URL
https://opencores.org/ocsvn/or1k/or1k/trunk
Subversion Repositories or1k
[/] [or1k/] [trunk/] [linux/] [linux-2.4/] [include/] [asm-m68k/] [sun3xflop.h] - Rev 1774
Go to most recent revision | Compare with Previous | Blame | View Log
/* sun3xflop.h: Sun3/80 specific parts of the floppy driver. * * Derived partially from asm-sparc/floppy.h, which is: * Copyright (C) 1995 David S. Miller (davem@caip.rutgers.edu) * * Sun3x version 2/4/2000 Sam Creasey (sammy@sammy.net) */ #ifndef __ASM_SUN3X_FLOPPY_H #define __ASM_SUN3X_FLOPPY_H #include <asm/page.h> #include <asm/pgtable.h> #include <asm/system.h> #include <asm/irq.h> #include <asm/sun3x.h> /* default interrupt vector */ #define SUN3X_FDC_IRQ 0x40 /* some constants */ #define FCR_TC 0x1 #define FCR_EJECT 0x2 #define FCR_MTRON 0x4 #define FCR_DSEL1 0x8 #define FCR_DSEL0 0x10 /* We don't need no stinkin' I/O port allocation crap. */ #undef release_region #undef check_region #undef request_region #define release_region(X, Y) do { } while(0) #define check_region(X, Y) (0) #define request_region(X, Y, Z) (1) struct sun3xflop_private { volatile unsigned char *status_r; volatile unsigned char *data_r; volatile unsigned char *fcr_r; volatile unsigned char *fvr_r; unsigned char fcr; } sun3x_fdc; /* Super paranoid... */ #undef HAVE_DISABLE_HLT /* Routines unique to each controller type on a Sun. */ static unsigned char sun3x_82072_fd_inb(int port) { static int once = 0; // udelay(5); switch(port & 7) { default: printk("floppy: Asked to read unknown port %d\n", port); panic("floppy: Port bolixed."); case 4: /* FD_STATUS */ return (*sun3x_fdc.status_r) & ~STATUS_DMA; case 5: /* FD_DATA */ return (*sun3x_fdc.data_r); case 7: /* FD_DIR */ /* ugly hack, I can't find a way to actually detect the disk */ if(!once) { once = 1; return 0x80; } return 0; }; panic("sun_82072_fd_inb: How did I get here?"); } static void sun3x_82072_fd_outb(unsigned char value, int port) { // udelay(5); switch(port & 7) { default: printk("floppy: Asked to write to unknown port %d\n", port); panic("floppy: Port bolixed."); case 2: /* FD_DOR */ /* Oh geese, 82072 on the Sun has no DOR register, * so we make do with taunting the FCR. * * ASSUMPTIONS: There will only ever be one floppy * drive attached to a Sun controller * and it will be at drive zero. */ { unsigned char fcr = sun3x_fdc.fcr; if(value & 0x10) { fcr |= (FCR_DSEL0 | FCR_MTRON); } else fcr &= ~(FCR_DSEL0 | FCR_MTRON); if(fcr != sun3x_fdc.fcr) { *(sun3x_fdc.fcr_r) = fcr; sun3x_fdc.fcr = fcr; } } break; case 5: /* FD_DATA */ *(sun3x_fdc.data_r) = value; break; case 7: /* FD_DCR */ *(sun3x_fdc.status_r) = value; break; case 4: /* FD_STATUS */ *(sun3x_fdc.status_r) = value; break; }; return; } asmlinkage void sun3xflop_hardint(int irq, void *dev_id, struct pt_regs * regs) { register unsigned char st; #undef TRACE_FLPY_INT #define NO_FLOPPY_ASSEMBLER #ifdef TRACE_FLPY_INT static int calls=0; static int bytes=0; static int dma_wait=0; #endif if(!doing_pdma) { floppy_interrupt(irq, dev_id, regs); return; } // printk("doing pdma\n");// st %x\n", sun_fdc->status_82072); #ifdef TRACE_FLPY_INT if(!calls) bytes = virtual_dma_count; #endif { register int lcount; register char *lptr; for(lcount=virtual_dma_count, lptr=virtual_dma_addr; lcount; lcount--, lptr++) { /* st=fd_inb(virtual_dma_port+4) & 0x80 ; */ st = *(sun3x_fdc.status_r); /* if(st != 0xa0) */ /* break; */ if((st & 0x80) == 0) { virtual_dma_count = lcount; virtual_dma_addr = lptr; return; } if((st & 0x20) == 0) break; if(virtual_dma_mode) /* fd_outb(*lptr, virtual_dma_port+5); */ *(sun3x_fdc.data_r) = *lptr; else /* *lptr = fd_inb(virtual_dma_port+5); */ *lptr = *(sun3x_fdc.data_r); } virtual_dma_count = lcount; virtual_dma_addr = lptr; /* st = fd_inb(virtual_dma_port+4); */ st = *(sun3x_fdc.status_r); } #ifdef TRACE_FLPY_INT calls++; #endif // printk("st=%02x\n", st); if(st == 0x20) return; if(!(st & 0x20)) { virtual_dma_residue += virtual_dma_count; virtual_dma_count=0; doing_pdma = 0; #ifdef TRACE_FLPY_INT printk("count=%x, residue=%x calls=%d bytes=%x dma_wait=%d\n", virtual_dma_count, virtual_dma_residue, calls, bytes, dma_wait); calls = 0; dma_wait=0; #endif floppy_interrupt(irq, dev_id, regs); return; } #ifdef TRACE_FLPY_INT if(!virtual_dma_count) dma_wait++; #endif } static int sun3xflop_request_irq(void) { static int once = 0; int error; if(!once) { once = 1; error = request_irq(FLOPPY_IRQ, sun3xflop_hardint, SA_INTERRUPT, "floppy", 0); return ((error == 0) ? 0 : -1); } else return 0; } static void __init floppy_set_flags(int *ints,int param, int param2); static int sun3xflop_init(void) { if(FLOPPY_IRQ < 0x40) FLOPPY_IRQ = SUN3X_FDC_IRQ; sun3x_fdc.status_r = (volatile unsigned char *)SUN3X_FDC; sun3x_fdc.data_r = (volatile unsigned char *)(SUN3X_FDC+1); sun3x_fdc.fcr_r = (volatile unsigned char *)SUN3X_FDC_FCR; sun3x_fdc.fvr_r = (volatile unsigned char *)SUN3X_FDC_FVR; sun3x_fdc.fcr = 0; /* Last minute sanity check... */ if(*sun3x_fdc.status_r == 0xff) { return -1; } *sun3x_fdc.fvr_r = FLOPPY_IRQ; *sun3x_fdc.fcr_r = FCR_TC; udelay(10); *sun3x_fdc.fcr_r = 0; /* Success... */ floppy_set_flags(0, 1, FD_BROKEN_DCL); // I don't know how to detect this. allowed_drive_mask = 0x01; return (int) SUN3X_FDC; } /* I'm not precisely sure this eject routine works */ static int sun3x_eject(void) { if(MACH_IS_SUN3X) { sun3x_fdc.fcr |= (FCR_DSEL0 | FCR_EJECT); *(sun3x_fdc.fcr_r) = sun3x_fdc.fcr; udelay(10); sun3x_fdc.fcr &= ~(FCR_DSEL0 | FCR_EJECT); *(sun3x_fdc.fcr_r) = sun3x_fdc.fcr; } return 0; } #define fd_eject(drive) sun3x_eject() #endif /* !(__ASM_SUN3X_FLOPPY_H) */
Go to most recent revision | Compare with Previous | Blame | View Log