Subversion Repositories or1k

/*
 *  drivers/s390/char/con3215.c
 *    3215 line mode terminal driver.
 *
 *  S390 version
 *    Copyright (C) 1999,2000 IBM Deutschland Entwicklung GmbH, IBM Corporation
 *    Author(s): Martin Schwidefsky (schwidefsky@de.ibm.com),
 *
 *  Updated:
 *   Aug-2000: Added tab support
 *             Dan Morrison, IBM Corporation (dmorriso@cse.buffalo.edu)
 */
 
#include <linux/config.h>
#include <linux/types.h>
#include <linux/kdev_t.h>
#include <linux/tty.h>
#include <linux/vt_kern.h>
#include <linux/init.h>
#include <linux/console.h>
#include <linux/interrupt.h>
 
#include <linux/slab.h>
#include <linux/bootmem.h>
#include <linux/devfs_fs_kernel.h>
 
#include <asm/io.h>
#include <asm/ebcdic.h>
#include <asm/uaccess.h>
#include <asm/delay.h>
#include <asm/cpcmd.h>
#include <asm/irq.h>
#include <asm/setup.h>
 
#include "ctrlchar.h"
 
#define NR_3215		    1
#define NR_3215_REQ	    (4*NR_3215)
#define RAW3215_BUFFER_SIZE 65536     /* output buffer size */
#define RAW3215_INBUF_SIZE  256	      /* input buffer size */
#define RAW3215_MIN_SPACE   128	      /* minimum free space for wakeup */
#define RAW3215_MIN_WRITE   1024      /* min. length for immediate output */
#define RAW3215_MAX_BYTES   3968      /* max. bytes to write with one ssch */
#define RAW3215_MAX_NEWLINE 50        /* max. lines to write with one ssch */
#define RAW3215_NR_CCWS	    3
#define RAW3215_TIMEOUT	    HZ/10     /* time for delayed output */
 
#define RAW3215_FIXED	    1	      /* 3215 console device is not be freed */
#define RAW3215_ACTIVE	    2	      /* set if the device is in use */
#define RAW3215_WORKING	    4	      /* set if a request is being worked on */
#define RAW3215_THROTTLED   8	      /* set if reading is disabled */
#define RAW3215_STOPPED	    16	      /* set if writing is disabled */
#define RAW3215_CLOSING	    32	      /* set while in close process */
#define RAW3215_TIMER_RUNS  64	      /* set if the output delay timer is on */
#define RAW3215_FLUSHING    128	      /* set to flush buffer (no delay) */
#define RAW3215_BH_PENDING  256       /* indication for bh scheduling */
 
#define TAB_STOP_SIZE	    8         /* tab stop size */
 
struct _raw3215_info;		      /* forward declaration ... */
 
int raw3215_condevice = -1;           /* preset console device */
 
/*
 * Request types for a 3215 device
 */
typedef enum {
	RAW3215_FREE, RAW3215_READ, RAW3215_WRITE
} raw3215_type;
 
/*
 * Request structure for a 3215 device
 */
typedef struct _raw3215_req {
	raw3215_type type;	      /* type of the request */
	int start, len;		      /* start index & len in output buffer */
        int delayable;                /* indication to wait for more data */
	int residual;		      /* residual count for read request */
	ccw1_t ccws[RAW3215_NR_CCWS]; /* space for the channel program */
	struct _raw3215_info *info;   /* pointer to main structure */
	struct _raw3215_req *next;    /* pointer to next request */
} raw3215_req  __attribute__ ((aligned(8)));
 
typedef struct _raw3215_info {
	int flags;		      /* state flags */
	int irq;		      /* interrupt number to do_IO */
	char *buffer;		      /* pointer to output buffer */
	char *inbuf;		      /* pointer to input buffer */
	int head;		      /* first free byte in output buffer */
	int count;		      /* number of bytes in output buffer */
        int written;                  /* number of bytes in write requests */
	devstat_t devstat;	      /* device status structure for do_IO */
	struct tty_struct *tty;	      /* pointer to tty structure if present */
	struct tq_struct tqueue;      /* task queue to bottom half */
	raw3215_req *queued_read;     /* pointer to queued read requests */
	raw3215_req *queued_write;    /* pointer to queued write requests */
	wait_queue_head_t empty_wait; /* wait queue for flushing */
	struct timer_list timer;      /* timer for delayed output */
	char *message;                /* pending message from raw3215_irq */
	int msg_dstat;                /* dstat for pending message */
	int msg_cstat;                /* cstat for pending message */
	int line_pos;		      /* position on the line (for tabs) */
} raw3215_info;
 
static raw3215_info *raw3215[NR_3215];	/* array of 3215 devices structures */
static raw3215_req *raw3215_freelist;	/* list of free request structures */
static spinlock_t raw3215_freelist_lock;/* spinlock to protect free list */
 
static struct tty_driver tty3215_driver;
static struct tty_struct *tty3215_table[NR_3215];
static struct termios *tty3215_termios[NR_3215];
static struct termios *tty3215_termios_locked[NR_3215];
static int tty3215_refcount;
 
#ifndef MIN
#define MIN(a,b)	((a) < (b) ? (a) : (b))
#endif
 
/*
 * Get a request structure from the free list
 */
static inline raw3215_req *raw3215_alloc_req(void) {
	raw3215_req *req;
	unsigned long flags;
 
	spin_lock_irqsave(&raw3215_freelist_lock, flags);
	req = raw3215_freelist;
	raw3215_freelist = req->next;
	spin_unlock_irqrestore(&raw3215_freelist_lock, flags);
	return req;
}
 
/*
 * Put a request structure back to the free list
 */
static inline void raw3215_free_req(raw3215_req *req) {
	unsigned long flags;
 
        if (req->type == RAW3215_FREE)
                return;         /* don't free a free request */
        req->type = RAW3215_FREE;
	spin_lock_irqsave(&raw3215_freelist_lock, flags);
	req->next = raw3215_freelist;
	raw3215_freelist = req;
	spin_unlock_irqrestore(&raw3215_freelist_lock, flags);
}
 
/*
 * Set up a read request that reads up to 160 byte from the 3215 device.
 * If there is a queued read request it is used, but that shouldn't happen
 * because a 3215 terminal won't accept a new read before the old one is
 * completed.
 */
static void raw3215_mk_read_req(raw3215_info *raw)
{
	raw3215_req *req;
        ccw1_t *ccw;
 
	/* there can only be ONE read request at a time */
	req = raw->queued_read;
	if (req == NULL) {
		/* no queued read request, use new req structure */
		req = raw3215_alloc_req();
		req->type = RAW3215_READ;
		req->info = raw;
                raw->queued_read = req;
	}
 
        ccw = req->ccws;
        ccw->cmd_code = 0x0A; /* read inquiry */
        ccw->flags = 0x20;    /* ignore incorrect length */
        ccw->count = 160;
        ccw->cda = (__u32) __pa(raw->inbuf);
}
 
/*
 * Set up a write request with the information from the main structure.
 * A ccw chain is created that writes as much as possible from the output
 * buffer to the 3215 device. If a queued write exists it is replaced by
 * the new, probably lengthened request.
 */
static void raw3215_mk_write_req(raw3215_info *raw)
{
        raw3215_req *req;
	ccw1_t *ccw;
	int len, count, ix, lines;
 
        if (raw->count <= raw->written)
                return;
        /* check if there is a queued write request */
        req = raw->queued_write;
        if (req == NULL) {
                /* no queued write request, use new req structure */
                req = raw3215_alloc_req();
                req->type = RAW3215_WRITE;
                req->info = raw;
                raw->queued_write = req;
        } else {
                raw->written -= req->len;
        }
 
	ccw = req->ccws;
        req->start = (raw->head - raw->count + raw->written) &
                     (RAW3215_BUFFER_SIZE - 1);
        /*
         * now we have to count newlines. We can at max accept
         * RAW3215_MAX_NEWLINE newlines in a single ssch due to
         * a restriction in VM
         */
        lines = 0;
        ix = req->start;
        while (lines < RAW3215_MAX_NEWLINE && ix != raw->head) {
                if (raw->buffer[ix] == 0x15)
                        lines++;
                ix = (ix + 1) & (RAW3215_BUFFER_SIZE - 1);
        }
	len = ((ix - 1 - req->start) & (RAW3215_BUFFER_SIZE - 1)) + 1;
        if (len > RAW3215_MAX_BYTES)
                len = RAW3215_MAX_BYTES;
        req->len = len;
        raw->written += len;
 
        /* set the indication if we should try to enlarge this request */
        req->delayable = (ix == raw->head) && (len < RAW3215_MIN_WRITE);
 
	ix = req->start;
	while (len > 0) {
		if (ccw > req->ccws)
			ccw[-1].flags |= 0x40; /* use command chaining */
		ccw->cmd_code = 0x01; /* write, auto carrier return */
		ccw->flags = 0x20;    /* ignore incorrect length ind.  */
		ccw->cda =
			(__u32) __pa(raw->buffer + ix);
		count = len;
		if (ix + count > RAW3215_BUFFER_SIZE)
			count = RAW3215_BUFFER_SIZE - ix;
		ccw->count = count;
		len -= count;
		ix = (ix + count) & (RAW3215_BUFFER_SIZE - 1);
		ccw++;
	}
        /*
         * Add a NOP to the channel program. 3215 devices are purely
         * emulated and its much better to avoid the channel end
         * interrupt in this case.
         */
        if (ccw > req->ccws)
                ccw[-1].flags |= 0x40; /* use command chaining */
        ccw->cmd_code = 0x03; /* NOP */
        ccw->flags = 0;
        ccw->cda = 0;
        ccw->count = 1;
}
 
/*
 * Start a read or a write request
 */
static void raw3215_start_io(raw3215_info *raw)
{
	raw3215_req *req;
	int res;
 
	req = raw->queued_read;
	if (req != NULL &&
	    !(raw->flags & (RAW3215_WORKING | RAW3215_THROTTLED))) {
		/* dequeue request */
		raw->queued_read = NULL;
		res = do_IO(raw->irq, req->ccws, (unsigned long) req, 0, 0);
		if (res != 0) {
			/* do_IO failed, put request back to queue */
			raw->queued_read = req;
		} else {
			raw->flags |= RAW3215_WORKING;
		} 
	}
	req = raw->queued_write;
	if (req != NULL &&
	    !(raw->flags & (RAW3215_WORKING | RAW3215_STOPPED))) {
		/* dequeue request */
		raw->queued_write = NULL;
		res = do_IO(raw->irq, req->ccws, (unsigned long) req, 0, 0);
		if (res != 0) {
			/* do_IO failed, put request back to queue */
			raw->queued_write = req;
		} else {
			raw->flags |= RAW3215_WORKING;
		}
	}
}
 
/*
 * Function to start a delayed output after RAW3215_TIMEOUT seconds
 */
static void raw3215_timeout(unsigned long __data)
{
	raw3215_info *raw = (raw3215_info *) __data;
	unsigned long flags;
 
	s390irq_spin_lock_irqsave(raw->irq, flags);
	if (raw->flags & RAW3215_TIMER_RUNS) {
		del_timer(&raw->timer);
		raw->flags &= ~RAW3215_TIMER_RUNS;
                raw3215_mk_write_req(raw);
		raw3215_start_io(raw);
	}
	s390irq_spin_unlock_irqrestore(raw->irq, flags);
}
 
/*
 * Function to conditionally start an IO. A read is started immediatly,
 * a write is only started immediatly if the flush flag is on or the
 * amount of data is bigger than RAW3215_MIN_WRITE. If a write is not
 * done immediatly a timer is started with a delay of RAW3215_TIMEOUT.
 */
static inline void raw3215_try_io(raw3215_info *raw)
{
	if (!(raw->flags & RAW3215_ACTIVE))
		return;
	if (raw->queued_read != NULL)
		raw3215_start_io(raw);
	else if (raw->queued_write != NULL) {
		if ((raw->queued_write->delayable == 0) ||
		    (raw->flags & RAW3215_FLUSHING)) {
			/* execute write requests bigger than minimum size */
                        raw3215_start_io(raw);
			if (raw->flags & RAW3215_TIMER_RUNS) {
				del_timer(&raw->timer);
				raw->flags &= ~RAW3215_TIMER_RUNS;
			}
		} else if (!(raw->flags & RAW3215_TIMER_RUNS)) {
			/* delay small writes */
			init_timer(&raw->timer);
			raw->timer.expires = RAW3215_TIMEOUT + jiffies;
			raw->timer.data = (unsigned long) raw;
			raw->timer.function = raw3215_timeout;
			add_timer(&raw->timer);
			raw->flags |= RAW3215_TIMER_RUNS;
		}
	}
}
 
/*
 * The bottom half handler routine for 3215 devices. It tries to start
 * the next IO and wakes up processes waiting on the tty.
 */
static void raw3215_softint(void *data)
{
	raw3215_info *raw;
	struct tty_struct *tty;
	unsigned long flags;
 
	raw = (raw3215_info *) data;
	s390irq_spin_lock_irqsave(raw->irq, flags);
        raw3215_mk_write_req(raw);
        raw3215_try_io(raw);
        raw->flags &= ~RAW3215_BH_PENDING;
	s390irq_spin_unlock_irqrestore(raw->irq, flags);
	/* Check for pending message from raw3215_irq */
	if (raw->message != NULL) {
		printk(raw->message, raw->irq, raw->msg_dstat, raw->msg_cstat);
		raw->message = NULL;
	}
	tty = raw->tty;
	if (tty != NULL &&
	    RAW3215_BUFFER_SIZE - raw->count >= RAW3215_MIN_SPACE) {
		if ((tty->flags & (1 << TTY_DO_WRITE_WAKEUP)) &&
		    tty->ldisc.write_wakeup)
			(tty->ldisc.write_wakeup)(tty);
		wake_up_interruptible(&tty->write_wait);
	}
}
 
/*
 * Function to safely add raw3215_softint to tq_immediate.
 * The s390irq spinlock must be held.
 */
static inline void raw3215_sched_bh(raw3215_info *raw)
{
        if (raw->flags & RAW3215_BH_PENDING)
                return;       /* already pending */
        raw->flags |= RAW3215_BH_PENDING;
	INIT_LIST_HEAD(&raw->tqueue.list);
	raw->tqueue.sync = 0;
        raw->tqueue.routine = raw3215_softint;
        raw->tqueue.data = raw;
        queue_task(&raw->tqueue, &tq_immediate);
        mark_bh(IMMEDIATE_BH);
}
 
/*
 * Find the raw3215_info structure associated with irq
 */
static inline raw3215_info *raw3215_find_info(int irq) {
	raw3215_info *raw;
	int i;
 
	for (i = 0; i < NR_3215; i++) {
		raw = raw3215[i];
		if (raw != NULL && raw->irq == irq &&
		    (raw->flags & RAW3215_ACTIVE))
			break;
	}
	return (i >= NR_3215) ? NULL : raw;
}
 
/*
 * Interrupt routine, called from Ingo's I/O layer
 */
static void raw3215_irq(int irq, void *int_parm, struct pt_regs *regs)
{
	raw3215_info *raw;
	raw3215_req *req;
	struct tty_struct *tty;
	devstat_t *stat;
        int cstat, dstat;
	int count, slen;
 
	stat = (devstat_t *) int_parm;
	req = (raw3215_req *) stat->intparm;
	cstat = stat->cstat;
	dstat = stat->dstat;
	if (cstat != 0) {
		raw = raw3215_find_info(irq);
		if (raw != NULL) {
			raw->message = KERN_WARNING
				"Got nonzero channel status in raw3215_irq "
				"(dev %i, dev sts 0x%2x, sch sts 0x%2x)";
			raw->msg_dstat = dstat;
			raw->msg_cstat = cstat;
                        raw3215_sched_bh(raw);
		}
	}
        if (dstat & 0x01) { /* we got a unit exception */
		dstat &= ~0x01;  /* we can ignore it */
        }
	switch (dstat) {
	case 0x80:
		if (cstat != 0)
			break;
		/* Attention interrupt, someone hit the enter key */
		if ((raw = raw3215_find_info(irq)) == NULL)
			return;              /* That shouldn't happen ... */
		/* Setup a read request */
		raw3215_mk_read_req(raw);
                if (MACHINE_IS_P390)
                        memset(raw->inbuf, 0, RAW3215_INBUF_SIZE);
                raw3215_sched_bh(raw);
		break;
	case 0x08:
	case 0x0C:
		/* Channel end interrupt. */
		if ((raw = req->info) == NULL)
                        return;              /* That shouldn't happen ... */
		if (req->type == RAW3215_READ) {
			/* store residual count, then wait for device end */
			req->residual = stat->rescnt;
		}
		if (dstat == 0x08)
			break;
	case 0x04:
		/* Device end interrupt. */
                if ((raw = req->info) == NULL)
                        return;              /* That shouldn't happen ... */
		if (req->type == RAW3215_READ && raw->tty != NULL) {
			unsigned int cchar;
 
			tty = raw->tty;
			count = 160 - req->residual;
			if (MACHINE_IS_P390) {
				slen = strnlen(raw->inbuf, RAW3215_INBUF_SIZE);
				if (count > slen)
					count = slen;
			} else
			if (count >= TTY_FLIPBUF_SIZE - tty->flip.count)
				count = TTY_FLIPBUF_SIZE - tty->flip.count - 1;
			EBCASC(raw->inbuf, count);
			cchar = ctrlchar_handle(raw->inbuf, count, tty);
			switch (cchar & CTRLCHAR_MASK) {
			case CTRLCHAR_SYSRQ:
				break;
 
			case CTRLCHAR_CTRL:
				tty->flip.count++;
				*tty->flip.flag_buf_ptr++ = TTY_NORMAL;
				*tty->flip.char_buf_ptr++ = cchar;
				tty_flip_buffer_push(raw->tty);
				break;
 
			case CTRLCHAR_NONE:
				memcpy(tty->flip.char_buf_ptr,
				       raw->inbuf, count);
				if (count < 2 ||
				    (strncmp(raw->inbuf+count-2, "^n", 2) && 
				    strncmp(raw->inbuf+count-2, "\252n", 2)) ) {
					/* don't add the auto \n */
					tty->flip.char_buf_ptr[count] = '\n';
					memset(tty->flip.flag_buf_ptr,
					       TTY_NORMAL, count + 1);
					count++;
				} else
					count-=2;
				tty->flip.char_buf_ptr += count;
				tty->flip.flag_buf_ptr += count;
				tty->flip.count += count;
				tty_flip_buffer_push(raw->tty);
				break;
			}
		} else if (req->type == RAW3215_WRITE) {
			raw->count -= req->len;
                        raw->written -= req->len;
		} 
		raw->flags &= ~RAW3215_WORKING;
		raw3215_free_req(req);
		/* check for empty wait */
		if (waitqueue_active(&raw->empty_wait) &&
		    raw->queued_write == NULL &&
		    raw->queued_read == NULL) {
			wake_up_interruptible(&raw->empty_wait);
		}
                raw3215_sched_bh(raw);
		break;
	default:
		/* Strange interrupt, I'll do my best to clean up */
                if ((raw = raw3215_find_info(irq)) == NULL)
                        return;              /* That shouldn't happen ... */
                if (raw == NULL) break;
		if (req != NULL && req->type != RAW3215_FREE) {
		        if (req->type == RAW3215_WRITE) {
			        raw->count -= req->len;
                                raw->written -= req->len;
                        }
                        raw->flags &= ~RAW3215_WORKING;
                        raw3215_free_req(req);
		}
		raw->message = KERN_WARNING
			"Spurious interrupt in in raw3215_irq "
			"(dev %i, dev sts 0x%2x, sch sts 0x%2x)";
		raw->msg_dstat = dstat;
		raw->msg_cstat = cstat;
                raw3215_sched_bh(raw);
	}
	return;
}
 
/*
 * Wait until length bytes are available int the output buffer.
 * Has to be called with the s390irq lock held. Can be called
 * disabled.
 */
void raw3215_make_room(raw3215_info *raw, unsigned int length)
{
	while (RAW3215_BUFFER_SIZE - raw->count < length) {
		/* there might be a request pending */
		raw->flags |= RAW3215_FLUSHING;
		raw3215_mk_write_req(raw);
		raw3215_try_io(raw);
		raw->flags &= ~RAW3215_FLUSHING;
		if (wait_cons_dev(raw->irq) != 0) {
			/* that shouldn't happen */
			raw->count = 0;
			raw->written = 0;
		}
		/* Enough room freed up ? */
		if (RAW3215_BUFFER_SIZE - raw->count >= length)
			break;
		/* there might be another cpu waiting for the lock */
		s390irq_spin_unlock(raw->irq);
		udelay(100);
		s390irq_spin_lock(raw->irq);
	}
}
 
/*
 * String write routine for 3215 devices
 */
static int
raw3215_write(raw3215_info *raw, const char *str,
	      int from_user, unsigned int length)
{
	unsigned long flags;
	int ret, c;
	int count;
 
	ret = 0;
	while (length > 0) {
		s390irq_spin_lock_irqsave(raw->irq, flags);
		count = (length > RAW3215_BUFFER_SIZE) ?
					     RAW3215_BUFFER_SIZE : length;
		length -= count;
 
                raw3215_make_room(raw, count);
 
		/* copy string to output buffer and convert it to EBCDIC */
		if (from_user) {
			while (1) {
				c = MIN(count,
					MIN(RAW3215_BUFFER_SIZE - raw->count,
					    RAW3215_BUFFER_SIZE - raw->head));
				if (c <= 0)
					break;
				c -= copy_from_user(raw->buffer + raw->head,
						    str, c);
				if (c == 0) {
					if (!ret)
						ret = -EFAULT;
					break;
				}
				ASCEBC(raw->buffer + raw->head, c);
				raw->head = (raw->head + c) &
					    (RAW3215_BUFFER_SIZE - 1);
				raw->count += c;
				raw->line_pos += c;
				str += c;
				count -= c;
				ret += c;
			}
		} else {
			while (1) {
				c = MIN(count,
					MIN(RAW3215_BUFFER_SIZE - raw->count,
					    RAW3215_BUFFER_SIZE - raw->head));
				if (c <= 0)
					break;
				memcpy(raw->buffer + raw->head, str, c);
				ASCEBC(raw->buffer + raw->head, c);
				raw->head = (raw->head + c) &
					    (RAW3215_BUFFER_SIZE - 1);
				raw->count += c;
				raw->line_pos += c;
				str += c;
				count -= c;
				ret += c;
			}
		}
                if (!(raw->flags & RAW3215_WORKING)) {
                        raw3215_mk_write_req(raw);
		        /* start or queue request */
		        raw3215_try_io(raw);
                }
		s390irq_spin_unlock_irqrestore(raw->irq, flags);
	}
 
	return ret;
}
 
/*
 * Put character routine for 3215 devices
 */
 
static void raw3215_putchar(raw3215_info *raw, unsigned char ch)
{
	unsigned long flags;
        unsigned int length, i;
 
	s390irq_spin_lock_irqsave(raw->irq, flags);
	if (ch == '\t') {
		length = TAB_STOP_SIZE - (raw->line_pos%TAB_STOP_SIZE);
		raw->line_pos += length;
		ch = ' ';
        } else if (ch == '\n') {
		length = 1;
		raw->line_pos = 0;
	} else {
		length = 1;
		raw->line_pos++;
	}
        raw3215_make_room(raw, length);
 
	for (i = 0; i < length; i++) {
		raw->buffer[raw->head] = (char) _ascebc[(int) ch];
		raw->head = (raw->head + 1) & (RAW3215_BUFFER_SIZE - 1);
		raw->count++;
	}
        if (!(raw->flags & RAW3215_WORKING)) {
                raw3215_mk_write_req(raw);
	        /* start or queue request */
	        raw3215_try_io(raw);
        }
	s390irq_spin_unlock_irqrestore(raw->irq, flags);
}
 
/*
 * Flush routine, it simply sets the flush flag and tries to start 
 * pending IO.
 */
static void raw3215_flush_buffer(raw3215_info *raw)
{
	unsigned long flags;
 
	s390irq_spin_lock_irqsave(raw->irq, flags);
	if (raw->count > 0) {
		raw->flags |= RAW3215_FLUSHING;
		raw3215_try_io(raw);
		raw->flags &= ~RAW3215_FLUSHING;
	}
	s390irq_spin_unlock_irqrestore(raw->irq, flags);
}
 
/*
 * Fire up a 3215 device.
 */
static int raw3215_startup(raw3215_info *raw)
{
	unsigned long flags;
 
	if (raw->flags & RAW3215_ACTIVE)
		return 0;
	if (request_irq(raw->irq, raw3215_irq, SA_INTERRUPT,
			"3215 terminal driver", &raw->devstat) != 0)
		return -1;
	raw->line_pos = 0;
	raw->flags |= RAW3215_ACTIVE;
	s390irq_spin_lock_irqsave(raw->irq, flags);
        set_cons_dev(raw->irq);
	raw3215_try_io(raw);
	s390irq_spin_unlock_irqrestore(raw->irq, flags);
 
	return 0;	
}
 
/*
 * Shutdown a 3215 device.
 */
static void raw3215_shutdown(raw3215_info *raw)
{
        DECLARE_WAITQUEUE(wait, current);
	unsigned long flags;
 
	if (!(raw->flags & RAW3215_ACTIVE) || (raw->flags & RAW3215_FIXED))
		return;
	/* Wait for outstanding requests, then free irq */
	s390irq_spin_lock_irqsave(raw->irq, flags);
	if ((raw->flags & RAW3215_WORKING) ||
	    raw->queued_write != NULL ||
	    raw->queued_read != NULL) {
		raw->flags |= RAW3215_CLOSING;
		add_wait_queue(&raw->empty_wait, &wait);
		current->state = TASK_INTERRUPTIBLE;
                s390irq_spin_unlock_irqrestore(raw->irq, flags);
		schedule();
		s390irq_spin_lock_irqsave(raw->irq, flags);
		remove_wait_queue(&raw->empty_wait, &wait);
                current->state = TASK_RUNNING;
		raw->flags &= ~(RAW3215_ACTIVE | RAW3215_CLOSING);
	}
	free_irq(raw->irq, NULL);
	s390irq_spin_unlock_irqrestore(raw->irq, flags);
}
 
static int
raw3215_find_dev(int number)
{
	s390_dev_info_t dinfo;
	int irq;
	int count;
 
	irq = get_irq_first();
	count = 0;
        while (count <= number && irq != -ENODEV) {
                if (get_dev_info(irq, &dinfo) == -ENODEV)
                        break;
                if (dinfo.devno == console_device ||
                    dinfo.sid_data.cu_type == 0x3215) {
                        count++;
                    if (count > number)
                        return irq;
                }
                irq = get_irq_next(irq);
        }
        return -1;            /* console not found */
}
 
#ifdef CONFIG_TN3215_CONSOLE
 
/*
 * Write a string to the 3215 console
 */
static void
con3215_write(struct console *co, const char *str, unsigned int count)
{
	raw3215_info *raw;
	int i;
 
	if (count <= 0)
		return;
        raw = raw3215[0];       /* console 3215 is the first one */
        while (count > 0) {
                for (i = 0; i < count; i++)
                        if (str[i] == '\t' || str[i] == '\n')
                                break;
                raw3215_write(raw, str, 0, i);
		count -= i;
		str += i;
                if (count > 0) {
			raw3215_putchar(raw, *str);
			count--;
			str++;
                }
        }
}
 
kdev_t con3215_device(struct console *c)
{
	return MKDEV(TTY_MAJOR, c->index + 64 );
}
 
/*
 * panic() calls console_unblank before the system enters a
 * disabled, endless loop.
 */
void con3215_unblank(void)
{
	raw3215_info *raw;
	unsigned long flags;
 
	raw = raw3215[0];  /* console 3215 is the first one */
	s390irq_spin_lock_irqsave(raw->irq, flags);
	raw3215_make_room(raw, RAW3215_BUFFER_SIZE);
	s390irq_spin_unlock_irqrestore(raw->irq, flags);
}
 
static int __init con3215_consetup(struct console *co, char *options)
{
	return 0;
}
 
/*
 *  The console structure for the 3215 console
 */
static struct console con3215 = {
	name:		"ttyS",
	index:		0,
	write:		con3215_write,
	device:		con3215_device,
	unblank:	con3215_unblank,
	setup:		con3215_consetup,
	flags:		CON_PRINTBUFFER,
};
 
#endif
 
/*
 * tty3215_open
 *
 * This routine is called whenever a 3215 tty is opened.
 */
static int tty3215_open(struct tty_struct *tty, struct file * filp)
{
	raw3215_info *raw;
	int retval, line;
 
	line = MINOR(tty->device) - tty->driver.minor_start;
	if ((line < 0) || (line >= NR_3215))
		return -ENODEV;
 
	raw = raw3215[line];
	if (raw == NULL) {
		raw = kmalloc(sizeof(raw3215_info) +
			      RAW3215_INBUF_SIZE, GFP_KERNEL|GFP_DMA);
		if (raw == NULL)
			return -ENOMEM;
		raw->irq = raw3215_find_dev(line);
		if (raw->irq == -1) {
			kfree(raw);
			return -ENODEV;
		}
		raw->inbuf = (char *) raw + sizeof(raw3215_info);
		memset(raw, 0, sizeof(raw3215_info));
		raw->buffer = (char *) kmalloc(RAW3215_BUFFER_SIZE,
					       GFP_KERNEL|GFP_DMA);
		if (raw->buffer == NULL) {
			kfree(raw);
			return -ENOMEM;
		}
		raw->tqueue.routine = raw3215_softint;
		raw->tqueue.data = raw;
                init_waitqueue_head(&raw->empty_wait);
		raw3215[line] = raw;
	}
 
	tty->driver_data = raw;
	raw->tty = tty;
 
	tty->low_latency = 0;  /* don't use bottom half for pushing chars */
	/*
	 * Start up 3215 device
	 */
	retval = raw3215_startup(raw);
	if (retval)
		return retval;
 
	return 0;
}
 
/*
 * tty3215_close()
 *
 * This routine is called when the 3215 tty is closed. We wait
 * for the remaining request to be completed. Then we clean up.
 */
static void tty3215_close(struct tty_struct *tty, struct file * filp)
{
	raw3215_info *raw;
 
	raw = (raw3215_info *) tty->driver_data;
	if (raw == NULL || tty->count > 1)
		return;
	tty->closing = 1;
	/* Shutdown the terminal */
	raw3215_shutdown(raw);
	tty->closing = 0;
	raw->tty = NULL;
}
 
/*
 * Returns the amount of free space in the output buffer.
 */
static int tty3215_write_room(struct tty_struct *tty)
{
	raw3215_info *raw;
 
	raw = (raw3215_info *) tty->driver_data;
 
	/* Subtract TAB_STOP_SIZE to allow for a tab, 8 <<< 64K */
	if ((RAW3215_BUFFER_SIZE - raw->count - TAB_STOP_SIZE) >= 0)
		return RAW3215_BUFFER_SIZE - raw->count - TAB_STOP_SIZE;
	else
		return 0;
}
 
/*
 * String write routine for 3215 ttys
 */
static int tty3215_write(struct tty_struct * tty, int from_user,
		    const unsigned char *buf, int count)
{
	raw3215_info *raw;
	int ret = 0;
 
	if (!tty)
		return 0;
	raw = (raw3215_info *) tty->driver_data;
	ret = raw3215_write(raw, buf, from_user, count);
	return ret;
}
 
/*
 * Put character routine for 3215 ttys
 */
static void tty3215_put_char(struct tty_struct *tty, unsigned char ch)
{
	raw3215_info *raw;
 
	if (!tty)
		return;
	raw = (raw3215_info *) tty->driver_data;
	raw3215_putchar(raw, ch);
}
 
static void tty3215_flush_chars(struct tty_struct *tty)
{
}
 
/*
 * Returns the number of characters in the output buffer
 */
static int tty3215_chars_in_buffer(struct tty_struct *tty)
{
	raw3215_info *raw;
 
	raw = (raw3215_info *) tty->driver_data;
	return raw->count;
}
 
static void tty3215_flush_buffer(struct tty_struct *tty)
{
	raw3215_info *raw;
 
	raw = (raw3215_info *) tty->driver_data;
	raw3215_flush_buffer(raw);
	wake_up_interruptible(&tty->write_wait);
	if ((tty->flags & (1 << TTY_DO_WRITE_WAKEUP)) &&
	    tty->ldisc.write_wakeup)
		(tty->ldisc.write_wakeup)(tty);
}
 
/*
 * Currently we don't have any io controls for 3215 ttys
 */
static int tty3215_ioctl(struct tty_struct *tty, struct file * file,
		    unsigned int cmd, unsigned long arg)
{
	if (tty->flags & (1 << TTY_IO_ERROR))
		return -EIO;
 
	switch (cmd) {
	default:
		return -ENOIOCTLCMD;
	}
	return 0;
}
 
/*
 * Disable reading from a 3215 tty
 */
static void tty3215_throttle(struct tty_struct * tty)
{
	raw3215_info *raw;
 
	raw = (raw3215_info *) tty->driver_data;
	raw->flags |= RAW3215_THROTTLED;
}
 
/*
 * Enable reading from a 3215 tty
 */
static void tty3215_unthrottle(struct tty_struct * tty)
{
	raw3215_info *raw;
	unsigned long flags;
 
	raw = (raw3215_info *) tty->driver_data;
	if (raw->flags & RAW3215_THROTTLED) {
		s390irq_spin_lock_irqsave(raw->irq, flags);
		raw->flags &= ~RAW3215_THROTTLED;
		raw3215_try_io(raw);
		s390irq_spin_unlock_irqrestore(raw->irq, flags);
	}
}
 
/*
 * Disable writing to a 3215 tty
 */
static void tty3215_stop(struct tty_struct *tty)
{
	raw3215_info *raw;
 
	raw = (raw3215_info *) tty->driver_data;
	raw->flags |= RAW3215_STOPPED;
}
 
/*
 * Enable writing to a 3215 tty
 */
static void tty3215_start(struct tty_struct *tty)
{
	raw3215_info *raw;
	unsigned long flags;
 
	raw = (raw3215_info *) tty->driver_data;
	if (raw->flags & RAW3215_STOPPED) {
		s390irq_spin_lock_irqsave(raw->irq, flags);
		raw->flags &= ~RAW3215_STOPPED;
		raw3215_try_io(raw);
		s390irq_spin_unlock_irqrestore(raw->irq, flags);
	}
}
 
 
/*
 * 3215 console initialization code called from console_init().
 * NOTE: This is called before kmalloc is available.
 */
void __init con3215_init(void)
{
	raw3215_info *raw;
	raw3215_req *req;
	int irq;
	int i;
 
	/* Check if 3215 is to be the console */
	if (!CONSOLE_IS_3215)
		return;
	irq = raw3215_find_dev(0);
 
	/* Set the console mode for VM */
	if (MACHINE_IS_VM) {
		cpcmd("TERM CONMODE 3215", NULL, 0);
		cpcmd("TERM AUTOCR OFF", NULL, 0);
	}
 
	/* allocate 3215 request structures */
	raw3215_freelist = NULL;
	spin_lock_init(&raw3215_freelist_lock);
	for (i = 0; i < NR_3215_REQ; i++) {
                req = (raw3215_req *) alloc_bootmem_low(sizeof(raw3215_req));
		req->next = raw3215_freelist;
		raw3215_freelist = req;
	}
 
	ctrlchar_init();
 
#ifdef CONFIG_TN3215_CONSOLE
        raw3215[0] = raw = (raw3215_info *)
                alloc_bootmem_low(sizeof(raw3215_info));
	memset(raw, 0, sizeof(raw3215_info));
        raw->buffer = (char *) alloc_bootmem_low(RAW3215_BUFFER_SIZE);
        raw->inbuf = (char *) alloc_bootmem_low(RAW3215_INBUF_SIZE);
 
	/* Find the first console */
	raw->irq = raw3215_find_dev(0);
	raw->flags |= RAW3215_FIXED;
	raw->tqueue.routine = raw3215_softint;
	raw->tqueue.data = raw;
        init_waitqueue_head(&raw->empty_wait);
 
	/* Request the console irq */
	if ( raw3215_startup(raw) != 0 )
		raw->irq = -1;
 
	if (raw->irq != -1) {
		register_console(&con3215);
	} else {
                free_bootmem((unsigned long) raw->inbuf, RAW3215_INBUF_SIZE);
                free_bootmem((unsigned long) raw->buffer, RAW3215_BUFFER_SIZE);
                free_bootmem((unsigned long) raw, sizeof(raw3215_info));
		raw3215[0] = NULL;
		printk("Couldn't find a 3215 console device\n");
	}
#endif
}
 
/*
 * 3215 tty registration code called from tty_init().
 * Most kernel services (incl. kmalloc) are available at this poimt.
 */
void __init tty3215_init(void)
{
	/* Don't bother registering the tty if we already skipped the console */
	if (!CONSOLE_IS_3215)
		return;
	/*
	 * Initialize the tty_driver structure
	 * Entries in tty3215_driver that are NOT initialized:
	 * proc_entry, set_termios, flush_buffer, set_ldisc, write_proc
	 */
 
	memset(&tty3215_driver, 0, sizeof(struct tty_driver));
	tty3215_driver.magic = TTY_DRIVER_MAGIC;
	tty3215_driver.driver_name = "tty3215";
	tty3215_driver.name = "ttyS";
	tty3215_driver.name_base = 0;
	tty3215_driver.major = TTY_MAJOR;
	tty3215_driver.minor_start = 64;
	tty3215_driver.num = NR_3215;
	tty3215_driver.type = TTY_DRIVER_TYPE_SYSTEM;
	tty3215_driver.subtype = SYSTEM_TYPE_TTY;
	tty3215_driver.init_termios = tty_std_termios;
	tty3215_driver.init_termios.c_iflag = IGNBRK | IGNPAR;
	tty3215_driver.init_termios.c_oflag = ONLCR | XTABS;
	tty3215_driver.init_termios.c_lflag = ISIG;
	tty3215_driver.flags = TTY_DRIVER_REAL_RAW; 
	tty3215_driver.refcount = &tty3215_refcount;
	tty3215_driver.table = tty3215_table;
	tty3215_driver.termios = tty3215_termios;
	tty3215_driver.termios_locked = tty3215_termios_locked;
 
	tty3215_driver.open = tty3215_open;
	tty3215_driver.close = tty3215_close;
	tty3215_driver.write = tty3215_write;
	tty3215_driver.put_char = tty3215_put_char;
	tty3215_driver.flush_chars = tty3215_flush_chars;
	tty3215_driver.write_room = tty3215_write_room;
	tty3215_driver.chars_in_buffer = tty3215_chars_in_buffer;
	tty3215_driver.flush_buffer = tty3215_flush_buffer;
	tty3215_driver.ioctl = tty3215_ioctl;
	tty3215_driver.throttle = tty3215_throttle;
	tty3215_driver.unthrottle = tty3215_unthrottle;
	tty3215_driver.send_xchar = NULL;
	tty3215_driver.set_termios = NULL;
	tty3215_driver.stop = tty3215_stop;
	tty3215_driver.start = tty3215_start;
	tty3215_driver.hangup = NULL;
	tty3215_driver.break_ctl = NULL;
	tty3215_driver.wait_until_sent = NULL;
	tty3215_driver.read_proc = NULL;
 
	if (tty_register_driver(&tty3215_driver))
		panic("Couldn't register tty3215 driver\n");
}