Subversion Repositories or1k

/*
* cycx_main.c	Cyclades Cyclom 2X WAN Link Driver. Main module.
*
* Author:	Arnaldo Carvalho de Melo <acme@conectiva.com.br>
*
* Copyright:	(c) 1998-2001 Arnaldo Carvalho de Melo
*
* Based on sdlamain.c by Gene Kozin <genek@compuserve.com> &
*			 Jaspreet Singh	<jaspreet@sangoma.com>
*
*		This program is free software; you can redistribute it and/or
*		modify it under the terms of the GNU General Public License
*		as published by the Free Software Foundation; either version
*		2 of the License, or (at your option) any later version.
* ============================================================================
* 2001/05/09	acme		Fix MODULE_DESC for debug, .bss nitpicks,
* 				some cleanups
* 2000/07/13	acme		remove useless #ifdef MODULE and crap
*				#if KERNEL_VERSION > blah
* 2000/07/06	acme		__exit at cyclomx_cleanup
* 2000/04/02	acme		dprintk and cycx_debug
* 				module_init/module_exit
* 2000/01/21	acme		rename cyclomx_open to cyclomx_mod_inc_use_count
*				and cyclomx_close to cyclomx_mod_dec_use_count
* 2000/01/08	acme		cleanup
* 1999/11/06	acme		cycx_down back to life (it needs to be
*				called to iounmap the dpmbase)
* 1999/08/09	acme		removed references to enable_tx_int
*				use spinlocks instead of cli/sti in
*				cyclomx_set_state
* 1999/05/19	acme		works directly linked into the kernel
*				init_waitqueue_head for 2.3.* kernel
* 1999/05/18	acme		major cleanup (polling not needed), etc
* 1998/08/28	acme		minor cleanup (ioctls for firmware deleted)
*				queue_task activated
* 1998/08/08	acme		Initial version.
*/
 
#include <linux/config.h>	/* OS configuration options */
#include <linux/stddef.h>	/* offsetof(), etc. */
#include <linux/errno.h>	/* return codes */
#include <linux/string.h>	/* inline memset(), etc. */
#include <linux/slab.h>		/* kmalloc(), kfree() */
#include <linux/kernel.h>	/* printk(), and other useful stuff */
#include <linux/module.h>	/* support for loadable modules */
#include <linux/ioport.h>	/* request_region(), release_region() */
#include <linux/tqueue.h>	/* for kernel task queues */
#include <linux/wanrouter.h>	/* WAN router definitions */
#include <linux/cyclomx.h>	/* cyclomx common user API definitions */
#include <asm/uaccess.h>	/* kernel <-> user copy */
#include <linux/init.h>         /* __init (when not using as a module) */
 
/* Debug */
 
unsigned int cycx_debug;
 
MODULE_AUTHOR("Arnaldo Carvalho de Melo");
MODULE_DESCRIPTION("Cyclom 2X Sync Card Driver.");
MODULE_LICENSE("GPL");
MODULE_PARM(cycx_debug, "i");
MODULE_PARM_DESC(cycx_debug, "cyclomx debug level");
 
/* Defines & Macros */
 
#define	DRV_VERSION	0		/* version number */
#define	DRV_RELEASE	10		/* release (minor version) number */
#define	MAX_CARDS	1		/* max number of adapters */
 
#define	CONFIG_CYCLOMX_CARDS 1
 
/* Function Prototypes */
 
/* WAN link driver entry points */
static int setup (wan_device_t *wandev, wandev_conf_t *conf);
static int shutdown (wan_device_t *wandev);
static int ioctl (wan_device_t *wandev, unsigned cmd, unsigned long arg);
 
/* Miscellaneous functions */
static void cycx_isr (int irq, void *dev_id, struct pt_regs *regs);
 
/* Global Data
 * Note: All data must be explicitly initialized!!!
 */
 
/* private data */
static char drvname[]	= "cyclomx";
static char fullname[]	= "CYCLOM 2X(tm) Sync Card Driver";
static char copyright[] = "(c) 1998-2001 Arnaldo Carvalho de Melo "
			  "<acme@conectiva.com.br>";
static int ncards = CONFIG_CYCLOMX_CARDS;
static cycx_t *card_array;	/* adapter data space */
 
/* Kernel Loadable Module Entry Points */
 
/*
 * Module 'insert' entry point.
 * o print announcement
 * o allocate adapter data space
 * o initialize static data
 * o register all cards with WAN router
 * o calibrate Cyclom 2X shared memory access delay.
 *
 * Return:	0	Ok
 *		< 0	error.
 * Context:	process
 */
int __init cyclomx_init (void)
{
	int cnt, err = -ENOMEM;
 
	printk(KERN_INFO "%s v%u.%u %s\n",
		fullname, DRV_VERSION, DRV_RELEASE, copyright);
 
	/* Verify number of cards and allocate adapter data space */
	ncards = min_t(int, ncards, MAX_CARDS);
	ncards = max_t(int, ncards, 1);
	card_array = kmalloc(sizeof(cycx_t) * ncards, GFP_KERNEL);
	if (!card_array)
		goto out;
 
	memset(card_array, 0, sizeof(cycx_t) * ncards);
 
	/* Register adapters with WAN router */
	for (cnt = 0; cnt < ncards; ++cnt) {
		cycx_t *card = &card_array[cnt];
		wan_device_t *wandev = &card->wandev;
 
		sprintf(card->devname, "%s%d", drvname, cnt + 1);
		wandev->magic    = ROUTER_MAGIC;
		wandev->name     = card->devname;
		wandev->private  = card;
		wandev->setup    = setup;
		wandev->shutdown = shutdown;
		wandev->ioctl    = ioctl;
		err = register_wan_device(wandev);
 
		if (err) {
			printk(KERN_ERR "%s: %s registration failed with "
					"error %d!\n",
					drvname, card->devname, err);
			break;
		}
	}
 
	err = -ENODEV;
	if (!cnt) {
		kfree(card_array);
		goto out;
	}
	err = 0;
	ncards = cnt;	/* adjust actual number of cards */
out:	return err;
}
 
/*
 * Module 'remove' entry point.
 * o unregister all adapters from the WAN router
 * o release all remaining system resources
 */
static void __exit cyclomx_cleanup (void)
{
	int i = 0;
 
	for (; i < ncards; ++i) {
		cycx_t *card = &card_array[i];
		unregister_wan_device(card->devname);
	}
 
	kfree(card_array);
}
 
/* WAN Device Driver Entry Points */
/*
 * Setup/configure WAN link driver.
 * o check adapter state
 * o make sure firmware is present in configuration
 * o allocate interrupt vector
 * o setup Cyclom 2X hardware
 * o call appropriate routine to perform protocol-specific initialization
 *
 * This function is called when router handles ROUTER_SETUP IOCTL. The
 * configuration structure is in kernel memory (including extended data, if
 * any).
 */
static int setup (wan_device_t *wandev, wandev_conf_t *conf)
{
	int err = -EFAULT;
	cycx_t *card;
	int irq;
 
	/* Sanity checks */
 
	if (!wandev || !wandev->private || !conf)
		goto out;
 
	card = wandev->private;
	err = -EBUSY;
	if (wandev->state != WAN_UNCONFIGURED)
		goto out;
 
	err = -EINVAL;
	if (!conf->data_size || !conf->data) {
		printk(KERN_ERR "%s: firmware not found in configuration "
				"data!\n", wandev->name);
		goto out;
	}
 
	if (conf->irq <= 0) {
		printk(KERN_ERR "%s: can't configure without IRQ!\n",
				wandev->name);
		goto out;
	}
 
	/* Allocate IRQ */
	irq = conf->irq == 2 ? 9 : conf->irq;	/* IRQ2 -> IRQ9 */
 
	if (request_irq(irq, cycx_isr, 0, wandev->name, card)) {
		printk(KERN_ERR "%s: can't reserve IRQ %d!\n",
				wandev->name, irq);
		goto out;
	}
 
	/* Configure hardware, load firmware, etc. */
	memset(&card->hw, 0, sizeof(cycxhw_t));
	card->hw.irq	 = irq;
	card->hw.dpmbase = conf->maddr;
	card->hw.dpmsize = CYCX_WINDOWSIZE;
	card->hw.fwid	 = CFID_X25_2X;
	card->lock	 = SPIN_LOCK_UNLOCKED;
	init_waitqueue_head(&card->wait_stats);
 
	err = cycx_setup(&card->hw, conf->data, conf->data_size);
	if (err)
		goto out_irq;
 
	/* Initialize WAN device data space */
	wandev->irq       = irq;
	wandev->dma       = wandev->ioport = 0;
	wandev->maddr     = card->hw.dpmbase;
	wandev->msize     = card->hw.dpmsize;
	wandev->hw_opt[2] = 0;
	wandev->hw_opt[3] = card->hw.fwid;
 
	/* Protocol-specific initialization */
	switch (card->hw.fwid) {
#ifdef CONFIG_CYCLOMX_X25
		case CFID_X25_2X:
			err = cyx_init(card, conf);
			break;
#endif
		default:
			printk(KERN_ERR "%s: this firmware is not supported!\n",
					wandev->name);
			err = -EINVAL;
	}
 
	if (err) {
		cycx_down(&card->hw);
		goto out_irq;
	}
 
	err = 0;
out:	return err;
out_irq:
	free_irq(irq, card);
	goto out;
}
 
/*
 * Shut down WAN link driver. 
 * o shut down adapter hardware
 * o release system resources.
 *
 * This function is called by the router when device is being unregistered or
 * when it handles ROUTER_DOWN IOCTL.
 */
static int shutdown (wan_device_t *wandev)
{
	int ret = -EFAULT;
	cycx_t *card;
 
	/* sanity checks */
	if (!wandev || !wandev->private)
		goto out;
 
	ret = 0;
	if (wandev->state == WAN_UNCONFIGURED)
		goto out;
 
	card = wandev->private;
	wandev->state = WAN_UNCONFIGURED;
	cycx_down(&card->hw);
	printk(KERN_INFO "%s: irq %d being freed!\n", wandev->name,
			wandev->irq);
	free_irq(wandev->irq, card);
out:	return ret;
}
 
/*
 * Driver I/O control. 
 * o verify arguments
 * o perform requested action
 *
 * This function is called when router handles one of the reserved user
 * IOCTLs.  Note that 'arg' still points to user address space.
 *
 * no reserved ioctls for the cyclom 2x up to now
 */
static int ioctl (wan_device_t *wandev, unsigned cmd, unsigned long arg)
{
	return -EINVAL;
}
 
/* Miscellaneous */
/*
 * Cyclom 2X Interrupt Service Routine.
 * o acknowledge Cyclom 2X hardware interrupt.
 * o call protocol-specific interrupt service routine, if any.
 */
static void cycx_isr (int irq, void *dev_id, struct pt_regs *regs)
{
	cycx_t *card = (cycx_t *)dev_id;
 
	if (!card || card->wandev.state == WAN_UNCONFIGURED)
		goto out;
 
	if (card->in_isr) {
		printk(KERN_WARNING "%s: interrupt re-entrancy on IRQ %d!\n",
				    card->devname, card->wandev.irq);
		goto out;
	}
 
	if (card->isr)
		card->isr(card);
out:	return;
}
 
/*
 * This routine is called by the protocol-specific modules when network
 * interface is being open.  The only reason we need this, is because we
 * have to call MOD_INC_USE_COUNT, but cannot include 'module.h' where it's
 * defined more than once into the same kernel module.
 */
void cyclomx_mod_inc_use_count (cycx_t *card)
{
	++card->open_cnt;
	MOD_INC_USE_COUNT;
}
 
/*
 * This routine is called by the protocol-specific modules when network
 * interface is being closed.  The only reason we need this, is because we
 * have to call MOD_DEC_USE_COUNT, but cannot include 'module.h' where it's
 * defined more than once into the same kernel module.
 */
void cyclomx_mod_dec_use_count (cycx_t *card)
{
	--card->open_cnt;
	MOD_DEC_USE_COUNT;
}
 
/* Set WAN device state.  */
void cyclomx_set_state (cycx_t *card, int state)
{
	unsigned long flags;
	char *string_state = NULL;
 
	spin_lock_irqsave(&card->lock, flags);
 
	if (card->wandev.state != state) {
		switch (state) {
			case WAN_CONNECTED:
				string_state = "connected!";
				break;
 
			case WAN_DISCONNECTED:
				string_state = "disconnected!";
				break;
		}
 
		printk(KERN_INFO "%s: link %s\n", card->devname, string_state);
		card->wandev.state = state;
	}
 
	card->state_tick = jiffies;
	spin_unlock_irqrestore(&card->lock, flags);
}
 
module_init(cyclomx_init);
module_exit(cyclomx_cleanup);