OpenCores
URL https://opencores.org/ocsvn/or1k/or1k/trunk

Subversion Repositories or1k

[/] [or1k/] [trunk/] [linux/] [linux-2.4/] [drivers/] [usb/] [storage/] [dpcm.c] - Rev 1765

Compare with Previous | Blame | View Log

/* Driver for Microtech DPCM-USB CompactFlash/SmartMedia reader
 *
 * $Id: dpcm.c,v 1.1.1.1 2004-04-15 01:55:05 phoenix Exp $
 *
 * DPCM driver v0.1:
 *
 * First release
 *
 * Current development and maintenance by:
 *   (c) 2000 Brian Webb (webbb@earthlink.net)
 *
 * This device contains both a CompactFlash card reader, which
 * uses the Control/Bulk w/o Interrupt protocol and
 * a SmartMedia card reader that uses the same protocol
 * as the SDDR09.
 *
 * This program is free software; you can redistribute it and/or modify it
 * under the terms of the GNU General Public License as published by the
 * Free Software Foundation; either version 2, or (at your option) any
 * later version.
 *
 * This program is distributed in the hope that it will be useful, but
 * WITHOUT ANY WARRANTY; without even the implied warranty of
 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
 * General Public License for more details.
 *
 * You should have received a copy of the GNU General Public License along
 * with this program; if not, write to the Free Software Foundation, Inc.,
 * 675 Mass Ave, Cambridge, MA 02139, USA.
 */
 
#include <linux/config.h>
#include "transport.h"
#include "protocol.h"
#include "usb.h"
#include "debug.h"
#include "dpcm.h"
#include "sddr09.h"
 
/*
 * Transport for the Microtech DPCM-USB
 *
 */
int dpcm_transport(Scsi_Cmnd *srb, struct us_data *us)
{
  int ret;
 
  if(srb == NULL)
    return USB_STOR_TRANSPORT_ERROR;
 
  US_DEBUGP("dpcm_transport: LUN=%d\n", srb->lun);
 
  switch(srb->lun) {
  case 0:
 
    /*
     * LUN 0 corresponds to the CompactFlash card reader.
     */
    return usb_stor_CB_transport(srb, us);
 
#ifdef CONFIG_USB_STORAGE_SDDR09
  case 1:
 
    /*
     * LUN 1 corresponds to the SmartMedia card reader.
     */
 
    /*
     * Set the LUN to 0 (just in case).
     */
    srb->lun = 0; us->srb->lun = 0;
    ret = sddr09_transport(srb, us);
    srb->lun = 1; us->srb->lun = 1;
 
    return ret;
#endif
 
  default:
    US_DEBUGP("dpcm_transport: Invalid LUN %d\n", srb->lun);
    return USB_STOR_TRANSPORT_ERROR;
  }
}
 

Compare with Previous | Blame | View Log

powered by: WebSVN 2.1.0

© copyright 1999-2025 OpenCores.org, equivalent to Oliscience, all rights reserved. OpenCores®, registered trademark.