URL
https://opencores.org/ocsvn/or1k/or1k/trunk
Subversion Repositories or1k
[/] [or1k/] [trunk/] [linux/] [linux-2.4/] [drivers/] [pcmcia/] [sa1100_freebird.c] - Rev 1765
Compare with Previous | Blame | View Log
/* * drivers/pcmcia/sa1100_freebird.c * * Created by Eric Peng <ericpeng@coventive.com> * */ #include <linux/kernel.h> #include <linux/sched.h> #include <asm/hardware.h> #include <asm/irq.h> #include "sa1100_generic.h" static int freebird_pcmcia_init(struct pcmcia_init *init){ int irq, res; /* Enable Linkup CF card */ LINKUP_PRC = 0xc0; mdelay(100); LINKUP_PRC = 0xc1; mdelay(100); LINKUP_PRC = 0xd1; mdelay(100); LINKUP_PRC = 0xd1; mdelay(100); LINKUP_PRC = 0xc0; /* Set transition detect */ //set_GPIO_IRQ_edge( GPIO_CF_CD|GPIO_CF_BVD2|GPIO_CF_BVD1, GPIO_BOTH_EDGES ); //set_GPIO_IRQ_edge( GPIO_CF_IRQ, GPIO_FALLING_EDGE ); set_GPIO_IRQ_edge(GPIO_FREEBIRD_CF_CD|GPIO_FREEBIRD_CF_BVD,GPIO_NO_EDGES); set_GPIO_IRQ_edge(GPIO_FREEBIRD_CF_IRQ, GPIO_FALLING_EDGE); /* Register interrupts */ irq = IRQ_GPIO_FREEBIRD_CF_CD; res = request_irq( irq, init->handler, SA_INTERRUPT, "CF_CD", NULL ); if( res < 0 ) goto irq_err; irq = IRQ_GPIO_FREEBIRD_CF_BVD; res = request_irq( irq, init->handler, SA_INTERRUPT, "CF_BVD1", NULL ); if( res < 0 ) goto irq_err; /* There's only one slot, but it's "Slot 1": */ return 2; irq_err: printk( KERN_ERR "%s: Request for IRQ %lu failed\n", __FUNCTION__, irq ); return -1; } static int freebird_pcmcia_shutdown(void) { /* disable IRQs */ free_irq( IRQ_GPIO_FREEBIRD_CF_CD, NULL ); free_irq( IRQ_GPIO_FREEBIRD_CF_BVD, NULL ); /* Disable CF card */ LINKUP_PRC = 0x40; /* SSP=1 SOE=0 */ mdelay(100); return 0; } static int freebird_pcmcia_socket_state(struct pcmcia_state_array *state_array){ unsigned long levels; if(state_array->size<2) return -1; memset(state_array->state, 0, (state_array->size)*sizeof(struct pcmcia_state)); levels = LINKUP_PRS; //printk("LINKUP_PRS=%x \n",levels); state_array->state[0].detect= ((levels & (LINKUP_CD1 | LINKUP_CD2))==0)?1:0; state_array->state[0].ready=(levels & LINKUP_RDY)?1:0; state_array->state[0].bvd1=(levels & LINKUP_BVD1)?1:0; state_array->state[0].bvd2=(levels & LINKUP_BVD2)?1:0; state_array->state[0].wrprot=0; /* Not available on Assabet. */ state_array->state[0].vs_3v=1; /* Can only apply 3.3V on Assabet. */ state_array->state[0].vs_Xv=0; return 1; } static int freebird_pcmcia_get_irq_info(struct pcmcia_irq_info *info){ if(info->sock>1) return -1; if(info->sock==0) info->irq=IRQ_GPIO_FREEBIRD_CF_IRQ; return 0; } static int freebird_pcmcia_configure_socket(const struct pcmcia_configure *configure) { unsigned long value, flags; if(configure->sock>1) return -1; if(configure->sock==1) return 0; save_flags_cli(flags); value = 0xc0; /* SSP=1 SOE=1 CFE=1 */ switch(configure->vcc){ case 0: break; case 50: printk(KERN_WARNING "%s(): CS asked for 5V, applying 3.3V...\n", __FUNCTION__); case 33: /* Can only apply 3.3V to the CF slot. */ value |= LINKUP_S1; break; default: printk(KERN_ERR "%s(): unrecognized Vcc %u\n", __FUNCTION__, configure->vcc); restore_flags(flags); return -1; } if (configure->reset) value = (configure->reset) ? (value | LINKUP_RESET) : (value & ~LINKUP_RESET); /* Silently ignore Vpp, output enable, speaker enable. */ LINKUP_PRC = value; //printk("LINKUP_PRC=%x\n",value); restore_flags(flags); return 0; } static int freebird_pcmcia_socket_init(int sock) { set_GPIO_IRQ_edge(GPIO_FREEBIRD_CF_CD|GPIO_FREEBIRD_CF_BVD, GPIO_BOTH_EDGES); return 0; } static int freebird_pcmcia_socket_suspend(int sock) { set_GPIO_IRQ_edge(GPIO_FREEBIRD_CF_CD|GPIO_FREEBIRD_CF_BVD, GPIO_NO_EDGES); return 0; } struct pcmcia_low_level freebird_pcmcia_ops = { init: freebird_pcmcia_init, shutdown: freebird_pcmcia_shutdown, socket_state: freebird_pcmcia_socket_state, get_irq_info: freebird_pcmcia_get_irq_info, configure_socket: freebird_pcmcia_configure_socket, socket_init: freebird_pcmcia_socket_init, socket_suspend: freebird_pcmcia_socket_suspend, };