URL
https://opencores.org/ocsvn/or1k/or1k/trunk
Subversion Repositories or1k
[/] [or1k/] [trunk/] [linux/] [linux-2.4/] [drivers/] [scsi/] [psi240i.c] - Rev 1774
Go to most recent revision | Compare with Previous | Blame | View Log
/*+M************************************************************************* * Perceptive Solutions, Inc. PSI-240I device driver proc support for Linux. * * Copyright (c) 1997 Perceptive Solutions, Inc. * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by * the Free Software Foundation; either version 2, or (at your option) * any later version. * * This program is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * * You should have received a copy of the GNU General Public License * along with this program; see the file COPYING. If not, write to * the Free Software Foundation, 675 Mass Ave, Cambridge, MA 02139, USA. * * * File Name: psi240i.c * * Description: SCSI driver for the PSI240I EIDE interface card. * *-M*************************************************************************/ #include <linux/module.h> #include <linux/kernel.h> #include <linux/types.h> #include <linux/string.h> #include <linux/ioport.h> #include <linux/delay.h> #include <linux/sched.h> #include <linux/proc_fs.h> #include <linux/spinlock.h> #include <asm/dma.h> #include <asm/system.h> #include <asm/io.h> #include <linux/blk.h> #include "scsi.h" #include "hosts.h" #include "psi240i.h" #include "psi_chip.h" #include<linux/stat.h> //#define DEBUG 1 #ifdef DEBUG #define DEB(x) x #else #define DEB(x) #endif #define MAXBOARDS 2 /* Increase this and the sizes of the arrays below, if you need more. */ #define PORT_DATA 0 #define PORT_ERROR 1 #define PORT_SECTOR_COUNT 2 #define PORT_LBA_0 3 #define PORT_LBA_8 4 #define PORT_LBA_16 5 #define PORT_LBA_24 6 #define PORT_STAT_CMD 7 #define PORT_SEL_FAIL 8 #define PORT_IRQ_STATUS 9 #define PORT_ADDRESS 10 #define PORT_FAIL 11 #define PORT_ALT_STAT 12 typedef struct { UCHAR device; // device code UCHAR byte6; // device select register image UCHAR spigot; // spigot number UCHAR expectingIRQ; // flag for expecting and interrupt USHORT sectors; // number of sectors per track USHORT heads; // number of heads USHORT cylinders; // number of cylinders for this device USHORT spareword; // placeholder ULONG blocks; // number of blocks on device } OUR_DEVICE, *POUR_DEVICE; typedef struct { USHORT ports[13]; OUR_DEVICE device[8]; Scsi_Cmnd *pSCmnd; IDE_STRUCT ide; ULONG startSector; USHORT sectorCount; Scsi_Cmnd *SCpnt; VOID *buffer; USHORT expectingIRQ; } ADAPTER240I, *PADAPTER240I; #define HOSTDATA(host) ((PADAPTER240I)&host->hostdata) static struct Scsi_Host *PsiHost[6] = {NULL,}; /* One for each IRQ level (10-15) */ static IDENTIFY_DATA identifyData; static SETUP ChipSetup; static USHORT portAddr[6] = {CHIP_ADRS_0, CHIP_ADRS_1, CHIP_ADRS_2, CHIP_ADRS_3, CHIP_ADRS_4, CHIP_ADRS_5}; /**************************************************************** * Name: WriteData :LOCAL * * Description: Write data to device. * * Parameters: padapter - Pointer adapter data structure. * * Returns: TRUE if drive does not assert DRQ in time. * ****************************************************************/ static int WriteData (PADAPTER240I padapter) { ULONG timer; USHORT *pports = padapter->ports; timer = jiffies + TIMEOUT_DRQ; // calculate the timeout value do { if ( inb_p (pports[PORT_STAT_CMD]) & IDE_STATUS_DRQ ) { outsw (pports[PORT_DATA], padapter->buffer, (USHORT)padapter->ide.ide.ide[2] * 256); return 0; } } while ( time_after(timer, jiffies) ); // test for timeout padapter->ide.ide.ides.cmd = 0; // null out the command byte return 1; } /**************************************************************** * Name: IdeCmd :LOCAL * * Description: Process a queued command from the SCSI manager. * * Parameters: padapter - Pointer adapter data structure. * * Returns: Zero if no error or status register contents on error. * ****************************************************************/ static UCHAR IdeCmd (PADAPTER240I padapter) { ULONG timer; USHORT *pports = padapter->ports; UCHAR status; outb_p (padapter->ide.ide.ides.spigot, pports[PORT_SEL_FAIL]); // select the spigot outb_p (padapter->ide.ide.ide[6], pports[PORT_LBA_24]); // select the drive timer = jiffies + TIMEOUT_READY; // calculate the timeout value do { status = inb_p (padapter->ports[PORT_STAT_CMD]); if ( status & IDE_STATUS_DRDY ) { outb_p (padapter->ide.ide.ide[2], pports[PORT_SECTOR_COUNT]); outb_p (padapter->ide.ide.ide[3], pports[PORT_LBA_0]); outb_p (padapter->ide.ide.ide[4], pports[PORT_LBA_8]); outb_p (padapter->ide.ide.ide[5], pports[PORT_LBA_16]); padapter->expectingIRQ = 1; outb_p (padapter->ide.ide.ide[7], pports[PORT_STAT_CMD]); if ( padapter->ide.ide.ides.cmd == IDE_CMD_WRITE_MULTIPLE ) return (WriteData (padapter)); return 0; } } while ( time_after(timer, jiffies) ); // test for timeout padapter->ide.ide.ides.cmd = 0; // null out the command byte return status; } /**************************************************************** * Name: SetupTransfer :LOCAL * * Description: Setup a data transfer command. * * Parameters: padapter - Pointer adapter data structure. * drive - Drive/head register upper nibble only. * * Returns: TRUE if no data to transfer. * ****************************************************************/ static int SetupTransfer (PADAPTER240I padapter, UCHAR drive) { if ( padapter->sectorCount ) { *(ULONG *)padapter->ide.ide.ides.lba = padapter->startSector; padapter->ide.ide.ide[6] |= drive; padapter->ide.ide.ides.sectors = ( padapter->sectorCount > SECTORSXFER ) ? SECTORSXFER : padapter->sectorCount; padapter->sectorCount -= padapter->ide.ide.ides.sectors; // bump the start and count for next xfer padapter->startSector += padapter->ide.ide.ides.sectors; return 0; } else { padapter->ide.ide.ides.cmd = 0; // null out the command byte padapter->SCpnt = NULL; return 1; } } /**************************************************************** * Name: DecodeError :LOCAL * * Description: Decode and process device errors. * * Parameters: pshost - Pointer to host data block. * status - Status register code. * * Returns: The driver status code. * ****************************************************************/ static ULONG DecodeError (struct Scsi_Host *pshost, UCHAR status) { PADAPTER240I padapter = HOSTDATA(pshost); UCHAR error; padapter->expectingIRQ = 0; padapter->SCpnt = NULL; if ( status & IDE_STATUS_WRITE_FAULT ) { return DID_PARITY << 16; } if ( status & IDE_STATUS_BUSY ) return DID_BUS_BUSY << 16; error = inb_p (padapter->ports[PORT_ERROR]); DEB(printk ("\npsi240i error register: %x", error)); switch ( error ) { case IDE_ERROR_AMNF: case IDE_ERROR_TKONF: case IDE_ERROR_ABRT: case IDE_ERROR_IDFN: case IDE_ERROR_UNC: case IDE_ERROR_BBK: default: return DID_ERROR << 16; } return DID_ERROR << 16; } /**************************************************************** * Name: Irq_Handler :LOCAL * * Description: Interrupt handler. * * Parameters: irq - Hardware IRQ number. * dev_id - * regs - * * Returns: TRUE if drive is not ready in time. * ****************************************************************/ static void Irq_Handler (int irq, void *dev_id, struct pt_regs *regs) { struct Scsi_Host *shost; // Pointer to host data block PADAPTER240I padapter; // Pointer to adapter control structure USHORT *pports; // I/O port array Scsi_Cmnd *SCpnt; UCHAR status; int z; DEB(printk ("\npsi240i received interrupt\n")); shost = PsiHost[irq - 10]; if ( !shost ) panic ("Splunge!"); padapter = HOSTDATA(shost); pports = padapter->ports; SCpnt = padapter->SCpnt; if ( !padapter->expectingIRQ ) { DEB(printk ("\npsi240i Unsolicited interrupt\n")); return; } padapter->expectingIRQ = 0; status = inb_p (padapter->ports[PORT_STAT_CMD]); // read the device status if ( status & (IDE_STATUS_ERROR | IDE_STATUS_WRITE_FAULT) ) goto irqerror; DEB(printk ("\npsi240i processing interrupt")); switch ( padapter->ide.ide.ides.cmd ) // decide how to handle the interrupt { case IDE_CMD_READ_MULTIPLE: if ( status & IDE_STATUS_DRQ ) { insw (pports[PORT_DATA], padapter->buffer, (USHORT)padapter->ide.ide.ides.sectors * 256); padapter->buffer += padapter->ide.ide.ides.sectors * 512; if ( SetupTransfer (padapter, padapter->ide.ide.ide[6] & 0xF0) ) { SCpnt->result = DID_OK << 16; padapter->SCpnt = NULL; SCpnt->scsi_done (SCpnt); return; } if ( !(status = IdeCmd (padapter)) ) return; } break; case IDE_CMD_WRITE_MULTIPLE: padapter->buffer += padapter->ide.ide.ides.sectors * 512; if ( SetupTransfer (padapter, padapter->ide.ide.ide[6] & 0xF0) ) { SCpnt->result = DID_OK << 16; padapter->SCpnt = NULL; SCpnt->scsi_done (SCpnt); return; } if ( !(status = IdeCmd (padapter)) ) return; break; case IDE_COMMAND_IDENTIFY: { PINQUIRYDATA pinquiryData = SCpnt->request_buffer; if ( status & IDE_STATUS_DRQ ) { insw (pports[PORT_DATA], &identifyData, sizeof (identifyData) >> 1); memset (pinquiryData, 0, SCpnt->request_bufflen); // Zero INQUIRY data structure. pinquiryData->DeviceType = 0; pinquiryData->Versions = 2; pinquiryData->AdditionalLength = 35 - 4; // Fill in vendor identification fields. for ( z = 0; z < 20; z += 2 ) { pinquiryData->VendorId[z] = ((UCHAR *)identifyData.ModelNumber)[z + 1]; pinquiryData->VendorId[z + 1] = ((UCHAR *)identifyData.ModelNumber)[z]; } // Initialize unused portion of product id. for ( z = 0; z < 4; z++ ) pinquiryData->ProductId[12 + z] = ' '; // Move firmware revision from IDENTIFY data to // product revision in INQUIRY data. for ( z = 0; z < 4; z += 2 ) { pinquiryData->ProductRevisionLevel[z] = ((UCHAR *)identifyData.FirmwareRevision)[z + 1]; pinquiryData->ProductRevisionLevel[z + 1] = ((UCHAR *)identifyData.FirmwareRevision)[z]; } SCpnt->result = DID_OK << 16; padapter->SCpnt = NULL; SCpnt->scsi_done (SCpnt); return; } break; } default: SCpnt->result = DID_OK << 16; padapter->SCpnt = NULL; SCpnt->scsi_done (SCpnt); return; } irqerror:; DEB(printk ("\npsi240i error Device Status: %X\n", status)); SCpnt->result = DecodeError (shost, status); SCpnt->scsi_done (SCpnt); } static void do_Irq_Handler (int irq, void *dev_id, struct pt_regs *regs) { unsigned long flags; spin_lock_irqsave(&io_request_lock, flags); Irq_Handler(irq, dev_id, regs); spin_unlock_irqrestore(&io_request_lock, flags); } /**************************************************************** * Name: Psi240i_QueueCommand * * Description: Process a queued command from the SCSI manager. * * Parameters: SCpnt - Pointer to SCSI command structure. * done - Pointer to done function to call. * * Returns: Status code. * ****************************************************************/ int Psi240i_QueueCommand (Scsi_Cmnd *SCpnt, void (*done)(Scsi_Cmnd *)) { UCHAR *cdb = (UCHAR *)SCpnt->cmnd; // Pointer to SCSI CDB PADAPTER240I padapter = HOSTDATA(SCpnt->host); // Pointer to adapter control structure POUR_DEVICE pdev = &padapter->device[SCpnt->target];// Pointer to device information UCHAR rc; // command return code SCpnt->scsi_done = done; padapter->ide.ide.ides.spigot = pdev->spigot; padapter->buffer = SCpnt->request_buffer; if (done) { if ( !pdev->device ) { SCpnt->result = DID_BAD_TARGET << 16; done (SCpnt); return 0; } } else { printk("psi240i_queuecommand: %02X: done can't be NULL\n", *cdb); return 0; } switch ( *cdb ) { case SCSIOP_INQUIRY: // inquiry CDB { padapter->ide.ide.ide[6] = pdev->byte6; padapter->ide.ide.ides.cmd = IDE_COMMAND_IDENTIFY; break; } case SCSIOP_TEST_UNIT_READY: // test unit ready CDB SCpnt->result = DID_OK << 16; done (SCpnt); return 0; case SCSIOP_READ_CAPACITY: // read capctiy CDB { PREAD_CAPACITY_DATA pdata = (PREAD_CAPACITY_DATA)SCpnt->request_buffer; pdata->blksiz = 0x20000; XANY2SCSI ((UCHAR *)&pdata->blks, pdev->blocks); SCpnt->result = DID_OK << 16; done (SCpnt); return 0; } case SCSIOP_VERIFY: // verify CDB *(ULONG *)padapter->ide.ide.ides.lba = XSCSI2LONG (&cdb[2]); padapter->ide.ide.ide[6] |= pdev->byte6; padapter->ide.ide.ide[2] = (UCHAR)((USHORT)cdb[8] | ((USHORT)cdb[7] << 8)); padapter->ide.ide.ides.cmd = IDE_COMMAND_VERIFY; break; case SCSIOP_READ: // read10 CDB padapter->startSector = XSCSI2LONG (&cdb[2]); padapter->sectorCount = (USHORT)cdb[8] | ((USHORT)cdb[7] << 8); SetupTransfer (padapter, pdev->byte6); padapter->ide.ide.ides.cmd = IDE_CMD_READ_MULTIPLE; break; case SCSIOP_READ6: // read6 CDB padapter->startSector = SCSI2LONG (&cdb[1]); padapter->sectorCount = cdb[4]; SetupTransfer (padapter, pdev->byte6); padapter->ide.ide.ides.cmd = IDE_CMD_READ_MULTIPLE; break; case SCSIOP_WRITE: // write10 CDB padapter->startSector = XSCSI2LONG (&cdb[2]); padapter->sectorCount = (USHORT)cdb[8] | ((USHORT)cdb[7] << 8); SetupTransfer (padapter, pdev->byte6); padapter->ide.ide.ides.cmd = IDE_CMD_WRITE_MULTIPLE; break; case SCSIOP_WRITE6: // write6 CDB padapter->startSector = SCSI2LONG (&cdb[1]); padapter->sectorCount = cdb[4]; SetupTransfer (padapter, pdev->byte6); padapter->ide.ide.ides.cmd = IDE_CMD_WRITE_MULTIPLE; break; default: DEB (printk ("psi240i_queuecommand: Unsupported command %02X\n", *cdb)); SCpnt->result = DID_ERROR << 16; done (SCpnt); return 0; } padapter->SCpnt = SCpnt; // Save this command data rc = IdeCmd (padapter); if ( rc ) { padapter->expectingIRQ = 0; DEB (printk ("psi240i_queuecommand: %02X, %02X: Device failed to respond for command\n", *cdb, padapter->ide.ide.ides.cmd)); SCpnt->result = DID_ERROR << 16; done (SCpnt); return 0; } DEB (printk("psi240i_queuecommand: %02X, %02X now waiting for interrupt ", *cdb, padapter->ide.ide.ides.cmd)); return 0; } static void internal_done(Scsi_Cmnd * SCpnt) { SCpnt->SCp.Status++; } /**************************************************************** * Name: Psi240i_Command * * Description: Process a command from the SCSI manager. * * Parameters: SCpnt - Pointer to SCSI command structure. * * Returns: Status code. * ****************************************************************/ int Psi240i_Command (Scsi_Cmnd *SCpnt) { DEB(printk("psi240i_command: ..calling psi240i_queuecommand\n")); Psi240i_QueueCommand (SCpnt, internal_done); SCpnt->SCp.Status = 0; while (!SCpnt->SCp.Status) barrier (); return SCpnt->result; } /*************************************************************************** * Name: ReadChipMemory * * Description: Read information from controller memory. * * Parameters: psetup - Pointer to memory image of setup information. * base - base address of memory. * length - lenght of data space in bytes. * port - I/O address of data port. * * Returns: Nothing. * **************************************************************************/ void ReadChipMemory (void *pdata, USHORT base, USHORT length, USHORT port) { USHORT z, zz; UCHAR *pd = (UCHAR *)pdata; outb_p (SEL_NONE, port + REG_SEL_FAIL); // setup data port zz = 0; while ( zz < length ) { outw_p (base, port + REG_ADDRESS); // setup address for ( z = 0; z < 8; z++ ) { if ( (zz + z) < length ) *pd++ = inb_p (port + z); // read data byte } zz += 8; base += 8; } } /**************************************************************** * Name: Psi240i_Detect * * Description: Detect and initialize our boards. * * Parameters: tpnt - Pointer to SCSI host template structure. * * Returns: Number of adapters found. * ****************************************************************/ int Psi240i_Detect (Scsi_Host_Template *tpnt) { int board; int count = 0; int unit; int z; USHORT port; CHIP_CONFIG_N chipConfig; CHIP_DEVICE_N chipDevice[8]; struct Scsi_Host *pshost; ULONG flags; for ( board = 0; board < 6; board++ ) // scan for I/O ports { port = portAddr[board]; // get base address to test if ( check_region (port, 16) ) // test for I/O addresses available continue; // nope if ( inb_p (port + REG_FAIL) != CHIP_ID ) // do the first test for likley hood that it is us continue; outb_p (SEL_NONE, port + REG_SEL_FAIL); // setup EEPROM/RAM access outw (0, port + REG_ADDRESS); // setup EEPROM address zero if ( inb_p (port) != 0x55 ) // test 1st byte continue; // nope if ( inb_p (port + 1) != 0xAA ) // test 2nd byte continue; // nope // at this point our board is found and can be accessed. Now we need to initialize // our informatation and register with the kernel. ReadChipMemory (&chipConfig, CHIP_CONFIG, sizeof (chipConfig), port); ReadChipMemory (&chipDevice, CHIP_DEVICE, sizeof (chipDevice), port); ReadChipMemory (&ChipSetup, CHIP_EEPROM_DATA, sizeof (ChipSetup), port); if ( !chipConfig.numDrives ) // if no devices on this board continue; pshost = scsi_register (tpnt, sizeof(ADAPTER240I)); if(pshost == NULL) continue; save_flags (flags); cli (); if ( request_irq (chipConfig.irq, do_Irq_Handler, 0, "psi240i", NULL) ) { printk ("Unable to allocate IRQ for PSI-240I controller.\n"); restore_flags (flags); goto unregister; } PsiHost[chipConfig.irq - 10] = pshost; pshost->unique_id = port; pshost->io_port = port; pshost->n_io_port = 16; /* Number of bytes of I/O space used */ pshost->irq = chipConfig.irq; for ( z = 0; z < 11; z++ ) // build regester address array HOSTDATA(pshost)->ports[z] = port + z; HOSTDATA(pshost)->ports[11] = port + REG_FAIL; HOSTDATA(pshost)->ports[12] = port + REG_ALT_STAT; DEB (printk ("\nPorts =")); DEB (for (z=0;z<13;z++) printk(" %#04X",HOSTDATA(pshost)->ports[z]);); for ( z = 0; z < chipConfig.numDrives; ++z ) { unit = chipDevice[z].channel & 0x0F; HOSTDATA(pshost)->device[unit].device = ChipSetup.setupDevice[unit].device; HOSTDATA(pshost)->device[unit].byte6 = (UCHAR)(((unit & 1) << 4) | 0xE0); HOSTDATA(pshost)->device[unit].spigot = (UCHAR)(1 << (unit >> 1)); HOSTDATA(pshost)->device[unit].sectors = ChipSetup.setupDevice[unit].sectors; HOSTDATA(pshost)->device[unit].heads = ChipSetup.setupDevice[unit].heads; HOSTDATA(pshost)->device[unit].cylinders = ChipSetup.setupDevice[unit].cylinders; HOSTDATA(pshost)->device[unit].blocks = ChipSetup.setupDevice[unit].blocks; DEB (printk ("\nHOSTDATA->device = %X", HOSTDATA(pshost)->device[unit].device)); DEB (printk ("\n byte6 = %X", HOSTDATA(pshost)->device[unit].byte6)); DEB (printk ("\n spigot = %X", HOSTDATA(pshost)->device[unit].spigot)); DEB (printk ("\n sectors = %X", HOSTDATA(pshost)->device[unit].sectors)); DEB (printk ("\n heads = %X", HOSTDATA(pshost)->device[unit].heads)); DEB (printk ("\n cylinders = %X", HOSTDATA(pshost)->device[unit].cylinders)); DEB (printk ("\n blocks = %lX", HOSTDATA(pshost)->device[unit].blocks)); } restore_flags (flags); printk("\nPSI-240I EIDE CONTROLLER: at I/O = %x IRQ = %d\n", port, chipConfig.irq); printk("(C) 1997 Perceptive Solutions, Inc. All rights reserved\n\n"); count++; continue; unregister:; scsi_unregister (pshost); } return count; } /**************************************************************** * Name: Psi240i_Abort * * Description: Process the Abort command from the SCSI manager. * * Parameters: SCpnt - Pointer to SCSI command structure. * * Returns: Allways snooze. * ****************************************************************/ int Psi240i_Abort (Scsi_Cmnd *SCpnt) { DEB (printk ("psi240i_abort\n")); return SCSI_ABORT_SNOOZE; } /**************************************************************** * Name: Psi240i_Reset * * Description: Process the Reset command from the SCSI manager. * * Parameters: SCpnt - Pointer to SCSI command structure. * flags - Flags about the reset command * * Returns: No active command at this time, so this means * that each time we got some kind of response the * last time through. Tell the mid-level code to * request sense information in order to decide what * to do next. * ****************************************************************/ int Psi240i_Reset (Scsi_Cmnd *SCpnt, unsigned int reset_flags) { return SCSI_RESET_PUNT; } #include "sd.h" /**************************************************************** * Name: Psi240i_BiosParam * * Description: Process the biosparam request from the SCSI manager to * return C/H/S data. * * Parameters: disk - Pointer to SCSI disk structure. * dev - Major/minor number from kernel. * geom - Pointer to integer array to place geometry data. * * Returns: zero. * ****************************************************************/ int Psi240i_BiosParam (Scsi_Disk *disk, kdev_t dev, int geom[]) { POUR_DEVICE pdev; pdev = &(HOSTDATA(disk->device->host)->device[disk->device->id]); geom[0] = pdev->heads; geom[1] = pdev->sectors; geom[2] = pdev->cylinders; return 0; } MODULE_LICENSE("GPL"); /* Eventually this will go into an include file, but this will be later */ static Scsi_Host_Template driver_template = PSI240I; #include "scsi_module.c"
Go to most recent revision | Compare with Previous | Blame | View Log