OpenCores
URL https://opencores.org/ocsvn/or1k/or1k/trunk

Subversion Repositories or1k

[/] [or1k/] [trunk/] [linux/] [linux-2.4/] [drivers/] [scsi/] [pcmcia/] [nsp_message.c] - Rev 1765

Compare with Previous | Blame | View Log

/*==========================================================================
  NinjaSCSI-3 message handler
      By: YOKOTA Hiroshi <yokota@netlab.is.tsukuba.ac.jp>
 
   This software may be used and distributed according to the terms of
   the GNU General Public License.
 */
 
/* $Id: nsp_message.c,v 1.1.1.1 2004-04-15 02:15:11 phoenix Exp $ */
 
static void nsp_message_in(Scsi_Cmnd *SCpnt)
{
	unsigned int  base = SCpnt->device->host->io_port;
	nsp_hw_data  *data = (nsp_hw_data *)SCpnt->device->host->hostdata;
	unsigned char data_reg, control_reg;
	int           ret, len;
 
	/*
	 * XXX: NSP QUIRK
	 * NSP invoke interrupts only in the case of scsi phase changes,
	 * therefore we should poll the scsi phase here to catch 
	 * the next "msg in" if exists (no scsi phase changes).
	 */
	ret = 16;
	len = 0;
 
	nsp_dbg(NSP_DEBUG_MSGINOCCUR, "msgin loop");
	do {
		/* read data */
		data_reg = nsp_index_read(base, SCSIDATAIN);
 
		/* assert ACK */
		control_reg = nsp_index_read(base, SCSIBUSCTRL);
		control_reg |= SCSI_ACK;
		nsp_index_write(base, SCSIBUSCTRL, control_reg);
		nsp_negate_signal(SCpnt, BUSMON_REQ, "msgin<REQ>");
 
		data->MsgBuffer[len] = data_reg; len++;
 
		/* deassert ACK */
		control_reg =  nsp_index_read(base, SCSIBUSCTRL);
		control_reg &= ~SCSI_ACK;
		nsp_index_write(base, SCSIBUSCTRL, control_reg);
 
		/* catch a next signal */
		ret = nsp_expect_signal(SCpnt, BUSPHASE_MESSAGE_IN, BUSMON_REQ);
	} while (ret > 0 && MSGBUF_SIZE > len);
 
	data->MsgLen = len;
 
}
 
static void nsp_message_out(Scsi_Cmnd *SCpnt)
{
	nsp_hw_data *data = (nsp_hw_data *)SCpnt->device->host->hostdata;
	int ret = 1;
	int len = data->MsgLen;
 
	/*
	 * XXX: NSP QUIRK
	 * NSP invoke interrupts only in the case of scsi phase changes,
	 * therefore we should poll the scsi phase here to catch 
	 * the next "msg out" if exists (no scsi phase changes).
	 */
 
	nsp_dbg(NSP_DEBUG_MSGOUTOCCUR, "msgout loop");
	do {
		if (nsp_xfer(SCpnt, BUSPHASE_MESSAGE_OUT)) {
			nsp_msg(KERN_DEBUG, "msgout: xfer short");
		}
 
		/* catch a next signal */
		ret = nsp_expect_signal(SCpnt, BUSPHASE_MESSAGE_OUT, BUSMON_REQ);
	} while (ret > 0 && len-- > 0);
 
}
 
/* end */
 

Compare with Previous | Blame | View Log

powered by: WebSVN 2.1.0

© copyright 1999-2024 OpenCores.org, equivalent to Oliscience, all rights reserved. OpenCores®, registered trademark.