URL
https://opencores.org/ocsvn/or1k/or1k/trunk
Subversion Repositories or1k
[/] [or1k/] [trunk/] [linux/] [linux-2.4/] [include/] [asm-m68k/] [uaccess.h] - Rev 1774
Go to most recent revision | Compare with Previous | Blame | View Log
#ifndef __M68K_UACCESS_H #define __M68K_UACCESS_H /* * User space memory access functions */ #include <linux/sched.h> #include <asm/segment.h> #define VERIFY_READ 0 #define VERIFY_WRITE 1 /* We let the MMU do all checking */ #define access_ok(type,addr,size) 1 static inline int verify_area(int type, const void *addr, unsigned long size) { return access_ok(type,addr,size)?0:-EFAULT; } /* * The exception table consists of pairs of addresses: the first is the * address of an instruction that is allowed to fault, and the second is * the address at which the program should continue. No registers are * modified, so it is entirely up to the continuation code to figure out * what to do. * * All the routines below use bits of fixup code that are out of line * with the main instruction path. This means when everything is well, * we don't even have to jump over them. Further, they do not intrude * on our cache or tlb entries. */ struct exception_table_entry { unsigned long insn, fixup; }; /* Returns 0 if exception not found and fixup otherwise. */ extern unsigned long search_exception_table(unsigned long); /* * These are the main single-value transfer routines. They automatically * use the right size if we just have the right pointer type. */ #define put_user(x, ptr) \ ({ \ int __pu_err; \ typeof(*(ptr)) __pu_val = (x); \ switch (sizeof (*(ptr))) { \ case 1: \ __put_user_asm(__pu_err, __pu_val, ptr, b); \ break; \ case 2: \ __put_user_asm(__pu_err, __pu_val, ptr, w); \ break; \ case 4: \ __put_user_asm(__pu_err, __pu_val, ptr, l); \ break; \ case 8: \ __pu_err = __constant_copy_to_user(ptr, &__pu_val, 8); \ break; \ default: \ __pu_err = __put_user_bad(); \ break; \ } \ __pu_err; \ }) #define __put_user(x, ptr) put_user(x, ptr) extern int __put_user_bad(void); /* * Tell gcc we read from memory instead of writing: this is because * we do not write to any memory gcc knows about, so there are no * aliasing issues. */ #define __put_user_asm(err,x,ptr,bwl) \ __asm__ __volatile__ \ ("21:moves" #bwl " %2,%1\n" \ "1:\n" \ ".section .fixup,\"ax\"\n" \ " .even\n" \ "2: movel %3,%0\n" \ " jra 1b\n" \ ".previous\n" \ ".section __ex_table,\"a\"\n" \ " .align 4\n" \ " .long 21b,2b\n" \ " .long 1b,2b\n" \ ".previous" \ : "=d"(err) \ : "m"(*(ptr)), "r"(x), "i"(-EFAULT), "0"(0)) #define get_user(x, ptr) \ ({ \ int __gu_err; \ typeof(*(ptr)) __gu_val; \ switch (sizeof(*(ptr))) { \ case 1: \ __get_user_asm(__gu_err, __gu_val, ptr, b, "=d"); \ break; \ case 2: \ __get_user_asm(__gu_err, __gu_val, ptr, w, "=r"); \ break; \ case 4: \ __get_user_asm(__gu_err, __gu_val, ptr, l, "=r"); \ break; \ case 8: \ __gu_err = __constant_copy_from_user(&__gu_val, ptr, 8); \ break; \ default: \ __gu_val = 0; \ __gu_err = __get_user_bad(); \ break; \ } \ (x) = __gu_val; \ __gu_err; \ }) #define __get_user(x, ptr) get_user(x, ptr) extern int __get_user_bad(void); #define __get_user_asm(err,x,ptr,bwl,reg) \ __asm__ __volatile__ \ ("1: moves" #bwl " %2,%1\n" \ "2:\n" \ ".section .fixup,\"ax\"\n" \ " .even\n" \ "3: movel %3,%0\n" \ " sub" #bwl " %1,%1\n" \ " jra 2b\n" \ ".previous\n" \ ".section __ex_table,\"a\"\n" \ " .align 4\n" \ " .long 1b,3b\n" \ ".previous" \ : "=d"(err), reg(x) \ : "m"(*(ptr)), "i" (-EFAULT), "0"(0)) static inline unsigned long __generic_copy_from_user(void *to, const void *from, unsigned long n) { unsigned long tmp; __asm__ __volatile__ (" tstl %2\n" " jeq 2f\n" "1: movesl (%1)+,%3\n" " movel %3,(%0)+\n" " subql #1,%2\n" " jne 1b\n" "2: movel %4,%2\n" " bclr #1,%2\n" " jeq 4f\n" "3: movesw (%1)+,%3\n" " movew %3,(%0)+\n" "4: bclr #0,%2\n" " jeq 6f\n" "5: movesb (%1)+,%3\n" " moveb %3,(%0)+\n" "6:\n" ".section .fixup,\"ax\"\n" " .even\n" "7: movel %2,%%d0\n" "71:clrl (%0)+\n" " subql #1,%%d0\n" " jne 71b\n" " lsll #2,%2\n" " addl %4,%2\n" " btst #1,%4\n" " jne 81f\n" " btst #0,%4\n" " jne 91f\n" " jra 6b\n" "8: addql #2,%2\n" "81:clrw (%0)+\n" " btst #0,%4\n" " jne 91f\n" " jra 6b\n" "9: addql #1,%2\n" "91:clrb (%0)+\n" " jra 6b\n" ".previous\n" ".section __ex_table,\"a\"\n" " .align 4\n" " .long 1b,7b\n" " .long 3b,8b\n" " .long 5b,9b\n" ".previous" : "=a"(to), "=a"(from), "=d"(n), "=&d"(tmp) : "d"(n & 3), "0"(to), "1"(from), "2"(n/4) : "d0", "memory"); return n; } static inline unsigned long __generic_copy_to_user(void *to, const void *from, unsigned long n) { unsigned long tmp; __asm__ __volatile__ (" tstl %2\n" " jeq 3f\n" "1: movel (%1)+,%3\n" "22:movesl %3,(%0)+\n" "2: subql #1,%2\n" " jne 1b\n" "3: movel %4,%2\n" " bclr #1,%2\n" " jeq 4f\n" " movew (%1)+,%3\n" "24:movesw %3,(%0)+\n" "4: bclr #0,%2\n" " jeq 5f\n" " moveb (%1)+,%3\n" "25:movesb %3,(%0)+\n" "5:\n" ".section .fixup,\"ax\"\n" " .even\n" "60:addql #1,%2\n" "6: lsll #2,%2\n" " addl %4,%2\n" " jra 5b\n" "7: addql #2,%2\n" " jra 5b\n" "8: addql #1,%2\n" " jra 5b\n" ".previous\n" ".section __ex_table,\"a\"\n" " .align 4\n" " .long 1b,60b\n" " .long 22b,6b\n" " .long 2b,6b\n" " .long 24b,7b\n" " .long 3b,60b\n" " .long 4b,7b\n" " .long 25b,8b\n" " .long 5b,8b\n" ".previous" : "=a"(to), "=a"(from), "=d"(n), "=&d"(tmp) : "r"(n & 3), "0"(to), "1"(from), "2"(n / 4) : "memory"); return n; } #define __copy_from_user_big(to, from, n, fixup, copy) \ __asm__ __volatile__ \ ("10: movesl (%1)+,%%d0\n" \ " movel %%d0,(%0)+\n" \ " subql #1,%2\n" \ " jne 10b\n" \ ".section .fixup,\"ax\"\n" \ " .even\n" \ "11: movel %2,%%d0\n" \ "13: clrl (%0)+\n" \ " subql #1,%%d0\n" \ " jne 13b\n" \ " lsll #2,%2\n" \ fixup "\n" \ " jra 12f\n" \ ".previous\n" \ ".section __ex_table,\"a\"\n" \ " .align 4\n" \ " .long 10b,11b\n" \ ".previous\n" \ copy "\n" \ "12:" \ : "=a"(to), "=a"(from), "=d"(n) \ : "0"(to), "1"(from), "2"(n/4) \ : "d0", "memory") static inline unsigned long __constant_copy_from_user(void *to, const void *from, unsigned long n) { switch (n) { case 0: break; case 1: __asm__ __volatile__ ("1: movesb (%1)+,%%d0\n" " moveb %%d0,(%0)+\n" "2:\n" ".section .fixup,\"ax\"\n" " .even\n" "3: addql #1,%2\n" " clrb (%0)+\n" " jra 2b\n" ".previous\n" ".section __ex_table,\"a\"\n" " .align 4\n" " .long 1b,3b\n" ".previous" : "=a"(to), "=a"(from), "=d"(n) : "0"(to), "1"(from), "2"(0) : "d0", "memory"); break; case 2: __asm__ __volatile__ ("1: movesw (%1)+,%%d0\n" " movew %%d0,(%0)+\n" "2:\n" ".section .fixup,\"ax\"\n" " .even\n" "3: addql #2,%2\n" " clrw (%0)+\n" " jra 2b\n" ".previous\n" ".section __ex_table,\"a\"\n" " .align 4\n" " .long 1b,3b\n" ".previous" : "=a"(to), "=a"(from), "=d"(n) : "0"(to), "1"(from), "2"(0) : "d0", "memory"); break; case 3: __asm__ __volatile__ ("1: movesw (%1)+,%%d0\n" " movew %%d0,(%0)+\n" "2: movesb (%1)+,%%d0\n" " moveb %%d0,(%0)+\n" "3:" ".section .fixup,\"ax\"\n" " .even\n" "4: addql #2,%2\n" " clrw (%0)+\n" "5: addql #1,%2\n" " clrb (%0)+\n" " jra 3b\n" ".previous\n" ".section __ex_table,\"a\"\n" " .align 4\n" " .long 1b,4b\n" " .long 2b,5b\n" ".previous" : "=a"(to), "=a"(from), "=d"(n) : "0"(to), "1"(from), "2"(0) : "d0", "memory"); break; case 4: __asm__ __volatile__ ("1: movesl (%1)+,%%d0\n" " movel %%d0,(%0)+\n" "2:" ".section .fixup,\"ax\"\n" " .even\n" "3: addql #4,%2\n" " clrl (%0)+\n" " jra 2b\n" ".previous\n" ".section __ex_table,\"a\"\n" " .align 4\n" " .long 1b,3b\n" ".previous" : "=a"(to), "=a"(from), "=d"(n) : "0"(to), "1"(from), "2"(0) : "d0", "memory"); break; case 8: __asm__ __volatile__ ("1: movesl (%1)+,%%d0\n" " movel %%d0,(%0)+\n" "2: movesl (%1)+,%%d0\n" " movel %%d0,(%0)+\n" "3:" ".section .fixup,\"ax\"\n" " .even\n" "4: addql #4,%2\n" " clrl (%0)+\n" "5: addql #4,%2\n" " clrl (%0)+\n" " jra 3b\n" ".previous\n" ".section __ex_table,\"a\"\n" " .align 4\n" " .long 1b,4b\n" " .long 2b,5b\n" ".previous" : "=a"(to), "=a"(from), "=d"(n) : "0"(to), "1"(from), "2"(0) : "d0", "memory"); break; case 12: __asm__ __volatile__ ("1: movesl (%1)+,%%d0\n" " movel %%d0,(%0)+\n" "2: movesl (%1)+,%%d0\n" " movel %%d0,(%0)+\n" "3: movesl (%1)+,%%d0\n" " movel %%d0,(%0)+\n" "4:" ".section .fixup,\"ax\"\n" " .even\n" "5: addql #4,%2\n" " clrl (%0)+\n" "6: addql #4,%2\n" " clrl (%0)+\n" "7: addql #4,%2\n" " clrl (%0)+\n" " jra 4b\n" ".previous\n" ".section __ex_table,\"a\"\n" " .align 4\n" " .long 1b,5b\n" " .long 2b,6b\n" " .long 3b,7b\n" ".previous" : "=a"(to), "=a"(from), "=d"(n) : "0"(to), "1"(from), "2"(0) : "d0", "memory"); break; case 16: __asm__ __volatile__ ("1: movesl (%1)+,%%d0\n" " movel %%d0,(%0)+\n" "2: movesl (%1)+,%%d0\n" " movel %%d0,(%0)+\n" "3: movesl (%1)+,%%d0\n" " movel %%d0,(%0)+\n" "4: movesl (%1)+,%%d0\n" " movel %%d0,(%0)+\n" "5:" ".section .fixup,\"ax\"\n" " .even\n" "6: addql #4,%2\n" " clrl (%0)+\n" "7: addql #4,%2\n" " clrl (%0)+\n" "8: addql #4,%2\n" " clrl (%0)+\n" "9: addql #4,%2\n" " clrl (%0)+\n" " jra 5b\n" ".previous\n" ".section __ex_table,\"a\"\n" " .align 4\n" " .long 1b,6b\n" " .long 2b,7b\n" " .long 3b,8b\n" " .long 4b,9b\n" ".previous" : "=a"(to), "=a"(from), "=d"(n) : "0"(to), "1"(from), "2"(0) : "d0", "memory"); break; default: switch (n & 3) { case 0: __copy_from_user_big(to, from, n, "", ""); break; case 1: __copy_from_user_big(to, from, n, /* fixup */ "1: addql #1,%2\n" " clrb (%0)+", /* copy */ "2: movesb (%1)+,%%d0\n" " moveb %%d0,(%0)+\n" ".section __ex_table,\"a\"\n" " .long 2b,1b\n" ".previous"); break; case 2: __copy_from_user_big(to, from, n, /* fixup */ "1: addql #2,%2\n" " clrw (%0)+", /* copy */ "2: movesw (%1)+,%%d0\n" " movew %%d0,(%0)+\n" ".section __ex_table,\"a\"\n" " .long 2b,1b\n" ".previous"); break; case 3: __copy_from_user_big(to, from, n, /* fixup */ "1: addql #2,%2\n" " clrw (%0)+\n" "2: addql #1,%2\n" " clrb (%0)+", /* copy */ "3: movesw (%1)+,%%d0\n" " movew %%d0,(%0)+\n" "4: movesb (%1)+,%%d0\n" " moveb %%d0,(%0)+\n" ".section __ex_table,\"a\"\n" " .long 3b,1b\n" " .long 4b,2b\n" ".previous"); break; } break; } return n; } #define __copy_to_user_big(to, from, n, fixup, copy) \ __asm__ __volatile__ \ ("10: movel (%1)+,%%d0\n" \ "31: movesl %%d0,(%0)+\n" \ "11: subql #1,%2\n" \ " jne 10b\n" \ "41:\n" \ ".section .fixup,\"ax\"\n" \ " .even\n" \ "22: addql #1,%2\n" \ "12: lsll #2,%2\n" \ fixup "\n" \ " jra 13f\n" \ ".previous\n" \ ".section __ex_table,\"a\"\n" \ " .align 4\n" \ " .long 10b,22b\n" \ " .long 31b,12b\n" \ " .long 11b,12b\n" \ " .long 41b,22b\n" \ ".previous\n" \ copy "\n" \ "13:" \ : "=a"(to), "=a"(from), "=d"(n) \ : "0"(to), "1"(from), "2"(n/4) \ : "d0", "memory") static inline unsigned long __constant_copy_to_user(void *to, const void *from, unsigned long n) { switch (n) { case 0: break; case 1: __asm__ __volatile__ (" moveb (%1)+,%%d0\n" "21:movesb %%d0,(%0)+\n" "1:\n" ".section .fixup,\"ax\"\n" " .even\n" "2: addql #1,%2\n" " jra 1b\n" ".previous\n" ".section __ex_table,\"a\"\n" " .align 4\n " " .long 21b,2b\n" " .long 1b,2b\n" ".previous" : "=a"(to), "=a"(from), "=d"(n) : "0"(to), "1"(from), "2"(0) : "d0", "memory"); break; case 2: __asm__ __volatile__ (" movew (%1)+,%%d0\n" "21:movesw %%d0,(%0)+\n" "1:\n" ".section .fixup,\"ax\"\n" " .even\n" "2: addql #2,%2\n" " jra 1b\n" ".previous\n" ".section __ex_table,\"a\"\n" " .align 4\n" " .long 21b,2b\n" " .long 1b,2b\n" ".previous" : "=a"(to), "=a"(from), "=d"(n) : "0"(to), "1"(from), "2"(0) : "d0", "memory"); break; case 3: __asm__ __volatile__ (" movew (%1)+,%%d0\n" "21:movesw %%d0,(%0)+\n" "1: moveb (%1)+,%%d0\n" "22:movesb %%d0,(%0)+\n" "2:\n" ".section .fixup,\"ax\"\n" " .even\n" "3: addql #2,%2\n" "4: addql #1,%2\n" " jra 2b\n" ".previous\n" ".section __ex_table,\"a\"\n" " .align 4\n" " .long 21b,3b\n" " .long 1b,3b\n" " .long 22b,4b\n" " .long 2b,4b\n" ".previous" : "=a"(to), "=a"(from), "=d"(n) : "0"(to), "1"(from), "2"(0) : "d0", "memory"); break; case 4: __asm__ __volatile__ (" movel (%1)+,%%d0\n" "21:movesl %%d0,(%0)+\n" "1:\n" ".section .fixup,\"ax\"\n" " .even\n" "2: addql #4,%2\n" " jra 1b\n" ".previous\n" ".section __ex_table,\"a\"\n" " .align 4\n" " .long 21b,2b\n" " .long 1b,2b\n" ".previous" : "=a"(to), "=a"(from), "=d"(n) : "0"(to), "1"(from), "2"(0) : "d0", "memory"); break; case 8: __asm__ __volatile__ (" movel (%1)+,%%d0\n" "21:movesl %%d0,(%0)+\n" "1: movel (%1)+,%%d0\n" "22:movesl %%d0,(%0)+\n" "2:\n" ".section .fixup,\"ax\"\n" " .even\n" "3: addql #4,%2\n" "4: addql #4,%2\n" " jra 2b\n" ".previous\n" ".section __ex_table,\"a\"\n" " .align 4\n" " .long 21b,3b\n" " .long 1b,3b\n" " .long 22b,4b\n" " .long 2b,4b\n" ".previous" : "=a"(to), "=a"(from), "=d"(n) : "0"(to), "1"(from), "2"(0) : "d0", "memory"); break; case 12: __asm__ __volatile__ (" movel (%1)+,%%d0\n" "21:movesl %%d0,(%0)+\n" "1: movel (%1)+,%%d0\n" "22:movesl %%d0,(%0)+\n" "2: movel (%1)+,%%d0\n" "23:movesl %%d0,(%0)+\n" "3:\n" ".section .fixup,\"ax\"\n" " .even\n" "4: addql #4,%2\n" "5: addql #4,%2\n" "6: addql #4,%2\n" " jra 3b\n" ".previous\n" ".section __ex_table,\"a\"\n" " .align 4\n" " .long 21b,4b\n" " .long 1b,4b\n" " .long 22b,5b\n" " .long 2b,5b\n" " .long 23b,6b\n" " .long 3b,6b\n" ".previous" : "=a"(to), "=a"(from), "=d"(n) : "0"(to), "1"(from), "2"(0) : "d0", "memory"); break; case 16: __asm__ __volatile__ (" movel (%1)+,%%d0\n" "21:movesl %%d0,(%0)+\n" "1: movel (%1)+,%%d0\n" "22:movesl %%d0,(%0)+\n" "2: movel (%1)+,%%d0\n" "23:movesl %%d0,(%0)+\n" "3: movel (%1)+,%%d0\n" "24:movesl %%d0,(%0)+\n" "4:" ".section .fixup,\"ax\"\n" " .even\n" "5: addql #4,%2\n" "6: addql #4,%2\n" "7: addql #4,%2\n" "8: addql #4,%2\n" " jra 4b\n" ".previous\n" ".section __ex_table,\"a\"\n" " .align 4\n" " .long 21b,5b\n" " .long 1b,5b\n" " .long 22b,6b\n" " .long 2b,6b\n" " .long 23b,7b\n" " .long 3b,7b\n" " .long 24b,8b\n" " .long 4b,8b\n" ".previous" : "=a"(to), "=a"(from), "=d"(n) : "0"(to), "1"(from), "2"(0) : "d0", "memory"); break; default: switch (n & 3) { case 0: __copy_to_user_big(to, from, n, "", ""); break; case 1: __copy_to_user_big(to, from, n, /* fixup */ "1: addql #1,%2", /* copy */ " moveb (%1)+,%%d0\n" "22:movesb %%d0,(%0)+\n" "2:" ".section __ex_table,\"a\"\n" " .long 22b,1b\n" " .long 2b,1b\n" ".previous"); break; case 2: __copy_to_user_big(to, from, n, /* fixup */ "1: addql #2,%2", /* copy */ " movew (%1)+,%%d0\n" "22:movesw %%d0,(%0)+\n" "2:" ".section __ex_table,\"a\"\n" " .long 22b,1b\n" " .long 2b,1b\n" ".previous"); break; case 3: __copy_to_user_big(to, from, n, /* fixup */ "1: addql #2,%2\n" "2: addql #1,%2", /* copy */ " movew (%1)+,%%d0\n" "23:movesw %%d0,(%0)+\n" "3: moveb (%1)+,%%d0\n" "24:movesb %%d0,(%0)+\n" "4:" ".section __ex_table,\"a\"\n" " .long 23b,1b\n" " .long 3b,1b\n" " .long 24b,2b\n" " .long 4b,2b\n" ".previous"); break; } break; } return n; } #define copy_from_user(to, from, n) \ (__builtin_constant_p(n) ? \ __constant_copy_from_user(to, from, n) : \ __generic_copy_from_user(to, from, n)) #define copy_to_user(to, from, n) \ (__builtin_constant_p(n) ? \ __constant_copy_to_user(to, from, n) : \ __generic_copy_to_user(to, from, n)) #define __copy_from_user(to, from, n) copy_from_user(to, from, n) #define __copy_to_user(to, from, n) copy_to_user(to, from, n) /* * Copy a null terminated string from userspace. */ static inline long strncpy_from_user(char *dst, const char *src, long count) { long res; if (count == 0) return count; __asm__ __volatile__ ("1: movesb (%2)+,%%d0\n" "12:moveb %%d0,(%1)+\n" " jeq 2f\n" " subql #1,%3\n" " jne 1b\n" "2: subl %3,%0\n" "3:\n" ".section .fixup,\"ax\"\n" " .even\n" "4: movel %4,%0\n" " jra 3b\n" ".previous\n" ".section __ex_table,\"a\"\n" " .align 4\n" " .long 1b,4b\n" " .long 12b,4b\n" ".previous" : "=d"(res), "=a"(dst), "=a"(src), "=d"(count) : "i"(-EFAULT), "0"(count), "1"(dst), "2"(src), "3"(count) : "d0", "memory"); return res; } /* * Return the size of a string (including the ending 0) * * Return 0 on exception, a value greater than N if too long */ static inline long strnlen_user(const char *src, long n) { long res; res = -(long)src; __asm__ __volatile__ ("1:\n" " tstl %2\n" " jeq 3f\n" "2: movesb (%1)+,%%d0\n" "22:\n" " subql #1,%2\n" " tstb %%d0\n" " jne 1b\n" " jra 4f\n" "3:\n" " addql #1,%0\n" "4:\n" " addl %1,%0\n" "5:\n" ".section .fixup,\"ax\"\n" " .even\n" "6: moveq %3,%0\n" " jra 5b\n" ".previous\n" ".section __ex_table,\"a\"\n" " .align 4\n" " .long 2b,6b\n" " .long 22b,6b\n" ".previous" : "=d"(res), "=a"(src), "=d"(n) : "i"(0), "0"(res), "1"(src), "2"(n) : "d0"); return res; } #define strlen_user(str) strnlen_user(str, 32767) /* * Zero Userspace */ static inline unsigned long clear_user(void *to, unsigned long n) { __asm__ __volatile__ (" tstl %1\n" " jeq 3f\n" "1: movesl %3,(%0)+\n" "2: subql #1,%1\n" " jne 1b\n" "3: movel %2,%1\n" " bclr #1,%1\n" " jeq 4f\n" "24:movesw %3,(%0)+\n" "4: bclr #0,%1\n" " jeq 5f\n" "25:movesb %3,(%0)+\n" "5:\n" ".section .fixup,\"ax\"\n" " .even\n" "61:addql #1,%1\n" "6: lsll #2,%1\n" " addl %2,%1\n" " jra 5b\n" "7: addql #2,%1\n" " jra 5b\n" "8: addql #1,%1\n" " jra 5b\n" ".previous\n" ".section __ex_table,\"a\"\n" " .align 4\n" " .long 1b,61b\n" " .long 2b,6b\n" " .long 3b,61b\n" " .long 24b,7b\n" " .long 4b,7b\n" " .long 25b,8b\n" " .long 5b,8b\n" ".previous" : "=a"(to), "=d"(n) : "r"(n & 3), "r"(0), "0"(to), "1"(n/4)); return n; } #endif /* _M68K_UACCESS_H */
Go to most recent revision | Compare with Previous | Blame | View Log