OpenCores
URL https://opencores.org/ocsvn/or1k/or1k/trunk

Subversion Repositories or1k

[/] [or1k/] [trunk/] [linux/] [linux-2.4/] [include/] [asm-ppc64/] [vio.h] - Rev 1765

Compare with Previous | Blame | View Log

/*
 * IBM PowerPC Virtual I/O Infrastructure Support.
 *
 * Dave Engebretsen engebret@us.ibm.com
 *    Copyright (c) 2003 Dave Engebretsen
 *
 *      This program is free software; you can redistribute it and/or
 *      modify it under the terms of the GNU General Public License
 *      as published by the Free Software Foundation; either version
 *      2 of the License, or (at your option) any later version.
 */
 
#ifndef _VIO_H
#define _VIO_H
 
#include <linux/init.h>
#include <linux/errno.h>
#include <asm/hvcall.h>
#include <asm/prom.h>
#include <asm/scatterlist.h>
/*
 * Architecture-specific constants for drivers to
 * extract attributes of the device using vio_get_attribute()
*/
#define VETH_MAC_ADDR "local-mac-address"
#define VETH_MCAST_FILTER_SIZE "ibm,mac-address-filters"
 
/* End architecture-specific constants */
 
#define h_vio_signal(ua, mode) \
  plpar_hcall_norets(H_VIO_SIGNAL, ua, mode)
 
#define VIO_IRQ_DISABLE		0UL
#define VIO_IRQ_ENABLE		1UL
 
struct vio_dev;
struct vio_driver;
struct vio_device_id;
struct TceTable;
 
int vio_register_driver(struct vio_driver *drv);
int vio_unregister_driver(struct vio_driver *drv);
const struct vio_device_id * vio_match_device(const struct vio_device_id *ids,
						const struct vio_dev *dev);
struct vio_dev * __devinit vio_register_device(struct device_node *node_vdev);
struct vio_driver * __devinit vio_find_driver(struct vio_dev* dev);
const void * vio_get_attribute(struct vio_dev *vdev, void* which, int* length);
int vio_get_irq(struct vio_dev *dev);
struct TceTable * vio_build_tce_table(struct vio_dev *dev);
int vio_enable_interrupts(struct vio_dev *dev);
int vio_disable_interrupts(struct vio_dev *dev);
 
dma_addr_t vio_map_single(struct vio_dev *dev, void *vaddr,
			  size_t size, int direction);
void vio_unmap_single(struct vio_dev *dev, dma_addr_t dma_handle,
		      size_t size, int direction);
int vio_map_sg(struct vio_dev *vdev, struct scatterlist *sglist,
	       int nelems, int direction);
void vio_unmap_sg(struct vio_dev *vdev, struct scatterlist *sglist,
		  int nelems, int direction);
void *vio_alloc_consistent(struct vio_dev *dev, size_t size,
			   dma_addr_t *dma_handle);
void vio_free_consistent(struct vio_dev *dev, size_t size, void *vaddr,
			 dma_addr_t dma_handle);
 
struct vio_device_id {
	char *type;
	char *compat;
/* I don't think we need this
	unsigned long driver_data;	*/ /* Data private to the driver */
};
 
struct vio_driver {
	struct list_head node;
	char *name;
	const struct vio_device_id *id_table;	/* NULL if wants all devices */
	int  (*probe)  (struct vio_dev *dev, const struct vio_device_id *id);	/* New device inserted */
	void (*remove) (struct vio_dev *dev);	/* Device removed (NULL if not a hot-plug capable driver) */
	unsigned long driver_data;
};
 
struct vio_bus;
/*
 * The vio_dev structure is used to describe virtual I/O devices.
 */
struct vio_dev {
	struct list_head devices_list;   /* node in list of all vio devices */
	struct device_node *archdata;    /* Open Firmware node */
	struct vio_bus *bus;            /* bus this device is on */
	struct vio_driver *driver;      /* owning driver */
	void *driver_data;              /* data private to the driver */
	unsigned long unit_address;
 
	struct TceTable *tce_table; /* vio_map_* uses this */
	unsigned int irq;
	struct proc_dir_entry *procent; /* device entry in /proc/bus/vio */
};
 
struct vio_bus {
	struct list_head devices;       /* list of virtual devices */
};
 
 
static inline int vio_module_init(struct vio_driver *drv)
{
	int rc = vio_register_driver (drv);
 
	if (rc > 0)
		return 0;
 
	/* iff CONFIG_HOTPLUG and built into kernel, we should
	 * leave the driver around for future hotplug events.
	 * For the module case, a hotplug daemon of some sort
	 * should load a module in response to an insert event. */
#if defined(CONFIG_HOTPLUG) && !defined(MODULE)
	if (rc == 0)
		return 0;
#else
	if (rc == 0)
		rc = -ENODEV;
#endif
 
	/* if we get here, we need to clean up vio driver instance
	 * and return some sort of error */
 
	return rc;
}
 
#endif /* _PHYP_H */
 

Compare with Previous | Blame | View Log

powered by: WebSVN 2.1.0

© copyright 1999-2024 OpenCores.org, equivalent to Oliscience, all rights reserved. OpenCores®, registered trademark.