 0xbffe, 0, 0xbfff, 0, 0xbffe}, .pll = PLL_28, .tuner_type = TUNER_TEMIC_4006FN5_MULTI_PAL, },{ /* ---- card 0x40 ---------------------------------- */ /* Lukas Gebauer <geby@volny.cz> */ .name = "ATI TV-Wonder VE", .video_inputs = 2, .audio_inputs = 1, .tuner = 0, .svhs = -1, .gpiomask = 1, .muxsel = { 2, 3, 0, 1}, .audiomux = { 0, 0, 1, 0, 0}, .no_msp34xx = 1, .pll = PLL_28, .tuner_type = TUNER_TEMIC_4006FN5_MULTI_PAL, },{ /* DeeJay <deejay@westel900.net (2000S) */ .name = "Lifeview FlyVideo 2000S LR90", .video_inputs = 3, .audio_inputs = 3, .tuner = 0, .svhs = 2, .gpiomask = 0x18e0, .muxsel = { 2, 3, 0, 1}, /* Radio changed from 1e80 to 0x800 to make FlyVideo2000S in .hu happy (gm)*/ /* -dk-???: set mute=0x1800 for tda9874h daughterboard */ .audiomux = { 0x0000,0x0800,0x1000,0x1000,0x1800, 0x1080 }, .audio_hook = fv2000s_audio, .no_msp34xx = 1, .no_tda9875 = 1, .needs_tvaudio = 1, .pll = PLL_28, .tuner_type = 5, },{ .name = "Terratec TValueRadio", .video_inputs = 3, .audio_inputs = 1, .tuner = 0, .svhs = 2, .gpiomask = 0xffff00, .muxsel = { 2, 3, 1, 1}, .audiomux = { 0x500, 0x500, 0x300, 0x900, 0x900}, .needs_tvaudio = 1, .pll = PLL_28, .tuner_type = TUNER_PHILIPS_PAL, .has_radio = 1, },{ /* TANAKA Kei <peg00625@nifty.com> */ .name = "IODATA GV-BCTV4/PCI", .video_inputs = 3, .audio_inputs = 1, .tuner = 0, .svhs = 2, .gpiomask = 0x010f00, .muxsel = {2, 3, 0, 0}, .audiomux = {0x10000, 0, 0x10000, 0, 0, 0}, .no_msp34xx = 1, .pll = PLL_28, .tuner_type = TUNER_SHARP_2U5JF5540_NTSC, .audio_hook = gvbctv3pci_audio, },{ /* ---- card 0x44 ---------------------------------- */ .name = "3Dfx VoodooTV FM (Euro), VoodooTV 200 (USA)", // try "insmod msp3400 simple=0" if you have // sound problems with this card. .video_inputs = 4, .audio_inputs = 1, .tuner = 0, .svhs = -1, .gpiomask = 0x4f8a00, // 0x100000: 1=MSP enabled (0=disable again) // 0x010000: Connected to "S0" on tda9880 (0=Pal/BG, 1=NTSC) .audiomux = {0x947fff, 0x987fff,0x947fff,0x947fff, 0x947fff}, // tvtuner, radio, external,internal, mute, stereo /* tuner, Composit, SVid, Composit-on-Svid-adapter*/ .muxsel = { 2, 3 ,0 ,1}, .tuner_type = TUNER_MT2032, .pll = PLL_28, .has_radio = 1, },{ /* Philip Blundell <pb@nexus.co.uk> */ .name = "Active Imaging AIMMS", .video_inputs = 1, .audio_inputs = 0, .tuner = -1, .tuner_type = -1, .pll = PLL_28, .muxsel = { 2 }, .gpiomask = 0 },{ /* Tomasz Pyra <hellfire@sedez.iq.pl> */ .name = "Prolink Pixelview PV-BT878P+ (Rev.4C,8E)", .video_inputs = 3, .audio_inputs = 4, .tuner = 0, .svhs = 2, .gpiomask = 15, .muxsel = { 2, 3, 1, 1}, .audiomux = { 0, 0, 11, 7, 13, 0}, // TV and Radio with same GPIO ! .needs_tvaudio = 1, .pll = PLL_28, .tuner_type = 25, /* GPIO wiring: GPIO0: U4.A0 (hef4052bt) GPIO1: U4.A1 GPIO2: U4.A1 (second hef4052bt) GPIO3: U4.nEN, U5.A0, A5.nEN GPIO8-15: vrd866b ? */ },{ .name = "Lifeview FlyVideo 98EZ (capture only) LR51", .video_inputs = 4, .audio_inputs = 0, .tuner = -1, .svhs = 2, .muxsel = { 2, 3, 1, 1}, // AV1, AV2, SVHS, CVid adapter on SVHS .pll = PLL_28, .no_msp34xx = 1, },{ /* ---- card 0x48 ---------------------------------- */ /* Dariusz Kowalewski <darekk@automex.pl> */ .name = "Prolink Pixelview PV-BT878P+9B (PlayTV Pro rev.9B FM+NICAM)", .video_inputs = 4, .audio_inputs = 1, .tuner = 0, .svhs = 2, .gpiomask = 0x3f, .muxsel = { 2, 3, 1, 1 }, .audiomux = { 0x01, 0x00, 0x03, 0x03, 0x09, 0x02 }, .needs_tvaudio = 1, .no_msp34xx = 1, .no_tda9875 = 1, .pll = PLL_28, .tuner_type = 5, .audio_hook = pvbt878p9b_audio, // Note: not all cards have stereo .has_radio = 1, // Note: not all cards have radio /* GPIO wiring: GPIO0: A0 hef4052 GPIO1: A1 hef4052 GPIO3: nEN hef4052 GPIO8-15: vrd866b GPIO20,22,23: R30,R29,R28 */ },{ /* Clay Kunz <ckunz@mail.arc.nasa.gov> */ /* you must jumper JP5 for the card to work */ .name = "Sensoray 311", .video_inputs = 5, .audio_inputs = 0, .tuner = -1, .svhs = 4, .gpiomask = 0, .muxsel = { 2, 3, 1, 0, 0}, .audiomux = { 0 }, .needs_tvaudio = 0, .tuner_type = -1, },{ /* Miguel Freitas <miguel@cetuc.puc-rio.br> */ .name = "RemoteVision MX (RV605)", .video_inputs = 16, .audio_inputs = 0, .tuner = -1, .svhs = -1, .gpiomask = 0x00, .gpiomask2 = 0x07ff, .muxsel = { 0x33, 0x13, 0x23, 0x43, 0xf3, 0x73, 0xe3, 0x03, 0xd3, 0xb3, 0xc3, 0x63, 0x93, 0x53, 0x83, 0xa3 }, .no_msp34xx = 1, .no_tda9875 = 1, .tuner_type = -1, .muxsel_hook = rv605_muxsel, },{ .name = "Powercolor MTV878/ MTV878R/ MTV878F", .video_inputs = 3, .audio_inputs = 2, .tuner = 0, .svhs = 2, .gpiomask = 0x1C800F, // Bit0-2: Audio select, 8-12:remote control 14:remote valid 15:remote reset .muxsel = { 2, 1, 1, }, .audiomux = { 0, 1, 2, 2, 4 }, .needs_tvaudio = 0, .tuner_type = TUNER_PHILIPS_PAL, .pll = PLL_28, .has_radio = 1, },{ /* ---- card 0x4c ---------------------------------- */ /* Masaki Suzuki <masaki@btree.org> */ .name = "Canopus WinDVR PCI (COMPAQ Presario 3524JP, 5112JP)", .video_inputs = 3, .audio_inputs = 1, .tuner = 0, .svhs = 2, .gpiomask = 0x140007, .muxsel = { 2, 3, 1, 1 }, .audiomux = { 0, 1, 2, 3, 4, 0 }, .tuner_type = TUNER_PHILIPS_NTSC, .audio_hook = windvr_audio, },{ .name = "GrandTec Multi Capture Card (Bt878)", .video_inputs = 4, .audio_inputs = 0, .tuner = -1, .svhs = -1, .gpiomask = 0, .muxsel = { 2, 3, 1, 0 }, .audiomux = { 0 }, .needs_tvaudio = 0, .no_msp34xx = 1, .pll = PLL_28, .tuner_type = -1, },{ .name = "Jetway TV/Capture JW-TV878-FBK, Kworld KW-TV878RF", .video_inputs = 4, .audio_inputs = 3, .tuner = 0, .svhs = 2, .gpiomask = 7, .muxsel = { 2, 3, 1, 1 }, // Tuner, SVid, SVHS, SVid to SVHS connector .audiomux = { 0 ,0 ,4, 4,4,4},// Yes, this tuner uses the same audio output for TV and FM radio! // This card lacks external Audio In, so we mute it on Ext. & Int. // The PCB can take a sbx1637/sbx1673, wiring unknown. // This card lacks PCI subsystem ID, sigh. // audiomux=1: lower volume, 2+3: mute // btwincap uses 0x80000/0x80003 .needs_tvaudio = 0, .no_msp34xx = 1, .pll = PLL_28, .tuner_type = 5, // Samsung TCPA9095PC27A (BG+DK), philips compatible, w/FM, stereo and // radio signal strength indicators work fine. .has_radio = 1, /* GPIO Info: GPIO0,1: HEF4052 A0,A1 GPIO2: HEF4052 nENABLE GPIO3-7: n.c. GPIO8-13: IRDC357 data0-5 (data6 n.c. ?) [chip not present on my card] GPIO14,15: ?? GPIO16-21: n.c. GPIO22,23: ?? ?? : mtu8b56ep microcontroller for IR (GPIO wiring unknown)*/ },{ /* Arthur Tetzlaff-Deas, DSP Design Ltd <software@dspdesign.com> */ .name = "DSP Design TCVIDEO", .video_inputs = 4, .svhs = -1, .muxsel = { 2, 3, 1, 0}, .pll = PLL_28, .tuner_type = -1, },{ /* ---- card 0x50 ---------------------------------- */ .name = "Hauppauge WinTV PVR", .video_inputs = 4, .audio_inputs = 1, .tuner = 0, .svhs = 2, .muxsel = { 2, 0, 1, 1}, .needs_tvaudio = 1, .pll = PLL_28, .tuner_type = -1, .gpiomask = 7, .audiomux = {7}, },{ .name = "IODATA GV-BCTV5/PCI", .video_inputs = 3, .audio_inputs = 1, .tuner = 0, .svhs = 2, .gpiomask = 0x0f0f80, .muxsel = {2, 3, 1, 0}, .audiomux = {0x030000, 0x010000, 0x030000, 0, 0x020000, 0}, .no_msp34xx = 1, .pll = PLL_28, .tuner_type = TUNER_PHILIPS_NTSC_M, .audio_hook = gvbctv3pci_audio, .has_radio = 1, },{ .name = "Osprey 100/150 (878)", /* 0x1(2|3)-45C6-C1 */ .video_inputs = 4, /* id-inputs-clock */ .audio_inputs = 0, .tuner = -1, .svhs = 3, .muxsel = { 3, 2, 0, 1 }, .pll = PLL_28, .tuner_type = -1, .no_msp34xx = 1, .no_tda9875 = 1, .no_tda7432 = 1, },{ .name = "Osprey 100/150 (848)", /* 0x04-54C0-C1 & older boards */ .video_inputs = 3, .audio_inputs = 0, .tuner = -1, .svhs = 2, .muxsel = { 2, 3, 1 }, .pll = PLL_28, .tuner_type = -1, .no_msp34xx = 1, .no_tda9875 = 1, .no_tda7432 = 1, },{ /* ---- card 0x54 ---------------------------------- */ .name = "Osprey 101 (848)", /* 0x05-40C0-C1 */ .video_inputs = 2, .audio_inputs = 0, .tuner = -1, .svhs = 1, .muxsel = { 3, 1 }, .pll = PLL_28, .tuner_type = -1, .no_msp34xx = 1, .no_tda9875 = 1, .no_tda7432 = 1, },{ .name = "Osprey 101/151", /* 0x1(4|5)-0004-C4 */ .video_inputs = 1, .audio_inputs = 0, .tuner = -1, .svhs = -1, .muxsel = { 0 }, .pll = PLL_28, .tuner_type = -1, .no_msp34xx = 1, .no_tda9875 = 1, .no_tda7432 = 1, },{ .name = "Osprey 101/151 w/ svid", /* 0x(16|17|20)-00C4-C1 */ .video_inputs = 2, .audio_inputs = 0, .tuner = -1, .svhs = 1, .muxsel = { 0, 1 }, .pll = PLL_28, .tuner_type = -1, .no_msp34xx = 1, .no_tda9875 = 1, .no_tda7432 = 1, },{ .name = "Osprey 200/201/250/251", /* 0x1(8|9|E|F)-0004-C4 */ .video_inputs = 1, .audio_inputs = 1, .tuner = -1, .svhs = -1, .muxsel = { 0 }, .pll = PLL_28, .tuner_type = -1, .no_msp34xx = 1, .no_tda9875 = 1, .no_tda7432 = 1, },{ /* ---- card 0x58 ---------------------------------- */ .name = "Osprey 200/250", /* 0x1(A|B)-00C4-C1 */ .video_inputs = 2, .audio_inputs = 1, .tuner = -1, .svhs = 1, .muxsel = { 0, 1 }, .pll = PLL_28, .tuner_type = -1, .no_msp34xx = 1, .no_tda9875 = 1, .no_tda7432 = 1, },{ .name = "Osprey 210/220", /* 0x1(A|B)-04C0-C1 */ .video_inputs = 2, .audio_inputs = 1, .tuner = -1, .svhs = 1, .muxsel = { 2, 3 }, .pll = PLL_28, .tuner_type = -1, .no_msp34xx = 1, .no_tda9875 = 1, .no_tda7432 = 1, },{ .name = "Osprey 500", /* 500 */ .video_inputs = 2, .audio_inputs = 1, .tuner = -1, .svhs = 1, .muxsel = { 2, 3 }, .pll = PLL_28, .tuner_type = -1, .no_msp34xx = 1, .no_tda9875 = 1, .no_tda7432 = 1, },{ .name = "Osprey 540", /* 540 */ .video_inputs = 4, .audio_inputs = 1, .tuner = -1, #if 0 /* TODO ... */ .svhs = OSPREY540_SVID_ANALOG, .muxsel = { [OSPREY540_COMP_ANALOG] = 2, [OSPREY540_SVID_ANALOG] = 3, }, #endif .pll = PLL_28, .tuner_type = -1, .no_msp34xx = 1, .no_tda9875 = 1, .no_tda7432 = 1, #if 0 /* TODO ... */ .muxsel_hook = osprey_540_muxsel, .picture_hook = osprey_540_set_picture, #endif },{ /* ---- card 0x5C ---------------------------------- */ .name = "Osprey 2000", /* 2000 */ .video_inputs = 2, .audio_inputs = 1, .tuner = -1, .svhs = 1, .muxsel = { 2, 3 }, .pll = PLL_28, .tuner_type = -1, .no_msp34xx = 1, .no_tda9875 = 1, .no_tda7432 = 1, /* must avoid, conflicts with the bt860 */ },{ /* M G Berberich <berberic@forwiss.uni-passau.de> */ .name = "IDS Eagle", .video_inputs = 4, .audio_inputs = 0, .tuner = -1, .tuner_type = -1, .svhs = -1, .gpiomask = 0, .muxsel = { 0, 1, 2, 3 }, .muxsel_hook = eagle_muxsel, .no_msp34xx = 1, .no_tda9875 = 1, .pll = PLL_28, },{ .name = "Pinnacle PCTV Sat", .video_inputs = 2, .audio_inputs = 0, .svhs = 1, .tuner = -1, .tuner_type = -1, .no_msp34xx = 1, .no_tda9875 = 1, .no_tda7432 = 1, .gpiomask = 0x01, .audiomux = { 0, 0, 0, 0, 1 }, .muxsel = { 3, 0, 1, 2}, .needs_tvaudio = 0, .pll = PLL_28, },{ .name = "Formac ProTV II (bt878)", .video_inputs = 4, .audio_inputs = 1, .tuner = 0, .svhs = 3, .gpiomask = 2, // TV, Comp1, Composite over SVID con, SVID .muxsel = { 2, 3, 1, 1}, .audiomux = { 2, 2, 0, 0, 0 }, .pll = PLL_28, .has_radio = 1, .tuner_type = TUNER_PHILIPS_PAL, /* sound routing: GPIO=0x00,0x01,0x03: mute (?) 0x02: both TV and radio (tuner: FM1216/I) The card has onboard audio connectors labeled "cdrom" and "board", not soldered here, though unknown wiring. Card lacks: external audio in, pci subsystem id. */ },{ /* ---- card 0x60 ---------------------------------- */ .name = "MachTV", .video_inputs = 3, .audio_inputs = 1, .tuner = 0, .svhs = -1, .gpiomask = 7, .muxsel = { 2, 3, 1, 1}, .audiomux = { 0, 1, 2, 3, 4}, .needs_tvaudio = 1, .tuner_type = 5, .pll = 1, },{ .name = "Euresys Picolo", .video_inputs = 3, .audio_inputs = 0, .tuner = -1, .svhs = 2, .gpiomask = 0, .no_msp34xx = 1, .no_tda9875 = 1, .no_tda7432 = 1, .muxsel = { 2, 0, 1}, .pll = PLL_28, },{ /* Luc Van Hoeylandt <luc@e-magic.be> */ .name = "ProVideo PV150", /* 0x4f */ .video_inputs = 2, .audio_inputs = 0, .tuner = -1, .svhs = -1, .gpiomask = 0, .muxsel = { 2, 3 }, .audiomux = { 0 }, .needs_tvaudio = 0, .no_msp34xx = 1, .pll = PLL_28, .tuner_type = -1, },{ /* Hiroshi Takekawa <sian@big.or.jp> */ /* This card lacks subsystem ID */ .name = "AD-TVK503", /* 0x63 */ .video_inputs = 4, .audio_inputs = 1, .tuner = 0, .svhs = 2, .gpiomask = 0x001e8007, .muxsel = { 2, 3, 1, 0 }, /* Tuner, Radio, external, internal, off, on */ .audiomux = { 0x08, 0x0f, 0x0a, 0x08, 0x0f, 0x08 }, .needs_tvaudio = 0, .no_msp34xx = 1, .pll = PLL_28, .tuner_type = 2, .audio_hook = adtvk503_audio, },{ /* ---- card 0x64 ---------------------------------- */ .name = "Hercules Smart TV Stereo", .video_inputs = 4, .audio_inputs = 1, .tuner = 0, .svhs = 2, .gpiomask = 0x00, .muxsel = { 2, 3, 1, 1 }, .needs_tvaudio = 1, .no_msp34xx = 1, .pll = PLL_28, .tuner_type = 5, /* Notes: - card lacks subsystem ID - stereo variant w/ daughter board with tda9874a @0xb0 - Audio Routing: always from tda9874 independent of GPIO (?) external line in: unknown - Other chips: em78p156elp @ 0x96 (probably IR remote control) hef4053 (instead 4052) for unknown function */ },{ .name = "Pace TV & Radio Card", .video_inputs = 4, .audio_inputs = 1, .tuner = 0, .svhs = 2, .muxsel = { 2, 3, 1, 1}, // Tuner, CVid, SVid, CVid over SVid connector .gpiomask = 0, .no_tda9875 = 1, .no_tda7432 = 1, .tuner_type = 1, .has_radio = 1, .pll = PLL_28, /* Bt878, Bt832, FI1246 tuner; no pci subsystem id only internal line out: (4pin header) RGGL Radio must be decoded by msp3410d (not routed through)*/ // .digital_mode = DIGITAL_MODE_CAMERA, // todo! },{ /* Chris Willing <chris@vislab.usyd.edu.au> */ .name = "IVC-200", .video_inputs = 1, .audio_inputs = 0, .tuner = -1, .tuner_type = -1, .svhs = -1, .gpiomask = 0xdf, .muxsel = { 2 }, .pll = PLL_28, },{ .name = "Grand X-Guard / Trust 814PCI", .video_inputs = 16, .audio_inputs = 0, .tuner = -1, .svhs = -1, .tuner_type = 4, .gpiomask2 = 0xff, .muxsel = { 2,2,2,2, 3,3,3,3, 1,1,1,1, 0,0,0,0 }, .muxsel_hook = xguard_muxsel, .no_msp34xx = 1, .no_tda9875 = 1, .no_tda7432 = 1, .pll = PLL_28, },{ /* ---- card 0x68 ---------------------------------- */ .name = "Nebula Electronics DigiTV", .video_inputs = 0, .audio_inputs = 0, .svhs = -1, .muxsel = { 2, 3, 1, 0}, .needs_tvaudio = 0, .no_msp34xx = 1, .no_tda9875 = 1, .no_tda7432 = 1, .pll = PLL_28, .tuner_type = -1, },{ /* Jorge Boncompte - DTI2 <jorge@dti2.net> */ .name = "ProVideo PV143", .video_inputs = 4, .audio_inputs = 0, .tuner = -1, .svhs = -1, .gpiomask = 0, .muxsel = { 2, 3, 1, 0 }, .audiomux = { 0 }, .needs_tvaudio = 0, .no_msp34xx = 1, .pll = PLL_28, .tuner_type = -1, },{ /* M.Klahr@phytec.de */ .name = "PHYTEC VD-009-X1 MiniDIN (bt878)", .video_inputs = 4, .audio_inputs = 0, .tuner = -1, /* card has no tuner */ .svhs = 3, .gpiomask = 0x00, .muxsel = { 2, 3, 1, 0}, .audiomux = { 0, 0, 0, 0, 0, 0 }, /* card has no audio */ .needs_tvaudio = 1, .pll = PLL_28, .tuner_type = -1, },{ .name = "PHYTEC VD-009-X1 Combi (bt878)", .video_inputs = 4, .audio_inputs = 0, .tuner = -1, /* card has no tuner */ .svhs = 3, .gpiomask = 0x00, .muxsel = { 2, 3, 1, 1}, .audiomux = { 0, 0, 0, 0, 0, 0 }, /* card has no audio */ .needs_tvaudio = 1, .pll = PLL_28, .tuner_type = -1, },{ /* ---- card 0x6c ---------------------------------- */ .name = "PHYTEC VD-009 MiniDIN (bt878)", .video_inputs = 10, .audio_inputs = 0, .tuner = -1, /* card has no tuner */ .svhs = 9, .gpiomask = 0x00, .gpiomask2 = 0x03, /* gpiomask2 defines the bits used to switch audio via the upper nibble of muxsel. here: used for xternal video-mux */ .muxsel = { 0x02, 0x12, 0x22, 0x32, 0x03, 0x13, 0x23, 0x33, 0x01, 0x00 }, .audiomux = { 0, 0, 0, 0, 0, 0 }, /* card has no audio */ .needs_tvaudio = 1, .pll = PLL_28, .tuner_type = -1, },{ .name = "PHYTEC VD-009 Combi (bt878)", .video_inputs = 10, .audio_inputs = 0, .tuner = -1, /* card has no tuner */ .svhs = 9, .gpiomask = 0x00, .gpiomask2 = 0x03, /* gpiomask2 defines the bits used to switch audio via the upper nibble of muxsel. here: used for xternal video-mux */ .muxsel = { 0x02, 0x12, 0x22, 0x32, 0x03, 0x13, 0x23, 0x33, 0x01, 0x01 }, .audiomux = { 0, 0, 0, 0, 0, 0 }, /* card has no audio */ .needs_tvaudio = 1, .pll = PLL_28, .tuner_type = -1, }}; const unsigned int bttv_num_tvcards = ARRAY_SIZE(bttv_tvcards); /* ----------------------------------------------------------------------- */ static unsigned char eeprom_data[256]; /* * identify card */ void __devinit bttv_idcard(struct bttv *btv) { unsigned int gpiobits; int i,type; unsigned short tmp; /* read PCI subsystem ID */ pci_read_config_word(btv->dev, PCI_SUBSYSTEM_ID, &tmp); btv->cardid = tmp << 16; pci_read_config_word(btv->dev, PCI_SUBSYSTEM_VENDOR_ID, &tmp); btv->cardid |= tmp; if (0 != btv->cardid && 0xffffffff != btv->cardid) { /* look for the card */ for (type = -1, i = 0; cards[i].id != 0; i++) if (cards[i].id == btv->cardid) type = i; if (type != -1) { /* found it */ printk(KERN_INFO "bttv%d: detected: %s [card=%d], " "PCI subsystem ID is %04x:%04x\n", btv->nr,cards[type].name,cards[type].cardnr, btv->cardid & 0xffff, (btv->cardid >> 16) & 0xffff); btv->type = cards[type].cardnr; } else { /* 404 */ printk(KERN_INFO "bttv%d: subsystem: %04x:%04x (UNKNOWN)\n", btv->nr, btv->cardid & 0xffff, (btv->cardid >> 16) & 0xffff); printk(KERN_DEBUG "please mail id, board name and " "the correct card= insmod option to kraxel@bytesex.org\n"); } } /* let the user override the autodetected type */ if (card[btv->nr] < bttv_num_tvcards) btv->type=card[btv->nr]; /* print which card config we are using */ printk(KERN_INFO "bttv%d: using: %s [card=%d,%s]\n",btv->nr, bttv_tvcards[btv->type].name, btv->type, card[btv->nr] < bttv_num_tvcards ? "insmod option" : "autodetected"); /* overwrite gpio stuff ?? */ if (UNSET == audioall && UNSET == audiomux[0]) return; if (UNSET != audiomux[0]) { gpiobits = 0; for (i = 0; i < 5; i++) { bttv_tvcards[btv->type].audiomux[i] = audiomux[i]; gpiobits |= audiomux[i]; } } else { gpiobits = audioall; for (i = 0; i < 5; i++) { bttv_tvcards[btv->type].audiomux[i] = audioall; } } bttv_tvcards[btv->type].gpiomask = (UNSET != gpiomask) ? gpiomask : gpiobits; printk(KERN_INFO "bttv%d: gpio config override: mask=0x%x, mux=", btv->nr,bttv_tvcards[btv->type].gpiomask); for (i = 0; i < 5; i++) { printk("%s0x%x", i ? "," : "", bttv_tvcards[btv->type].audiomux[i]); } printk("\n"); } /* * (most) board specific initialisations goes here */ /* Some Modular Technology cards have an eeprom, but no subsystem ID */ void identify_by_eeprom(struct bttv *btv, unsigned char eeprom_data[256]) { int type = -1; if (0 == strncmp(eeprom_data,"GET.MM20xPCTV",13)) type = BTTV_MODTEC_205; else if (0 == strncmp(eeprom_data+20,"Picolo",7)) type = BTTV_EURESYS_PICOLO; else if (eeprom_data[0] == 0x84 && eeprom_data[2]== 0) type = BTTV_HAUPPAUGE; /* old bt848 */ if (-1 != type) { btv->type = type; printk("bttv%d: detected by eeprom: %s [card=%d]\n", btv->nr, bttv_tvcards[btv->type].name, btv->type); } } static void flyvideo_gpio(struct bttv *btv) { int gpio,outbits,has_remote,has_radio,is_capture_only,is_lr90,has_tda9820_tda9821; int tuner=-1,ttype; outbits = btread(BT848_GPIO_OUT_EN); btwrite(0x00, BT848_GPIO_OUT_EN); udelay(8); // without this we would see the 0x1800 mask gpio=btread(BT848_GPIO_DATA); btwrite(outbits, BT848_GPIO_OUT_EN); // all cards provide GPIO info, some have an additional eeprom // LR50: GPIO coding can be found lower right CP1 .. CP9 // CP9=GPIO23 .. CP1=GPIO15; when OPEN, the corresponding GPIO reads 1. // GPIO14-12: n.c. // LR90: GP9=GPIO23 .. GP1=GPIO15 (right above the bt878) // lowest 3 bytes are remote control codes (no handshake needed) // xxxFFF: No remote control chip soldered // xxxF00(LR26/LR50), xxxFE0(LR90): Remote control chip (LVA001 or CF45) soldered // Note: Some bits are Audio_Mask ! ttype=(gpio&0x0f0000)>>16; switch(ttype) { case 0x0: tuner=2; // NTSC, e.g. TPI8NSR11P break; case 0x2: tuner=39;// LG NTSC (newer TAPC series) TAPC-H701P break; case 0x4: tuner=5; // Philips PAL TPI8PSB02P, TPI8PSB12P, TPI8PSB12D or FI1216, FM1216 break; case 0x6: tuner=37; // LG PAL (newer TAPC series) TAPC-G702P break; case 0xC: tuner=3; // Philips SECAM(+PAL) FQ1216ME or FI1216MF break; default: printk(KERN_INFO "bttv%d: FlyVideo_gpio: unknown tuner type.\n", btv->nr); } has_remote = gpio & 0x800000; has_radio = gpio & 0x400000; // unknown 0x200000; // unknown2 0x100000; is_capture_only = !(gpio & 0x008000); //GPIO15 has_tda9820_tda9821 = !(gpio & 0x004000); is_lr90 = !(gpio & 0x002000); // else LR26/LR50 (LR38/LR51 f. capture only) // gpio & 0x001000 // output bit for audio routing if(is_capture_only) tuner=4; // No tuner present printk(KERN_INFO "bttv%d: FlyVideo Radio=%s RemoteControl=%s Tuner=%d gpio=0x%06x\n", btv->nr, has_radio? "yes":"no ", has_remote? "yes":"no ", tuner, gpio); printk(KERN_INFO "bttv%d: FlyVideo LR90=%s tda9821/tda9820=%s capture_only=%s\n", btv->nr, is_lr90?"yes":"no ", has_tda9820_tda9821?"yes":"no ", is_capture_only?"yes":"no "); if(tuner!= -1) // only set if known tuner autodetected, else let insmod option through btv->tuner_type = tuner; btv->has_radio = has_radio; // LR90 Audio Routing is done by 2 hef4052, so Audio_Mask has 4 bits: 0x001c80 // LR26/LR50 only has 1 hef4052, Audio_Mask 0x000c00 // Audio options: from tuner, from tda9821/tda9821(mono,stereo,sap), from tda9874, ext., mute if(has_tda9820_tda9821) btv->audio_hook = lt9415_audio; //todo: if(has_tda9874) btv->audio_hook = fv2000s_audio; } int miro_tunermap[] = { 0,6,2,3, 4,5,6,0, 3,0,4,5, 5,2,16,1, 14,2,17,1, 4,1,4,3, 1,2,16,1, 4,4,4,4 }; int miro_fmtuner[] = { 0,0,0,0, 0,0,0,0, 0,0,0,0, 0,0,0,1, 1,1,1,1, 1,1,1,0, 0,0,0,0, 0,1,0,0 }; static void miro_pinnacle_gpio(struct bttv *btv) { int id,msp,gpio; char *info; btwrite(0,BT848_GPIO_OUT_EN); gpio = btread(BT848_GPIO_DATA); id = ((gpio>>10) & 63) -1; msp = bttv_I2CRead(btv, I2C_MSP3400, "MSP34xx"); if (id < 32) { btv->tuner_type = miro_tunermap[id]; if (0 == (gpio & 0x20)) { btv->has_radio = 1; if (!miro_fmtuner[id]) { btv->has_matchbox = 1; btv->mbox_we = (1<<6); btv->mbox_most = (1<<7); btv->mbox_clk = (1<<8); btv->mbox_data = (1<<9); btv->mbox_mask = (1<<6)|(1<<7)|(1<<8)|(1<<9); } } else { btv->has_radio = 0; } if (-1 != msp) { if (btv->type == BTTV_MIRO) btv->type = BTTV_MIROPRO; if (btv->type == BTTV_PINNACLE) btv->type = BTTV_PINNACLEPRO; } printk(KERN_INFO "bttv%d: miro: id=%d tuner=%d radio=%s stereo=%s\n", btv->nr, id+1, btv->tuner_type, !btv->has_radio ? "no" : (btv->has_matchbox ? "matchbox" : "fmtuner"), (-1 == msp) ? "no" : "yes"); } else { /* new cards with microtune tuner */ id = 63 - id; btv->has_radio = 0; switch (id) { case 1: info = "PAL / mono"; break; case 2: info = "PAL+SECAM / stereo"; btv->has_radio = 1; break; case 3: info = "NTSC / stereo"; btv->has_radio = 1; break; case 4: info = "PAL+SECAM / mono"; break; case 5: info = "NTSC / mono"; break; case 6: info = "NTSC / stereo"; break; default: info = "oops: unknown card"; break; } if (-1 != msp) btv->type = BTTV_PINNACLEPRO; printk(KERN_INFO "bttv%d: pinnacle/mt: id=%d info=\"%s\" radio=%s\n", btv->nr, id, info, btv->has_radio ? "yes" : "no"); btv->tuner_type = 33; btv->pinnacle_id = id; } } /* GPIO21 L: Buffer aktiv, H: Buffer inaktiv */ #define LM1882_SYNC_DRIVE 0x200000L static void init_ids_eagle(struct bttv *btv) { btwrite(0xFFFF37, BT848_GPIO_OUT_EN); btwrite(0x000000, BT848_GPIO_REG_INP); btwrite(0x200020, BT848_GPIO_DATA); /* flash strobe inverter ?! */ btwrite(0x200024, BT848_GPIO_DATA); /* switch sync drive off */ btor(LM1882_SYNC_DRIVE, BT848_GPIO_DATA); /* set BT848 muxel to 2 */ btaor((2)<<5, ~(2<<5), BT848_IFORM); } /* Muxsel helper for the IDS Eagle. * the eagles does not use the standard muxsel-bits but * has its own multiplexer */ static void eagle_muxsel(struct bttv *btv, unsigned int input) { btaor((2)<<5, ~(3<<5), BT848_IFORM); btaor((bttv_tvcards[btv->type].muxsel[input&7]&3), ~3, BT848_GPIO_DATA); #if 0 /* svhs */ /* wake chroma ADC */ btand(~BT848_ADC_C_SLEEP, BT848_ADC); /* set to YC video */ btor(BT848_CONTROL_COMP, BT848_E_CONTROL); btor(BT848_CONTROL_COMP, BT848_O_CONTROL); #else /* composite */ /* set chroma ADC to sleep */ btor(BT848_ADC_C_SLEEP, BT848_ADC); /* set to composite video */ btand(~BT848_CONTROL_COMP, BT848_E_CONTROL); btand(~BT848_CONTROL_COMP, BT848_O_CONTROL); #endif /* switch sync drive off */ btor(LM1882_SYNC_DRIVE, BT848_GPIO_DATA); } /* ----------------------------------------------------------------------- */ /* initialization part one -- before registering i2c bus */ void __devinit bttv_init_card1(struct bttv *btv) { switch (btv->type) { case BTTV_HAUPPAUGE: case BTTV_HAUPPAUGE878: boot_msp34xx(btv,5); break; case BTTV_VOODOOTV_FM: boot_msp34xx(btv,20); break; case BTTV_AVERMEDIA98: boot_msp34xx(btv,11); break; case BTTV_HAUPPAUGEPVR: pvr_boot(btv); break; } } /* initialization part two -- after registering i2c bus */ void __devinit bttv_init_card2(struct bttv *btv) { btv->tuner_type = -1; if (BTTV_UNKNOWN == btv->type) { bttv_readee(btv,eeprom_data,0xa0); identify_by_eeprom(btv,eeprom_data); } switch (btv->type) { case BTTV_MIRO: case BTTV_MIROPRO: case BTTV_PINNACLE: case BTTV_PINNACLEPRO: /* miro/pinnacle */ miro_pinnacle_gpio(btv); break; case BTTV_FLYVIDEO_98: case BTTV_MAXI: case BTTV_LIFE_FLYKIT: case BTTV_FLYVIDEO: case BTTV_TYPHOON_TVIEW: case BTTV_CHRONOS_VS2: case BTTV_FLYVIDEO_98FM: case BTTV_FLYVIDEO2000: case BTTV_FLYVIDEO98EZ: case BTTV_CONFERENCETV: case BTTV_LIFETEC_9415: flyvideo_gpio(btv); break; case BTTV_HAUPPAUGE: case BTTV_HAUPPAUGE878: case BTTV_HAUPPAUGEPVR: /* pick up some config infos from the eeprom */ bttv_readee(btv,eeprom_data,0xa0); hauppauge_eeprom(btv); break; case BTTV_AVERMEDIA98: case BTTV_AVPHONE98: bttv_readee(btv,eeprom_data,0xa0); avermedia_eeprom(btv); break; case BTTV_PXC200: init_PXC200(btv); break; case BTTV_VHX: btv->has_radio = 1; btv->has_matchbox = 1; btv->mbox_we = 0x20; btv->mbox_most = 0; btv->mbox_clk = 0x08; btv->mbox_data = 0x10; btv->mbox_mask = 0x38; break; case BTTV_VOBIS_BOOSTAR: case BTTV_TERRATV: terratec_active_radio_upgrade(btv); break; case BTTV_MAGICTVIEW061: if (btv->cardid == 0x3002144f) { btv->has_radio=1; printk("bttv%d: radio detected by subsystem id (CPH05x)\n",btv->nr); } break; case BTTV_STB2: if (btv->cardid == 0x3060121a) { /* Fix up entry for 3DFX VoodooTV 100, which is an OEM STB card variant. */ btv->has_radio=0; btv->tuner_type=TUNER_TEMIC_NTSC; } break; case BTTV_OSPREY1x0: case BTTV_OSPREY1x0_848: case BTTV_OSPREY101_848: case BTTV_OSPREY1x1: case BTTV_OSPREY1x1_SVID: case BTTV_OSPREY2xx: case BTTV_OSPREY2x0_SVID: case BTTV_OSPREY2x0: case BTTV_OSPREY500: case BTTV_OSPREY540: case BTTV_OSPREY2000: bttv_readee(btv,eeprom_data,0xa0); osprey_eeprom(btv); break; case BTTV_IDS_EAGLE: init_ids_eagle(btv); break; case BTTV_MODTEC_205: bttv_readee(btv,eeprom_data,0xa0); modtec_eeprom(btv); break; } /* pll configuration */ if (!(btv->id==848 && btv->revision==0x11)) { /* defaults from card list */ if (PLL_28 == bttv_tvcards[btv->type].pll) { btv->pll.pll_ifreq=28636363; btv->pll.pll_crystal=BT848_IFORM_XT0; } if (PLL_35 == bttv_tvcards[btv->type].pll) { btv->pll.pll_ifreq=35468950; btv->pll.pll_crystal=BT848_IFORM_XT1; } /* insmod options can override */ switch (pll[btv->nr]) { case 0: /* none */ btv->pll.pll_crystal = 0; btv->pll.pll_ifreq = 0; btv->pll.pll_ofreq = 0; break; case 1: /* 28 MHz */ case 28: btv->pll.pll_ifreq = 28636363; btv->pll.pll_ofreq = 0; btv->pll.pll_crystal = BT848_IFORM_XT0; break; case 2: /* 35 MHz */ case 35: btv->pll.pll_ifreq = 35468950; btv->pll.pll_ofreq = 0; btv->pll.pll_crystal = BT848_IFORM_XT1; break; } } btv->pll.pll_current = -1; /* tuner configuration (from card list / autodetect / insmod option) */ if (UNSET != bttv_tvcards[btv->type].tuner_type) if(UNSET == btv->tuner_type) btv->tuner_type = bttv_tvcards[btv->type].tuner_type; if (UNSET != tuner[btv->nr]) btv->tuner_type = tuner[btv->nr]; printk("bttv%d: using tuner=%d\n",btv->nr,btv->tuner_type); if (btv->pinnacle_id != UNSET) bttv_call_i2c_clients(btv,AUDC_CONFIG_PINNACLE, &btv->pinnacle_id); if (btv->tuner_type != UNSET) bttv_call_i2c_clients(btv,TUNER_SET_TYPE,&btv->tuner_type); btv->svhs = bttv_tvcards[btv->type].svhs; if (svhs[btv->nr] != UNSET) btv->svhs = svhs[btv->nr]; if (bttv_tvcards[btv->type].has_radio) btv->has_radio=1; if (bttv_tvcards[btv->type].audio_hook) btv->audio_hook=bttv_tvcards[btv->type].audio_hook; if (bttv_tvcards[btv->type].digital_mode == DIGITAL_MODE_CAMERA) { /* detect Bt832 chip for quartzsight digital camera */ if ((bttv_I2CRead(btv, I2C_BT832_ALT1, "Bt832") >=0) || (bttv_I2CRead(btv, I2C_BT832_ALT2, "Bt832") >=0)) boot_bt832(btv); } /* try to detect audio/fader chips */ if (!bttv_tvcards[btv->type].no_msp34xx && bttv_I2CRead(btv, I2C_MSP3400, "MSP34xx") >=0) { if (autoload) request_module("msp3400"); } if (bttv_tvcards[btv->type].msp34xx_alt && bttv_I2CRead(btv, I2C_MSP3400_ALT, "MSP34xx (alternate address)") >=0) { if (autoload) request_module("msp3400"); } if (!bttv_tvcards[btv->type].no_tda9875 && bttv_I2CRead(btv, I2C_TDA9875, "TDA9875") >=0) { if (autoload) request_module("tda9875"); } if (!bttv_tvcards[btv->type].no_tda7432 && bttv_I2CRead(btv, I2C_TDA7432, "TDA7432") >=0) { if (autoload) request_module("tda7432"); } if (bttv_tvcards[btv->type].needs_tvaudio) { if (autoload) request_module("tvaudio"); } /* tuner modules */ if (btv->pinnacle_id != UNSET) { if (autoload) request_module("tda9887"); } if (btv->tuner_type != UNSET) { if (autoload) request_module("tuner"); } } /* ----------------------------------------------------------------------- */ /* some hauppauge specific stuff */ static struct HAUPPAUGE_TUNER { int id; char *name; } hauppauge_tuner[] __devinitdata = { { TUNER_ABSENT, "" }, { TUNER_ABSENT, "External" }, { TUNER_ABSENT, "Unspecified" }, { TUNER_PHILIPS_PAL, "Philips FI1216" }, { TUNER_PHILIPS_SECAM, "Philips FI1216MF" }, { TUNER_PHILIPS_NTSC, "Philips FI1236" }, { TUNER_PHILIPS_PAL_I, "Philips FI1246" }, { TUNER_PHILIPS_PAL_DK,"Philips FI1256" }, { TUNER_PHILIPS_PAL, "Philips FI1216 MK2" }, { TUNER_PHILIPS_SECAM, "Philips FI1216MF MK2" }, { TUNER_PHILIPS_NTSC, "Philips FI1236 MK2" }, { TUNER_PHILIPS_PAL_I, "Philips FI1246 MK2" }, { TUNER_PHILIPS_PAL_DK,"Philips FI1256 MK2" }, { TUNER_TEMIC_NTSC, "Temic 4032FY5" }, { TUNER_TEMIC_PAL, "Temic 4002FH5" }, { TUNER_TEMIC_PAL_I, "Temic 4062FY5" }, { TUNER_PHILIPS_PAL, "Philips FR1216 MK2" }, { TUNER_PHILIPS_SECAM, "Philips FR1216MF MK2" }, { TUNER_PHILIPS_NTSC, "Philips FR1236 MK2" }, { TUNER_PHILIPS_PAL_I, "Philips FR1246 MK2" }, { TUNER_PHILIPS_PAL_DK,"Philips FR1256 MK2" }, { TUNER_PHILIPS_PAL, "Philips FM1216" }, { TUNER_PHILIPS_SECAM, "Philips FM1216MF" }, { TUNER_PHILIPS_NTSC, "Philips FM1236" }, { TUNER_PHILIPS_PAL_I, "Philips FM1246" }, { TUNER_PHILIPS_PAL_DK,"Philips FM1256" }, { TUNER_TEMIC_4036FY5_NTSC, "Temic 4036FY5" }, { TUNER_ABSENT, "Samsung TCPN9082D" }, { TUNER_ABSENT, "Samsung TCPM9092P" }, { TUNER_TEMIC_4006FH5_PAL, "Temic 4006FH5" }, { TUNER_ABSENT, "Samsung TCPN9085D" }, { TUNER_ABSENT, "Samsung TCPB9085P" }, { TUNER_ABSENT, "Samsung TCPL9091P" }, { TUNER_TEMIC_4039FR5_NTSC, "Temic 4039FR5" }, { TUNER_PHILIPS_FQ1216ME, "Philips FQ1216 ME" }, { TUNER_TEMIC_4066FY5_PAL_I, "Temic 4066FY5" }, { TUNER_ABSENT, "Philips TD1536" }, { TUNER_ABSENT, "Philips TD1536D" }, { TUNER_PHILIPS_NTSC, "Philips FMR1236" }, /* mono radio */ { TUNER_ABSENT, "Philips FI1256MP" }, { TUNER_ABSENT, "Samsung TCPQ9091P" }, { TUNER_TEMIC_4006FN5_MULTI_PAL, "Temic 4006FN5" }, { TUNER_TEMIC_4009FR5_PAL, "Temic 4009FR5" }, { TUNER_TEMIC_4046FM5, "Temic 4046FM5" }, { TUNER_TEMIC_4009FN5_MULTI_PAL_FM, "Temic 4009FN5" }, { TUNER_ABSENT, "Philips TD1536D_FH_44"}, { TUNER_LG_NTSC_FM, "LG TPI8NSR01F"}, { TUNER_LG_PAL_FM, "LG TPI8PSB01D"}, { TUNER_LG_PAL, "LG TPI8PSB11D"}, { TUNER_LG_PAL_I_FM, "LG TAPC-I001D"}, { TUNER_LG_PAL_I, "LG TAPC-I701D"} }; static void modtec_eeprom(struct bttv *btv) { if( strncmp(&(eeprom_data[0x1e]),"Temic 4066 FY5",14) ==0) { btv->tuner_type=TUNER_TEMIC_4066FY5_PAL_I; printk("bttv Modtec: Tuner autodetected %s\n", &eeprom_data[0x1e]); } else { printk("bttv Modtec: Unknown TunerString:%s\n", &eeprom_data[0x1e]); } } static void __devinit hauppauge_eeprom(struct bttv *btv) { unsigned int blk2,tuner,radio,model; if (eeprom_data[0] != 0x84 || eeprom_data[2] != 0) printk(KERN_WARNING "bttv%d: Hauppauge eeprom: invalid\n", btv->nr); /* Block 2 starts after len+3 bytes header */ blk2 = eeprom_data[1] + 3; /* decode + use some config infos */ model = eeprom_data[12] << 8 | eeprom_data[11]; tuner = eeprom_data[9]; radio = eeprom_data[blk2-1] & 0x01; if (tuner < ARRAY_SIZE(hauppauge_tuner)) btv->tuner_type = hauppauge_tuner[tuner].id; if (radio) btv->has_radio = 1; if (bttv_verbose) printk(KERN_INFO "bttv%d: Hauppauge eeprom: model=%d, " "tuner=%s (%d), radio=%s\n", btv->nr, model, hauppauge_tuner[tuner].name, btv->tuner_type, radio ? "yes" : "no"); } static int terratec_active_radio_upgrade(struct bttv *btv) { int freq; btv->has_radio = 1; btv->has_matchbox = 1; btv->mbox_we = 0x10; btv->mbox_most = 0x20; btv->mbox_clk = 0x08; btv->mbox_data = 0x04; btv->mbox_mask = 0x3c; btv->mbox_iow = 1 << 8; btv->mbox_ior = 1 << 9; btv->mbox_csel = 1 << 10; freq=88000/62.5; tea5757_write(btv, 5 * freq + 0x358); // write 0x1ed8 if (0x1ed8 == tea5757_read(btv)) { printk("bttv%d: Terratec Active Radio Upgrade found.\n", btv->nr); btv->has_radio = 1; btv->has_matchbox = 1; } else { btv->has_radio = 0; btv->has_matchbox = 0; } return 0; } /* ----------------------------------------------------------------------- */ /* * minimal bootstrap for the WinTV/PVR -- upload altera firmware. * * The hcwamc.rbf firmware file is on the Hauppauge driver CD. Have * a look at Pvr/pvr45xxx.EXE (self-extracting zip archive, can be * unpacked with unzip). */ #define PVR_GPIO_DELAY 10 #define BTTV_ALT_DATA 0x000001 #define BTTV_ALT_DCLK 0x100000 #define BTTV_ALT_NCONFIG 0x800000 static int __devinit pvr_altera_load(struct bttv *btv, u8 *micro, u32 microlen) { u32 n; u8 bits; int i; btwrite(BTTV_ALT_DATA|BTTV_ALT_DCLK|BTTV_ALT_NCONFIG, BT848_GPIO_OUT_EN); btwrite(0,BT848_GPIO_DATA); udelay(PVR_GPIO_DELAY); btwrite(BTTV_ALT_NCONFIG,BT848_GPIO_DATA); udelay(PVR_GPIO_DELAY); for (n = 0; n < microlen; n++) { bits = micro[n]; for ( i = 0 ; i < 8 ; i++ ) { btand(~BTTV_ALT_DCLK,BT848_GPIO_DATA); if (bits & 0x01) btor(BTTV_ALT_DATA,BT848_GPIO_DATA); else btand(~BTTV_ALT_DATA,BT848_GPIO_DATA); btor(BTTV_ALT_DCLK,BT848_GPIO_DATA); bits >>= 1; } } btand(~BTTV_ALT_DCLK,BT848_GPIO_DATA); udelay(PVR_GPIO_DELAY); /* begin Altera init loop (Not necessary,but doesn't hurt) */ for (i = 0 ; i < 30 ; i++) { btand(~BTTV_ALT_DCLK,BT848_GPIO_DATA); btor(BTTV_ALT_DCLK,BT848_GPIO_DATA); } btand(~BTTV_ALT_DCLK,BT848_GPIO_DATA); return 0; } #ifndef CONFIG_FW_LOADER /* old 2.4.x way -- via soundcore's mod_firmware_load */ static char *firm_altera = "/usr/lib/video4linux/hcwamc.rbf"; MODULE_PARM(firm_altera,"s"); MODULE_PARM_DESC(firm_altera,"WinTV/PVR firmware " "(driver CD => unzip pvr45xxx.exe => hcwamc.rbf)"); extern int mod_firmware_load(const char *fn, char **fp); int __devinit pvr_boot(struct bttv *btv) { u32 microlen; u8 *micro; int result; microlen = mod_firmware_load(firm_altera, (char**) µ); if (!microlen) { printk(KERN_WARNING "bttv%d: altera firmware not found [%s]\n", btv->nr, firm_altera); return -1; } printk(KERN_INFO "bttv%d: uploading altera firmware [%s] ...\n", btv->nr, firm_altera); result = pvr_altera_load(btv, micro, microlen); printk(KERN_INFO "bttv%d: ... upload %s\n", btv->nr, (result < 0) ? "failed" : "ok"); vfree(micro); return result; } #else /* new 2.5.x way -- via hotplug firmware loader */ int __devinit pvr_boot(struct bttv *btv) { const struct firmware *fw_entry; int rc; rc = request_firmware(&fw_entry, "hcwamc.rbf", pci_name(btv->dev)); if (rc != 0) { printk(KERN_WARNING "bttv%d: no altera firmware [via hotplug]\n", btv->nr); return rc; } rc = pvr_altera_load(btv, fw_entry->data, fw_entry->size); printk(KERN_INFO "bttv%d: altera firmware upload %s\n", btv->nr, (rc < 0) ? "failed" : "ok"); release_firmware(fw_entry); return rc; } #endif /* ----------------------------------------------------------------------- */ /* some osprey specific stuff */ static void __devinit osprey_eeprom(struct bttv *btv) { int i = 0; unsigned char *ee = eeprom_data; unsigned long serial = 0; if (btv->type == 0) { /* this might be an antique... check for MMAC label in eeprom */ if ((ee[0]=='M') && (ee[1]=='M') && (ee[2]=='A') && (ee[3]=='C')) { unsigned char checksum = 0; for (i =0; i<21; i++) checksum += ee[i]; if (checksum != ee[21]) return; btv->type = BTTV_OSPREY1x0_848; for (i = 12; i < 21; i++) serial *= 10, serial += ee[i] - '0'; } } else { unsigned short type; int offset = 4*16; for(; offset < 8*16; offset += 16) { unsigned short checksum = 0; /* verify the checksum */ for(i = 0; i<14; i++) checksum += ee[i+offset]; checksum = ~checksum; /* no idea why */ if ((((checksum>>8)&0x0FF) == ee[offset+14]) && ((checksum & 0x0FF) == ee[offset+15])) { break; } } if (offset >= 8*16) return; /* found a valid descriptor */ type = (ee[offset+4]<<8) | (ee[offset+5]); switch(type) { /* 848 based */ case 0x0004: btv->type = BTTV_OSPREY1x0_848; break; case 0x0005: btv->type = BTTV_OSPREY101_848; break; /* 878 based */ case 0x0012: case 0x0013: btv->type = BTTV_OSPREY1x0; break; case 0x0014: case 0x0015: btv->type = BTTV_OSPREY1x1; break; case 0x0016: case 0x0017: case 0x0020: btv->type = BTTV_OSPREY1x1_SVID; break; case 0x0018: case 0x0019: case 0x001E: case 0x001F: btv->type = BTTV_OSPREY2xx; break; case 0x001A: case 0x001B: btv->type = BTTV_OSPREY2x0_SVID; break; case 0x0040: btv->type = BTTV_OSPREY500; break; case 0x0050: case 0x0056: btv->type = BTTV_OSPREY540; /* bttv_osprey_540_init(btv); */ break; case 0x0060: case 0x0070: btv->type = BTTV_OSPREY2x0; //enable output on select control lines btwrite(0x000303, BT848_GPIO_OUT_EN); break; default: /* unknown...leave generic, but get serial # */ break; } serial = (ee[offset+6] << 24) | (ee[offset+7] << 16) | (ee[offset+8] << 8) | (ee[offset+9]); } printk(KERN_INFO "bttv%d: osprey eeprom: card=%d name=%s serial=%ld\n", btv->nr, btv->type, bttv_tvcards[btv->type].name,serial); } /* ----------------------------------------------------------------------- */ /* AVermedia specific stuff, from bktr_card.c */ int tuner_0_table[] = { TUNER_PHILIPS_NTSC, TUNER_PHILIPS_PAL /* PAL-BG*/, TUNER_PHILIPS_PAL, TUNER_PHILIPS_PAL /* PAL-I*/, TUNER_PHILIPS_PAL, TUNER_PHILIPS_PAL, TUNER_PHILIPS_SECAM, TUNER_PHILIPS_SECAM, TUNER_PHILIPS_SECAM, TUNER_PHILIPS_PAL}; #if 0 int tuner_0_fm_table[] = { PHILIPS_FR1236_NTSC, PHILIPS_FR1216_PAL, PHILIPS_FR1216_PAL, PHILIPS_FR1216_PAL, PHILIPS_FR1216_PAL, PHILIPS_FR1216_PAL, PHILIPS_FR1236_SECAM, PHILIPS_FR1236_SECAM, PHILIPS_FR1236_SECAM, PHILIPS_FR1216_PAL}; #endif int tuner_1_table[] = { TUNER_TEMIC_NTSC, TUNER_TEMIC_PAL, TUNER_TEMIC_PAL, TUNER_TEMIC_PAL, TUNER_TEMIC_PAL, TUNER_TEMIC_PAL, TUNER_TEMIC_4012FY5, TUNER_TEMIC_4012FY5, //TUNER_TEMIC_SECAM TUNER_TEMIC_4012FY5, TUNER_TEMIC_PAL}; static void __devinit avermedia_eeprom(struct bttv *btv) { int tuner_make,tuner_tv_fm,tuner_format,tuner=0; tuner_make = (eeprom_data[0x41] & 0x7); tuner_tv_fm = (eeprom_data[0x41] & 0x18) >> 3; tuner_format = (eeprom_data[0x42] & 0xf0) >> 4; btv->has_remote = (eeprom_data[0x42] & 0x01); if (tuner_make == 0 || tuner_make == 2) if(tuner_format <=9) tuner = tuner_0_table[tuner_format]; if (tuner_make == 1) if(tuner_format <=9) tuner = tuner_1_table[tuner_format]; printk(KERN_INFO "bttv%d: Avermedia eeprom[0x%02x%02x]: tuner=", btv->nr,eeprom_data[0x41],eeprom_data[0x42]); if(tuner) { btv->tuner_type=tuner; printk("%d",tuner); } else printk("Unknown type"); printk(" radio:%s remote control:%s\n", tuner_tv_fm ? "yes" : "no", btv->has_remote ? "yes" : "no"); } /* used on Voodoo TV/FM (Voodoo 200), S0 wired to 0x10000 */ void bttv_tda9880_setnorm(struct bttv *btv, int norm) { // fix up our card entry if(norm==VIDEO_MODE_NTSC) { bttv_tvcards[BTTV_VOODOOTV_FM].audiomux[0]=0x957fff; bttv_tvcards[BTTV_VOODOOTV_FM].audiomux[4]=0x957fff; dprintk("bttv_tda9880_setnorm to NTSC\n"); } else { bttv_tvcards[BTTV_VOODOOTV_FM].audiomux[0]=0x947fff; bttv_tvcards[BTTV_VOODOOTV_FM].audiomux[4]=0x947fff; dprintk("bttv_tda9880_setnorm to PAL\n"); } // set GPIO according btaor(bttv_tvcards[btv->type].audiomux[btv->audio], ~bttv_tvcards[btv->type].gpiomask, BT848_GPIO_DATA); } /* * reset/enable the MSP on some Hauppauge cards * Thanks to Kyösti Mälkki (kmalkki@cc.hut.fi)! * * Hauppauge: pin 5 * Voodoo: pin 20 */ static void __devinit boot_msp34xx(struct bttv *btv, int pin) { int mask = (1 << pin); btaor(mask, ~mask, BT848_GPIO_OUT_EN); btaor(0, ~mask, BT848_GPIO_DATA); udelay(2500); btaor(mask, ~mask, BT848_GPIO_DATA); if (bttv_gpio) bttv_gpio_tracking(btv,"msp34xx"); if (bttv_verbose) printk(KERN_INFO "bttv%d: Hauppauge/Voodoo msp34xx: reset line " "init [%d]\n", btv->nr, pin); } static void __devinit boot_bt832(struct bttv *btv) { int outbits,databits,resetbit=0; switch (btv->type) { case BTTV_PXELVWPLTVPAK: resetbit = 0x400000; break; case BTTV_MODTEC_205: resetbit = 1<<9; break; default: BUG(); } request_module("bt832"); bttv_call_i2c_clients(btv, BT832_HEXDUMP, NULL); printk("bttv%d: Reset Bt832 [line=0x%x]\n",btv->nr,resetbit); btwrite(0, BT848_GPIO_DATA); outbits = btread(BT848_GPIO_OUT_EN); databits= btread(BT848_GPIO_DATA); btwrite(resetbit, BT848_GPIO_OUT_EN); udelay(5); btwrite(resetbit, BT848_GPIO_DATA); udelay(5); btwrite(0, BT848_GPIO_DATA); udelay(5); btwrite(outbits, BT848_GPIO_OUT_EN); btwrite(databits, BT848_GPIO_DATA); // bt832 on pixelview changes from i2c 0x8a to 0x88 after // being reset as above. So we must follow by this: bttv_call_i2c_clients(btv, BT832_REATTACH, NULL); } /* ----------------------------------------------------------------------- */ /* Imagenation L-Model PXC200 Framegrabber */ /* This is basically the same procedure as * used by Alessandro Rubini in his pxc200 * driver, but using BTTV functions */ static void __devinit init_PXC200(struct bttv *btv) { static int vals[] __devinitdata = { 0x08, 0x09, 0x0a, 0x0b, 0x0d, 0x0d, 0x01, 0x02, 0x03, 0x04, 0x05, 0x06, 0x00 }; unsigned int i; int tmp; u32 val; /* Initialise GPIO-connevted stuff */ btwrite(1<<13,BT848_GPIO_OUT_EN); /* Reset pin only */ btwrite(0,BT848_GPIO_DATA); udelay(3); btwrite(1<<13,BT848_GPIO_DATA); /* GPIO inputs are pulled up, so no need to drive * reset pin any longer */ btwrite(0,BT848_GPIO_OUT_EN); if (bttv_gpio) bttv_gpio_tracking(btv,"pxc200"); /* we could/should try and reset/control the AD pots? but right now we simply turned off the crushing. Without this the AGC drifts drifts remember the EN is reverse logic --> setting BT848_ADC_AGC_EN disable the AGC tboult@eecs.lehigh.edu */ btwrite(BT848_ADC_RESERVED|BT848_ADC_AGC_EN, BT848_ADC); /* Initialise MAX517 DAC */ printk(KERN_INFO "Setting DAC reference voltage level ...\n"); bttv_I2CWrite(btv,0x5E,0,0x80,1); /* Initialise 12C508 PIC */ /* The I2CWrite and I2CRead commmands are actually to the * same chips - but the R/W bit is included in the address * argument so the numbers are different */ printk(KERN_INFO "Initialising 12C508 PIC chip ...\n"); /* First of all, enable the clock line. This is used in the PXC200-F */ val = btread(BT848_GPIO_DMA_CTL); val |= BT848_GPIO_DMA_CTL_GPCLKMODE; btwrite(val, BT848_GPIO_DMA_CTL); /* Then, push to 0 the reset pin long enough to reset the * * device same as above for the reset line, but not the same * value sent to the GPIO-connected stuff * which one is the good one? */ btwrite( (1<<2), BT848_GPIO_OUT_EN); /* only the reset pin */ btwrite(0, BT848_GPIO_DATA); udelay(10); btwrite(1<<2, BT848_GPIO_DATA); for (i = 0; i < ARRAY_SIZE(vals); i++) { tmp=bttv_I2CWrite(btv,0x1E,0,vals[i],1); if (tmp != -1) { printk(KERN_INFO "I2C Write(%2.2x) = %i\nI2C Read () = %2.2x\n\n", vals[i],tmp,bttv_I2CRead(btv,0x1F,NULL)); } } printk(KERN_INFO "PXC200 Initialised.\n"); } /* ----------------------------------------------------------------------- */ /* Miro Pro radio stuff -- the tea5757 is connected to some GPIO ports */ /* * Copyright (c) 1999 Csaba Halasz <qgehali@uni-miskolc.hu> * This code is placed under the terms of the GNU General Public License * * Brutally hacked by Dan Sheridan <dan.sheridan@contact.org.uk> djs52 8/3/00 */ void bus_low(struct bttv *btv, int bit) { if (btv->mbox_ior) { btor(btv->mbox_ior | btv->mbox_iow | btv->mbox_csel, BT848_GPIO_DATA); udelay(5); } btand(~(bit), BT848_GPIO_DATA); udelay(5); if (btv->mbox_ior) { btand(~(btv->mbox_iow | btv->mbox_csel), BT848_GPIO_DATA); udelay(5); } } void bus_high(struct bttv *btv, int bit) { if (btv->mbox_ior) { btor(btv->mbox_ior | btv->mbox_iow | btv->mbox_csel, BT848_GPIO_DATA); udelay(5); } btor((bit), BT848_GPIO_DATA); udelay(5); if (btv->mbox_ior) { btand(~(btv->mbox_iow | btv->mbox_csel), BT848_GPIO_DATA); udelay(5); } } int bus_in(struct bttv *btv, int bit) { if (btv->mbox_ior) { btor(btv->mbox_ior | btv->mbox_iow | btv->mbox_csel, BT848_GPIO_DATA); udelay(5); btand(~(btv->mbox_ior | btv->mbox_csel), BT848_GPIO_DATA); udelay(5); } return btread(BT848_GPIO_DATA) & (bit); } /* TEA5757 register bits */ #define TEA_FREQ 0:14 #define TEA_BUFFER 15:15 #define TEA_SIGNAL_STRENGTH 16:17 #define TEA_PORT1 18:18 #define TEA_PORT0 19:19 #define TEA_BAND 20:21 #define TEA_BAND_FM 0 #define TEA_BAND_MW 1 #define TEA_BAND_LW 2 #define TEA_BAND_SW 3 #define TEA_MONO 22:22 #define TEA_ALLOW_STEREO 0 #define TEA_FORCE_MONO 1 #define TEA_SEARCH_DIRECTION 23:23 #define TEA_SEARCH_DOWN 0 #define TEA_SEARCH_UP 1 #define TEA_STATUS 24:24 #define TEA_STATUS_TUNED 0 #define TEA_STATUS_SEARCHING 1 /* Low-level stuff */ static int tea5757_read(struct bttv *btv) { unsigned long timeout; int value = 0; int i; /* better safe than sorry */ btaor((btv->mbox_clk | btv->mbox_we), ~btv->mbox_mask, BT848_GPIO_OUT_EN); if (btv->mbox_ior) { btor(btv->mbox_ior | btv->mbox_iow | btv->mbox_csel, BT848_GPIO_DATA); udelay(5); } if (bttv_gpio) bttv_gpio_tracking(btv,"tea5757 read"); bus_low(btv,btv->mbox_we); bus_low(btv,btv->mbox_clk); udelay(10); timeout= jiffies + HZ; // wait for DATA line to go low; error if it doesn't while (bus_in(btv,btv->mbox_data) && time_before(jiffies, timeout)) schedule(); if (bus_in(btv,btv->mbox_data)) { printk(KERN_WARNING "bttv%d: tea5757: read timeout\n",btv->nr); return -1; } dprintk("bttv%d: tea5757:",btv->nr); for(i = 0; i < 24; i++) { udelay(5); bus_high(btv,btv->mbox_clk); udelay(5); dprintk("%c",(bus_in(btv,btv->mbox_most) == 0)?'T':'-'); bus_low(btv,btv->mbox_clk); value <<= 1; value |= (bus_in(btv,btv->mbox_data) == 0)?0:1; /* MSB first */ dprintk("%c", (bus_in(btv,btv->mbox_most) == 0)?'S':'M'); } dprintk("\nbttv%d: tea5757: read 0x%X\n", btv->nr, value); return value; } static int tea5757_write(struct bttv *btv, int value) { int i; int reg = value; btaor(btv->mbox_clk | btv->mbox_we | btv->mbox_data, ~btv->mbox_mask, BT848_GPIO_OUT_EN); if (btv->mbox_ior) { btor(btv->mbox_ior | btv->mbox_iow | btv->mbox_csel, BT848_GPIO_DATA); udelay(5); } if (bttv_gpio) bttv_gpio_tracking(btv,"tea5757 write"); dprintk("bttv%d: tea5757: write 0x%X\n", btv->nr, value); bus_low(btv,btv->mbox_clk); bus_high(btv,btv->mbox_we); for(i = 0; i < 25; i++) { if (reg & 0x1000000) bus_high(btv,btv->mbox_data); else bus_low(btv,btv->mbox_data); reg <<= 1; bus_high(btv,btv->mbox_clk); udelay(10); bus_low(btv,btv->mbox_clk); udelay(10); } bus_low(btv,btv->mbox_we); /* unmute !!! */ return 0; } void tea5757_set_freq(struct bttv *btv, unsigned short freq) { dprintk("tea5757_set_freq %d\n",freq); tea5757_write(btv, 5 * freq + 0x358); /* add 10.7MHz (see docs) */ #if 0 /* breaks Miro PCTV */ value = tea5757_read(btv); dprintk("bttv%d: tea5757 readback=0x%x\n",btv->nr,value); #endif } /* ----------------------------------------------------------------------- */ /* winview */ void winview_audio(struct bttv *btv, struct video_audio *v, int set) { /* PT2254A programming Jon Tombs, jon@gte.esi.us.es */ int bits_out, loops, vol, data; if (!set) { /* Fixed by Leandro Lucarella <luca@linuxmendoza.org.ar (07/31/01) */ v->flags |= VIDEO_AUDIO_VOLUME; return; } /* 32 levels logarithmic */ vol = 32 - ((v->volume>>11)); /* units */ bits_out = (PT2254_DBS_IN_2>>(vol%5)); /* tens */ bits_out |= (PT2254_DBS_IN_10>>(vol/5)); bits_out |= PT2254_L_CHANNEL | PT2254_R_CHANNEL; data = btread(BT848_GPIO_DATA); data &= ~(WINVIEW_PT2254_CLK| WINVIEW_PT2254_DATA| WINVIEW_PT2254_STROBE); for (loops = 17; loops >= 0 ; loops--) { if (bits_out & (1<<loops)) data |= WINVIEW_PT2254_DATA; else data &= ~WINVIEW_PT2254_DATA; btwrite(data, BT848_GPIO_DATA); udelay(5); data |= WINVIEW_PT2254_CLK; btwrite(data, BT848_GPIO_DATA); udelay(5); data &= ~WINVIEW_PT2254_CLK; btwrite(data, BT848_GPIO_DATA); } data |= WINVIEW_PT2254_STROBE; data &= ~WINVIEW_PT2254_DATA; btwrite(data, BT848_GPIO_DATA); udelay(10); data &= ~WINVIEW_PT2254_STROBE; btwrite(data, BT848_GPIO_DATA); } /* ----------------------------------------------------------------------- */ /* mono/stereo control for various cards (which don't use i2c chips but */ /* connect something to the GPIO pins */ static void gvbctv3pci_audio(struct bttv *btv, struct video_audio *v, int set) { unsigned int con = 0; if (set) { btor(0x300, BT848_GPIO_OUT_EN); if (v->mode & VIDEO_SOUND_LANG1) con = 0x000; if (v->mode & VIDEO_SOUND_LANG2) con = 0x300; if (v->mode & VIDEO_SOUND_STEREO) con = 0x200; // if (v->mode & VIDEO_SOUND_MONO) // con = 0x100; btaor(con, ~0x300, BT848_GPIO_DATA); } else { v->mode = VIDEO_SOUND_STEREO | VIDEO_SOUND_LANG1 | VIDEO_SOUND_LANG2; } } /* * Mario Medina Nussbaum <medisoft@alohabbs.org.mx> * I discover that on BT848_GPIO_DATA address a byte 0xcce enable stereo, * 0xdde enables mono and 0xccd enables sap * * Petr Vandrovec <VANDROVE@vc.cvut.cz> * P.S.: At least mask in line above is wrong - GPIO pins 3,2 select * input/output sound connection, so both must be set for output mode. * * Looks like it's needed only for the "tvphone", the "tvphone 98" * handles this with a tda9840 * */ static void avermedia_tvphone_audio(struct bttv *btv, struct video_audio *v, int set) { int val = 0; if (set) { if (v->mode & VIDEO_SOUND_LANG1) /* SAP */ val = 0x02; if (v->mode & VIDEO_SOUND_STEREO) val = 0x01; if (val) { btaor(val, ~0x03, BT848_GPIO_DATA); if (bttv_gpio) bttv_gpio_tracking(btv,"avermedia"); } } else { v->mode = VIDEO_SOUND_MONO | VIDEO_SOUND_STEREO | VIDEO_SOUND_LANG1; return; } } /* Lifetec 9415 handling */ static void lt9415_audio(struct bttv *btv, struct video_audio *v, int set) { int val = 0; if (btread(BT848_GPIO_DATA) & 0x4000) { v->mode = VIDEO_SOUND_MONO; return; } if (set) { if (v->mode & VIDEO_SOUND_LANG2) /* A2 SAP */ val = 0x0080; if (v->mode & VIDEO_SOUND_STEREO) /* A2 stereo */ val = 0x0880; if ((v->mode & VIDEO_SOUND_LANG1) || (v->mode & VIDEO_SOUND_MONO)) val = 0; btaor(val, ~0x0880, BT848_GPIO_DATA); if (bttv_gpio) bttv_gpio_tracking(btv,"lt9415"); } else { /* autodetect doesn't work with this card :-( */ v->mode = VIDEO_SOUND_MONO | VIDEO_SOUND_STEREO | VIDEO_SOUND_LANG1 | VIDEO_SOUND_LANG2; return; } } // TDA9821 on TerraTV+ Bt848, Bt878 static void terratv_audio(struct bttv *btv, struct video_audio *v, int set) { unsigned int con = 0; if (set) { btor(0x180000, BT848_GPIO_OUT_EN); if (v->mode & VIDEO_SOUND_LANG2) con = 0x080000; if (v->mode & VIDEO_SOUND_STEREO) con = 0x180000; btaor(con, ~0x180000, BT848_GPIO_DATA); if (bttv_gpio) bttv_gpio_tracking(btv,"terratv"); } else { v->mode = VIDEO_SOUND_MONO | VIDEO_SOUND_STEREO | VIDEO_SOUND_LANG1 | VIDEO_SOUND_LANG2; } } static void winfast2000_audio(struct bttv *btv, struct video_audio *v, int set) { unsigned long val = 0; if (set) { /*btor (0xc32000, BT848_GPIO_OUT_EN);*/ if (v->mode & VIDEO_SOUND_MONO) /* Mono */ val = 0x420000; if (v->mode & VIDEO_SOUND_LANG1) /* Mono */ val = 0x420000; if (v->mode & VIDEO_SOUND_LANG2) /* SAP */ val = 0x410000; if (v->mode & VIDEO_SOUND_STEREO) /* Stereo */ val = 0x020000; if (val) { btaor(val, ~0x430000, BT848_GPIO_DATA); if (bttv_gpio) bttv_gpio_tracking(btv,"winfast2000"); } } else { v->mode = VIDEO_SOUND_MONO | VIDEO_SOUND_STEREO | VIDEO_SOUND_LANG1 | VIDEO_SOUND_LANG2; } } /* * Dariusz Kowalewski <darekk@automex.pl> * sound control for Prolink PV-BT878P+9B (PixelView PlayTV Pro FM+NICAM * revision 9B has on-board TDA9874A sound decoder). * * Note: There are card variants without tda9874a. Forcing the "stereo sound route" * will mute this cards. */ static void pvbt878p9b_audio(struct bttv *btv, struct video_audio *v, int set) { unsigned int val = 0; #if BTTV_VERSION_CODE > KERNEL_VERSION(0,8,0) if (btv->radio_user) return; #else if (btv->radio) return; #endif if (set) { if (v->mode & VIDEO_SOUND_MONO) { val = 0x01; } if ((v->mode & (VIDEO_SOUND_LANG1 | VIDEO_SOUND_LANG2)) || (v->mode & VIDEO_SOUND_STEREO)) { val = 0x02; } if (val) { btaor(val, ~0x03, BT848_GPIO_DATA); if (bttv_gpio) bttv_gpio_tracking(btv,"pvbt878p9b"); } } else { v->mode = VIDEO_SOUND_MONO | VIDEO_SOUND_STEREO | VIDEO_SOUND_LANG1 | VIDEO_SOUND_LANG2; } } /* * Dariusz Kowalewski <darekk@automex.pl> * sound control for FlyVideo 2000S (with tda9874 decoder) * based on pvbt878p9b_audio() - this is not tested, please fix!!! */ static void fv2000s_audio(struct bttv *btv, struct video_audio *v, int set) { unsigned int val = 0xffff; #if BTTV_VERSION_CODE > KERNEL_VERSION(0,8,0) if (btv->radio_user) return; #else if (btv->radio) return; #endif if (set) { if (v->mode & VIDEO_SOUND_MONO) { val = 0x0000; } if ((v->mode & (VIDEO_SOUND_LANG1 | VIDEO_SOUND_LANG2)) || (v->mode & VIDEO_SOUND_STEREO)) { val = 0x1080; //-dk-???: 0x0880, 0x0080, 0x1800 ... } if (val != 0xffff) { btaor(val, ~0x1800, BT848_GPIO_DATA); if (bttv_gpio) bttv_gpio_tracking(btv,"fv2000s"); } } else { v->mode = VIDEO_SOUND_MONO | VIDEO_SOUND_STEREO | VIDEO_SOUND_LANG1 | VIDEO_SOUND_LANG2; } } /* * sound control for Canopus WinDVR PCI * Masaki Suzuki <masaki@btree.org> */ static void windvr_audio(struct bttv *btv, struct video_audio *v, int set) { unsigned long val = 0; if (set) { if (v->mode & VIDEO_SOUND_MONO) val = 0x040000; if (v->mode & VIDEO_SOUND_LANG1) val = 0; if (v->mode & VIDEO_SOUND_LANG2) val = 0x100000; if (v->mode & VIDEO_SOUND_STEREO) val = 0; if (val) { btaor(val, ~0x140000, BT848_GPIO_DATA); if (bttv_gpio) bttv_gpio_tracking(btv,"windvr"); } } else { v->mode = VIDEO_SOUND_MONO | VIDEO_SOUND_STEREO | VIDEO_SOUND_LANG1 | VIDEO_SOUND_LANG2; } } /* * sound control for AD-TVK503 * Hiroshi Takekawa <sian@big.or.jp> */ static void adtvk503_audio(struct bttv *btv, struct video_audio *v, int set) { unsigned int con = 0xffffff; //btaor(0x1e0000, ~0x1e0000, BT848_GPIO_OUT_EN); if (set) { //btor(***, BT848_GPIO_OUT_EN); if (v->mode & VIDEO_SOUND_LANG1) con = 0x00000000; if (v->mode & VIDEO_SOUND_LANG2) con = 0x00180000; if (v->mode & VIDEO_SOUND_STEREO) con = 0x00000000; if (v->mode & VIDEO_SOUND_MONO) con = 0x00060000; if (con != 0xffffff) { btaor(con, ~0x1e0000, BT848_GPIO_DATA); if (bttv_gpio) bttv_gpio_tracking(btv, "adtvk503"); } } else { v->mode = VIDEO_SOUND_MONO | VIDEO_SOUND_STEREO | VIDEO_SOUND_LANG1 | VIDEO_SOUND_LANG2; } } /* RemoteVision MX (rv605) muxsel helper [Miguel Freitas] * * This is needed because rv605 don't use a normal multiplex, but a crosspoint * switch instead (CD22M3494E). This IC can have multiple active connections * between Xn (input) and Yn (output) pins. We need to clear any existing * connection prior to establish a new one, pulsing the STROBE pin. * * The board hardwire Y0 (xpoint) to MUX1 and MUXOUT to Yin. * GPIO pins are wired as: * GPIO[0:3] - AX[0:3] (xpoint) - P1[0:3] (microcontroler) * GPIO[4:6] - AY[0:2] (xpoint) - P1[4:6] (microcontroler) * GPIO[7] - DATA (xpoint) - P1[7] (microcontroler) * GPIO[8] - - P3[5] (microcontroler) * GPIO[9] - RESET (xpoint) - P3[6] (microcontroler) * GPIO[10] - STROBE (xpoint) - P3[7] (microcontroler) * GPINTR - - P3[4] (microcontroler) * * The microcontroler is a 80C32 like. It should be possible to change xpoint * configuration either directly (as we are doing) or using the microcontroler * which is also wired to I2C interface. I have no further info on the * microcontroler features, one would need to disassembly the firmware. * note: the vendor refused to give any information on this product, all * that stuff was found using a multimeter! :) */ static void rv605_muxsel(struct bttv *btv, unsigned int input) { /* reset all conections */ btaor(0x200,~0x200, BT848_GPIO_DATA); mdelay(1); btaor(0x000,~0x200, BT848_GPIO_DATA); mdelay(1); /* create a new conection */ btaor(0x080,~0x480, BT848_GPIO_DATA); btaor(0x480,~0x480, BT848_GPIO_DATA); mdelay(1); btaor(0x080,~0x480, BT848_GPIO_DATA); mdelay(1); } // The Grandtec X-Guard framegrabber card uses two Dual 4-channel // video multiplexers to provide up to 16 video inputs. These // multiplexers are controlled by the lower 8 GPIO pins of the // bt878. The multiplexers probably Pericom PI5V331Q or similar. // xxx0 is pin xxx of multiplexer U5, // yyy1 is pin yyy of multiplexer U2 #define ENA0 0x01 #define ENB0 0x02 #define ENA1 0x04 #define ENB1 0x08 #define IN10 0x10 #define IN00 0x20 #define IN11 0x40 #define IN01 0x80 static void xguard_muxsel(struct bttv *btv, unsigned int input) { static const int masks[] = { ENB0, ENB0|IN00, ENB0|IN10, ENB0|IN00|IN10, ENA0, ENA0|IN00, ENA0|IN10, ENA0|IN00|IN10, ENB1, ENB1|IN01, ENB1|IN11, ENB1|IN01|IN11, ENA1, ENA1|IN01, ENA1|IN11, ENA1|IN01|IN11, }; btwrite(masks[input%16], BT848_GPIO_DATA); } /* ----------------------------------------------------------------------- */ /* motherboard chipset specific stuff */ void __devinit bttv_check_chipset(void) { int pcipci_fail = 0; struct pci_dev *dev = NULL; if (pci_pci_problems & PCIPCI_FAIL) pcipci_fail = 1; if (pci_pci_problems & (PCIPCI_TRITON|PCIPCI_NATOMA|PCIPCI_VIAETBF)) triton1 = 1; if (pci_pci_problems & PCIPCI_VSFX) vsfx = 1; #ifdef PCIPCI_ALIMAGIK if (pci_pci_problems & PCIPCI_ALIMAGIK) latency = 0x0A; #endif #if 0 /* print which chipset we have */ while ((dev = pci_find_class(PCI_CLASS_BRIDGE_HOST << 8,dev))) printk(KERN_INFO "bttv: Host bridge is %s\n",pci_name(dev)); #endif /* print warnings about any quirks found */ if (triton1) printk(KERN_INFO "bttv: Host bridge needs ETBF enabled.\n"); if (vsfx) printk(KERN_INFO "bttv: Host bridge needs VSFX enabled.\n"); if (pcipci_fail) { printk(KERN_WARNING "bttv: BT848 and your chipset may not work together.\n"); if (UNSET == no_overlay) { printk(KERN_WARNING "bttv: going to disable overlay.\n"); no_overlay = 1; } } if (UNSET != latency) printk(KERN_INFO "bttv: pci latency fixup [%d]\n",latency); while ((dev = pci_find_device(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82441, dev))) { unsigned char b; pci_read_config_byte(dev, 0x53, &b); if (bttv_debug) printk(KERN_INFO "bttv: Host bridge: 82441FX Natoma, " "bufcon=0x%02x\n",b); } } int __devinit bttv_handle_chipset(struct bttv *btv) { unsigned char command; if (!triton1 && !vsfx && UNSET == latency) return 0; if (bttv_verbose) { if (triton1) printk(KERN_INFO "bttv%d: enabling ETBF (430FX/VP3 compatibilty)\n",btv->nr); if (vsfx && btv->id >= 878) printk(KERN_INFO "bttv%d: enabling VSFX\n",btv->nr); if (UNSET != latency) printk(KERN_INFO "bttv%d: setting pci timer to %d\n", btv->nr,latency); } if (btv->id < 878) { /* bt848 (mis)uses a bit in the irq mask for etbf */ if (triton1) btv->triton1 = BT848_INT_ETBF; } else { /* bt878 has a bit in the pci config space for it */ pci_read_config_byte(btv->dev, BT878_DEVCTRL, &command); if (triton1) command |= BT878_EN_TBFX; if (vsfx) command |= BT878_EN_VSFX; pci_write_config_byte(btv->dev, BT878_DEVCTRL, command); } if (UNSET != latency) pci_write_config_byte(btv->dev, PCI_LATENCY_TIMER, latency); return 0; } /* * Local variables: * c-basic-offset: 8 * End: */
Go to most recent revision | Compare with Previous | Blame | View Log