URL
https://opencores.org/ocsvn/or1k/or1k/trunk
Subversion Repositories or1k
[/] [or1k/] [trunk/] [linux/] [linux-2.4/] [drivers/] [scsi/] [53c700.h] - Rev 1275
Go to most recent revision | Compare with Previous | Blame | View Log
/* -*- mode: c; c-basic-offset: 8 -*- */ /* Driver for 53c700 and 53c700-66 chips from NCR and Symbios * * Copyright (C) 2001 by James.Bottomley@HansenPartnership.com */ #ifndef _53C700_H #define _53C700_H /* Turn on for general debugging---too verbose for normal use */ #undef NCR_700_DEBUG /* Debug the tag queues, checking hash queue allocation and deallocation * and search for duplicate tags */ #undef NCR_700_TAG_DEBUG #ifdef NCR_700_DEBUG #define DEBUG(x) printk x #else #define DEBUG(x) #endif /* The number of available command slots */ #define NCR_700_COMMAND_SLOTS_PER_HOST 64 /* The maximum number of Scatter Gathers we allow */ #define NCR_700_SG_SEGMENTS 32 /* The maximum number of luns (make this of the form 2^n) */ #define NCR_700_MAX_LUNS 32 #define NCR_700_LUN_MASK (NCR_700_MAX_LUNS - 1) /* Alter this with care: too many tags won't give the elevator a chance to * work; too few will cause the device to operate less efficiently */ #define NCR_700_MAX_TAGS 16 /* magic byte identifying an internally generated REQUEST_SENSE command */ #define NCR_700_INTERNAL_SENSE_MAGIC 0x42 /* WARNING: Leave this in for now: the dependency preprocessor doesn't * pick up file specific flags, so must define here if they are not * set */ #if !defined(CONFIG_53C700_IO_MAPPED) && !defined(CONFIG_53C700_MEM_MAPPED) #error "Config.in must define either CONFIG_53C700_IO_MAPPED or CONFIG_53C700_MEM_MAPPED to use this scsi core." #endif /* macros for consistent memory allocation */ #ifdef CONFIG_53C700_USE_CONSISTENT #define NCR_700_dma_cache_wback(mem, size) \ if(!hostdata->consistent) \ dma_cache_wback(mem, size) #define NCR_700_dma_cache_inv(mem, size) \ if(!hostdata->consistent) \ dma_cache_inv(mem, size) #define NCR_700_dma_cache_wback_inv(mem, size) \ if(!hostdata->consistent) \ dma_cache_wback_inv(mem, size) #else #define NCR_700_dma_cache_wback(mem, size) dma_cache_wback(mem,size) #define NCR_700_dma_cache_inv(mem, size) dma_cache_inv(mem,size) #define NCR_700_dma_cache_wback_inv(mem, size) dma_cache_wback_inv(mem,size) #endif struct NCR_700_Host_Parameters; /* These are the externally used routines */ struct Scsi_Host *NCR_700_detect(Scsi_Host_Template *, struct NCR_700_Host_Parameters *); int NCR_700_release(struct Scsi_Host *host); void NCR_700_intr(int, void *, struct pt_regs *); enum NCR_700_Host_State { NCR_700_HOST_BUSY, NCR_700_HOST_FREE, }; struct NCR_700_SG_List { /* The following is a script fragment to move the buffer onto the * bus and then link the next fragment or return */ #define SCRIPT_MOVE_DATA_IN 0x09000000 #define SCRIPT_MOVE_DATA_OUT 0x08000000 __u32 ins; __u32 pAddr; #define SCRIPT_NOP 0x80000000 #define SCRIPT_RETURN 0x90080000 }; /* We use device->hostdata to store negotiated parameters. This is * supposed to be a pointer to a device private area, but we cannot * really use it as such since it will never be freed, so just use the * 32 bits to cram the information. The SYNC negotiation sequence looks * like: * * If DEV_NEGOTIATED_SYNC not set, tack and SDTR message on to the * initial identify for the device and set DEV_BEGIN_SYNC_NEGOTATION * If we get an SDTR reply, work out the SXFER parameters, squirrel * them away here, clear DEV_BEGIN_SYNC_NEGOTIATION and set * DEV_NEGOTIATED_SYNC. If we get a REJECT msg, squirrel * * * 0:7 SXFER_REG negotiated value for this device * 8:15 Current queue depth * 16 negotiated SYNC flag * 17 begin SYNC negotiation flag * 18 device supports tag queueing */ #define NCR_700_DEV_NEGOTIATED_SYNC (1<<16) #define NCR_700_DEV_BEGIN_SYNC_NEGOTIATION (1<<17) #define NCR_700_DEV_BEGIN_TAG_QUEUEING (1<<18) #define NCR_700_DEV_TAG_STARVATION_WARNED (1<<19) static inline void NCR_700_set_SXFER(Scsi_Device *SDp, __u8 sxfer) { ((unsigned long)SDp->hostdata) &= 0xffffff00; ((unsigned long)SDp->hostdata) |= sxfer & 0xff; } static inline __u8 NCR_700_get_SXFER(Scsi_Device *SDp) { return (((unsigned long)SDp->hostdata) & 0xff); } static inline void NCR_700_set_depth(Scsi_Device *SDp, __u8 depth) { ((unsigned long)SDp->hostdata) &= 0xffff00ff; ((unsigned long)SDp->hostdata) |= (0xff00 & (depth << 8)); } static inline __u8 NCR_700_get_depth(Scsi_Device *SDp) { return ((((unsigned long)SDp->hostdata) & 0xff00)>>8); } static inline int NCR_700_is_flag_set(Scsi_Device *SDp, __u32 flag) { return (((unsigned long)SDp->hostdata) & flag) == flag; } static inline int NCR_700_is_flag_clear(Scsi_Device *SDp, __u32 flag) { return (((unsigned long)SDp->hostdata) & flag) == 0; } static inline void NCR_700_set_flag(Scsi_Device *SDp, __u32 flag) { ((unsigned long)SDp->hostdata) |= (flag & 0xffff0000); } static inline void NCR_700_clear_flag(Scsi_Device *SDp, __u32 flag) { ((unsigned long)SDp->hostdata) &= ~(flag & 0xffff0000); } /* These represent the Nexus hashing functions. A Nexus in SCSI terms * just means the identification of an outstanding command, by ITL * (Initiator Target Lun) or ITLQ (Initiator Target Lun Tag). I'm not * very keen on XOR based hashes, so these are based on number theory * instead. All you need to do is to fix your hash bucket size and * then choose reasonable strides which are coprime with the chosen * bucket size * * Note: this mathematical hash can be made very efficient, if the * compiler is good at optimising: Choose the number of buckets to be * 2^n and the modulo becomes a logical and with (2^n-1). * Additionally, if you chose the coprimes of the form 2^n-2^n the * multiplication can be done by a shift and an addition. */ #define MAX_ITL_HASH_BUCKETS 16 #define ITL_HASH_PRIME 7 #define MAX_ITLQ_HASH_BUCKETS 64 #define ITLQ_PUN_PRIME 7 #define ITLQ_LUN_PRIME 3 static inline int hash_ITL(__u8 pun, __u8 lun) { return (pun*ITL_HASH_PRIME + lun) % MAX_ITL_HASH_BUCKETS; } static inline int hash_ITLQ(__u8 pun, __u8 lun, __u8 tag) { return (pun*ITLQ_PUN_PRIME + lun*ITLQ_LUN_PRIME + tag) % MAX_ITLQ_HASH_BUCKETS; } struct NCR_700_command_slot { struct NCR_700_SG_List SG[NCR_700_SG_SEGMENTS+1]; struct NCR_700_SG_List *pSG; #define NCR_700_SLOT_MASK 0xFC #define NCR_700_SLOT_MAGIC 0xb8 #define NCR_700_SLOT_FREE (0|NCR_700_SLOT_MAGIC) /* slot may be used */ #define NCR_700_SLOT_BUSY (1|NCR_700_SLOT_MAGIC) /* slot has command active on HA */ #define NCR_700_SLOT_QUEUED (2|NCR_700_SLOT_MAGIC) /* slot has command to be made active on HA */ __u8 state; #define NCR_700_NO_TAG 0xdead __u16 tag; __u32 resume_offset; Scsi_Cmnd *cmnd; /* The pci_mapped address of the actual command in cmnd */ dma_addr_t pCmd; __u32 temp; /* if this command is a pci_single mapping, holds the dma address * for later unmapping in the done routine */ dma_addr_t dma_handle; /* Doubly linked ITL/ITLQ list kept in strict time order * (latest at the back) */ struct NCR_700_command_slot *ITL_forw; struct NCR_700_command_slot *ITL_back; struct NCR_700_command_slot *ITLQ_forw; struct NCR_700_command_slot *ITLQ_back; }; struct NCR_700_Host_Parameters { /* These must be filled in by the calling driver */ int clock; /* board clock speed in MHz */ unsigned long base; /* the base for the port (copied to host) */ struct pci_dev *pci_dev; __u32 dmode_extra; /* adjustable bus settings */ __u32 differential:1; /* if we are differential */ #ifdef CONFIG_53C700_LE_ON_BE /* This option is for HP only. Set it if your chip is wired for * little endian on this platform (which is big endian) */ __u32 force_le_on_be:1; #endif __u32 chip710:1; /* set if really a 710 not 700 */ __u32 burst_disable:1; /* set to 1 to disable 710 bursting */ /* NOTHING BELOW HERE NEEDS ALTERING */ __u32 fast:1; /* if we can alter the SCSI bus clock speed (so can negiotiate sync) */ #ifdef CONFIG_53C700_USE_CONSISTENT __u32 consistent:1; #endif int sync_clock; /* The speed of the SYNC core */ __u32 *script; /* pointer to script location */ __u32 pScript; /* physical mem addr of script */ /* This will be the host lock. Unfortunately, we can't use it * at the moment because of the necessity of holding the * io_request_lock */ spinlock_t lock; enum NCR_700_Host_State state; /* protected by state lock */ Scsi_Cmnd *cmd; /* Note: pScript contains the single consistent block of * memory. All the msgin, msgout and status are allocated in * this memory too (at separate cache lines). TOTAL_MEM_SIZE * represents the total size of this area */ #define MSG_ARRAY_SIZE 8 #define MSGOUT_OFFSET (L1_CACHE_ALIGN(sizeof(SCRIPT))) __u8 *msgout; #define MSGIN_OFFSET (MSGOUT_OFFSET + L1_CACHE_ALIGN(MSG_ARRAY_SIZE)) __u8 *msgin; #define STATUS_OFFSET (MSGIN_OFFSET + L1_CACHE_ALIGN(MSG_ARRAY_SIZE)) __u8 *status; #define SLOTS_OFFSET (STATUS_OFFSET + L1_CACHE_ALIGN(MSG_ARRAY_SIZE)) struct NCR_700_command_slot *slots; #define TOTAL_MEM_SIZE (SLOTS_OFFSET + L1_CACHE_ALIGN(sizeof(struct NCR_700_command_slot) * NCR_700_COMMAND_SLOTS_PER_HOST)) int saved_slot_position; int command_slot_count; /* protected by state lock */ __u8 tag_negotiated; __u8 rev; __u8 reselection_id; /* flags for the host */ /* ITL list. ALL outstanding commands are hashed here in strict * order, latest at the back */ struct NCR_700_command_slot *ITL_Hash_forw[MAX_ITL_HASH_BUCKETS]; struct NCR_700_command_slot *ITL_Hash_back[MAX_ITL_HASH_BUCKETS]; /* Only tagged outstanding commands are hashed here (also latest * at the back) */ struct NCR_700_command_slot *ITLQ_Hash_forw[MAX_ITLQ_HASH_BUCKETS]; struct NCR_700_command_slot *ITLQ_Hash_back[MAX_ITLQ_HASH_BUCKETS]; /* Free list, singly linked by ITL_forw elements */ struct NCR_700_command_slot *free_list; }; /* * 53C700 Register Interface - the offset from the Selected base * I/O address */ #ifdef CONFIG_53C700_LE_ON_BE #define bE (hostdata->force_le_on_be ? 0 : 3) #define bSWAP (hostdata->force_le_on_be) #elif defined(__BIG_ENDIAN) #define bE 3 #define bSWAP 0 #elif defined(__LITTLE_ENDIAN) #define bE 0 #define bSWAP 0 #else #error "__BIG_ENDIAN or __LITTLE_ENDIAN must be defined, did you include byteorder.h?" #endif #define bS_to_cpu(x) (bSWAP ? le32_to_cpu(x) : (x)) #define bS_to_host(x) (bSWAP ? cpu_to_le32(x) : (x)) /* NOTE: These registers are in the LE register space only, the required byte * swapping is done by the NCR_700_{read|write}[b] functions */ #define SCNTL0_REG 0x00 #define FULL_ARBITRATION 0xc0 #define PARITY 0x08 #define ENABLE_PARITY 0x04 #define AUTO_ATN 0x02 #define SCNTL1_REG 0x01 #define SLOW_BUS 0x80 #define ENABLE_SELECT 0x20 #define ASSERT_RST 0x08 #define ASSERT_EVEN_PARITY 0x04 #define SDID_REG 0x02 #define SIEN_REG 0x03 #define PHASE_MM_INT 0x80 #define FUNC_COMP_INT 0x40 #define SEL_TIMEOUT_INT 0x20 #define SELECT_INT 0x10 #define GROSS_ERR_INT 0x08 #define UX_DISC_INT 0x04 #define RST_INT 0x02 #define PAR_ERR_INT 0x01 #define SCID_REG 0x04 #define SXFER_REG 0x05 #define ASYNC_OPERATION 0x00 #define SODL_REG 0x06 #define SOCL_REG 0x07 #define SFBR_REG 0x08 #define SIDL_REG 0x09 #define SBDL_REG 0x0A #define SBCL_REG 0x0B /* read bits */ #define SBCL_IO 0x01 /*write bits */ #define SYNC_DIV_AS_ASYNC 0x00 #define SYNC_DIV_1_0 0x01 #define SYNC_DIV_1_5 0x02 #define SYNC_DIV_2_0 0x03 #define DSTAT_REG 0x0C #define ILGL_INST_DETECTED 0x01 #define WATCH_DOG_INTERRUPT 0x02 #define SCRIPT_INT_RECEIVED 0x04 #define ABORTED 0x10 #define SSTAT0_REG 0x0D #define PARITY_ERROR 0x01 #define SCSI_RESET_DETECTED 0x02 #define UNEXPECTED_DISCONNECT 0x04 #define SCSI_GROSS_ERROR 0x08 #define SELECTED 0x10 #define SELECTION_TIMEOUT 0x20 #define FUNCTION_COMPLETE 0x40 #define PHASE_MISMATCH 0x80 #define SSTAT1_REG 0x0E #define SIDL_REG_FULL 0x80 #define SODR_REG_FULL 0x40 #define SODL_REG_FULL 0x20 #define SSTAT2_REG 0x0F #define CTEST0_REG 0x14 #define BTB_TIMER_DISABLE 0x40 #define CTEST1_REG 0x15 #define CTEST2_REG 0x16 #define CTEST3_REG 0x17 #define CTEST4_REG 0x18 #define DISABLE_FIFO 0x00 #define SLBE 0x10 #define SFWR 0x08 #define BYTE_LANE0 0x04 #define BYTE_LANE1 0x05 #define BYTE_LANE2 0x06 #define BYTE_LANE3 0x07 #define SCSI_ZMODE 0x20 #define ZMODE 0x40 #define CTEST5_REG 0x19 #define MASTER_CONTROL 0x10 #define DMA_DIRECTION 0x08 #define CTEST7_REG 0x1B #define BURST_DISABLE 0x80 /* 710 only */ #define SEL_TIMEOUT_DISABLE 0x10 /* 710 only */ #define DFP 0x08 #define EVP 0x04 #define DIFF 0x01 #define CTEST6_REG 0x1A #define TEMP_REG 0x1C #define DFIFO_REG 0x20 #define FLUSH_DMA_FIFO 0x80 #define CLR_FIFO 0x40 #define ISTAT_REG 0x21 #define ABORT_OPERATION 0x80 #define SOFTWARE_RESET_710 0x40 #define DMA_INT_PENDING 0x01 #define SCSI_INT_PENDING 0x02 #define CONNECTED 0x08 #define CTEST8_REG 0x22 #define LAST_DIS_ENBL 0x01 #define SHORTEN_FILTERING 0x04 #define ENABLE_ACTIVE_NEGATION 0x10 #define GENERATE_RECEIVE_PARITY 0x20 #define CLR_FIFO_710 0x04 #define FLUSH_DMA_FIFO_710 0x08 #define CTEST9_REG 0x23 #define DBC_REG 0x24 #define DCMD_REG 0x27 #define DNAD_REG 0x28 #define DIEN_REG 0x39 #define BUS_FAULT 0x20 #define ABORT_INT 0x10 #define INT_INST_INT 0x04 #define WD_INT 0x02 #define ILGL_INST_INT 0x01 #define DCNTL_REG 0x3B #define SOFTWARE_RESET 0x01 #define COMPAT_700_MODE 0x01 #define SCRPTS_16BITS 0x20 #define ASYNC_DIV_2_0 0x00 #define ASYNC_DIV_1_5 0x40 #define ASYNC_DIV_1_0 0x80 #define ASYNC_DIV_3_0 0xc0 #define DMODE_710_REG 0x38 #define DMODE_700_REG 0x34 #define BURST_LENGTH_1 0x00 #define BURST_LENGTH_2 0x40 #define BURST_LENGTH_4 0x80 #define BURST_LENGTH_8 0xC0 #define DMODE_FC1 0x10 #define DMODE_FC2 0x20 #define BW16 32 #define MODE_286 16 #define IO_XFER 8 #define FIXED_ADDR 4 #define DSP_REG 0x2C #define DSPS_REG 0x30 /* Parameters to begin SDTR negotiations. Empirically, I find that * the 53c700-66 cannot handle an offset >8, so don't change this */ #define NCR_700_MAX_OFFSET 8 /* Was hoping the max offset would be greater for the 710, but * empirically it seems to be 8 also */ #define NCR_710_MAX_OFFSET 8 #define NCR_700_MIN_XFERP 1 #define NCR_710_MIN_XFERP 0 #define NCR_700_MIN_PERIOD 25 /* for SDTR message, 100ns */ #define script_patch_32(script, symbol, value) \ { \ int i; \ for(i=0; i< (sizeof(A_##symbol##_used) / sizeof(__u32)); i++) { \ __u32 val = bS_to_cpu((script)[A_##symbol##_used[i]]) + value; \ (script)[A_##symbol##_used[i]] = bS_to_host(val); \ dma_cache_wback((unsigned long)&(script)[A_##symbol##_used[i]], 4); \ DEBUG((" script, patching %s at %d to 0x%lx\n", \ #symbol, A_##symbol##_used[i], (value))); \ } \ } #define script_patch_32_abs(script, symbol, value) \ { \ int i; \ for(i=0; i< (sizeof(A_##symbol##_used) / sizeof(__u32)); i++) { \ (script)[A_##symbol##_used[i]] = bS_to_host(value); \ dma_cache_wback((unsigned long)&(script)[A_##symbol##_used[i]], 4); \ DEBUG((" script, patching %s at %d to 0x%lx\n", \ #symbol, A_##symbol##_used[i], (value))); \ } \ } /* Used for patching the SCSI ID in the SELECT instruction */ #define script_patch_ID(script, symbol, value) \ { \ int i; \ for(i=0; i< (sizeof(A_##symbol##_used) / sizeof(__u32)); i++) { \ __u32 val = bS_to_cpu((script)[A_##symbol##_used[i]]); \ val &= 0xff00ffff; \ val |= ((value) & 0xff) << 16; \ (script)[A_##symbol##_used[i]] = bS_to_host(val); \ dma_cache_wback((unsigned long)&(script)[A_##symbol##_used[i]], 4); \ DEBUG((" script, patching ID field %s at %d to 0x%x\n", \ #symbol, A_##symbol##_used[i], val)); \ } \ } #define script_patch_16(script, symbol, value) \ { \ int i; \ for(i=0; i< (sizeof(A_##symbol##_used) / sizeof(__u32)); i++) { \ __u32 val = bS_to_cpu((script)[A_##symbol##_used[i]]); \ val &= 0xffff0000; \ val |= ((value) & 0xffff); \ (script)[A_##symbol##_used[i]] = bS_to_host(val); \ dma_cache_wback((unsigned long)&(script)[A_##symbol##_used[i]], 4); \ DEBUG((" script, patching short field %s at %d to 0x%x\n", \ #symbol, A_##symbol##_used[i], val)); \ } \ } #endif #ifdef CONFIG_53C700_MEM_MAPPED static inline __u8 NCR_700_readb(struct Scsi_Host *host, __u32 reg) { const struct NCR_700_Host_Parameters *hostdata __attribute__((unused)) = (struct NCR_700_Host_Parameters *)host->hostdata[0]; return readb(host->base + (reg^bE)); } static inline __u32 NCR_700_readl(struct Scsi_Host *host, __u32 reg) { __u32 value = __raw_readl(host->base + reg); const struct NCR_700_Host_Parameters *hostdata __attribute__((unused)) = (struct NCR_700_Host_Parameters *)host->hostdata[0]; #if 1 /* sanity check the register */ if((reg & 0x3) != 0) BUG(); #endif return bS_to_cpu(value); } static inline void NCR_700_writeb(__u8 value, struct Scsi_Host *host, __u32 reg) { const struct NCR_700_Host_Parameters *hostdata __attribute__((unused)) = (struct NCR_700_Host_Parameters *)host->hostdata[0]; writeb(value, host->base + (reg^bE)); } static inline void NCR_700_writel(__u32 value, struct Scsi_Host *host, __u32 reg) { const struct NCR_700_Host_Parameters *hostdata __attribute__((unused)) = (struct NCR_700_Host_Parameters *)host->hostdata[0]; #if 1 /* sanity check the register */ if((reg & 0x3) != 0) BUG(); #endif __raw_writel(bS_to_host(value), host->base + reg); } #elif defined(CONFIG_53C700_IO_MAPPED) static inline __u8 NCR_700_readb(struct Scsi_Host *host, __u32 reg) { const struct NCR_700_Host_Parameters *hostdata __attribute__((unused)) = (struct NCR_700_Host_Parameters *)host->hostdata[0]; return inb(host->base + (reg^bE)); } static inline __u32 NCR_700_readl(struct Scsi_Host *host, __u32 reg) { __u32 value = inl(host->base + reg); const struct NCR_700_Host_Parameters *hostdata __attribute__((unused)) = (struct NCR_700_Host_Parameters *)host->hostdata[0]; #if 1 /* sanity check the register */ if((reg & 0x3) != 0) BUG(); #endif return bS_to_cpu(value); } static inline void NCR_700_writeb(__u8 value, struct Scsi_Host *host, __u32 reg) { const struct NCR_700_Host_Parameters *hostdata __attribute__((unused)) = (struct NCR_700_Host_Parameters *)host->hostdata[0]; outb(value, host->base + (reg^bE)); } static inline void NCR_700_writel(__u32 value, struct Scsi_Host *host, __u32 reg) { const struct NCR_700_Host_Parameters *hostdata __attribute__((unused)) = (struct NCR_700_Host_Parameters *)host->hostdata[0]; #if 1 /* sanity check the register */ if((reg & 0x3) != 0) BUG(); #endif outl(bS_to_host(value), host->base + reg); } #endif
Go to most recent revision | Compare with Previous | Blame | View Log