URL
https://opencores.org/ocsvn/or1k/or1k/trunk
Subversion Repositories or1k
[/] [or1k/] [trunk/] [linux/] [linux-2.4/] [drivers/] [message/] [fusion/] [lsi/] [mpi_cnfg.h] - Rev 1774
Go to most recent revision | Compare with Previous | Blame | View Log
/* * Copyright (c) 2000-2003 LSI Logic Corporation. * * * Name: MPI_CNFG.H * Title: MPI Config message, structures, and Pages * Creation Date: July 27, 2000 * * MPI_CNFG.H Version: 01.02.12 * * Version History * --------------- * * Date Version Description * -------- -------- ------------------------------------------------------ * 05-08-00 00.10.01 Original release for 0.10 spec dated 4/26/2000. * 06-06-00 01.00.01 Update version number for 1.0 release. * 06-08-00 01.00.02 Added _PAGEVERSION definitions for all pages. * Added FcPhLowestVersion, FcPhHighestVersion, Reserved2 * fields to FC_DEVICE_0 page, updated the page version. * Changed _FREE_RUNNING_CLOCK to _PACING_TRANSFERS in * SCSI_PORT_0, SCSI_DEVICE_0 and SCSI_DEVICE_1 pages * and updated the page versions. * Added _RESPONSE_ID_MASK definition to SCSI_PORT_1 * page and updated the page version. * Added Information field and _INFO_PARAMS_NEGOTIATED * definitionto SCSI_DEVICE_0 page. * 06-22-00 01.00.03 Removed batch controls from LAN_0 page and updated the * page version. * Added BucketsRemaining to LAN_1 page, redefined the * state values, and updated the page version. * Revised bus width definitions in SCSI_PORT_0, * SCSI_DEVICE_0 and SCSI_DEVICE_1 pages. * 06-30-00 01.00.04 Added MaxReplySize to LAN_1 page and updated the page * version. * Moved FC_DEVICE_0 PageAddress description to spec. * 07-27-00 01.00.05 Corrected the SubsystemVendorID and SubsystemID field * widths in IOC_0 page and updated the page version. * 11-02-00 01.01.01 Original release for post 1.0 work * Added Manufacturing pages, IO Unit Page 2, SCSI SPI * Port Page 2, FC Port Page 4, FC Port Page 5 * 11-15-00 01.01.02 Interim changes to match proposals * 12-04-00 01.01.03 Config page changes to match MPI rev 1.00.01. * 12-05-00 01.01.04 Modified config page actions. * 01-09-01 01.01.05 Added defines for page address formats. * Data size for Manufacturing pages 2 and 3 no longer * defined here. * Io Unit Page 2 size is fixed at 4 adapters and some * flags were changed. * SCSI Port Page 2 Device Settings modified. * New fields added to FC Port Page 0 and some flags * cleaned up. * Removed impedance flash from FC Port Page 1. * Added FC Port pages 6 and 7. * 01-25-01 01.01.06 Added MaxInitiators field to FcPortPage0. * 01-29-01 01.01.07 Changed some defines to make them 32 character unique. * Added some LinkType defines for FcPortPage0. * 02-20-01 01.01.08 Started using MPI_POINTER. * 02-27-01 01.01.09 Replaced MPI_CONFIG_PAGETYPE_SCSI_LUN with * MPI_CONFIG_PAGETYPE_RAID_VOLUME. * Added definitions and structures for IOC Page 2 and * RAID Volume Page 2. * 03-27-01 01.01.10 Added CONFIG_PAGE_FC_PORT_8 and CONFIG_PAGE_FC_PORT_9. * CONFIG_PAGE_FC_PORT_3 now supports persistent by DID. * Added VendorId and ProductRevLevel fields to * RAIDVOL2_IM_PHYS_ID struct. * Modified values for MPI_FCPORTPAGE0_FLAGS_ATTACH_ * defines to make them compatible to MPI version 1.0. * Added structure offset comments. * 04-09-01 01.01.11 Added some new defines for the PageAddress field and * removed some obsolete ones. * Added IO Unit Page 3. * Modified defines for Scsi Port Page 2. * Modified RAID Volume Pages. * 08-08-01 01.02.01 Original release for v1.2 work. * Added SepID and SepBus to RVP2 IMPhysicalDisk struct. * Added defines for the SEP bits in RVP2 VolumeSettings. * Modified the DeviceSettings field in RVP2 to use the * proper structure. * Added defines for SES, SAF-TE, and cross channel for * IOCPage2 CapabilitiesFlags. * Removed define for MPI_IOUNITPAGE2_FLAGS_RAID_DISABLE. * Removed define for * MPI_SCSIPORTPAGE2_PORT_FLAGS_PARITY_ENABLE. * Added define for MPI_CONFIG_PAGEATTR_RO_PERSISTENT. * 08-29-01 01.02.02 Fixed value for MPI_MANUFACTPAGE_DEVID_53C1035. * Added defines for MPI_FCPORTPAGE1_FLAGS_HARD_ALPA_ONLY * and MPI_FCPORTPAGE1_FLAGS_IMMEDIATE_ERROR_REPLY. * Removed MPI_SCSIPORTPAGE0_CAP_PACING_TRANSFERS, * MPI_SCSIDEVPAGE0_NP_PACING_TRANSFERS, and * MPI_SCSIDEVPAGE1_RP_PACING_TRANSFERS, and * MPI_SCSIDEVPAGE1_CONF_PPR_ALLOWED. * Added defines for MPI_SCSIDEVPAGE1_CONF_WDTR_DISALLOWED * and MPI_SCSIDEVPAGE1_CONF_SDTR_DISALLOWED. * Added OnBusTimerValue to CONFIG_PAGE_SCSI_PORT_1. * Added rejected bits to SCSI Device Page 0 Information. * Increased size of ALPA array in FC Port Page 2 by one * and removed a one byte reserved field. * 09-28-01 01.02.03 Swapped NegWireSpeedLow and NegWireSpeedLow in * CONFIG_PAGE_LAN_1 to match preferred 64-bit ordering. * Added structures for Manufacturing Page 4, IO Unit * Page 3, IOC Page 3, IOC Page 4, RAID Volume Page 0, and * RAID PhysDisk Page 0. * 10-04-01 01.02.04 Added define for MPI_CONFIG_PAGETYPE_RAID_PHYSDISK. * Modified some of the new defines to make them 32 * character unique. * Modified how variable length pages (arrays) are defined. * Added generic defines for hot spare pools and RAID * volume types. * 11-01-01 01.02.05 Added define for MPI_IOUNITPAGE1_DISABLE_IR. * 03-14-02 01.02.06 Added PCISlotNum field to CONFIG_PAGE_IOC_1 along with * related define, and bumped the page version define. * 05-31-02 01.02.07 Added a Flags field to CONFIG_PAGE_IOC_2_RAID_VOL in a * reserved byte and added a define. * Added define for * MPI_RAIDVOL0_STATUS_FLAG_VOLUME_INACTIVE. * Added new config page: CONFIG_PAGE_IOC_5. * Added MaxAliases, MaxHardAliases, and NumCurrentAliases * fields to CONFIG_PAGE_FC_PORT_0. * Added AltConnector and NumRequestedAliases fields to * CONFIG_PAGE_FC_PORT_1. * Added new config page: CONFIG_PAGE_FC_PORT_10. * 07-12-02 01.02.08 Added more MPI_MANUFACTPAGE_DEVID_ defines. * Added additional MPI_SCSIDEVPAGE0_NP_ defines. * Added more MPI_SCSIDEVPAGE1_RP_ defines. * Added define for * MPI_SCSIDEVPAGE1_CONF_EXTENDED_PARAMS_ENABLE. * Added new config page: CONFIG_PAGE_SCSI_DEVICE_3. * Modified MPI_FCPORTPAGE5_FLAGS_ defines. * 09-16-02 01.02.09 Added MPI_SCSIDEVPAGE1_CONF_FORCE_PPR_MSG define. * 11-15-02 01.02.10 Added ConnectedID defines for CONFIG_PAGE_SCSI_PORT_0. * Added more Flags defines for CONFIG_PAGE_FC_PORT_1. * Added more Flags defines for CONFIG_PAGE_FC_DEVICE_0. * 04-01-03 01.02.11 Added RR_TOV field and additional Flags defines for * CONFIG_PAGE_FC_PORT_1. * Added define MPI_FCPORTPAGE5_FLAGS_DISABLE to disable * an alias. * Added more device id defines. * 06-26-03 01.02.12 Added MPI_IOUNITPAGE1_IR_USE_STATIC_VOLUME_ID define. * Added TargetConfig and IDConfig fields to * CONFIG_PAGE_SCSI_PORT_1. * Added more PortFlags defines for CONFIG_PAGE_SCSI_PORT_2 * to control DV. * Added more Flags defines for CONFIG_PAGE_FC_PORT_1. * In CONFIG_PAGE_FC_DEVICE_0, replaced Reserved1 field * with ADISCHardALPA. * Added MPI_FC_DEVICE_PAGE0_PROT_FCP_RETRY define. * -------------------------------------------------------------------------- */ #ifndef MPI_CNFG_H #define MPI_CNFG_H /***************************************************************************** * * C o n f i g M e s s a g e a n d S t r u c t u r e s * *****************************************************************************/ typedef struct _CONFIG_PAGE_HEADER { U8 PageVersion; /* 00h */ U8 PageLength; /* 01h */ U8 PageNumber; /* 02h */ U8 PageType; /* 03h */ } fCONFIG_PAGE_HEADER, MPI_POINTER PTR_CONFIG_PAGE_HEADER, ConfigPageHeader_t, MPI_POINTER pConfigPageHeader_t; typedef union _CONFIG_PAGE_HEADER_UNION { ConfigPageHeader_t Struct; U8 Bytes[4]; U16 Word16[2]; U32 Word32; } ConfigPageHeaderUnion, MPI_POINTER pConfigPageHeaderUnion, fCONFIG_PAGE_HEADER_UNION, MPI_POINTER PTR_CONFIG_PAGE_HEADER_UNION; /**************************************************************************** * PageType field values ****************************************************************************/ #define MPI_CONFIG_PAGEATTR_READ_ONLY (0x00) #define MPI_CONFIG_PAGEATTR_CHANGEABLE (0x10) #define MPI_CONFIG_PAGEATTR_PERSISTENT (0x20) #define MPI_CONFIG_PAGEATTR_RO_PERSISTENT (0x30) #define MPI_CONFIG_PAGEATTR_MASK (0xF0) #define MPI_CONFIG_PAGETYPE_IO_UNIT (0x00) #define MPI_CONFIG_PAGETYPE_IOC (0x01) #define MPI_CONFIG_PAGETYPE_BIOS (0x02) #define MPI_CONFIG_PAGETYPE_SCSI_PORT (0x03) #define MPI_CONFIG_PAGETYPE_SCSI_DEVICE (0x04) #define MPI_CONFIG_PAGETYPE_FC_PORT (0x05) #define MPI_CONFIG_PAGETYPE_FC_DEVICE (0x06) #define MPI_CONFIG_PAGETYPE_LAN (0x07) #define MPI_CONFIG_PAGETYPE_RAID_VOLUME (0x08) #define MPI_CONFIG_PAGETYPE_MANUFACTURING (0x09) #define MPI_CONFIG_PAGETYPE_RAID_PHYSDISK (0x0A) #define MPI_CONFIG_PAGETYPE_MASK (0x0F) #define MPI_CONFIG_TYPENUM_MASK (0x0FFF) /**************************************************************************** * PageAddress field values ****************************************************************************/ #define MPI_SCSI_PORT_PGAD_PORT_MASK (0x000000FF) #define MPI_SCSI_DEVICE_TARGET_ID_MASK (0x000000FF) #define MPI_SCSI_DEVICE_TARGET_ID_SHIFT (0) #define MPI_SCSI_DEVICE_BUS_MASK (0x0000FF00) #define MPI_SCSI_DEVICE_BUS_SHIFT (8) #define MPI_FC_PORT_PGAD_PORT_MASK (0xF0000000) #define MPI_FC_PORT_PGAD_PORT_SHIFT (28) #define MPI_FC_PORT_PGAD_FORM_MASK (0x0F000000) #define MPI_FC_PORT_PGAD_FORM_INDEX (0x01000000) #define MPI_FC_PORT_PGAD_INDEX_MASK (0x0000FFFF) #define MPI_FC_PORT_PGAD_INDEX_SHIFT (0) #define MPI_FC_DEVICE_PGAD_PORT_MASK (0xF0000000) #define MPI_FC_DEVICE_PGAD_PORT_SHIFT (28) #define MPI_FC_DEVICE_PGAD_FORM_MASK (0x0F000000) #define MPI_FC_DEVICE_PGAD_FORM_NEXT_DID (0x00000000) #define MPI_FC_DEVICE_PGAD_ND_PORT_MASK (0xF0000000) #define MPI_FC_DEVICE_PGAD_ND_PORT_SHIFT (28) #define MPI_FC_DEVICE_PGAD_ND_DID_MASK (0x00FFFFFF) #define MPI_FC_DEVICE_PGAD_ND_DID_SHIFT (0) #define MPI_FC_DEVICE_PGAD_FORM_BUS_TID (0x01000000) #define MPI_FC_DEVICE_PGAD_BT_BUS_MASK (0x0000FF00) #define MPI_FC_DEVICE_PGAD_BT_BUS_SHIFT (8) #define MPI_FC_DEVICE_PGAD_BT_TID_MASK (0x000000FF) #define MPI_FC_DEVICE_PGAD_BT_TID_SHIFT (0) #define MPI_PHYSDISK_PGAD_PHYSDISKNUM_MASK (0x000000FF) #define MPI_PHYSDISK_PGAD_PHYSDISKNUM_SHIFT (0) /**************************************************************************** * Config Request Message ****************************************************************************/ typedef struct _MSG_CONFIG { U8 Action; /* 00h */ U8 Reserved; /* 01h */ U8 ChainOffset; /* 02h */ U8 Function; /* 03h */ U8 Reserved1[3]; /* 04h */ U8 MsgFlags; /* 07h */ U32 MsgContext; /* 08h */ U8 Reserved2[8]; /* 0Ch */ fCONFIG_PAGE_HEADER Header; /* 14h */ U32 PageAddress; /* 18h */ SGE_IO_UNION PageBufferSGE; /* 1Ch */ } MSG_CONFIG, MPI_POINTER PTR_MSG_CONFIG, Config_t, MPI_POINTER pConfig_t; /**************************************************************************** * Action field values ****************************************************************************/ #define MPI_CONFIG_ACTION_PAGE_HEADER (0x00) #define MPI_CONFIG_ACTION_PAGE_READ_CURRENT (0x01) #define MPI_CONFIG_ACTION_PAGE_WRITE_CURRENT (0x02) #define MPI_CONFIG_ACTION_PAGE_DEFAULT (0x03) #define MPI_CONFIG_ACTION_PAGE_WRITE_NVRAM (0x04) #define MPI_CONFIG_ACTION_PAGE_READ_DEFAULT (0x05) #define MPI_CONFIG_ACTION_PAGE_READ_NVRAM (0x06) /* Config Reply Message */ typedef struct _MSG_CONFIG_REPLY { U8 Action; /* 00h */ U8 Reserved; /* 01h */ U8 MsgLength; /* 02h */ U8 Function; /* 03h */ U8 Reserved1[3]; /* 04h */ U8 MsgFlags; /* 07h */ U32 MsgContext; /* 08h */ U8 Reserved2[2]; /* 0Ch */ U16 IOCStatus; /* 0Eh */ U32 IOCLogInfo; /* 10h */ fCONFIG_PAGE_HEADER Header; /* 14h */ } MSG_CONFIG_REPLY, MPI_POINTER PTR_MSG_CONFIG_REPLY, ConfigReply_t, MPI_POINTER pConfigReply_t; /***************************************************************************** * * C o n f i g u r a t i o n P a g e s * *****************************************************************************/ /**************************************************************************** * Manufacturing Config pages ****************************************************************************/ #define MPI_MANUFACTPAGE_VENDORID_LSILOGIC (0x1000) #define MPI_MANUFACTPAGE_VENDORID_TREBIA (0x1783) #define MPI_MANUFACTPAGE_DEVICEID_FC909 (0x0621) #define MPI_MANUFACTPAGE_DEVICEID_FC919 (0x0624) #define MPI_MANUFACTPAGE_DEVICEID_FC929 (0x0622) #define MPI_MANUFACTPAGE_DEVICEID_FC919X (0x0628) #define MPI_MANUFACTPAGE_DEVICEID_FC929X (0x0626) #define MPI_MANUFACTPAGE_DEVID_53C1030 (0x0030) #define MPI_MANUFACTPAGE_DEVID_53C1030ZC (0x0031) #define MPI_MANUFACTPAGE_DEVID_1030_53C1035 (0x0032) #define MPI_MANUFACTPAGE_DEVID_1030ZC_53C1035 (0x0033) #define MPI_MANUFACTPAGE_DEVID_53C1035 (0x0040) #define MPI_MANUFACTPAGE_DEVID_53C1035ZC (0x0041) #define MPI_MANUFACTPAGE_DEVID_SA2010 (0x0804) #define MPI_MANUFACTPAGE_DEVID_SA2010ZC (0x0805) #define MPI_MANUFACTPAGE_DEVID_SA2020 (0x0806) #define MPI_MANUFACTPAGE_DEVID_SA2020ZC (0x0807) #define MPI_MANUFACTPAGE_DEVID_SNP1000 (0x0010) #define MPI_MANUFACTPAGE_DEVID_SNP500 (0x0020) typedef struct _CONFIG_PAGE_MANUFACTURING_0 { fCONFIG_PAGE_HEADER Header; /* 00h */ U8 ChipName[16]; /* 04h */ U8 ChipRevision[8]; /* 14h */ U8 BoardName[16]; /* 1Ch */ U8 BoardAssembly[16]; /* 2Ch */ U8 BoardTracerNumber[16]; /* 3Ch */ } fCONFIG_PAGE_MANUFACTURING_0, MPI_POINTER PTR_CONFIG_PAGE_MANUFACTURING_0, ManufacturingPage0_t, MPI_POINTER pManufacturingPage0_t; #define MPI_MANUFACTURING0_PAGEVERSION (0x00) typedef struct _CONFIG_PAGE_MANUFACTURING_1 { fCONFIG_PAGE_HEADER Header; /* 00h */ U8 VPD[256]; /* 04h */ } fCONFIG_PAGE_MANUFACTURING_1, MPI_POINTER PTR_CONFIG_PAGE_MANUFACTURING_1, ManufacturingPage1_t, MPI_POINTER pManufacturingPage1_t; #define MPI_MANUFACTURING1_PAGEVERSION (0x00) typedef struct _MPI_CHIP_REVISION_ID { U16 DeviceID; /* 00h */ U8 PCIRevisionID; /* 02h */ U8 Reserved; /* 03h */ } MPI_CHIP_REVISION_ID, MPI_POINTER PTR_MPI_CHIP_REVISION_ID, MpiChipRevisionId_t, MPI_POINTER pMpiChipRevisionId_t; /* * Host code (drivers, BIOS, utilities, etc.) should leave this define set to * one and check Header.PageLength at runtime. */ #ifndef MPI_MAN_PAGE_2_HW_SETTINGS_WORDS #define MPI_MAN_PAGE_2_HW_SETTINGS_WORDS (1) #endif typedef struct _CONFIG_PAGE_MANUFACTURING_2 { fCONFIG_PAGE_HEADER Header; /* 00h */ MPI_CHIP_REVISION_ID ChipId; /* 04h */ U32 HwSettings[MPI_MAN_PAGE_2_HW_SETTINGS_WORDS];/* 08h */ } fCONFIG_PAGE_MANUFACTURING_2, MPI_POINTER PTR_CONFIG_PAGE_MANUFACTURING_2, ManufacturingPage2_t, MPI_POINTER pManufacturingPage2_t; #define MPI_MANUFACTURING2_PAGEVERSION (0x00) /* * Host code (drivers, BIOS, utilities, etc.) should leave this define set to * one and check Header.PageLength at runtime. */ #ifndef MPI_MAN_PAGE_3_INFO_WORDS #define MPI_MAN_PAGE_3_INFO_WORDS (1) #endif typedef struct _CONFIG_PAGE_MANUFACTURING_3 { fCONFIG_PAGE_HEADER Header; /* 00h */ MPI_CHIP_REVISION_ID ChipId; /* 04h */ U32 Info[MPI_MAN_PAGE_3_INFO_WORDS];/* 08h */ } fCONFIG_PAGE_MANUFACTURING_3, MPI_POINTER PTR_CONFIG_PAGE_MANUFACTURING_3, ManufacturingPage3_t, MPI_POINTER pManufacturingPage3_t; #define MPI_MANUFACTURING3_PAGEVERSION (0x00) typedef struct _CONFIG_PAGE_MANUFACTURING_4 { fCONFIG_PAGE_HEADER Header; /* 00h */ U32 Reserved1; /* 04h */ U8 InfoOffset0; /* 08h */ U8 InfoSize0; /* 09h */ U8 InfoOffset1; /* 0Ah */ U8 InfoSize1; /* 0Bh */ U8 InquirySize; /* 0Ch */ U8 Reserved2; /* 0Dh */ U16 Reserved3; /* 0Eh */ U8 InquiryData[56]; /* 10h */ U32 ISVolumeSettings; /* 48h */ U32 IMEVolumeSettings; /* 4Ch */ U32 IMVolumeSettings; /* 50h */ } fCONFIG_PAGE_MANUFACTURING_4, MPI_POINTER PTR_CONFIG_PAGE_MANUFACTURING_4, ManufacturingPage4_t, MPI_POINTER pManufacturingPage4_t; #define MPI_MANUFACTURING4_PAGEVERSION (0x00) /**************************************************************************** * IO Unit Config Pages ****************************************************************************/ typedef struct _CONFIG_PAGE_IO_UNIT_0 { fCONFIG_PAGE_HEADER Header; /* 00h */ U64 UniqueValue; /* 04h */ } fCONFIG_PAGE_IO_UNIT_0, MPI_POINTER PTR_CONFIG_PAGE_IO_UNIT_0, IOUnitPage0_t, MPI_POINTER pIOUnitPage0_t; #define MPI_IOUNITPAGE0_PAGEVERSION (0x00) typedef struct _CONFIG_PAGE_IO_UNIT_1 { fCONFIG_PAGE_HEADER Header; /* 00h */ U32 Flags; /* 04h */ } fCONFIG_PAGE_IO_UNIT_1, MPI_POINTER PTR_CONFIG_PAGE_IO_UNIT_1, IOUnitPage1_t, MPI_POINTER pIOUnitPage1_t; #define MPI_IOUNITPAGE1_PAGEVERSION (0x00) /* IO Unit Page 1 Flags defines */ #define MPI_IOUNITPAGE1_MULTI_FUNCTION (0x00000000) #define MPI_IOUNITPAGE1_SINGLE_FUNCTION (0x00000001) #define MPI_IOUNITPAGE1_MULTI_PATHING (0x00000002) #define MPI_IOUNITPAGE1_SINGLE_PATHING (0x00000000) #define MPI_IOUNITPAGE1_IR_USE_STATIC_VOLUME_ID (0x00000004) #define MPI_IOUNITPAGE1_DISABLE_IR (0x00000040) #define MPI_IOUNITPAGE1_FORCE_32 (0x00000080) typedef struct _MPI_ADAPTER_INFO { U8 PciBusNumber; /* 00h */ U8 PciDeviceAndFunctionNumber; /* 01h */ U16 AdapterFlags; /* 02h */ } MPI_ADAPTER_INFO, MPI_POINTER PTR_MPI_ADAPTER_INFO, MpiAdapterInfo_t, MPI_POINTER pMpiAdapterInfo_t; #define MPI_ADAPTER_INFO_FLAGS_EMBEDDED (0x0001) #define MPI_ADAPTER_INFO_FLAGS_INIT_STATUS (0x0002) typedef struct _CONFIG_PAGE_IO_UNIT_2 { fCONFIG_PAGE_HEADER Header; /* 00h */ U32 Flags; /* 04h */ U32 BiosVersion; /* 08h */ MPI_ADAPTER_INFO AdapterOrder[4]; /* 0Ch */ } fCONFIG_PAGE_IO_UNIT_2, MPI_POINTER PTR_CONFIG_PAGE_IO_UNIT_2, IOUnitPage2_t, MPI_POINTER pIOUnitPage2_t; #define MPI_IOUNITPAGE2_PAGEVERSION (0x00) #define MPI_IOUNITPAGE2_FLAGS_PAUSE_ON_ERROR (0x00000002) #define MPI_IOUNITPAGE2_FLAGS_VERBOSE_ENABLE (0x00000004) #define MPI_IOUNITPAGE2_FLAGS_COLOR_VIDEO_DISABLE (0x00000008) #define MPI_IOUNITPAGE2_FLAGS_DONT_HOOK_INT_40 (0x00000010) /* * Host code (drivers, BIOS, utilities, etc.) should leave this define set to * one and check Header.PageLength at runtime. */ #ifndef MPI_IO_UNIT_PAGE_3_GPIO_VAL_MAX #define MPI_IO_UNIT_PAGE_3_GPIO_VAL_MAX (1) #endif typedef struct _CONFIG_PAGE_IO_UNIT_3 { fCONFIG_PAGE_HEADER Header; /* 00h */ U8 GPIOCount; /* 04h */ U8 Reserved1; /* 05h */ U16 Reserved2; /* 06h */ U16 GPIOVal[MPI_IO_UNIT_PAGE_3_GPIO_VAL_MAX]; /* 08h */ } fCONFIG_PAGE_IO_UNIT_3, MPI_POINTER PTR_CONFIG_PAGE_IO_UNIT_3, IOUnitPage3_t, MPI_POINTER pIOUnitPage3_t; #define MPI_IOUNITPAGE3_PAGEVERSION (0x01) #define MPI_IOUNITPAGE3_GPIO_FUNCTION_MASK (0xFC) #define MPI_IOUNITPAGE3_GPIO_FUNCTION_SHIFT (2) #define MPI_IOUNITPAGE3_GPIO_SETTING_OFF (0x00) #define MPI_IOUNITPAGE3_GPIO_SETTING_ON (0x01) /**************************************************************************** * IOC Config Pages ****************************************************************************/ typedef struct _CONFIG_PAGE_IOC_0 { fCONFIG_PAGE_HEADER Header; /* 00h */ U32 TotalNVStore; /* 04h */ U32 FreeNVStore; /* 08h */ U16 VendorID; /* 0Ch */ U16 DeviceID; /* 0Eh */ U8 RevisionID; /* 10h */ U8 Reserved[3]; /* 11h */ U32 ClassCode; /* 14h */ U16 SubsystemVendorID; /* 18h */ U16 SubsystemID; /* 1Ah */ } fCONFIG_PAGE_IOC_0, MPI_POINTER PTR_CONFIG_PAGE_IOC_0, IOCPage0_t, MPI_POINTER pIOCPage0_t; #define MPI_IOCPAGE0_PAGEVERSION (0x01) typedef struct _CONFIG_PAGE_IOC_1 { fCONFIG_PAGE_HEADER Header; /* 00h */ U32 Flags; /* 04h */ U32 CoalescingTimeout; /* 08h */ U8 CoalescingDepth; /* 0Ch */ U8 PCISlotNum; /* 0Dh */ U8 Reserved[2]; /* 0Eh */ } fCONFIG_PAGE_IOC_1, MPI_POINTER PTR_CONFIG_PAGE_IOC_1, IOCPage1_t, MPI_POINTER pIOCPage1_t; #define MPI_IOCPAGE1_PAGEVERSION (0x01) #define MPI_IOCPAGE1_REPLY_COALESCING (0x00000001) #define MPI_IOCPAGE1_PCISLOTNUM_UNKNOWN (0xFF) typedef struct _CONFIG_PAGE_IOC_2_RAID_VOL { U8 VolumeID; /* 00h */ U8 VolumeBus; /* 01h */ U8 VolumeIOC; /* 02h */ U8 VolumePageNumber; /* 03h */ U8 VolumeType; /* 04h */ U8 Flags; /* 05h */ U16 Reserved3; /* 06h */ } fCONFIG_PAGE_IOC_2_RAID_VOL, MPI_POINTER PTR_CONFIG_PAGE_IOC_2_RAID_VOL, ConfigPageIoc2RaidVol_t, MPI_POINTER pConfigPageIoc2RaidVol_t; /* IOC Page 2 Volume RAID Type values, also used in RAID Volume pages */ #define MPI_RAID_VOL_TYPE_IS (0x00) #define MPI_RAID_VOL_TYPE_IME (0x01) #define MPI_RAID_VOL_TYPE_IM (0x02) /* IOC Page 2 Volume Flags values */ #define MPI_IOCPAGE2_FLAG_VOLUME_INACTIVE (0x08) /* * Host code (drivers, BIOS, utilities, etc.) should leave this define set to * one and check Header.PageLength at runtime. */ #ifndef MPI_IOC_PAGE_2_RAID_VOLUME_MAX #define MPI_IOC_PAGE_2_RAID_VOLUME_MAX (1) #endif typedef struct _CONFIG_PAGE_IOC_2 { fCONFIG_PAGE_HEADER Header; /* 00h */ U32 CapabilitiesFlags; /* 04h */ U8 NumActiveVolumes; /* 08h */ U8 MaxVolumes; /* 09h */ U8 NumActivePhysDisks; /* 0Ah */ U8 MaxPhysDisks; /* 0Bh */ fCONFIG_PAGE_IOC_2_RAID_VOL RaidVolume[MPI_IOC_PAGE_2_RAID_VOLUME_MAX];/* 0Ch */ } fCONFIG_PAGE_IOC_2, MPI_POINTER PTR_CONFIG_PAGE_IOC_2, IOCPage2_t, MPI_POINTER pIOCPage2_t; #define MPI_IOCPAGE2_PAGEVERSION (0x02) /* IOC Page 2 Capabilities flags */ #define MPI_IOCPAGE2_CAP_FLAGS_IS_SUPPORT (0x00000001) #define MPI_IOCPAGE2_CAP_FLAGS_IME_SUPPORT (0x00000002) #define MPI_IOCPAGE2_CAP_FLAGS_IM_SUPPORT (0x00000004) #define MPI_IOCPAGE2_CAP_FLAGS_SES_SUPPORT (0x20000000) #define MPI_IOCPAGE2_CAP_FLAGS_SAFTE_SUPPORT (0x40000000) #define MPI_IOCPAGE2_CAP_FLAGS_CROSS_CHANNEL_SUPPORT (0x80000000) typedef struct _IOC_3_PHYS_DISK { U8 PhysDiskID; /* 00h */ U8 PhysDiskBus; /* 01h */ U8 PhysDiskIOC; /* 02h */ U8 PhysDiskNum; /* 03h */ } IOC_3_PHYS_DISK, MPI_POINTER PTR_IOC_3_PHYS_DISK, Ioc3PhysDisk_t, MPI_POINTER pIoc3PhysDisk_t; /* * Host code (drivers, BIOS, utilities, etc.) should leave this define set to * one and check Header.PageLength at runtime. */ #ifndef MPI_IOC_PAGE_3_PHYSDISK_MAX #define MPI_IOC_PAGE_3_PHYSDISK_MAX (1) #endif typedef struct _CONFIG_PAGE_IOC_3 { fCONFIG_PAGE_HEADER Header; /* 00h */ U8 NumPhysDisks; /* 04h */ U8 Reserved1; /* 05h */ U16 Reserved2; /* 06h */ IOC_3_PHYS_DISK PhysDisk[MPI_IOC_PAGE_3_PHYSDISK_MAX]; /* 08h */ } fCONFIG_PAGE_IOC_3, MPI_POINTER PTR_CONFIG_PAGE_IOC_3, IOCPage3_t, MPI_POINTER pIOCPage3_t; #define MPI_IOCPAGE3_PAGEVERSION (0x00) typedef struct _IOC_4_SEP { U8 SEPTargetID; /* 00h */ U8 SEPBus; /* 01h */ U16 Reserved; /* 02h */ } IOC_4_SEP, MPI_POINTER PTR_IOC_4_SEP, Ioc4Sep_t, MPI_POINTER pIoc4Sep_t; /* * Host code (drivers, BIOS, utilities, etc.) should leave this define set to * one and check Header.PageLength at runtime. */ #ifndef MPI_IOC_PAGE_4_SEP_MAX #define MPI_IOC_PAGE_4_SEP_MAX (1) #endif typedef struct _CONFIG_PAGE_IOC_4 { fCONFIG_PAGE_HEADER Header; /* 00h */ U8 ActiveSEP; /* 04h */ U8 MaxSEP; /* 05h */ U16 Reserved1; /* 06h */ IOC_4_SEP SEP[MPI_IOC_PAGE_4_SEP_MAX]; /* 08h */ } fCONFIG_PAGE_IOC_4, MPI_POINTER PTR_CONFIG_PAGE_IOC_4, IOCPage4_t, MPI_POINTER pIOCPage4_t; #define MPI_IOCPAGE4_PAGEVERSION (0x00) typedef struct _IOC_5_HOT_SPARE { U8 PhysDiskNum; /* 00h */ U8 Reserved; /* 01h */ U8 HotSparePool; /* 02h */ U8 Flags; /* 03h */ } IOC_5_HOT_SPARE, MPI_POINTER PTR_IOC_5_HOT_SPARE, Ioc5HotSpare_t, MPI_POINTER pIoc5HotSpare_t; /* IOC Page 5 HotSpare Flags */ #define MPI_IOC_PAGE_5_HOT_SPARE_ACTIVE (0x01) /* * Host code (drivers, BIOS, utilities, etc.) should leave this define set to * one and check Header.PageLength at runtime. */ #ifndef MPI_IOC_PAGE_5_HOT_SPARE_MAX #define MPI_IOC_PAGE_5_HOT_SPARE_MAX (1) #endif typedef struct _CONFIG_PAGE_IOC_5 { fCONFIG_PAGE_HEADER Header; /* 00h */ U32 Reserved1; /* 04h */ U8 NumHotSpares; /* 08h */ U8 Reserved2; /* 09h */ U16 Reserved3; /* 0Ah */ IOC_5_HOT_SPARE HotSpare[MPI_IOC_PAGE_5_HOT_SPARE_MAX]; /* 0Ch */ } fCONFIG_PAGE_IOC_5, MPI_POINTER PTR_CONFIG_PAGE_IOC_5, IOCPage5_t, MPI_POINTER pIOCPage5_t; #define MPI_IOCPAGE5_PAGEVERSION (0x00) /**************************************************************************** * SCSI Port Config Pages ****************************************************************************/ typedef struct _CONFIG_PAGE_SCSI_PORT_0 { fCONFIG_PAGE_HEADER Header; /* 00h */ U32 Capabilities; /* 04h */ U32 PhysicalInterface; /* 08h */ } fCONFIG_PAGE_SCSI_PORT_0, MPI_POINTER PTR_CONFIG_PAGE_SCSI_PORT_0, SCSIPortPage0_t, MPI_POINTER pSCSIPortPage0_t; #define MPI_SCSIPORTPAGE0_PAGEVERSION (0x01) #define MPI_SCSIPORTPAGE0_CAP_IU (0x00000001) #define MPI_SCSIPORTPAGE0_CAP_DT (0x00000002) #define MPI_SCSIPORTPAGE0_CAP_QAS (0x00000004) #define MPI_SCSIPORTPAGE0_CAP_MIN_SYNC_PERIOD_MASK (0x0000FF00) #define MPI_SCSIPORTPAGE0_CAP_MAX_SYNC_OFFSET_MASK (0x00FF0000) #define MPI_SCSIPORTPAGE0_CAP_WIDE (0x20000000) #define MPI_SCSIPORTPAGE0_CAP_AIP (0x80000000) #define MPI_SCSIPORTPAGE0_PHY_SIGNAL_TYPE_MASK (0x00000003) #define MPI_SCSIPORTPAGE0_PHY_SIGNAL_HVD (0x01) #define MPI_SCSIPORTPAGE0_PHY_SIGNAL_SE (0x02) #define MPI_SCSIPORTPAGE0_PHY_SIGNAL_LVD (0x03) #define MPI_SCSIPORTPAGE0_PHY_MASK_CONNECTED_ID (0xFF000000) #define MPI_SCSIPORTPAGE0_PHY_SHIFT_CONNECTED_ID (24) #define MPI_SCSIPORTPAGE0_PHY_BUS_FREE_CONNECTED_ID (0xFE) #define MPI_SCSIPORTPAGE0_PHY_UNKNOWN_CONNECTED_ID (0xFF) typedef struct _CONFIG_PAGE_SCSI_PORT_1 { fCONFIG_PAGE_HEADER Header; /* 00h */ U32 Configuration; /* 04h */ U32 OnBusTimerValue; /* 08h */ U8 TargetConfig; /* 0Ch */ U8 Reserved1; /* 0Dh */ U16 IDConfig; /* 0Eh */ } fCONFIG_PAGE_SCSI_PORT_1, MPI_POINTER PTR_CONFIG_PAGE_SCSI_PORT_1, SCSIPortPage1_t, MPI_POINTER pSCSIPortPage1_t; #define MPI_SCSIPORTPAGE1_PAGEVERSION (0x02) /* Configuration values */ #define MPI_SCSIPORTPAGE1_CFG_PORT_SCSI_ID_MASK (0x000000FF) #define MPI_SCSIPORTPAGE1_CFG_PORT_RESPONSE_ID_MASK (0xFFFF0000) /* TargetConfig values */ #define MPI_SCSIPORTPAGE1_TARGCONFIG_TARG_ONLY (0x01) #define MPI_SCSIPORTPAGE1_TARGCONFIG_INIT_TARG (0x02) typedef struct _MPI_DEVICE_INFO { U8 Timeout; /* 00h */ U8 SyncFactor; /* 01h */ U16 DeviceFlags; /* 02h */ } MPI_DEVICE_INFO, MPI_POINTER PTR_MPI_DEVICE_INFO, MpiDeviceInfo_t, MPI_POINTER pMpiDeviceInfo_t; typedef struct _CONFIG_PAGE_SCSI_PORT_2 { fCONFIG_PAGE_HEADER Header; /* 00h */ U32 PortFlags; /* 04h */ U32 PortSettings; /* 08h */ MPI_DEVICE_INFO DeviceSettings[16]; /* 0Ch */ } fCONFIG_PAGE_SCSI_PORT_2, MPI_POINTER PTR_CONFIG_PAGE_SCSI_PORT_2, SCSIPortPage2_t, MPI_POINTER pSCSIPortPage2_t; #define MPI_SCSIPORTPAGE2_PAGEVERSION (0x02) /* PortFlags values */ #define MPI_SCSIPORTPAGE2_PORT_FLAGS_SCAN_HIGH_TO_LOW (0x00000001) #define MPI_SCSIPORTPAGE2_PORT_FLAGS_AVOID_SCSI_RESET (0x00000004) #define MPI_SCSIPORTPAGE2_PORT_FLAGS_ALTERNATE_CHS (0x00000008) #define MPI_SCSIPORTPAGE2_PORT_FLAGS_TERMINATION_DISABLE (0x00000010) #define MPI_SCSIPORTPAGE2_PORT_FLAGS_DV_MASK (0x00000060) #define MPI_SCSIPORTPAGE2_PORT_FLAGS_FULL_DV (0x00000000) #define MPI_SCSIPORTPAGE2_PORT_FLAGS_BASIC_DV_ONLY (0x00000020) #define MPI_SCSIPORTPAGE2_PORT_FLAGS_OFF_DV (0x00000060) /* PortSettings values */ #define MPI_SCSIPORTPAGE2_PORT_HOST_ID_MASK (0x0000000F) #define MPI_SCSIPORTPAGE2_PORT_MASK_INIT_HBA (0x00000030) #define MPI_SCSIPORTPAGE2_PORT_DISABLE_INIT_HBA (0x00000000) #define MPI_SCSIPORTPAGE2_PORT_BIOS_INIT_HBA (0x00000010) #define MPI_SCSIPORTPAGE2_PORT_OS_INIT_HBA (0x00000020) #define MPI_SCSIPORTPAGE2_PORT_BIOS_OS_INIT_HBA (0x00000030) #define MPI_SCSIPORTPAGE2_PORT_REMOVABLE_MEDIA (0x000000C0) #define MPI_SCSIPORTPAGE2_PORT_SPINUP_DELAY_MASK (0x00000F00) #define MPI_SCSIPORTPAGE2_PORT_MASK_NEGO_MASTER_SETTINGS (0x00003000) #define MPI_SCSIPORTPAGE2_PORT_NEGO_MASTER_SETTINGS (0x00000000) #define MPI_SCSIPORTPAGE2_PORT_NONE_MASTER_SETTINGS (0x00001000) #define MPI_SCSIPORTPAGE2_PORT_ALL_MASTER_SETTINGS (0x00003000) #define MPI_SCSIPORTPAGE2_DEVICE_DISCONNECT_ENABLE (0x0001) #define MPI_SCSIPORTPAGE2_DEVICE_ID_SCAN_ENABLE (0x0002) #define MPI_SCSIPORTPAGE2_DEVICE_LUN_SCAN_ENABLE (0x0004) #define MPI_SCSIPORTPAGE2_DEVICE_TAG_QUEUE_ENABLE (0x0008) #define MPI_SCSIPORTPAGE2_DEVICE_WIDE_DISABLE (0x0010) #define MPI_SCSIPORTPAGE2_DEVICE_BOOT_CHOICE (0x0020) /**************************************************************************** * SCSI Target Device Config Pages ****************************************************************************/ typedef struct _CONFIG_PAGE_SCSI_DEVICE_0 { fCONFIG_PAGE_HEADER Header; /* 00h */ U32 NegotiatedParameters; /* 04h */ U32 Information; /* 08h */ } fCONFIG_PAGE_SCSI_DEVICE_0, MPI_POINTER PTR_CONFIG_PAGE_SCSI_DEVICE_0, SCSIDevicePage0_t, MPI_POINTER pSCSIDevicePage0_t; #define MPI_SCSIDEVPAGE0_PAGEVERSION (0x03) #define MPI_SCSIDEVPAGE0_NP_IU (0x00000001) #define MPI_SCSIDEVPAGE0_NP_DT (0x00000002) #define MPI_SCSIDEVPAGE0_NP_QAS (0x00000004) #define MPI_SCSIDEVPAGE0_NP_HOLD_MCS (0x00000008) #define MPI_SCSIDEVPAGE0_NP_WR_FLOW (0x00000010) #define MPI_SCSIDEVPAGE0_NP_RD_STRM (0x00000020) #define MPI_SCSIDEVPAGE0_NP_RTI (0x00000040) #define MPI_SCSIDEVPAGE0_NP_PCOMP_EN (0x00000080) #define MPI_SCSIDEVPAGE0_NP_NEG_SYNC_PERIOD_MASK (0x0000FF00) #define MPI_SCSIDEVPAGE0_NP_NEG_SYNC_OFFSET_MASK (0x00FF0000) #define MPI_SCSIDEVPAGE0_NP_WIDE (0x20000000) #define MPI_SCSIDEVPAGE0_NP_AIP (0x80000000) #define MPI_SCSIDEVPAGE0_INFO_PARAMS_NEGOTIATED (0x00000001) #define MPI_SCSIDEVPAGE0_INFO_SDTR_REJECTED (0x00000002) #define MPI_SCSIDEVPAGE0_INFO_WDTR_REJECTED (0x00000004) #define MPI_SCSIDEVPAGE0_INFO_PPR_REJECTED (0x00000008) typedef struct _CONFIG_PAGE_SCSI_DEVICE_1 { fCONFIG_PAGE_HEADER Header; /* 00h */ U32 RequestedParameters; /* 04h */ U32 Reserved; /* 08h */ U32 Configuration; /* 0Ch */ } fCONFIG_PAGE_SCSI_DEVICE_1, MPI_POINTER PTR_CONFIG_PAGE_SCSI_DEVICE_1, SCSIDevicePage1_t, MPI_POINTER pSCSIDevicePage1_t; #define MPI_SCSIDEVPAGE1_PAGEVERSION (0x04) #define MPI_SCSIDEVPAGE1_RP_IU (0x00000001) #define MPI_SCSIDEVPAGE1_RP_DT (0x00000002) #define MPI_SCSIDEVPAGE1_RP_QAS (0x00000004) #define MPI_SCSIDEVPAGE1_RP_HOLD_MCS (0x00000008) #define MPI_SCSIDEVPAGE1_RP_WR_FLOW (0x00000010) #define MPI_SCSIDEVPAGE1_RP_RD_STRM (0x00000020) #define MPI_SCSIDEVPAGE1_RP_RTI (0x00000040) #define MPI_SCSIDEVPAGE1_RP_PCOMP_EN (0x00000080) #define MPI_SCSIDEVPAGE1_RP_MIN_SYNC_PERIOD_MASK (0x0000FF00) #define MPI_SCSIDEVPAGE1_RP_MAX_SYNC_OFFSET_MASK (0x00FF0000) #define MPI_SCSIDEVPAGE1_RP_WIDE (0x20000000) #define MPI_SCSIDEVPAGE1_RP_AIP (0x80000000) #define MPI_SCSIDEVPAGE1_CONF_WDTR_DISALLOWED (0x00000002) #define MPI_SCSIDEVPAGE1_CONF_SDTR_DISALLOWED (0x00000004) #define MPI_SCSIDEVPAGE1_CONF_EXTENDED_PARAMS_ENABLE (0x00000008) #define MPI_SCSIDEVPAGE1_CONF_FORCE_PPR_MSG (0x00000010) typedef struct _CONFIG_PAGE_SCSI_DEVICE_2 { fCONFIG_PAGE_HEADER Header; /* 00h */ U32 DomainValidation; /* 04h */ U32 ParityPipeSelect; /* 08h */ U32 DataPipeSelect; /* 0Ch */ } fCONFIG_PAGE_SCSI_DEVICE_2, MPI_POINTER PTR_CONFIG_PAGE_SCSI_DEVICE_2, SCSIDevicePage2_t, MPI_POINTER pSCSIDevicePage2_t; #define MPI_SCSIDEVPAGE2_PAGEVERSION (0x01) #define MPI_SCSIDEVPAGE2_DV_ISI_ENABLE (0x00000010) #define MPI_SCSIDEVPAGE2_DV_SECONDARY_DRIVER_ENABLE (0x00000020) #define MPI_SCSIDEVPAGE2_DV_SLEW_RATE_CTRL (0x00000380) #define MPI_SCSIDEVPAGE2_DV_PRIM_DRIVE_STR_CTRL (0x00001C00) #define MPI_SCSIDEVPAGE2_DV_SECOND_DRIVE_STR_CTRL (0x0000E000) #define MPI_SCSIDEVPAGE2_DV_XCLKH_ST (0x10000000) #define MPI_SCSIDEVPAGE2_DV_XCLKS_ST (0x20000000) #define MPI_SCSIDEVPAGE2_DV_XCLKH_DT (0x40000000) #define MPI_SCSIDEVPAGE2_DV_XCLKS_DT (0x80000000) #define MPI_SCSIDEVPAGE2_PPS_PPS_MASK (0x00000003) #define MPI_SCSIDEVPAGE2_DPS_BIT_0_PL_SELECT_MASK (0x00000003) #define MPI_SCSIDEVPAGE2_DPS_BIT_1_PL_SELECT_MASK (0x0000000C) #define MPI_SCSIDEVPAGE2_DPS_BIT_2_PL_SELECT_MASK (0x00000030) #define MPI_SCSIDEVPAGE2_DPS_BIT_3_PL_SELECT_MASK (0x000000C0) #define MPI_SCSIDEVPAGE2_DPS_BIT_4_PL_SELECT_MASK (0x00000300) #define MPI_SCSIDEVPAGE2_DPS_BIT_5_PL_SELECT_MASK (0x00000C00) #define MPI_SCSIDEVPAGE2_DPS_BIT_6_PL_SELECT_MASK (0x00003000) #define MPI_SCSIDEVPAGE2_DPS_BIT_7_PL_SELECT_MASK (0x0000C000) #define MPI_SCSIDEVPAGE2_DPS_BIT_8_PL_SELECT_MASK (0x00030000) #define MPI_SCSIDEVPAGE2_DPS_BIT_9_PL_SELECT_MASK (0x000C0000) #define MPI_SCSIDEVPAGE2_DPS_BIT_10_PL_SELECT_MASK (0x00300000) #define MPI_SCSIDEVPAGE2_DPS_BIT_11_PL_SELECT_MASK (0x00C00000) #define MPI_SCSIDEVPAGE2_DPS_BIT_12_PL_SELECT_MASK (0x03000000) #define MPI_SCSIDEVPAGE2_DPS_BIT_13_PL_SELECT_MASK (0x0C000000) #define MPI_SCSIDEVPAGE2_DPS_BIT_14_PL_SELECT_MASK (0x30000000) #define MPI_SCSIDEVPAGE2_DPS_BIT_15_PL_SELECT_MASK (0xC0000000) typedef struct _CONFIG_PAGE_SCSI_DEVICE_3 { fCONFIG_PAGE_HEADER Header; /* 00h */ U16 MsgRejectCount; /* 04h */ U16 PhaseErrorCount; /* 06h */ U16 ParityErrorCount; /* 08h */ U16 Reserved; /* 0Ah */ } fCONFIG_PAGE_SCSI_DEVICE_3, MPI_POINTER PTR_CONFIG_PAGE_SCSI_DEVICE_3, SCSIDevicePage3_t, MPI_POINTER pSCSIDevicePage3_t; #define MPI_SCSIDEVPAGE3_PAGEVERSION (0x00) #define MPI_SCSIDEVPAGE3_MAX_COUNTER (0xFFFE) #define MPI_SCSIDEVPAGE3_UNSUPPORTED_COUNTER (0xFFFF) /**************************************************************************** * FC Port Config Pages ****************************************************************************/ typedef struct _CONFIG_PAGE_FC_PORT_0 { fCONFIG_PAGE_HEADER Header; /* 00h */ U32 Flags; /* 04h */ U8 MPIPortNumber; /* 08h */ U8 LinkType; /* 09h */ U8 PortState; /* 0Ah */ U8 Reserved; /* 0Bh */ U32 PortIdentifier; /* 0Ch */ U64 WWNN; /* 10h */ U64 WWPN; /* 18h */ U32 SupportedServiceClass; /* 20h */ U32 SupportedSpeeds; /* 24h */ U32 CurrentSpeed; /* 28h */ U32 MaxFrameSize; /* 2Ch */ U64 FabricWWNN; /* 30h */ U64 FabricWWPN; /* 38h */ U32 DiscoveredPortsCount; /* 40h */ U32 MaxInitiators; /* 44h */ U8 MaxAliasesSupported; /* 48h */ U8 MaxHardAliasesSupported; /* 49h */ U8 NumCurrentAliases; /* 4Ah */ U8 Reserved1; /* 4Bh */ } fCONFIG_PAGE_FC_PORT_0, MPI_POINTER PTR_CONFIG_PAGE_FC_PORT_0, FCPortPage0_t, MPI_POINTER pFCPortPage0_t; #define MPI_FCPORTPAGE0_PAGEVERSION (0x02) #define MPI_FCPORTPAGE0_FLAGS_PROT_MASK (0x0000000F) #define MPI_FCPORTPAGE0_FLAGS_PROT_FCP_INIT (MPI_PORTFACTS_PROTOCOL_INITIATOR) #define MPI_FCPORTPAGE0_FLAGS_PROT_FCP_TARG (MPI_PORTFACTS_PROTOCOL_TARGET) #define MPI_FCPORTPAGE0_FLAGS_PROT_LAN (MPI_PORTFACTS_PROTOCOL_LAN) #define MPI_FCPORTPAGE0_FLAGS_PROT_LOGBUSADDR (MPI_PORTFACTS_PROTOCOL_LOGBUSADDR) #define MPI_FCPORTPAGE0_FLAGS_ALIAS_ALPA_SUPPORTED (0x00000010) #define MPI_FCPORTPAGE0_FLAGS_ALIAS_WWN_SUPPORTED (0x00000020) #define MPI_FCPORTPAGE0_FLAGS_FABRIC_WWN_VALID (0x00000040) #define MPI_FCPORTPAGE0_FLAGS_ATTACH_TYPE_MASK (0x00000F00) #define MPI_FCPORTPAGE0_FLAGS_ATTACH_NO_INIT (0x00000000) #define MPI_FCPORTPAGE0_FLAGS_ATTACH_POINT_TO_POINT (0x00000100) #define MPI_FCPORTPAGE0_FLAGS_ATTACH_PRIVATE_LOOP (0x00000200) #define MPI_FCPORTPAGE0_FLAGS_ATTACH_FABRIC_DIRECT (0x00000400) #define MPI_FCPORTPAGE0_FLAGS_ATTACH_PUBLIC_LOOP (0x00000800) #define MPI_FCPORTPAGE0_LTYPE_RESERVED (0x00) #define MPI_FCPORTPAGE0_LTYPE_OTHER (0x01) #define MPI_FCPORTPAGE0_LTYPE_UNKNOWN (0x02) #define MPI_FCPORTPAGE0_LTYPE_COPPER (0x03) #define MPI_FCPORTPAGE0_LTYPE_SINGLE_1300 (0x04) #define MPI_FCPORTPAGE0_LTYPE_SINGLE_1500 (0x05) #define MPI_FCPORTPAGE0_LTYPE_50_LASER_MULTI (0x06) #define MPI_FCPORTPAGE0_LTYPE_50_LED_MULTI (0x07) #define MPI_FCPORTPAGE0_LTYPE_62_LASER_MULTI (0x08) #define MPI_FCPORTPAGE0_LTYPE_62_LED_MULTI (0x09) #define MPI_FCPORTPAGE0_LTYPE_MULTI_LONG_WAVE (0x0A) #define MPI_FCPORTPAGE0_LTYPE_MULTI_SHORT_WAVE (0x0B) #define MPI_FCPORTPAGE0_LTYPE_LASER_SHORT_WAVE (0x0C) #define MPI_FCPORTPAGE0_LTYPE_LED_SHORT_WAVE (0x0D) #define MPI_FCPORTPAGE0_LTYPE_1300_LONG_WAVE (0x0E) #define MPI_FCPORTPAGE0_LTYPE_1500_LONG_WAVE (0x0F) #define MPI_FCPORTPAGE0_PORTSTATE_UNKNOWN (0x01) /*(SNIA)HBA_PORTSTATE_UNKNOWN 1 Unknown */ #define MPI_FCPORTPAGE0_PORTSTATE_ONLINE (0x02) /*(SNIA)HBA_PORTSTATE_ONLINE 2 Operational */ #define MPI_FCPORTPAGE0_PORTSTATE_OFFLINE (0x03) /*(SNIA)HBA_PORTSTATE_OFFLINE 3 User Offline */ #define MPI_FCPORTPAGE0_PORTSTATE_BYPASSED (0x04) /*(SNIA)HBA_PORTSTATE_BYPASSED 4 Bypassed */ #define MPI_FCPORTPAGE0_PORTSTATE_DIAGNOST (0x05) /*(SNIA)HBA_PORTSTATE_DIAGNOSTICS 5 In diagnostics mode */ #define MPI_FCPORTPAGE0_PORTSTATE_LINKDOWN (0x06) /*(SNIA)HBA_PORTSTATE_LINKDOWN 6 Link Down */ #define MPI_FCPORTPAGE0_PORTSTATE_ERROR (0x07) /*(SNIA)HBA_PORTSTATE_ERROR 7 Port Error */ #define MPI_FCPORTPAGE0_PORTSTATE_LOOPBACK (0x08) /*(SNIA)HBA_PORTSTATE_LOOPBACK 8 Loopback */ #define MPI_FCPORTPAGE0_SUPPORT_CLASS_1 (0x00000001) #define MPI_FCPORTPAGE0_SUPPORT_CLASS_2 (0x00000002) #define MPI_FCPORTPAGE0_SUPPORT_CLASS_3 (0x00000004) #define MPI_FCPORTPAGE0_SUPPORT_1GBIT_SPEED (0x00000001) /* (SNIA)HBA_PORTSPEED_1GBIT 1 1 GBit/sec */ #define MPI_FCPORTPAGE0_SUPPORT_2GBIT_SPEED (0x00000002) /* (SNIA)HBA_PORTSPEED_2GBIT 2 2 GBit/sec */ #define MPI_FCPORTPAGE0_SUPPORT_10GBIT_SPEED (0x00000004) /* (SNIA)HBA_PORTSPEED_10GBIT 4 10 GBit/sec */ #define MPI_FCPORTPAGE0_CURRENT_SPEED_1GBIT MPI_FCPORTPAGE0_SUPPORT_1GBIT_SPEED #define MPI_FCPORTPAGE0_CURRENT_SPEED_2GBIT MPI_FCPORTPAGE0_SUPPORT_2GBIT_SPEED #define MPI_FCPORTPAGE0_CURRENT_SPEED_10GBIT MPI_FCPORTPAGE0_SUPPORT_10GBIT_SPEED typedef struct _CONFIG_PAGE_FC_PORT_1 { fCONFIG_PAGE_HEADER Header; /* 00h */ U32 Flags; /* 04h */ U64 NoSEEPROMWWNN; /* 08h */ U64 NoSEEPROMWWPN; /* 10h */ U8 HardALPA; /* 18h */ U8 LinkConfig; /* 19h */ U8 TopologyConfig; /* 1Ah */ U8 AltConnector; /* 1Bh */ U8 NumRequestedAliases; /* 1Ch */ U8 RR_TOV; /* 1Dh */ U16 Reserved2; /* 1Eh */ } fCONFIG_PAGE_FC_PORT_1, MPI_POINTER PTR_CONFIG_PAGE_FC_PORT_1, FCPortPage1_t, MPI_POINTER pFCPortPage1_t; #define MPI_FCPORTPAGE1_PAGEVERSION (0x05) #define MPI_FCPORTPAGE1_FLAGS_EXT_FCP_STATUS_EN (0x08000000) #define MPI_FCPORTPAGE1_FLAGS_IMMEDIATE_ERROR_REPLY (0x04000000) #define MPI_FCPORTPAGE1_FLAGS_FORCE_USE_NOSEEPROM_WWNS (0x02000000) #define MPI_FCPORTPAGE1_FLAGS_VERBOSE_RESCAN_EVENTS (0x01000000) #define MPI_FCPORTPAGE1_FLAGS_TARGET_MODE_OXID (0x00800000) #define MPI_FCPORTPAGE1_FLAGS_PORT_OFFLINE (0x00400000) #define MPI_FCPORTPAGE1_FLAGS_MASK_RR_TOV_UNITS (0x00000070) #define MPI_FCPORTPAGE1_FLAGS_SUPPRESS_PROT_REG (0x00000008) #define MPI_FCPORTPAGE1_FLAGS_PLOGI_ON_LOGO (0x00000004) #define MPI_FCPORTPAGE1_FLAGS_MAINTAIN_LOGINS (0x00000002) #define MPI_FCPORTPAGE1_FLAGS_SORT_BY_DID (0x00000001) #define MPI_FCPORTPAGE1_FLAGS_SORT_BY_WWN (0x00000000) #define MPI_FCPORTPAGE1_FLAGS_PROT_MASK (0xF0000000) #define MPI_FCPORTPAGE1_FLAGS_PROT_SHIFT (28) #define MPI_FCPORTPAGE1_FLAGS_PROT_FCP_INIT ((U32)MPI_PORTFACTS_PROTOCOL_INITIATOR << MPI_FCPORTPAGE1_FLAGS_PROT_SHIFT) #define MPI_FCPORTPAGE1_FLAGS_PROT_FCP_TARG ((U32)MPI_PORTFACTS_PROTOCOL_TARGET << MPI_FCPORTPAGE1_FLAGS_PROT_SHIFT) #define MPI_FCPORTPAGE1_FLAGS_PROT_LAN ((U32)MPI_PORTFACTS_PROTOCOL_LAN << MPI_FCPORTPAGE1_FLAGS_PROT_SHIFT) #define MPI_FCPORTPAGE1_FLAGS_PROT_LOGBUSADDR ((U32)MPI_PORTFACTS_PROTOCOL_LOGBUSADDR << MPI_FCPORTPAGE1_FLAGS_PROT_SHIFT) #define MPI_FCPORTPAGE1_FLAGS_NONE_RR_TOV_UNITS (0x00000000) #define MPI_FCPORTPAGE1_FLAGS_THOUSANDTH_RR_TOV_UNITS (0x00000010) #define MPI_FCPORTPAGE1_FLAGS_TENTH_RR_TOV_UNITS (0x00000030) #define MPI_FCPORTPAGE1_FLAGS_TEN_RR_TOV_UNITS (0x00000050) #define MPI_FCPORTPAGE1_HARD_ALPA_NOT_USED (0xFF) #define MPI_FCPORTPAGE1_LCONFIG_SPEED_MASK (0x0F) #define MPI_FCPORTPAGE1_LCONFIG_SPEED_1GIG (0x00) #define MPI_FCPORTPAGE1_LCONFIG_SPEED_2GIG (0x01) #define MPI_FCPORTPAGE1_LCONFIG_SPEED_4GIG (0x02) #define MPI_FCPORTPAGE1_LCONFIG_SPEED_10GIG (0x03) #define MPI_FCPORTPAGE1_LCONFIG_SPEED_AUTO (0x0F) #define MPI_FCPORTPAGE1_TOPOLOGY_MASK (0x0F) #define MPI_FCPORTPAGE1_TOPOLOGY_NLPORT (0x01) #define MPI_FCPORTPAGE1_TOPOLOGY_NPORT (0x02) #define MPI_FCPORTPAGE1_TOPOLOGY_AUTO (0x0F) #define MPI_FCPORTPAGE1_ALT_CONN_UNKNOWN (0x00) typedef struct _CONFIG_PAGE_FC_PORT_2 { fCONFIG_PAGE_HEADER Header; /* 00h */ U8 NumberActive; /* 04h */ U8 ALPA[127]; /* 05h */ } fCONFIG_PAGE_FC_PORT_2, MPI_POINTER PTR_CONFIG_PAGE_FC_PORT_2, FCPortPage2_t, MPI_POINTER pFCPortPage2_t; #define MPI_FCPORTPAGE2_PAGEVERSION (0x01) typedef struct _WWN_FORMAT { U64 WWNN; /* 00h */ U64 WWPN; /* 08h */ } WWN_FORMAT, MPI_POINTER PTR_WWN_FORMAT, WWNFormat, MPI_POINTER pWWNFormat; typedef union _FC_PORT_PERSISTENT_PHYSICAL_ID { WWN_FORMAT WWN; U32 Did; } FC_PORT_PERSISTENT_PHYSICAL_ID, MPI_POINTER PTR_FC_PORT_PERSISTENT_PHYSICAL_ID, PersistentPhysicalId_t, MPI_POINTER pPersistentPhysicalId_t; typedef struct _FC_PORT_PERSISTENT { FC_PORT_PERSISTENT_PHYSICAL_ID PhysicalIdentifier; /* 00h */ U8 TargetID; /* 10h */ U8 Bus; /* 11h */ U16 Flags; /* 12h */ } FC_PORT_PERSISTENT, MPI_POINTER PTR_FC_PORT_PERSISTENT, PersistentData_t, MPI_POINTER pPersistentData_t; #define MPI_PERSISTENT_FLAGS_SHIFT (16) #define MPI_PERSISTENT_FLAGS_ENTRY_VALID (0x0001) #define MPI_PERSISTENT_FLAGS_SCAN_ID (0x0002) #define MPI_PERSISTENT_FLAGS_SCAN_LUNS (0x0004) #define MPI_PERSISTENT_FLAGS_BOOT_DEVICE (0x0008) #define MPI_PERSISTENT_FLAGS_BY_DID (0x0080) /* * Host code (drivers, BIOS, utilities, etc.) should leave this define set to * one and check Header.PageLength at runtime. */ #ifndef MPI_FC_PORT_PAGE_3_ENTRY_MAX #define MPI_FC_PORT_PAGE_3_ENTRY_MAX (1) #endif typedef struct _CONFIG_PAGE_FC_PORT_3 { fCONFIG_PAGE_HEADER Header; /* 00h */ FC_PORT_PERSISTENT Entry[MPI_FC_PORT_PAGE_3_ENTRY_MAX]; /* 04h */ } fCONFIG_PAGE_FC_PORT_3, MPI_POINTER PTR_CONFIG_PAGE_FC_PORT_3, FCPortPage3_t, MPI_POINTER pFCPortPage3_t; #define MPI_FCPORTPAGE3_PAGEVERSION (0x01) typedef struct _CONFIG_PAGE_FC_PORT_4 { fCONFIG_PAGE_HEADER Header; /* 00h */ U32 PortFlags; /* 04h */ U32 PortSettings; /* 08h */ } fCONFIG_PAGE_FC_PORT_4, MPI_POINTER PTR_CONFIG_PAGE_FC_PORT_4, FCPortPage4_t, MPI_POINTER pFCPortPage4_t; #define MPI_FCPORTPAGE4_PAGEVERSION (0x00) #define MPI_FCPORTPAGE4_PORT_FLAGS_ALTERNATE_CHS (0x00000008) #define MPI_FCPORTPAGE4_PORT_MASK_INIT_HBA (0x00000030) #define MPI_FCPORTPAGE4_PORT_DISABLE_INIT_HBA (0x00000000) #define MPI_FCPORTPAGE4_PORT_BIOS_INIT_HBA (0x00000010) #define MPI_FCPORTPAGE4_PORT_OS_INIT_HBA (0x00000020) #define MPI_FCPORTPAGE4_PORT_BIOS_OS_INIT_HBA (0x00000030) #define MPI_FCPORTPAGE4_PORT_REMOVABLE_MEDIA (0x000000C0) #define MPI_FCPORTPAGE4_PORT_SPINUP_DELAY_MASK (0x00000F00) typedef struct _CONFIG_PAGE_FC_PORT_5_ALIAS_INFO { U8 Flags; /* 00h */ U8 AliasAlpa; /* 01h */ U16 Reserved; /* 02h */ U64 AliasWWNN; /* 04h */ U64 AliasWWPN; /* 0Ch */ } fCONFIG_PAGE_FC_PORT_5_ALIAS_INFO, MPI_POINTER PTR_CONFIG_PAGE_FC_PORT_5_ALIAS_INFO, FcPortPage5AliasInfo_t, MPI_POINTER pFcPortPage5AliasInfo_t; typedef struct _CONFIG_PAGE_FC_PORT_5 { fCONFIG_PAGE_HEADER Header; /* 00h */ fCONFIG_PAGE_FC_PORT_5_ALIAS_INFO AliasInfo; /* 04h */ } fCONFIG_PAGE_FC_PORT_5, MPI_POINTER PTR_CONFIG_PAGE_FC_PORT_5, FCPortPage5_t, MPI_POINTER pFCPortPage5_t; #define MPI_FCPORTPAGE5_PAGEVERSION (0x02) #define MPI_FCPORTPAGE5_FLAGS_ALPA_ACQUIRED (0x01) #define MPI_FCPORTPAGE5_FLAGS_HARD_ALPA (0x02) #define MPI_FCPORTPAGE5_FLAGS_HARD_WWNN (0x04) #define MPI_FCPORTPAGE5_FLAGS_HARD_WWPN (0x08) #define MPI_FCPORTPAGE5_FLAGS_DISABLE (0x10) typedef struct _CONFIG_PAGE_FC_PORT_6 { fCONFIG_PAGE_HEADER Header; /* 00h */ U32 Reserved; /* 04h */ U64 TimeSinceReset; /* 08h */ U64 TxFrames; /* 10h */ U64 RxFrames; /* 18h */ U64 TxWords; /* 20h */ U64 RxWords; /* 28h */ U64 LipCount; /* 30h */ U64 NosCount; /* 38h */ U64 ErrorFrames; /* 40h */ U64 DumpedFrames; /* 48h */ U64 LinkFailureCount; /* 50h */ U64 LossOfSyncCount; /* 58h */ U64 LossOfSignalCount; /* 60h */ U64 PrimativeSeqErrCount; /* 68h */ U64 InvalidTxWordCount; /* 70h */ U64 InvalidCrcCount; /* 78h */ U64 FcpInitiatorIoCount; /* 80h */ } fCONFIG_PAGE_FC_PORT_6, MPI_POINTER PTR_CONFIG_PAGE_FC_PORT_6, FCPortPage6_t, MPI_POINTER pFCPortPage6_t; #define MPI_FCPORTPAGE6_PAGEVERSION (0x00) typedef struct _CONFIG_PAGE_FC_PORT_7 { fCONFIG_PAGE_HEADER Header; /* 00h */ U32 Reserved; /* 04h */ U8 PortSymbolicName[256]; /* 08h */ } fCONFIG_PAGE_FC_PORT_7, MPI_POINTER PTR_CONFIG_PAGE_FC_PORT_7, FCPortPage7_t, MPI_POINTER pFCPortPage7_t; #define MPI_FCPORTPAGE7_PAGEVERSION (0x00) typedef struct _CONFIG_PAGE_FC_PORT_8 { fCONFIG_PAGE_HEADER Header; /* 00h */ U32 BitVector[8]; /* 04h */ } fCONFIG_PAGE_FC_PORT_8, MPI_POINTER PTR_CONFIG_PAGE_FC_PORT_8, FCPortPage8_t, MPI_POINTER pFCPortPage8_t; #define MPI_FCPORTPAGE8_PAGEVERSION (0x00) typedef struct _CONFIG_PAGE_FC_PORT_9 { fCONFIG_PAGE_HEADER Header; /* 00h */ U32 Reserved; /* 04h */ U64 GlobalWWPN; /* 08h */ U64 GlobalWWNN; /* 10h */ U32 UnitType; /* 18h */ U32 PhysicalPortNumber; /* 1Ch */ U32 NumAttachedNodes; /* 20h */ U16 IPVersion; /* 24h */ U16 UDPPortNumber; /* 26h */ U8 IPAddress[16]; /* 28h */ U16 Reserved1; /* 38h */ U16 TopologyDiscoveryFlags; /* 3Ah */ } fCONFIG_PAGE_FC_PORT_9, MPI_POINTER PTR_CONFIG_PAGE_FC_PORT_9, FCPortPage9_t, MPI_POINTER pFCPortPage9_t; #define MPI_FCPORTPAGE9_PAGEVERSION (0x00) typedef struct _CONFIG_PAGE_FC_PORT_10_BASE_SFP_DATA { U8 Id; /* 10h */ U8 ExtId; /* 11h */ U8 Connector; /* 12h */ U8 Transceiver[8]; /* 13h */ U8 Encoding; /* 1Bh */ U8 BitRate_100mbs; /* 1Ch */ U8 Reserved1; /* 1Dh */ U8 Length9u_km; /* 1Eh */ U8 Length9u_100m; /* 1Fh */ U8 Length50u_10m; /* 20h */ U8 Length62p5u_10m; /* 21h */ U8 LengthCopper_m; /* 22h */ U8 Reseverved2; /* 22h */ U8 VendorName[16]; /* 24h */ U8 Reserved3; /* 34h */ U8 VendorOUI[3]; /* 35h */ U8 VendorPN[16]; /* 38h */ U8 VendorRev[4]; /* 48h */ U16 Reserved4; /* 4Ch */ U8 Reserved5; /* 4Eh */ U8 CC_BASE; /* 4Fh */ } fCONFIG_PAGE_FC_PORT_10_BASE_SFP_DATA, MPI_POINTER PTR_CONFIG_PAGE_FC_PORT_10_BASE_SFP_DATA, FCPortPage10BaseSfpData_t, MPI_POINTER pFCPortPage10BaseSfpData_t; #define MPI_FCPORT10_BASE_ID_UNKNOWN (0x00) #define MPI_FCPORT10_BASE_ID_GBIC (0x01) #define MPI_FCPORT10_BASE_ID_FIXED (0x02) #define MPI_FCPORT10_BASE_ID_SFP (0x03) #define MPI_FCPORT10_BASE_ID_SFP_MIN (0x04) #define MPI_FCPORT10_BASE_ID_SFP_MAX (0x7F) #define MPI_FCPORT10_BASE_ID_VEND_SPEC_MASK (0x80) #define MPI_FCPORT10_BASE_EXTID_UNKNOWN (0x00) #define MPI_FCPORT10_BASE_EXTID_MODDEF1 (0x01) #define MPI_FCPORT10_BASE_EXTID_MODDEF2 (0x02) #define MPI_FCPORT10_BASE_EXTID_MODDEF3 (0x03) #define MPI_FCPORT10_BASE_EXTID_SEEPROM (0x04) #define MPI_FCPORT10_BASE_EXTID_MODDEF5 (0x05) #define MPI_FCPORT10_BASE_EXTID_MODDEF6 (0x06) #define MPI_FCPORT10_BASE_EXTID_MODDEF7 (0x07) #define MPI_FCPORT10_BASE_EXTID_VNDSPC_MASK (0x80) #define MPI_FCPORT10_BASE_CONN_UNKNOWN (0x00) #define MPI_FCPORT10_BASE_CONN_SC (0x01) #define MPI_FCPORT10_BASE_CONN_COPPER1 (0x02) #define MPI_FCPORT10_BASE_CONN_COPPER2 (0x03) #define MPI_FCPORT10_BASE_CONN_BNC_TNC (0x04) #define MPI_FCPORT10_BASE_CONN_COAXIAL (0x05) #define MPI_FCPORT10_BASE_CONN_FIBERJACK (0x06) #define MPI_FCPORT10_BASE_CONN_LC (0x07) #define MPI_FCPORT10_BASE_CONN_MT_RJ (0x08) #define MPI_FCPORT10_BASE_CONN_MU (0x09) #define MPI_FCPORT10_BASE_CONN_SG (0x0A) #define MPI_FCPORT10_BASE_CONN_OPT_PIGT (0x0B) #define MPI_FCPORT10_BASE_CONN_RSV1_MIN (0x0C) #define MPI_FCPORT10_BASE_CONN_RSV1_MAX (0x1F) #define MPI_FCPORT10_BASE_CONN_HSSDC_II (0x20) #define MPI_FCPORT10_BASE_CONN_CPR_PIGT (0x21) #define MPI_FCPORT10_BASE_CONN_RSV2_MIN (0x22) #define MPI_FCPORT10_BASE_CONN_RSV2_MAX (0x7F) #define MPI_FCPORT10_BASE_CONN_VNDSPC_MASK (0x80) #define MPI_FCPORT10_BASE_ENCODE_UNSPEC (0x00) #define MPI_FCPORT10_BASE_ENCODE_8B10B (0x01) #define MPI_FCPORT10_BASE_ENCODE_4B5B (0x02) #define MPI_FCPORT10_BASE_ENCODE_NRZ (0x03) #define MPI_FCPORT10_BASE_ENCODE_MANCHESTER (0x04) typedef struct _CONFIG_PAGE_FC_PORT_10_EXTENDED_SFP_DATA { U8 Options[2]; /* 50h */ U8 BitRateMax; /* 52h */ U8 BitRateMin; /* 53h */ U8 VendorSN[16]; /* 54h */ U8 DateCode[8]; /* 64h */ U8 Reserved5[3]; /* 6Ch */ U8 CC_EXT; /* 6Fh */ } fCONFIG_PAGE_FC_PORT_10_EXTENDED_SFP_DATA, MPI_POINTER PTR_CONFIG_PAGE_FC_PORT_10_EXTENDED_SFP_DATA, FCPortPage10ExtendedSfpData_t, MPI_POINTER pFCPortPage10ExtendedSfpData_t; #define MPI_FCPORT10_EXT_OPTION1_RATESEL (0x20) #define MPI_FCPORT10_EXT_OPTION1_TX_DISABLE (0x10) #define MPI_FCPORT10_EXT_OPTION1_TX_FAULT (0x08) #define MPI_FCPORT10_EXT_OPTION1_LOS_INVERT (0x04) #define MPI_FCPORT10_EXT_OPTION1_LOS (0x02) typedef struct _CONFIG_PAGE_FC_PORT_10 { fCONFIG_PAGE_HEADER Header; /* 00h */ U8 Flags; /* 04h */ U8 Reserved1; /* 05h */ U16 Reserved2; /* 06h */ U32 HwConfig1; /* 08h */ U32 HwConfig2; /* 0Ch */ fCONFIG_PAGE_FC_PORT_10_BASE_SFP_DATA Base; /* 10h */ fCONFIG_PAGE_FC_PORT_10_EXTENDED_SFP_DATA Extended; /* 50h */ U8 VendorSpecific[32]; /* 70h */ } fCONFIG_PAGE_FC_PORT_10, MPI_POINTER PTR_CONFIG_PAGE_FC_PORT_10, FCPortPage10_t, MPI_POINTER pFCPortPage10_t; #define MPI_FCPORTPAGE10_PAGEVERSION (0x00) /* standard MODDEF pin definitions (from GBIC spec.) */ #define MPI_FCPORTPAGE10_FLAGS_MODDEF_MASK (0x00000007) #define MPI_FCPORTPAGE10_FLAGS_MODDEF2 (0x00000001) #define MPI_FCPORTPAGE10_FLAGS_MODDEF1 (0x00000002) #define MPI_FCPORTPAGE10_FLAGS_MODDEF0 (0x00000004) #define MPI_FCPORTPAGE10_FLAGS_MODDEF_NOGBIC (0x00000007) #define MPI_FCPORTPAGE10_FLAGS_MODDEF_CPR_IEEE_CX (0x00000006) #define MPI_FCPORTPAGE10_FLAGS_MODDEF_COPPER (0x00000005) #define MPI_FCPORTPAGE10_FLAGS_MODDEF_OPTICAL_LW (0x00000004) #define MPI_FCPORTPAGE10_FLAGS_MODDEF_SEEPROM (0x00000003) #define MPI_FCPORTPAGE10_FLAGS_MODDEF_SW_OPTICAL (0x00000002) #define MPI_FCPORTPAGE10_FLAGS_MODDEF_LX_IEEE_OPT_LW (0x00000001) #define MPI_FCPORTPAGE10_FLAGS_MODDEF_SX_IEEE_OPT_SW (0x00000000) #define MPI_FCPORTPAGE10_FLAGS_CC_BASE_OK (0x00000010) #define MPI_FCPORTPAGE10_FLAGS_CC_EXT_OK (0x00000020) /**************************************************************************** * FC Device Config Pages ****************************************************************************/ typedef struct _CONFIG_PAGE_FC_DEVICE_0 { fCONFIG_PAGE_HEADER Header; /* 00h */ U64 WWNN; /* 04h */ U64 WWPN; /* 0Ch */ U32 PortIdentifier; /* 14h */ U8 Protocol; /* 18h */ U8 Flags; /* 19h */ U16 BBCredit; /* 1Ah */ U16 MaxRxFrameSize; /* 1Ch */ U8 ADISCHardALPA; /* 1Eh */ U8 PortNumber; /* 1Fh */ U8 FcPhLowestVersion; /* 20h */ U8 FcPhHighestVersion; /* 21h */ U8 CurrentTargetID; /* 22h */ U8 CurrentBus; /* 23h */ } fCONFIG_PAGE_FC_DEVICE_0, MPI_POINTER PTR_CONFIG_PAGE_FC_DEVICE_0, FCDevicePage0_t, MPI_POINTER pFCDevicePage0_t; #define MPI_FC_DEVICE_PAGE0_PAGEVERSION (0x03) #define MPI_FC_DEVICE_PAGE0_FLAGS_TARGETID_BUS_VALID (0x01) #define MPI_FC_DEVICE_PAGE0_FLAGS_PLOGI_INVALID (0x02) #define MPI_FC_DEVICE_PAGE0_FLAGS_PRLI_INVALID (0x04) #define MPI_FC_DEVICE_PAGE0_PROT_IP (0x01) #define MPI_FC_DEVICE_PAGE0_PROT_FCP_TARGET (0x02) #define MPI_FC_DEVICE_PAGE0_PROT_FCP_INITIATOR (0x04) #define MPI_FC_DEVICE_PAGE0_PROT_FCP_RETRY (0x08) #define MPI_FC_DEVICE_PAGE0_PGAD_PORT_MASK (MPI_FC_DEVICE_PGAD_PORT_MASK) #define MPI_FC_DEVICE_PAGE0_PGAD_FORM_MASK (MPI_FC_DEVICE_PGAD_FORM_MASK) #define MPI_FC_DEVICE_PAGE0_PGAD_FORM_NEXT_DID (MPI_FC_DEVICE_PGAD_FORM_NEXT_DID) #define MPI_FC_DEVICE_PAGE0_PGAD_FORM_BUS_TID (MPI_FC_DEVICE_PGAD_FORM_BUS_TID) #define MPI_FC_DEVICE_PAGE0_PGAD_DID_MASK (MPI_FC_DEVICE_PGAD_ND_DID_MASK) #define MPI_FC_DEVICE_PAGE0_PGAD_BUS_MASK (MPI_FC_DEVICE_PGAD_BT_BUS_MASK) #define MPI_FC_DEVICE_PAGE0_PGAD_BUS_SHIFT (MPI_FC_DEVICE_PGAD_BT_BUS_SHIFT) #define MPI_FC_DEVICE_PAGE0_PGAD_TID_MASK (MPI_FC_DEVICE_PGAD_BT_TID_MASK) #define MPI_FC_DEVICE_PAGE0_HARD_ALPA_UNKNOWN (0xFF) /**************************************************************************** * RAID Volume Config Pages ****************************************************************************/ typedef struct _RAID_VOL0_PHYS_DISK { U16 Reserved; /* 00h */ U8 PhysDiskMap; /* 02h */ U8 PhysDiskNum; /* 03h */ } RAID_VOL0_PHYS_DISK, MPI_POINTER PTR_RAID_VOL0_PHYS_DISK, RaidVol0PhysDisk_t, MPI_POINTER pRaidVol0PhysDisk_t; #define MPI_RAIDVOL0_PHYSDISK_PRIMARY (0x01) #define MPI_RAIDVOL0_PHYSDISK_SECONDARY (0x02) typedef struct _RAID_VOL0_STATUS { U8 Flags; /* 00h */ U8 State; /* 01h */ U16 Reserved; /* 02h */ } RAID_VOL0_STATUS, MPI_POINTER PTR_RAID_VOL0_STATUS, RaidVol0Status_t, MPI_POINTER pRaidVol0Status_t; /* RAID Volume Page 0 VolumeStatus defines */ #define MPI_RAIDVOL0_STATUS_FLAG_ENABLED (0x01) #define MPI_RAIDVOL0_STATUS_FLAG_QUIESCED (0x02) #define MPI_RAIDVOL0_STATUS_FLAG_RESYNC_IN_PROGRESS (0x04) #define MPI_RAIDVOL0_STATUS_FLAG_VOLUME_INACTIVE (0x08) #define MPI_RAIDVOL0_STATUS_STATE_OPTIMAL (0x00) #define MPI_RAIDVOL0_STATUS_STATE_DEGRADED (0x01) #define MPI_RAIDVOL0_STATUS_STATE_FAILED (0x02) typedef struct _RAID_VOL0_SETTINGS { U16 Settings; /* 00h */ U8 HotSparePool; /* 01h */ /* MPI_RAID_HOT_SPARE_POOL_ */ U8 Reserved; /* 02h */ } RAID_VOL0_SETTINGS, MPI_POINTER PTR_RAID_VOL0_SETTINGS, RaidVol0Settings, MPI_POINTER pRaidVol0Settings; /* RAID Volume Page 0 VolumeSettings defines */ #define MPI_RAIDVOL0_SETTING_WRITE_CACHING_ENABLE (0x0001) #define MPI_RAIDVOL0_SETTING_OFFLINE_ON_SMART (0x0002) #define MPI_RAIDVOL0_SETTING_AUTO_CONFIGURE (0x0004) #define MPI_RAIDVOL0_SETTING_PRIORITY_RESYNC (0x0008) #define MPI_RAIDVOL0_SETTING_USE_PRODUCT_ID_SUFFIX (0x0010) #define MPI_RAIDVOL0_SETTING_USE_DEFAULTS (0x8000) /* RAID Volume Page 0 HotSparePool defines, also used in RAID Physical Disk */ #define MPI_RAID_HOT_SPARE_POOL_0 (0x01) #define MPI_RAID_HOT_SPARE_POOL_1 (0x02) #define MPI_RAID_HOT_SPARE_POOL_2 (0x04) #define MPI_RAID_HOT_SPARE_POOL_3 (0x08) #define MPI_RAID_HOT_SPARE_POOL_4 (0x10) #define MPI_RAID_HOT_SPARE_POOL_5 (0x20) #define MPI_RAID_HOT_SPARE_POOL_6 (0x40) #define MPI_RAID_HOT_SPARE_POOL_7 (0x80) /* * Host code (drivers, BIOS, utilities, etc.) should leave this define set to * one and check Header.PageLength at runtime. */ #ifndef MPI_RAID_VOL_PAGE_0_PHYSDISK_MAX #define MPI_RAID_VOL_PAGE_0_PHYSDISK_MAX (1) #endif typedef struct _CONFIG_PAGE_RAID_VOL_0 { fCONFIG_PAGE_HEADER Header; /* 00h */ U8 VolumeID; /* 04h */ U8 VolumeBus; /* 05h */ U8 VolumeIOC; /* 06h */ U8 VolumeType; /* 07h */ /* MPI_RAID_VOL_TYPE_ */ RAID_VOL0_STATUS VolumeStatus; /* 08h */ RAID_VOL0_SETTINGS VolumeSettings; /* 0Ch */ U32 MaxLBA; /* 10h */ U32 Reserved1; /* 14h */ U32 StripeSize; /* 18h */ U32 Reserved2; /* 1Ch */ U32 Reserved3; /* 20h */ U8 NumPhysDisks; /* 24h */ U8 Reserved4; /* 25h */ U16 Reserved5; /* 26h */ RAID_VOL0_PHYS_DISK PhysDisk[MPI_RAID_VOL_PAGE_0_PHYSDISK_MAX];/* 28h */ } fCONFIG_PAGE_RAID_VOL_0, MPI_POINTER PTR_CONFIG_PAGE_RAID_VOL_0, RaidVolumePage0_t, MPI_POINTER pRaidVolumePage0_t; #define MPI_RAIDVOLPAGE0_PAGEVERSION (0x01) /**************************************************************************** * RAID Physical Disk Config Pages ****************************************************************************/ typedef struct _RAID_PHYS_DISK0_ERROR_DATA { U8 ErrorCdbByte; /* 00h */ U8 ErrorSenseKey; /* 01h */ U16 Reserved; /* 02h */ U16 ErrorCount; /* 04h */ U8 ErrorASC; /* 06h */ U8 ErrorASCQ; /* 07h */ U16 SmartCount; /* 08h */ U8 SmartASC; /* 0Ah */ U8 SmartASCQ; /* 0Bh */ } RAID_PHYS_DISK0_ERROR_DATA, MPI_POINTER PTR_RAID_PHYS_DISK0_ERROR_DATA, RaidPhysDisk0ErrorData_t, MPI_POINTER pRaidPhysDisk0ErrorData_t; typedef struct _RAID_PHYS_DISK_INQUIRY_DATA { U8 VendorID[8]; /* 00h */ U8 ProductID[16]; /* 08h */ U8 ProductRevLevel[4]; /* 18h */ U8 Info[32]; /* 1Ch */ } RAID_PHYS_DISK0_INQUIRY_DATA, MPI_POINTER PTR_RAID_PHYS_DISK0_INQUIRY_DATA, RaidPhysDisk0InquiryData, MPI_POINTER pRaidPhysDisk0InquiryData; typedef struct _RAID_PHYS_DISK0_SETTINGS { U8 SepID; /* 00h */ U8 SepBus; /* 01h */ U8 HotSparePool; /* 02h */ /* MPI_RAID_HOT_SPARE_POOL_ */ U8 PhysDiskSettings; /* 03h */ } RAID_PHYS_DISK0_SETTINGS, MPI_POINTER PTR_RAID_PHYS_DISK0_SETTINGS, RaidPhysDiskSettings_t, MPI_POINTER pRaidPhysDiskSettings_t; typedef struct _RAID_PHYS_DISK0_STATUS { U8 Flags; /* 00h */ U8 State; /* 01h */ U16 Reserved; /* 02h */ } RAID_PHYS_DISK0_STATUS, MPI_POINTER PTR_RAID_PHYS_DISK0_STATUS, RaidPhysDiskStatus_t, MPI_POINTER pRaidPhysDiskStatus_t; /* RAID Volume 2 IM Physical Disk DiskStatus flags */ #define MPI_PHYSDISK0_STATUS_FLAG_OUT_OF_SYNC (0x01) #define MPI_PHYSDISK0_STATUS_FLAG_QUIESCED (0x02) #define MPI_PHYSDISK0_STATUS_ONLINE (0x00) #define MPI_PHYSDISK0_STATUS_MISSING (0x01) #define MPI_PHYSDISK0_STATUS_NOT_COMPATIBLE (0x02) #define MPI_PHYSDISK0_STATUS_FAILED (0x03) #define MPI_PHYSDISK0_STATUS_INITIALIZING (0x04) #define MPI_PHYSDISK0_STATUS_OFFLINE_REQUESTED (0x05) #define MPI_PHYSDISK0_STATUS_FAILED_REQUESTED (0x06) #define MPI_PHYSDISK0_STATUS_OTHER_OFFLINE (0xFF) typedef struct _CONFIG_PAGE_RAID_PHYS_DISK_0 { fCONFIG_PAGE_HEADER Header; /* 00h */ U8 PhysDiskID; /* 04h */ U8 PhysDiskBus; /* 05h */ U8 PhysDiskIOC; /* 06h */ U8 PhysDiskNum; /* 07h */ RAID_PHYS_DISK0_SETTINGS PhysDiskSettings; /* 08h */ U32 Reserved1; /* 0Ch */ U32 Reserved2; /* 10h */ U32 Reserved3; /* 14h */ U8 DiskIdentifier[16]; /* 18h */ RAID_PHYS_DISK0_INQUIRY_DATA InquiryData; /* 28h */ RAID_PHYS_DISK0_STATUS PhysDiskStatus; /* 64h */ U32 MaxLBA; /* 68h */ RAID_PHYS_DISK0_ERROR_DATA ErrorData; /* 6Ch */ } fCONFIG_PAGE_RAID_PHYS_DISK_0, MPI_POINTER PTR_CONFIG_PAGE_RAID_PHYS_DISK_0, RaidPhysDiskPage0_t, MPI_POINTER pRaidPhysDiskPage0_t; #define MPI_RAIDPHYSDISKPAGE0_PAGEVERSION (0x00) /**************************************************************************** * LAN Config Pages ****************************************************************************/ typedef struct _CONFIG_PAGE_LAN_0 { ConfigPageHeader_t Header; /* 00h */ U16 TxRxModes; /* 04h */ U16 Reserved; /* 06h */ U32 PacketPrePad; /* 08h */ } fCONFIG_PAGE_LAN_0, MPI_POINTER PTR_CONFIG_PAGE_LAN_0, LANPage0_t, MPI_POINTER pLANPage0_t; #define MPI_LAN_PAGE0_PAGEVERSION (0x01) #define MPI_LAN_PAGE0_RETURN_LOOPBACK (0x0000) #define MPI_LAN_PAGE0_SUPPRESS_LOOPBACK (0x0001) #define MPI_LAN_PAGE0_LOOPBACK_MASK (0x0001) typedef struct _CONFIG_PAGE_LAN_1 { ConfigPageHeader_t Header; /* 00h */ U16 Reserved; /* 04h */ U8 CurrentDeviceState; /* 06h */ U8 Reserved1; /* 07h */ U32 MinPacketSize; /* 08h */ U32 MaxPacketSize; /* 0Ch */ U32 HardwareAddressLow; /* 10h */ U32 HardwareAddressHigh; /* 14h */ U32 MaxWireSpeedLow; /* 18h */ U32 MaxWireSpeedHigh; /* 1Ch */ U32 BucketsRemaining; /* 20h */ U32 MaxReplySize; /* 24h */ U32 NegWireSpeedLow; /* 28h */ U32 NegWireSpeedHigh; /* 2Ch */ } fCONFIG_PAGE_LAN_1, MPI_POINTER PTR_CONFIG_PAGE_LAN_1, LANPage1_t, MPI_POINTER pLANPage1_t; #define MPI_LAN_PAGE1_PAGEVERSION (0x03) #define MPI_LAN_PAGE1_DEV_STATE_RESET (0x00) #define MPI_LAN_PAGE1_DEV_STATE_OPERATIONAL (0x01) #endif
Go to most recent revision | Compare with Previous | Blame | View Log