URL
https://opencores.org/ocsvn/or1k/or1k/trunk
Subversion Repositories or1k
[/] [or1k/] [trunk/] [linux/] [linux-2.4/] [include/] [asm-arm/] [arch-clps711x/] [syspld.h] - Rev 1774
Go to most recent revision | Compare with Previous | Blame | View Log
/* * linux/include/asm-arm/arch-clps711x/syspld.h * * System Control PLD register definitions. * * Copyright (C) 2000 Deep Blue Solutions Ltd. * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by * the Free Software Foundation; either version 2 of the License, or * (at your option) any later version. * * This program is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * * You should have received a copy of the GNU General Public License * along with this program; if not, write to the Free Software * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA */ #ifndef __ASM_ARCH_SYSPLD_H #define __ASM_ARCH_SYSPLD_H #define SYSPLD_PHYS_BASE (0x10000000) #ifndef __ASSEMBLY__ #include <asm/types.h> #define SYSPLD_REG(type,off) (*(volatile type *)(SYSPLD_BASE + off)) #else #define SYSPLD_REG(type,off) (off) #endif #define PLD_INT SYSPLD_REG(u32, 0x000000) #define PLD_INT_PENIRQ (1 << 5) #define PLD_INT_UCB_IRQ (1 << 1) #define PLD_INT_KBD_ATN (1 << 0) /* EINT1 */ #define PLD_PWR SYSPLD_REG(u32, 0x000004) #define PLD_PWR_EXT (1 << 5) #define PLD_PWR_MODE (1 << 4) /* 1 = PWM, 0 = PFM */ #define PLD_S4_ON (1 << 3) /* LCD bias voltage enable */ #define PLD_S3_ON (1 << 2) /* LCD backlight enable */ #define PLD_S2_ON (1 << 1) /* LCD 3V3 supply enable */ #define PLD_S1_ON (1 << 0) /* LCD 3V supply enable */ #define PLD_KBD SYSPLD_REG(u32, 0x000008) #define PLD_KBD_WAKE (1 << 1) #define PLD_KBD_EN (1 << 0) #define PLD_SPI SYSPLD_REG(u32, 0x00000c) #define PLD_SPI_EN (1 << 0) #define PLD_IO SYSPLD_REG(u32, 0x000010) #define PLD_IO_BOOTSEL (1 << 6) /* boot sel switch */ #define PLD_IO_USER (1 << 5) /* user defined switch */ #define PLD_IO_LED3 (1 << 4) #define PLD_IO_LED2 (1 << 3) #define PLD_IO_LED1 (1 << 2) #define PLD_IO_LED0 (1 << 1) #define PLD_IO_LEDEN (1 << 0) #define PLD_IRDA SYSPLD_REG(u32, 0x000014) #define PLD_IRDA_EN (1 << 0) #define PLD_COM2 SYSPLD_REG(u32, 0x000018) #define PLD_COM2_EN (1 << 0) #define PLD_COM1 SYSPLD_REG(u32, 0x00001c) #define PLD_COM1_EN (1 << 0) #define PLD_AUD SYSPLD_REG(u32, 0x000020) #define PLD_AUD_DIV1 (1 << 6) #define PLD_AUD_DIV0 (1 << 5) #define PLD_AUD_CLK_SEL1 (1 << 4) #define PLD_AUD_CLK_SEL0 (1 << 3) #define PLD_AUD_MIC_PWR (1 << 2) #define PLD_AUD_MIC_GAIN (1 << 1) #define PLD_AUD_CODEC_EN (1 << 0) #define PLD_CF SYSPLD_REG(u32, 0x000024) #define PLD_CF2_SLEEP (1 << 5) #define PLD_CF1_SLEEP (1 << 4) #define PLD_CF2_nPDREQ (1 << 3) #define PLD_CF1_nPDREQ (1 << 2) #define PLD_CF2_nIRQ (1 << 1) #define PLD_CF1_nIRQ (1 << 0) #define PLD_SDC SYSPLD_REG(u32, 0x000028) #define PLD_SDC_INT_EN (1 << 2) #define PLD_SDC_WP (1 << 1) #define PLD_SDC_CD (1 << 0) #define PLD_FPGA SYSPLD_REG(u32, 0x00002c) #define PLD_CODEC SYSPLD_REG(u32, 0x400000) #define PLD_CODEC_IRQ3 (1 << 4) #define PLD_CODEC_IRQ2 (1 << 3) #define PLD_CODEC_IRQ1 (1 << 2) #define PLD_CODEC_EN (1 << 0) #define PLD_BRITE SYSPLD_REG(u32, 0x400004) #define PLD_BRITE_UP (1 << 1) #define PLD_BRITE_DN (1 << 0) #define PLD_LCDEN SYSPLD_REG(u32, 0x400008) #define PLD_LCDEN_EN (1 << 0) #define PLD_ID SYSPLD_REG(u32, 0x40000c) #define PLD_TCH SYSPLD_REG(u32, 0x400010) #define PLD_TCH_PENIRQ (1 << 1) #define PLD_TCH_EN (1 << 0) #define PLD_GPIO SYSPLD_REG(u32, 0x400014) #define PLD_GPIO2 (1 << 2) #define PLD_GPIO1 (1 << 1) #define PLD_GPIO0 (1 << 0) #endif
Go to most recent revision | Compare with Previous | Blame | View Log